Related
Welcome to the Huawei U8860 Honor / Honour / Glory - Index!
(please treat this thread as dev-thread, it is part of a dev-forum, not Q&A)
Please don't PM me for support, I will ignore those requests - they are just too many and I'm not getting paid for that, I'm not huawei support. Just ask your questions somewhere in the forum, but in my opinion this thread is really not the place for it, since this is a developer forum and not the Q&A section. That's why xda-developers adds restrictions to post here for new users - to prevent this to be a Q&A-Forum. Please Try to ask your questions in the appropriate Q&A-Section of the xda-developer Forum.
Different versions of the Huawei Honor
There are two feature differences that I am aware of:
Number of Touch-Points: 2 or 5; I have 2 touch-points and with B977 my ProjectMenu just printed "synaptic" as touchscreen version, with B919 it states "synaptics-TPK.6"
Position of Huawei Logo on the back: in the top-left corner (china / russia?) or in the middle like this: http://kaefert.is-a-geek.org/huawei_honor/IMG_7491_small.JPG
It seem's there are versions without a camera? at least user limzm states in his signature his U8860 doesn't have one.
Backup & Recovery
In my opinion the first and most important thing when playing around with different ROMs, is the ability to backup and restore the phones ROM & state.
For this you need a custom recovery (which you will also need to flash custom ROMs, so you might only skip this if you want to only flash stock ROMs)
If you're on an 2.3.6 ROM, then possibly for this to work, you first need to flash a different stock ROM. There have been reports that with 2.3.6 the method below may not work. Also some newer ROMs like B923 and above have locked boot loaders, the latest ICS ROM that you can use for this is B919
NEW: CWM 6.0.1.0 with touch-support: MOD EDIT: Link removed.
OLD: download recovery-u8860-en.img from here MOD EDIT: Link removed.
make sure there is no directory named "dload" on your micro-sd-card - if there is, rename or remove it.
Turn off Fast-Boot, and shutdown your phone. If you don't know how to turn off Fast-Boot, pull the battery (it can be found in different places in different ROMs)
Press and hold volume-up, volume-down and power-button at the same time.
You should now see your phones screen pink (="pink screen mode")
Now connect your phone with an USB cable to a computer
A few disks should be mounted, search for the one that has an "image" folder with an recovery.img and a boot.img inside it. rename the recovery.img to recovery-bak.img (or simular) and copy recovery-u8860-en.img there and rename it to recovery.img
WARNING: Don't use the file recovery_v8.img which is referenced in a few other guides. It crashes and leaves you with non bootable phone-states and/or with unfished backups which cannot be restored.
ROMs
Stock ROMs (& leaked stock ROMs)
Stock ROMs (or leaked stock ROMs) can be flashed like this:
Download and unpack onto your micro-SD Card like that: /mnt/sdcard/dload/UPDATE.APP (some ROMs also have UPDATE_CUST.APP, copy it to the same place. If you're update has a second dload_cust (or the like) folder, you need to flash it in a second round just as the first one, by renaming it to "dload")
Turn off Fast-Boot, and shutdown your phone. If you don't know how to turn off Fast-Boot, pull the battery (it can be found in different places in different ROMs)
Press and hold volume-up, volume-down and power-button at the same time.
If everything above was done correctly, you should be able to watch your phone upgrading now.
Alternative: Some ROMs have an option in the settings that lets you start the upgrade-procedure without step 2.) and 3.) from above. If you can find it, you can use that one.
You can find stock ROMs here:
International ROMs: http://www.huaweidevice.com/worldwide/technicaIndex.do?method=gotoProductSupport&productId=3834&tb=1
Chinese ROMs (can be changed to english): http://www.huaweidevice.com/cn/technicaIndex.do?method=gotoProductSupport&productId=3884&tb=1
Huawei Germany ROM: http://huaweidevices.de/honour?show=downloads
Huawei Russia ROM: http://huaweidevice.ru/updates.html
a comprehensive german list of stock ROMs can be found here:
MOD EDIT: Link removed.
(thanks to user det-happy for pointing it out to me)
The most important Stock-ROM in my eyes (as base for most custom ROMs there are) is B919, find it here:
http://www.huaweidevice.com/cn/downloadCenter.do?method=toDownloadFile&flay=software&softid=NDE2OTU=
or here: http://kaefert.is-a-geek.org/huawei_honor/B919_official.7z
Root and Google-Apps for Stock ROMs
NEW: Rooting method for stock ICS B919/B923/B924 (and perhaps others older ICS)
http://forum.xda-developers.com/showpost.php?p=28403132&postcount=799
For people running linux on their computers, I've created an adapted version of this root tool:
kaefert.is-a-geek.org/huawei_honor/HuaweiHonorRootTool_LinuxVersion.7z
OLD: Theres a nice guide explaining how to root and flash+enable google-apps here: (but don't take the recovery from there but from above. explanation also above) - only use this if the new method above doesn't work for you.
http://forum.xda-developers.com/showpost.php?p=22688341&postcount=53
Custom ROMs
To flash custom ROMs:
download their .zip file and put it somewhere on your sd-card
boot into your custom recovery: turn off phone completly, then Long press volume up + power button (for installation of custom recovery see top of this post)
factory reset / wipe everything (not always necessary, but to be on the save side. Some ROMs will not work in some cases if you don't wipe first, however the other way round is also possible, there are custom ROMs that will NOT work if you wipe, best look at the instructions from where you downloaded the custom ROM..)
flash update zip -> choose zip from sd card.
Cyanogenmod
dolmatov94 CM 10 Version 0.9.5 (2013-01-13)
MOD EDIT: Link removed.
newer versions, look at: http://dolmatov94.ru/
Da_Nya v2.4 [with sound mod] (2012-12-30)
MOD EDIT: Link removed.
Da_Nya v2.4.1 (2013-01-09)
MOD EDIT: Link removed.
CM 10.1 (Android 4.2) from 4PDA (posted here by user tuanshungf 8th February 2013)
MOD EDIT: Link removed.
Another list of Cyanogenmod ROMs can be found here (German):
MOD EDIT: Link removed.
ShenduOS
This ROM seems to be quite popular, but before deciding to use this, think about if you really wan't to support guys that treat the open-source community like **** by violating the GPL (by not publishing their kernel sources)
Stable Versions: MOD EDIT: Link removed.
Dev Versions: MOD EDIT: Link removed.
Mixture of ShenduOS and CM, with Android 4.2
MOD EDIT: Link removed.
MOD EDIT: Link removed.
MOD EDIT: Link removed.
FrozenPika (CM10.1, Android 4.2.2, based on ShenDu) GAPPS Integrated
Posted here by user "vTIMv" on 5th March 2013, 08:58 AM - found it on 4PDA.ru, uploaded 3rd March 2013
MOD EDIT: Link removed.
