Related
Okay, so I posted about a week ago re: my softkey issue and fortunately that was fixed by returning my phone to stock, however, I followed nexushacks method and when it told to do this:
Step 12. Once you get the Android guy with exclamation mark, hit Volume Up and Power button at the same time until you get blue menus.
Nothing bloody happens. Please don't tell me I have to hold it for something like 60 seconds because I. Will. Rage. Lol.
When I try to go into recovery I get that symbol and can't do anything but batt pull. I'm still unlocked and rooted, to my knowledge.
I downloaded ROM Manager because I wanted to flash a recovery on it but it told me that "An error occurred while attempting to run privileged commands"
It also says this when I open Rom Manager "You must root your phone for ROM Manager to function. Superuser was not found at "/xbin/su" or "/system/xbin/su". Use google blabla"
I'm also in the process of trying a command prompt on windows but it keeps giving me the "waiting for device" or awaiting a responce from device" whatever that message is...
Trying to give as info as possible so someone can help a brother out.
I can't deal with this Stock OEM crap anymore *twitch*
Thanks!
Herp Derp
Okay, I didn't realize it was Press the Power button, then the volume up button.
Silly noobs.
So my question, is there a way to get Clockwork Recovery back on now or do I have to go through the whole "Rooting" process again?
I assume you see a lock symbol while booting. This means you're unlocked. Now you'll just need to use fastboot to flash a custom recovery (namely, CWM). NexusShacks details how to setup and use fastboot and i think they provide TWRP now, feel free to use this or just download CWM from here and flash that .img file instead.
After this, download the latest Superuser-3.0.7-efghi-signed.zip and flash that. Note that on a stock ROM it will flash stock recovery on every boot. To change this, rename /system/etc/install-recovery.sh to something else.
But how do I flash a .img file when I don't have Recovery mode?
Or can I use do that through the OEM Recovery (blue screen)?
You flash it with fastboot. Fastboot is a command line tool to flash various images through the bootloader screen. To enter the bootloader, turn off the device and hold Vol. Up + Power. This is the same place you would've typed "fastboot oem unlock", except to flash the new recovery you'll be typing something along the lines of "fastboot flash recovery recovery.img". NexusSHacks teaches you how to do all of this.
Ah sorry, I still get Fastboot and Bootloader mixed up.
Only problem is that I don't know if my computer is recognizing my device when I plug it in through Bootloader.
As mentioned in my original post
"I'm also in the process of trying a command prompt on windows but it keeps giving me the "waiting for device" or awaiting a response from device" whatever that message is..."
I'm at work now and trying to figure out how to do this using Terminal on my mac.
When I type in "cd /nexussrootICS" it keeps on telling me "no such file or directory"
Do I need to put this file in a specific folder? I got this step working on my PC at home but it told me "Waiting for device" the whole time.
Any thoughts?
I'm not particularly familiar with OS X so forgive anything i say that might be off target.
You need to direct the terminal to the relative OR absolute directory of that folder. A relative directory can be done by "cd ./blah", while an absolute will be done by "cd /blah". This is quite confusing for people who aren't used to command line, but very simple once you've done it a few times.
Easiest way aside from magical OS X shortcuts i don't know about is:
-Unzip the files to a "nexus" folder on the desktop, making sure the adb files are in this nexus folder and not a sub folder
-open terminal
-"cd /user/artist/desktop/nexus" or whatever the FULL PATH to the folder is. You should be able to see this through the folders properties or in the file explorer.
-Now you are in the folder, you can use adb and fastboot by just typing those words
I believe OS X can recognise the device straight away so you shouldn't need to install any drivers - at least my linux distros were like that. Installing drivers on Windows is detailed in the video, too.
Ah!!!! I feel like I'm so bloody close...
Okay that part worked perfectly, I found out how to at least direct Terminal to the right location but now I'm lost again...
It's giving me this
"
USER-iMac:nexus user$ ./fastboot-mac flash recovery-clockwork-5.0.2.0-crespo.img
unknown partition 'recovery-clockwork-5.0.2.0-crespo.img'
error: cannot determine image filename for 'recovery-clockwork-5.0.2.0-crespo.img'
USER-iMac:nexus user$
"
TheArtist8 said:
Ah!!!! I feel like I'm so bloody close...
Okay that part worked perfectly, I found out how to at least direct Terminal to the right location but now I'm lost again...
It's giving me this
"
USER-iMac:nexus user$ ./fastboot-mac flash recovery-clockwork-5.0.2.0-crespo.img
unknown partition 'recovery-clockwork-5.0.2.0-crespo.img'
error: cannot determine image filename for 'recovery-clockwork-5.0.2.0-crespo.img'
USER-iMac:nexus user$
"
Click to expand...
Click to collapse
The command should be
./fastboot-mac flash recovery recovery-clockwork-5.0.2.0-crespo.img
You were missing the recovery flag in the command.
Sent from my Nexus S 4G using Tapatalk 2
Also do "man fastboot-mac" in terminal to show all its options.
Sent from my Nexus S 4G using Tapatalk 2
Son of a... alright ill try after my lunch.
Sent from my Nexus S using XDA
Omfg I love you guys.
Thanks so much
I just got into Recovery mode, now on to Cyber-GR
Could someone please help me with this? I have posted a thread over on Android Forums with all the problems.
http://androidforums.com/asus-eee-p...restoring-device-big-problem-read-inside.html
Also, I have posted on here in the past about this, but I honestly am a giant noob at android and did not know what they were telling me to do.
Any help would be really great, thanks!
Since you can still boot your OS, you should be in good shape.
Try installing GooManager from the Play Store.
After installed, open it and grant root permissions.
Next, tap the menu key in the top right (3 stacked boxes) and then choose the Install OpenRecovery Script. This will install TWRP recovery which is far superior to any CWM I have ever run.
See if that installs properly (if yes, you will end up in TWRP recovery during a reboot)
TWRP allows you to see the internal and external memory to flash new ROMs.
frederuco said:
Since you can still boot your OS, you should be in good shape.
