Database Info

[ROM][CM11][17 NOV] Codename Lungo

Overview
Codename Lungo is a customized, aftermarket firmware distribution for several Android devices. Based on CyanogenMod, Codename Lungo is designed to increase battery life and size over Android-based ROMs released by vendors and carriers.
Features
Great Base
Lightweight & Fast
No Bloatware!
Longer Battery Life
Custom Launcher
Add-ons
Community Driven
And so much more...
Screenshots
Changelog
Credits and Acknowledgments
check the Codename Lungo website
Links & Other info
Kernel: Stock CyanogenMod
Documentation & F.A.Q
Add-ons
Facebook & Google+!
Codename Lungo is a Community driven ROM! So we now have a Facebook Group and a Google+ Page & Community
Here you can post mods, new ideas or just chat about the ROM!
Enjoy and JOIN! Facebook Page | Google+
Download ROM!
@ Codename Lungo Website​
XDA:DevDB Information
Codename Lungo , ROM for the Moto G
Contributors
TimV_
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod
Version Information
Status: Beta
Current Beta Version: CM11
Beta Release Date: 2014-11-17
Created 2014-03-08
Last Updated 2015-01-15

One more

going to test now :good:
---------- Post added at 05:55 PM ---------- Previous post was at 05:42 PM ----------
everything is smooth and fluid i only use 335mb ram without gapps and every thing else works
:good:

Installed twice. In the first step (choosing language) it says "unfortunately, setup wizard has stopped", the screen goes black and I can only shut down or reboot, no more .
Thanks for your work! Let see if people has this problem too :good:

Feyerabend said:
Installed twice. In the first step (choosing language) it says "unfortunately, setup wizard has stopped", the screen goes black and I can only shut down or reboot, no more .
Thanks for your work! Let see if people has this problem too :good:
Click to expand...
Click to collapse
installed gapps before or after fist boot?

In the first install after the rom, as always. In the second install I flashed the rom without gapps to see what happen, and same result :/

Flashed it. As said above, there's a setup wizard problem that after picking a language it crashes the setup continuously.
I also got the gapps from your site for 4.4 for the best minimal experience with great performance
flashing the google dialer makes com.android.phone continously crash and have no service
I tried flashing w/o gapps and the setup comes again which is really weird, again it crashed
I then tried flashing w/o gapps again but this time formatted system (most install scripts format systems but some people forget to do it) and the setup didn't show up that time and was butter smooth.
After booting up w/o gapps, i tried flashing your gapps again, and it did flash. No setup wizard, though. But Google Settings and Play Store worked fine.
Also, would be nice if you could include AOSP browser, but i'm not sure if it fits the roms purpose(lightweight)

SamsungAdmire said:
Flashed it. As said above, there's a setup wizard problem that after picking a language it crashes the setup continuously.
I also got the gapps from your site for 4.4 for the best minimal experience with great performance
flashing the google dialer makes com.android.phone continously crash and have no service
I tried flashing w/o gapps and the setup comes again which is really weird, again it crashed
I then tried flashing w/o gapps again but this time formatted system (most install scripts format systems but some people forget to do it) and the setup didn't show up that time and was butter smooth.
After booting up w/o gapps, i tried flashing your gapps again, and it did flash. No setup wizard, though. But Google Settings and Play Store worked fine.
Also, would be nice if you could include AOSP browser, but i'm not sure if it fits the roms purpose(lightweight)
Click to expand...
Click to collapse
made a error while building the rom should be fixed now....

please, even in this rom, like cm11 the flip shell doesn't work when close? (no screen off)....

TimV_ said:
made a error while building the rom should be fixed now....
Click to expand...
Click to collapse
great! im gonna try it again in a bit :good::highfive:

Going to try this ROM when I will have time for it, thank you for your work.:good:

The problem persist :/

Indigoreli said:
The problem persist :/
Click to expand...
Click to collapse
Yep, again . Thanks for your work!

