I have a note 5 but i don't remember my Google password to get passed the frp verification i tried wroth a otg but when i plug it in the phone it doesn't show that the drive is plugged in and i can't figure out why any help or any other suggestions on bypassing the Google verification thanks
bigfnfil said:
I have a note 5 but i don't remember my Google password to get passed the frp verification i tried wroth a otg but when i plug it in the phone it doesn't show that the drive is plugged in and i can't figure out why any help or any other suggestions on bypassing the Google verification thanks
Click to expand...
Click to collapse
Are you even able to get on the phone at all?
Yeah until i reach the Google verification
Sent from my SAMSUNG-SM-G900A using Tapatalk
bigfnfil said:
Yeah until i reach the Google verification
Sent from my SAMSUNG-SM-G900A using Tapatalk
Click to expand...
Click to collapse
Can you skip it in order to get into the phone settings? What rom are you on?
No i cant figure out a way to skip anything and I believe it's just the stock ROM I'm not sure how to check it since I can't get to the settings on the device information
bigfnfil said:
No i cant figure out a way to skip anything and I believe it's just the stock ROM I'm not sure how to check it since I can't get to the settings on the device information
Click to expand...
Click to collapse
If you can't get to the settings you're going to have to flash another rom and you can figure out what you're on by powering off the phone and then holding the volume down button the home button and then press and hold the power button until it turns on then press the volume up button and you'll be able to read information about the phone right there and that's also download mode so you can use Odin on a Windows computer to flash another stock rom.
6.0.1/mmb29k/n920tuvu2dpd1
Well, you can find out what rom you are on by booting into recovery. It will say the rom in the top left hand corner. As for your otg issue, it sounds like the cable you are using is not compatible with your phone. I just went thru the same thing with my daugther's galaxy s6 edge plus this past weekend. Where did you get the cable from? HAve you tried it out on another android phone(doesnt have to be frp, any newer galaxy should work). If not i suggest getting a different otg cable or try this method:
https://www.youtube.com/watch?v=S2Nv0w6T0gk
I tried the cable on my Galaxy 5 and it worked on that and I've tried to SideSync and it won't connect it shows on my PC that it the device is connected but it just says starting SideSync you said I would need to install a new ROM would you happen to have the link and let me know how to do it I would appreciate that
Sent from my SAMSUNG-SM-G900A using Tapatalk
Related
I am completely stumped. My wife's phone quit working today. It won't turn off without pulling the battery, if the screen times out you can't turn it back on without plugging it in.
I did a factory reset, same problem. I was going to try to root it and install a new ROM and kernel, but when I boot into fastboot the phone is not recognized on my computer (fastboot devices doesn't list anything) and the volume buttons are not responsive at all in the fastboot menu. I plugged my phone into the computer (another nexus s) and it is listed when I type fastboot devices so it is the phone, not a driver problem, etc.
I am out of ideas here. I have essentially a bricked stock Nexus S and a working CM7 Nexus S. Is there anything I can do or is this an issue I have to deal with samsung warranty?
Gonna have to put it in "download mode"(HOLD both volume buttons and PRESS power button)
Then.....
If its a Sprint CDMA version use SWUpdater: http://forum.xda-developers.com/showthread.php?t=1072698
If its a gsm, use odin and the correct firmware for your model
snandlal said:
Gonna have to put it in "download mode"(HOLD both volume buttons and PRESS power button)
Then.....
If its a Sprint CDMA version use SWUpdater: http://forum.xda-developers.com/showthread.php?t=1072698
If its a gsm, use odin and the correct firmware for your model
Click to expand...
Click to collapse
It's the original tmobile one. Any idea where I can get Odin and the correct firmware?
Also I have tried to get into download mode, but can't.
I am running out of ideas... At this point I am really starting to think it is a hardware issue
chrlswltrs said:
It's the original tmobile one. Any idea where I can get Odin and the correct firmware?
Also I have tried to get into download mode, but can't.
I am running out of ideas... At this point I am really starting to think it is a hardware issue
Click to expand...