Android 4.x MIUI ROMs
WARNING: most MIUI-ROMs have SMS-confirmations turned on by default, which costs extra with many providers (like mine..) so check it before sending your first SMS and turn it off
Sadly, these ROMs have serious RAM-problems, multi-tasking was quite impossible the last time I tried one of those (any app I tried to put into background was imediatly terminated)
MOD EDIT: Link removed.
Android 2.3 MIUI ROM
Creator doc3000 posted it here, have not tried it out
http://forum.xda-developers.com/showthread.php?t=1596442
WARNING: user paul89rulez informed me that you can loose your IMEI by flashing this ROM, you can find a IMEI backup app here: MOD EDIT: Link removed.
Lists of other Custom ROMs
MOD EDIT: Link removed. --> chinese u8860 forum, contains ROMs, but also other stuff concerning the u8860
MOD EDIT: Link removed. --> chinese u8860 forum, contains ROMs, but also other stuff concerning the u8860
MOD EDIT: Link removed. --> an incomplete english index of the chinese list below
MOD EDIT: Link removed.
MOD EDIT: Link removed.
Custom Kernels
I found a custom kernel that adds the option to overclock up to 2GHz. I'm used it running at 1.8GHz and it didn't seem to be any more unstable than before (I'm using the MIUI ROM which is a little bit instable all by itself already)
MOD EDIT: Link removed since you need to register to download the kernel, I also attached it MOD EDIT: Link removed to make it easier for you.
I also managed to build (and deploy) the 3.0.8 kernel sources provided by huawei myself, see http://forum.xda-developers.com/showthread.php?p=23505650
With the help of the writer of rvoix I managed to adept our kernel in a way that rvoix works, but for the moment only mono so both parties mixed together in one channel (but recorded from the line, not only from the mic like most apps do). I attach the kernel that works with rvoix: View attachment boot_voc2.img.
Or for people wanting to build their kernels themselfs, here's the patch: http://code.google.com/p/rvoix/sour...pdragon/kernel/huawei_honor_u8860_rvoix.patch
UPDATE: Since our kernel sources don't work with B919 and later (non functional camera and wifi) I decided to go the other way round and modify the rvoix app to work with our kernel instead of adapting the kernel to work with the app. Here are the results: http://code.google.com/p/rvoix/downloads/detail?name=rvoix_mod_kaefert_v2.apk --> call recording that should work with all huawei honor 4.0.3 ROMs!
Various pointers
Adapting Chinese ROMs
Adding Google Apps (like the Market) --> Download zip from here http://goo-inside.me/gapps and flash it with recovery
Remove unwanted chinese system apps --> I do it with QtADB --> http://qtadb.wordpress.com/ But I guess you can also do it with some root app management apps
Change to languages that are not choosable in the standard language setting --> https://play.google.com/store/apps/details?id=jp.co.c_lis.ccl.morelocale
Reading chinese sites
People who don't use google chrome or the chromium project (yet) probably don't know, that it has a really nice built-in translating feature, thats very useful for finding your way arround all these chinese (or russian) websites, and much better then using translate.google.com (or other such services) manually with other browsers.
Miscellaneous
Silent Huawei camera (ICS)
I was annoyed one day by all the noises the huawei camera simulates. Therefore I investigated and found out how to make it silent.
If you're interested, see http://forum.xda-developers.com/showpost.php?p=29079425&postcount=1028
Enabling logcat output on huawei phones
If your on stock ROM its quite easy, just dial *#*#2846579#*#* and enable logging in the project menu
For custom ROMs, I got a link from paul, but I didn't try it:
MOD EDIT: Link removed.
another site about enabling logcat on huawei devices:
http://stackoverflow.com/questions/...device-dev-log-main-no-such-file-or-directory
UPDATE
Sorry guys, but there won't be any updates by me anymore. I've moved on to Sony Xperia Z. The notoriosly low memory problem finally did it. (And Ingress)
There's a newer list of custom ROMs here:
http://forum.xda-developers.com/showpost.php?p=45164331&postcount=3056
Hi guys.
I've just cleaned this thread and would like to remind everyone about some points, so that they're not repeated in the future, and explain all the missing links you may notice.
Warez is strictly forbidden on XDA. Please do not link to websites that provide it, or to ROMs that contain pirated apps.
Kernels are licensed under the GPL. This means that the kernel's source should be provided. If it is not, it's illegal and will be treated as warez as far as XDA is concerned. In simpler terms: if you're posting a link to a ROM that contains a kernel, or a kernel, make sure the kernel's source is available and link to it as well.
Recoveries that aren't based on stock and that use a zImage (which is covered by the GPL) must also be provided along with the source.
Links to competing or commercial websites are not allowed. Links to websites that require registration to access downloads are also not allowed (there are exceptions, please see rule #11 for more info.)
Credits must be given, and you must have permission to share the work. Assuming that you do: if this goes against the point above, you may mention the member/website without linking directly to his work. Point #2 still applies - a link to the kernel's source must be provided if necessary.
I realize this may have caused links to your favorite custom ROMs to be removed, and I apologize about that. Many of you clearly put a lot of effort into building, maintaining and helping with this index. However, all posts must respect the rules first and foremost.
Please PM me if you have any questions or if you need further clarification.
Thanks for understanding.
Hey thanks so much for helping with this. I followed your guides and managed to get my Honor rooted and on an ICS version. Thanks so much.
limestar said:
Hey thanks so much for helping with this. I followed your guides and managed to get my Honor rooted and on an ICS version. Thanks so much.
Click to expand...
Click to collapse
You're welcome. However, for the future, if theres nothing you want to say but to give thanks to someone for a post above yours, don't answer with a post of your own, but just use the "thanks" button. Thats what it was made for.
However if there are some questions or some obscurities in my post, feel free to ask.
Sir, does the miui rom is stable for daily use,
wahyuwidi said:
Sir, does the miui rom is stable for daily use,
Click to expand...
Click to collapse
Well, I've been using it for 2 days now. I wouldn't call it stable, it has some rough edges, sometimes some system app crashes (like in the beginning I had a problem with the SMS-app), and I've had 2 complete system crashes (forced reboot) while running oruxmaps for navigation & gps-logging with my byclicle.
Check with you, if i installed the custom recovery, and root, can i revert back to stock by flashing via the settings menu or the vol/power button combination and stock rom in load directory?
cymagnus said:
Check with you, if i installed the custom recovery, and root, can i revert back to stock by flashing via the settings menu or the vol/power button combination and stock rom in load directory?
Click to expand...
Click to collapse
Well the settings menue doesn't contain the huawei upgrade option in every ROM (for example not in the MUIU ROM), but the volumn up+down while booting will probably work, I haven't tried though. The upgrade directory however has to be call "dload", not "load".
