MIUI 7 [v7.1/7.2] 64bit for yuphoria - YU Yuphoria

I am not responsible for anything that may happen to your phone as a result of installing custom roms and/or kernels. you do so at your own risk and take the responsibility upon yourself
(But I am 100% sure it will work if you use my given steps)
Instructions:-
-Boot into TWRP Recovery (First take backup &then flash rom)
-Wipe Cache, Dalvik Cache, Data and System
-Flash MIUI_V7 ZIP
-Reboot to system
-no need to flash gapps
Bugs:-
-Audio [Fix Available]
https://drive.google.com/file/d/0B0_D6pTaEqhCQlBEZm5jdy1JeGc/view?usp=docslist_api
Audio Bug Flash Instructions :-
Flash Instruction
Download zip....
Reboot into any Custom Recovery....
Wipe Cache & Dalvik/ART Cache....
Flash zip....
Wipe data (not necessary)....
Reboot and Enjoy !!!!
Downloads:-
MOD EDIT: links removed, shared without permission
(Changes :- 1)old navigation keys replaced by lolipop nav keys
2)increased smoothness and touch sensitivity
3)added hpsa/wifispeed tweak and many more
Screenshots
- http://imgur.com/ePVudnK
- http://imgur.com/e1oigqi
- http://imgur.com/BpCWtrG

This rom is ported by me and you shared my rom without my permission :/ :crying:
please visit below link i already posted in XDA
http://forum.xda-developers.com/yu-yuphoria/development/wip-miui-7-1-yuphoria-t3345301

Please Delete This thread as it is fraud..He posted Divyansh747's ROM..

Thread closed for above reasons.

Related

[ROM] Walton Primo G1 [4.1.2]

JellyBean 4.1.2 Rom for Walton Primo G1
Flashing this rom may void your warranty. I'm not responsible for any kind of damage.
Features:
1# Full vanilla experience, no bloatware
2# Superfast
3# Prerooted
4# Excellent sound
5# 34% more brighter than the stock firmware
6# MTK Mobile Uncle pre-installed
Prerequisites:
1# CWM Recovery (You can follow this thread for rooting and cwm)
2# It's better to have 4.1.1 firmware before installing. Because if you try to flash
it from 4.0.4, you may face some problems
Installation:
1# Boot into cwm. For doing so, turn the phone off. Then turn on the phone by pressing Power Button + Volume Up
2# Make a cwm backup before proceeding
3# Wipe data/factory rest
4# Wipe cache partition
5# Go to Mounts and Storage
6# Format /cache, /data, /system
7#Go to advanced and Wipe dalvik Cache
8# Install zip from sdcard
9# It will now automatically reboot
Please wait 10 minutes because first boot can take upto 10 minutes. If it doesn't boot after 10 minutes then follow bellow procedures
10# If it is stuck on the x logo, then remove the battery
11# Now attach it again and boot into cwm.
12# Now flash the patch attached
14# Now wipe/factory rest
15# wipe dalvik cache
16# Reboot and enjoy
Download Links:
http://www1.datafilehost.com/d/715e21f2
http://www1.datafilehost.com/d/e02f9ef2
http://www1.datafilehost.com/d/23c62a73
http://www1.datafilehost.com/d/015fc494
Special thanks to:
thebdcoder
mehediatcom
sifat3d
Reserved
Reserved for screenshots, issues and changelog
Reserved

[rom] spidered lenovo s920 4gb

INSTALL THIS ROM JUST FOR BASE ROW. MT6589
(NOT WORK WITH CHINESE BASE ROM)​
INSTRUCTIONS INSTALL ROM
1. PLACE FILE TO SDCARD
2. GO TO CUSTOM RECOVERY (CWM/ TWRP)
3. WIPE DATA, CACHE, DALVIK, SYSTEM)
4. INSTALL ROM
5. WIPE DALVIK
6. REBOOT
FEATURE
FULL THEME
REAL AOSP
SWITCH 3G
SIGNED ALL APK
LANGUAGE (JUST ENGLISH)
ZERO TWEAK
PREINSTALL
TITANIUM BACKUP PRO
LINK2SD PLUS.​
DOWNLOAD ROM​
ASK TO ME IF YOU HAVE PROBLEM : http://www.facebook.com/zaizado​

[ROM] [AOKP] [4.4.4] - Galaxy ACE 3 LTE [UNOFFICIAL]

