/*
* Your warranty is now void. Knox 0x1.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this kernel
*/
LsskernelThanks:
real_pac for testing my kernel and very usefull profiles for governors.
Kevp75 for frequencys idea and code.
6h0st for improved ramdisk ideas.
and all others for feedback and help.
* Features *
Based on idle kernel by jcadduono
QuickWakeup added
Improve memory access performance
Async I/O latency to a ssd greatly increased, 34% gain
Updated to Linux version 3.4.113
Adreno optimizations
Tone down mpdecision helps with power
Added Frandom
Improved Interactive Governor
Added yankactive Governor
Added Smartaxx and Smartaxx eps governors
Added IImpulse Governor
Added Intelli Thermal v2
Added Msm_Hotplug
Added Bricked_Hotplug
Added MSM_Limiter
Added Arch power and Gentle Fair Sleepers toggles - Disabled by default
Dynamic Readahead added
Updated Ramdisk to support Grace UX and Note 7 port roms as well as others.
Many memory optimizations
Many other Optimizations
Click to expand...
Click to collapse
Latest Changelog:
Version: 3.9UX
GPU OC to 578Mhz
Added Darkness, Nightmare, Allucard Governors.
Added WIFI Marshmallow code
Cpu frequency's fixes
swap script rermoved but can still be enabled by putting script back.
lots of other fixes and optimizations
Click to expand...
Click to collapse
When you flash this kernel it will wipe KA Data, Synapse Data if any and Install Synapse App so beware of that.
Download:
N9005 + Variants
https://mega.nz/#F!yoATUZRA!7tCDxAdCUwyt6On0sYv2NA
Older Versions:
5.1.1 V3.8:
Latest Changelog:
Version: 3.8UX Fixed
Synapse Support added, will install app when you install this kernel
mmc code revert and fixed up abit, corrects some mmc errors
Linux updated to 3.4.113 with dirty cow fix included
More security fixes
More Cpu fixes, makes phone faster and more smooth i reckon form previous versions
f2fs mount fixes in ramdisk
More optimzations
Fixed freeziing issues
Click to expand...
Click to collapse
Some bugs been reported are ext4 errors on data partition, i my self dont have them but will look into it for later versions.
When you flash this kernel it will wipe KA Data, Synapse Data if any and Install Synapse App so beware of that.
Download:
N9005 + Variants
https://mega.nz/#F!yoATUZRA!7tCDxAdCUwyt6On0sYv2NA
Older Versions:
Download folder for note 5 port hlte variants.
https://mega.nz/#F!2gpgBahD!zDp8dRx-AbwiNOhnD165tw
Lsskernel for mm ports:
3.7ux N9005 + Variants
Download:
N9005 + Variants
https://mega.nz/#F!T0xzVapZ!9Qk9iZKOfFUcnjGEP58wiw
Click to expand...
Click to collapse
3.6ux N9005 + Variants
https://mega.nz/#F!79pkjYZT!cLlzg7LeY2ENoJp1plul3w
Latest Changelog:
Version: 3.5UX
Compressed kernel with LZ4 should make phone smoother
Changed frequencys almost back to stock to fix reboots and undervolting issues
Oc up 2.6ghz
Updated more wifi code to MM version
Upfated exFat to version 1.2.19
minor fixes
Click to expand...
Click to collapse
Downloads :
https://mega.nz/#F!yxJxTQ6Z!fxVHKG4TqSQApW77Kb6Q1w
Click to expand...
Click to collapse
Version: 3.4UX
Added smartaxx eps governors
Added Intelli Thermal v2
Added MSM_Limiter
Update Ramdisk for Grace UX and other ports, so should work on all 6.0.1 TW roms.
Wireless and Bluetooth code updated with MM code.
Loads of cpu code fixes
Misc code fixes
Click to expand...
Click to collapse
Downloads :
https://mega.nz/#F!CspVVZbZ!-3n2ql1AZT5o_QV9TdVK5w
Click to expand...
Click to collapse
Version:3.3RC
Revert code to make it even more stable
Added Arch power and Gentle Fair Sleepers toggles - Disabled by default.
Added Bricked Hotplug - Disable by default
Added yankactive governor
Added Frandom
Added More frequency steps and reduce max oc to 2.5ghz to make kernel more stable and battery friendly.
Enable Mpdecsion again but disable at boot as Msn_Hotplug is still default so enabled/diable option available.
Other minor fixes.
Default max freq = 2.2ghz
New min Freq = 288mhz
Default gov is smartmax with updated values
Default hotplug is msm_hotplug with updated values but i do recommend trying bricked_hotlug.
Enable/Disable above feature using kernal auditor mod, get it here http://forum.xda-developers.com/showthread.php?t=3333549
Download:
N9005 + Variants
https://mega.nz/#F!74wGgYIS!9gE17JUpvXn0OP-u3SfqAw
Latest Changelog:
Version:3.2RC
Added BFQ scheduler update to 7.8
Slim governor
Voltage Control
Thermal Control
Overclock up to 2.8GHz now
State Notifer
Zram Support
Zcache Updated
Update Sound drivers to MM code which fixes echo on speaker on my N9005 at least on the Phroneis rom.
MSN_hotplug fixes.
smartmaxx fixes.
Various other fixes.
Added init.d script with preset kernel parameters with help from real_pac. and others.
Final note, use kernal auditor if you would like to switch governors again and remember MPDECISION is disabled.
Downloads:
N9005 + Variants
https://mega.nz/#F!61ITXQhQ!u249NMUdFHbY39fc3Sy9BA
SD card fixes
Vold issues finally fixed for miles better cpu usage.
Spd encryption added
Disabled UKSM not needed now
Improved interactive Governor
Fixed haptic feedback and other issues.
+ more optimizations
Beta test v2..5 MM kernel for note 3 n9005 only:
https://mega.nz/#!Cp5BBLAJ!w95cncTfnZ7OsOAgYwzirBWt7oU4k5BHWgpPnHc2Xbo
Untested v2..5 MM kernel for other note 3 variants :
https://mega.nz/#F!CxAjjTZC!0SsYjZSAyJsp4B8gw9KZyw
V2.11b:
Security in kernel updated
some code from SM-G900 MMXXU1CPB8 imported.
Interactive changed so phone runs a little better while still good with battery.
Plus other fixes and optimizations.
NFC still work in progress.
