Database Info

[Q] RAZR HD XT 925 Boots into recovery by default

So, today I trade my HTC One for a RAZR XT925, $350, and a water proof 32GB Sandisk ultra sd card on Kijiji. I thought it was kinda weird to get all of this stuff, but it seemed fine at the time. Afterwards however, I found out that every time you turn off or reboot the phone, it tried to go into recovery mode or something with the android guy and a bar at the bottom in a loop and always factory reset the phone, so no matter what, every time you turned it off, it'd reset it. After hours and hours of work, I have the bootloader unlocked, rooted, CWM installed, and Cynogenmod also installed. It no longer factory resets it (I think, but i sent a text to a random number and when I rebooted it was still there), however, everytime i power off and power on, it goes into recovery mode. This is very annoying and will make it very hard to sell again, but if I can fix this last thing, I'll have a solid phone until the waterproof S4 comes out as well as having made like $100.
So basically, I need to know what to do to make it boot into the rom by default and not the recovery. Also, I searched it up and someone else had a problem where they kept booting into AP fastboot mode I think, I tried that line, it said successful, but it didnt work. For me, it's booting into the recovery by default.

Does it boot into stock recovery?
Sent from my Galaxy Nexus using xda premium

recovery
jmcdonald58 said:
Does it boot into stock recovery?
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
I root it, unlocked the boot loader, flashed cwm recovery, and installed CyanogenMod. Now it boots into cwm recovery by default and if I click reboot system now, it just boots back into cwm. Only way to get to the system is to go to the boot menu by pressing all three buttons and selecting boot normally.
Stock recovery is gone. Cwm asked to replace it so that the phone doesn't reinstall it on reboot. Cwm doesn't, but when the phone booted it stock recovery, it used to get wiped.

roguezz said:
I root it, unlocked the boot loader, flashed cwm recovery, and installed CyanogenMod. Now it boots into cwm recovery by default and if I click reboot system now, it just boots back into cwm. Only way to get to the system is to go to the boot menu by pressing all three buttons and selecting boot normally.
Stock recovery is gone. Cwm asked to replace it so that the phone doesn't reinstall it on reboot. Cwm doesn't, but when the phone booted it stock recovery, it used to get wiped.
Click to expand...
Click to collapse
Strange If it was me I would try a toolkit and redo the whole process something went wrong somewhere wish I could help Good Luck

recovery
jmcdonald58 said:
Strange If it was me I would try a toolkit and redo the whole process something went wrong somewhere wish I could help Good Luck
Click to expand...
Click to collapse
No the problem was in stock. When I got it it wasn't rooted or anything, rooting helped fix the problem partially by not making it wipe every time I boot it. Now the only problem is that whenever I boot it up after a shut down or restart, it boots into recovery mode instead of the ROM.

roguezz said:
No the problem was in stock. When I got it it wasn't rooted or anything, rooting helped fix the problem partially by not making it wipe every time I boot it. Now the only problem is that whenever I boot it up after a shut down or restart, it boots into recovery mode instead of the ROM.
Click to expand...
Click to collapse
did you ever find a solution for this? I just bought a used phone and am facing the same problem - I can't even boot into recovery, it will just start bootlooping again. Only thing that seems to be working is fastbood mode. (or regular reboot, but then everything is wiped every time)

coldtech said:
did you ever find a solution for this? I just bought a used phone and am facing the same problem - I can't even boot into recovery, it will just start bootlooping again. Only thing that seems to be working is fastbood mode. (or regular reboot, but then everything is wiped every time)
Click to expand...
Click to collapse
Fastboot the stock ROM. That should return the phone to it's bone stock condition.
Sent from my DROID RAZR HD using Tapatalk 4

mentose457 said:
Fastboot the stock ROM. That should return the phone to it's bone stock condition.
Sent from my DROID RAZR HD using Tapatalk 4
Click to expand...
Click to collapse
trying right now. RSDLite is giving me an "unknown fastboot command getvar" error...still trying to figure out why.

coldtech said:
trying right now. RSDLite is giving me an "unknown fastboot command getvar" error...still trying to figure out why.
Click to expand...
Click to collapse
I wouldnt mess with RSDLite. Google gave us fastboot for a reason.