To revert back to a previous ROM I find it much better to use the nandroid backup and recover options that every recovery image I saw yet contains. However be careful, the recovery-v8.img posted on some other places is instable and crashes before the backup is finished. you won't be able to recover such an incomplete backup. Always check if you have some backup complete message, it should NOT reboot automatically after making a backup.
kaefert said:
Well, I've been using it for 2 days now. I wouldn't call it stable, it has some rough edges, sometimes some system app crashes (like in the beginning I had a problem with the SMS-app), and I've had 2 complete system crashes (forced reboot) while running oruxmaps for navigation & gps-logging with my byclicle.
Click to expand...
Click to collapse
Sir, is it ICS version that you are using? thanks.
daleylay said:
Sir, is it ICS version that you are using? thanks.
Click to expand...
Click to collapse
As stated in my first post, I'm currently using the unofficial MIUI android 4.0.3 version from here:
MOD EDIT: Link removed.
I have one or two unexpected reboots every day.
kaefert said:
As stated in my first post, I'm currently using the unofficial MIUI android 4.0.3 version from here:
MOD EDIT: Link removed.
I have one or two unexpected reboots every day.
Click to expand...
Click to collapse
What is in MIUI rom better than the official rom that you like?
cbr900 said:
What is in MIUI rom better than the official rom that you like?
Click to expand...
Click to collapse
Well the MIUI ROM has much more configuration options, for example you have a statusbar settings page where you can choose between default battery icon, percentage number or the top pixel row in green. Or also the MIUI theme chooser is really nice.
Another useful thing is the permission manager thats included that (if you config it that way) asks you whenever an app tries to use a permission that its defined to require. for example if you have an app that has the permission to send sms then the permission manager will ask you the first time that the app really sends an sms if you want to allow or deny it, and also if you want to save your choice or if it should ask next time again.
Hi, Sorry for my bad english, i have a awesome huawei honor, and i do all things that u describe in your post and run perfect but, i'm from mexico and y dont have 3G conection just Edge, do you know a way to resolve that? Thanks
Rafasdfgh said:
Hi, Sorry for my bad english, i have a awesome huawei honor, and i do all things that u describe in your post and run perfect but, i'm from mexico and y dont have 3G conection just Edge, do you know a way to resolve that? Thanks
Click to expand...
Click to collapse
Hmm. Well the only ideas I have:
1.) Theres a 2G+3G / 2G only switch, in the MIUI ROM I linked in my first post you can reach it like this:
Home Screen --> Settings --> More... (4th point under the heading Wireless & Networks) --> Mobile Networks --> Only 2G-Networks
If that switch is on, than obviously your phone won't connect to a 3G network
2.) Your not in range of a 3G network?
Apparently there is bootloop issue for the newly released MIUI ROM 2.3.23 over at MOD EDIT: Link removed.
My experience is that I got stuck at the splashscreen as well.
I have download another at MIUI main site : MOD EDIT: Link removed.
and it works OK. Some portions of the UI are with Chinese texts and a few Chinese apps but overall still OK.
cymagnus said:
Apparently there is bootloop issue for the newly released MIUI ROM 2.3.23 over at MOD EDIT: Link removed.
My experience is that I got stuck at the splashscreen as well.
I have download another at MIUI main site : MOD EDIT: Link removed.
and it works OK. Some portions of the UI are with Chinese texts and a few Chinese apps but overall still OK.
Click to expand...
Click to collapse
yep. I also flashed the version from there MOD EDIT: Link removed and am currently running it. Will update the first post again as soon as theres a working english version for the huawei over there: MOD EDIT: Link removed.
Hey could you recommend some other rom that will speed up my phone? Im currently overclocked to 1.8 Ghz using a kernel from the links you gave.
Sent from my U8860 using xda premium
EnDSK said:
Hey could you recommend some other rom that will speed up my phone? Im currently overclocked to 1.8 Ghz using a kernel from the links you gave.
Sent from my U8860 using xda premium
Click to expand...
Click to collapse
The ROMs that I know of and that I've tried you find in the first post. I found the loader (=desktop) of the non-MIUI ROMs to be faster and snappier. (However, the MIUI is more feature-rich)
Okay thanks alot I think I'm gonna give MIUI a try. Downloaded the latest version from the MIUI website. Have you tried any CM Release?
Sent from my U8860 using xda premium
EnDSK said:
Okay thanks alot I think I'm gonna give MIUI a try. Downloaded the latest version from the MIUI website. Have you tried any CM Release?
Sent from my U8860 using xda premium
Click to expand...
Click to collapse
As far as I know there is no CM (cyanogenmod) ROM for the Huawei U8860
What - This is a "One Click Root" Method instead of Swapper Method and works for Official Stock Jelly Bean leak 1,2 & 3
Where - See these two links :
Info link - http://bbs.angeeks.com/forum.php?mod=viewthread&tid=2509099&highlight=%D2%BB%BC%FCROOT
Download link - [http://pan.baidu.com/share/link?shareid=210536&uk=3926112336
How - Just double click the 双击我RunRoot+SUPERSU.bat file and wait for things to happen. (双击我 - translates as double click me) Make sure to have adequate battery level before executing.
WARNING & DISCLAIMER - This is just a information post, I have tried this myself and has worked for me and please flash this entirely at your own risk. I assume no responsibility of any nature of damage to your phone if any after flashing this.
Credits - User with whom I interacted for this info, Wanngjghost for JB 4.1.2 leak, Atrix 2 community developers & contributors for everything in general, Motorola for Atrix 2
Mirror @ post # 21
Specifically regarding Leak 3 (contribution by user _ghiottone as below to this root process)
Quote
For Leak 3 it's work, but the boot.img need to change, because, the kernel not the same version (the build number 3.0.8 too, but the additional data/name aren't equal) .
This .zip contains the leak 3 boot.img:
https://docs.google.com/file/d/0Byxxmki63A2zWVp4SlNpMUxoVjQ/edit?pli=1
All credits goes to RAD7, i change only the boot.img files.
Please click Thanks if you found this helpful.
Thanks for sharing.
Works :good::good:
nishant203 said:
Thanks for sharing.
Works :good::good:
Click to expand...
Click to collapse
So Nishant as confirmed by you it works. I believe you used this on leak 1, correct?
I mean the swapper root method was something else (pulling out battery et al) What was that thing about script runs fully in Chinese (as long as it works, no complaints though)
Today has been a great day for Atrix 2 - One click root method, 3 (T.H.R.E.E) ROM's based on JB 4.1.2, WOW, YAY..Loving it
I just wish Whirleyes gifts us BMM latest version having full support for Edison (I recall him mentioning Edison is not fully supported as the code of BMM is based off Spyder {hope i mentioned that right}) then we are set to rock with having JB 4.1.2 leak 1 as main system & three JB based roms simulataneous install option using BMM
All the text written in batch files is in Chinese so..... I'll say just blindly press any key when asked and you are rooted
Ya used it on leak 1..