Beta test v2..11B MM kernel for note 3 n9005 only:
https://mega.nz/#!615VyAZY!2g6VA4wk9gJI_0KuykhuJeaRnVjWQjj0B1yDyLxF0U8
Untested variants:
https://mega.nz/#F!ytRWiaLR!JNEGqS3mLU_UuzAbpAOaag
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Donations Welcome:
http://paypal.me/lsswizard
or paypal email is [email protected]
XDA:DevDB Information
LssKernel, Kernel for the Samsung Galaxy Note 3
Contributors
lss1977
Source Code: https://github.com/lsswizard/Lsskernel-note3
Version Information
Status: Stable
Current Stable Version: 3.9UX
Created 2016-05-31
Last Updated 2017-05-30
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Download link ?
nvidia power ... ? Its good for our note ?
and QucikWakeup how it works ?
bassini said:
Download link ?
nvidia power ... ? Its good for our note ?
and QucikWakeup how it works ?
Click to expand...
Click to collapse
yep its built in an downloads on way upload is slow
lss1977 said:
yep its built in an downloads on way upload is slow
Click to expand...
Click to collapse
But QucikWakeup is like double tap2wake or its faster bot ?
i will test this kernel afap
What about support for 6.01 note 5 port.. ?????
Sent from my SM-N9005 using XDA-Developers mobile app
lss1977 said:
yep its built in an downloads on way upload is slow
Click to expand...
Click to collapse
What is quick wakeup. Is it double tap to wake,mate
Good to see a new kernel's also Base on a great one. Hope the MM support come soon.
Sent from my SM-N910F using XDA-Developers mobile app
Hello Bro,
I test it with N9005 French, DarkwolfS7E 6.0.1
instal, Wipe cache,Wipe Dalwik cache and GO...
Waiting more than 20 minutes and no reboot ...
sorry but it does not work...
Marco N9005
System usage is to hight ? Why ? And 2 cores never go offline for me
maxzl57 said:
Hello Bro,
I test it with N9005 French, DarkwolfS7E 6.0.1
instal, Wipe cache,Wipe Dalwik cache and GO...
Waiting more than 20 minutes and no reboot ...
sorry but it does not work...
Marco N9005
Click to expand...
Click to collapse
it wont work on 6.0 or 6.01 yet
Hope it's compatible with 6.0 1 soon really looking forward to its please do keep up the good work
Sent from my SM-N9005 using Tapatalk
That Kernel is compatible and with Android 5.0.
maxzl57 said:
Hello Bro,
I test it with N9005 French, DarkwolfS7E 6.0.1
instal, Wipe cache,Wipe Dalwik cache and GO...
Waiting more than 20 minutes and no reboot ...
sorry but it does not work...
Marco N9005
Click to expand...
Click to collapse
Accidently press the thanked button. Dude you should read op clearly.
Can`t download from that link, can anyone post eur variant please ? Thanks
Special_k7 said:
Can`t download from that link, can anyone post eur variant please ? Thanks
Click to expand...
Click to collapse
Here you go.
Is there any plan foe cm13?
Thank you. ...it's running smoothly
maxzl57 said:
Hello Bro,
I test it with N9005 French, DarkwolfS7E 6.0.1
instal, Wipe cache,Wipe Dalwik cache and GO...
Waiting more than 20 minutes and no reboot ...
sorry but it does not work...
Marco N9005
Click to expand...
Click to collapse
Hey brother flashing without reading is a very dangerous game.
mookiexl said:
Hey brother flashing without reading is a very dangerous game.
Click to expand...
Click to collapse
very,very,very dangerous
yes do read op and test mm kernel is up for MM 6.01 for N9005 only for now
Related
Optimus Kernel
I present to you my own kernel which has been built with many optimizations and tweaks. This kernel will work on marshmallow roms only.The main aim is to provide a stable kernel with optimizations.
I hope you all will like it
A new simple version (lollipop version) is available at post #2. Do check it out!
Note: R47 or later will work perfectly only on MarshMallow. Lollipop support was ended with R46.
Custom Features:
- Updated to latest cm-13.0 Sources
- Compiled With Custom UBER 5.3.1 Toolchain
- Compiled With -O3 & Graphite Flags
- Additional many optimization flags
- Compiled With Cortex A7 Tweaks
- ARM v7 Optimizations
- MSM_hotplug driver flavored by neobuddy
- DoubleTap2Wake/Sweep2Wake
- GPU underclock/overclock(Min:100 MHz & Max:533 MHz)
- Add dev/frandom
- Added Support for Kernel Neon Mode
- Enabled Pipe Flag
- Adreno Idler Algorithm
- Add State notifier driver
- Add Impulse governor(default)
- Add BioShock/DanceDance Govs
- Added SmartMax/LionHeart Govs
- LCD Kcal Control by Savoca
- Faux's Sound Control
- Optimized ARM RWSEM Algorithm
- Optimized Square Root Algorithm
- LMK tweaks
- block: disable add_random
- Enable unaligned capability for ARM
- CpuFreq Optimizations
- Backported hotplug thread infrastructure
- Disabled Gentle Fair Sleepers
- Enabled Many TCP Congestions
- Added SIO,VR & ZEN IO Scheduler
- Sched & Mutex Tweaks
- Pushed Read Ahead value to 512
- Use your android device as USB Keyboard/Mouse
- Enabled FSync by default
- Optimized Slub
- VFP HardFloat
- Power Efficient WorkQueues
- Kexec patched (Multirom Compatible)
- Many more things (Check Github)
Disclaimer:
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this KERNEL
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.
Pls Read This before flashing:
You need ROM's default kernel before flashing this as this kernel makes use of AnyKernel 2 by @osm0sis. Make sure you have it otherwise clean flash the kernel with the rom to avoid any issues.(At least dirty flash rom+kernel) Credits to @attack11 for some part of install script.Read FAQ's and changelogs in 2nd post. THIS KERNEL COMES FINE TUNED OUT OF THE BOX.
DOWNLOADS:
AndroidFileHost
OptimusR46NEW(Final LP version)
Mirror: (Current as well as older versions available)
Mediafire
How to Flash:
1. Download the kernel and place it into your phone storage
2. Reboot into recovery
3. Install the kernel
4. (optional) Wipe Dalvik/ART Cache and Cache partitions
5. Reboot and enjoy!
PLS DON'T MIRROR THE LINKS
Recommended app:
Synapse or Kernel Adiutor
Flash UKM.zip from the below link: (credits to @apb_axel)
http://forum.xda-developers.com/android/software/zip-synapse-script-universal-kernel-t2736986
And then install synapse from play store.
I would like to say thanks to @faux123 @YoshiShaPow @fermasia @Alberto97 @TeamMex @Quasar @Mazda @FabioSan @Blechdose @neobuddy89 @RenderBroken @savoca @deadman96385 @pinkflozd @alin.p @Cl3Kener @Shivam Kuchhal and CYANOGENMOD TEAM
and MANY MORE...
