Hello, recently I took my z3, after changing display. I noticed that backpanell is not putted 100% right, when you are looking it from profile example, when you are looking the main on/off button), it jumps out from a little... I know that panel is glued, but with the heating i have on my z3, should I be worried, that with time, glue will be a little loosed and panel will jump out completely??
Well I know one, waterprofing is gone baby, its gone.... :crying:
mine also replaced the display and now both front and back glasses are not 100% closed
i usually never put it in to the water but my main worry is will it further detach ?
what can I do to prevent it ?
applying some glue?
milindasenarath said:
mine also replaced the display and now both front and back glasses are not 100% closed
i usually never put it in to the water but my main worry is will it further detach ?
what can I do to prevent it ?
applying some glue?
Click to expand...
Click to collapse
I thin, this regular "house" glue, will not help, and after some time, it will loose. Maybe, if you( and me) in the future, see that panel is getting more unglued, we go to service, and just ask to disassemble device, and properly glue it!
this was my first thought, when i saw my panel..
wrigduo said:
I thin, this regular "house" glue, will not help, and after some time, it will loose. Maybe, if you( and me) in the future, see that panel is getting more unglued, we go to service, and just ask to disassemble device, and properly glue it!
this was my first thought, when i saw my panel..
Click to expand...
Click to collapse
I had the same issue.....twice....first they gave me a new Z3 since it was under warranty. Now I dont have any warranty and my screen is coming off again And Xperia screen replacement is really expensive.
Get this: http://www.amazon.com/Sony-Xperia-Z...00WJ9MFBM/ref=cm_cr_arp_d_product_top?ie=UTF8
Heat the back panel with a hair dryer, put a small suction cup near the top, next to the camera and pull. Back panel will come off. It can bend. Replace the adheseive and put it back on!
krugm0f0 said:
Get this: http://www.amazon.com/Sony-Xperia-Z...00WJ9MFBM/ref=cm_cr_arp_d_product_top?ie=UTF8
Heat the back panel with a hair dryer, put a small suction cup near the top, next to the camera and pull. Back panel will come off. It can bend. Replace the adheseive and put it back on!
Click to expand...
Click to collapse
Just replaced battery and Minijack on my trusty ol' pal. Will see how the seal holds up.
Sent from my D6603 using XDA-Developers mobile app
---------- Post added at 10:24 PM ---------- Previous post was at 10:24 PM ----------
krugm0f0 said:
Get this: http://www.amazon.com/Sony-Xperia-Z...00WJ9MFBM/ref=cm_cr_arp_d_product_top?ie=UTF8
Heat the back panel with a hair dryer, put a small suction cup near the top, next to the camera and pull. Back panel will come off. It can bend. Replace the adheseive and put it back on!
Click to expand...
Click to collapse
Just replaced battery and Minijack on my trusty ol' pal. Will see how the seal holds up.
Sent from my D6603 using XDA-Developers mobile app
Sindroid said:
Just replaced battery and Minijack on my trusty ol' pal. Will see how the seal holds up.
Click to expand...
Click to collapse
Where did you get your battery?
I'm looking for an original OEM battery and do not want a fake!
Any tips are greatly appreciated!
Brainpower said:
Where did you get your battery?
I'm looking for an original OEM battery and do not want a fake!
Any tips are greatly appreciated!
Click to expand...
Click to collapse
I live in Norway and ordered it from www.mytrendyphone.no. (I think its a Danish company) Package came from Denmark but is no doubt the battery was OEM. No derivations from the old one, spot on similar, wrapping and description, flexcable was top notch too. The new sealing tape was also good, great adhesive ability so far. Must be ordered separatly from the site.
currently on my first cycle so need to charge it a few times for it to settle, but darn tootin its already back to long batterylife already straight out of the box.
I could possibly fix a new battery for you if Norwegian language aint good [emoji1]. Im sure Google translate will help you well on that issue. Otherwise I can work as a middle man for you.