Click to collapse
Take it for repair then
snandlal said:
Take it for repair then
Click to expand...
Click to collapse
Yeah I have to call samsung tomorrow, not looking forward to that process
Sent from my Nexus S using xda premium
Sorry to hear it. Hope they take care of you asap
snandlal said:
Sorry to hear it. Hope they take care of you asap
Click to expand...
Click to collapse
I do to. At least my daughter doesn't need a phone (she is only 9) so my wife can use her MT4G for a few days until we get a replacement NS. Just hope it doesn't turn into a bigger hastle than it needs to be.
chrlswltrs said:
I do to. At least my daughter doesn't need a phone (she is only 9) so my wife can use her MT4G for a few days until we get a replacement NS. Just hope it doesn't turn into a bigger hastle than it needs to be.
Click to expand...
Click to collapse
sad that you got a bad NS! ,but please use the correct section to post !
Sent from my Google Nexus S using xda premium
1 pull the battery
2 replace battery
3 hold volume up and down at the same time
4 plug into a usb cable connected to your pc while holding the volume + and -
now you have download mode
Hi all,
My Samsung Galaxy phone is stuck on the Samsung boot up logo. I shut off the phone and it starts up again to the Samsung logo again. I am rooted but still had the stock rom and kernel.
I went to selections and wiped my cache and tried to format it like a new phone. The same thing still happens. I am not sure what else to do. Anyone know how to fix this?
Keep the instructions simple please, if you do know. (I'm a desperate noob)
Thanks for any help.
IF you ever did nandroid than just restore that otherwise.........
Hey first follow this steps to flash any rom. If you flash the rom properly than you can use any stock rom from dev section and use that.
OR
follow this step to go back to stock and it will unroot you.
Vman7765 said:
Hi all,
My Samsung Galaxy phone is stuck on the Samsung boot up logo. I shut off the phone and it starts up again to the Samsung logo again. I am rooted but still had the stock rom and kernel.
I went to selections and wiped my cache and tried to format it like a new phone. The same thing still happens. I am not sure what else to do. Anyone know how to fix this?
Keep the instructions simple please, if you do know. (I'm a desperate noob)
Thanks for any help.
Click to expand...
Click to collapse
Great, I'm downloading the drivers now. My phone was working perfectly. Do you know what may have caused this? Thanks.
I am not sure why it happened but it looks like u cleared cache so that might be the problem. IDK
Vman7765 said:
Great, I'm downloading the drivers now. My phone was working perfectly. Do you know what may have caused this? Thanks.
Click to expand...
Click to collapse
Rocketing on Sky Ics¡
I'm back up and running. If I want to change my rom and kernel, what do you recommend? I midas well do everything now, while I am on work mode. Thanks for your help.
first of all to show that you appreciate my help please hit that thnx button. I am running Sky Ice Rom which is deeply themed rom with faux123's kernel.
Vman7765 said:
I'm back up and running. If I want to change my rom and kernel, what do you recommend? I midas well do everything now, while I am on work mode. Thanks for your help.
Click to expand...
Click to collapse
NP thanks for your help. I spammed that button as much as I could lol.
Same Problem
My problem is that my Rogers SGSII LTE I727R, is stuck on the logo screen, which is flashing the boot screen. When I connect the USB (even after install of Kies and Odin), my PC does not see the device. I am really not sure what to do. I think I set the wrong phone ID when I installed recovery (I think I was supposed to use the T-Mobil SGSII setting), but I selected something else. I then tried to backup the existing ROM, and am now in this unending loop. Does anyone have any suggestions? Thanks.
Follow these steps it will help you go back to stock. ANd reroot your phone.
Barlaw604 said:
My problem is that my Rogers SGSII LTE I727R, is stuck on the logo screen, which is flashing the boot screen. When I connect the USB (even after install of Kies and Odin), my PC does not see the device. I am really not sure what to do. I think I set the wrong phone ID when I installed recovery (I think I was supposed to use the T-Mobil SGSII setting), but I selected something else. I then tried to backup the existing ROM, and am now in this unending loop. Does anyone have any suggestions? Thanks.
