Related
Hello all,
Today I attempted to install android 4.0.3 ICS unofficially on my beloved AT&T Nexus S i9020A. I did this by unlocking my bootloader, then flashing clockwordkmod 3.0.0.0. crespo img, then flashing the stock i9020t (t-mobile) ics rom, planning to later flash the AT&T radios and get the update that way. This all failed however, because upon rebooting, my phone was stuck at the boot screen that says "google", and shows the unlocked lock, symbolizing the unlocked bootloader. I waited 15 minutes, and it would not go past this screen. I took out the battery and tried again, and still no luck. I then went back to the boot loader and into clockworkmod recovery (which still boots), and tried to install the stock i9020a 2.3.6. The install fails every time. It says there is no "cache" partition on my phone. I installed cyanogenmod 7 and it says the installation succeeded, but i still cannot boot past the google screen. I can only access the unlocked bootloader screen and clockwordmod. I have included screenshots of what happens in clockworkmod when I boot it up, or try to install a rom. Any help would really be very much appreciated. I am very sad to lose my beloved $529 phone, which has served me very well.
This is the guide I used to flash ICS:
http://dottech.org/mobile/android/25324/how-to-update-nexus-s-to-ice-cream-sandwich-android-4-x/
This is the guide I used to unlock my boot loader and flash clockwordmod:
http://forum.xda-developers.com/showthread.php?t=878446
you need a newer version of clockwork recovery, that one is old and wont work with ics. or you can try twrp recovery, i prefer it personally. i believe clockwork recovery is up to 5.0.2.X
Thank you so much! How would I flash a new version if I can't boot into any OS?
..
Ok. I've installed clockworkmod recovery touch (I believe it is the latest one) and was able to revert to cyanogenmod 7. THANK YOU SO MUCH!!! I really cannot thank you enough! You have saved my nexus!!!
monoloco1 said:
Ok. I've installed clockworkmod recovery touch (I believe it is the latest one) and was able to revert to cyanogenmod 7. THANK YOU SO MUCH!!! I really cannot thank you enough! You have saved my nexus!!!
Click to expand...
Click to collapse
no thanks needed, your excitement is enough
after unlocking thru the ez tool installed twr recovery and installed the synergy rom and its just stuck on samsung galaxy s logo please help what do i do?
flameinthefire said:
after unlocking thru the ez tool installed twr recovery and installed the synergy rom and its just stuck on samsung galaxy s logo please help what do i do?
Click to expand...
Click to collapse
Sounds like an bootloop, just odin back to stock and try again.
If you remove the battery and turn it back on, will it boot into recovery?
power+vol up+home button
Karl said:
power+vol up+home button
Click to expand...
Click to collapse
yes it turns back on but i have unlocked it and its on twp recovery which rom would work with it?
i tried flashing mr beans rom that didnt work beacuse i am on twp recovery and i tried flashing synergy rom that didnt work either so wat should i do. since i unlocked the phone can i still do odin? or will that brick my phone
guys please help!
flameinthefire said:
guys please help!
Click to expand...
Click to collapse
is there any rom that i can use for my unlocked s3
flameinthefire said:
guys please help!
Click to expand...
Click to collapse
Someone already told you what to do. Find a stock ROM, boot up Odin and flash.
the roms you tried work with TWRP... ive used TWRP since release
Karl said:
the roms you tried work with TWRP... ive used TWRP since release
Click to expand...
Click to collapse
I don't think they work with TWRP. They will flash fine but they wont boot. I had the same problem as the OP when i flashed them. I guessing its because they aren't setup for unlocked phones yet. OP all you need to do is wipe using TWRP then flash the cyanogen mod 10 leak posted by CVPS. Make sure you flash gapps and you will be good to go.
Locked or unlocked phone shouldn't matter as far as the Rom is concerned, it's been stated many times that the kexec kernels will boot fine on an unlocked phone. I would suggest starting fresh, stock ODIN, root, unlock, then flash CWM 6.0.1.0 with ez recovery and go from there.
Some people are not having any issues with the touch recoveries and others are, in my experience the CWM recovery has been the most stable and I could really care less about "touching" my recovery, buttons do the same thing. Just my 0.02
Sent from my Galaxy S III using Xda Premium
feel like an old man hearing these stories......we all know them...when we first started out flashing and **** went wrong....freak outs..panics....sweating..pacing..anger....regret.........BUT then you work through them and look back and say "**** that was easier than I thought"....and we come across them again without panic or hesitation........................dude relax........
1-grab a stock image...chose anyone you want in these forums..some are even prerooted.....i personally got competely back to stock
2-i use the one click root method..so root
3-flash cmw...any version you want as long as it is made for your model phone.....you can use e-z recovery app from market
4-MAKE A ****ING BACKUP!!! very important...
5-download e-z unlock from the play market..use...and done..now you are stock, rooted, unlock bootloader......if you plan on flashing cm10 or aokp or aosp....please make sure to read the thread "how to backup your imei" before flashing any of those roms.............boom goes the dynamite:laugh::laugh::laugh::laugh::laugh::laugh::laugh::laugh::laugh:.............................