Galaxy ACE 3 LTE users, I represent you AOKP custom AOSP based ROM!
Everything is like CM11 from this thread i suppose : http://forum.xda-developers.com/showthread.php?t=2800259
You will need CWM from the CM11 thread in order to install!!!
GAPPS: http://forum.xda-developers.com/showthread.php?t=2608800
Download: https://mega.co.nz/#!Jk1XjJ5Q!4si-OqvZ3CYgRedBV91ieJcehJ-Tx6FO44ggQQMh8NE
INSTALLATION
1.Reboot into recovery
2.Wipe data factory reset
3.Format system
4.Flash Rom
5.Flash Gapps
6.Reboot
ENABLE ART(Need fresh install)
1. Reboot into recovery mode
2. Wipe data, cache and dalvik cache
3. Format /system partition
4. Flash cm11
5. Reboot
6. Enable ART
7. Reboot into Recovery
8. Flash Gapps
9. Reboot
This is for GT-S7275R
Attention: It is harder for me to support AOKP rather than CM so do not ask for updates, I' ll do everything i can
Don't forget to press "Thanks"!!!
PS: I am not responsible for any damage to your device
kostoulhs said:
Galaxy ACE 3 LTE users, I represent you AOKP custom AOSP based ROM!
Everything is like CM11 from this thread i suppose : http://forum.xda-developers.com/showthread.php?t=2800259
You will need CWM from the CM11 thread in order to install!!!
GAPPS: http://forum.xda-developers.com/showthread.php?t=2608800
Download: https://mega.co.nz/#!Jk1XjJ5Q!4si-OqvZ3CYgRedBV91ieJcehJ-Tx6FO44ggQQMh8NE
INSTALLATION
1.Reboot into recovery
2.Wipe data factory reset
3.Format system
4.Flash Rom
5.Flash Gapps
6.Reboot
ENABLE ART(Need fresh install)
1. Reboot into recovery mode
2. Wipe data, cache and dalvik cache
3. Format /system partition
4. Flash cm11
5. Reboot
6. Enable ART
7. Reboot into Recovery
8. Flash Gapps
9. Reboot
This is for GT-S7275R
Attention: It is harder to support AOKP rather than CM so do not ask for updates, I' ll do everything i can
Don't forget to press "Thanks"!!!
PS: I am not responsible for any damage to your device
Click to expand...
Click to collapse
Bugs?
Arcanister99 said:
Bugs?
Click to expand...
Click to collapse
I haven't tested it a lot yet, i think that everything is like in CM11
Didn't find anything major
For personal reasons the OP is not able to support this project.

[myphone agua rio s5501] [ported] s4 rom

ROM LINK:
Mediafire
Google Apps: ( Playstore, Google Service etc.):
Patch
FEATURES:
-Air Gesture
-Already Swapped
-Build.Prop Tweaks
Instruction
Back-Up your current rom
Full Wipe (Wipe Data/Factory, Wipe Cache Partition, Wipe Dalvik Cache)
Go to Mount and Storage then Format /System
Flash This Rom thru CWM/TWRP ( Try to use CWM 6.0.4.4 or 6.0.3.3 )
Reboot!
Enjoy! )
NOTE: When Flashing ROM, be sure to select YES - FIX ROOT then continue to flash the patch.
Screenshots
ASK lang!
Oiiii anu pa iba detail? gusto ko idownload! pre-rooted? zipaligned? dual sim ba magamit?busybox? reply pls

CARBON ROM for Micromax unite 3

Hello guys I am back within another custom ROM for Micromax unite 3:laugh: ...........
WARNING: I will not be responsible if something goes wrong while flashing this custom ROM...... so do this with your own risk
MAIN FEATURES OF CARBON ROM:-
#Android 5.1.1
#brand new design
#lightweight ROM. (as compared to stock ROM)
#awesome themes
# many custom features
# highly customisable ROM
# advanced reboot
# CM theme engine
# audio FX sound manager
Steps :–
1. Download all the necessary files. [ ROM package, G apps, and patch fixes]
2. Download and flash a custom recovery like TWRP. [Skip this step if u already have a custom recovery]
3. Boot into recovery mode and perform a full wipe of your device [cache, dalvik, system, data, .....everything SD card]
4. Now after wiping the whole data, flash zip files in the following order:
1st: carbon.zip (ROM file). [ link in below]
2nd: 3g fix.zip ( for fixing 3G bug). [ link in below]
3rd: gapps
----------------------------------------------------------------------
Step5: don't forget to wipe cache after flashing all these files....this should prevent any bootloops or any other issues?
LINKS::::::::::::
CARBON.ZIP (ROM) : https://drive.google.com/uc?id=0B0HpmroY8T2gNjE5Q1hFUzNudFE&export=download
3g fix.zip ( bug fix) : https://drive.google.com/file/d/0B1F8gPzhGG0oZlBhSXYtYS1yRG8/view
Gapps :
https://drive.google.com/file/d/0B8FHkOoYgvw-M1RLbFZoYkpLQjQ/view?pref=2&pli=1
©°° ... first boot may take up to 10 to 20 minutes so be patient.... sit back and relax
Special Thanks To :-
Devolper of carbon rom who made it.
Spark roms where it is ported.
Sumit for porting to U3.
A simple thx is really appreciated
— and don't forget to press ? button
7 and boot loop
I have done wipe option when I was flashing file and it shows (failed error 7 and I hit reboot and when it started reboot it's just got stuck in boot loop home screen is not opening
Help
---------- Post added at 11:06 PM ---------- Previous post was at 10:59 PM ----------
I have done wipe cache and dalvik cache and when I started to flash it show error 7 and I hit reboot and now it gotten stuck at boot loop and home screen is not opening just stuck at brand name. Help
no sim detected

Categories

Resources