Click to expand...
Click to collapse
I did try the main process, but the problem seems to be that the my PC/Odin, don't see my phone. The USB drivers are installed, and I have the stock rom, but I can't seem to make the connection.
Barlaw604 said:
I did try the main process, but the problem seems to be that the my PC/Odin, don't see my phone. The USB drivers are installed, and I have the stock rom, but I can't seem to make the connection.
Click to expand...
Click to collapse
Try a different USB port. Avoid rear ports and hubs.
OK, i will try that on a different computer, as I have tried all of the available ports on my laptop. Any other thoughts?
Barlaw604 said:
I did try the main process, but the problem seems to be that the my PC/Odin, don't see my phone. The USB drivers are installed, and I have the stock rom, but I can't seem to make the connection.
Click to expand...
Click to collapse
Have you uninstalled kies? If not uninstall it from your PC. Put your phone in download mode and see if Odin can see the phone.
Sent from my SAMSUNG-SGH-I727 using xda premium
Barlaw604 said:
I did try the main process, but the problem seems to be that the my PC/Odin, don't see my phone. The USB drivers are installed, and I have the stock rom, but I can't seem to make the connection.
Click to expand...
Click to collapse
Try another USB port or another computer. If you can get the logo you are in a boot loop, the most common form of a soft brick. If you can get into download mode you should be able to fix it.
---------- Post added at 04:55 PM ---------- Previous post was at 04:46 PM ----------
Barlaw604 said:
OK, i will try that on a different computer, as I have tried all of the available ports on my laptop. Any other thoughts?
Click to expand...
Click to collapse
Just saw this. Have you tried to re-install the drivers?
Another thought is to try turning off firewall and antivirus when using Odin. I've never had my firewall or antivirus block Odin but I've heard it can happen...
Can you get into download mode? Hold the two volume buttons down, then plug the usb cable into your phone, then you should be in download mode.
I cannot get into download mode. I just keep getting the flashing boot screen, with the corresponding vibration.
mimart7 said:
Can you get into download mode? Hold the two volume buttons down, then plug the usb cable into your phone, then you should be in download mode.
Click to expand...
Click to collapse
What he said. Pull the battery and put it back in. Hold volume up/down and plug in USB. Continue holding volume buttons until you see download mode. Careful not to press the power button during this process.
Sent from my SAMSUNG-SGH-I727 using xda premium
I like how u guys are really trying to help him. Let u guys know that on my first responce I gave him all the steps on how to go back to stock. So if he followed that and nothing happened than he should try USB jig if that don't work than its hard brick!!
Rocketing on Sky Ics¡
Barlaw604 said:
I cannot get into download mode. I just keep getting the flashing boot screen, with the corresponding vibration.
Click to expand...
Click to collapse
Don't panic. If you're in a boot loop it's fixable. It's when you get nothing that you need to worry about a hard brick.
Try the button combo mentioned above to get into download mode. If that doesn't work, pull the battery again and try using just the volume down button button--I've heard people say this worked for them when they had a hard time.
If this doesn't get you into download mode, I guarantee you that a jig will work. You can buy one online or make one yourself for about 75 cents and a cut-up data cable (I had a car charger that I didn't need--car charges the phone through USB port, so I cut that one up). Always good to have a jig, at any rate...
skrambled said:
Don't panic. If you're in a boot loop it's fixable. It's when you get nothing that you need to worry about a hard brick.
Try the button combo mentioned above to get into download mode. If that doesn't work, pull the battery again and try using just the volume down button button--I've heard people say this worked for them when they had a hard time.
If this doesn't get you into download mode, I guarantee you that a jig will work. You can buy one online or make one yourself for about 75 cents and a cut-up data cable (I had a car charger that I didn't need--car charges the phone through USB port, so I cut that one up). Always good to have a jig, at any rate...
Click to expand...
Click to collapse
Yup, when I rooted my phone, the only way I could get it into download was volume DOWN & power.
Sent from my SGH-I727R using xda premium
I require help....