King_tee said:
I don't think they work with TWRP. They will flash fine but they wont boot. I had the same problem as the OP when i flashed them. I guessing its because they aren't setup for unlocked phones yet. OP all you need to do is wipe using TWRP then flash the cyanogen mod 10 leak posted by CVPS. Make sure you flash gapps and you will be good to go.
Click to expand...
Click to collapse
Kexec roms don't but synergy should have. I use twrp and Synergy no problem. There isn't anything special that has to be setup for an unlocked bootloader.
Op you should be able to flash any non kexec rom. Did you do a wipe factory reset? If not you may want to give that a try
So my At&t One X (evita) has been rooted and the bootloader has been unlocked for some time now. I came from the old Htc Hero on Sprint, so I am use to rooting and flashing roms. The issue is I decided to try Cm10 and I flashed it correctly through the flash gui app. An update appeared at the top so I (like a noob) decided to install it.. I realized after the fact how I had messed up by not using flash gui (boot.img ,etc..) , So it would boot to the Htc logo and then just blackness would occur. I could and still could go to the bootloader successfully though. My mistake was doing a whole factory reset from the phone so no more TWRP recovery unit... I went back to the utility that I rooted and unlocked my bootloader on and relocked it just in case I needed to flash something such as a RUU (whatever that is) but I do have one ready to be installed. I tried to do it myself and kept getting the sentence in the picture posted... Can anyone help me??
that picture doesn't help much, my not relock bootloader run the .exe ruu. then reunlock and flash twrp then flash a rom? also flashimagegui doesnt flash a rom all it does it flash boot.img and modules or recovery. you still have to reboot into recovery and flash the rom zip. since youve used android before it is an easy fix. so fix it already =)
hrrsncrawford14 said:
So my At&t One X (evita) has been rooted and the bootloader has been unlocked for some time now. I came from the old Htc Hero on Sprint, so I am use to rooting and flashing roms. The issue is I decided to try Cm10 and I flashed it correctly through the flash gui app. An update appeared at the top so I (like a noob) decided to install it.. I realized after the fact how I had messed up by not using flash gui (boot.img ,etc..) , So it would boot to the Htc logo and then just blackness would occur. I could and still could go to the bootloader successfully though. My mistake was doing a whole factory reset from the phone so no more TWRP recovery unit... I went back to the utility that I rooted and unlocked my bootloader on and relocked it just in case I needed to flash something such as a RUU (whatever that is) but I do have one ready to be installed. I tried to do it myself and kept getting the sentence in the picture posted... Can anyone help me??
Click to expand...
Click to collapse
Had that happen to me. But just had to flash a kernel for it to boot properly. Everything fine after that.
Sent from my HTC One X using Tapatalk 2
THANKS!!! I have it working now thanks to the suggestions! :laugh::laugh:
DvineLord said:
that picture doesn't help much, my not relock bootloader run the .exe ruu. then reunlock and flash twrp then flash a rom? also flashimagegui doesnt flash a rom all it does it flash boot.img and modules or recovery. you still have to reboot into recovery and flash the rom zip. since youve used android before it is an easy fix. so fix it already =)
Click to expand...
Click to collapse
glad u got it working again. i would recommend doing s-off so you don't have to flash boot.img separately anymore.
Running XT926 with Android 4.1.2.
Rooted it, unlocked the bootloader and installed TWRP recovery.
Did a backup, because we all have learned our lessons, and attempted to flash cyanogenmod 10. Didn't work so I did some more research and found that I had to be running SafeStrap, so I installed it and followed directions. Activated rom-slot1 and again attempted to flash cm10. Said it was successful but when I tried to reboot it said that there was no OS flashed. Rebooted anyways and went continued passed the SafeStrap splash screen and the screen was blank for 20 mins, finally gave up and restarted it.
What am I missing and can you provide links.
Any and all help is appreciated.
Knew I didn't like Motorola and Verizon for a reason.
keeisenhour said:
Running XT926 with Android 4.1.2.
Rooted it, unlocked the bootloader and installed TWRP recovery.
Did a backup, because we all have learned our lessons, and attempted to flash cyanogenmod 10. Didn't work so I did some more research and found that I had to be running SafeStrap, so I installed it and followed directions. Activated rom-slot1 and again attempted to flash cm10. Said it was successful but when I tried to reboot it said that there was no OS flashed. Rebooted anyways and went continued passed the SafeStrap splash screen and the screen was blank for 20 mins, finally gave up and restarted it.
What am I missing and can you provide links.
Any and all help is appreciated.
Knew I didn't like Motorola and Verizon for a reason.
Click to expand...
Click to collapse
You hate Moto because you cant follow directions? Typical. If you unlocked your bootloader they you shouldnt be running SafeStrap. You should be using TWRP or CWM for the developer edition.
Flash TWRP again.
ADB push a ROM to your phone.
Flash ROM.
Enjoy life.
You will have to unlock the bootloader to flash most Roms available for RAZR Hd... Because all the Roms for HD out there are for unlocked bootloader... Or try to find the ROM which is compatible for safe strap...