Rooting on JB just easier
I have tried this out it is just so EASY to root our JB phone. Thanks to everyone who wrote the script and shared it. Thanks a ton...
I would say it has reduced the HASSLE of starting the phone in AP Fast boot mode rebooting it and then using all the commands. (No issues for the earlier method as it was really great)
Mods - Sticky please?
Mods - Sticky please? :fingers-crossed:
ravvio said:
I have tried this out it is just so EASY to root our JB phone. Thanks to everyone who wrote the script and shared it. Thanks a ton...
I would say it has reduced the HASSLE of starting the phone in AP Fast boot mode rebooting it and then using all the commands. (No issues for the earlier method as it was really great)
Click to expand...
Click to collapse
Glad
Guys please someone also confirm if rooting with one click is ok for leak 2 as well, just for everyone's clarification. Cheers!
I'll use this the next time
Busy Box part of root install??
Deleted
RAD7 said:
Does this root method work for each of the three custom ROM's??
Besides above, also can anyone confirm if this method installs Busy Box as part of the root?? If yes then version & author please.
Click to expand...
Click to collapse
You need not to root custom rom. You are installing them on phone which is already rooted
No it does not install busybox.
---------- Post added at 02:08 PM ---------- Previous post was at 01:20 PM ----------
RAD7 said:
Glad
Guys please someone also confirm if rooting with one click is ok for leak 2 as well, just for everyone's clarification. Cheers!
Click to expand...
Click to collapse
Also Works on leak 2
Do I need to install anything else for rooting thru one click? I double clicked the file but the mobile entered into flashboot mode and I had to reflash the rom to restart it.
Mode of connection
Can anyone please specify in what mode shall I connect the phone? MTP/ mass storage/ Fastboot??
[email protected] said:
Can anyone please specify in what mode shall I connect the phone? MTP/ mass storage/ Fastboot??
Click to expand...
Click to collapse
Connected MTP wth usb debugging on.. SU indtalled.. works perfectly. Thanks to the OP
Hope it works for me also after upgrading to jellybean
SuperSu update is possible
FYI - After rooting if you get update for SuperSU in Playstore go ahead & do it as it updates successfully without any issues.
RAD7 said:
What - This is a "One Click Root" Method instead of Swapper Method which is in the Stickied in particular for Leak 1 of JB 4.1.2 by Wangg (don't know if it works for leak 2)
Where - See these two links :
Info link - http://bbs.angeeks.com/forum.php?mod=viewthread&tid=2509099&highlight=%D2%BB%BC%FCROOT
Download link - [http://pan.baidu.com/share/link?shareid=210536&uk=3926112336
How - Just double click the 双击我RunRoot+SUPERSU.bat file and wait for things to happen. (双击我 - translates as double click me) Make sure to have adequate battery level before executing.
WARNING & DISCLAIMER - This is just a information post, I have tried this myself and has worked for me and please flash this entirely at your own risk. I assume no responsibility of any nature of damage to your phone if any after flashing this.
Credits - User with whom I interacted for this info, Wanngjghost for JB 4.1.2 leak, answersamir for the swapper root method, Atrix 2 community developers & contributors for everything in general, Motorola for Atrix 2
Please click Thanks if you found this helpful.
Click to expand...
Click to collapse
Hye how you oc 1.2 ghz? can u tellme? i try all method but no success.
afeeq said:
Hye how you oc 1.2 ghz? can u tellme? i try all method but no success.
Click to expand...
Click to collapse
Offtopic for this thread, many threads for OC in A2 forums, try detailing steps what you have done for OC which did not work & can revert accordingly in Troubleshooting & Q&A section. Not being rude but just sticking to thread topic.Cheers!
RAD7 said:
Offtopic for this thread, many threads for OC in A2 forums, try detailing steps what you have done for OC which did not work & can revert accordingly in Troubleshooting & Q&A section. Not being rude but just sticking to thread topic.Cheers!
Click to expand...
Click to collapse
I ask in the right forum but no answer. So, i saw your tag using 1.2 ghz. I want to ask your help. I using this http://forum.xda-developers.com/showthread.php?t=1988411 but still no luck. So, if you have other method please tell me the step. I search all forum but still did get any luck. Please help me..
afeeq said:
I ask in the right forum but no answer. So, i saw your tag using 1.2 ghz. I want to ask your help. I using this http://forum.xda-developers.com/showthread.php?t=1988411 but still no luck. So, if you have other method please tell me the step. I search all forum but still did get any luck. Please help me..
Click to expand...
Click to collapse
I meant this thread is only about One click root, you could have posted your query in the link what you sent me as below. See post # 137 in that same thread where I myself had asked question about how to overclock but now I OC on the fly to my choice ranging from 1 ghz to have gone max up to 1.4 ghz. Will post you the details in new thread in General forum for you & all our buddies who would like to read & try but out right now, check later. Cheers!
Hi,
This is awesome...
Can someone please post a mirror...??
Its downloading at 0.5 kbps...
--
Thanks in advancce,
Karthik
Hi guys for all you people out there new to the Atrix 2 and its awsm development section here is a brief glimpse on the
Great work and Development that has taken place over the years.....
Firstly we need to thank all the senior DEV's who have put in a lot of hard work to bring our A2 from
2.3.5 all the way 4.4.4 ( Doesn't Seem it will ever Stop ) Kudos to their effort...........
Stock Roms..... ( Thanks to the SBF team As well Teamfirmware )
THIS HAS ALL THE REQUIRED FILES TO BRING YOUR A2 TO STOCK aka FXZ
ICS ROM FOR AT&T
Stock / Leaked ROM's .......
1. THESE ARE THE VARIOUS JELLY BEAN LEAKS 1, 2 & 3
2. Atrix2_Jellybean_4.2.1_Asia_Version
3. Official Jellybean (4.1) for Retail CN Atrix2
NOW THE NEXT STEP IS UNDERSTANDING HOW TO USE THESE STOCK ROM'S
We have an amazing thread for that covering all aspects of what is FXZ & HOW TO USE IT etc.....
(Thnx to @alteredlikeness)
Read the above carefully to properly understand which files you need to flash for your specific region A2.
MOVING ON.........