XDA:DevDB Information
Optimus Kernel, Kernel for the Moto G
Contributors
Flashhhh, Thecrazyskull
Source Code: https://github.com/desaishivam26/Optimus_Reborn
Version Information
Status: Stable
Current Stable Version: R38
Stable Release Date: 2015-05-21
Created 2015-04-24
Last Updated 2015-07-14
OptimuSimple is the version that i have been using quite often now. It's not bloated with many features and works surprisingly well compared to original version. Some of it's features:
- Updated to v3.4.109
- Compiled with Linaro 4.9 Cortex A7 optimized toolchain
- Intelliplug 4.0 by faux
- Faux Sound Control
- Kcal Control by savoca
- Simple GPU Algorithm
Optimizations and governors are same as original version. It doesn't contain dt2w. So if u want dt2w flash original version from 1st post!
Download:
https://www.androidfilehost.com/?fid=24052804347833430
Looking for changelogs??
Here they are!!!
F.A.Q. - Read this before complaining!
1. My phone exploded, HELP!
A: I don't answer to problems without a log. The log file is in /proc/last_kmsg. Paste it on pastie.org and link it on your post. Logcats are useless for Kernel purposes, don't bother posting them.
2. This kernel works on Y or X rom?
A: Works on all CM12/12.1 and AOSP roms. Not for stock roms!!
3. OMG BATTERY SUCKZ, ITZ DEAD IN 45 MINUTES, HELP!
A: As you can imagine I don't build kernels to decrease battery life. All the battery life problems come from your apps, either Facebook, or Maps, or some Location Service being enabled etc etc. Check your damn wakelocks and fix them, the kernel is not responsible for them.
4. How do I flash this?
A: Read the OP, theres a reason why I added instructions on it.
5. What is a data loss? Did I just had one?
A: Data loss is simply having the connection cut for X periods of time, usually few seconds. Grey bars means the device is not connected to Google services for some weird reason, but you'll still have internet connection.
6. OP is arrogant, I'm gonna call the Internet Police?
A: Deal with it.
Many thanks to showp1984 for this info
What is msm_mpdecision?
100% kernel based multi core decision! (should cpu1/2/3 be online or not?)
This is a special version modded by neobuddy Plus the idle frequency and some load thresholds have been adjusted by me.
Some Configuration:
startdelay = time until mpdecision starts doing it's magic (20000)
delay = time between checks (130)
pause = if something else plugs in the cpu, fall asleep for 10000ms (10 secs)
scroff_single_core = if the screen is off, don't plug in cpu1/2/3. Additionally: Unplug all cpus except cpu0 when screen is turned off (1)
enabled = enable(1) or disable(0) mpdecision. This does not affect scroff_single_core!
min_cpus = min cpus to be online, cannot be < 1. Default: 1
max_cpus = max cpus to be online, cannot be > 4. (if you set it to 2 and min_cpus to 1 you will basically have a dualcore) Default: 4
idle_freq = a value against that will be checked if a core +/- is requested. (600 MHz)
mpdecision's input event boost, aka project butter
This will boost your min cpu speed if you touch the screen or press a button and gives you full control.
In those events the min cpu freq will be risen to a predefined value on every online cpu. This boosts overall reaction times and smoothness a lot. (works similar to the qcom mpdecision binary)
Good to see one more kernel
Sent From My XT1068{LP} Using TapatalK
Will try ASAP, thanks
Installed on my XT1032 16GB CM12 . Intellidemand/Noop and it runs great , very smooth scrolling tested with G+ in the Browser.
How about the camera performance? On other kernels, it would freeze after touching the shutter and requires a reboot.
Anyways, great job on making another kernel available for Lollipop
Thanks for the intelliplug and a bunch of governors
Sent from my falcon using XDA Premium 4 mobile app
hiu115 said:
How about the camera performance? On other kernels, it would freeze after touching the shutter and requires a reboot.
Anyways, great job on making another kernel available for Lollipop
Click to expand...
Click to collapse
Camera is working fine!
You can test it for yourself
Kai Disobey said:
Installed on my XT1032 16GB CM12 . Intellidemand/Noop and it runs great , very smooth scrolling tested with G+ in the Browser.
Click to expand...
Click to collapse
Glad to hear that!
srisurya95 said:
Thanks for the intelliplug and a bunch of governors
Sent from my falcon using XDA Premium 4 mobile app
Click to expand...
Click to collapse
U r welcome
Flashed this kernel on blisspop and its awesome!!!
ROM performs pretty good with kernel and intelliplug works like a charm
Thank you @Flashhhh hope u continue development
Sent from my falcon using XDA Premium 4 mobile app
Does it support XT1033 as well?
hiu115 said:
Does it support XT1033 as well?
Click to expand...
Click to collapse
Yes!
Working great man, but please fix the gpu governors, When switching to simple_ondemand then it reboots..
DeHuMaNiZeD said:
Working great man, but please fix the gpu governors, When switching to simple_ondemand then it reboots..
Click to expand...
Click to collapse
Thanks for reporting!
Will fix it
But the next update will take a little time!
Sry
Intellithermal plzzzz..
srisurya95 said:
Intellithermal plzzzz..
Click to expand...
Click to collapse
Intellithermal isn't entirely useful on the Moto G since it runs on low clock speeds anyway. So no heating problem.
srisurya95 said:
Flashed this kernel on blisspop and its awesome!!!
ROM performs pretty good with kernel and intelliplug works like a charm
Thank you @Flashhhh hope u continue development
Sent from my falcon using XDA Premium 4 mobile app
Click to expand...
Click to collapse
sorry what version of blisspop you have?
today's build?
deltafile said:
sorry what version of blisspop you have?
today's build?
Click to expand...
Click to collapse
4/02
Sent from my falcon using XDA Premium 4 mobile app
srisurya95 said:
4/02
Sent from my falcon using XDA Premium 4 mobile app
Click to expand...
Click to collapse
ty im going to switch to it from candy rom
KaminariKernel
Code:
#include "std_disclaimer.h"
/*
* Your already voided warranty is now void again.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh my *** off at you.
* Really hard.
*/
Yo! This thread contains two kernels (regular and SuperLite). If you wanna see what SuperLite is, then go here. You should read everything before moving onto the downloads section.
Hiya fellas.
This is my modded kernel for our loved Moto G 1st gen. In the beginning I decided to keep it for my personal use only, but then I decided to share it with you guys since there was no custom kernel compatible with the 5.1 stock rom.
Features:
Sources & Optimizations
- Based on Motorola's shared falcon/peregrine source
- Compiled with generic Linaro 5.3 toolchain
- Compiled with -O3 optimization & some more flags (e.g. Pipe flag)
- Optimized ARM RWSEM & Square Root algorithms
- Kernel-side NEON mode
- Some miscellaneous armv7 tweaks
Click to expand...
Click to collapse
Hotplugging Drivers
- Ye Olde MPDecision
- AutoSMP
Click to expand...
Click to collapse
Extra CPU Governors
- Bioshock
- Dancedance
- Impulse
- Lionheart
- Smartmax
- Yankactive
- Yankdemand
- Zzmoove
Click to expand...