Sent from my SCH-I545 using Tapatalk 2
---------- Post added at 05:00 AM ---------- Previous post was at 04:54 AM ----------
Sorry didn't notice you have unlocked bootloader... Just flash recovery and the game beings..
Sent from my SCH-I545 using Tapatalk 2
I've been flashing ROMs, recoveries etc for years on every android device I've had, from Samsung to nexus, HTC. Everything. This is my first Motorola and I'm having a lot of problems.
Unlocked the boot loader, flashed TWRP but wouldn't backup my stock ROM so put on Pholz recovery and it wouldn't backup either.
Tried to install C-Rom after the usual wipes and just sticks at boot screen. Tried Tweakone ROM I think its called and same problem.
Any ideas? I have the XT1032
I know about restoring to factory but what I'm asking is, is there anything specific I'm doing wrong? I'm quite an experienced flasher. Research is showing me how to recover the phone but what's gonna stop it happening again
Sent from my Nexus 5 using Tapatalk
A lot of users report issues not being able to flash rom's on 4.4.2 kitkat.
A fix is to downgrade to 4.3, then flash roms.
I dont know why. I bought my device upgraded to 4.4.2 already, and i can flash roms with no issues.
Search the forum for the topic and you will find the info you need.
Roshi69 said:
I've been flashing ROMs, recoveries etc for years on every android device I've had, from Samsung to nexus, HTC. Everything. This is my first Motorola and I'm having a lot of problems.
Unlocked the boot loader, flashed TWRP but wouldn't backup my stock ROM so put on Pholz recovery and it wouldn't backup either.
Tried to install C-Rom after the usual wipes and just sticks at boot screen. Tried Tweakone ROM I think its called and same problem.
Any ideas? I have the XT1032
I know about restoring to factory but what I'm asking is, is there anything specific I'm doing wrong? I'm quite an experienced flasher. Research is showing me how to recover the phone but what's gonna stop it happening again
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
It wont backup saying what error?
Twrp just said 'failed' in red writing after the data backup I think. And philz touch said something along the lines of Not being able to write a file into the \clockworkmod folder.
I bought the device with 4.4.2 on it and followed the guides after reading up about the problems etc but TWRP 2.7.0.0 had a lot of reports that everything was working on it so went ahead with it
Sent from my Nexus 5 using Tapatalk
Ya that's strange because philz works great for me. Do you have a USB otg to try an external backup?
Sent from my XT1032 using Tapatalk
I got the phone booted again by following a guide and flashing a stock rom.
Installed Philz recovery again and still getting the backup error. it says: E: Error while backing up boot image!
So understandably i am now scared to flash another rom in case i get a boot loop again.
*update* Strangely i flashed TWRP via CWM, rebooted into TWRP 2.7.0.0 and performed a backup successfully.
Roshi69 said:
I got the phone booted again by following a guide and flashing a stock rom.
Installed Philz recovery again and still getting the backup error. it says: E: Error while backing up boot image!
So understandably i am now scared to flash another rom in case i get a boot loop again.
*update* Strangely i flashed TWRP via CWM, rebooted into TWRP 2.7.0.0 and performed a backup successfully.
Click to expand...
Click to collapse
Why dont you use Clockwork mod recovery for flashing Rom. I have flashed 10 Roms with that and all are backed up with out any problems. TWRP has no official support for moto g, and instead of all that why don't you try Cyanogenmod ?
(sorry if my english is not perfect)
Hello,
I have exactly the same problem with my XT1032.
Bootloader unlocked, CWM (6.0.4.7) successfully installed and backup done with no issues.
But custom roms won't load...
CM11 is stuck at "bootloader unlocked warning screen" and SlimKat is stuck at slimkat logo.
I never had such problems on my Nexus..
Please help me, I don't know what's going on
TheSkweed said:
I have exactly the same problem with my XT1032.
Bootloader unlocked, CWM (6.0.4.7) successfully installed and backup done with no issues.
But custom roms won't load...
CM11 is stuck at "bootloader unlocked warning screen" and SlimKat is stuck at slimkat logo.
Click to expand...
Click to collapse
Same here. It may be possible to downgrade to 4.3 (see here), but would it then be possible to flash a 4.4.2-based custom ROM ? I'm not sure.
Heres the steps I took.
*******Before device was stuck at bootloop*******
1. Bought phone (XT1032)
2. unlocked boot loader
3. Rooted
4. Flashed Philz Recovery (wouldn't backup rom)
5. Flashed TWRP and CWM with same issue.
6. Flashed 2 ROMs to try it (TweakyOne + C-Rom, Both wouldn't boot. and tried on all recoveries.
********Steps after being stuck at bootloop*******
1. Followed this amazing guide here (https://www.youtube.com/watch?v=laU6NQ0LxR0)
2. Set up the stock ROM again
3. Flashed TWRP 2.7.0.0 via Fastboot
4. Backup worked successfully
5. installed CM11 and setup successfully
6. installed Lego rom just to assure myself (currently running this ROM)
I know this is no solution at all but just wanted to share my steps to see what maybe fixed my phone. possibly the stock 4.2.2 rom I flashed was the solution. Maybe the original factory ROM that came on the phone was the issue?