Try installing GooManager from the Play Store.
After installed, open it and grant root permissions.
Next, tap the menu key in the top right (3 stacked boxes) and then choose the Install OpenRecovery Script. This will install TWRP recovery which is far superior to any CWM I have ever run.
See if that installs properly (if yes, you will end up in TWRP recovery during a reboot)
TWRP allows you to see the internal and external memory to flash new ROMs.
Click to expand...
Click to collapse
I will try this out when I get home. Thank you. I will report back with what happens.
Edit: Also congratulations on 100 thanks.
format your micro SD and only put the ROM you want in it. Now install twrp as other guy said and reboot into twrp recovery in go to wipe and wipe (dalvik, cache, internal memory, system and everything else expect micro SD). Then do a clean installation of ROM and you should be good to go.. if that doesn't work then try easy flash
Sent from my Transformer using xda app-developers app
frederuco said:
Since you can still boot your OS, you should be in good shape.
Try installing GooManager from the Play Store.
After installed, open it and grant root permissions.
Next, tap the menu key in the top right (3 stacked boxes) and then choose the Install OpenRecovery Script. This will install TWRP recovery which is far superior to any CWM I have ever run.
See if that installs properly (if yes, you will end up in TWRP recovery during a reboot)
TWRP allows you to see the internal and external memory to flash new ROMs.
Click to expand...
Click to collapse
This did not work, I still boot into cwm when the device restarts after downloading it.
Here is another thing to try:
If you can boot and want to try TWRP, here is another way to install it so long as you are rooted:
Download the 2.3.2.3 blob from HERE
Place the recovery blob in the /sdcard/ directory. We are going to pretend the downloaded file is called TWRP.blob
Open a terminal window and enter these commands
Code:
su
cd /sdcard/
ls
dd if=TWRP.blob of=/dev/block/mmcblk0p4
reboot recovery
the ls will tell you if the blob is indead where it is supposed to be, if it can be seen, you should be good to go on to the dd command, if you don't see the file, do not procede.
Make sure to change TWRP.blob to the actual name and location of the file you downloaded
Let me know how it goes
frederuco said:
Here is another thing to try:
If you can boot and want to try TWRP, here is another way to install it so long as you are rooted:
Download the 2.3.2.3 blob from HERE
Place the recovery blob in the /sdcard/ directory. We are going to pretend the downloaded file is called TWRP.blob
Open a terminal window and enter these commands
Code:
su
cd /sdcard/
ls
dd if=/TWRP.blob of=/dev/block/mmcblk0p4
reboot recovery
the ls will tell you if the blob is indead where it is supposed to be, if it can be seen, you should be good to go on to the dd command, if you don't see the file, do not procede.
Make sure to change TWRP.blob to the actual name and location of the file you downloaded
Let me know how it goes
Click to expand...
Click to collapse
I cannot connect the device to my computer at all. I have usb debugging enabled and everything. It freezes for a couple of seconds when I plug the device in, and then says that installing the drivers has failed in windows. I am trying to run adb and it says no devices are connected.
BloodyRory said:
I cannot connect the device to my computer at all. I have usb debugging enabled and everything. It freezes for a couple of seconds when I plug the device in, and then says that installing the drivers has failed in windows. I am trying to run adb and it says no devices are connected.
Click to expand...
Click to collapse
You don't need to do this on your PC, so long as you can boot you can do it on your tablet.
frederuco said:
You don't need to do this on your PC, so long as you can boot you can do it on your tablet.
Click to expand...
Click to collapse
Ah, sorry, long time since I've done this. Alright, well I've gotten into terminal emulator and I've typed that exactly, switching over my directory to my microsd though and changing the file name to the exact one. I'm getting a "cannot open for read: No such file or directory" error when I do this. I have also tried moving the file to /sdcard/ and I have named the file twrp.blob, and neither of these have helped.
Did you issue the su command and get a popup for root access?
frederuco said:
Did you issue the su command and get a popup for root access?
Click to expand...
Click to collapse
Yes, that was the first thing I did. I did exactly as you said. I've tried changing file names, changing directories and everything but for some odd reason I'm getting the same error.
Edit: and yes, I'm changing those when I enter them in terminal as well.
Strange.
I'll have to troubleshoot this in a bit. I'll let you know what I find.
frederuco said:
Strange.
I'll have to troubleshoot this in a bit. I'll let you know what I find.
Click to expand...
Click to collapse
Thank you. Here is an image of what I have typed in case it is an error on my part.
http://i.imgur.com/lyJU8MR.jpg
Nope, error is on my part. Remove the "/" after the if=
It should be
dd if=TWRP.blob of=/dev/block/mmcblk0p4
Will update the other posts above.
frederuco said:
Nope, error is on my part. Remove the "/" after the if=
It should be
dd if=TWRP.blob of=/dev/block/mmcblk0p4
Will update the other posts above.
Click to expand...
Click to collapse
And it appears that I am still in clockworkmod when the device boots up.
BloodyRory said:
And it appears that I am still in clockworkmod when the device boots up.
Click to expand...
Click to collapse
Try a normal reboot at the end instead of reboot recovery and see if that works.
If not, run through this and download one of the flashable .zip files (it is version 2.2.X.X) and see if that works. If so, then run through GooManager to get the 2.3.2.3.
I got the device which is really nice, I rooted the first night, I then updated to version 1.1, lost root as usual but luckily my copy of CWM works fine for both versions 1.0 and 1.1.
If you are familiar doing this with android phones, just follow the same steps.
Use at own Risk
Download both files. Make sure they are complete and the file sizes match.
Save recovery.img to computer, and su.zip to VSD220,
Gain access to adb for your device,
go to terminal or command prompt and type "adb reboot bootloader",
and then enter.
The screen will turn solid black,
in the same terminal type "Fastboot flash recovery recovery.img",
and enter, make sure you are in the same directory as your recovery.img.
The recovery will flash quickly, when complete type "fastboot reboot", enter.
Your device will boot up,
make sure you have Su.zip saved on the VSD220 in the directory /mnt/external_sd/su.zip,
you must have an external sd card inserted,
you can confirm this with root explorer even without root.