CUSTOM ROM'S
KIT-KAT 4.0 - 4.4.3....... ( WE HAVE 4.4.3 NOW !!!!!! )
1. [ROM][4.4.4][Unofficial] CyanogenMod CM-11.0
2. [ROM][Port][4.4.3][A2EPT][Unofficial]~{LiquidSmooth v3.1}~Updated 06/19/2014
3. [ROM][PORT][4.4.2] Gummy 2.1 M1[Unofficial][A2EPT] *Updated 19/02/14*
4. [ROM]{Port}[4.4.2][Unofficial][A2EPT]Nexus Experience Rom RC1.9(Updated)02/27/2014[/B]
5. [ROM][4.4.3][AOSP][Unofficial] SlimKat - Build 5.9
6. [ROM][4.4.3] ParanoidAndroid 4.4 RC1
7. [ROM] [4.4.2] ]MagicMod For Atrix2 [Weekly [email protected]][PIE Added]
8. [ROM][4.4.3][OFFICIAL & NIGHTLIES][EDISON] MoKee OpenSource Project
9. [ROM][4.4.2] CM-11.0 | JBX | OC-1.5 GHz | HDMI | [SOURCE BUILT]
10. [ROM][4.4.3] SOKP-RC (SONIC TEAM) | JBX | OC-1.5 GHz | HDMI | [SOURCE BUILT] [A2EPT]
11. [ROM][4.4.3] AxxionKat - The Revolution Has Arrived v1.2.0 [Official][A2EPT]
12. [ROM][4.4.3][Unofficial] CarbonROM Source Build
JELLY BEAN 4.3 ......
1. [ROM][4.3][AOSP] PARANOIDANDROID 3.99-RC2
2. [ROM][4.3.1][AOSP][Unofficial Android Open Kang Project] - http://forum.xda-developers.com/showthread.php?t=2310395
3. [ROM][4.3][UNOFFICIAL]CarbonRom - http://forum.xda-developers.com/showthread.php?t=2406583
4. [ROM][4.3][OFFICIAL & NIGHTLIES]MoKee OpenSource Project - http://forum.xda-developers.com/showthread.php?t=2305303
5. [ROM][4.4.2][AOSP][Unofficial] Slim Bean - http://www.androidfilehost.com/?w=files&flid=8191
6. [ROM][4.3][OFFICIAL]PAC-man - http://forum.xda-developers.com/showthread.php?t=2409667
7. [ROM][PORT][4.3]AVATAR ROM 4.0[UNOFFICIAL] - http://forum.xda-developers.com/showthread.php?t=2298897
NOTE : The following threads above have the previous versions of their ROM's based on the other versions of Jelly Bean ( 4.1.2 - 4.2.2 )
1. [ROM][PORT][4.2.2]PACman ROM v5.0[HALO!!][UNOFFICIAL][KEXEC] - http://forum.xda-developers.com/showthread.php?t=2302027
2. [ROM] [4.1.2] MIUI v5 for Retail Asia & ATT - http://forum.xda-developers.com/showthread.php?t=2259993
3. [WIP][ROM][kexec/ICS][JB][AT&T]Official China 4.1.2 leak - http://forum.xda-developers.com/showthread.php?t=2323111
4. [ROM][PORT][4.2.2]DIRTY UNICORN v3.6[UNOFFICIAL] - http://forum.xda-developers.com/showthread.php?t=2321923
5. [ROM][4.2.2][UNOFFICIAL]CarbonRom - http://forum.xda-developers.com/showthread.php?t=2381959
6. [4.2.2]PUB PROJECT UNICORN BUTTER v1.0[UNOFFICIAL AOKP] - http://forum.xda-developers.com/showthread.php?t=2301591
7. [ROM][PORT][4.2.2]Stock AOKP[UNOFFICIAL][KEXEC] - http://forum.xda-developers.com/showthread.php?t=2325994
8. [ROM][PORT][4.2.2]LIQUIDSMOOTH v2.8[UNOFFICIAL] - http://forum.xda-developers.com/showthread.php?t=2296293
9. [ROM][4.2.2] JellyBeer v4.33 - http://forum.xda-developers.com/showthread.php?t=2377076
10. [ROM] 4.2.2 CM 10.1 - http://forum.xda-developers.com/showthread.php?t=2121029
11.Angeeks_MotoME865_4.12_6902_UISS_CN_Q2 - http://forum.xda-developers.com/showthread.php?t=2159040
Now for all you people who want custom ICS ROM's on your A2
1. NUMA 3.0 - http://forum.xda-developers.com/showthread.php?t=1960679
2. ICSupercharged - http://forum.xda-developers.com/showthread.php?t=1648421
3. MIUI V4 - http://forum.xda-developers.com/showthread.php?t=1847360
4. [ROM] 4.0.4 MIUIv4 2.10.12 Unofficial MB865 - http://forum.xda-developers.com/showthread.php?t=1847360
5. [ROM] (ICS) SwiftyTrix v1.3 - http://forum.xda-developers.com/showthread.php?t=1879475
6. [ROM] ME865 ONLY | Official MIUI 2.10.12 - http://forum.xda-developers.com/showthread.php?t=1914096
Sorry if i forgot to mention anyone....
[NOTE : FLASHING CUSTOM ROM'S IS AT YOUR RISK AND THE OWNER OF THIS THREAD AND THE OP'S OF THE ABOVE THREADS
ARE NOT RESPONSIBLE]
RECOVERIES :
1. BOOT MENU MANAGER ( https://play.google.com/store/apps/details?id=com.projectlense.bootmenu.manager&hl=en[/ ) aka BMM
2. CWM TOUCH ( http://forum.xda-developers.com/showthread.php?t=1686598&highlight=cwm)
[ As most of the new ROM's are all BMM compatible it is advised to use it instead of CWM ]
A detailed guide on BMM and how to use it is given here for MULTI Booting ROM's ( http://forum.xda-developers.com/showthread.php?t=2115715 )
CUSTOM KERNEL's :
1. [KERNEL][3.0.31][HDMI][FULL HD][GUIDE 1.8]JBX-Kernel Hybrid [1,5ghz]
( http://forum.xda-developers.com/showthread.php?t=2320784 )
[ @dtrail1 Rulzzz ]
This kernel is in a .zip format and can be directly flashed via BMM
These give you direct access to your CPU and Over clocking features
[ Note the 0.8xx kernels are for 4.2.2 and below and 1.x for 4.3 for Kit-Kat 2.0 & 3.0 onwards]
I will keep adding all the remaining ROM's to this thread and plzz feel free to post any new ones so that i can add them to the list....
IT WAS HIGH TIME SOMEONE MADE AN INDEX OF THE AVAILABLE ROM'S FOR OUR BELOVED A2
ENJOY !!!!!
DON'T FORGET TO CLICK ON THE THANKS BUTTON IF THIS HELPED YOU XD
Hi
This thread is for all you people new to the atrix 2
it is a simple way to view all that we have in store for customizing the a2.......:d
The problem with this kind of thread is that it is rare that the people that need it spelled out for them like this won't bother taking the time to read them. Good effort though.
u have missed something in OP .... u forgot to put CM10 on list ....
as i know..., we will got the official one soon... :laugh:
btw ..., nice thread for noob ... :good:
I put up this thread to help all those noobs who keep posting what should i do which ROM should i download my Ctd.bin file error when i flash RSD
this is to simplify it for all of them
And i noticed our A2 doesnt have a list of ROM's and an index page so i think it will be useful to everyone
as it covers a wide range of problems
Although its a WIP ill keep adding more tips and other ROM's it will be easier to access all the links in one page rather than searching
all the forums for the correct one......