Click to collapse
Extra I/O Schedulers
- Bfq
- Fiops
- Sio
- Vr
- Zen (Default)
Click to expand...
Click to collapse
Sound
- Faux's Sound Control
- Headset High Performance Mode
Click to expand...
Click to collapse
Screen/GPU
- Kcal Screen Control
- Dt2w/s2w
- State Notifier driver
- Adreno Idler
- GPU overclock & underclock (533MHz/100MHz)
Click to expand...
Click to collapse
Extra Sh*t
- USB Fast Charge
- Disabled gentle fair sleepers
- Extra TCP Congestion Controllers
- HID Driver (Use your phone as a USB keyboard/mouse)
- Compass & Accelerometer drivers now use State Notifier
- Fsync enabled by default
- Kexec-hardboot patch (for multirom compatibility)
- Power-efficient workqueues
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Downloads:
Regular Version
Overclock-Ready Version
Click to expand...
Click to collapse
Looking for previous releases?
- All releases until 1.2.3: Go here
- All releases from 1.3 onwards: Go here
- KaminariLite (discontinued): Go here
- KaminariSL (previously Optimized Stock): Go here
Click to expand...
Click to collapse
Got into trouble and need to go back to the stock kernel?
Then you should click this link here, bud!
Click to expand...
Click to collapse
Flashing & Tweaking Instructions (Follow this very carefully!!!):
- Place the zip at the root of your phone's internal storage (This is very important! If you flash the zip from a subfolder, you'll be left without wi-fi!!!)
- Reboot into recovery
- Flash the zip
(Another way: Reboot into recovery without copying the zip, and flash it via adb sideload)
- (Optional) Wipe cache and/or ART cache
- Reboot and have fun!
Coming from another kernel? Then I suggest you to (at least!!!) dirty flash your stock rom and kernel in order to avoid any issues!
Wanna tweak it? Use Kernel Adiutor! (I do NOT support Synapse!!!)
Click to expand...
Click to collapse
Want some info on what this kernel offers you?
Then go here! (Credits to @AssToast for suggesting and to @gsstudios for creating the site!)
Click to expand...
Click to collapse
"Thank You" Section
- Motorola/Lenovo, for putting up them sources
- The CyanogenMod team
- @Flashhhh, his work kinda inspired me to do this
- @Aayushya, he provided the initial cherry-picks
- @faux123, for Sound Control & Intellithermal
- @savoca, for Kcal Screen Control
- @hurtsky, a huge load of cherry-picks came from his sources
- @Alberto97, for the Linux version bumps (.43 up to .109)
- @YoshiShaPow, for some more stuff
- Some more fellas whose names I can't remember
Click to expand...
Click to collapse
XDA:DevDB Information
KaminariKernel (Lollipop-Falcon), Kernel for the Moto G
Contributors
kingkaminari
Source Code: https://github.com/Kamin4ri/KaminariKernel/tree/L
Kernel Special Features: Read above!!!
Version Information
Status: Stable
Current Stable Version: R3
Stable Release Date: 2016-07-07
Created 2015-09-07
Last Updated 2016-07-09
F.A.Q. (Read this before crying!!!!)
Q: Why did you develop this kernel?
A: Read the OP.
Q: ERMAHGERD DIS KERNEL SUCKZ, MAH BATTERY IS DEAD IN 30 MINS, PLZ HALP!
A: When I created this kernel, I never had the intention to have it decrease battery life. So before / instead of complaining, go check your f***ing wakelocks and fix them! The kernel isn't responsible for this, your apps and/or services are.
Q: Will this kernel work on AOSP/CM12.1/CM13 ROMs?
A: Go here for that.
Q: Will this kernel work on the GPE ROM?
A: Yes. And it'll also allow you to use this ROM without having to format /data to ext4.
Q: How do I report bugs?
A: If you wanna report a bug, then grab your kernel log - either by pulling /proc/last_kmsg (in case of a random reboot / kernel panic or oops) or copying the output of "dmesg" via shell - and paste it at pastie.org and link it in your post (or save it to a text file and attach it to your post). Don't bother getting logcats, they don't apply for kernel debugging purposes.
Q: How do I flash this?
A: I suggest you scroll up and read the OP. The instructions are there.
Q: How do I tweak this kernel?
A: Download Kernel Adiutor from the Play Store and have fun. For Synapse, scroll up and read the OP first.
Q: This kid is such a n00b!
A: Oh well then, why don't you go work on a kernel yourself, instead of criticizing my work and, by doing so, wasting your time?
Click to expand...
Click to collapse
Kaminari SuperLite (previously "Optimized Stock Kernel")
Since KaminariLite has been discontinued, and Kaminari has become cleaner regarding features, I've been working on a version closer to the stock kernel, only more optimized.
Enter Kaminari SuperLite!
Diferences between this & the stock kernel:
- Compiled using generic Linaro 5.3 toolchain
- Bumped to Linux version 3.4.112
- Compiled with -O3 and misc optimization flags flags (Same as Kaminari)
- Most if not all of Kaminari's optimizations have been applied
- All governors except Interactive removed
- Supports both stock and GPE roms, regardless of filesystem (f2fs or ext4) used on /data
- Adds init.d support
- Default ZRAM size changed to 400MB
Click to expand...
Click to collapse
Differences between this & Kaminari:
- All governors except Interactive removed
- AutoSMP removed
- All TCP congestion algorithms except Westwood and Reno removed
- Additional I/O schedulers (zen, vr, sio, fiops, bfq) removed
- All non-essential features (FauxSound, Kcal, Dt2w...) have been removed
- Stock PowerHAL has been re-enabled
- Compressed using LZO (Kaminari uses XZ)
Click to expand...
Click to collapse
Wanna give it a try?
Click this link here!
Click to expand...
Click to collapse
Flashing & Tweaking Instructions:
Same as Kaminari.
Coming from regular Kaminari? Wipe your Kernel Adiutor data first! If you can flash the stock kernel before flashing this, it's even better!
Click to expand...
Click to collapse
Reserved!!!
Reserved again
null
Wow m first...
---------- Post added at 08:25 AM ---------- Previous post was at 08:17 AM ----------
Just flashed it...buttery smooth...smartmax works like charm and yeah happy to see the kcal screen control...thanks kaminari for this amazing kernel...
So it is only for stock 5.1 right?
Edit: Working smoothly on stock 5.1
Keep it up.
Working great on XT1031 with stock 5.1. Nice job!
@kingkaminari thanks for kernel. Any chance in future to add support for Aosp roms? that would be great.
Sent from my Moto G using Tapatalk
akshayk01 said:
@kingkaminari thanks for kernel. Any chance in future to add support for Aosp roms? that would be great.