In terminal type adb reboot recovery,
you should have a working CWM that will allow you to flash su.zip, and perform a nandroid backup, etc.
If CWM offers to block the stock recovery, accept it.
Otherwise you will need to delete or rename /install-recovery.sh and/or /system/recovery-from-boot.p.
Enjoy Root.
This works for both version 1.0 and 1.1.
Cool, thanks!
Can't seem to get "adb devices" to come up with anything. Using Android Composite ADB Interface for driver, no luck at all.
Any help on which ADB driver to use and where to download appreciated.
sk8tingusmc said:
I got the device which is really nice, I rooted the first night, I then updated to version 1.1, lost root as usual but luckily my copy of CWM works fine for both versions 1.0 and 1.1.
If you are familiar doing this with android phones, just follow the same steps.
Use at own Risk
Download both files. Make sure they are complete and the file sizes match.
Save recovery.img to computer, and su.zip to VSD220,
Gain access to adb for your device,
go to terminal or command prompt and type "adb reboot bootloader",
and then enter.
The screen will turn solid black,
in the same terminal type "Fastboot flash recovery recovery.img",
and enter, make sure you are in the same directory as your recovery.img.
The recovery will flash quickly, when complete type "fastboot reboot", enter.
Your device will boot up,
make sure you have Su.zip saved on the VSD220 in the directory /mnt/external_sd/su.zip,
you must have an external sd card inserted,
you can confirm this with root explorer even without root.
In terminal type adb reboot recovery,
you should have a working CWM that will allow you to flash su.zip, and perform a nandroid backup, etc.
If CWM offers to block the stock recovery, accept it.
Otherwise you will need to delete or rename /install-recovery.sh and/or /system/recovery-from-boot.p.
Enjoy Root.
This works for both version 1.0 and 1.1.
Click to expand...
Click to collapse
admisi said:
Can't seem to get "adb devices" to come up with anything. Using Android Composite ADB Interface for driver, no luck at all.
Any help on which ADB driver to use and where to download appreciated.
Click to expand...
Click to collapse
Sorry, was using outdated adb.
So got adb, flashed recovery.img, recovery flashed ok, rebooted...but now when I adb reboot recovery, it reboots and then stuck on green android with red triangle.
Any advice?
admisi said:
Sorry, was using outdated adb.
So got adb, flashed recovery.img, recovery flashed ok, rebooted...but now when I adb reboot recovery, it reboots and then stuck on green android with red triangle.
Any advice?
Click to expand...
Click to collapse
Ok, I worked it out now. But for others, the problem was that recovery image was being replaced with the original on the command "fasboot reboot".
So instead, immediately after typing "Fastboot flash recovery recovery.img" I typed the following command "fastboot boot recovery.img".....AND only then did I get CWM which allowed me to flash su.zip from SD card.
Thanks for all help. Now that I have root, what changes/tweaks did you make using root?
Is there an optimum dpi to apply and are you overclocking?
Thanks.
Here is a script to reboot recovery mode; from your Android VSD220.
sk8tingusmc said:
I got the device which is really nice, I rooted the first night, I then updated to version 1.1, lost root as usual but luckily my copy of CWM works fine for both versions 1.0 and 1.1.
If you are familiar doing this with android phones, just follow the same steps.
Use at own Risk
Download both files. Make sure they are complete and the file sizes match.
Save recovery.img to computer, and su.zip to VSD220,
Gain access to adb for your device,
go to terminal or command prompt and type "adb reboot bootloader",
and then enter.
The screen will turn solid black,
in the same terminal type "Fastboot flash recovery recovery.img",
and enter, make sure you are in the same directory as your recovery.img.
The recovery will flash quickly, when complete type "fastboot reboot", enter.
Your device will boot up,
make sure you have Su.zip saved on the VSD220 in the directory /mnt/external_sd/su.zip,
you must have an external sd card inserted,
you can confirm this with root explorer even without root.
In terminal type adb reboot recovery,
you should have a working CWM that will allow you to flash su.zip, and perform a nandroid backup, etc.
If CWM offers to block the stock recovery, accept it.
Otherwise you will need to delete or rename /install-recovery.sh and/or /system/recovery-from-boot.p.
Enjoy Root.
This works for both version 1.0 and 1.1.
Click to expand...
Click to collapse
Here is a script to reboot recovery mode; from your Android VSD220.
********* script starts here
#!/system/bin/sh
su
echo -n recovery | busybox dd of= /dev/block/emmc count=1 conv=sync; sync; reboot recovery
********* script ends here
I used Scripter Ver. 1.8 It work find. Don't forget to flash the right recovery.img and install su.zip. If you don't the script won't work.
has anyone gotten this to work lately? The device I'm playing with has 1.3 firmware on it. For some reason, I haven't gotten adb to work on this device in windows, and in ubuntu, I can adb reboot bootloader, and it goes to the black screen, but any fastboot commands, just sits there waiting for device. Any suggestions would be appreciated.
n1gh7m4r3 said:
has anyone gotten this to work lately? The device I'm playing with has 1.3 firmware on it. For some reason, I haven't gotten adb to work on this device in windows, and in ubuntu, I can adb reboot bootloader, and it goes to the black screen, but any fastboot commands, just sits there waiting for device. Any suggestions would be appreciated.
Click to expand...
Click to collapse
I didn't know 1.3 was available. Is this a recent firmware? I checked a couple weeks ago.
Not sure, it's not my monitor, just looking at it for a friend. when I go to about, system update I see vsd220 system update 1.3 device system version : IMM76D.UI23ED02_VSC and same info under server version
Got it sorted out after hunting on google. it does work
problem with adb
Ok so i got the device being recognized on my XP machine. Really did not have to do much. Just pluged it in and everything worked.
On my Windows 7 machine when i plug in the device i only see the MTP installed and then see VSD220 in MY COMPUTER and can browse the files. I do not see it when i "adb devices".
