Hello all, I just bought a gear 2 neo thinking it would work with my phone...silly me!
I have tied multiple gear managers ect.. the phone will connect via bluetooth however the watch will not initialize. I cannot use the watch at all. Is there a way to just use its basic features with my phone? I appreciate all the help I can get.
PS: the model number of my phone is sght989d and im running cyanogen mod 11 (android 4.4.3)
Hi,
I have a Alcatel one touch scribe HD (4.2.1) wich is a mediatek based divice.
I can't get my SW2 to connect with my phone for longer then 1 minute. Smart connect says its still connected but the watch is not responding if i change a watchface with smart connect. If i install a new app it doesnt come trough on the watch.
I have scanned the whole internet for a solution but with no luck. I did read that SW2 is not very compatible with mediatek devices.
Is there a solution for this problem? IOr shall i return the watch and go for a Pebble?
Frank
Hi,
I am trying to pair my Huawai mediapad m3 with my new Samsung gear S3. Unfortunately after installing the the gear manager on my Phablet it is not even recognizing the watch by scanning reachable devices .
Is their any possibility to make both devices communicate?
EMUI Version 4.1
Android Version 6.0
Anybody who could help me in this? :fingers-crossed:
Hi
Same problem here.
Did you manage to pair the watch?
The Gear Manager app isn't compatible with tablets. Not even Samsung's own tablets (including those that are fully functioning smartphones). I keep my watch remotely connected to a cheap phone that's permanently docked on my home wifi.
Hey all, thanks in advance for any responses. Trying to pair Gear S3 Frontier with Nokia 6, but it never connects. I have tried the non-samsung phone Gear Manager from the Samsung website, but when I attempt to setup it sees the watch but never actually connects. Any ideas? Not a huge issue as I am only using this phone temporarily, but I hate not having functionality between the watch and the phone.
In case it matters for whatever reason, it is the LTE version of the watch.
Thanks!
sdclams
The same happened when I tried to pair Gear S3 Frontier with Nokia 5 phone.
i face the same problem and i went to samsung and they told me that nokia is not support samsung smart watches, nokia must have an update allow to connect the gear. hope we get update from nokia
sdclams said:
Hey all, thanks in advance for any responses. Trying to pair Gear S3 Frontier with Nokia 6, but it never connects. I have tried the non-samsung phone Gear Manager from the Samsung website, but when I attempt to setup it sees the watch but never actually connects. Any ideas? Not a huge issue as I am only using this phone temporarily, but I hate not having functionality between the watch and the phone.
In case it matters for whatever reason, it is the LTE version of the watch.
Thanks!
sdclams
Click to expand...
Click to collapse
When it gets to the screen to pair the two devices (should say "refer to phone to complete setup" or something similar on the gear, and have the loading circle on the phone) without closing the gear app, open bluetooth then click on the Gear in the bluetooth devices menu. Should connect and complete the setup. For some reason the connection to the gear disconnects midway through setup and doesnt attempt to reconnect, so you have to do it manually. After that there shouldnt be any issue with the gears connection to the phone.
Found this out while mucking around with phone and gear in bed one morning.
ragegamr said:
When it gets to the screen to pair the two devices (should say "refer to phone to complete setup" or something similar on the gear, and have the loading circle on the phone) without closing the gear app, open bluetooth then click on the Gear in the bluetooth devices menu. Should connect and complete the setup. For some reason the connection to the gear disconnects midway through setup and doesnt attempt to reconnect, so you have to do it manually. After that there shouldnt be any issue with the gears connection to the phone.
Found this out while mucking around with phone and gear in bed one morning.
Click to expand...
Click to collapse
It worked for Nokia 5 as well
Thank you
Worked on my Nokia too but the problem seems to be that the watch and the phone wont reconnect automatically if the connection breaks. I need to go to Settings - Bluetooth and tap the Gear S3 row so it will connect.