Sent from my Moto G using Tapatalk
Click to expand...
Click to collapse
No, no plans for aosp/cm support yet - mainly because of my limited knowledge. But i'll consider making a version supporting these two
New build in the works! Just trying to fix a bug where all CPU cores stay online (needless to say that this causes a gigantic battery drain)
New build up!
https://www.androidfilehost.com/?fid=24052804347811341
https://www.androidfilehost.com/?fid=24052804347811344 - "Mori" version - with S2W/DT2W
Changelog here.
I'm getting an update binary execution error with TWRP, with both new builds. I tried disabling the device check in the anykernel.sh but no go. Also, I noticed in the init.kaminari.rc file in the zip, there is a typo in the power mode lines. It has 2 lines for cpu2 and none for cpu3. I just noticed the same thing with Optimus V41 Prime earlier today.
amarc78 said:
I'm getting an update binary execution error with TWRP, with both new builds. I tried disabling the device check in the anykernel.sh but no go. Also, I noticed in the init.kaminari.rc file in the zip, there is a typo in the power mode lines. It has 2 lines for cpu2 and none for cpu3. I just noticed the same thing with Optimus V41 Prime earlier today.
Click to expand...
Click to collapse
The previous zips i made here worked fine (i flash them through adb sideload). And i just fixed the init.kaminari.sh. Plus i've fixed s2w/s2s in the Mori version (dt2w is still partly broken though).
New build up!
Version: 0.96b
Download: Regular Version | "Mori" Version (DT2W)
Changelog here, but for those who don't wanna go there:
- Fixed s2w (dt2w halfscreen is still broken)
- Fixed derp in init.kaminari.sh
GPE users, please test my builds if you can / feel courageous enough to do it
I give up, except for the first build, they won't flash in recovery for me.
amarc78 said:
I give up, except for the first build, they won't flash in recovery for me.
Click to expand...
Click to collapse
I'll upload a zip without anykernel later. Btw, which version of twrp are you on? And do you have sufficient space in /system? Because this kernel pushes modules to it. I'm on twrp 2.8.7.0 + a modified stock rom, and i've had zero flashing errors so far
For those who are having problems with anykernel, i've uploaded special flashable zips without it.
Version is still 0.96b.
Downloads: Regular | DT2W
Version 096b flashed without any problems.
Just put the zip in the root of internal storage.
cool everything is just superb @kingkaminari hope you keep updating this kernel
This project is no longer being maintained. I'm no longer developing for the G1/G2 family.
KaminariKernel
Code:
#include "std_disclaimer.h"
/*
* Your warranty is now more void than it already was.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will simply grab my popcorn and laugh at you.
*
* Tl;dr: if your device crashes and burns, and if that gets you in trouble, it's entirely your fault. [STRIKE]Might be my fault as well, because I'm not a developer, but I don't care. lol[/STRIKE]
*/
Hiya fellas.
This is a sister project to my original (and ridiculously outdated) kernel for stock ROMs only. The version in this thread is the one designed to work with anything that isn't the stock firmware, i.e., AOSP, AospExtended, LineageOS, Resurrection Remix,... You name it. Even MIUI, which can be a b**** to get custom kernels supported on.
Features:
Sources & Optimizations
- Based on Lineage's shared falcon/peregrine/titan/thea sources
- Compiled with Linaro 4.9
- Optimized ARM RWSEM & Square Root algorithms
- Kernel-side NEON mode
- Some miscellaneous armv7 tweaks
Click to expand...
Click to collapse
Hotplugging Drivers
- MSM Hotplug
Click to expand...
Click to collapse
Extra CPU Governors
- Impulse
- Smartmax
- Yankactive
- Zzmoove
Click to expand...
Click to collapse
Extra I/O Schedulers
- Bfq
- Fiops
- Sio
- Vr
- Zen
Click to expand...
Click to collapse
Sound
- Faux's Sound Control
- Headset High Performance Mode
Click to expand...
Click to collapse
Screen/GPU
- Kcal Screen Control
- Dt2w/s2w
- Simple GPU Algorithm
- GPU overclock & underclock (533MHz/100MHz)
Click to expand...
Click to collapse
Extra Sh*t
- CPU Overclock (up to 1.6 GHz) (Overclocked version only)
- USB Fast Charge
- Disabled gentle fair sleepers
- Extra TCP Congestion Controllers
- Fsync enabled by default
- Kexec-hardboot patch (for multirom compatibility)
- Power-efficient workqueues
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Downloads:
Unified Marshmallow & Nougat (CM/LineageOS 13 & 14.x)
Click to expand...
Click to collapse
Looking for previous releases?
Go here.
Click to expand...
Click to collapse
Flashing & Tweaking Instructions (Follow this very carefully!!!):
- Place the zip at the root of your phone's internal storage
- Reboot into recovery
- Flash the zip
(Another way: Reboot into recovery without copying the zip, and flash it via adb sideload)
- Reboot again and have fun!
Coming from another kernel which isn't mine? Don't worry, no need to dirty flash the ROM/kernel anymore. The install script now does all the dirty work for you.
If you wanna "tweak ALL the things", use Kernel Adiutor! (Synapse is NOT supported!)
Click to expand...
Click to collapse
Want some info on what this kernel offers you?
Then go here! (Credits to @AssToast for suggesting and to @gsstudios for creating the site!)
Click to expand...
Click to collapse
"Thank You" Section
- Motorola/Lenovo
- Qualcomm/CodeAurora
- The CyanogenMod team
- @Flashhhh, his work kinda inspired me to do this
- @faux123, for Sound Control & Intellithermal
- @savoca, for Kcal Screen Control
- @hurtsky, a huge load of cherry-picks came from his sources
- @YoshiShaPow, for some more stuff
- Some more fellas whose names I can't remember
Click to expand...
Click to collapse
XDA:DevDB Information
KaminariKernel (AOSP/LineageOS, Falcon), Kernel for the Moto G
Contributors
kingkaminari
Source Code: https://github.com/Kamin4ri/KaminariKernel/
Kernel Special Features:
Version Information
Status: Abandoned
Current Stable Version: R12
Stable Release Date: 2018-03-04
Created 2016-01-13
Last Updated 2018-05-17
F.A.Q. (Read this before crying!!!!)
Q: Why did you develop this kernel?
A: Because I wanted to
Q: ERMAHGERD DIS KERNEL SUCKZ, MAH BATTERY IS DEAD IN 30 MINS, PLZ HALP!
A: When I created this kernel, I never had the intention to have it decrease battery life. So before / instead of complaining, go check your f***ing wakelocks and fix them! The kernel isn't responsible for this, your apps and/or services are.
Q: Will this kernel work on AOSP/CM12.1/CM13 ROMs?
A: Works on any ROM as long as it isn't stock . So yes, it does. AOSP, CM LineageOS, RR... Any of these.