mentose457 said:
I wouldnt mess with RSDLite. Google gave us fastboot for a reason.
Click to expand...
Click to collapse
is there an alternative to flash the stock ROM on a locked device?

coldtech said:
is there an alternative to flash the stock ROM on a locked device?
Click to expand...
Click to collapse
Use this utility: http://forum.xda-developers.com/showthread.php?t=2241788
Use the 'Lite' version as it includes the stock rom.

mentose457 said:
Use this utility: http://forum.xda-developers.com/showthread.php?t=2241788
Use the 'Lite' version as it includes the stock rom.
Click to expand...
Click to collapse
Thanks for the hint, will give it a try. RSDLite just completed flashing, but the odd behaviour of the phone is still the same. Guess I might just have a broken phone... :/

mentose457 said:
Use this utility: http://forum.xda-developers.com/showthread.php?t=2241788
Use the 'Lite' version as it includes the stock rom.
Click to expand...
Click to collapse
After a few hours, I (somehow) ended up being able to enter recovery. On the downside though, now it always goes automatically into fastboot, because everything seems to be screwed up. I even got CWM installed though (unlocked the device because I didn't know what else to do).
Now every time it goes into fastboot, the reason given is: "sticky bit fastboot"
Any ideas left?
Oh btw, I have a german phone, in case that matters somehow. I can't flash in any fastboot way anymore, now I always get some message about a downgraded version. Of course details can be supplied if needed.
edit: was now able to flash CM, no idea what I did so that it didn't give me errors anymore. It still goes into fastboot by default on every reboot though, I always need to select "reboot device" manually every time.

coldtech said:
After a few hours, I (somehow) ended up being able to enter recovery. On the downside though, now it always goes automatically into fastboot, because everything seems to be screwed up. I even got CWM installed though (unlocked the device because I didn't know what else to do).
Now every time it goes into fastboot, the reason given is: "sticky bit fastboot"
Any ideas left?
Oh btw, I have a german phone, in case that matters somehow. I can't flash in any fastboot way anymore, now I always get some message about a downgraded version. Of course details can be supplied if needed.
edit: was now able to flash CM, no idea what I did so that it didn't give me errors anymore. It still goes into fastboot by default on every reboot though, I always need to select "reboot device" manually every time.
Click to expand...
Click to collapse
Sounds like you are able to use the phone. That’s good.
The error is saying it can’t downgrade the trust zone (tz) right? That is normal for a phone with an unlocked bootloader. You can simply ignore that.
The sticky bit fastboot problem looks like it can be fixed by issuing this command while in fastboot mode: fastboot oem fb_mode_clear

mentose457 said:
Sounds like you are able to use the phone. That’s good.
The error is saying it can’t downgrade the trust zone (tz) right? That is normal for a phone with an unlocked bootloader. You can simply ignore that.
The sticky bit fastboot problem looks like it can be fixed by issuing this command while in fastboot mode: fastboot oem fb_mode_clear
Click to expand...
Click to collapse
the fb_mode_clear was the culprit, thanks a lot!
and the error says: "downgraded security version. update gpt_main version failed. preflash validation failed for GPT" - which is still keeping me from flashing stuff via fastboot.
since I can't fastboot flash at the moment: do you happen to know where I can get the german modem image so that I can flash it using CWM? I think through all the flashing and trying I have a corrupt or wrong modem file (probably the US version). I can not log into the carrier network right now. it asks me for my SIM PIN and unlocks the SIM, but that's it. so I can't make phone calls or anything right now.

[Q] Yet Another Potential Brick

Hello,
Earlier today I installed BAKED ROM on my AT&T HTC ONE XL that was at the time running CM 10.1 After having some issues with wifi not working I decided to restore from my backup made in CWR when installing CM 10.1 on my phone. After the restore finished i was stuck in a bootloop. So i went back into CWR to re install the BAKED ROM. Once i cleared drive i came to realize that i somehow deleted the .zip files for the ROM on my phone and no longer had a ROM to install. After that i decided that I would mount my phone from CWR so i can transfer the .zip to my phone and then install. After realizing i need to use TWRP to be able to mount and transfer files i was going to flash over TWRP in fastboot. My issue currently is that my phone is powered off after telling it to shutdown in bootloader, and i can not get it to turn back on or to boot into bootloader so that i can flash TWRP. Hopefully i am missing something small here. Any advise is appreciated.
Thank You