Feyerabend said:
Yep, again . Thanks for your work!
Click to expand...
Click to collapse
Wierd going to make a test flash on my nexus tablet to so if the problem exists there!
EDIT:
Did a install test run on my nexus tablet and getting no error here when i install the rom + gapps
here are the steps I did
1. Download latest build for my device
2. downloaded the 4.4.2_20140306_gapps
3 Placed it all on the SD Card
3. rebooted device in Recovery mode
4. did a Data/Factort reset
5. did a format /system (its in the Mounts and Storage Menu)
Installed the Rom and Rebooted the Device
6. Rebooted in to recovery mode
7. Installed the gapps
8. Rebooted Device
9. Everything is working fine..
If you still get a error then it's device specific... Than it's something I must do research on please let me know

Since this is official, shouldn't it be in Original Development?
Sent from my Moto G using XDA Premium 4 mobile app

YoshiShaPow said:
Since this is official, shouldn't it be in Original Development?
Sent from my Moto G using XDA Premium 4 mobile app
Click to expand...
Click to collapse
CM is not official or is it?

That a custom ROM is official because is compiled by some DEV on that Custom ROM team does not mean this ROM has the requirements to get Original Developement Title.
More things than being official are needed in fact to get Original Developement custom ROM status.

Works !
TimV_ said:
Wierd going to make a test flash on my nexus tablet to so if the problem exists there!
EDIT:
Did a install test run on my nexus tablet and getting no error here when i install the rom + gapps
here are the steps I did
1. Download latest build for my device
2. downloaded the 4.4.2_20140306_gapps
3 Placed it all on the SD Card
3. rebooted device in Recovery mode
4. did a Data/Factort reset
5. did a format /system (its in the Mounts and Storage Menu)
Installed the Rom and Rebooted the Device
6. Rebooted in to recovery mode
7. Installed the gapps
8. Rebooted Device
9. Everything is working fine..
If you still get a error then it's device specific... Than it's something I must do research on please let me know
Click to expand...
Click to collapse
Confirmed on Tesco UK XT1032 - followed above and working fine...
Cheers

what about xt1033 compatibility??

XT3033
what about xt1033 compatibility??:fingers-crossed::fingers-crossed::fingers-crossed:

[ROM] MIUI 4.9.28 zte blade l2

Android 4.2.2 MIUI 5 v4.8.29 for MEO A75 / ZTE BLADE L2
​
INSTALLATION:
wipe data/factory reset
wipe cache
format system/data/cache
install zip from sdcard--»download it here:
reboot.
XDA: DevDB Information
MIUI 4.8.29 STABLE
Contributors
Dev Tuga, smokerman ANY OTHER PLEASE PM ME.
ROM OS Version: 4.2.2 jellybean
ROM Kernel: Linux 3.4.x
ROM Firmware Required: 4.2.2
Based On: MIUI 5
Version Information
Status: Stable
Current Stable Version: 3.X+
Stable Release Date: 2015-01-31
Created 2015-01-31
Last Updated 2015-01-31
GPL:
The kernel included in this ROM is located inside the rom and its stock one. I have not altered anything.

video review hd:

Problem after installation
Hi,
Thanks for your work on this.
After installing it and rebooting the phone, the setup screen just stays on for about 5 seconds and then goes to a blank screen without any options and it's not possible to do anything.
There isn't any option even to call the dialer to insert PIN.
Can you please confirm that there isn't any issue with the ROM?

acruz said:
Hi,
Thanks for your work on this.
After installing it and rebooting the phone, the setup screen just stays on for about 5 seconds and then goes to a blank screen without any options and it's not possible to do anything.
There isn't any option even to call the dialer to insert PIN.
Can you please confirm that there isn't any issue with the ROM?
Click to expand...
Click to collapse
i can confirm..as you see the rom is running flawless on my MEO A75..but i ve tested with devirsilva kernel(kitkat) that changed my internal storage..you must do all wipes as i say in OP..see my youtube channel for other tutorials..how to install it.:good:

smokerman said:
i can confirm..as you see the rom is running flawless on my MEO A75..but i ve tested with devirsilva kernel(kitkat) that changed my internal storage..you must do all wipes as i say in OP..see my youtube channel for other tutorials..how to install it.:good:
Click to expand...
Click to collapse
Hi,
Already checked you tube for tutorials.
Done again all wipes.
Reinstall it again, after being stuck in lockscreen once more, this time i've pressed the charge increasing number and going completely down, i've the dialer... now a new problem raised, i've the numbers but not the button to press ok...
If i press the center and move up, i've access for the camera, after pressing power button back again into lockscreen.
I'm stuck in lockscreen...
Thanks for your help, but still no luck