Q: How do I report bugs?
A: If you wanna report a bug, then grab your kernel log - either by pulling /proc/last_kmsg (in case of a random reboot / kernel panic or oops) or copying the output of "dmesg" via shell - and paste it at pastie.org and link it in your post (or save it to a text file and attach it to your post). Don't bother getting logcats, they don't apply for kernel debugging purposes.
Q: How do I flash this?
A: I suggest you scroll up and read the OP. The instructions are there.
Q: How do I tweak this kernel?
A: Download Kernel Adiutor from the Play Store and have fun. No Synapse support!
Q: This kid is such a n00b!
A: Oh well then, why don't you go work on a kernel yourself, instead of criticizing my work and, by doing so, wasting your time?
Click to expand...
Click to collapse
Reserved
Reserved
Okay... Last reserved.
Our first test build is up! Link is at the OP.
It's still a very early test build and it may (and probably does) contain issues (serious or not). You've been warned.
This build should fix PowerHAL not being disabled.
Great work. Zero bugs in the short time since flashing. Thanks.
Hello King Kami Nari , , , Kami nari Kami Nari
What hotlplug is provides in your kernel ??
King Kami Nari
BhavikRB said:
Hello King Kami Nari , , , Kami nari Kami Nari
What hotlplug is provides in your kernel ??
King Kami Nari
Click to expand...
Click to collapse
MPDecision.
Sir King Kami Nari ,
Have you modified Interactive ?
kingkaminari said:
Created 2016-01-13
Last Updated 2016-01-12
Click to expand...
Click to collapse
Lol? xd
So far so good with the kernel thanks!
@kingkaminari Wow, finally! flashing it right now, thank you so much!
I hope to see the rest of the features present on 5.1 here on M and Thank you so much!
@kingkaminari
Will not let me change the minimum frequency of the CPU whenever I lay below 787 MHz to 5 minutes switches to the same, Tube to disable the "MPDecision" so that the frequency is not changed (sorry my english im use google traductor)
espaciox99 said:
Lol? xd
So far so good with the kernel thanks!
Click to expand...
Click to collapse
Yeah . There's this little derp with the dates lol
espaciox99 said:
@kingkaminari
Will not let me change the minimum frequency of the CPU whenever I lay below 787 MHz to 5 minutes switches to the same, Tube to disable the "MPDecision" so that the frequency is not changed (sorry my english im use google traductor)
Click to expand...
Click to collapse
Didn't have that problem here. My phone's minimum frequency stays at 300MHz all the time. Try another governor. And don't disable mpdecision
BhavikRB said:
Sir King Kami Nari ,
Have you modified Interactive ?
Click to expand...
Click to collapse
No. Interactive has been left untouched.
If you come from Hurtsky's Hybrid Kernel or Flashhhh's Optimus Kernel, don't forget to re-enable MPDecision - just rename /system/bin/mpdecisionbak to /system/bin/mpdecision.
kingkaminari said:
Didn't have that problem here. My phone's minimum frequency stays at 300MHz all the time. Try another governor. And don't disable mpdecision
Click to expand...
Click to collapse
Try and several governors and feel the same, the only solution is to disable "MPdecision"
EDIT: The problem is when you lock the phone, no matter how infrequently the minimum of changes to 787mhz cpu and if I turn off the mpdecision not happen
espaciox99 said:
Try and several governors and feel the same, the only solution is to disable "MPdecision"
EDIT: The problem is when you lock the phone, no matter how infrequently the minimum of changes to 787mhz cpu and if I turn off the mpdecision not happen
Click to expand...
Click to collapse
I actually was having a similar problem to this not long ago but not this particular kernel.
Just fooling around I found that if I flashed any kernel after rebooting system I would have the problem you described, however if I flashed the ROM, Gapps, and kernel in recovery all together before initial boot everything works as it should.
Not sure why this is but I have experimented and it is the only solution I have found so far.
NxKernel
r4
Yeah, jet another kernel for the falcon!
Why? You might ask and you are right.
I have been experimenting with kernel features, fixes and (alleged) improvements and always tried to create a kernel which I would be happy to use every day on my device. You know the usual stuff: long lasting battery with lag-free performance... It's not easy at all I have to tell. I am not a developer but know my way around Git and programming and researched a lot of sources on the internet looking for kernel stuff. Some patches offer improvements in speed and response time etc, but in reality, many of them do more harm than good when it comes to real-life praxis. In the end, I had a great collection of fixes and patches which I tried (nearly) one-by-one examining the gains and losses of 'em.
All the credits go to the developers of the features - and a little of it to me for putting them together and bringing them to the Moto G.
Features
Compiled with UBERTC 4.9.4 and O2 optimization level
Overclocked [email protected], [email protected], [email protected]
Intelliplug 4.0 CPU hotplug
Intelliactive and Intellidemand CPU governor
PowerSuspend 1.5
Intellithermal v2
Simple GPU Algorithm
Adreno Idler
Power Efficient Workqueues
Fast Charge v2
Dynamic fsync
Enabled NEON mode
Westwood TCP congestion control
Frandom fast random number generator
Wakelock toggles
Click to expand...
Click to collapse
Installation
Download the kernel to your device from the link below
Reboot to recovery
Flash the kernel
(optional) Wipe cache & dalvik cache (recommended)
Reboot
(optional for CM13 - bootloop on CM14) If you would like to enable frandom, copy the 20frandom script (by Ryuinferno, see attached) to system/etc/init.d and change its permissions to 0755.
Click to expand...
Click to collapse
Download
CM14.1/Lineage OS: r4 - https://www.androidfilehost.com/?fid=673368273298920933
CM13: r2 - v1.1 - https://www.androidfilehost.com/?fid=385035244224396903
Please do not mirror any of my files!
I switched to "r" naming scheme which means r1 (v1.0) and r2 (v1.1) are for CM13 and releases from r3 upwards for CM14.1 and Lineage OS.
Click to expand...
Click to collapse
Sources
https://github.com/NStep/android_kernel_motorola_msm8226/tree/cm-14.0-nx
Click to expand...
Click to collapse
Recommended settings in 2nd post.
Changelog in 3rd post.
Many thanks go to:
The CM Team
faux123
arter97
Hurtsky, Kaminari, pinkflozd, alinp, BryanByteZ
soniCron
...and the community for keeping alive a 3-year-old device :highfive:
Click to expand...
Click to collapse
If you would like to help or thank me, you might buy me a beer/coffe/coke to fuel the development.
XDA:DevDB Information
NxKernel, Kernel for the Moto G
Contributors
NxStep
Source Code: https://github.com/NStep/android_kernel_motorola_msm8226/tree/cm-14.0-nx
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: r4
Stable Release Date: 2017-01-03
Created 2016-10-21
Last Updated 2017-01-03
Recommended settings
I suggest Kernel Adiutor to edit the kernel settings. See attached screenshots for the details. The settings that cannot be seen on the pictures are untouched.