coltp10 said:
Hello,
Earlier today I installed BAKED ROM on my AT&T HTC ONE XL that was at the time running CM 10.1 After having some issues with wifi not working I decided to restore from my backup made in CWR when installing CM 10.1 on my phone. After the restore finished i was stuck in a bootloop. So i went back into CWR to re install the BAKED ROM. Once i cleared drive i came to realize that i somehow deleted the .zip files for the ROM on my phone and no longer had a ROM to install. After that i decided that I would mount my phone from CWR so i can transfer the .zip to my phone and then install. After realizing i need to use TWRP to be able to mount and transfer files i was going to flash over TWRP in fastboot. My issue currently is that my phone is powered off after telling it to shutdown in bootloader, and i can not get it to turn back on or to boot into bootloader so that i can flash TWRP. Hopefully i am missing something small here. Any advise is appreciated.
Thank You
Click to expand...
Click to collapse
hold the power button down for about 15 seconds. wait for 5 seconds, then press the power button and volume down at the same time after a few seconds you should get the bootloader screen.
does the led come on when you're charging it?

cr1960 said:
hold the power button down for about 15 seconds. wait for 5 seconds, then press the power button and volume down at the same time after a few seconds you should get the bootloader screen.
does the led come on when you're charging it?
Click to expand...
Click to collapse
Thank you for your response. From following your instructions i was still not able to get into bootloader, and when i plug it in to charge the LED does not come on

coltp10 said:
Thank you for your response. From following your instructions i was still not able to get into bootloader, and when i plug it in to charge the LED does not come on
Click to expand...
Click to collapse
Sadly based on my knowledge and experience(I learned this the hard way by taking the ATT OTA) if the led doesn't come on while charging and you cant access your bootloader your phone is sadly dead. However you can double check to see if its your cord and if it is not then call HTC if device is still under warranty. They replaced the internals of mine and recieved it back at no charge.
If I have helped in any way hit the Thanks button please.

Why did you "need" to go to TWRP to mount SD? Clockworkmod has had SD mount fixed for some time now, hasn't it?
Leave the phone on wall charger (not connected to computer) overnight or 8 Hrs or so, and see if you get any LED's or can get into bootloader. If you were only messing with ROMs and recovery, I don't see how you can be bricked (as long as anything you were trying to flash was for the EVITA). The battery may just have run down while you were messing with the device.

redpoint73 said:
Why did you "need" to go to TWRP to mount SD? Clockworkmod has had SD mount fixed for some time now, hasn't it?
Leave the phone on wall charger (not connected to computer) overnight or 8 Hrs or so, and see if you get any LED's or can get into bootloader. If you were only messing with ROMs and recovery, I don't see how you can be bricked (as long as anything you were trying to flash was for the EVITA). The battery may just have run down while you were messing with the device.
Click to expand...
Click to collapse
Well when i went into clockworkmod and told it to mount SD it did not work, i have all of my drivers installed properly so it couldn't be a driver issue. So i figured that i would just flash over TWRP and use mount to usb as a second shot. I will have to try and leave it plugged in later after work. Yes the ROM that i installed was for the EVITA, it was running fine except the wifi wouldnt turn on.

coltp10 said:
Well when i went into clockworkmod and told it to mount SD it did not work, i have all of my drivers installed properly so it couldn't be a driver issue.
Click to expand...
Click to collapse
If/when you get back up and running, if still on CWM, make sure its up to date. I think the SD mount was fixed quite some time ago.

redpoint73 said:
If/when you get back up and running, if still on CWM, make sure its up to date. I think the SD mount was fixed quite some time ago.
Click to expand...
Click to collapse
Okay thanks for the input i will check it out as soon as I am able