1) USB debugging is on/enabled
2) Both laptops have Eclipse with latest ADB and ADT tools installed
Any suggestions as to what i can do? Anyone can copy over drivers that are working with your win7 machine?
Confirmed Working for Acer DA220HQL (atleast for me)
Thanks to sk8tingusmc for posting the instructions. I followed them as well as the comments below and rewrote the instructions to reflect what worked for me on my Acer DA220HQL Smart Display. Which seems to be about the same device as the Viewsonic VSD220
Use at your own Risk - Acer DA220HQL
1. Download both files from the first Post (Thanks to sk8tingusmc).
Make sure they are complete and the file sizes match.2. Save "recovery.img" to your computer, and copy su.zip to the Acer DA220HQL to "/mnt/external_sd/su.zip"
3. Press Windows Key + R to open the Command Prompt or Start > Run > cmd > Enter
4. At the Command Prompt change to the Directory with adb.exe in my case "C:\Temp\sdk\platform-tools"
Download SDK from here: http://developer.android.com/sdk/index.html#download and extract in my case to C:\Temp (C:\Temp\sdk, C:\Temp\eclipse, and C:\Temp\SDK Manager.exe)5. At the Command Prompt type "adb reboot bootloader" and hit enter.
The screen will turn solid black6. At the Command Prompt Type "Fastboot flash recovery recovery.img" and hit enter.
Make sure you are in the same directory as your recovery.img.
The recovery will flash quickly
C:\Temp\sdk\platform-tools>Fastboot flash recovery recovery.img
sending 'recovery' (5688 KB)...
OKAY [ 0.176s]
writing 'recovery'...
OKAY [ 0.983s]
finished. total time: 1.163s
7. At the Command Prompt Type "fastboot boot recovery.img" and hit enter.
C:\Temp\sdk\platform-tools>fastboot boot recovery.img
downloading 'boot.img'...
OKAY [ 0.173s]
booting...
OKAY [ 0.001s]
finished. total time: 0.178s
Your device will boot up8. At the Command Prompt Type "adb reboot recovery"
It will enter ClockworkMod Recovery v6.0.2.8 with Touch Support. 9. Choose ZIP File from SDCard navigate to su.zip and select it by pressing on it.
Scroll all the way down to find ++++Go Back++++ on the SDCard if you entered the wrong Directory.
You may also choose to create a Nandroid Backup if you care to do so.10. Go Back and select Reboot
11. ROM may Flash stock recovery on boot. Fix? - Yes - Disable recovery Flash
Otherwise you will need to delete or rename /install-recovery.sh and/or /system/recovery-from-boot.p.
12. View attachment 2062751
Rom Version and work in Linux?
swiss420 said:
Thanks to sk8tingusmc for posting the instructions. I followed them as well as the comments below and rewrote the instructions to reflect what worked for me on my Acer DA220HQL Smart Display. Which seems to be about the same device as the Viewsonic VSD220
Click to expand...
Click to collapse
I was wondering what ROM Version is your DA220HQL on (ES I think?) and will the instructions work in Linux or other *nix like systems?
The main problem I have is that I do not have any drivers so adb in Windows XP will recognize it. It is recognized under Ubuntu 12.04 for me.
Thanks for the info! I am very excited to get this working better than out of the box!
LoveMyAndroid2010 said:
I was wondering what ROM Version is your DA220HQL on (ES I think?) and will the instructions work in Linux or other *nix like systems?
The main problem I have is that I do not have any drivers so adb in Windows XP will recognize it. It is recognized under Ubuntu 12.04 for me.
Thanks for the info! I am very excited to get this working better than out of the box!
Click to expand...
Click to collapse
There are a universal ADB Drivers for Windows.
Universal Naked Driver for example.
http://forum.xda-developers.com/showthread.php?t=1161769
Or the following link which I have no clue about who maintains this site and how secure it is running that Exe. So please check first for yourself before yelling at me. http://adbdriver.com/
Regarding the ROM Version I was on, check the other Thread where I listed them all.
swiss420 said:
There are a universal ADB Drivers for Windows.
Universal Naked Driver for example.
http://forum.xda-developers.com/showthread.php?t=1161769
Or the following link which I have no clue about who maintains this site and how secure it is running that Exe. So please check first for yourself before yelling at me. http://adbdriver.com/
Regarding the ROM Version I was on, check the other Thread where I listed them all.
Click to expand...
Click to collapse
Well I got the ADB driver installed and I can use it! However I tried the root procedure and it failed to root.
When I was in the CW, the one thing it kept giving an error such as cannot mount sdcard. I checked the sdcard and su.zip IS on it, but the recovery could not locate it. I did try using the sideload method and it seemed to work, but when I rebooted and checked for root, it was not successful.
I tried this in both Ubuntu and Windows with the same result. I even performed a factory reset and tried again. And the same thing: no root.
Is there a timing issue with when to enter the commands?
The info on my DA220HQL from about is as follows:
Model number
DA220HQL
Android version
4.0.4
Kernel version
3.0.21-00003-OMAP-Android+
[email protected] #1
SMP PREEMPT Mon May 13 10:06:22 CST 2013
Scaler version
BA0.2A en_PA
Touch driver version
1.1.0509.1
Build number
IMM76D.UI23ED22_ACE
Thanks for the help!
LoveMyAndroid2010 said:
Well I got the ADB driver installed and I can use it! However I tried the root procedure and it failed to root.
When I was in the CW, the one thing it kept giving an error such as cannot mount sdcard. I checked the sdcard and su.zip IS on it, but the recovery could not locate it. I did try using the sideload method and it seemed to work, but when I rebooted and checked for root, it was not successful.
I tried this in both Ubuntu and Windows with the same result. I even performed a factory reset and tried again. And the same thing: no root.
Is there a timing issue with when to enter the commands?
The info on my DA220HQL from about is as follows:
Model number
DA220HQL
Android version
4.0.4
Kernel version
3.0.21-00003-OMAP-Android+
[email protected] #1
SMP PREEMPT Mon May 13 10:06:22 CST 2013
Scaler version
BA0.2A en_PA
Touch driver version
1.1.0509.1
Build number
IMM76D.UI23ED22_ACEThanks for the help!