Hi,
Problem solved after around 10 reboots i was able to setup.
What is happening is the following, after reboot when the phone starts up after around 2 seconds the lock screen becames active and the dialer is bigger than the screen and doesn't show the complete dialer, it's missing 0 and ok.
After the setup is complete that took the all process around 10 reboots, everything starts up correctly.
Good work on the ROM, very fluid, so far no problems detected.
Keep up the good work.

What app did you use to root the zte blade l2 ? cuz i cant find anything good..

I used Kingo Root app to root it, but I don't seem to be able to install custom recovery. Help anyone?

[ROM] Mokee 5.1.1 STABLE (Daily Driver)

First Thing First : I'm not the developer of this ROM. Just Sharing "MY" experience
It's been a long time Mokee builds are available for Mi 4i. I've been using it since 2nd last build (more than 10 days) and currently on latest built i.e. 25th Jan 2016. And I can say that it's Stable.
What's Working :
Everything, except volume rocker keys on earphone.
Highlights:
DT2W
D2TS
Ambient Display
Not even a single FCs or Reboot since installation (more than 10 days now)
CoC is working fine
FB is working fine
More than 24 hours backup (With normal use, NO intensive gaming and ~4 hours SOT)
Installation Instruction (Which I followed, You can go with normal way):
1. Flash MIUI ROM 5.6.11 (I tried to install on 7.1.1, it keep on rebooting. Tried everything, but no luck)
2. Flash TWRP as permanent Recovery
3. Root using SuperSU
4. Wipe everything (but ROM & Gapps Folders)
5. Flash ROM
6. Reboot to System (No need to set-up anything, just do next next)
7. Go to Recovery, Flash Gapps
8. Reboot to system (Again no need to set-up anything, just do next next)
9. Factory Reset (From settings, NOT from recovery)
10. Set-up now
11. Enjoy and All the Best
I know it's painful the way I set-up ROM, but yes I'm not facing any problem at all (Fingers-crossed ). We three colleagues are using it. So it's tested now (you can say)
I've only one phone and I'm using it as a daily driver.
Downloads:
ROM
Gapps : pico version

Enjoy the New ROM guys

this rom is still stuck in LP. was hoping for MM already

ajaxcbcb said:
this rom is still stuck in LP. was hoping for MM already
Click to expand...
Click to collapse
You are very much correct my friend, but again it's a very good alternative for :
1. Those who don't wanna be on MIUI.
2. Struggling to find a CM daily driver.
//TM

good to know. I couldn't take the constant reboot from Remix ROM. Just installed Mokee yesterday. So far so good. Keep my fingers crossed.

getting very high wakelock on *alarms* on any mokee rom

Yeah this is the most stable custom rom for mi4i ...
- official
- update OTA almost every week ..

Can anyone verify if fast dormancy is present in the rom? either through wakelocks or logcat(it should say fast dormancy service or otherwise)

Is ambient display working on this rom?

Hey I am not able to do it. I tried it several times, but every time it says that ERROR IN UPDATER BINARY ZIP.......I am not able to flash it. Help me.

