I fixed the issue by putting the stock firmware back on it. I would still like to know where I could find a twrp.tar file compatible with the Note 5 on Sprint. I know the steps to use AP in Odin while phone is in download mode. I actually got stuck in a bootloop using the .tar from twrp's website. Any help would be great!
samsung galaxy note 5
Sprint
6.0.1
http://forum.xda-developers.com/showthread.php?p=66500958
Scroll down to stage 2 if you just want the twrp tar for Odin
After flashing twrp, you must make sure oem a unlock and usb debugging is on and flash a kernel. That will get you out if the boot loop. I used Aurora kernel.
Related
the latest firmware was 4.1.2 and the note is rooted there was no problem with it then once the device crashed and restarted and stuck on galaxy note 10.1 screen and i cannot enter recovery mode only can enter download mode i tried 50 different stock rom and all kinds of recovery and pit files and there is no efffect im trying to fix this from a month ago
i can flash anything from odin and i get pass message but no effect on the device
ameer3adel said:
the latest firmware was 4.1.2 and the note is rooted there was no problem with it then once the device crashed and restarted and stuck on galaxy note 10.1 screen and i cannot enter recovery mode only can enter download mode i tried 50 different stock rom and all kinds of recovery and pit files and there is no efffect im trying to fix this from a month ago
i can flash anything from odin and i get pass message but no effect on the device
Click to expand...
Click to collapse
I have the same exact problem with my n8013
tried different recovery files and flashing the stock rom with no result always stuck at galaxy note 10.1 screen and no recovery mode.
I even tried cracking it open and disconnect the battery for few hours but no luck.
i hope someone can help
I downloaded CF-autoroot and followed these steps and now it is stuck on bootloop. I downloaded Odin 3.10.6 and right cf-auroroot version as well.
http://galaxys6root.highonandroid.co...s6-or-s6-edge/
"When done, you should see “RESET!” on ODIN program and your S6/S6 Edge will reboot to show something like below. This is where CF-Auto Root roots your S6/S6 Edge."
It never boots into recovery and it's immposible to manually boot to it as well. It just auto-reboot and stuck on "samsung powered by android."
I'm trying to download stock ROM from sammobile but its gonna take 4 hours thanks to 15 kb/s freemium download. -.-
edit: I've solved it with Samsung Kies firmware initialization but still no root
edit 2: Retried and now it's rooted
Please tell me how exactly you got out of the stuck android screen. I am in the same situation and I cant get out of it. Kies doesn't recognize my device.
If you have the AOD firmware than install twrp through ODIN and then flash the latest super SU file (2.46 or something) from chainfire's website through twrp. Beware of the deep sleep issue.
That's how i got my phone rooted.
Hello,
My N8000 was updating today and it got stuck at the samsung logo agter the "Galaxy note 10.1" screen. I am unable to access recovery mode; only download mode. I have been looking for hours for a solution but can't find any. I have tried to flash a stock ROM from sammobile not working (odin always fails) , tried flashing both custom and stock recoveries but odin keeps failing. I installed the toolkit but inorder to flash roms and stuff i need usb debugging to be enabled, and it is not. Is there a way to enable it while on bootloop?
Thanks,
Where does Odin fail ??
JJEgan said:
Where does Odin fail ??
Click to expand...
Click to collapse
When flashing stock recovery, it fails at recovery.img, flashing rom at boot.img
Suggests wrong files used .
Or possible damaged NAND .
I have a problem with my samsung galaxy s7. So i wanted to install a custom rom. It went wrong but there were no worries because i could still unlock twrp custom recovery. I had made a backup of my rom, i forgot to wipe the phone and then it got bricked. Now i can't unlock custom recovery and i have tried installing the firmware of my samsung galaxy s7 (android 8.0 oreo). It didn't work with odin because at failes the entire time. Trying a few times and i got another error: the error that says i should download samsung switch and do a emergency reboot. So I installed the smart switch software But it doesn't recognise my phone when I'm in download mode.
my SD card isn't corrupted. PLEASE HELP!!!!
Lars
Flash latest January firmware with Odin.
So I have an old SM-G920W8 that was with Rogers, but when I turned it on it would get stuck on the galaxy s6 screen. So I tried entering the recovery thing or whatever it was called but there was text at the top left that said "recovery is not seandroid enforcing", so then I tried to flash the stock firmware back on with Odin 3.10.6 with the ROM I got from Frija, but it fails every time.
ToadNugget said:
So I have an old SM-G920W8 that was with Rogers, but when I turned it on it would get stuck on the galaxy s6 screen. So I tried entering the recovery thing or whatever it was called but there was text at the top left that said "recovery is not seandroid enforcing", so then I tried to flash the stock firmware back on with Odin 3.10.6 with the ROM I got from Frija, but it fails every time.
Click to expand...
Click to collapse
Hmm ... Should work.
Have you downloaded the correct firmware?
Best to check the installation guide again and repeat it:
Samsung Galaxy S6 SM-G920W8 Stock Firmware (ROM Flash File) [DOWNLOAD]
Download the official Samsung Galaxy S6 SM-G920W8 Stock Firmware ROM (Flash File) for your Samsung Smartphone and unbrick the device, fix boot loop and more.
firmwarepanda.com
Keep in mind that flashing a different CSC with Odin needs doing a factory reset with doing data.
That is why I always prefer using "Home_CSC" to keep my CSC and data.
It_ler said:
Hmm ... Should work.
Have you downloaded the correct firmware?
Best to check the installation guide again and repeat it:
Samsung Galaxy S6 SM-G920W8 Stock Firmware (ROM Flash File) [DOWNLOAD]
Download the official Samsung Galaxy S6 SM-G920W8 Stock Firmware ROM (Flash File) for your Samsung Smartphone and unbrick the device, fix boot loop and more.
firmwarepanda.com
Keep in mind that flashing a different CSC with Odin needs doing a factory reset with doing data.
That is why I always prefer using "Home_CSC" to keep my CSC and data.
Click to expand...
Click to collapse
OK I tried that, but then it said "SW REV. CHECK FAIL. DEVICE: 5, BINARY: 3" and now the screen wont turn on
ToadNugget said:
OK I tried that, but then it said "SW REV. CHECK FAIL. DEVICE: 5, BINARY: 3" and now the screen wont turn on
Click to expand...
Click to collapse
Check this thread:
Sw rev. Check fail. Device: 5, binary 3
Hi, I've got a Galaxy S6 G920F on Vodafone that I am trying to downgrade from 7.0 to 6 or 5 so that I can go through with an unlocking procedure but I keep getting the error message " SW REV. CHECK FAIL. DEVICE: 5, BINARY 3". Can anyone help?
forum.xda-developers.com
Seems that you have to flash another firmware version.
Hi Guys,
Device: Samsung Galaxy Note N7000
Power On: Stuck with popup "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again"
Stock ROM: can't locate firmware for those BL, AP, CP, CSC files
Anyone can help? Appreciated.
Cheers