Click to expand...
Click to collapse
So you were able to load CW but when you select "Choose from SDCard" it could not find su.zip? Or did you try to Mount your SDCard? Regarding the ADB Commands you can take as much time as you want. Have you used CW before?
swiss420 said:
So you were able to load CW but when you select "Choose from SDCard" it could not find su.zip? Or did you try to Mount your SDCard? Regarding the ADB Commands you can take as much time as you want. Have you used CW before?
Click to expand...
Click to collapse
I did try to mount the sdcard, but I got an error that said it could not mount the sdcard. That is when I tried the sideload method. When I boot up normally, the sdcard is there along with su.zip. I posted the info on my DA220HQL noting the kernel version. I went back to the post where you stated your kernel version. They are different. Mine is later than yours.
After going through everything several times, I though maybe I was doing something wrong. We went out of town so this is the first time I could sit down and check out the posts.
Thanks for your help in advance.
Thanks for all the help. I could not get this to root so we are sending it back to HSN. As a last ditch effort, I did a factory reset and tried again. And I got the same result. I do not think that the recovery while booted was able to "see" the device's partition at all, which is why I got the mount errors. In any case, I also have found that we can find it online for much less than what HSN charged us for it. I am still curious if anyone else was able to root this little gem.
Keep posting updates!
im getting the same issue
cwm is not mounting my sdcard
android is recognizing it, but not in recovery
I'm thinking I shouldn't have installed that update
there are a bunch of errors in recovery when starting
E:Can't open /dev/block/platform/omap/omap_hsmmc.1/by-name/misc (No such file or directory)
E:Can't mount /cache/recovery/command
E:Can't open /dev/block/platform/omap/omap_hsmmc.1/by-name/misc (No such file or directory)
E:Can't mount /cache/recovery/log
E:Can't open /cache/recovery/log
E:Can't mount /cache/recovery/last_log
E:Can't open /cache/recovery/last_log
E:Can't open /dev/block/platform/omap/omap_hsmmc.1/by-name/misc (No such file or directory)
my best guess is we need a different recovery img, even though acer is the same as viewsonic
also there is no prompt to disable stock recovery being reinstalled
recovery touch is also kind of wack, have to tap below whatever I want to pick (which is also not consistent horizontally)
edit: going back to recovery, under mounts and storage, it doesn't appear to have permission to mount anything
looks like viewsonic released a rooted ROM on their support site
http://www.viewsoniceurope.com/uk/support/downloads/drivers/?prod_name=vsd220
But yeah...Acer hasnt
Perhaps this should get the ball rolling? It's funny how the US site doesn't have that
edit: wow looks like they even provided flashing tools and instructions...I just hope that this doesn't brick my unit (since its Acer not Viewsonic)...anyone else willing to give it a try?
Hello people,
First of all, I'm not an expert so pardon on that.
I had a MicroSD card in my tablet and it was partitioned using GParted, 2 partitons - fat32 and ext4. I erased the whole tablet with Wipe option in TWRP and installed move2sd.zip.
Anyway... When I pressed Reboot to recovery, tablet restared, showed TWRP and screen went on and off showing TWRP logo, like it was trying to load TWRP. Now... Since I installed that .zip file it might have written some code to use MicroSD card as boot? I reinstalled TWRP by flashing it via fastboot and was able to enter TWRP again.
Now the stupid part... Since it read 0mb on internal card (tablet), I wanted to fix it by formating Data... It didnt do the trick cause /data and other folders couldn't have been found. That's where I restarted the tablet and pressed Wipe data on the screen with 3 icons (RCK, Android, Wipe data)... Since then I only see 2 screens - bootup screen with Asus logo and message: Device is unlock and the next screen is TWRP and it flickers again, goes on and off just as if it was trying to load TWRP.
I cannot reflash recovery cause there is no fastboot?
I just hope this is not an expensive paper...
djakolis said:
Hello people,
First of all, I'm not an expert so pardon on that.
I had a MicroSD card in my tablet and it was partitioned using GParted, 2 partitons - fat32 and ext4. I erased the whole tablet with Wipe option in TWRP and installed move2sd.zip.
Anyway... When I pressed Reboot to recovery, tablet restared, showed TWRP and screen went on and off showing TWRP logo, like it was trying to load TWRP. Now... Since I installed that .zip file it might have written some code to use MicroSD card as boot? I reinstalled TWRP by flashing it via fastboot and was able to enter TWRP again.
Now the stupid part... Since it read 0mb on internal card (tablet), I wanted to fix it by formating Data... It didnt do the trick cause /data and other folders couldn't have been found. That's where I restarted the tablet and pressed Wipe data on the screen with 3 icons (RCK, Android, Wipe data)... Since then I only see 2 screens - bootup screen with Asus logo and message: Device is unlock and the next screen is TWRP and it flickers again, goes on and off just as if it was trying to load TWRP.
I cannot reflash recovery cause there is no fastboot?
I just hope this is not an expensive paper...
Click to expand...
Click to collapse
You can still enter RCK ??
Not that this helps your situation, so apologies.
Just started getting the screen flicker/lines randomly when handeling it. So my guess was just the loosining of something internally.
I`m also freecarding it. So that hadden`t crossed my mind.
Time for a tear down vid I guess.
Best of luck tho.
I'll make a quick video. Be right back to you...
Edit: I cannot post a video due to XDA rules, but you can search for it: TF700 no fastboot, recovery stuck (search for recent uploads, d jakolis is my username on YouTube) If you guys cannot find it, I can email the link to you.
As you can see in the video, there is not much left to do with the tablet.
However, when I selected Wipe Data on bootloader, did it wipe kernel too? I'm asking this cause I had installed data2sd.zip along with its corresponding kernel.
What would happen if someone else with the same device installed the custom ROM on MicroSD card and handed me his MicroSD card to pop in my tablet? Would it boot off it? Would I be able to enter Android and maybe somehow re-flash recovery and stock kernel along with stock ROM?