Sent from my D6603 using XDA-Developers mobile app
Sindroid said:
I live in Norway and ordered it from www.mytrendyphone.no. (I think its a Danish company) Package came from Denmark but is no doubt the battery was OEM. No derivations from the old one, spot on similar, wrapping and description, flexcable was top notch too. The new sealing tape was also good, great adhesive ability so far. Must be ordered separatly from the site.
currently on my first cycle so need to charge it a few times for it to settle, but darn tootin its already back to long batterylife already straight out of the box.
I could possibly fix a new battery for you if Norwegian language aint good [emoji1]. Im sure Google translate will help you well on that issue. Otherwise I can work as a middle man for you.
Sent from my D6603 using XDA-Developers mobile app
Click to expand...
Click to collapse
Thank for this site! They have an english .EU site!
I'm impressed, it is a really great site! large catalog and great prices!
Many thanks, I'm ordering right now!
Related
Hi
I have damaged the metallic black bezel around the screen at a few places (especially the part above the micro usb port). I guess it is called Faceplate.
What I wanted to know is if I can replace this part somehow. If I look at the region under the screen after opening the slider, it appears as if it can come off.
If it is possible to replace it, does anyone know where can I buy one of these?? I have googled but could not find anything.
I have found only a full cover. Try searching milestone 2 housing on eBay.
Or here is the link:
http://www.ebay.de/itm/Cover-Housing-for-Motorola-A955-Droid-2-Milestone-A-955-/300572186204
---UFO--- said:
I have found only a full cover. Try searching milestone 2 housing on eBay.
Or here is the link:
http://www.ebay.de/itm/Cover-Housing-for-Motorola-A955-Droid-2-Milestone-A-955-/300572186204
Click to expand...
Click to collapse
Thanks dude. Now I have to find someone who can deliver it to India. BTW are you sure Droid 2 is physically exactly same as Milestone 2. They do appear same. Just wanted to know if someone has used this cover etc. Plus anything on the quality??
sahilarora911 said:
Thanks dude. Now I have to find someone who can deliver it to India. BTW are you sure Droid 2 is physically exactly same as Milestone 2. They do appear same. Just wanted to know if someone has used this cover etc. Plus anything on the quality??
Click to expand...
Click to collapse
I've ordered one from the link above and I should receive it in the next 7-14 days so I'll let you know how I go but I'm 100% confident that the physical housing between the MS2 and D2 are identical.
I have received the housing (from the eBay link above) and fitted it last night. The case is a Verizon stamped unit and is 100% perfect, next time I think I'll just live with the worn look. Very fiddly job but does give you an appreciation of the engineering ... They use a lot of adhesive, pita.
Well I have managed to knick the display input cable and now have a one centimetre row smack in the middle of the screen that won't respond to touch. My fault, I thought I'd taken care to ensure no damage to some of these fragile cables but alas no
So, just ordered a SGII Stick that where the sun doesn't shine Motorola! Yeah, I know you couldn't care less but I feel better
Well thanks for the info. I won't have the luxury of buying a new one if I ruin my MS2 so I guess I'll stick with a little wear and tear. BTW nice buy!!
Or just take it to your nearest phone repair shop and they'll sort it out. =D
MegaBubbletea said:
Or just take it to your nearest phone repair shop and they'll sort it out. =D
Click to expand...
Click to collapse
Funny bugga, this is BrisVegas!
nurofenplus said:
Funny bugga, this is BrisVegas!
Click to expand...
Click to collapse
Haha true
Sent from my MotoA953 using xda premium
nurofenplus said:
I have received the housing (from the eBay link above) and fitted it last night. The case is a Verizon stamped unit and is 100% perfect, next time I think I'll just live with the worn look. Very fiddly job but does give you an appreciation of the engineering ... They use a lot of adhesive, pita.
Click to expand...
Click to collapse
How does the housing attach to the digitizer/glass? Because the tutorial I found on iFixit didn't detach the digitizer from the housing.
My housing cracked badly, I "fixed" a corner with superglue, but I think it permeated through the digitizer, so there's a strip in the left side (the one with the MENU button) which is insensitive. Another drop and the whole top part fell off and I don't intend to glue this one. Probably I'll buy a new front panel and a new digitizer, but I need to know if I'll be able to attach them at home or if I'll need some adhesive (yuck).