Anyone else facing the same?
Nokia 6 - Gear S3 Frontier Dutch
Also my Dutch Gear S3 Frontier wont connect to my Nokia 6.
Tizen 2.3.2.3 / Software R760XXU2BQC5
TA-1021
Samsung Gear 2.2.17022862
Gear S Plugin 2.2.03.17041441N
Samsung Accessory Service 3.1.51.70612
SM-R760
Anybody a solution ?
ragegamr said:
When it gets to the screen to pair the two devices (should say "refer to phone to complete setup" or something similar on the gear, and have the loading circle on the phone) without closing the gear app, open bluetooth then click on the Gear in the bluetooth devices menu. Should connect and complete the setup. For some reason the connection to the gear disconnects midway through setup and doesnt attempt to reconnect, so you have to do it manually. After that there shouldnt be any issue with the gears connection to the phone.
Found this out while mucking around with phone and gear in bed one morning.
Click to expand...
Click to collapse
Thanks for this .
Worked a treat on my temporary Nokia 5
Cheers Tony
Gear S3 does not connect with my OPPO R& plus as well! On the application it says not compatible!! Any suggestions. Thanks in advance.
As ragegamr said - WHEN THE SAMSUNG GEAR APP DISPLAYS THE SPINNING GALAXY TRYING TO PAIR WITH THE WATCH AND THE WATCH SAYS CHECK YOUR PHONE TO COMPLETE THE SETUP GO TO YOUR PHONE'S SETTINGS - BLUETOOTH - AND CLICK ON THE GEAR S3 TO CONNECT TO IT. THEN GO BACK TO THE GEAR APP.
isroisro said:
As ragegamr said - WHEN THE SAMSUNG GEAR APP DISPLAYS THE SPINNING GALAXY TRYING TO PAIR WITH THE WATCH AND THE WATCH SAYS CHECK YOUR PHONE TO COMPLETE THE SETUP GO TO YOUR PHONE'S SETTINGS - BLUETOOTH - AND CLICK ON THE GEAR S3 TO CONNECT TO IT. THEN GO BACK TO THE GEAR APP.
Click to expand...
Click to collapse
That works around the set-up issue but the symptom is actually due to a larger issue of the Gear S3 and the phone never automatically connecting.
I used to have a Samsung S8+ and never had issues with connectivity.
I could leave my phone on my desk, walk to the other side of the building, hear the watch disconnect then walk back and hear it connect automatically. Seamless - as it should be.
Now on my Nokia 8 I need to manually go into Bluetooth and connect to the watch every time the phone loses connectivity to it. This is ridiculous.
Further, when connecting to my car stereo, the phone calls no longer go to the car.
It looks like Nokia might need to do something to fix the Bluetooth problems at the driver or firmware level.
Well with my Nokia 8 sirocco the gear s3 fails to connect even when tapping manually. Once i tap on Gear s3 it says connecting, it shows connected for 1 second and again disconnects. Any help?
ragegamr said:
When it gets to the screen to pair the two devices (should say "refer to phone to complete setup" or something similar on the gear, and have the loading circle on the phone) without closing the gear app, open bluetooth then click on the Gear in the bluetooth devices menu. Should connect and complete the setup. For some reason the connection to the gear disconnects midway through setup and doesnt attempt to reconnect, so you have to do it manually. After that there shouldnt be any issue with the gears connection to the phone.
Found this out while mucking around with phone and gear in bed one morning.
Click to expand...
Click to collapse
I am trying on nokia 6 2017 and still does not work.
Thank you so much!
This device in not compatible with Gear s3 .
Hello there,
I recently had a chat with Samsung support and they mentioned that only few devices are support with their watches.
check on Samsung website >>/global/galaxy/gear-s3/device-compatibility/
[Jaybee(Agent):11:19:30] Basing from mt resources the Nokia 6 cannot be seen as one of the compatible device.
