im trying to get som stuff of from my phone to a usb stick, but as soon as i put it in my phone, my sdcard disappears and instead is some kind of duplicate of my usb stick. as u can see on the picture below, sdcard and usb stick is the same size, and the content is exacly the also. as soon as i unmount my usb stick, my sdcard shows me 0kb size. after a reboot is my sdcard back as usual.. but ibstill cant use sdcard and usb stick at the same time..
got an rooted z3 with 6.0.1
http://uploads.tapatalk-cdn.com/20160608/7aaec63bdbb9ee74e5ebd5881fd17dba.jpg
Sent from my D6603 using Tapatalk
Related
Hi!
I can't seem the usb drive to work with vegan beta4. Is this suppost to work or is it something i must install for it to recognize my usb thumb ?
DaMan said:
Hi!
I can't seem the usb drive to work with vegan beta4. Is this suppost to work or is it something i must install for it to recognize my usb thumb ?
Click to expand...
Click to collapse
Not 100 percent sure but i beleive someone said that you need to boot the device with the usb plugged in for it to recognize some drives?
dragonfly1113 said:
Not 100 percent sure but i beleive someone said that you need to boot the device with the usb plugged in for it to recognize some drives?
Click to expand...
Click to collapse
I tried that but no result.
thx
It should be listed as usbdrive using your favorite file manager. Usually under
...
...
sdcard
sdcard2
usbdrive
Its not like windows. It doesn't pop up with a window when you plug it in. Flash drive must be formatted fat32. Android doesn't like ntfs
thebadfrog said:
It should be listed as usbdrive using your favorite file manager. Usually under
...
...
sdcard
sdcard2
usbdrive
Its not like windows. It doesn't pop up with a window when you plug it in. Flash drive must be formatted fat32. Android doesn't like ntfs
Click to expand...
Click to collapse
I do see the USB drive bit it's always empty. USB drive is fat32 formatted.
Using a USB mouse works great. I don't get a popup which notifies me about a connected usb drive like my archos 101 did.
Did a little discovery:
When connecting the tab to pc with a usb cable only then a "mount usb" message pops up.
Then a usb drive will work.
Now how do i get the gtab to mount the usb drive ?
I don't think any of these roms are gonna give you a popup when you load a usb drive. I just plugged one in on tnt 3.1 and it reads it thru file manager. I was on vegan beta4 and did the same thing yesterday
Edit: usb disk not usb drive
When you connect a cable from your pc to the tablet the pop up is to allow the tab to unmount the internal sdcard so your pc can read it.
thebadfrog said:
I don't think any of these roms are gonna give you a popup when you load a usb drive. I just plugged one in on tnt 3.1 and it reads it thru file manager. I was on vegan beta4 and did the same thing yesterday
Edit: usb disk not usb drive
Click to expand...
Click to collapse
I do not understand...what is location of the usb files then ?
Open iFileManager and hit the icon that looks like a house. Scroll down and you will find a folder named usbdisk. That is your usb drive. Open the folder. I'm assuming the usb drive is plugged in
thebadfrog said:
Open iFileManager and hit the icon that looks like an icon. Scroll down and you will find a folder named usbdisk. That is your usb drive. Open the folder. I'm assuming the usb drive is plugged in
Click to expand...
Click to collapse
/usbdrive is empty.
It becomes populates when i insert a mini usb cable and connect it to the pc.
This give me the mount option and only then i see files under /usbdrive.
idk then, I never had a problem reading the usb drive on vegan beta4. Sorry I can't help
OK, found it.
I have to unmount the sdcard first. Then the usb drive shows with files.
Thanks.
Cool....You may wanna drop a note in the vegan thread on what you did. Maybe others have had the same issue.
DaMan said:
OK, found it.
I have to unmount the sdcard first. Then the usb drive shows with files.
Thanks.
Click to expand...
Click to collapse
Hey. I just got a USB Flash Drive and tried connecting it to my GTab but no dice. I am running Vegan 5.1 and using ES File Explore. I navigate to the root directory and see sdcard, sdcard2, and usbdisk. Sdcard and sdcard2 has my internal storage and my micro usb storage files respectively. But nothing pops us in usbdisk. I tried removing the microsd, rebooting with the USB inserted, and unmounting the microSD but no dice.
Any hints?
Thanks,
Scott
Update: So I tried going to settings and unmounting the sdcard and now I can see the USBdisk. Odd. If I want to transfer data from one drive to another, I cant accomplish that because the SDcard is unmounted. Also all my appdata and stuff are not present. Any way to have both of these drives mounted at the same time?
Thanks
I get the fact about the SDCard issue, however, can I hook the Xoom up using the MicroUSB and copy stuff to internal storage and SDCard, or do I have to remove the card and copy stuff to it using my adapter in the PC?
yes u can hook up ur xoom to ur laptop or whatever with the microsd, when u plug it let it install then go to my computer, click xoom, wait til you see the hard drive, then open that and you'll see your folders as if it was a sdard
Hi to all!
Here's the problem that I have.
After upgrading my Xoom (US 3G) to Tiamat 2.1 Hammerhead USBOTG stopped to work. When I try to connect flashdrive via this cable it blinks only once and that's all. The folder USBOtg is empty -> nothing is shown (but I know that there are files). I tried to format flashdrive to various filesystems (NTFS, FAT32) -> no result.
Another strange thing after upgrade is with MicroSD folder. It shows me only old data. All new one that I copied to it via PC it doesn't show at all. AND!!! PC doesn't see the content of folder with name "external" on Xoom but when I copy there files from PC then Xoom can see them.
May anyone advice any steps to return usbotg and microsd in normal working state?