When i came home from work and plugged it in the red LED light came on. After letting it charge for about 5 hours i tried to access the bootloader by pressing power down for 15 seconds, then waiting 5, and then power and volume down, to no result. Only when holding down power for the first 15 seconds the soft on screen keys did flash

coltp10 said:
When i came home from work and plugged it in the red LED light came on. After letting it charge for about 5 hours i tried to access the bootloader by pressing power down for 15 seconds, then waiting 5, and then power and volume down, to no result. Only when holding down power for the first 15 seconds the soft on screen keys did flash
Click to expand...
Click to collapse
After holding the power button down and let the capacitive keys flash 6 times. The 6 flashes means a hard reset and it's about to start rebooting. Let go of the power button and immediately hold volume down. It should take you into the bootloader. Then you can fastboot flash TWRP.
Sent from my HTC One X using Tapatalk 2

Thank you
Finally after letting it charge all night, i was able to access my bootloader, i flashed over TWRP and am in the process of mounting my sd to transfer the rom and hopefully install. Thank you all for you help!!

coltp10 said:
Finally after letting it charge all night, i was able to access my bootloader, i flashed over TWRP and am in the process of mounting my sd to transfer the rom and hopefully install. Thank you all for you help!!
Click to expand...
Click to collapse
Good luck
Sent from my HTC One X using xda premium

Well i was able to install cm 10.1 back to my phone and successfully load it, my only issue now as before when i installed the BAKED rom, is my wifi doesn't seem to work or recognize any networks

coltp10 said:
Well i was able to install cm 10.1 back to my phone and successfully load it, my only issue now as before when i installed the BAKED rom, is my wifi doesn't seem to work or recognize any networks
Click to expand...
Click to collapse
Glad you got it working.
What hboot are you on? If you are on one of the newer ones, not 1.09, and don't have s-off you have to manually flash the boot.img through fastboot after installing the ROM. That sounds like it might be your issue.

pside15 said:
Glad you got it working.
What hboot are you on? If you are on one of the newer ones, not 1.09, and don't have s-off you have to manually flash the boot.img through fastboot after installing the ROM. That sounds like it might be your issue.
Click to expand...
Click to collapse
Agreed, i did forget to flash to boot image during my excitement to a working phone again, even so, if i hadn't flashed the boot image why is it that my phone was actually able to start up the rom and go through phone system setup?

coltp10 said:
Agreed, i did forget to flash to boot image during my excitement to a working phone again, even so, if i hadn't flashed the boot image why is it that my phone was actually able to start up the rom and go through phone system setup?
Click to expand...
Click to collapse
because the rom you flashed is based on CM so it was compatible enough to boot but not have everything working as it should. if you don't flash the boot.img, the previously used kernel would still be used.

The ROM was running and i was able to use my phone. Then i flashed over the boot.img for my rom and now it doesnt boot up it is stuck at the Cyanogen Mod loading screen

coltp10 said:
The ROM was running and i was able to use my phone. Then i flashed over the boot.img for my rom and now it doesnt boot up it is stuck at the Cyanogen Mod loading screen
Click to expand...
Click to collapse
boot to recovery, wipe everything (cache, dalvik, system, factory reset), reflash the rom you want to use, then reboot to bootloader and fastboot flash boot boot.img extracted from the rom you just flashed.
Not sure where you went wrong but that will get you booting. To avoid having to fastboot flash boot boot.img everytime, you can S-OFF.

exad said:
boot to recovery, wipe everything (cache, dalvik, system, factory reset), reflash the rom you want to use, then reboot to bootloader and fastboot flash boot boot.img extracted from the rom you just flashed.
Not sure where you went wrong but that will get you booting. To avoid having to fastboot flash boot boot.img everytime, you can S-OFF.
Click to expand...
Click to collapse
I will have to look into the S-OFF. As of right now i wiped everything, installed rom, installed gaps, went to bootloader flashed boot.img and now just waiting to see if it will start up

coltp10 said:
I will have to look into the S-OFF. As of right now i wiped everything, installed rom, installed gaps, went to bootloader flashed boot.img and now just waiting to see if it will start up
Click to expand...
Click to collapse
You can also use the flash image GUI app to flash a boot image in Android right before you boot to recovery to flash the ROM. But I would definitely look into s-off. It's a very easy process and then you don't ever have to worry about the boot.img at all.