Just a thread to Help everyone and show our appreciation to the DEV's who made it all happen....
1BadWolf said:
The problem with this kind of thread is that it is rare that the people that need it spelled out for them like this won't bother taking the time to read them. Good effort though.
Click to expand...
Click to collapse
All the ppl on the apex noob q&a thread keep asking the same questions and dont bother even searching the forums
This thread will answer most of their problems and decrease the amount of noob posts regarding the same problem over and over again
Just post this thread whenever they ask something that way they can see all the issues in one place and get all their issues solved.
darth_nihar said:
All the ppl on the apex noob q&a thread keep asking the same questions and dont bother even searching the forums
This thread will answer most of their problems and decrease the amount of noob posts regarding the same problem over and over again
Just post this thread whenever they ask something that way they can see all the issues in one place and get all their issues solved.
Click to expand...
Click to collapse
Or simply tell them to read over the development section. This forum has always had a problem with repetitive questions. Encouraging others to read and educate themselves can help to resolve some (but not all) of that. I'm not saying that you were wrong in posting this thread, just don't be surprised or discouraged when it inevitably gets ignored by those who would benefit the most from it.
If I had a dollar for every time I said that, I'd be making money in a very weird way.
1BadWolf said:
Or simply tell them to read over the development section. This forum has always had a problem with repetitive questions. Encouraging others to read and educate themselves can help to resolve some (but not all) of that. I'm not saying that you were wrong in posting this thread, just don't be surprised or discouraged when it inevitably gets ignored by those who would benefit the most from it.
If I had a dollar for every time I said that, I'd be making money in a very weird way.
Click to expand...
Click to collapse
What u said is true but no harm in trying LOL.....
1BadWolf said:
Or simply tell them to read over the development section. This forum has always had a problem with repetitive questions. Encouraging others to read and educate themselves can help to resolve some (but not all) of that. I'm not saying that you were wrong in posting this thread, just don't be surprised or discouraged when it inevitably gets ignored by those who would benefit the most from it.
If I had a dollar for every time I said that, I'd be making money in a very weird way.
Click to expand...
Click to collapse
Dude i still can't get the audio to work with that renaming Droidhd.ogg ne luck on another workaround
Btw i boosted the sound and made it louder ill send you the file tonight...
darth_nihar said:
Dude i still can't get the audio to work with that renaming Droidhd.ogg ne luck on another workaround
Btw i boosted the sound and made it louder ill send you the file tonight...
Click to expand...
Click to collapse
Make sure that it is not capitalized. If you want to see the exact name that the system is looking for then open the zip, find the file named desc.txt and open it in a text editor/viewer. You'll see a line that looks like:
s droidhd.ogg
The "s" means that the animation will use a sound and what follows is what the name of the sound is. Then just make sure that the bootanimation.zip and the audio file are both in /system/media with the correct permissions, etc.
As far as getting it running on jb. I haven't found anything that seems to work. From what I've read, it seems as though it might have to be supported by the ROM and/or kernel. But I'm not positive of that.
If I had a dollar for every time I said that, I'd be making money in a very weird way.
1BadWolf said:
Make sure that it is not capitalized. If you want to see the exact name that the system is looking for then open the zip, find the file named desc.txt and open it in a text editor/viewer. You'll see a line that looks like:
s droidhd.ogg
The "s" means that the animation will use a sound and what follows is what the name of the sound is. Then just make sure that the bootanimation.zip and the audio file are both in /system/media with the correct permissions, etc.
As far as getting it running on jb. I haven't found anything that seems to work. From what I've read, it seems as though it might have to be supported by the ROM and/or kernel. But I'm not positive of that.
If I had a dollar for every time I said that, I'd be making money in a very weird way.
Click to expand...
Click to collapse
i did tht let me see if its ROM specific :laugh:
1BadWolf said:
Make sure that it is not capitalized. If you want to see the exact name that the system is looking for then open the zip, find the file named desc.txt and open it in a text editor/viewer. You'll see a line that looks like:
s droidhd.ogg
The "s" means that the animation will use a sound and what follows is what the name of the sound is. Then just make sure that the bootanimation.zip and the audio file are both in /system/media with the correct permissions, etc.
As far as getting it running on jb. I haven't found anything that seems to work. From what I've read, it seems as though it might have to be supported by the ROM and/or kernel. But I'm not positive of that.
If I had a dollar for every time I said that, I'd be making money in a very weird way.
Click to expand...
Click to collapse
Still cant get it to work>>>
bump
bump Read this before going to the noob/apex thread.......most of ur questions will be answered here:silly:
Thank you so much. Saved me from that dreaded AT&T ICS.
Sent from my MB865 using XDA Premium 4 mobile app
CreativeSin said:
Thank you so much. Saved me from that dreaded AT&T ICS.
Sent from my MB865 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Np always happy to help
(AS LONG AS U CLICK ON THE THANKS BUTTON )
Az-one786 said:
u have missed something in OP .... u forgot to put CM10 on list ....
as i know..., we will got the official one soon... :laugh:
btw ..., nice thread for noob ... :good:
Click to expand...
Click to collapse
We wont get CM official Hashcode said he will not work on moto OMAP devices so we are not on the list............
But we will still get ports and PA is kinda Official so no problem there
Can't wait 4 KIT-KAT to come for our device i hope @Hashcode does his magic and brings it life for our A2
Just been a silent observer and tester for atrix2 roms here...and finally i've found the best match...
PA 3.99 stable build + this kernel JBX-Kernel-1.4-Hybrid-4.3_2013-11-07.zip
It gives me awesome battery life and performance...
Trickster mod settings-
Interactivex with Min (300) and Max (1000)
Please spread the word...cheers.
xmotouserx said:
Just been a silent observer and tester for atrix2 roms here...and finally i've found the best match...
PA 3.99 stable build + this kernel JBX-Kernel-1.4-Hybrid-4.3_2013-11-07.zip
It gives me awesome battery life and performance...
Trickster mod settings-
Interactivex with Min (300) and Max (1000)
Please spread the word...cheers.
Click to expand...
Click to collapse
There is nothing like the perfect ROM its the dev's who put in the hardwork to make it possible
So please don't say this is the perfect ROM etc...
Each ROM is unique in its own way and everyone has their own perfect ROM that suits them........
So keep flashing all the amazing ROM's we have and choose what best suits your needs......:silly:
This is probably a dumb question, and I'm sure there's a thread about it that I couldn't find, but to install a custom kernel would you just go into BMM recovery and install zip like with the ROM, GApps, etc.? And if so, any extra steps to take to install it without having to like reflash the ROM and losing all my ****?