[(Customer):11:21:48] So, developers need to make a patch for it ?
[Jaybee(Agent):11:22:31] It is not actually an error on Samsung side since the device is made for other devices.
[Jaybee(Agent):11:23:31] One thing that I can think off is that by the time the Gear S3 was released the Nokia 6 has not been manufactured and I believe this was the first Android device of Nokia.
[(Customer):11:24:06] Yeah, I believe so..
[(Customer):11:24:41] Is that any future for nokia to get possible connection with Gear s3
[Jaybee(Agent):11:26:46] We are actually unable to tell if in the future that the Gear S3 will be compatible with the Nokia.
[Jaybee(Agent):11:27:28] We hope that would happen since we definitely want to make sure that our products can be connected to any brands.
Another thing you can do is : go into gear s app> settings> gear connection (off) try to make it on. (if you are lucky)
I wish I had my HTC one M8
varun.gid said:
Well with my Nokia 8 sirocco the gear s3 fails to connect even when tapping manually. Once i tap on Gear s3 it says connecting, it shows connected for 1 second and again disconnects. Any help?
Click to expand...
Click to collapse
I have exactly the same problem with my Nokia 8 sirocco
varun.gid said:
Well with my Nokia 8 sirocco the gear s3 fails to connect even when tapping manually. Once i tap on Gear s3 it says connecting, it shows connected for 1 second and again disconnects. Any help?
Click to expand...
Click to collapse
Did you had any luck with this? Because I am having exactly the same issue?
easy solution
Activate Developer Mode in your phone. In Developer options find Bluetooth AVRCP Version click on it and change it to 1.3 (mine was set to 1.4 as default) restart your phone and connect it again(you might to reinstall and unpaired your Gear S3). works on my Nokia X6 2018 no problems. Cheers from Scotland ps let me know guys if it works for you (probably its same problem and solution for all android phones which have connection problems with Gear smart watches...)
brtq82 said:
Activate Developer Mode in your phone. In Developer options find Bluetooth AVRCP Version click on it and change it to 1.3 (mine was set to 1.4 as default) restart your phone and connect it again(you might to reinstall and unpaired your Gear S3). works on my Nokia X6 2018 no problems. Cheers from Scotland ps let me know guys if it works for you (probably its same problem and solution for all android phones which have connection problems with Gear smart watches...)
Click to expand...
Click to collapse
Unfortunately, your solution did not work for my Nokia 8 Sirocco, thank you anyway.
brtq82 said:
Activate Developer Mode in your phone. In Developer options find Bluetooth AVRCP Version click on it and change it to 1.3 (mine was set to 1.4 as default) restart your phone and connect it again(you might to reinstall and unpaired your Gear S3). works on my Nokia X6 2018 no problems. Cheers from Scotland ps let me know guys if it works for you (probably its same problem and solution for all android phones which have connection problems with Gear smart watches...)
Click to expand...
Click to collapse
Mine is Nokia X6(2018) China version. I tried your ways to connect my gear s3 but it didn't work. It's not work for my phone. Thank you all the same.
Hello all. I'm new to the xda forums and if this post is in the wrong place, let me know. Here is what I wanted to ask. I have a non Samsung tablet and a Gear S3. In the compatabile device requirements for the Gear S3, it says you need a device with Android 4.4 or higher and 2GB of RAM. I have Android 7.0 and at least 2GB of RAM, but the Gear S3 does not want to connect. I can install Galaxy Wearables, Gear S Plugin and Samsung Accessory Service without issue. It is in the tablet Bluetooth menu that I find the watch is connected as input instead of being a standard Bluetooth device when paired. How can I get the watch to connect in standard Bluetooth mode instead of input and get it to show up in the Galaxy Wearables application?
EDIT: I just realized that the description for the application said it was not compatible with tablets this entire time. I forgot to show the entire description when I installed it. Please disregard this entire thread, or remove it if possible.