Rajat Naik said:
Is ambient display working on this rom?
Click to expand...
Click to collapse
Yes, Check OP.

xposed support?

lineoxkun said:
xposed support?
Click to expand...
Click to collapse
works, no problem!

imagine92 said:
works, no problem!
Click to expand...
Click to collapse
Nice! Definitely will try this ROM tonight! Thanks OP for sharing [emoji1]
Sent from my MI 4i using Tapatalk

What's your SOT on MIUI 7 with similar type of use?

not happening please help. i tried flashing mokee 5.1 on my mi4i but there are some errors occuring everytime i try to do it. help on this.

sik619 said:
not happening please help. i tried flashing mokee 5.1 on my mi4i but there are some errors occuring everytime i try to do it. help on this.
Click to expand...
Click to collapse
Use twrp 2.8.7
http://forum.xda-developers.com/showthread.php?t=3204594

Is it smooth as any other moto g mobile lolipop version...becoz i always get a feel that miui is laggy..i never install a custom rom before

hey i flashed mokee and the gapps as well...but now its rebooting repeatedly. there comes this screen with welcome and the language but cant click next option..i dont know why. help me

sik619 said:
hey i flashed mokee and the gapps as well...but now its rebooting repeatedly. there comes this screen with welcome and the language but cant click next option..i dont know why. help me
Click to expand...
Click to collapse
I suggest you to use miui 6.6.10.0 glob stable before flash mokee rom

Xx

Xxxx

link5505 said:
I've tried just about every rom on the internet with my S5, and not a single one will get past the "Android is booting, starting apps" screen.
I have:
- Factory reset in TWRP (with system checked)
- Fixed permissions
- tried with/without gapps
- just about everything else
Any hope for my S5? I have had CM 13 running on it before, but recently went back to stock ROM because of some issues.
Click to expand...
Click to collapse
First of all what version are you running? 5.0 or 6.0.1? You need a 5.0 base firmware to run asop rom as having 6.0.1 will cause problems
Sent from my SM-G900P using XDA-Developers mobile app

Problem updating

I tried to update to latest official Android10 from setting
Installing stopped on 89% for a long time so i just force closed it
Now i cant try again .. when i choose the update file its stuck on 0%
Any suggestions?

DaRcK MaN said:
I tried to update to latest official Android10 from setting
Installing stopped on 89% for a long time so i just force closed it
Now i cant try again .. when i choose the update file its stuck on 0%
Any suggestions?
Click to expand...
Click to collapse
Download the full rom zip and choose local update in the upper right corner of Android system upgrade. Maybe it helps

DaRcK MaN said:
I tried to update to latest official Android10 from setting
Installing stopped on 89% for a long time so i just force closed it
Now i cant try again .. when i choose the update file its stuck on 0%
Any suggestions?
Click to expand...
Click to collapse
download OOS Updater from play store, download android 10 & installed it via Local update (or full rom+Local update)
* [ Repository thread for all versions is here] : https://forum.xda-developers.com/oneplus-7/how-to/oneplus-7-repo-oxygen-os-builds-t3937152

strongst said:
Download the full rom zip and choose local update in the upper right corner of Android system upgrade. Maybe it helps
Click to expand...
Click to collapse
My device rooted so this happened with the full rom by local update .. nothing

daitalos said:
download OOS Updater from play store, download android 10 & installed it via Local update (or full rom+Local update)
* [ Repository thread for all versions is here] : https://forum.xda-developers.com/oneplus-7/how-to/oneplus-7-repo-oxygen-os-builds-t3937152
Click to expand...
Click to collapse
Same
Can i use TWRP to flash and keep magsik with root ?

DaRcK MaN said:
Same
Can i use TWRP to flash and keep magsik with root ?
Click to expand...
Click to collapse
You can flash files from link above via stock or twrp recovery
After the Installation finish,you can flash magisk if you want be rooted your device
(requires unlocked bootloader)
https://www.androidexplained.com/oneplus-7-root/
If you want unbrick your device or go back to android 9 :
https://forum.xda-developers.com/oneplus-7/how-to/op7-unbrick-tool-to-restore-device-to-t3954325

Flashed it through TWRP .. and it just booted to same old OS like nothing happened !!
I have other question do this phone has two system partitions? Is it flashing to second partition and am stuck in first one? How to mange them?