Sent from my MB865 using XDA Premium 4 mobile app
//
Thanks for work, I will test it tonight
How are you guys rooting your phones? I didn't think there was a way yet... Does it trip knox?
Tripledrop said:
How are you guys rooting your phones? I didn't think there was a way yet... Does it trip knox?
Click to expand...
Click to collapse
Check the Rom section and yes it trips knox
Brilliant, thanks
work perfectly many thanks
riso123 said:
Check the Rom section and yes it trips knox
Click to expand...
Click to collapse
There is no root guide in the ROM section, just Kali rom, twrp and forum rules/mods. Maybe a link would be helpful.
Update: I guess they are talking about it in the TWRP post, seems out of place considering the ROM section is not meant for discussion.
http://forum.xda-developers.com/s7-edge/development
DesignGrits said:
There is no root guide in the ROM section, just Kali rom, twrp and forum rules/mods. Maybe a link would be helpful.
Update: I guess they are talking about it in the TWRP post, seems out of place considering the ROM section is not meant for discussion.
http://forum.xda-developers.com/s7-edge/development
Click to expand...
Click to collapse
When u have TWRP just flash SuperSu from chainfire site, last version and u will have root.
kajkac said:
When u have TWRP just flash SuperSu from chainfire site, last version and u will have root.
Click to expand...
Click to collapse
No root for T-Mobile version, locked bootloader too
Thanks, work fine for me.
Well that's depressing. I can't wait for root on my T-Mobile S7 Edge.
DesignGrits said:
There is no root guide in the ROM section, just Kali rom, twrp and forum rules/mods. Maybe a link would be helpful.
Update: I guess they are talking about it in the TWRP post, seems out of place considering the ROM section is not meant for discussion.
http://forum.xda-developers.com/s7-edge/development
Click to expand...
Click to collapse
I guess you couldn't read the 3 threads there?
riso123 said:
I guess you couldn't read the 3 threads there?
Click to expand...
Click to collapse
Yep, none of those threads have to do with "Root", but people are having discussions about root in the TWRP thread which is against forum rules because those are dev threads. But I guess the dev is either slacking or just letting it fly. Either way, thank you.
DesignGrits said:
Yep, none of those threads have to do with "Root", but people are having discussions about root in the TWRP thread which is against forum rules because those are dev threads. But I guess the dev is either slacking or just letting it fly. Either way, thank you.
Click to expand...
Click to collapse
Seriously?
I will quickly answer this, as this discussion is against the rules as it is not about the topic of this thread. It is lacking of respect towards the OP who is doing job for the community.
There are various conversations about rooting.
1. The TWRP with root included if you read the OP. People are discussing issues or trying to find solutions for their phones.
2. There is a specific thread saying CF Auto Root ...talks about rooting your devices with Chainfire's fabulous work only. Well mostly people saying thank you, as it is rare that Chainfire's work goes wrong.
I think the Mods on this forum are tough and correct... so if something was against the rules, they would of taken action.
Now this is a thread about volume and Viper... so nothing to do with this discussion... So let's go back on topic.
SAO said:
Seriously?
I will quickly answer this, as this discussion is against the rules as it is not about the topic of this thread. It is lacking of respect towards the OP who is doing job for the community.
There are various conversations about rooting.
1. The TWRP with root included if you read the OP. People are discussing issues or trying to find solutions for their phones.
2. There is a specific thread saying CF Auto Root ...talks about rooting your devices with Chainfire's fabulous work only. Well mostly people saying thank you, as it is rare that Chainfire's work goes wrong.
I think the Mods on this forum are tough and correct... so if something was against the rules, they would of taken action.
Now this is a thread about volume and Viper... so nothing to do with this discussion... So let's go back on topic.
Click to expand...
Click to collapse
okkkkkaaaaayyyy. the rom/recovery sections is meant for the developers to post updates on their progress or info about the rom/recovery/etc. This is why the mods continually tell people to not discuss in the rom section, and instead the dev should create a separate thread in the Q&A regarding any questions pertaining to the thread. Root is relevant to almost everything on XDA, so when someone says to go look in the rom section about root information, it's kind of vague to assume that information about "how to root" will be in the TWRP recovery section. My point was that simply telling a user to go to the rom section to find answers about rooting their phone is not ideal nor does it make sense, so let's all avoid confusing more and more people on this site.
DesignGrits said:
okkkkkaaaaayyyy. the rom/recovery sections is meant for the developers to post updates on their progress or info about the rom/recovery/etc. This is why the mods continually tell people to not discuss in the rom section, and instead the dev should create a separate thread in the Q&A regarding any questions pertaining to the thread. Root is relevant to almost everything on XDA, so when someone says to go look in the rom section about root information, it's kind of vague to assume that information about "how to root" will be in the TWRP recovery section. My point was that simply telling a user to go to the rom section to find answers about rooting their phone is not ideal nor does it make sense, so let's all avoid confusing more and more people on this site.
Click to expand...
Click to collapse
Me telling you to go to that section was perfectly valid and correct.
kajkac said:
S7 Headphone Volume Boost ¸¸♬·¯·♩¸¸♪·¯·♫
Hi , this is mod for S7 Edge Headphone boost.
U need to flash this under CWM
Flash Guide:
Supported model: Galaxy S7 / S7 Edge,(could work on other unlocked variants of S7)
1- Install TWRP v3 recovery
2- RootGalaxy S7 Edge with SuperSu in TWRP
3- Reboot recovery.
4- Flash S7_Volume_Boost_Headphone_V40.zip
5- Flash ViPER4Android-supolicy.zip
6- Install Viper4Android & install driver (zip attached is not for TWRP just extract it and install)
7- Put Viper4Android in Compability mode
8- Use Titanium Backup and disable Adapt Sound and Sound Alive
Enjoy!
That’s it. If you face any issues, i am not responsible )
These is just tested on the S7 EDGE, other variants use with caution.
Feel free to ask anything.
Click to expand...
Click to collapse
Sir,can i flash your mod with soundmod of divinebeats by royalseeker?Will it create any contradictions?
will this mod work whith The Sound Mod Thread by ZuBi182??
or will this cause problems?
samsamx said:
will this mod work whith The Sound Mod Thread by ZuBi182??
or will this cause problems?
Click to expand...
Click to collapse
No need to flash both mods at the same time as they are meant for the same purpose. Mod by ZuBi182 has more features and adjusted values.
Sent from my SM-G935F using XDA-Developers mobile app
Working but 10 second later turn normal mod
Why do you think's going on?
For example in youtube, 10 second viber4android active, later deactivate.
SM-G935F cihazımdan Tapatalk kullanılarak gönderildi
READ THIS!
Me, myself, and I do NOT own ANY OF THIS nor do I take credit for any of this amazing work. I am simply reposting with some updated information. I will leave links for EVERYTHING.