[Q] Can't boot into recovery

Trying to install CyanogenMod for my razr maxx HD. Recently used RSDlite to install 183.46.10 after OTA KK update kept failing. Then used towelroot to root and motopocalype to unlock bootloader. Fastboot screen shows bootloader is unlocked with status code: 3.
I then followed the instructions on the CyanogenMod site to flash CWM 6.0.4.4 recovery using fastboot, and all appeared to work fine.
However, when I try to reboot into recovery, nothing happens. I get hung up on the motorola dual core flashscreen for about a minute or two, then the screen goes black, then the phone reboots normally.
I tried flashing a different copy of CWM, tried TRWP, and tried several third party apps from Google Play store to boot directly into recovery using software reboot instead of hardware keys - all with the same results. I even tried flashing custom CWM recovery using ROM Manager and Rashr, same result.
Do I have a corrupt recovery partition? Any suggestions for how to fix?

You need to install a recovery for that phone specifically.
http://androidhosting.org/Devs/Dhacker29/
Use the recovery files found here.
Edit: on the site I posted, browse to the msm8690 folder. There you will find the recovery files.

to make this even easier here
TWRP http://forum.xda-developers.com/showthread.php?t=2776515
CWM http://forum.xda-developers.com/showthread.php?t=2747535
next time be sure your flashing for this phone and bootloader

billycar11 said:
to make this even easier here
TWRP http://forum.xda-developers.com/showthread.php?t=2776515
CWM http://forum.xda-developers.com/showthread.php?t=2747535
next time be sure your flashing for this phone and bootloader
Click to expand...
Click to collapse
Thanks, guys, total noob mistake. I knew the recovery needed to be specific for the phone, but didn't realize it varied depending on the bootloader. Will try again with the right recovery!

billycar11 said:
to make this even easier here
TWRP http://forum.xda-developers.com/showthread.php?t=2776515
CWM http://forum.xda-developers.com/showthread.php?t=2747535
next time be sure your flashing for this phone and bootloader
Click to expand...
Click to collapse
Those recovery aren't sticking for me. Does anyone have a suggestion to fix that issue.
Pushing the buttons doesn't work.
The only thing that is working is place the phone in fastboot mode and flash the recovery to my device three time and then I will go straight in recovery and there it is.
Sent from my SM-N900V using Tapatalk

TheGman125 said:
Those recovery aren't sticking for me. Does anyone have a suggestion to fix that issue.
Pushing the buttons doesn't work.
The only thing that is working is place the phone in fastboot mode and flash the recovery to my device three time and then I will go straight in recovery and there it is.
Sent from my SM-N900V using Tapatalk
Click to expand...
Click to collapse
Your phone has been upgraded to Kit Kat and the bootloader unlocked, correct? The two recoveries linked to are for phones that already have already been upgraded to KK.
If so, power off your phone.
Then, hold down volume up and then press and hold power. After a few seconds, let go and the boot menu should come up.
Use Volume down to select "Recovery" and then hit "Volume Up". That should boot you into the custom recovery, depending on which one you flashed.
I prefer TWRP. CWM seemed buggy and it wouldn't always boot into it. A lot of times, I'd get a blank screen and would have to reflash it.
Another option is, when it's booted up, hooked up your phone to your pc and use adb to reboot it into recovery using "adb reboot recovery".

iBolski said:
Your phone has been upgraded to Kit Kat and the bootloader unlocked, correct? The two recoveries linked to are for phones that already have already been upgraded to KK.
If so, power off your phone.
Then, hold down volume up and then press and hold power. After a few seconds, let go and the boot menu should come up.
Use Volume down to select "Recovery" and then hit "Volume Up". That should boot you into the custom recovery, depending on which one you flashed.
I prefer TWRP. CWM seemed buggy and it wouldn't always boot into it. A lot of times, I'd get a blank screen and would have to reflash it.
Another option is, when it's booted up, hooked up your phone to your pc and use adb to reboot it into recovery using "adb reboot recovery".
Click to expand...
Click to collapse
Yep.. I had some issue with my devices. I tried the update well root and the devices didn't want to boot up anymore. So I had to RSD lite the devices back to health. So I do have the latest software for the devices. I guess. I am going to use Twrp since you say it boots fine from the boot menu.