I've attached the two json files to import for the two custom controls in Kernel Adiutor, bluedroid_wakelock and USB_fast_charge. To be able to import directly just change the extensions to json.
*For CM13 only! Causes bootloop on CM14 for now.*
Also attached the frandom enabler script (20frandom) that is to be placed in system/etc/init.d wit the permission 0755. Make sure you remove the txt extension first!
Sorry for the extension messing, xda does not allow to upload json files or files without extension... I might move the files to my file host soon.
CPU governor tunables
*to be updated for CM14*
Optimized governor tunables based on soniCron's superb guide. It works with interactive and intelliactive as well and scales fine with overclocking enabled and disabled too.
Basically, it uses 4 optimal frequencies: 300MHz, 998MHz, 1190MHz and 1593MHz if OC enabled. It prevents the CPU jumping a lot between frequencies that do not provide enough performance for a given task. I managed to get 4-5 hours of screen on time with these settings.
Tunables are as following:
Code:
above_hispeed_delay: 20000 998400:60000
boost: 0
boostpulse_duration: 80000
go_hispeed_load: 75
hispeed_freq: 998400
io_is_busy: 1
min_sample_time: 40000
sampling_down_factor: 0
sync_freq: 0
target_loads: 98 384000:56 600000:31 787200:27 998400:82 1094400:9 1190400:95 1305600:3 1344000:4 1401600:7 1497600:6 1593600:85
timer_rate: 25000
timer_slack: 80000
two_phase_freq: 998400,998400,998400,998400
up_threshold_any_cpu_freq: 998400
up_threshold_any_cpu_load: 95
Changelog
r4 - 03.01.2017
merged latest CM14.1 kernel sources
update to latest prebuilt toolchain UBERTC 4.9 by mdalexca
added some additional patches, see Github
r3 - 25.11.2016
intial release for CM14.1
merged latest CM14.1 kernel sources
switched to "r" naming scheme
r2 - v1.1 - 11.11.2016
merged latest CM13 sources
r1 - v1.0 - 21.10.2016
initial release
Reserved another just in case.
NxStep said:
NxKernel
v1.0
Created 2016-10-21
Last Updated 2016-10-21
Click to expand...
Click to collapse
Downloaded and installed a couple of hours ago.
Feels smooth and snappy. Have not encountered any glitches.
I'm running [7.0.0_r14]AOSP+OM
Thank you for bringing another kernel to this old device.
this kernel have multirom support?
thanks for your amazing work
Pretty nice idea man, I'll test it. Thanks for this kernel
Thank your for your feedback!
aldanopolis said:
this kernel have multirom support?
thanks for your amazing work
Click to expand...
Click to collapse
No, it doesn't. I haven't really examined this feature as I use only one ROM on my phone. But I might add it in the future if it is requested.
NxStep said:
Thank your for your feedback!
No, it doesn't. I haven't really examined this feature as I use only one ROM on my phone. But I might add it in the future if it is requested.
Click to expand...
Click to collapse
IMHO, As we have no kexec workaround in last version of multirom , this is not mandatory.
Any way to backup the stock kernel of Orion Os in case I find any issue with this kernel?
Guillosd said:
Any way to backup the stock kernel of Orion Os in case I find any issue with this kernel?
Click to expand...
Click to collapse
Use Flashify
It has the option to backup the current kernel and can also flash imgs, zips and stuff.
Good to see another kernel available for our old (but seemingly immortal?) phone. Best of luck to you!
Like Kamin4ri said thanks for the kernel i really hope that moto g be immortal best phone that i used for sure, good enough for what i need.
Would be great if it has dt2w...
Aayushya said:
Use Flashify
It has the option to backup the current kernel and can also flash imgs, zips and stuff.
Click to expand...
Click to collapse
nandroid restore would work as well ,right?
Hiraethic said:
nandroid restore would work as well ,right?
Click to expand...
Click to collapse
Yes
everything works awesome on aosp 7.0 by srisuriya
Skarni said:
Downloaded and installed a couple of hours ago.
Feels smooth and snappy. Have not encountered any glitches.
I'm running [7.0.0_r14]AOSP+OM
Thank you for bringing another kernel to this old device.
Click to expand...
Click to collapse
Did you change any settings in Kernel Auditor?
---------- Post added at 10:48 AM ---------- Previous post was at 10:46 AM ----------
NxStep said:
Recommended settings
~snip
[/CODE]
Click to expand...
Click to collapse
Those pictures on second post are recommended settings?
kamesh_kraken said:
Did you change any settings in Kernel Auditor?
---------- Post added at 10:48 AM ---------- Previous post was at 10:46 AM ----------
Those pictures on second post are recommended settings?
Click to expand...
Click to collapse
I did apply some of the settings from the pictures. I chose different scheduler and network TCP algorithm.
I do not have the paid version of Kernel Adiuitor, so I was not able to use the .json files.
Skarni said:
I did apply some of the settings from the pictures. I chose different scheduler and network TCP algorithm.
I do not have the paid version of Kernel Adiuitor, so I was not able to use the .json files.
Click to expand...
Click to collapse
Use a mod, kernel adiutor is open source
Hello everybody and welcome to the SpaceLemon Kernel thread !!!
Disclaimer:
Your warranty is now void.
I am not responsible for any bricked devices, dead SD cards, nuclear war, or any kind of damage to your phone whether soft or hard brick.
Click to expand...
Click to collapse
What is SpaceLemon Kernel ?
It is a custom kernel for Samsung Galaxy Note 4 (N910H/C) devices.
It comes in 02 versions:
for standard battery
for extended battery (Zerolemon, Kranich, Hyperion etc.)
Features
Double Tap To Wake and Swipe To Sleep check this video to see how to activate them
Full synapse support
Mass-storage function in synapse
PERMISSIVE Selinux
Extended battery support (NO CALIBRATION NEEDED)
Recommendations for "extended battery"
Disable fast charging (Settings>Battery>Untick Fast Charge) check this link to see why
Let the phone charge to 100% it can take a lot of time (around 6~8 hours for Zerolemon)
Contributor: LukasAddon
Kernel Sources: https://github.com/LukasAddon/SpaceLemon-N910H-Kernel/releases
Latest versions downloads
Download links for N910C/H
Standard battery (v 2.91.45), Rooted Version and Non Rooted version
Extended battery (v 2.91.45), Rooted Version and Non Rooted version
Download links for N910S/K/L
Standard battery (v 2.91.45), Rooted Version and Non Rooted version
Extended battery (v 2.91.45), Rooted Version and Non Rooted version
Download links for N915S/K/L
Standard battery (v 2.91.45), Rooted Version and Non Rooted version
Extended battery (v 2.91.45), Rooted Version and Non Rooted version
Download links for N910U
Standard battery (v 2.91.45), Rooted Version and Non Rooted version
Extended battery (v 2.91.45), Rooted Version and Non Rooted version
Download links for N916S/K/L
Standard battery (v 2.16.3), Rooted Version and Non Rooted version
Extended battery (v 2.16.3), Rooted Version and Non Rooted version
Feel free to donate to @LukasAddon for this amazing kernel, here is his paypal address [email protected]
See Post #2 for Changelogs.
