hey guys !!!! need help, i sent my phone to the service center and now as it has come back and i m going to the recovery mode i m unable to do so by switching off and pressing those two buttons power and volume which take me to the option of the recovery mode but when i try to go to the recovery mode it restarts the device.
And bcoz of dat i m unable to load any rom or anything phone :- my micromax canvas a110q plzzzzzzzzzzzz!!!!!!!!!!!!!! help fast
One method that you can try is by doing the following:
1. Download the CWM recovery image and the stock ROM.
2. Rename the CWM recovery file to "recovery.img" and place it in the stock ROM folder.
3. Use the SP Flash tools to re-write the recovery image on to the phone.
Related
Hello guys,
My A110 Canvas 2 is rooted and superuser is present on my phone. But there is no recovery in it. And I'm also unable to boot into bootloader. Flashing recovery through mobile uncle tools is also not working. In order to flash CWM recovery, I need to boot into bootloader, but I'm unable to do it. When I run the command fastboot reboot-bootloader, the phone just restarts and doesn't enter bootloader. Help needed urgently.
issue
blinkash said:
Hello guys,
My A110 Canvas 2 is rooted and superuser is present on my phone. But there is no recovery in it. And I'm also unable to boot into bootloader. Flashing recovery through mobile uncle tools is also not working. In order to flash CWM recovery, I need to boot into bootloader, but I'm unable to do it. When I run the command fastboot reboot-bootloader, the phone just restarts and doesn't enter bootloader. Help needed urgently.
Click to expand...
Click to collapse
Download ROM manager...
Click on flash clockwork mod recovery
Then u will see message on screen. "
recovery for a110 is not available"
Click option... select Micromax a70 from the
list
Download and flash ..recovery
of Micromax a70
Go to Mobile uncle tools, select recovery
update, select ur cwm file(recovery.img),
flash it.. voila
Pranesh Desai said:
Download ROM manager...
Click on flash clockwork mod recovery
Then u will see message on screen. "
recovery for a110 is not available"
Click option... select Micromax a70 from the
list
Download and flash ..recovery
of Micromax a70
Go to Mobile uncle tools, select recovery
update, select ur cwm file(recovery.img),
flash it.. voila
Click to expand...
Click to collapse
Great buddy,
Your solution worked. Thanks a lot. I'll also press the Thanks button.
Selected recovery update then this image is comes wats the next step
Sent from my Micromax A110 using xda premium
cwm
dude first put the cwm image in the SD card then open mobile tools and select recovery update and the select from SD card. now it showing recovery file in remote. so when u will put file it will show SD card
ur phone must be rooted
Hello,
My Mobile name is Micromax Bolt A69 It's Chipset Broadcom. I want to use custom rom into my mobile .. so, i need backup first but i didn't find any cwm recovery img online please anyone can give a cwm recovery for Micromax Bolt A69..or any please port a cwm recovery img. it's urgent please help ... I'll thankful to you if can do it...
Micromax A69
Sir my mmxa69 its recovery mode is deleted my me by mistake, plzz help me sir. Plz send me any recovery mode of this model. Plzzzzzz help sir i m in a very bad condition
Hi there.....please help me...I by my mistake deleted my micromax a69's recovery......How to get it back?
Any recovery will work....thanks....my email [email protected]
My device is rooted.....
Hi, If you lose your stock recovery & boot img don't worry.. i have both imgs in my cloud storage dropbox account download zip file:
http://bit.ly/1WRGe5g
How to flash stock recovery for Micromax A69 Bolt:
Follow Step by Step:
- Download zip file
- Download "Flashify" app by Google Play or Google it.
- Now extract zip file and install "Flashify"
- Open Flashify and root permission it.
- Now Select Flash Tab to Recovery image
- Click Chose Path Find it "Recovery.img" where you extracted
- Final step: hit flash button!
Now it will be rebooting to stock recovery!! if it show stock recovery then that mean you have successfully flash stock recovery..
If you any problem facing inbox me or contact.txt to find my information thanks
link is not correct
I tried to install cmw recovery on Micromax a104 after installing I tried to boot into recovery mode but my phone doest boot into recovery mode either of cmw recovery or stock android recovery mode....it shows micromax logo and then star the phone ....I tried to press volume up + power button to boot into recovery mode I am not able to do so...plz help me how to revert back to stock android recivery mode ...
Download stock rom. Load scatter file in sptool. Uncheck all check boxes except recovery. Click on download. Flashing completes. Now you can enter into stock recovery
Sent from my Micromax A104 using XDA Premium 4 mobile app
[email protected] said:
I tried to install cmw recovery on Micromax a104 after installing I tried to boot into recovery mode but my phone doest boot into recovery mode either of cmw recovery or stock android recovery mode....it shows micromax logo and then star the phone ....I tried to press volume up + power button to boot into recovery mode I am not able to do so...plz help me how to revert back to stock android recivery mode ...
Click to expand...
Click to collapse
Looks like you lost your recovery so go download stock rom and drivers and as it by sptool.
Phone : Micromax Canvas 2 i.e. a110
Android version :4.0.4
After rooting , I downloaded ROM manager and recovery file but no matter what phone always booted into stock recovery mode . So I downloaded mobile uncle tools and cwm recovery file specially for a110 from droidiser.com and went to mobile uncle tools , selected recovery update and selected the recovery file..
Now when I press volume up +volume down + power buttons I get the 2 options : recovery and factory as usual but if I choose first option , instead of going to stock recovery , logo appears and screen goes blank
XDA Visitor said:
Phone : Micromax Canvas 2 i.e. a110
Android version :4.0.4
After rooting , I downloaded ROM manager and recovery file but no matter what phone always booted into stock recovery mode . So I downloaded mobile uncle tools and cwm recovery file specially for a110 from droidiser.com and went to mobile uncle tools , selected recovery update and selected the recovery file..