Thanks in advance! :fingers-crossed:
Hey guys, so i dropped my phone a couple of times which ended up in a smashed screen/lcd. i bought a replacement from eBay and installed it. it powered on fine, but the bottom quarter of the screen is very unresponsive and unreliable, the bottom row of buttons have no life in them whatsoever. the top half is fine. the lcd isn't sitting quite flush in the casing, although having a play around with it i couldn't solve the problem. has anyone been through the same situation and would care to shed some light?
Many thanks
I should also add, i didn't use any more adhesive, i thought the bit of leftoverstuff might of held it. could this possibly be what it is? do i need loads of adhesive to pad it out? is it avaliable on the high street or is it internet only?
anyone?
R-ch said:
anyone?
Click to expand...
Click to collapse
Sorry mate - I missed this post first time around. I have also replaced both my LCD and my Digitiser before now. You really need to do the replacement properly - when the adhesive is heated up so that you can separate the two parts you should remove as much of the old adhesive as you possibly can and then replace it with new stuff correctly and accurately. If the two part are touching then that may cause you a problem - although it may not.
You could have any of three real causes for this;-
1) The new digitiser cable isn't inserted correctly or is damaged somehow
2) The misuse of adhesive
3) The digitiser you bought might be cheap and sub-standard
SimonTS said:
Sorry mate - I missed this post first time around. I have also replaced both my LCD and my Digitiser before now. You really need to do the replacement properly - when the adhesive is heated up so that you can separate the two parts you should remove as much of the old adhesive as you possibly can and then replace it with new stuff correctly and accurately. If the two part are touching then that may cause you a problem - although it may not.
You could have any of three real causes for this;-
1) The new digitiser cable isn't inserted correctly or is damaged somehow
2) The misuse of adhesive
3) The digitiser you bought might be cheap and sub-standard
Click to expand...
Click to collapse
Cheers for the reply Simon!
i think theres next to no adhesive on there at the minute. Could you link me to the stuff i need? im clueless!
thanks again.
R-ch said:
Cheers for the reply Simon!
i think theres next to no adhesive on there at the minute. Could you link me to the stuff i need? im clueless!
thanks again.
Click to expand...
Click to collapse
I bought mine from Amazon I think - but it only comes on rolls of about 50 metres. Are you in the UK by any chance?
Yep - got mine here £4.99 + £4.50 delivery. I hardly used any and posted my roll on recently to another XDA member who needed some.
SimonTS said:
I bought mine from Amazon I think - but it only comes on rolls of about 50 metres. Are you in the UK by any chance?
Yep - got mine £4.99 + £4.50 delivery. I hardly used any and posted my roll on recently to another XDA member who needed some.
Click to expand...
Click to collapse
Thanks for the link dude. I am in the UK yes,
So once i have this tape.. i have no clue where to apply it :S any ideas?
thanks again
R-ch said:
Thanks for the link dude. I am in the UK yes,
So once i have this tape.. i have no clue where to apply it :S any ideas?
thanks again
Click to expand...
Click to collapse
All round the very edge where the old stuff was. Search YouTube for "HTC Desire S teardown" and you should find the video I followed.
try to replace digitiser
SEmp91 said:
try to replace digitiser
Click to expand...
Click to collapse
Yeah i bought the digitizer and lcd together.
So i tried applying adhesive, had a nightmare with rounded screws/drivers but eventually got it back together. now it's charging and won't turn on.. still isn't sitting right, may give up unless there's someone out there that would fix it for <£20? i've got all the bits (probably will need new screws) just don't have the know-how.
I can't promise a miracle, but if you want to post it for me to have a look at then drop me a PM.
Do you feel pressing power-on key?
Sorry, i can`t help by my hands, i probably too away from you)
SimonTS said:
I can't promise a miracle, but if you want to post it for me to have a look at then drop me a PM.
Click to expand...
Click to collapse
Pm'd.
I recently bought a Note 3 N9005. The Phone is awesome and have been functioning very well, except the Battery drain when playing games on it but I can live with that.