TheGman125 said:
Yep.. I had some issue with my devices. I tried the update well root and the devices didn't want to boot up anymore. So I had to RSD lite the devices back to health. So I do have the latest software for the devices. I guess. I am going to use Twrp since you say it boots fine from the boot menu.
Click to expand...
Click to collapse
Is your bootloader unlocked? If not, that is your problem. You need to root, and then unlock the bootloader before you can flash TWRP and use CM.

iBolski said:
Is your bootloader unlocked? If not, that is your problem. You need to root, and then unlock the bootloader before you can flash TWRP and use CM.
Click to expand...
Click to collapse
Yes my bootloader is unlocked. Have code 3 on the devices.

try and unplug from USB when you reboot

[Q] Can't get to recovery after (successful) upgrade to KK.

Hi,
just got time to update my 2nd XT925 to KK (RSD'd back from CM11 JBBL to stock SFR rom, let the phone find its update and apply it, everything went fine).
But whatever KK recovery I try to flash, it gives me an exclamation mark and nothing else (I'm unlocked, yes).
Don't know what's happening here. Can someone helps please ?

Poursinet said:
Hi,
just got time to update my 2nd XT925 to KK (RSD'd back from CM11 JBBL to stock SFR rom, let the phone find its update and apply it, everything went fine).
But whatever KK recovery I try to flash, it gives me an exclamation mark and nothing else (I'm unlocked, yes).
Don't know what's happening here. Can someone helps please ?
Click to expand...
Click to collapse
Are you saying you are trying to flash a recovery or are you trying to GET to the stock recovery? If you are trying to get to the stock recovery, the key presses to get to it have changed.
Your best bet is to power off your phone. Then, press and hold power+vol up for a few seconds until you see the menu come up. Then, press vol down to highlight Recovery and then press the vol up button.
Eventually, you'll see the "Dead Andy". From there, press and hold vol down+vol up+power. You might have to do it a couple of times. Eventually, you'll be in the recovery but for the XT926, it's kind of hard to read because for some reason, they decided to make it dim.

No (but thanks anyway). What I tried to was only to install a KK recovery for CM11.
I successed but I had 2 problems mixed: the 1st one was that the Linux version of fastboot (or mfastboot) did'nt work with the new bootloader. Both were complaining about "(bootloader) Variable not supported! ". Had to find some old laptop with Windows installed to use it to flash the recovery without error.
But even then if I just let the phone reboot, I would'nt get the new recovery (just the stock one after the keypress you speak about). I had to go straight from bootloader screen to the recovery (by manually rebooting) to get it work. Looks like the standard boot just restored the stock recovery each time I tried.
Thanks anyway, it's working now.

Poursinet said:
No (but thanks anyway). What I tried to was only to install a KK recovery for CM11.
I successed but I had 2 problems mixed: the 1st one was that the Linux version of fastboot (or mfastboot) did'nt work with the new bootloader. Both were complaining about "(bootloader) Variable not supported! ". Had to find some old laptop with Windows installed to use it to flash the recovery without error.
But even then if I just let the phone reboot, I would'nt get the new recovery (just the stock one after the keypress you speak about). I had to go straight from bootloader screen to the recovery (by manually rebooting) to get it work. Looks like the standard boot just restored the stock recovery each time I tried.
Thanks anyway, it's working now.
Click to expand...
Click to collapse
Variable not supported comes up under some Windows, but it usually still works.
You never go straight to the bootloader when you reboot. You have to reboot the phone (or turn it off first) and then press and hold vol up+power. Then, from there, you use vol down to select recovery and then press vol up.
It never boots directly into the recovery unless you tell it to via an ADB command or from within a custom ROM that allows it.

Keep in mind, the stock recovery will override the custom recovery if you don't immediately boot back into recovery. Flash recovery, when that's done, press power to shutdown, and use the method Bolski described to boot into recovery.
Sent from my HTC6525LVW using Tapatalk

RikRong said:
Keep in mind, the stock recovery will override the custom recovery if you don't immediately boot back into recovery. Flash recovery, when that's done, press power to shutdown, and use the method Bolski described to boot into recovery.
Sent from my HTC6525LVW using Tapatalk
Click to expand...
Click to collapse
Let me see if i undestood.
You say that if you don't boot right into recovery, the stock one will overwrite CWM/TWRP. So i understand that, after very reboot you must reflash recovery if you want to use it again.
Or am I missing something?