Changelogs
SpaceLemon Kernel v2.91.45 N910C/H/U (20/08/2017)
I2c_exinos5 reverted to modded again, to prevent black screen after call.
in synapse you can see all freq stats for CPU
SpaceLemon Kernel v2.73.1 N910C/H/U (20/08/2017)
add Color Saturation controll, now only saturation and sharpness
add i\o governors
gpu now use 100MHz if you set it.
A57 - 400-2100MHz , A53 - 200-1300MHz
Voltage for new cpu freq
SpaceLemon Kernel v2.40.1 N910C/H/U (17/07/2017)
Fix compile error if old configs are not deleted
N910C-H-U-S-K-L support
Latest samsung sources, security patches, speed and optimizations
Device tree updated! compilled all device tree revisions.
SpaceLemon Kernel v2.16.3 N916S/K/L (12/07/2017)
Magisk Support
Synapse config fixes
SpaceLemon Kernel v2.16.1 (29/05/2017)
Full rewrite DT2W and S2S (can work with deepsleep mode)
Disable extra log in release
More stable kernel - deleted all event handlers from DT2W and S2S, use only static functions
SpaceLemon Kernel v2.12 (23/03/2017)
Dt2w: update to 1.6
Add S2W function
Remove powersuspend from Dt2w and S2W
L2C-exynos - fix loop retries to send data to bus
Add LED control
Add screen control
GPS region choice support
Add scenario lock control
Add VM sysctrl to synapse
Add log export
Update superSU root to 2.79
Some optimizations in kernel code
SpaceLemon Kernel v2.5.5 (19/12/2016)
ADB Fixes
DT2W (Double Tap To Wake in Beta version): Please note that you'll have to double Tap twice the first to wake the Processor and the second to wake the screen (maybe it can save battery)
S2S (beta version)
Add TCP wifi algoritms (westwood default)
LCD power reduction (beta version)
TTL can be changed (add TTL module)
GPS region choice support
TCP tweaks
SpaceLemon Kernel v2.4.18/19 (25/11/2016)
Update root to 2.78
Remove red alert when phone boot
Fix install root with kernel (now root installs with kernel)
PERMISIVE mode. (some fixes)
SpaceLemon Kernel v2.3.2 (16/09/2016)
Android 6.0.1 - TouchWiz + UX support
remove interextrem governor
Add mass-storage function in synapse (to activate After every connection)
SpaceLemon Kernel v2.1.0 (06/09/2016)
Android 6.0.1 - TouchWiz + UX support
SpaceLemon Kernel v2.1.0 N910H(C)
full synapse support
Init.d support
Add UX support
TouchBoost from Note5
Dynamic Fsync
SpaceLemon Kernel v1.3.2 (27/08/2016)
Add root 2.76
Add busybox
Add bioshok gov
Fix wifi passwords
ISO & UDF CDROM support
Add NTFS support
Disable DVFS
Awesome!!! Thanks a lot @LukasAddon
Keep it up!
Hoping for 2.4.18 standard battery..
Thnak you so much to OP and Developers for this awesome kernel. Have been using it for 2 months and it is the best of the best :'D
radz_ said:
Awesome!!! Thanks a lot @LukasAddon
Keep it up!
Hoping for 2.4.18 standard battery..
Click to expand...
Click to collapse
All the credits goes to him. For the standard battery version it will come soon according to him.
TheBuduLord said:
Thnak you so much to OP and Developers for this awesome kernel. Have been using it for 2 months and it is the best of the best :'D
Click to expand...
Click to collapse
Absolutely awesome !
@danecr7
Responded to the other thread. But this thread here looks good too me, thanks for taking the time to post it for the community.
Thanks,
Bajanman
Sent from my SM-N930F using XDA Labs
I added kernel with standart battery driver to github =)))
Hi all.
Thanks for nicely heart for my n910c.
I had to install SU by TWRP cause no root after dirty flash on Ditto Note 7 ROM v0.1.
After that all work fine.
I shall try report any bugs.
Thanks for synapse btw Cheers !
LukasAddon said:
I added kernel with standart battery driver to github =)))
Click to expand...
Click to collapse
OP updated !
best_bitt said:
Hi all.
Thanks for nicely heart for my n910c.
I had to install SU by TWRP cause no root after dirty flash on Ditto Note 7 ROM v0.1.
After that all work fine.
I shall try report any bugs.
Thanks for synapse btw Cheers !
Click to expand...
Click to collapse
Which version did you try ? Because for the latest version, the kernel is pre-rooted. But you Can still flash supersu.zip file.
danecr7 said:
Which version did you try ? Because for the latest version, the kernel is pre-rooted. But you Can still flash supersu.zip file.
Click to expand...
Click to collapse
I can confirm that the phone loses root. I flashed the latest SpaceLemon (non-extended) on my N910C, which is running Ditto Note 7 0.1.
Tauras said:
I can confirm that the phone loses root. I flashed the latest SpaceLemon (non-extended) on my N910C, which is running Ditto Note 7 0.1.
Click to expand...
Click to collapse
I tested on stock firmware only. I try to fix that or debug.
Tauras said:
I can confirm that the phone loses root. I flashed the latest SpaceLemon (non-extended) on my N910C, which is running Ditto Note 7 0.1.
Click to expand...
Click to collapse
[emoji42] just flash Supersu.zip, done!
This supported all custom Rom? Doola v11?
Sent from my SM-N930F using Tapatalk
Thank bro. Keep it up
Sent from my SM-N930F using Tapatalk
Tauras said:
I can confirm that the phone loses root. I flashed the latest SpaceLemon (non-extended) on my N910C, which is running Ditto Note 7 0.1.
Click to expand...
Click to collapse
It worked for me on eRobot which is a ported ROM as DITTO, but you Can flash supersu.zip until it gets fixed.
machoguy said:
This supported all custom Rom? Doola v11?
Click to expand...
Click to collapse
Just try it and report back.
machoguy said:
This supported all custom Rom? Doola v11?
Sent from my SM-N930F using Tapatalk
Click to expand...
Click to collapse
Worked on dooola v11
Sent from my SM-N930F using Tapatalk
Which kernel u re using @danecr7.
Tks so much for ur help.
Why don't you support n910u model?