How to unbrick my Galaxy Ace Duos? i cannot go into download or recovery mode. its just a blank black screen.
I cannot go into download or recovery mode. Its just a blank black screen? - I rooted my galaxy ace duos then flash cwm. Then reboot the device till then everything went blank. I cannot get it into recovery mode at all. I have tried the all 3 buttons methos but no luck. Please help ::
Maulin
rawalmaulin said:
... I cannot go into download or recovery mode ...
Click to expand...
Click to collapse
If you can't enter download or recovery.. bad thing
I dont think that's possible.
Take out the battery, put it back in, hold the vol down and plug in the phone?
Can anyone provide odin downloader link so I can do something with it? I have several times try to start the phone but its not starting at all. No logo or no vibration or just nothing. I am lot worried and trying everything. Can't understand what has happened? Earlier I was using Galaxy Y and have perform all this things in it for several times but can't understand what is happening in this phone. Its a new model so no help or nothing available even here at XDA-forums...
Please anyone can help me out..
kobekoy said:
I dont think that's possible.
Click to expand...
Click to collapse
orangekid said:
Take out the battery, put it back in, hold the vol down and plug in the phone?
Click to expand...
Click to collapse
I have several times try to start the phone but its not starting at all. No logo or no vibration or just nothing. I am lot worried and trying everything. Can't understand what has happened? Earlier I was using Galaxy Y and have perform all this things in it for several times but can't understand what is happening in this phone. Its a new model so no help or nothing available even here at XDA-forums...
orangekid said:
Take out the battery, put it back in, hold the vol down and plug in the phone?
Click to expand...
Click to collapse
I am trying to lookout for the usb storage of the phone by connecting usb cable but even it is not get recognized by the windows. And if I connect charger no battery charging is also visible. Please any senior member of the forum try to figure it out and give some suggestion..
rawalmaulin said:
I am trying to lookout for the usb storage of the phone by connecting usb cable but even it is not get recognized by the windows. And if I connect charger no battery charging is also visible. Please any senior member of the forum try to figure it out and give some suggestion..
Click to expand...
Click to collapse
If nothing recognizes it and has no signs of life, I'm sorry but it seems hard bricked.
Sent from my SGH-T959 using xda app-developers app
iKoolkid said:
If nothing recognizes it and has no signs of life, I'm sorry but it seems hard bricked.
Sent from my SGH-T959 using xda app-developers app
Click to expand...
Click to collapse
Isn't that possible if I could flash bootloader and my phone could atleast start. Or should I go to Samsung and reclaim the device as I have purchased just 10 days back...
rawalmaulin said:
Isn't that possible if I could flash bootloader and my phone could atleast start. Or should I go to Samsung and reclaim the device as I have purchased just 10 days back...
Click to expand...
Click to collapse
Go to Samsung and make up something, if Odin can't recognize it or you can't get into recovery, you cannot flash anything.
Sent from my SGH-T959 using xda app-developers app
Hi.
I got my hands on a tab, running on Android. I have no idea about the manufacturer; however, the boot-up screen says ATLAS.
The issue is that whenever I try to Power the device on, it gets stuck on the boot screen for hours together, following which the battery drains out. I can't even get the device into download mode as the Volume keys are touch-based.
I tried charging the device to 100% and yet it was stuck on the boot screen. I also tried pressing the power button for 30 seconds (as suggested on the net) and yet the device failed to boot.
If the device needs flashing a new rom, please provide instructions for that as well!
Any help would be really appreciated. Thank you!
Note: The only hardware buttons on the device are the Power-button and the Home-button.
flash the firmware if you have ! or cwm backup or go to service center !
Well.. I guess the tab you bought is not a new tab, right?
Whether it is true or not, try to connect your tab with a PC first to find out if the PC is able to read it.
If yes, try to find out a compatible ROM for your device. Let me know if any more news with your tab
Sent from my WT19i using xda premium
Rei Zazie said:
Well.. I guess the tab you bought is not a new tab, right?
Whether it is true or not, try to connect your tab with a PC first to find out if the PC is able to read it.