Couple of days back the phone accidentally slipped from my Hand and fell on the Ground . When i picked it up the upper right corner of the phone was chipped and i saw that the Metallic Looking rim for Note 3 is not actually metal but Metal like looking plastic . Now i am left with a Amazing phone with a very sore look. Every time i look at the phone i first look at that chip which makes me very upset
Can anyone please let me know is there any way I can replace the Metal Rim? Is the Metal Rim attached to the LCD Screen? Will I be able to purchase the Metal Rim and replace it with mine?
Pleaseee let me know as that chipped part on my phone is bothering me very much and I have searched the Internet for answers but did not find any. I hope to find them here.
Thanks in Advance.
I don't know about replacing the original part, but a surely cheaper and easier way would be to buy and use a metal bumper. Cheap, easy to install, real metal. There were some threads about it in the Note 3 Accessories subforum.
The plasic metal looking rim is part of the screen's frame, you can only replace it if you replace the whole screen.
So i think it's best if you leave it like that or you must have a pretty big wallet you want to empt, new screen is like $250 a least.
I dont know how hardcore technicians live in ur part of the world but there in Poland replacing S4 frame is pretty much doable so its possible also with note3. Price should be under $100.
Thanks for the response guys...I was hoping to hear a different answer guess i just have to live with that or change to another phone. Thanks for the help. btw i am from India.
What timing! I've only just chipped the frame aswell?. I've maybe dropped my phone 5 times(3 on tile & 2 on lino) and luckly each time, it has fallen screen up.
TBH replacing the whole frame was my last consideration. At first I wanted to paint it, but now I'm just going to get a cover. I'll post a pic of the chip when I get the time. Mine's on the Faux metal rim and not the glass. How bad is yours? Maybe post a pic?
In the end it doesn't matter how little it is, it still drives you nuts?. Take a look at the accessories thread and you'll see most, if not all, of the cases cover the rim around the front. This is would be the easiest solution in my mind.
Sent from my SM-N9005 using Tapatalk
denski101 said:
What timing! I've only just chipped the frame aswell?. I've maybe dropped my phone 5 times(3 on tile & 2 on lino) and luckly each time, it has fallen screen up.
TBH replacing the whole frame was my last consideration. At first I wanted to paint it, but now I'm just going to get a cover. I'll post a pic of the chip when I get the time. Mine's on the Faux metal rim and not the glass. How bad is yours? Maybe post a pic?
In the end it doesn't matter how little it is, it still drives you nuts?. Take a look at the accessories thread and you'll see most, if not all, of the cases cover the rim around the front. This is would be the easiest solution in my mind.
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
Yeah, i think i will have to consider the Metal bumper for now to cover up that Chip. its driving me crazy every time i look at my phone. yes, I have used iPhone 4 in the past and i have dropped it several times but had no visible scratches on the phone. But I dropped my Note3 once and Boom!! Scar for life :crying: attaching the picture...
In your situation I would mask the screen very accurately at that corner use epoxy glue to build the missing area up (as epoxy dries it can be shaped & cut to shape with a razor blade) finalise the shape BEFORE its fully cured then allow to cure for a day then paint with cosmetic nail paint close to chrome as you can.
Sent from my SM-N9005 using xda app-developers app
I would just do what Pat. said.
NazzyJ said:
Yeah, i think i will have to consider the Metal bumper for now to cover up that Chip. its driving me crazy every time i look at my phone. yes, I have used iPhone 4 in the past and i have dropped it several times but had no visible scratches on the phone. But I dropped my Note3 once and Boom!! Scar for life :crying: attaching the picture...
Click to expand...
Click to collapse
Arghhhh!!? Not to add insult to injury, but that is a shocker. You need a case ASAP! I feel embarrassed complaining about mine. Here's my damage report:
Sent from my SM-N9005 using Tapatalk
denski101 said:
Arghhhh!!? Not to add insult to injury, but that is a shocker. You need a case ASAP! I feel embarrassed complaining about mine. Here's my damage report:
Click to expand...
Click to collapse
I was using a S-View Cover when the phone fell...I thought my phone should be safe but when i picked it up I saw the top right end of the phone was chipped. Threw the S-View Cover away, Will be buying some nice Cases/ bumpers for the phone this weekend.