You should still be able to connect via adb. Try adb pull /tmp/recovery.log and adb logcat.
_that said:
You should still be able to connect via adb. Try adb pull /tmp/recovery.log and adb logcat.
Click to expand...
Click to collapse
Tried adb pull /tmp/recovery.log and got recovery.txt file.
Adb logcat showed this: /sbin/sh: exec: line 1: logcat: not found
djakolis said:
Tried adb pull /tmp/recovery.log and got recovery.txt file.
Adb logcat showed this: /sbin/sh: exec: line 1: logcat: not found
Click to expand...
Click to collapse
Looks like your /data partition is not formatted properly. Try this (don't type "#" and the following comment):
Code:
adb shell # connect to a shell on the device
killall -19 recovery # suspend the recovery so that it doesn't interfere with formatting
make_ext4fs /dev/block/mmcblk0p8 # format /data
dd if=/dev/zero of=/dev/block/mmcblk0p3 bs=64 count=1 # remove "wipe data" request
reboot
Wow... I don't know what to say. I'm looking at the fastboot screen! :highfive:
I didn't type the last line of your code because it rebooted itself after format data was complete - make_ext4fs... Is there any consequence for not typing the last line?
Alright, I'm in recovery right now. Question: What is installed on the tablet right now? If anything... May I proceed with installing stock ROM and maybe do nvflash process to have an unbrickable device?
P.S. What does it take to learn all these things? I'm curious cause I like coding, so if you feel happy to share it, I'm all ears.
djakolis said:
Wow... I don't know what to say. I'm looking at the fastboot screen! :highfive:
I didn't type the last line of your code because it rebooted itself after format data was complete - make_ext4fs... Is there any consequence for not typing the last line?
Click to expand...
Click to collapse
Maybe the "killall -19" stuff didn't work and the recovery was not suspended, so it may have somehow determined that the wipe was finished and initiated a reboot.
djakolis said:
Alright, I'm in recovery right now. Question: What is installed on the tablet right now? If anything... May I proceed with installing stock ROM and maybe do nvflash process to have an unbrickable device?
Click to expand...
Click to collapse
What is installed? Whatever recovery, kernel and ROM you installed last. No other apps since you just formatted /data.
Since the nvflash (flatline) process saves only BCT, bootloader, partition table and unlock token (basically all the stuff you need to get fastboot working on a hard bricked tablet), you can do that now.
djakolis said:
P.S. What does it take to learn all these things? I'm curious cause I like coding, so if you feel happy to share it, I'm all ears.
Click to expand...
Click to collapse
Lots of reading here, lots of googling and more reading. Experience with Linux on PCs helps too.
where can i wirte this codes i dont know , can anyone help me??? i have same problem
i can not connect device also in adb mode pc didnt accept the drivers
y3akup said:
i can not connect device also in adb mode pc didnt accept the drivers
Click to expand...
Click to collapse
If you can still enter recovery (which one do you have?) you can use the build in Terminal.
Otherwise you have to get the adb drivers installed and working. There is no other way if you do not have a working recover and cannot get into fastboot.
Try this tool: http://forum.xda-developers.com/showthread.php?t=2588979
Once you get the drivers installed boot the tablet to recovery and post what you get with this command:
Code:
adb devices
berndblb said:
If you can still enter recovery (which one do you have?) you can use the build in Terminal.
Otherwise you have to get the adb drivers installed and working. There is no other way if you do not have a working recover and cannot get into fastboot.
Try this tool: http://forum.xda-developers.com/showthread.php?t=2588979
Once you get the drivers installed boot the tablet to recovery and post what you get with this command:
Code:
adb devices
Click to expand...
Click to collapse
i tried this tool before but still in the device manager page i have transformer device with yellow flag
y3akup said:
i tried this tool before but still in the device manager page i have transformer device with yellow flag
Click to expand...
Click to collapse
You need to install the drivers - right click on the yellow ? and choose install drivers
Use these ones here:
http://www.androidfilehost.com/?fid=23329332407571009
http://www.androidfilehost.com/?fid=2332933240
now i have
0123456789ABCDEF recovery
but commands that from other posts didnt work
y3akup said:
now i have
0123456789ABCDEF recovery
but commands that from other posts didnt work
Click to expand...
Click to collapse
Try this command only:
Code:
dd if=/dev/zero of=/dev/block/mmcblk0p3 bs=64 count=1
Copy and paste it into your cmd window
sorry but it says dd is not inside or outsite command and bla bla i cant translate directly but like this
is not recognized as an internal or external command, operable program or batch file
berndblb said:
Try this command only:
Code:
dd if=/dev/zero of=/dev/block/mmcblk0p3 bs=64 count=1
Copy and paste it into your cmd window
Click to expand...
Click to collapse
now i could enter the recovery and nearly ten times i installed rom but still it couldnt open twrp and bootloader numbers i checked but i think i did something wrong what can i do now??
y3akup said:
now i could enter the recovery and nearly ten times i installed rom but still it couldnt open twrp and bootloader numbers i checked but i think i did something wrong what can i do now??
Click to expand...
Click to collapse
Splendid!
Now - did you a full wipe in TWRP before installing the rom? Select the Wipe option and swipe the button. Then re-install the rom.
On the last page of the Aroma installer you have the option of saving the installation log. Do it.
Then back to TWRP, go to Advanced and also save the recovery log.
If the ROM still doesn't boot, post both of those logs.
Also try to capture a logcat of the boot process
Code:
adb logcat -v long > logcat.txt
Post that one too.
Hi All.
Hopefully someone is able to help me. I'll try to give as much information as I can.
I have followed the following guide to root my nexus 5.
I have rooted it successfully last month.
However, I have accidentally installed a OTA update from google this week (Android 4.4.3).
Just a while earlier, I have decided to flash a custom rom.
So, as usual, I reboot my phone into recovery.
However, the recovery shows the android with a red triangle, stating "no command".
I have read the forums and read that this is actually not an error but it is the default recovery for android. (Edit: Ok. Maybe its not the default recovery. Anyone able to give me advice on this?)