OKAY AGAIN, LISTEN UP. Flashing ANYTHING like this may void certain warranties; and I, Albinoman887, or anyone else is responsible for dead SD card, broken SIM's, or bricked phones, or anything bad that may result from this. You are SOLELY responsible and are doing this at YOUR own risk.
All credit goes to TeamDouche and all other coders who contributed to CyanogenMod.
These builds are for KLTE (GSM) and (CDMA) variants.
Included in the unified (GSM) build are: KLTEXX, KLTELRA, KLTEMO, KLTECAN, KLTEACG, KLTEDCM, and KLTE
*Individual CDMA builds: KLTESPR and KLTEUSC*
*Individual GSM buulds: KLTEDV*
So, if your device is not listed in one of the Individual lists (The ones marked with an asterisk) Then you should flash the "Unified GSM" (Or KLTE) build.
So here are the features,
Built from CM Source
Service
Text
Data
Calling
Audio
Wi-Fi
Google Now
Bluetooth*
GPS
MMS
Video Playback
Audio Playback
Internal SD Card mounting
External SD Card mounting
IR Blaster**
NFC
*There has been reported issues of Bluetooth stuttering and some random crashes. This is a known issue. Complaining about it will do absolutely nothing. With that information, do what you will.
**IR Blaster has been tested using the Peel IR Remote (Link: https://play.google.com/store/apps/details?id=tv.peel.app&hl=en
Please note, some CyanogenMod Features have NOT been added yet, so be patient and don't be annoying about this.
Some things you do NOT want to do when flashing this,
Do NOT use superwipes,
Do NOT dirty flash, (And if you do, do NOT report bugs), do a clean flash (Which is wiping Data, Cache, and Dalvik Cache)
Download links!
Latest tested release is cm-13.0-20151227
G900I (kltedv) : http://www.team-hydra.org/kltedv/rel/
G900P (kltespr) : http://www.team-hydra.org/kltespr/rel/
G900R4 (klteusc) : http://www.team-hydra.org/klteusc/rel/
G900V (kltevzw) : http://www.team-hydra.org/kltevzw/rel/
If your phone's specific model number was NOT listed above and is a CDMA device, it is sadly NOT supported, for all other GSM devices flash the "Unified GSM" Build below.
KLTE Build archive: http://www.team-hydra.org/klte/rel/
GApps Package: www.opengapps.com
FLASHING INSTRUCTIONS!
You must have TWRP Installled in order to flash this ROM! Others may work but have NOT been tested!
This is really quite simple if you do this step by step.
Step 1.
Download the build specific for your device and grab a GApps package.
Step 2.
Move these over to an SD Card
Step 3.
Wipe Data, Cache, and Dalvik Cache.
Step 3.
Flash the downloaded Cyanogenmod .zip folder
Step 4.
Wipe Cach and Dalvik Cache
Step 5.
Flash GApps package
Step 6.
Wipe Cache and Dalvik Cache
Step 7.
Reboot System!
And congrats! It should work! And you can brag to all of your dev friends and tell them you're running Android version 6.0.1 ( Although the S5 has Marshmallow for it already.. :/ )
Now, here I will talk about NIGHTLIES,
IF you want to be as up to date as possible, I recommend flashing the NIGHTLY builds. The only thing is they may have some bugs lurking around. Although, I use these and have had NO problems whatsoever.
Unified GSM (klte) : https://download.cyanogenmod.org/?device=klte
G900I (kltedv) : http://www.team-hydra.org/kltedv/nightly/
G900P (kltespr) : http://www.team-hydra.org/kltespr/nightly/
G900R4 (klteusc) : http://www.team-hydra.org/klteusc/nightly/\
Hey, have a heart and donate to Albinoman877!
He does a lot, show your support!
Here's the link to a PayPal you can donate to. (Note, the name on the account says Patricia as it is a family account)
https://www.paypal.com/us/cgi-bin/w...63663d3faee8d6625bf1e8bd269586d425cc639e26c6a
I will be happy to answer any questions but note that I am NOT a developer, so I'll only be able to answer SOME more basic or "noob" questions. For everything else, post on the original thread.
THE ORIGINAL THREAD WHERE ALL IF THIS IS FROM IS HERE:
http://forum.xda-developers.com/gal...ent/rom-cyanogenmod-13-0-android-6-0-t3237502
And why is this thread needed in the Development section?
The original CM13 thread has all the information and the magical "search" button.
Any noob should first go through the General and Q&A sections before arriving here.
Could an admin close this useless thread?
Thank you in advance.
AlexVat said:
And why is this thread needed in the Development section?
The original CM13 thread has all the information and the magical "search" button.
Any noob should first go through the General and Q&A sections before arriving here.
Could an admin close this useless thread?
Thank you in advance.
Click to expand...
Click to collapse
Its a more noob friendly version, as I myself have helped many noobs over on the original thread. Making this was am attempt to help them and get rid of noobish questions, as it gets repetitive and annoying.
On top of that, this has some updated information concerning GApps, bugs, and etc. as previously stated.
AlexVat said:
And why is this thread needed in the Development section?
The original CM13 thread has all the information and the magical "search" button.
Any noob should first go through the General and Q&A sections before arriving here.
Could an admin close this useless thread?
Thank you in advance.
Click to expand...
Click to collapse
As well as those reasons, I am also planning on compiling for smaller devices that aren't supported in the original thread.
The last Cyanogenmod has fingerprint working, so if this is build from official CM13 source it should be working too
TacoTank said:
As well as those reasons, I am also planning on compiling for smaller devices that aren't supported in the original thread.
Click to expand...
Click to collapse
Yeah, man, but still this shouldn't be posted in the Development section
Right now there is zero development on this thread. In the future I plan to cook a ROM myself but you don't see me raising threads in the Dev section. Just saying
AlexVat said:
Yeah, man, but still this shouldn't be posted in the Development section
Right now there is zero development on this thread. In the future I plan to cook a ROM myself but you don't see me raising threads in the Dev section. Just saying
Click to expand...
Click to collapse
Which section should I put this in then?
TacoTank said:
Which section should I put this in then?
Click to expand...
Click to collapse
In my opinion it should be in the General section as an ultra-noob walkthrough guide for installing CM13 from absolute scratch. With the links towards a compatible recovery, root, as well as all the risks involved (breaking knox, changed/lost imei etc.)
AlexVat said:
In my opinion it should be in the General section as an ultra-noob walkthrough guide for installing CM13 from absolute scratch. With the links towards a compatible recovery, root, as well as all the risks involved (breaking knox, changed/lost imei etc.)
Click to expand...
Click to collapse
Alright, can a mod move this thread over to the general section please? And sorry for any troubles man. Thanks.
In this version of CM are we able to move apps, backups, TWRP files to the external SD card?