Now when I press volume up +volume down + power buttons I get the 2 options : recovery and factory as usual but if I choose first option , instead of going to stock recovery , logo appears and screen goes blank
Click to expand...
Click to collapse
Hi
Thank you for using XDA Assist
You may find your way here and create and account for you to be able to post
You can post here for your inquiries and questions
You can check on this link and see where your device fits in
http://forum.xda-developers.com/micromax
Hello guys..okay so i hav mmx a106 phone...in which i tried flashing twrp recovery using flashify.
But when i boot into recovery there was micromax logo for some seconds nd den it rebooted...
Now everytym wen i boot into recovery jst mmx logo appears nd den it reboots...
Nw d prblm is hw to get into recovery mode..or hw can i go my factory recovery mode instead of any custom recovery. Its being a biy problamatic so guyss plzz help me
i_Amlesh said:
Hello guys..okay so i hav mmx a106 phone...in which i tried flashing twrp recovery using flashify.
But when i boot into recovery there was micromax logo for some seconds nd den it rebooted...
Now everytym wen i boot into recovery jst mmx logo appears nd den it reboots...
Nw d prblm is hw to get into recovery mode..or hw can i go my factory recovery mode instead of any custom recovery. Its being a biy problamatic so guyss plzz help me
Click to expand...
Click to collapse
Greetings,
Thank you for using XDA Assist.
To best assist you with your issue, I'm going to move this thread to your device's Q&A section.
You should receive expert advice there.
Good luck!
i_Amlesh said:
Hello guys..okay so i hav mmx a106 phone...in which i tried flashing twrp recovery using flashify.
But when i boot into recovery there was micromax logo for some seconds nd den it rebooted...
Now everytym wen i boot into recovery jst mmx logo appears nd den it reboots...
Nw d prblm is hw to get into recovery mode..or hw can i go my factory recovery mode instead of any custom recovery. Its being a biy problamatic so guyss plzz help me
Click to expand...
Click to collapse
Okay so you are unable to boot your device in recovery mode. You can download stock recovery or any custom recovery for your device and then again flash it using flashify. Hope it will work. If its not working let me know by replying. :good:
Flashify is unable to flash stock n custom recovery in my mmx a106. I tried it but i got same issue as amlesh
Whats you need to do is to install sp flash tool on your pc and the stock rom for your mmx unite 2 lollipop .then install sp flash tool and and execute the program ...then there will be a command 'Scatter file' ....click on that and open that in fhe Firmware folder of your Stock Rom ....the connect ur device using usb cable and then click download in the sp flash tool......after completing that disconnect ur devices and reboot it....
Wrong Choice!
Flashify and Twrp are both bad for Unite 2!
You would have flashed the Philz Recovery with SP FLash tool and then flashed the TWRP recovery using it!
Now Still you can do the same
Just google philz recovery and you will get a detailed answer there!
If you like this hit THANKS
i_Amlesh said:
Hello guys..okay so i hav mmx a106 phone...in which i tried flashing twrp recovery using flashify.
But when i boot into recovery there was micromax logo for some seconds nd den it rebooted...
Now everytym wen i boot into recovery jst mmx logo appears nd den it reboots...
Nw d prblm is hw to get into recovery mode..or hw can i go my factory recovery mode instead of any custom recovery. Its being a biy problamatic so guyss plzz help me
Click to expand...
Click to collapse
Your phone appears to have gone into a bootloop.
Here is what you can do as you can't get into the system and reboot into recovery mode. Just confirm if you are doing it the correct way.
To enter Recovery mode - turn phone completely OFF.
Recovery = Vol Down + Power (hold both down for several seconds)
This button press procedure varies with each device/model of phone.
Click to expand...
Click to collapse
If the above steps failed, proceed down below.
Things you will need:
1) USB to PC connecting cable
2) A PC where you can download one of the tools to recover (MTKDroid/SpFlash along with the device specific Scatter file)
3) USB drivers installed on your PC to connect with your phone
4) Patience to read references and follow the steps to flash recovery using Tool
CAUTION: Do steps at your own risk. Do not hesitate to ask if not sure. Post restoring recovery successfully, if you plan to flash a Custom ROM, suggest taking a backup from device using TWRP OR atleast the NVRAM using MTKDroid Tool so that you do not run into issues resulting with SIM showing No Network/Service.
Click to expand...
Click to collapse
References: (Some of the community folks have done the hard work to publish these)
SP FLASH TOOL Tutorial to install TWRP / Custom Recovery
https://forum.xda-developers.com/k3-note/general/sp-flash-tool-tutorial-to-install-twrp-t3346041
Installing custom recovery using SP Flash Tool(COMPLETE TUTORIAL)
https://forum.xda-developers.com/k3-note/general/sp-flash-tool-tutorial-to-install-twrp-t3346041
[How to/MTK65xx] ROOT, Backup & Flash (MTKDroidTools, Spflashtool, CWM) [MTK Only]
https://forum.xda-developers.com/showthread.php?t=2730031
[HOW TO]Guideline / Install MTK drivers / How to Root / Flash a Rom / IMEI Restore
https://forum.xda-developers.com/elephone-p9000/how-to/how-to-guideline-install-mtk-drivers-t3344042
Ensure to have the latest versions of TWRP and the flash tools MTKDroid AND/OR SPFlash.
To let you know, I've used the recoveries viz. CTR, TWRP, CWM, Philz on MMX a106 and haven't experienced any issues at all. Neither have I had any issues with Flashify as reported by some. Anyways its a personal experience
NOTE: If the issue is already resolved by now, please help others know it with your fix.
Click to expand...
Click to collapse
Hope this helps, happy restoring
Finally, Thank if you feel helped.