I guess that my recovery was returned to the stock recovery after the OTA update.
So I tried to flash CWM recovery using ROM manager, but it states "An error occured while flashing your recovery".
I decided to restart my phone and to try it again, now it stucks at 100% on ROM Manager.
I have also tried to flash recovery.img using fastboot. However, it didn't work too.
It returns with an error: "cannot open recovery.img"
May I know if anyone can help me with this problem?
More info on the current status of my phone:
Bootloader unlocked. (Checked by trying to unlock it again. System states that process has failed as it is already unlocked)
ADB Device: Detect-able.
Fastboot Device: Detect-able.
It is indeed the stock recovery. OTA returned it. It also removed root so rom manager won't work, but you shouldn't use rom manager anyway.
You'll need to download a recovery and flash it using fastboot .
Please describe the exact steps you took to get the fastboot error. Screenshot of cmd would be very helpful too please
Sent from my Nexus 5 using Tapatalk
rootSU said:
It is indeed the stock recovery. OTA returned it. It also removed root so rom manager won't work, but you shouldn't use rom manager anyway.
You'll need to download a recovery and flash it using fastboot .
Please describe the exact steps you took to get the fastboot error.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
What I did is to check if the boot loader is unlocked.
And yes. It is unlocked.
So I carried onto checking if fastboot detects my devices by doing "fastboot devices". And my nexus5 gets detected.
Then I moved on to trying to flash recovery using " fastboot flash recovery recovery.img ".
But the error appears at this point. And I'm stuck.
Is this sufficient?
Do note that I did change the file name to recovery and not recovery.img as most files do not include the file type in the file name.
Try flashing the recovery using dd (You need root)
Boot the phone normally and push the recovery.img using adb and flash it:
Code:
adb push *Path to recovery.img* /data/media/0/
adb shell
# dd if=/data/media/0/recovery.img of=/dev/block/platform/msm_sdcc.1/by-name/recovery
I hope this helps.
You would be better served setting windows not to hide known file types to be honest.
A screenshot of your fastboot flash attempt and error would be most useful please
Sent from my Nexus 5 using Tapatalk
---------- Post added at 05:40 PM ---------- Previous post was at 05:28 PM ----------
chblg said:
Try flashing the recovery using dd (You need root)
Boot the phone normally and push the recovery.img using adb and flash it:
Code:
adb push *Path to recovery.img* /data/media/0/
adb shell
# dd if=/data/media/0/recovery.img of=/dev/block/platform/msm_sdcc.1/by-name/recovery
I hope this helps.
Click to expand...
Click to collapse
He hasn't got root. Fastboot is his only option
Sent from my Nexus 5 using Tapatalk
Well FWIW for anyone else reading, my assumption was going to be that the OP didn't put the full path to the recovery OR didn't put the recovery in the location the cmd prompt was running from.
Would have been nice to have seen this through to conclusion, but I cannot monitor forever so I'm unsubscribing due to lack of replies.
eg:
Code:
c:\Users\Administrator>fastboot flash recovery recovery.img
If there is no path to recovery image as above, then the asumption to cmd is that the recover image is in c:\users\administrator (Which it probably isnt)
If it is on the administrators desktop you would:
Code:
c:\Users\Administrator>fastboot flash recovery c:\users\Administrator\Desktop\recovery.img
Nukyi said:
Hi All.
Hopefully someone is able to help me. I'll try to give as much information as I can.
I have followed the following guide to root my nexus 5.
I have rooted it successfully last month.
However, I have accidentally installed a OTA update from google this week (Android 4.4.3).
Just a while earlier, I have decided to flash a custom rom.
So, as usual, I reboot my phone into recovery.
However, the recovery shows the android with a red triangle, stating "no command".
I have read the forums and read that this is actually not an error but it is the default recovery for android. (Edit: Ok. Maybe its not the default recovery. Anyone able to give me advice on this?)
I guess that my recovery was returned to the stock recovery after the OTA update.
So I tried to flash CWM recovery using ROM manager, but it states "An error occured while flashing your recovery".
I decided to restart my phone and to try it again, now it stucks at 100% on ROM Manager.
I have also tried to flash recovery.img using fastboot. However, it didn't work too.
It returns with an error: "cannot open recovery.img"
May I know if anyone can help me with this problem?
More info on the current status of my phone:
Bootloader unlocked. (Checked by trying to unlock it again. System states that process has failed as it is already unlocked)
ADB Device: Detect-able.
Fastboot Device: Detect-able.
Click to expand...
Click to collapse
rootSU said:
Well FWIW for anyone else reading, my assumption was going to be that the OP didn't put the full path to the recovery OR didn't put the recovery in the location the cmd prompt was running from.
Would have been nice to have seen this through to conclusion, but I cannot monitor forever so I'm unsubscribing due to lack of replies.
eg:
Code:
c:\Users\Administrator>fastboot flash recovery recovery.img
If there is no path to recovery image as above, then the asumption to cmd is that the recover image is in c:\users\administrator (Which it probably isnt)
If it is on the administrators desktop you would:
Code:
c:\Users\Administrator>fastboot flash recovery c:\users\Administrator\Desktop\recovery.img
Click to expand...
Click to collapse
Hi. Sorry for late reply. Was at work. I'll try out the full path. What I was told is to just put the recovery IMG into the same folder as fastboot and it should do the trick. Will post screenshots after trying out.
Nukyi said:
Hi. Sorry for late reply. Was at work. I'll try out the full path. What I was told is to just put the recovery IMG into the same folder as fastboot and it should do the trick. Will post screenshots after trying out.
Click to expand...
Click to collapse
Hi All,
Here's the screenshot of my cmd.
Please kindly assist and advise on what should I do.
Thank you.
Nukyi said:
Hi All,
Here's the screenshot of my cmd.
Please kindly assist and advise on what should I do.
Thank you.
Click to expand...
Click to collapse
Ok thanks.