If yes, try to find out a compatible ROM for your device. Let me know if any more news with your tab
Sent from my WT19i using xda premium
Click to expand...
Click to collapse
You are right. The tab isn't new and it belongs to a friend of mine. And yes, the PC isn't able to detect it. Since the tab is able to make it till the boot screen, I thought I could enter download mode and go through the process of flashing CWM through Odin, but that seems to be a pain as all the volume buttons are touch based and not the hardware ones.
If I can get into download mode, I suppose I can get it into working condition (after finding a compatible rom, of course!).
anabhi said:
flash the firmware if you have ! or cwm backup or go to service center !
Click to expand...
Click to collapse
The tab isn't being detected by the PC. As a result, I can't do anything!
gadgyfreak said:
The tab isn't being detected by the PC. As a result, I can't do anything!
Click to expand...
Click to collapse
Ok, so first of all, can you find out what exactly is your tab's brand? because if you can, then we can try to find a proper fix for it..
I have a Samsung S6 (SM-G920V) Verizon 32 GB. It was rooted with Ping-Pong Root (apk).
I try to install TWRP. At the restart, my cell phone would not start more. Apparently it was not compatible with my version of mobile phone.
TWRP not installed, so I understand.
When I turn it on, it stays on a light-blue screen.
I try to install a stock firmware with Odin3 but the application remains frozen with the message 'NAND write start!' for several hours. And sometimes the status message 'Set Partition' appears in the box where it should say 'PASS' at the conclusion flashing.
You have a solution? What?
If I can give links to the files you need, also they are grateful.
Are you in download mode with the phone when you are trying to odin back to stock? Silly question but I have to ask.
lucas_z said:
I have a Samsung S6 (SM-G920V) Verizon 32 GB. It was rooted with Ping-Pong Root (apk).
I try to install TWRP. At the restart, my cell phone would not start more. Apparently it was not compatible with my version of mobile phone.
TWRP not installed, so I understand.
When I turn it on, it stays on a light-blue screen.
I try to install a stock firmware with Odin3 but the application remains frozen with the message 'NAND write start!' for several hours. And sometimes the status message 'Set Partition' appears in the box where it should say 'PASS' at the conclusion flashing.
You have a solution? What?
If I can give links to the files you need, also they are grateful.
Click to expand...
Click to collapse
The bootloader is locked on Verizon. No custom recoveries for our phones.
I had trouble getting Odin to work on mine once. I went back and forth with 3.09 and 3.10, closed odin, opened it back up and it finally took. Try a different USB port if you have one.
bc760 said:
Are you in download mode with the phone when you are trying to odin back to stock? Silly question but I have to ask.
Click to expand...
Click to collapse
Yes
Have you tried a factory reset? Go into maintenance mode. Same buttons as download mode but with your phone turned on. As soon as the screen goes black, release the buttons.
Tulsadiver said:
Have you tried a factory reset? Go into maintenance mode. Same buttons as download mode but with your phone turned on. As soon as the screen goes black, release the buttons.
Click to expand...
Click to collapse
I tried, but when I select that option, the phone returns to show the light-blue screen attached to the publication.
Any option, shows me that screen. I'm desperate.
lucas_z said:
I tried, but when I select that option, the phone returns to show the light-blue screen attached to the publication.
Any option, shows me that screen. I'm desperate.
Click to expand...
Click to collapse
Did you try the verizon repair assistant? Or maybe kies?
http://www.verizonwireless.com/support/knowledge-base-80201/
http://www.samsung.com/us/kies/
Tulsadiver said:
Did you try the verizon repair assistant? Or maybe kies?
Click to expand...
Click to collapse
Yes, both. But they are not compatible.
I installed the drivers for Samsung, and try 2 different versions, and... nothing!
lucas_z said:
Yes
Click to expand...
Click to collapse
How are you getting into download mode?
Sent from my NCC-1701 using Tapatalk.
riker147 said:
How are you getting into download mode?
Sent from my NCC-1701 using Tapatalk.
Click to expand...