DaRcK MaN said:
Flashed it through TWRP .. and it just booted to same old OS like nothing happened !!
I have other question do this phone has two system partitions? Is it flashing to second partition and am stuck in first one? How to mange them?
Click to expand...
Click to collapse
oneplus7 supported seamless system updates (A+B):
https://source.android.com/devices/tech/ota/ab
https://www.xda-developers.com/how-...ess-updates-affect-custom-development-on-xda/
My opinion : use the link above & turn the device back to factory condition (9 or 10) & better 9 ....
https://forum.xda-developers.com/oneplus-7/how-to/op7-unbrick-tool-to-restore-device-to-t3954325
don't do it root in android 10 ! android 10 is still in the early stages (unstable) ....what the root will help you now?
sry for english I can't help you more

daitalos said:
oneplus7 supported seamless system updates (A+B):
https://source.android.com/devices/tech/ota/ab
https://www.xda-developers.com/how-...ess-updates-affect-custom-development-on-xda/
My opinion : use the link above & turn the device back to factory condition (9 or 10) & better 9 ....
https://forum.xda-developers.com/oneplus-7/how-to/op7-unbrick-tool-to-restore-device-to-t3954325
don't do it root in android 10 ! android 10 is still in the early stages (unstable) ....what the root will help you now?
sry for english I can't help you more
Click to expand...
Click to collapse
Just for information: android 10 on OnePlus 7 isn't "unstable". Neither beta or stable. And rooting is also easy like on pie.

strongst said:
Just for information: android 10 on OnePlus 7 isn't "unstable". Neither beta or stable. And rooting is also easy like on pie.
Click to expand...
Click to collapse
okay let's discuss it
do you know that i have android10 installed from the beginning
from yesterday i am using oneplus 5 with 9.0.8 (the best rom for my opinion)
android 10 it has many shortcomings mainly (notch settings, Pocket Mode etc)
shows me a powerful lag in the launcher,mainly when the page opens to the left with the various shortcuts & sometimes the screen flickers ,wifi is delayed...
For me it's not stable yet ....Needs time and patience for stable builds but I trust the oneplus team
Root on Pie ofcourse ...For android10 disagree for now in a non-stable rom(after a few updates maybe yes)
This is my opinion I hope you understand me , my english isn't good

daitalos said:
okay let's discuss it
do you know that i have android10 installed from the beginning
from yesterday i am using oneplus 5 with 9.0.8 (the best rom for my opinion)
android 10 it has many shortcomings mainly (notch settings, Pocket Mode etc)
shows me a powerful lag in the launcher,mainly when the page opens to the left with the various shortcuts & sometimes the screen flickers ,wifi is delayed...
For me it's not stable yet ....Needs time and patience for stable builds but I trust the oneplus team
Root on Pie ofcourse ...For android10 disagree for now
This is my opinion I hope you understand me , my english isn't good
Click to expand...
Click to collapse
This is Oneplus 7 forum and root works flawlessly on Android 10, I have my op7 rooted FYI and no issues.
So saying don't do root in android 10 confuses people here
OT end

Thanks everyone solved at last
Did a factory reset
Wiped cache
Flashed latest firmware from twrp
Flashed twrp again
Booted Android 10
Factory reset again
Flashed magaik from twrp
Everything working good with root ?

DaRcK MaN said:
Thanks everyone solved at last
Did a factory reset
Wiped cache
Flashed latest firmware from twrp
Flashed twrp again
Booted Android 10
Factory reset again
Flashed magaik from twrp
Everything working good with root
Click to expand...
Click to collapse
exactly how do you "factory reset"? in TWRP? or in the OS in android settings (the old fashio way before unlocking & root)? if in TWRP, what exact options did you wipe? mine is stuck at 89% and I do not know how to fix the issue

DaRcK MaN said:
I tried to update to latest official Android10 from setting
Installing stopped on 89% for a long time so i just force closed it
Now i cant try again .. when i choose the update file its stuck on 0%
Any suggestions?
Click to expand...
Click to collapse
Go twrp recovery, look for .Ota, flash the downloaded update zip and reboot.(Must be patient for step 2 to complete)
If can't find .Ota, go to File manager app, click storage below, click 3 dot on top right coner, settings, turn Show hidden file switch on.