Did you turn off "Hide known file types"? can you screenshot in Windows explorer, the location of the recovery image with hide turned off and in "details" view please?
rootSU said:
Ok thanks.
Did you turn off "Hide known file types"? can you screenshot in Windows explorer, the location of the recovery image with hide turned off and in "details" view please?
Click to expand...
Click to collapse
Yes. I did. Here are the images.
I'm using windows8. So it may look a little different.
Nukyi said:
Yes. I did. Here are the images.
I'm using windows8. So it may look a little different.
Click to expand...
Click to collapse
If I gave you a few steps to try and rule out some variables to narrow down the fault are you happy to do them?
My first thing to suggest would be to take a copy of the "platform-tools" folder and drop it on the root of c: (meaning ensure c:\platform-tools exists)
Then right click Computer > Properties > Advanced System Settings (A System Properties pop up will be shown, in the advanced tab)
In the pop-up, press "Environment Variables" and in the bottom window, called "System variables" scroll down to the entry called "Path" and press edit.
Scroll to the very end of the line of text. Add the following to the end of the line with no spaces (and no quotes obviously)
";c:\platform-tools" and click OK to all windows and pop-ups. Just to break that down, it is a semi colon ; followed by the path to the platform-tools folder.
Give yourself a restart.
What this does, is gives you the ability to call the fastboot command from anywhere. So instead of typing Desktop\adt-bundle......\platform-tools\fastboot flash blah blah, you can literally just type "fastboot flash" because like other commands, it is now a system variable.
Then put the recovery.img in the directory that cmd opens up to which appears to be be "c:\users\blah"
Then open cmd and do the basic command with no paths.... fastboot flash recovery recovery.img
Let me know,
Thanks
rootSU said:
If I gave you a few steps to try and rule out some variables to narrow down the fault are you happy to do them?
My first thing to suggest would be to take a copy of the "platform-tools" folder and drop it on the root of c: (meaning ensure c:\platform-tools exists)
Then right click Computer > Properties > Advanced System Settings (A System Properties pop up will be shown, in the advanced tab)
In the pop-up, press "Environment Variables" and in the bottom window, called "System variables" scroll down to the entry called "Path" and press edit.
Scroll to the very end of the line of text. Add the following to the end of the line with no spaces (and no quotes obviously)
";c:\platform-tools" and click OK to all windows and pop-ups. Just to break that down, it is a semi colon ; followed by the path to the platform-tools folder.
Give yourself a restart.
What this does, is gives you the ability to call the fastboot command from anywhere. So instead of typing Desktop\adt-bundle......\platform-tools\fastboot flash blah blah, you can literally just type "fastboot flash" because like other commands, it is now a system variable.
Then put the recovery.img in the directory that cmd opens up to which appears to be be "c:\users\blah"
Then open cmd and do the basic command with no paths.... fastboot flash recovery recovery.img
Let me know,
Thanks
Click to expand...
Click to collapse
Alright. I'll do it and get back to you shortly.
Thank you.
Really hope this fixes the problem.
rootSU said:
If I gave you a few steps to try and rule out some variables to narrow down the fault are you happy to do them?
My first thing to suggest would be to take a copy of the "platform-tools" folder and drop it on the root of c: (meaning ensure c:\platform-tools exists)
Then right click Computer > Properties > Advanced System Settings (A System Properties pop up will be shown, in the advanced tab)
In the pop-up, press "Environment Variables" and in the bottom window, called "System variables" scroll down to the entry called "Path" and press edit.
Scroll to the very end of the line of text. Add the following to the end of the line with no spaces (and no quotes obviously)
";c:\platform-tools" and click OK to all windows and pop-ups. Just to break that down, it is a semi colon ; followed by the path to the platform-tools folder.
Give yourself a restart.
What this does, is gives you the ability to call the fastboot command from anywhere. So instead of typing Desktop\adt-bundle......\platform-tools\fastboot flash blah blah, you can literally just type "fastboot flash" because like other commands, it is now a system variable.
Then put the recovery.img in the directory that cmd opens up to which appears to be be "c:\users\blah"
Then open cmd and do the basic command with no paths.... fastboot flash recovery recovery.img
Let me know,
Thanks
Click to expand...
Click to collapse
I have tried it. Still doesn't work. (Screenshot as attachment)
Could there be a problem with the phone instead of with the path/common errors?
Did you check if the MD5 of the recovery file is correct? (to rule out a bad download)
jj14 said:
Did you check if the MD5 of the recovery file is correct? (to rule out a bad download)
Click to expand...
Click to collapse
Re-downloaded it many times. Checked all of the md5.
Downloaded not only CWM recovery. But also other custom recovery.
Nukyi said:
I have tried it. Still doesn't work. (Screenshot as attachment)
Could there be a problem with the phone instead of with the path/common errors?
Click to expand...
Click to collapse
Now try and run cmd as an administrator if you are not doing
Nukyi said:
I have tried it. Still doesn't work. (Screenshot as attachment)
Could there be a problem with the phone instead of with the path/common errors?
Click to expand...
Click to collapse
no. the recovery.img is not in c:\users\username\
put that file there, then retry your command
OR
fastboot flash recovery c:\entire\path\to\recovery.img
Nukyi said:
Re-downloaded it many times. Checked all of the md5.
Downloaded not only CWM recovery. But also other custom recovery.
Click to expand...
Click to collapse
are you sure you downloaded the image and not the zip??
samersh72 said:
are you sure you downloaded the image and not the zip??
Click to expand...
Click to collapse
Pretty sure it is the image. Downloaded from the website itself. They only comes in .img and not in zip.
Nukyi said:
Pretty sure it is the image. Downloaded from the website itself. They only comes in .img and not in zip.
Click to expand...
Click to collapse
Ah. It just worked suddenly. No idea why. But I guess @rootSU 's suggestion works well.
And maybe also @Zepius 's suggestion.
Here's what I did to help others who have the same problem.
I did what rootSU asked me to do (changing the "path" part).
Then took Zepius suggestion and duplicated the recovery img in a few folders (the original folder i'm using, on desktop, on C drive root folder)