Click to collapse
Download Mode works, apparently. Or at least it shows me that screen. In this way I connect to the PC and use Odin3.
lucas_z said:
Download Mode works, apparently. Or at least it shows me that screen. In this way I connect to the PC and use Odin3.
Click to expand...
Click to collapse
What I meant was, what button combination are you using to get into download mode?
Are you doing it like this?
Power Down the Galaxy S6
Press and Hold the Home Button, Power Button and Volume Down Buttons at the Same Time
Continue Holding These Buttons Until You See a Special Download Mode Menu
Once You See that Download Mode Menu, Immediately Let Go of Those Buttons
You’ll Need to Press the Volume Up Button to Accept the Warning
If so, what firmware are you trying to flash? Did you check MD5?
Have you tried a different cable?
Different USB port?
Even a different PC? (If one is available)
lucas_z said:
Download Mode works, apparently. Or at least it shows me that screen. In this way I connect to the PC and use Odin3.
Click to expand...
Click to collapse
Is the file from this post the one you have been trying? With your problem, it should be. This is a full wipe tar.
Also, make sure kies isn't open the same time Odin is.
http://forum.xda-developers.com/verizon-galaxy-s6/development/5-15-stock-odin-tar-t3109676
riker147 said:
What I meant was, what button combination are you using to get into download mode?
Are you doing it like this?
Power Down the Galaxy S6
Press and Hold the Home Button, Power Button and Volume Down Buttons at the Same Time
Continue Holding These Buttons Until You See a Special Download Mode Menu
Once You See that Download Mode Menu, Immediately Let Go of Those Buttons
You’ll Need to Press the Volume Up Button to Accept the Warning
If so, what firmware are you trying to flash? Did you check MD5?
Have you tried a different cable?
Different USB port?
Even a different PC? (If one is available)
Click to expand...
Click to collapse
Yes, I'm doing that.
I tried installing the firmware of the following links:
- https://www.androidfilehost.com/?fid=23991606952607102
and
- https://www.androidfilehost.com/?fid=23991606952613680
Yes, I checked MD5 both.
The cable used is provided by Samsung.
I tried three different USB ports, always in the same PC.
Tulsadiver said:
Is the file from this post the one you have been trying? With your problem, it should be. This is a full wipe tar.
Also, make sure kies isn't open the same time Odin is.
http://forum.xda-developers.com/verizon-galaxy-s6/development/5-15-stock-odin-tar-t3109676
Click to expand...
Click to collapse
I think I download a firmware with a similar name.
I'll try this, and then you commented.
Kies always kept closed (even the process was not listed in the task manager).
lucas_z said:
I think I download a firmware with a similar name.
I'll try this, and then you commented.
Kies always kept closed (even the process was not listed in the task manager).
Click to expand...
Click to collapse
If that doesn't work, some people have reported having luck restoring their phones using Samsung Smart Switch. It's main purpose is to transfer data from one phone to another but it also has "Emergency Recovery" and "Software Update and Initialization" sections.
Here is a YouTube video to help you out. https://www.youtube.com/watch?v=y8AZyalTf5Y
riker147 said:
If that doesn't work, some people have reported having luck restoring their phones using Samsung Smart Switch. It's main purpose is to transfer data from one phone to another but it also has "Emergency Recovery" and "Software Update and Initialization" sections.
Here is a YouTube video to help you out. https://www.youtube.com/watch?v=y8AZyalTf5Y
Click to expand...
Click to collapse
I've tried. But Smart Switch does not recognize my phone.
lucas_z said:
I think I download a firmware with a similar name.
I'll try this, and then you commented.
Kies always kept closed (even the process was not listed in the task manager).
Click to expand...
Click to collapse
MANY THANKS!
They revived my mobile phone that believed lost.
I honestly do not know how to thank. They really are experts.
lucas_z said:
MANY THANKS!
They revived my mobile phone that believed lost.
I honestly do not know how to thank. They really are experts.
Click to expand...
Click to collapse
It worked? Great! Good for you!
If anyone is still having this trouble a great tip is to use as many versions of odin possible