Pat. said:
In your situation I would mask the screen very accurately at that corner use epoxy glue to build the missing area up (as epoxy dries it can be shaped & cut to shape with a razor blade) finalise the shape BEFORE its fully cured then allow to cure for a day then paint with cosmetic nail paint close to chrome as you can.
Sent from my SM-N9005 using xda app-developers app
Click to expand...
Click to collapse
Thanks Pat, I will try it this weekend and will update it here. Hopefully everything goes well maybe i'll attach some pictures as well.
Don't forget to mask the rest of the phone while doing it as Epoxy can easily get on things I've noticed & is very hard to remove.
I put a larger than needed blob on & then don't start cutting to shape until it's the consistency of toffee.
Use the the blade in a sawing action.
Good luck.
Sent from my SM-N9005 using xda app-developers app
Pat. said:
Don't forget to mask the rest of the phone while doing it as Epoxy can easily get on things I've noticed & is very hard to remove.
I put a larger than needed blob on & then don't start cutting to shape until it's the consistency of toffee.
Use the the blade in a sawing action.
Good luck.
Sent from my SM-N9005 using xda app-developers app
Click to expand...
Click to collapse
How much time should I give it until i cut it into shape? Thanks Again.
It is an expensive device so because different makes/types of glue dry at different speeds the trick is to do a test run with the glue in the same environment as you will be doing the repair & monitor/time the glue to see how long the "window" for manipulation of it.
Araldite is good & for a rough idea it may be from about 20mins after applying to an hour. But do a test run. (Buy good glue, i tried some pound shop epoxy last year & it was worse than useless).
Sent from my SM-N9005 using xda app-developers app
hi, this morning the metal has just fallen off of the flap on the charging port . is there a fix like can i just click it back on or anything i really dont wanna send it back to sony itll take a week and ill be left with no phone, also there are no parts on UK ebay and the only parts are from hong kong. can anyone help?
Can you explain a bit better? I'm not sure what you mean by the metal fell off... Your phone is under warranty and Sony will fix it. You just need to send it to them, it's free to send...
Sent from my D6603 using XDA Free mobile app
Well you see the charging port it has a flap right ? Well the flap is still on bit the metal cosmetic bit fell off
cdunn700 said:
Well you see the charging port it has a flap right ? Well the flap is still on bit the metal cosmetic bit fell off
Click to expand...
Click to collapse
You're sure it's metal?
Why do you have to be petty? Whatever material it is its fallen off
cdunn700 said:
Why do you have to be petty? Whatever material it is its fallen off
Click to expand...
Click to collapse
Amusing. You try and help people, despite their spelling mistakes and confusing and inaccurate descriptions, and you get attitude! Good luck getting help around here.
**** it . You was trying to be a smartass and you was not trying to help the slightest. Good luck being a asshole.
poldie said:
Amusing. You try and help people, despite their spelling mistakes and confusing and inaccurate descriptions, and you get attitude! Good luck getting help around here.
Click to expand...
Click to collapse
The phone is metal, and so are the flaps.
I'm sure you can buy the flaps from a supplier somewhere, but it's a new phone and that is definitely covered under warranty.
Just go to www.sonymobile.com choose country and your model and then go to contact us. Choose chat support and explain to an agent. They will arrange for the phone to be repaired.
It takes about a week - that is the worst part.
Sent from my D6603 using XDA Free mobile app
Or less you want to return it to Sony I would buy a new flap off the Internet. Or maybe you could glue the metal back on.
Thanks,i just decided ill speak to amazon about it as i did buy the phone from there and they are sending the replacement to me straight away they said it would arrive tomorrow.so a better resolve than not having my phone for a week couldnt live without it tbh with work etc
Mine came with a spare in the box?
xxquicksh0txx said:
Mine came with a spare in the box?
Click to expand...
Click to collapse
Mine also had a spare in the box.