Caliburno said:
Let me see if i undestood.
You say that if you don't boot right into recovery, the stock one will overwrite CWM/TWRP. So i understand that, after very reboot you must reflash recovery if you want to use it again.
Or am I missing something?
Click to expand...
Click to collapse
It won't reflash every time. You only need to boot straight into recovery the first time, so that the update binary completes. After the first time, you'll be good.
Sent from my HTC6525LVW using Tapatalk

RikRong said:
It won't reflash every time. You only need to boot straight into recovery the first time, so that the update binary completes. After the first time, you'll be good.
Sent from my HTC6525LVW using Tapatalk
Click to expand...
Click to collapse
I think this may be the problem I am having. I cant get my 926 to boot to recovery from fastboot after I load CWM recovery. Is there some trick?

stuck in loop, possibly a different kind of loop

I was trying to fix my girlfriends nexus 5 that was doing the restart loop after an update. Everything seemed to go fine. Unlocked the bootloader, etc. Flashed the newest rom (6.0.1 (MMB29S) ce1d670f61061c3902f3997510ea55d7 6bfcdfa4f4840898e5d76fa044f5e6a0f71343bf) and then something obviously went wrong (not quite sure, dont think i touched anything) and it's now stuck in a different kind of loop that only loops while it's plugged in. Ive uploaded a video to youtube, but since im a new user i cant actually link it properly yet. Hopefully this wont annoy any mods, I promise it's not spam. youtube . be / yNSoiTPnGZw
Is there any way to get it to stay on for more than a couple seconds to retry the flashing?
Any help is appreciated.

atomkrieg said:
I was trying to fix my girlfriends nexus 5 that was doing the restart loop after an update. Everything seemed to go fine. Unlocked the bootloader, etc. Flashed the newest rom (6.0.1 (MMB29S) ce1d670f61061c3902f3997510ea55d7 6bfcdfa4f4840898e5d76fa044f5e6a0f71343bf) and then something obviously went wrong (not quite sure, dont think i touched anything) and it's now stuck in a different kind of loop that only loops while it's plugged in. Ive uploaded a video to youtube, but since im a new user i cant actually link it properly yet. Hopefully this wont annoy any mods, I promise it's not spam. youtube . be / yNSoiTPnGZw
Is there any way to get it to stay on for more than a couple seconds to retry the flashing?
Any help is appreciated.
Click to expand...
Click to collapse
What was your flashing procedure, did u is a toolkit or do it manually, can u get it into bootloader or recovery? What files did u is for update and where did u get them?
Sent from my XT1526 using Tapatalk

soupysoup said:
What was your flashing procedure, did u is a toolkit or do it manually, can u get it into bootloader or recovery? What files did u is for update and where did u get them?
Sent from my XT1526 using Tapatalk
Click to expand...
Click to collapse
First i followed the guide here on xda to unlock the bootloader(guide-nexus-5-how-to-unlock-bootloader-t2507905), installed twrp, which went fine. Then i realized that i couldnt (or didnt realize how to via command line) to copy the stock rom and install it via twrp, so then i followed this guide here on xda (tutorial-how-to-flash-factory-image-t2513701) with the factory img (6.01 hammerhead), got to this point in the guide: ★After everything finished, select "Recovery" using the volume buttons. then it stalled out,turned off and now just cycles on and offf through the google logo with the lock picture or if i hold down the volume button it will go into the bootloader briefly then restart, rinse repeat.

atomkrieg said:
First i followed the guide here on xda to unlock the bootloader(guide-nexus-5-how-to-unlock-bootloader-t2507905), installed twrp, which went fine. Then i realized that i couldnt (or didnt realize how to via command line) to copy the stock rom and install it via twrp, so then i followed this guide here on xda (tutorial-how-to-flash-factory-image-t2513701) with the factory img (6.01 hammerhead), got to this point in the guide: ★After everything finished, select "Recovery" using the volume buttons. then it stalled out,turned off and now just cycles on and offf through the google logo with the lock picture or if i hold down the volume button it will go into the bootloader briefly then restart, rinse repeat.
Click to expand...
Click to collapse
Have u tried messing with the power button, there are a lot of issues on the nexus 5 with the power button causing loops, simply from getting stuck, try playing with the power button a little and see of that helps, it might just need to be replaced
Wait, did u flash the factory img with twrp, or did u flash it using fastboot?
Sent from my XT1526 using Tapatalk