I tried to re-flash Xoom with previous various versions of firmwares (mods) -> the same situation.
BR, akadimka
akadimka said:
Hi to all!
Here's the problem that I have.
After upgrading my Xoom (US 3G) to Tiamat 2.1 Hammerhead USBOTG stopped to work. When I try to connect flashdrive via this cable it blinks only once and that's all. The folder USBOtg is empty -> nothing is shown (but I know that there are files). I tried to format flashdrive to various filesystems (NTFS, FAT32) -> no result.
Another strange thing after upgrade is with MicroSD folder. It shows me only old data. All new one that I copied to it via PC it doesn't show at all. AND!!! PC doesn't see the content of folder with name "external" on Xoom but when I copy there files from PC then Xoom can see them.
May anyone advice any steps to return usbotg and microsd in normal working state?
I tried to re-flash Xoom with previous various versions of firmwares (mods) -> the same situation.
BR, akadimka
Click to expand...
Click to collapse
Two different issues--if you read the release notes with the Hammerhead Rom, Team Tiamat removed the USB Mass Storage enabling that had been in earlier Rom, due to various difficulties. So that means you can no longer use your PC to copy files into the micro sd card in the Xoom, but you can cop files directly to the sdcard using an adapter or card reader. Your Xoom should still have access to the files on your micro sd card at mnt/external1.
The usbOTG works fine for me but it needs the help of an app like USB Mass Storage Watcher OTG or Drive Mount. Both will work. It also helps to reboot with the drive plugged in the first time if you are having a hard time getting the Xoom to recognize it.
Thanx! Drive Mount helped me with recognizing and mounting flash drive (but only after Xoom reboot with drive plugged in). USB Storage Watcher OTG crashes everytime when I start it with drive connected -> with disconnected it starts normally but won't see any after-connected drives. Ssems that I'll use Drive Mount program
As for MicroSD -> even connected directly to PC and copied some files to it Xoom still sees only old data. Any ideas?
BR, Dmitry
Sent from my Xoom using XDA Premium App
akadimka said:
Thanx! Drive Mount helped me with recognizing and mounting flash drive (but only after Xoom reboot with drive plugged in). USB Storage Watcher OTG crashes everytime when I start it with drive connected -> with disconnected it starts normally but won't see any after-connected drives. Ssems that I'll use Drive Mount program
As for MicroSD -> even connected directly to PC and copied some files to it Xoom still sees only old data. Any ideas?
BR, Dmitry
Sent from my Xoom using XDA Premium App
Click to expand...
Click to collapse
Actually, try checking the folder mnt/external1 (1) as this is HC3.2's official mount point. The Microsd mount point is an artifact of an older Rom.
i am using hammerhead rom with tachi kernel.
yup the usb otg not working.
tried both usb watcher and drive mount.
rohit3192 said:
i am using hammerhead rom with tachi kernel.
yup the usb otg not working.
tried both usb watcher and drive mount.
Click to expand...
Click to collapse
Make sure that you are using a REAL usbOTG cable.
A real USB otg cable? What needs to be special about the cable in order for it to work?
Sent from my Nexus One using xda premium
msavic6 said:
A real USB otg cable? What needs to be special about the cable in order for it to work?
Sent from my Nexus One using xda premium
Click to expand...
Click to collapse
This is where I will suggest that you do some research. Start with this forum and then search elsewhere. Just today I have answered this question 3 times. Search on my name and you will see my posts with your answer.
i am using micro usb male to normal usb female.
cable is gold plated and branded.
but others have also mentioned that usbotg not working after they updated to 3.2
though i never tested on 3.1
rohit3192 said:
i am using micro usb male to normal usb female.
cable is gold plated and branded.
but others have also mentioned that usbotg not working after they updated to 3.2
though i never tested on 3.1
Click to expand...
Click to collapse
Your cable will never work because it is not OTG. OTG has a different pin configuration to allow the Xoom to function in usb host mode. If you are handy with a soldering iron you could make one, but why not buy one, they are availble. Here is my Google search for USBOTG Xoom to get you started: http://www.google.com/search?hl=en&source=hp&q=usb+otg+xoom&aq=2s&aqi=g1g-s9&aql=&oq=usbOTG
good afternoon,
I hope some one can help me.
about 2 weeks ao i installed the revolution Rom on my asus eee pad transformer.
But now the USB ports of my dckingstation are not beiing regonized any more when i put a usb stick or something in it.
Any one that has an solution for it?
Restart your tablet.
For me restarting after inserting sticks or cards brings them up. You need to reboot each time. Will show both usb and SD if all inserted and then you reboot.
Sent from my Transformer TF101 using Tapatalk
Restarting device with the USB stick or external harddrive doesn't work.
He only see's my micro sd-card
i'm also getting E:unable to open ums lunfile(no Such file or directory) error when i'm in recovery mode and want to mount the usb device.
any solution for this problem?
I have still got the problem.
I have tried a usb mounting app but that app doesn't find my usbstick or my usb harddrive.
Sorry for the title but I didnt know how could I describe it more precisely.
Problem is. I rooted gf`s htc explorer and I didnt have sd adapter so I tried to format micro sd via minitool partition wizard while it was inside phone connected via usb to pc.
After that I lost possibility to change usb mode from charging to file transfer since my card doesnt show up on pc/mobile/cwm anymore. EXCEPT "mount usb storage" in cwm. With that I see the card in pc, I can reformat it or transfer files. But I cant use it its not visible at all..only in that cwm mount usb storage.
I was browsing web/xda for like 2 hours and im quite desperate.
Any help how to make it visible again?
Its only unlocked-rooted-stock..was preparing it for link2sd.
thank a lot for a help