I've actually got a couple of them, as I kept them when I had to return my phone....
cdunn700 said:
hi, this morning the metal has just fallen off of the flap on the charging port . is there a fix like can i just click it back on or anything i really dont wanna send it back to sony itll take a week and ill be left with no phone, also there are no parts on UK ebay and the only parts are from hong kong. can anyone help?
Click to expand...
Click to collapse
There should be a spare in the box the phone came in.
nbell13 said:
There should be a spare in the box the phone came in.
Click to expand...
Click to collapse
Hi my box didnt come with me
That's odd, where did you buy? I thought every unit came with a spare. Even the TMO version I have came with it. If anyone does cost cutting its usually with the carrier versions like with no headphones etc.
Its $5.99 on eBay comes with the other cover as well. Free shipping.
Black
http://www.ebay.com/itm/Sim-Card-Sl...e_Replacement_Parts_Tools&hash=item4d267de979
Silver
http://www.ebay.com/itm/Sim-Card-Sl...e_Replacement_Parts_Tools&hash=item51c57f9668
It says i bought it directly from amazon s.a.r.l and this is the unlocked uk model. So im surprised you had a replacement wouldnt think they would
Here's a link and here like the Mate is broken.
thanks for the link !
but it is too slow... is there a way to get it on youtube ?
Unfortunately, it can not be completely record. On the PC, it can, however, look reasonable.
I have just made a little damage (i'm angry against myself).
You can see the damaged part on the picture (the display is completely OK, because there is a tempered glass for protection on it, and all the rest is OK)
Do you think i can order the golden metal part that "circle" the display ?
Spare parts I have not found. However, it must be removed in any case the display. Whether it survives that !?Because I would rather put on a cover.
There is a cover (i removed it for the picture)...
The phone falls from my pocket on the ground... a fall about 1m40...
when the phone touched the ground, the back cover protector moved and one of the corner was damaged just there... it's 3x nothing, but i'm pissed... (i'm a bit maniac )
If only watch better. But is very smooth without cover.
deathknight said:
I have just made a little damage (i'm angry against myself).
You can see the damaged part on the picture (the display is completely OK, because there is a tempered glass for protection on it, and all the rest is OK)
Do you think i can order the golden metal part that "circle" the display ?
Click to expand...
Click to collapse
No chance for such latest phone..
I found lcd parts and glass only
And gold that prob. never..
http://www.ebay.co.uk/sch/Replaceme...from=R40&_nkw=ascend+mate7&rt=nc&LH_PrefLoc=2
Simona Simmy said:
No chance for such latest phone..
I found lcd parts and glass only
And gold that prob. never..
http://www.ebay.co.uk/sch/Replaceme...from=R40&_nkw=ascend+mate7&rt=nc&LH_PrefLoc=2
Click to expand...
Click to collapse
Thanks for your answer...
But this does not include my damaged part.
I think i'll be forced to order this:
http://www.aliexpress.com/store/pro...Mate7-White-and-gold/1037064_32247803358.html
deathknight said:
Thanks for your answer...
But this does not include my damaged part.
I think i'll be forced to order this:
http://www.aliexpress.com/store/pro...Mate7-White-and-gold/1037064_32247803358.html
Click to expand...
Click to collapse
omg .. expensive ..
is it worth buying ..
u have little scrath there .. buy case and it will be hidden ..
deathknight said:
Thanks for your answer...
But this does not include my damaged part.
I think i'll be forced to order this:
http://www.aliexpress.com/store/pro...Mate7-White-and-gold/1037064_32247803358.html
Click to expand...
Click to collapse
Is definitely the right one frame is. If you sold the old one still at a good price, the cost to be limited.
Fooox1 said:
Is definitely the right one frame is. If you sold the old one still at a good price, the cost to be limited.
Click to expand...
Click to collapse
I just shattered the screen on mine, has anyone taken on apart yet?
Rear cover removal looks easy enough for basic access & a battery refresh but screen work looks less easy & would be hard for average person do a faultless or worthwhile repair job.
Does anyone no how to remove the rear casing (battery door)? I have scratched mine and noticed you can buy the part pretty cheap but noing how this comes if would be much appreciated.
Sent from my HUAWEI MT7-TL10 using XDA Free mobile app