soupysoup said:
Have u tried messing with the power button, there are a lot of issues on the nexus 5 with the power button causing loops, simply from getting stuck, try playing with the power button a little and see of that helps, it might just need to be replaced
Wait, did u flash the factory img with twrp, or did u flash it using fastboot?
Sent from my XT1526 using Tapatalk
Click to expand...
Click to collapse
in the end fastboot, since i coulndt see how i could copy the img over to install via twrp
im pretty sure the button is fine, since it was cycling from the ota update install, then was working fine unlocking the bootloader, but after the flash, it crapped the bed.

Different problem
I had a problem where the google logo keeps on booting up with a slight vibration.This started to happen when my was dropped.I initially thought that was a software issue and thought of installing new ROM's but eventually my device was not detected :crying:
So i took it to repair shop near my house and they said it would cost 2500
I did some google research and found the reason was due to the power button being stucked during the fall.I got that repaired and my device is good to go

siddhu007 said:
I had a problem where the google logo keeps on booting up with a slight vibration.This started to happen when my was dropped.I initially thought that was a software issue and thought of installing new ROM's but eventually my device was not detected :crying:
So i took it to repair shop near my house and they said it would cost 2500
I did some google research and found the reason was due to the power button being stucked during the fall.I got that repaired and my device is good to go
Click to expand...
Click to collapse
ok, took it into a shop, got the power button fixed. It must have been on the way out because literally one minute it worked and the second it didnt. now i think ive got it narrowed down. it's saying it's unable to mount /persist. ive tried the various fixes:
e2fsck/dev/block/platform/msm_sdcc.1/by-name/persist
and
make_ext4fs/dev/block/platform/msm_sdcc.1/by-name/persist
but all i get is a not found error. not sure what to do from here on.

success!! i ended up stumbling on a bit how to restore the persist partition i didnt try. got a custom rom installs and everything works. thanks to everyone who tried to help!!

stuck in bootloop while flashing cataclysm rom
i tried to flash cataclysm rom in my n5..i unlock bootloader, flash custom recovery using TWRP and flash cataclysm rom following the instructions in this thread http://forum.xda-developers.com/goo...s-5-how-to-unlock-bootloader-t2507905...after that it was stuck in bootloop...i tried to open recovery but it wont open anymore it will only go back to loop....how can open the recovery? is it safe to flash CWM recovery?..tnx in advance..

When it was stuck in the loop, I had to hold vol up and down with the power button (wait a few secs until it was completely off) then reboot holding down + power till it opened the bootloader. if that doesnt work, try reflashing the bootloader via fastboot. I only found out i couldnt mount the persist partition by looking at the terminal window in twrp after trying to install a rom which kept it in the boot loop. I then used the cmd: make_ext4fs /dev/block/platform/msm_sdcc.1/by-name/persist to rebuild it.

jpau11 said:
i tried to flash cataclysm rom in my n5..i unlock bootloader, flash custom recovery using TWRP and flash cataclysm rom following the instructions in this thread http://forum.xda-developers.com/goo...s-5-how-to-unlock-bootloader-t2507905...after that it was stuck in bootloop...i tried to open recovery but it wont open anymore it will only go back to loop....how can open the recovery? is it safe to flash CWM recovery?..tnx in advance..
Click to expand...
Click to collapse
After flashing TWRP, use the volume and power button to select recovery. Once in TWRP, wipe cache, data, reboot.

audit13 said:
After flashing TWRP, use the volume and power button to select recovery. Once in TWRP, wipe cache, data, reboot.
Click to expand...
Click to collapse
problems solved!!i flashed TWRP again and it it already to the recovery so i reflashed the cataclysm rom and it worked...my n5 is now working..tnx guys!

jpau11 said:
problems solved!!i flashed TWRP again and it it already to the recovery so i reflashed the cataclysm rom and it worked...my n5 is now working..tnx guys!
Click to expand...
Click to collapse
Great to hear it. Congratulations:good: