Hi I am new here and not sure if I am on the right forum
Anyway My Lenovo A850 would not boot up so I used volume+ and plugged in the usb cable finally got preloader to get installed
I flashed a new rom with sptools the phone booted up normal BUT
I could not use usb storage and pc would still not recognise my phone I an installed TWRP and found I did a backup of my previous ROM flashed it with TWRP now it will not boot up AT ALL STUCK on LENOVO LOGO preloader is gone though I can get TWRP still and brwse my sd card CAN ANYONE HELP???????????????????????
Related
I'm using a lenovo s820, rooted, running stock rom and jb 4.2.1
I couldn't find any recovery like cwm or twrp for my phone and I ended up downloading a recovery that said it was a version of cwm for my phone from this app called mobileuncle mtk tools
The app flashed the recovery onto my phone and rebooted into recovery except that it didn't boot into recovery
Now it is stuck in a boot loop where it only shows the lenovo logo but does not boot
I've tried booting into recovery by holding "vol up+vol down+power" but it does the same thing
I tried booting into factory mode but it is in chinese and I cannot understand anything in it
I have a backup of my rom before flashing the recovery but it is stuck in the boot loop even after restoring the backup
I've also searched a lot and can't find a solution to my problem!
I've seen some solutions saying I should flash stock rom using flash tools but there's a big problem here. Flash Tools refuses to flash the stock rom onto my phone. I tried to do it while keeping the phone in meta mode but it wasn't happening.
I've attached the image of the factory mode menu
Please help asap! I can't use my phone at all and I'm panicking and I don't know what to do!!! :crying: :crying: :crying:
Update: I managed to restore clockworkmod recovery on my phone and I tried to restore the stock os from it but it says installation aborted and refuses to install the os :/
Look here:
http://forum.xda-developers.com/showthread.php?t=2576898
My Lenovo A3500 is no turning on after flashing the stock rom via sp flashtools, it didn't flash completely, it failed before downloading. I accidentally closed the error box (which tells me where the log file is).
So before this happened, I successfully flashed the stock rom for my tablet, then I decided to flash cwm recovery (I found a compatible version), Then I tried flashing the cwm recovery via spflashtool but it tells me that "PMT changed for the rom. It must be downloaded". So I decided to reinstall the stock rom with the CWM recovery. So I selected the scatter file for the stock rom and I just changed the path of the recovery to the CWM recovery, when I clicked download and connected my powered off device, It showed an error that it cant be completed (I forgot what it is, it told me there's a log file) Now my tablet doesnt start after pressing the power button, cant access anything on the tablet but when I connect it to my computer, my computer plays the sound that it found a device so that means my tablet is detected. I tried adb devices but it shows nothing. I tried flashing the stock rom again via sp flashtool but when I click download and plug in the phone the download is not starting meaning it cant detect my tablet.
So for short:
my lenovo a3500 tablet doesnt turn on after flashing stock rom, it is detected by pc (plays sound) but cant be detected by adb. It cant be detected by sp flashtool.
please help, youre my last hope pls m8s
XDA Visitor said:
My Lenovo A3500 is no turning on after flashing the stock rom via sp flashtools, it didn't flash completely, it failed before downloading. I accidentally closed the error box (which tells me where the log file is).
So before this happened, I successfully flashed the stock rom for my tablet, then I decided to flash cwm recovery (I found a compatible version), Then I tried flashing the cwm recovery via spflashtool but it tells me that "PMT changed for the rom. It must be downloaded". So I decided to reinstall the stock rom with the CWM recovery. So I selected the scatter file for the stock rom and I just changed the path of the recovery to the CWM recovery, when I clicked download and connected my powered off device, It showed an error that it cant be completed (I forgot what it is, it told me there's a log file) Now my tablet doesnt start after pressing the power button, cant access anything on the tablet but when I connect it to my computer, my computer plays the sound that it found a device so that means my tablet is detected. I tried adb devices but it shows nothing. I tried flashing the stock rom again via sp flashtool but when I click download and plug in the phone the download is not starting meaning it cant detect my tablet.
So for short:
my lenovo a3500 tablet doesnt turn on after flashing stock rom, it is detected by pc (plays sound) but cant be detected by adb. It cant be detected by sp flashtool.
please help, youre my last hope pls m8s
Click to expand...
Click to collapse
Welcome to XDA Developers.
First, please register as a user, here > http://forum.xda-developers.com/register.php
After you have registered, I would suggest that you post your question in the following forum and one of our experts will help you > http://forum.xda-developers.com/showthread.php?t=2259645
Good luck
My samsung core gt i8262 stuck after custom rom installation at revoery mod
Hi,
I installed Kitcat4 before installing i flashed my device using CWM recovery....after successful installation of Rom wen I reboot my device doesnt turns ON instead it goes to CWM recovery Mode...i thought to flash with TWRP but now my Device is not recognized by my PC and ODIN too...im stuck at recovery mode...please help...!
Hamed ali said:
Hi,
I installed Kitcat4 before installing i flashed my device using CWM recovery....after successful installation of Rom wen I reboot my device doesnt turns ON instead it goes to CWM recovery Mode...i thought to flash with TWRP but now my Device is not recognized by my PC and ODIN too...im stuck at recovery mode...please help...!
Click to expand...
Click to collapse
Happened to me too, you probably need to install the stock samsung galaxy core duos android. Search for it in xda or google. Worked for me
Solved
The problem is solved now...just flashed with TWRP....and connected cable to other USB port then windows installed drivers automatically and ODIN recognised my device...just a small issue it was..now this OS is working fine..!
My Lenovo A316i does not turn on anymore but can still be recognized by the computer. At first, my phone can be powered on but restarts at the logo. I made it worked using SP Flash Tool and I installed TWRP. The problem occured after I install an updated.zip folder through TWRP without Wiping. The phone at this stage was stocked at the logo. Then I tried the "Format all & Download" option in the SP Flash Tool. Now it does not turn on, but can still be recognized by the computer.
I already followed the steps from these videos
https://www.youtube.com/watch?v=A3TmXtOA0IA
https://www.youtube.com/watch?v=hKYH7gkvrvY
Try to flash with stock rom dude
I already did but it's still not working.
Are u able to go to TWRP recovery mode
No because it's not turning on anymore.
Try to use button combination for your phone model
Hello,
My device is Lenovo Z90a40/Vibe Shot
My problem is when trying to install mokee from twrp
so first i delete data,dalvik cache etc. and somehow my phone shutted down
now im stuck at twrp and cant flash anything
tried to use QFil, says port 9006
and tried to flash rom from SD card, phone doesnt even detected it :crying:
so i can access twrp but i have no rom inside my int. storage
help please?
sorry if you dont understand