[Tweaks][Guide]Build.prop Tweaks - Android General

Warning:
This Tweaks may brick your Android device. Make sure that you take a complete backup of your ROM using a custom recovery. I am not responsible if you brick your device.
Introduction
As you know Android is open source and the development of Android is increased in today’s life. Basically, what happens is Android operating system is having some of the information and that is really important a lot. Now, whenever a user wants to do editing in this the Android system they do changes in build prop. Build prop tweaks are something which helps you to do changes in the system and customize your android.
Android is open source so what does the users and developers do is the just check for the system codes. Which will suit best in every Android smartphone? So today we are sharing the Build Prop Tweaks for your Android device. This tweak works on every Android device. It will work absolutely fine in Android versions such as jelly bean, KitKat, Lollipop and Marshmallow.
The thing is that if you are having any rooted Android device. So this tweak will work absolutely fine. Every user can do editing. But while editing you have to make sure that you do proper editing or else it will lead to brick your Android device. Then you have to Install custom ROM on your Android device. You can easily increase the bootup time of your Android. Increase sound and much more.
Let me tell you an example.
Suppose if you are using any of your Android devices. In your Android, there is no navigation bar. Now accidentally you drop your Android device. Now, at this situation your buttons are not working. With the help of build prop, you can add navigation bar on your screen easily on your Android device.
You have to make sure that you don’t brick your Android device. While doing any changes on your Android device. You have to play safe if you have to play with build prop.
If you will add up this code on your Android device. Then you have to restart your Android device. To make your device to run those code. This is really very simple and easy if you follow up this guide properly then you will be able to run those codes. So let’s get started how can you apply those codes on your Android device.
Best Build Prop Tweaks Codes
Below are the Build Prop Tweaks which will help you out to install best function on your devices such as fasten your booting speed increase your internet speed and much more.
1. Better RAM management
Code:
ro.HOME_APP_ADJ=1
2. Improves audio and video recording quality
Code:
ro.media.enc.jpeg.quality=100
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=8000000
ro.media.capture.maxres=8m
ro.media.panorama.defres=3264×1840
ro.media.panorama.frameres=1280×720
ro.camcorder.videoModes=true
ro.media.enc.hprof.vid.fps=65
3. Faster streaming videos
Code:
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
media.stagefright.enable-rtsp=true
media.stagefright.enable-record=false
4. Video acceleration and HW debugging. debug.composition.type can also be changed to cpu or mdp.
Code:
debug.sf.hw=1
debug.performance.tuning=1
video.accelerate.hw=1
debug.egl.profiler=1 # Measure rendering time in adb shell dumpsys gfxinfo
debug.egl.hw=1
debug.composition.type=gpu # Disable hardware overlays and use GPU for screen compositing
5. Disables built in error reporting.
Code:
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
6. Better net speeds.
Code:
net.tcp.buffersize.default=4096,87380,256960, 4096, 16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,409 6,163 84,256960
net.tcp.buffersize.umts=4096,8 7380,256960,4096,163 84,256960
net.tcp.buffersize.gprs=4096,8 7380,256960,4096,163 84,256960
net.tcp.buffersize.edge=4096,8 7380,256960,4096,163 84,256960
7. Saves power.
Code:
ro.mot.eri.losalert.delay=1000 (could brake tethering.)
ro.ril.power_collapse=1
pm.sleep_mode=1
wifi.supplicant_scan_interval=180
ro.mot.eri.losalert.delay=1000
8. 3G tweaks.
Code:
ro.ril.hep=0
ro.ril.hsxpa=2
ro.ril.gprsclass=12
ro.ril.enable.dtm=1
ro.ril.hsdpa.category=8
ro.ril.enable.a53=1
ro.ril.enable.3g.prefix=1
ro.ril.htcmaskw1.bitmask=4294967295
ro.ril.htcmaskw1=14449
ro.ril.hsupa.category=6
9. Disables logcat
Code:
logcat.live=disable
10. Screen recognizes only two fingers.
Code:
ro.product.multi_touch_enabled=true
ro.product.max_num_touch=2
11. Support for ipv4 and ipv6.
Code:
persist.telephony.support.ipv6=1
persist.telephony.support.ipv4=1
12. Phone rings immediately.
Code:
ro.telephony.call_ring.delay=0
ring.delay=0
13. Disables blackscreen issue after a call.
Code:
ro.lge.proximity.delay=25
mot.proximity.delay=25
14. Better scrolling.
Code:
windowsmgr.max_events_per_sec=150
ro.min_pointer_dur=8 ro.max.fling_velocity=12000
ro.min.fling_velocity=8000
15. Better signal.
Code:
persist.cust.tel.eons=1
16. Better call voice quality.
Code:
ro.ril.enable.amr.wideband=1
17. Better signal.
Code:
ro.config.hw_fast_dormancy=1
18. Faster boot.
Code:
ro.config.hw_quickpoweron=true
19. Disables error checking.
Code:
ro.kernel.android.checkjni=0
ro.kernel.checkjni=0
20. Dalvik Virtual Machine tweaks.
Code:
dalvik.vm.checkjni=false
dalvik.vm.dexopt-data-only=1
dalvik.vm.heapstartsize=5m
dalvik.vm.heapgrowthlimit=48m
dalvik.vm.heapsize=64m
dalvik.vm.verify-bytecode=false
dalvik.vm.execution-mode=int:jit
dalvik.vm.lockprof.threshold=250
dalvik.vm.dexopt-flags=m=v,o=y
dalvik.vm.stack-trace-file=/data/anr/traces.txt
dalvik.vm.jmiopts=forcecopy
21. Disables locating.
Also delete /system/app/networklocation.apk and /system/
Code:
framework/com.android.location.provider.jar[/I]
ro.com.google.locationfeatures=0
ro.com.google.networklocation=0
22. Disables sending of usage data.
Code:
ro.config.nocheckin=1
23. Better image quality, lower performance.
Code:
persist.sys.use_dithering=1
24. Disable notification while adb is active
Code:
persist.adb.notify=0
25. Change LCD density
Code:
ro.sf.lcd.density=xxx
Note: Replace "xxx" with numeric value.
26. MMS APN retry timer set to 2 sec( if SMS/MMS couldn`t be sent, it retries after 2 instead of 5 seconds).
Code:
ro.gsm.2nd_data_retry_config=max/_retries=3, 2000, 2000, 2000
27. Key lights stay on while screen is on.
Code:
ro.mot.buttonlight.timeout=0
28. Disable strict mode checking.
Code:
persist.android.strictmode=0
29. Remove FPS cap. May be unstable – better have it activated
Code:
debug.gr.swapinterval=0
30. build.prop tweaks for battery life
Code:
wifi.supplicant_scan_interval=180
pm.sleep_mode=1
ro.ril.disable.power.collapse=0
31. build.prop tweaks for improved performance
Code:
debug.performance.tuning=1
How To Use Build Prop Tweaks On Your Android Device.
If you don’t know how to install those codes on your Android device. Don’t worry. About how can you install those codes on your Android device? If you are having rooted Android device on your device. Then you are good to go.
1) Download and install root explorer on your Android device from above given requirements
2) Open the application and grant the root permissions
3) Now, simply open go to /System/ and then you will be able to see Build.Prop file
4) Now, click on the option called as Mount R/O.
5) Long press on that files and you will get a pop-up of open with
6) Just hit open with text editor and then you are good to go
7) Copy the above code of your choice and simply paste on your build.Prop
8) Click on the save changes and then reboot your Android device.

Which is the best app to edit build.prop?

AK205 said:
Which is the best app to edit build.prop?
Click to expand...
Click to collapse
Use any file manager app with root access like Root Explorer, ES File Manager etc.

If possible, please add Init.d tweaks also @bravonova

Nice
Es ist oft frustrierend, wenn man alle Antworten weiß, aber niemand kümmert sich darum die Fragen zu stellen :|

devmtk said:
If possible, please add Init.d tweaks also @bravonova
Click to expand...
Click to collapse
I will add Init.d tweaks too

devmtk said:
If possible, please add Init.d tweaks also @bravonova
Click to expand...
Click to collapse
Init.d tweak thread created. Visit here.

second build.prop improved my camera quality from earlier

Your tweaks doesn't work for my build.prop many things are not in my build.prop. Help me. It is from a custom rom on the note 4 (n910f)
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=MMB29M
ro.build.display.id=Noble N910X PE6
ro.build.version.incremental=N910FXXS1DPE6
ro.build.version.sdk=23
ro.build.version.preview_sdk=0
ro.build.version.codename=REL
ro.build.version.all_codenames=REL
ro.build.version.release=6.0.1
ro.build.version.security_patch=2016-06-01
ro.build.version.base_os=
ro.build.date=Wed May 25 20:58:26 KST 2016
ro.build.date.utc=1464177506
ro.build.type=user
ro.build.user=dpi
ro.build.host=SWDD6317
ro.build.tags=release-keys
ro.build.flavor=hero2ltexx-user
ro.product.model=SM-G935F
ro.product.brand=samsung
ro.product.name=hero2ltexx
ro.product.device=hero2lte
ro.product.board=APQ8084
# ro.product.cpu.abi and ro.product.cpu.abi2 are obsolete,
# use ro.product.cpu.abilist instead.
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.cpu.abilist=armeabi-v7a,armeabi
ro.product.cpu.abilist32=armeabi-v7a,armeabi
ro.product.cpu.abilist64=
ro.product.manufacturer=samsung
ro.product.locale=en-GB
ro.wifi.channels=
ro.board.platform=apq8084
# ro.build.product is obsolete; use ro.product.device
ro.build.product=hero2lte
# Do not try to parse description, fingerprint, or thumbprint
ro.build.description=trltexx-user 6.0.1 MMB29M N910FXXS1DPE6 release-keys
ro.build.fingerprint=samsung/trltexx/trlte:6.0.1/MMB29M/N910FXXS1DPE6:user/release-keys
ro.build.characteristics=phone
# Samsung Specific Properties
ro.build.PDA=N910FXXS1DPE6
ro.build.hidden_ver=N910FXXS1DPE6
ro.config.rm_preload_enabled=0
ro.build.changelist=7733605
ro.product_ship=true
ro.chipname=APQ8084
# end build properties
#
# HWUI_BUILD_PROPERTIES
#
ro.hwui.texture_cache_size=88
ro.hwui.layer_cache_size=58
ro.hwui.path_cache_size=16
ro.hwui.texture_cache_flushrate=0.4
ro.hwui.shape_cache_size=4
ro.hwui.gradient_cache_size=2
ro.hwui.drop_shadow_cache_size=6
ro.hwui.r_buffer_cache_size=8
ro.hwui.text_small_cache_width=1024
ro.hwui.text_small_cache_height=1024
ro.hwui.text_large_cache_width=4096
ro.hwui.text_large_cache_height=2048
ro.hwui.fbo_cache_size=16
#
# from device/samsung/hero2lte/system.prop
#
#
# system.prop for apq8084
#
# Disable airplane mode shutdown feature
persist.radio.apm_mdm_not_pwdn=1
debug.sf.hw=0
debug.egl.hw=0
#debug.composition.type=c2d
persist.hwc.mdpcomp.enable=true
persist.mdpcomp.4k2kSplit=1
debug.mdpcomp.logs=0
dalvik.vm.heapsize=36m
dev.pm.dyn_samplingrate=1
persist.demo.hdmirotationlock=false
#RIL JB IMS
persist.radio.jbims=1
#ro.hdmi.enable=true
#persist.speaker.prot.enable=false
qcom.hw.aac.encoder=true
#
# system props for the cne module
#
persist.cne.feature=0
persist.cne.dpm=0
persist.dpm.feature=0
#system props for the MM modules
media.stagefright.enable-player=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-fma2dp=true
media.stagefright.enable-scan=true
mmp.enable.3g2=true
media.aac_51_output_enabled=true
mm.enable.smoothstreaming=true
#3183219 is decimal sum of supported codecs in AAL
#codecs: DivX DivXHD AVI AC3 ASF AAC QCP DTS 3G2 MP2TS
mm.enable.qcom_parser=3183219
persist.mm.enable.prefetch=true
# Default to AwesomePlayer
media.stagefright.use-awesome=false
#system props for time-services
persist.timed.enable=true
#
# system prop for opengles version
#
# 196608 is decimal for 0x30000 to report version 3
ro.opengles.version=196609
# system property for maximum number of HFP client connections
bt.max.hfpclient.connections=1
# System property for cabl
ro.qualcomm.cabl=1
#Simulate sdcard on /data/media
#
persist.fuse_sdcard=true
#system prop for Bluetooth SOC type
qcom.bluetooth.soc=rome
#
#snapdragon value add features
#
ro.qc.sdk.audio.ssr=false
##fluencetype can be "fluence" or "fluencepro" or "none"
ro.qc.sdk.audio.fluencetype=none
persist.audio.fluence.voicecall=true
persist.audio.fluence.voicerec=false
persist.audio.fluence.speaker=true
#system prop for RmNet Data
persist.rmnet.data.enable=true
persist.data.wda.enable=true
persist.data.df.dl_mode=5
persist.data.df.ul_mode=5
persist.data.df.agg.dl_pkt=10
persist.data.df.agg.dl_size=4096
persist.data.df.mux_count=8
persist.data.df.iwlan_mux=9
persist.data.df.dev_name=rmnet_usb0
persist.data.llf.enable=true
#property to enable user to access Google WFD settings
persist.debug.wfd.enable=1
##property to choose between virtual/external wfd display
persist.sys.wfd.virtual=0
# disable tunnel encoding for amrwb
tunnel.audio.encode = false
#Buffer size in kbytes for compress offload playback
audio.offload.buffer.size.kb=32
#Enable offload audio video playback by default
av.offload.enable=true
#enable voice path for PCM VoIP by default
use.voice.path.for.pcm.voip=true
# system prop for NFC DT
ro.nfc.port=I2C
#enable dsp gapless mode by default
audio.offload.gapless.enabled=false
#initialize QCA1530 detection
sys.qca1530=detect
#hwui properties
ro.hwui.texture_cache_size=72
ro.hwui.layer_cache_size=48
ro.hwui.r_buffer_cache_size=8
ro.hwui.path_cache_size=32
ro.hwui.gradient_cache_size=1
ro.hwui.drop_shadow_cache_size=6
ro.hwui.texture_cache_flushrate=0.4
ro.hwui.text_small_cache_width=1024
ro.hwui.text_small_cache_height=1024
ro.hwui.text_large_cache_width=2048
ro.hwui.text_large_cache_height=1024
#Enable property to enable ds2
#audio.dolby.ds2.enabled=true
#enable property for hard bypass
#audio.dolby.ds2.hardbypass=true
# LCD Density
ro.sf.lcd_density=640
# slook
ro.slook.ver=1
# Enable to set a tcp delayed ack on framework
persist.tcp.delack.enable=true
# Use LTE limited service for CS
persist.radio.lte_vrte_ltd=1
# System proverty for sys info indication
persist.radio.add_power_save=1
# Enable EONS. ENABLED = true, DISABLE = false
persist.eons.enabled=true
# SAMP_SPCM
sys.config.samp_spcm_enable=true
sys.config.spcm_db_enable=true
sys.config.spcm_db_launcher=true
sys.config.spcm_preload_enable=true
sys.config.spcm_gcm_kill_enable=true
# VQG - User Agent Header for Video-Streaming Client
net.streaming.rtsp.uaprof=http://wap.samsungmobile.com/uaprof/
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.astcenc.astcsupport=1
ro.mct.compressiontype=ETC1
ro.config.dmverity=true
ro.config.rkp=true
ro.config.kap=true
ro.telephony.default_network=9
ro.use_data_netmgrd=false
persist.radio.sib16_support=0
ro.config.ringtone_2=Basic_Bell.ogg
ro.config.notification_sound_2=S_Charming_Bell.ogg
ro.config.ringtone=Over_the_horizon.ogg
ro.config.notification_sound=S_Whistle.ogg
ro.config.alarm_alert=Morning_flower.ogg
ro.config.media_sound=Media_preview_Touch_the_light.ogg
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=256m
dalvik.vm.heapsize=512m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=2m
dalvik.vm.heapmaxfree=8m
persist.sys.logkit.ctrlcode=0
keyguard.no_require_sim=true
ro.carrier=unknown
ro.com.google.clientidbase=android-samsung
ro.security.icd.flagmode=multi
ro.vendor.extension_library=libqc-opt.so
persist.radio.apm_sim_not_pwdn=1
ro.build.scafe=capuccino
ro.build.scafe.size=short
ro.build.scafe.shot=single
ro.build.scafe.cream=white
ro.build.scafe.version=2016A
ro.hdcp2.rx=tz
ro.secwvk=144
ro.securestorage.support=false
ro.sec.fle.encryption=true
security.mdpp=None
ro.security.mdpp.ver=2.0
ro.security.mdpp.release=6
security.mdpp.result=None
ro.security.mdpp.ux=Enabled
ro.hardware.keystore=mdfpp
ro.hardware.gatekeeper=mdfpp
ro.security.vpnpp.ver=1.4
ro.security.vpnpp.release=6.0
ro.config.dha_cached_min=4
ro.config.dha_cached_max=12
ro.config.dha_empty_min=16
ro.config.dha_empty_max=48
ro.config.dha_th_rate=2.5
ro.config.dha_lmk_scale=1.341
ro.error.receiver.default=com.samsung.receiver.error
config.disable_atlas=true
ro.security.reactive.active=1
ro.smps.enable=true
ro.setupwizard.network_required=false
ro.setupwizard.wifi_required=false
ro.setupwizard.mode=OPTIONAL
ro.com.google.gmsversion=6.0_r3
ro.build.selinux=1
persist.sys.dalvik.vm.lib.2=libart
dalvik.vm.isa.arm.variant=krait
dalvik.vm.isa.arm.features=default
ro.config.knox=0
ro.config.tima=0
ro.config.timaversion=0
ro.config.iccc_version=1.0
ro.kernel.qemu=0
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
persist.gps.qc_nlp_in_use=1
persist.loc.nlp_name=com.qualcomm.location
ro.gps.agps_provider=1
ro.build.version.sdl=2301
ro.expect.recovery_id=0xc6c239a6df89ad5fbadf6729ebd1442943d00423000000000000000000000000
wlan.wfd.hdcp=disable
ro.ril.fast.dormancy.rule=0
ro.ril.enable.amr.wideband=1
ro.ril.fast.dormancy.rule=0
debug.performance.tuning=1
video.accelerate.hw=1
debug.sf.hw=1
ring.delay=0
debug.egl.profiler=1
debug.egl.hw=1
debug.composition.type=gpu
ro.ril.disable.power.collapse=0
wifi.supplicant_scan_interval=300
ro.config.hw_power_saving=1
pm.sleep_mode=1

@rskstier after editing build.prop, reboot once for settings to take effect

bravonova said:
@rskstier after editing build.prop, reboot once for settings to take effect
Click to expand...
Click to collapse
I take one line out of your tweak rules. That is not in my build.prop just like many others.
ro.media.enc.jpeg.quality
How can it be that it is not present at the build.prop ?

rskstier said:
I take one line out of your tweak rules. That is not in my build.prop just like many others.
ro.media.enc.jpeg.quality
How can it be that it is not present at the build.prop ?
Click to expand...
Click to collapse
Flashing custom ROM doesn't mean that it will have build.prop tweaks added.

bravonova said:
Flashing custom ROM doesn't mean that it will have build.prop tweaks added.
Click to expand...
Click to collapse
oh okay so you mean that I need to add rules? I thought I had to adapt existing rules.

rskstier said:
oh okay so you mean that I need to add rules? I thought I had to adapt existing rules.
Click to expand...
Click to collapse
Yes you need to add those lines in build.prop which tweak you want to apply then reboot device.

bravonova said:
Yes you need to add those lines in build.prop which tweak you want to apply then reboot device.
Click to expand...
Click to collapse
I have certain rules inserted rebooted my build.prop and restart my phone and I only had a vibrating phone and the picture hung on the Samsung logo . It was trembling so one time and then after that two times in succession. It went like on. At one point was flashing ledtje my phone blue. What went wrong?

rskstier said:
I have certain rules inserted rebooted my build.prop and restart my phone and I only had a vibrating phone and the picture hung on the Samsung logo . It was trembling so one time and then after that two times in succession. It went like on. At one point was flashing ledtje my phone blue. What went wrong?
Click to expand...
Click to collapse
Which tweaks have you applied ??

bravonova said:
Which tweaks have you applied ??
Click to expand...
Click to collapse
I copy and paste the numbers:
1,2,12,15,16,17
I do this with the pc and i add it in a map and replace it with root explorer. Then i reboot my phone. My phone is a note 4 n910f.

rskstier said:
I copy and paste the numbers:
1,2,12,15,16,17
I do this with the pc and i add it in a map and replace it with root explorer. Then i reboot my phone. My phone is a note 4 n910f.
Click to expand...
Click to collapse
You have to add these codes to your existing build.prop . Do not change or delete any earlier/original build.prop codes. If you have changed anything else then may be you got issue.

bravonova said:
You have to add these codes to your existing build.prop . Do not change or delete any earlier/original build.prop codes. If you have changed anything else then may be you got issue.
Click to expand...
Click to collapse
I have literally added the above codes and nothing removed in the build.prop I had on my PC. Build.prop which I replaced by the custom build.prop , then I rebooted my phone and ran as described previously against the previous problem.

rskstier said:
I have literally added the above codes and nothing removed in the build.prop I had on my PC. Build.prop which I replaced by the custom build.prop , then I rebooted my phone and ran as described previously against the previous problem.
Click to expand...
Click to collapse
If you able to connect your phone through adb, then copy your old build.prop using following commands.
Code:
adb push *your directory path*\build.prop /system/
Change *your directory path* to the directory path on your computer where you stored build.prop

Related

[HowTo] Show hidden Market Apps on Gingerbread Roms

I decided to create a new topic in dev, as this issue affected me in MS2Ginger, CM7 and MIUI, and users from any of these roms could benefit from the info.
If this should be on General, I'm sorry mods, here seemed more appropriate.
Guys, for those like me that couldn't see some apps on Market after using Gingerbread ROMs, I found a workaround after some research that worked for me.
* I just tested it on MIUI but it should work on others.
Basically the Market checks the build.prop for the fingerprint, so I used this one from Nexus S on 2.3.4 and had no issues so far.
Code:
ro.build.description=soju-user 2.3.4 GRJ22 121341 release-keys
ro.build.fingerprint=google/soju/crespo:2.3.4/GRJ22/121341:user/release-keys
*If someone can provide build.prop or fingerprint from Milestone 2 would be great. Didn't want to flash stock froyo just for that. Tried to find a build.prop from any Droid with gingerbread with no success, and I'm downloading now the leak from Droid 2 Global to test.
To use it :
adb pull /system/build.prop c:\where\you\want\to\put\it\
backup the file
open with notepad++ (I guess wordpad would work too) and replace with the fingerprint
save
adb remount ( or mount /system r/w using root explorer )
adb push c:\where\you\want\to\put\it\build.prop /system/
adb reboot
changes to references to defy(jordan) made my lights and torch stop to work. will wipe the build.prop from first post until find a fix
For those who already applied it, Sorry!
Below it's the original build.prop for MIUI 1.8.19 (will5) with the fingerprint changed but the original fingerprint commented for easy rollback in case of any new bugs noticed due to this change
Code:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=MIUI
ro.build.display.id=MIUI.1.8.19
ro.build.version.incremental=1.8.19
ro.build.version.sdk=10
ro.build.version.codename=REL
ro.build.version.release=2.3.5
ro.build.date=Fri Aug 19 11:00:00 GMT 2011
ro.build.date.utc=1313727796
ro.build.type=userdebug
ro.build.user=builder
ro.build.host=winton-desktop
ro.build.tags=test-keys
ro.product.model=MB525
ro.product.brand=MOTO
ro.product.name=libra_jordan
ro.product.device=jordan
ro.product.board=jordan
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=motorola
ro.product.locale.language=en
ro.product.locale.region=GB
ro.wifi.channels=
ro.board.platform=omap3
# ro.build.product is obsolete; use ro.product.device
ro.build.product=jordan
# Do not try to parse ro.build.description or .fingerprint
#ro.build.description=libra_jordan-userdebug 2.3.5 MIUI 1.8.19 test-keys
#ro.build.fingerprint=MOTO/libra_jordan/jordan:2.3.5/MIUI/1.8.12:userdebug/test-keys
ro.build.description=soju-user 2.3.4 GRJ22 121341 release-keys
ro.build.fingerprint=google/soju/crespo:2.3.4/GRJ22/121341:user/release-keys
# end build properties
#
# system.prop for generic sdk
#
rild.libpath=/system/lib/librilswitch.so
rilswitch.vendorlibpath=/system/lib/libril-moto-umts-1.so
rilswitch.ganlibpath=/system/lib/libganril.so
rild.libargs=-d /dev/ttyS0
ro.sf.lcd_density=240
# Default network type.
# 3 -> GSM/WCDMA (auto mode, according to PRL)
ro.telephony.default_network=3
wifi.interface = tiwlan0
# Time between scans in seconds. Keep it high to minimize battery drain.
# This only affects the case in which there are remembered access points,
# but none are in range.
wifi.supplicant_scan_interval = 90
# The OpenGL ES API level that is natively supported by this device.
# This is a 16.16 fixed point number
ro.opengles.version = 131072
# This is a high density device with more memory, so larger vm heaps for it.
dalvik.vm.heapsize=48m
# Forbid format of these partitions in mount menu :
ro.cwm.forbid_format=/misc,/radio,/boot,/recovery,/pds,/system
# BatteryLight while charging, enabled by default.
ro.battery_light=false
# declare we're using Usb.apk
ro.usb.use_custom_service=1
# disable Windows Media Sync Usb.apk mode
ro.mtp_available=0
# use 1% battery steps
ro.product.use_charge_counter=1
# use default multitouch configuration
persist.input.multitouch_points=4
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.media.capture.maxres=5m
ro.media.capture.flash=led
ro.media.capture.flashIntensity=41
ro.media.capture.torchIntensity=25
ro.media.capture.classification=classH
#ro.media.capture.flip=horizontalandvertical
persist.sys.purgeable_assets=0
ro.com.android.wifi-watchlist=GoogleGuest
ro.error.receiver.system.apps=com.google.android.feedback
ro.setupwizard.enterprise_mode=1
ro.com.google.clientidbase=android-verizon
ro.com.google.locationfeatures=1
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.config.vc_call_vol_steps=7
ro.telephony.call_ring.multiple=false
windowsmgr.max_events_per_sec=130
ro.telephony.call_ring.delay=1000
ro.url.safetylegal=http://www.motorola.com/staticfiles/Support/legal/?model=A855
ro.setupwizard.enable_bypass=1
ro.default_usb_mode=4
ro.media.dec.jpeg.memcap=20000000
ro.media.dec.aud.wma.enabled=1
ro.media.dec.vid.wmv.enabled=1
ro.product.multi_touch_enabled=true
ro.com.motorola.smartsensor=true
dalvik.vm.lockprof.threshold=500
ro.kernel.android.checkjni=0
dalvik.vm.dexopt-data-only=1
dalvik.vm.dexopt-flags=m=y
keyguard.no_require_sim=true
ro.com.android.dateformat=MM-dd-yyyy
ro.com.android.dataroaming=false
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.com.google.clientidbase=android-google
ro.com.android.wifi-watchlist=GoogleGuest
ro.setupwizard.enterprise_mode=1
ro.setupwizard.mode=DISABLED
ro.com.android.dateformat=yyyy-MM-dd
ro.com.android.dataroaming=true
ro.ril.enable.managed.roaming=1
ro.ril.oem.nosim.ecclist=911,112,999,000,08,118,120,122,110,119,995
ro.ril.emc.mode=2
ro.moddevice=Defy
dalvik.vm.lockprof.threshold=500
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.HOME_APP_ADJ=1
debug.sf.hw=1
debug.composition.type=hw
pm.sleep_mode=1
ro.ril.disable.power.collapse=0
persist.adb.notify=0
debug.performance.tuning=1
video.accelerate.hw=1
ro.kernel.android.checkjni=0
dalvik.vm.startheapsize=8m
mot.proximity.delay=150
ro.config.ringtone=Pegasus.ogg
ro.config.notification_sound=Procyon.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
persist.sys.timezone=Europe/Berlin

its possyble install

it possyble install form samsung i8550 firmware to my device he have 1:1 hardware buth differens is stock rom and camera my is with 8mp and front i 2mp
doomstars1 said:
it possyble install form samsung i8550 firmware to my device he have 1:1 hardware buth differens is stock rom and camera my is with 8mp and front i 2mp
Click to expand...
Click to collapse
you don't give your device model, detsils, etc. give some informatoin about both device.
my device i fadar/feng fdt w999 chinise phone i true change my rom 2 months
doomstars1 said:
my device i fadar/feng fdt w999 chinise phone i true change my rom 2 months
Click to expand...
Click to collapse
sorry bro, those chipset are different. your phone using MTK6577 and samsung i8550 using Qualcomm MSM8625Q Snapdragon 200. its trully hard or may be impossible port. you have to find a samsung clone copy that has your similar chipset.
IsolatedKM said:
sorry bro, those chipset are different. your phone using MTK6577 and samsung i8550 using Qualcomm MSM8625Q Snapdragon 200. its trully hard or may be impossible port. you have to find a samsung clone copy that has your similar chipset.
Click to expand...
Click to collapse
is not mtk i msm8625q look my build.prop
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=JZO54K
ro.build.display.id=msm8625-userdebug 4.1.2 JZO54K eng.root.20130829.164046 test-keys
ro.build.version.incremental=eng.root.20130829.164046
ro.build.version.sdk=16
ro.build.version.codename=REL
ro.build.version.release=4.1.2
ro.build.date=2013年 08月 29日 星期四 16:41:54 CST
ro.build.date.utc=1377765715
ro.build.type=userdebug
ro.build.user=root
ro.build.host=android-desktop
ro.build.tags=test-keys
ro.product.model=FDT W999
ro.product.brand=FDT W999
ro.product.name=FDT W999
ro.product.device=msm8625
ro.product.board=7x27
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=unknown
ro.product.locale.language=en
ro.product.locale.region=GB
ro.wifi.channels=
ro.board.platform=msm7627a
# ro.build.product is obsolete; use ro.product.device
ro.build.product=W802
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=msm8625-userdebug 4.1.2 JZO54K eng.root.20130829.164046 test-keys
ro.build.fingerprint=qcom/msm8625/msm8625:4.1.2/JZO54K/eng.root.20130829.164046:userdebug/test-keys
ro.build.characteristics=default
persist.sys.language=en
persist.sys.country=GB
persist.sys.localevar=
persist.sys.timezone=Asia/Shanghai
ro.build.version.subversion=V1.0.0
ro.adups.fota.device=FDT_W999
# end build properties
#
# system.prop for surf
#
rild.libpath=/system/lib/libril-qc-1.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
ril.subscription.types=NV,RUIM
DEVICE_PROVISIONED=1
keyguard.no_require_sim=1
debug.sf.hw=1
debug.composition.7x27A.type=dyn
debug.composition.7x25A.type=dyn
debug.composition.8x25.type=dyn
ro.sf.lcd_density=320
ro.sf.7x27A.lcd_density=320
ro.sf.8x25.lcd_density=320
dalvik.vm.heapsize=24m
persist.gralloc.cp.level3=1
#
# system props for the cne module
#
persist.cne.bat.range.low.med=30
persist.cne.bat.range.med.high=60
persist.cne.loc.policy.op=/system/etc/OperatorPolicy.xml
persist.cne.loc.policy.user=/system/etc/UserPolicy.xml
persist.cne.bwbased.rat.sel=false
persist.cne.snsr.based.rat.mgt=false
persist.cne.bat.based.rat.mgt=false
persist.cne.rat.acq.time.out=30000
persist.cne.rat.acq.retry.tout=0
persist.cne.fmc.init.time.out=30
persist.cne.fmc.comm.time.out=130
persist.cne.fmc.retry=false
persist.cne.feature=0
#
# system props for the MM modules
#
media.stagefright.enable-player=true
media.stagefright.enable-meta=false
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
media.stagefright.enable-fma2dp=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
# Headset hook delay in milli seconds
headset.hook.delay=500
#
# system prop for audio post processing
#
audio.legacy.postproc=true
#
# system prop for opengles version
#
ro.opengles.version=131072
#
# system props for the data modules
#
ro.use_data_netmgrd=true
persist.data.ds_fmc_app.mode=0
#
# system props for IMS module
#
persist.ims.regmanager.mode=0
#
# system prop for requesting Master role in incoming Bluetooth connection.
#
ro.bluetooth.request.master=true
#
# system prop for Bluetooth FTP profile
#
ro.qualcomm.bluetooth.ftp=true
#
# system prop for Bluetooth SAP profile
#
ro.qualcomm.bluetooth.sap=true
#
# system prop for Bluetooth Auto connect for remote initated connections
#
ro.bluetooth.remote.autoconnect=true
#
#system property for Bluetooth discoverability timeout in seconds
#0: Always discoverable
#debug.bt.discoverable_time=0
#
# System prop to disable strict mode flash on display
#
persist.sys.strictmode.visual=false
#
# System prop to enable/disable OMH. Enabled by default
#
persist.omh.enabled=1
#System prop to enable ehrpd capability
ro.config.ehrpd=true
# System property for cabl
ro.qualcomm.cabl=1
# System props for telephony
# System prop to turn on CdmaLTEPhone always
telephony.lteOnCdmaDevice=1
#
# System prop for sending transmit power request to RIL during WiFi hotspot on/off
#
ro.ril.transmitpower=true
#
#
#System prop to determine availability of
#analog fm path
#
ro.fm.analogpath.supported=true
#
#System property for FM transmitter
#
ro.fm.transmitter=false
#
#System property for single instance recording
#
ro.fm.mulinst.recording.support=false
#
#for using emmc partition instead sdcard
#
persist.sys.emmcsdcard.enabled=0
#
# system props for SD card emulation of emmc partition
#
ro.emmc.sdcard.partition=20
#
# system property to enforce Phone Mode view
#
ro.screen.layout=normal
#
#System prop for setting the pixel format
#
#ro.staticwallpaper.pixelformat=RGB_565
#
#System prop for disabling the meta data mode for encoder
#
debug.camcorder.disablemeta=0
#
# Simulate sdcard on /data/media
#
persist.fuse_sdcard=false
#
# System prop for using landscape preview layout in camera
#
debug.camera.landscape=true
#
# System prop for capping scroll velocity
#
ro.max.fling_velocity=4000
#
# System prop for enabling discontinuity for HLS Variant Playlist
#
httplive.enable.discontinuity=true
#
# Enable Dynamic sampling to help with cases like mp3 playback.
#
dev.pm.dyn_samplingrate=1
#
# On Strider below period is found to improve power numbers for AAC MP4
#
dev.pm.dyn_sample_period=700000
#
# System prop for enabling the cdrom feature
#
persist.service.cdrom.enable=1
#for enable poweroff charging feature
persist.pwroffcharging.enable=1
#enable read network preference from NV 10
persist.radio.mode_pref_nv10=1
#
# System prop for mapping to TTY Device for CSVT
#
hw.tty.vtdevice=/dev/smd11
# Add 20120823 TS-FMC-V2 start
#
# System prop for enabling the fmc feature
#
ro.config.cwenable=1
#
# System prop for enabling the fmc v2.0 feature
#
ro.config.fmcv2support=1
# Add 20120823 TS-FMC-V2 end
# set default mtu to 1380
persist.data_netmgrd_mtu=1380
#
# System prop for enabling forced sound in camera start/stop tones
#
ro.camera.sound.forced=1
#
# Snapdragon value add features
#
ro.qc.sdk.camera.facialproc=true
ro.qc.sdk.gestures.camera=false
#
# Enable swaprect feature
#
debug.sf.swaprect=1
#add by wjw to enable reset invalid sim card
persist.radio.reset_invalid_sim_card=1
#
# ADDITIONAL_BUILD_PROPERTIES
#
dalvik.vm.heapstartsize=5m
dalvik.vm.heapsize=128m
keyguard.no_require_sim=true
ro.com.android.dataroaming=true
ro.com.android.dateformat=MM-dd-yyyy
ro.config.ringtone=cloud.ogg
ro.config.notification_sound=pixiedust.ogg
ro.carrier=unknown
ro.config.alarm_alert=Alarm_Classic.ogg
ro.vendor.extension_library=/system/lib/libqc-opt.so
dalvik.vm.heapgrowthlimit=48m
dalvik.vm.lockprof.threshold=500
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
persist.sys.fc.counter=0
persist.sys.anr.counter=0
# begin adupsfota properties
ro.adups.fota.oem=uniscope
ro.adups.fota.version=FDT W999_W802_V1.0.0_130829
# begin adupsfota properties
sorry bro, I saw in that in internet. but it is still hardy to try. you should try cm11 or paranoid android.

[Download] Android 6.0.1 Marshmallow Full Firmware Files for Moto X Style (Asia-DS)

Mega link, add https in front
mega.nz/#!9dpWlD5K!UdBJaalpN5YaP-mZ-L3VQAU8nB0_MKpFn-VGf3kx3qg
Nice. Won't attempt flashing the full firmware, but will be playing with the contents of this. Hopefully Moto Display is fixed for Google Play Music's previous/play/next buttons.
/inb4 requests to port it, and repeated questions on how to get this and that working on their Style/Pure, that this firmware is not intended for.
EDIT:
Patched up to the first of March
Emojis are now up to date, including the new ones
Google Now launcher layout is still set up as 4 icons per row and not 5.
Moto apps updated (app name - version):
Audio Effects - 6.0.1
Moto Actions - 2.00.14
Moto Boot Services - 5.0.3
Moto Camera - 5.1.13.12
Moto Connect - 2.08.20-294
Moto Display - 3.21-M.12-S27.2-000
Moto Gallery - 530034
Moto Help - 1.7.0
Moto Voice - 8.0.17.1
Moto - 4.0.31
Build.prop
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=MPH24.107-58
ro.build.display.id=MPH24.107-58
ro.build.version.incremental=43
ro.build.version.sdk=23
ro.build.version.preview_sdk=0
ro.build.version.codename=REL
ro.build.version.all_codenames=REL
ro.build.version.release=6.0.1
ro.build.version.security_patch=2016-03-01
ro.build.version.base_os=
ro.build.date=Thu Mar 3 06:35:53 CST 2016
ro.build.date.utc=1457008553
ro.build.type=user
ro.build.user=hudsoncm
ro.build.host=ilclbld28
ro.build.tags=release-keys
ro.build.flavor=clark_retasia_ds-user
ro.product.model=XT1572
ro.product.brand=motorola
ro.product.name=clark_retasia_ds
ro.product.device=clark_ds
ro.product.board=msm8992
# ro.product.cpu.abi and ro.product.cpu.abi2 are obsolete,
# use ro.product.cpu.abilist instead.
ro.product.cpu.abi=arm64-v8a
ro.product.cpu.abilist=arm64-v8a,armeabi-v7a,armeabi
ro.product.cpu.abilist32=armeabi-v7a,armeabi
ro.product.cpu.abilist64=arm64-v8a
ro.product.manufacturer=motorola
ro.product.locale=en-GB
ro.wifi.channels=
ro.board.platform=msm8992
# ro.build.product is obsolete; use ro.product.device
ro.build.product=clark_ds
# Do not try to parse description, fingerprint, or thumbprint
ro.build.description=clark_retasia_ds-user 6.0.1 MPH24.107-58 43 release-keys
ro.build.fingerprint=motorola/clark_retasia_ds/clark_ds:6.0.1/MPH24.107-58/43:user/release-keys
ro.build.characteristics=default
# end build properties
#
# from device/qcom/msm8992/system.prop
#
#
# system.prop for plutonium
#
rild.libpath=/vendor/lib64/libril-qc-qmi-1.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
ril.subscription.types=NV,RUIM
DEVICE_PROVISIONED=1
# Start in global mode
# Motorola set it base on product
# ro.telephony.default_network=10
debug.sf.hw=1
debug.egl.hw=1
debug.composition.type=c2d
persist.hwc.mdpcomp.enable=true
persist.mdpcomp.4k2kSplit=1
persist.mdpcomp_perfhint=50
debug.mdpcomp.logs=0
persist.metadata_dynfps.disable=true
persist.hwc.ptor.enable=true
dalvik.vm.heapsize=36m
dev.pm.dyn_samplingrate=1
persist.demo.hdmirotationlock=false
ro.hdmi.enable=true
persist.speaker.prot.enable=false
#0 is default(30 min)
persist.spkr.cal.duration=0
# Motorola disable qcom aac hw encoder
#qcom.hw.aac.encoder=true
#
# system props for the cne module
#
persist.cne.feature=0
# enable SSR for all subsystems except adsp
persist.sys.ssr.restart_level=venus AR6320 modem
persist.sys.qc.sub.rdump.on=1
#system props for the MM modules
media.stagefright.enable-player=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-fma2dp=true
media.stagefright.enable-scan=true
mmp.enable.3g2=true
# Motorola disable smooth streaming
#mm.enable.smoothstreaming=true
media.aac_51_output_enabled=true
#3314291: Decimal sum after adding FLAC parser flag 131072
#37491 is decimal sum of supported codecs in AAL
#codecs: DivX DivXHD AVI AC3 ASF AAC QCP DTS 3G2 MP2TS
mm.enable.qcom_parser=3314291
# Enable AwesomePlayer stats
persist.debug.sf.statistics=1
# Print clip name being played
media.stagefright.log-uri=1
# VIDC: debug_levels
# 1:ERROR 2:HIGH 4:LOW 0:NOLOGS 7:AllLOGS
vidc.debug.level=1
# Additional i/p buffer in case of encoder DCVS
vidc.enc.dcvs.extra-buff-count=2
#
# system props for the data modules
#
ro.use_data_netmgrd=true
persist.data.netmgrd.qos.enable=true
persist.data.mode=concurrent
ro.data.large_tcp_window_size=true
#system props for time-services
persist.timed.enable=true
#
# system prop for opengles version
#
# 196608 is decimal for 0x30000 to report major/minor versions as 3/0
# 196609 is decimal for 0x30001 to report major/minor versions as 3/1
ro.opengles.version=196609
# System property for cabl
ro.qualcomm.cabl=0
#
# System props for telephony
# System prop to turn on CdmaLTEPhone always
telephony.lteOnCdmaDevice=1
#
# System props for bluetooth
# System prop to turn on hfp client
bluetooth.hfp.client=1
#Simulate sdcard on /data/media
#
persist.fuse_sdcard=true
#system prop for Bluetooth SOC type
qcom.bluetooth.soc=rome
#system prop for A4WP profile support
#ro.bluetooth.a4wp=true
#system prop for wipower support
#ro.bluetooth.wipower=true
#Set this true as ROME on 8992 always comes with Wipower programmed
#and triggering embedded mode by deafult
#persist.BT3_2.version=true
#
#snapdragon value add features
#
ro.qc.sdk.audio.ssr=false
##fluencetype can be "fluence" or "fluencepro" or "none"
ro.qc.sdk.audio.fluencetype=none
persist.audio.fluence.voicecall=true
persist.audio.fluence.voicerec=false
persist.audio.fluence.speaker=true
ro.config.vc_call_vol_steps=8
ro.qc.sdk.sensors.gestures=true
ro.qc.sdk.gestures.camera=false
ro.qc.sdk.camera.facialproc=false
#property to enable user to access Google WFD settings.
#persist.debug.wfd.enable=1
#property to choose between virtual/external wfd display
persist.sys.wfd.virtual=0
tunnel.audio.encode = false
#enable gapless by default
audio.offload.gapless.enabled=true
#Buffer size in kbytes for compress offload playback
audio.offload.buffer.size.kb=32
#Enable offload audio video playback by default
av.offload.enable=true
#Enable 16 bit PCM offload by default
audio.offload.pcm.16bit.enable=true
#Enable multi offload by default
audio.offload.multiple.enabled=true
#Enable 24 bit PCM offload by default
audio.offload.pcm.24bit.enable=true
#property to enable VDS WFD solution
persist.hwc.enable_vds=1
#property for vendor specific library
ro.vendor.at_library=libqti-at.so
ro.vendor.gt_library=libqti-gt.so
sys.games.gt.prof=0
#hwui properties
ro.hwui.texture_cache_size=72
ro.hwui.layer_cache_size=48
ro.hwui.r_buffer_cache_size=8
ro.hwui.path_cache_size=32
ro.hwui.gradient_cache_size=1
ro.hwui.drop_shadow_cache_size=6
ro.hwui.texture_cache_flushrate=0.4
ro.hwui.text_small_cache_width=1024
ro.hwui.text_small_cache_height=1024
ro.hwui.text_large_cache_width=2048
ro.hwui.text_large_cache_height=1024
# enable navigation bar
qemu.hw.mainkeys=0
#enable voice path for PCM VoIP by default
use.voice.path.for.pcm.voip=true
#selects CoreSight configuration to enable
persist.debug.coresight.config=stm-events
#System property for FM transmitter
ro.fm.transmitter=false
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.build.version.full=Blur_Version.24.211.58.clark_retasia_ds.retasia.en.03
ro.mot.build.customerid=retasia
ro.mot.build.version.sdk_int=24
ro.fsg-id=emea_dsds
ro.telephony.default_network=9
telephony.lteOnCdmaDevice=0
ro.media.enc.aud.fileformat=amr
ro.media.enc.aud.codec=amrnb
persist.radio.multisim.config=dsds
persist.radio.force_get_pref=1
ro.config.ringtone=Moto.ogg
ro.config.notification_sound=Moto.ogg
ro.config.alarm_alert=Oxygen.ogg
ro.partial.display=true
persist.radio.mcfg_noreset=1
persist.radio.mcfg_remote=1
ro.product.display=Moto X Style
persist.audio.calfile0=/etc/acdbdata/Bluetooth_cal.acdb
persist.audio.calfile1=/etc/acdbdata/General_cal.acdb
persist.audio.calfile2=/etc/acdbdata/Global_cal.acdb
persist.audio.calfile3=/etc/acdbdata/Handset_cal.acdb
persist.audio.calfile4=/etc/acdbdata/Hdmi_cal.acdb
persist.audio.calfile5=/etc/acdbdata/Headset_cal.acdb
persist.audio.calfile6=/etc/acdbdata/Speaker_cal.acdb
persist.camera.tnr.video=on
persist.camera.tnr.preview=on
persist.mot.gps.conf.from.sim=true
ro.vendor.extension_library=libqti-perfd-client.so
persist.radio.apm_sim_not_pwdn=1
ro.bug2go.magickeys=24,26
persist.radio.no_wait_for_card=1
persist.radio.dfr_mode_set=1
persist.radio.relay_oprt_change=1
persist.radio.msgtunnel.start=true
persist.radio.oem_ind_to_both=0
persist.qcril_uim_vcc_feature=1
persist.data.qmi.adb_logmask=0
persist.radio.0x9e_not_callname=1
persist.radio.mt_sms_ack=30
persist.dpm.feature=0
persist.esdfs_sdcard=true
ro.usb.mtp=2e82
ro.usb.mtp_adb=2e76
ro.usb.ptp=2e83
ro.usb.ptp_adb=2e84
ro.usb.bpt=2ee5
ro.usb.bpt_adb=2ee6
ro.usb.bpteth=2ee7
ro.usb.bpteth_adb=2ee8
persist.audio.dualmic.config=endfire
persist.audio.fluence.voicecall=true
persist.audio.fluence.voicecomm=true
persist.audio.fluence.voicerec=false
persist.audio.fluence.speaker=false
persist.camera.HAL3.enabled=0
qcom.bt.le_dev_pwr_class=1
ro.bluetooth.hfp.ver=1.6
qcom.bluetooth.soc=rome
wc_transport.out_ringbuf_log=true
wc_transport.in_ringbuf_log=true
wc_transport.force_hcidump=true
wc_transport.force_special_byte=true
ro.frp.pst=/dev/block/bootdevice/by-name/frp
persist.mot.gps.smart_battery=1
dalvik.vm.boot-dex2oat-threads=2
dalvik.vm.dex2oat-threads=4
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=256m
dalvik.vm.heapsize=512m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=512k
dalvik.vm.heapmaxfree=8m
ro.MAX_HIDDEN_APPS=42
ro.sf.lcd_density=560
persist.radio.apn_delay=5000
persist.sys.media.use-awesome=false
audio.offload.disable=0
audio.offload.pcm.16bit.enable=false
audio.offload.pcm.24bit.enable=false
audio.offload.gapless.enabled=false
av.offload.enable=false
mm.enable.qcom_parser=4643
persist.radio.mot_ecc_enabled=1
persist.radio.mot_ecc_custid=common
keyguard.no_require_sim=true
drm.service.enabled=true
mdc_initial_max_retry=10
ro.adb.secure=1
ro.com.google.clientidbase=android-motorola
ro.com.google.clientidbase.ms=android-motorola
ro.com.google.clientidbase.am=android-motorola
ro.com.google.clientidbase.gmm=android-motorola
ro.com.google.clientidbase.yt=android-motorola
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.setupwizard.mode=OPTIONAL
ro.com.google.gmsversion=6.0_r2
ro.carrier=unknown
persist.sys.dalvik.vm.lib.2=libart
dalvik.vm.isa.arm64.variant=generic
dalvik.vm.isa.arm64.features=default
dalvik.vm.isa.arm.variant=cortex-a53
dalvik.vm.isa.arm.features=default
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
persist.gps.qc_nlp_in_use=0
ro.gps.agps_provider=1
ro.pip.gated=0
ro.expect.recovery_id=0x3d1a83c736a332fc14fddcd2848f7344c4698acd000000000000000000000000
Click to expand...
Click to collapse
Nice
So I guess we can see 6.0.1 in the coming future for the other variants too.
I suppose for anyone wanting to flash this, should be safe flashing the system and kernel, but I wouldn't flash anything else.
Waiting for review on 6.0.1
I gave it a shot on 1575. Just flashed kernel and system, boots fine with no issues other then lost wifi and calendar fc (just needs update).
Seems very smooth compared to 6.0 but we shall see.
Pretty much every google app needs to update so I am waiting for that now before further testing.
update: twrp did not survive the flash even though i did not flash recovery.
twrp flashed fine and backing up.
combined storage survived the flash.
successful root 2.62-3, restoring apps with tibu.
lost all radio connection after root, shows no sim.
root works fine in apps.
sim works again by disabling root in su. going to try a newer version.
updating binary seems to have fixed it so I'm going to leave it alone for now.
flashing/wiping modem did not help wifi but it did seem to make sim/radio more stable.
xposed works as expected.
flashed frankenclark and wifi now works fine. wanted to keep stock kernel but also wanted to see if this would work. with franken, this rom really flies and is very smooth.
as of now it seems everything can be working fine on xt1575.
google keyboard is barely working in swype mode. swiftkey is working fine though.
lafester said:
I gave it a shot on 1575. Just flashed kernel and system, boots fine with no issues other then lost wifi and calendar fc (just needs update).
Seems very smooth compared to 6.0 but we shall see.
Pretty much every google app needs to update so I am waiting for that now before further testing.
update: twrp did not survive the flash even though i did not flash recovery.
twrp flashed fine and backing up.
combined storage survived the flash.
successful root 2.62-3, restoring apps with tibu.
lost all radio connection after root, shows no sim.
root works fine in apps.
sim works again by disabling root in su. going to try a newer version.
updating binary seems to have fixed it so I'm going to leave it alone for now.
flashing/wiping modem did not help wifi but it did seem to make sim/radio more stable.
xposed works as expected.
flashed frankenclark and wifi now works fine. wanted to keep stock kernel but also wanted to see if this would work. with franken, this rom really flies and is very smooth.
as of now it seems everything can be working fine on xt1575.
Click to expand...
Click to collapse
Mean i can flash this buid for my XT1575 Pure as normal after that flash frankenclark kernel ?
Thanks.
lafester said:
I gave it a shot on 1575. Just flashed kernel and system, boots fine with no issues other then lost wifi and calendar fc (just needs update).
Seems very smooth compared to 6.0 but we shall see.
Pretty much every google app needs to update so I am waiting for that now before further testing.
update: twrp did not survive the flash even though i did not flash recovery.
twrp flashed fine and backing up.
combined storage survived the flash.
successful root 2.62-3, restoring apps with tibu.
lost all radio connection after root, shows no sim.
root works fine in apps.
sim works again by disabling root in su. going to try a newer version.
updating binary seems to have fixed it so I'm going to leave it alone for now.
flashing/wiping modem did not help wifi but it did seem to make sim/radio more stable.
xposed works as expected.
flashed frankenclark and wifi now works fine. wanted to keep stock kernel but also wanted to see if this would work. with franken, this rom really flies and is very smooth.
as of now it seems everything can be working fine on xt1575.
Click to expand...
Click to collapse
Well, I've followed your steps in wi-fi part, but it didn't help can't get wifi working, no matter what kernel I flash, tried 6.0 stock, 6.0.1 asia (this one), and franken - none of them give me wifi
nickanh75 said:
Mean i can flash this buid for my XT1575 Pure as normal after that flash frankenclark kernel ?
Thanks.
Click to expand...
Click to collapse
Did you try it? I'm just reporting what I did and how it worked.
---------- Post added at 04:01 PM ---------- Previous post was at 03:58 PM ----------
Sabissimo said:
Well, I've followed your steps in wi-fi part, but it didn't help can't get wifi working, no matter what kernel I flash, tried 6.0 stock, 6.0.1 asia (this one), and franken - none of them give me wifi
Click to expand...
Click to collapse
Did you only flash system and kernel after full wipe? Do you have xt1575?
Yup, tried that too, didn't help either I do have XT1575 Pure Edition.
I did flash full recovery image of XT1575 6.0, booted, then I've flashed system and kernel of this 6.0.1 - everything works except wi-fi
Flashing franken didn't change a thing for me
Reverting back to 6.0 kernel didn't change a thing either.
Flashing back 6.0 system did bring wi-fi back though)
I've tried all available modem files from 5.1 to 6.0.1 of retus and retasia models - nothing
Which is weird, given how smooth the transition between 5.1 and 6.0 was, with universal modem and all
I'll try one more time though, before abandoning this idea for now
The modem I flashed (although it did not appear to do anything for wifi) was the one direct from moto. I did the flash, erase, flash method if that helps any.
You need to flash the right NON-HLOS file to get WiFi working again
Many things can affect wifi. Root method, kernel and of course modem.
lafester said:
The modem I flashed (although it did not appear to do anything for wifi) was the one direct from moto. I did the flash, erase, flash method if that helps any.
Click to expand...
Click to collapse
Can you share modem file you used? Just in case
And what do you mean by "flash, erase, flash method"?
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot reboot
can't seem to upload at the moment.
From what was posted above, it appears flashing the frankenclark kernel is what made wifi work again.
Original 6.0.0 firmware for the xt1575 contained in "CLARK_RETUS_6.0_MPH24.49-18_cid9_subsidy-DEFAULT_CFC.xml.zip" Keep it handy if needed.
This is true, however it is not working for sabissimo, and i did do a modem flash prior to changing kernel.
Right, I'm assuming you flashed the modem from the file I referenced, the original xt1575 MM firmware?
Yes that looks like the same file
lafester said:
The modem I flashed (although it did not appear to do anything for wifi) was the one direct from moto. I did the flash, erase, flash method if that helps any.
Click to expand...
Click to collapse
On a totally different subject.... How did you get ur dbm reading into status bar?? Ive been wanting that since since i first got an android phone years ago?!!!?

Development [RECOVERY][OFFICIAL] TWRP for ASUS ROG Phone 5 & ROG Phone 5S

Code:
*** Disclaimer ***
All flashing is done at your own risk!
While nothing from this thread should break your device,
don't come back here blaming anyone if it does!
Introduction​
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and
Click to expand...
Click to collapse
Images​
Prerequisites​
Unlocked Bootloader
Click to expand...
Click to collapse
Installation instructions​
Fastboot Install Method:
You will need the platform-tools from the Android SDK on your computer. Find the Android command line tools section on the page linked and install the SDK tools package. From the SDK Manager, download only the platform-tools to get adb and fastboot binaries.
Windows users will need proper drivers installed on their computer. You can try the Naked ADB drivers or the Universal ADB drivers if you don't already have a working driver installed
On your device, go into Settings -> About and find the Build Number and tap on it 7 times to enable developer settings. Press back and go into Developer Options and enable USB debugging. From your computer, open a command prompt and type:
Code:
Code:
adb reboot bootloader
You should now be in fastboot mode.
Download the correct image file and copy the file into the same folder as your adb and fastboot binaries. Rename the image to twrp.img and type:
Code:
Code:
fastboot boot twrp.img
Now you are booted into TWRP, but it is NOT permanently installed. To install it permanently, use the "Flash current TWRP" option in the Advanced menu. This will install the currently booted TWRP permanently to both slots. NOTE: If you were previously rooted, you will need to re-install the root apk/zip as the TWRP install will overwrite it!
Click to expand...
Click to collapse
Device Changelog​Current version: 3.5.2_11-2:
3.5.2_11-2
Common version for all ROG 5 versions.
Fixed decryption issue
Spoiler: Old
3.5.2_11-0:
Initial version (Tested only on ROG Phone 5S, need info about ROG Phone 5).
Click to expand...
Click to collapse
Device Changelog​
Download for ROG Phone 5
Latest official ROG Phone 5 version
Click to expand...
Click to collapse
Download for ROG Phone 5S
Latest official ROG Phone 5 version
Click to expand...
Click to collapse
Sources
TWRP
Device tree
Kernel source
Click to expand...
Click to collapse
Known issues​
Device-specific
USB-OTG not working
Battery Status not working
Click to expand...
Click to collapse
Bug reporting​
If you have an issue, the first step is to post a recovery log so we can determine the cause of the issue. This is done in recovery using Advanced -> Copy Log, or adb pull /tmp/recovery.log. Once a log is uploaded we can determine how best to proceed. NOTE: Posts that are reporting bugs or issues without an accompanying recovery log will be ignored! Additionally, providing details about your device setup, including variant, firmware version, and exact steps to reproduce your issue will also be helpful in diagnosing the problem.
If your issue is determined to be a bug, please consider posting it to our github issues log. It's pretty much impossible for us to keep up with the more than 40 threads that we have for the devices that we "directly" support. If you have a significant problem that cannot be answered in this thread, your best bet is to contact us via our website. If you see someone that's struggling, feel free to point it out to us. We need your help to help us keep track of all of our devices! Thanks!
Click to expand...
Click to collapse
Additional Help/Support​
Live support is available on Zulip.
Click to expand...
Click to collapse
Credits​
@Freak07 and @Captain_Throwback for advices
@Qtr1st and @danfrid for testing
Click to expand...
Click to collapse
reserved
reserved
What info do you need for the original?
Spoiler: Full build.prop
Code:
# begin common build properties
# autogenerated by build/make/tools/buildinfo_common.sh
ro.system.build.date=Tue Aug 17 23:43:46 CST 2021
ro.system.build.date.utc=1629215026
ro.system.build.fingerprint=asus/WW_I005D/ASUS_I005_1:11/RKQ1.201022.002/18.0840.2107.151-0:user/release-keys
ro.system.build.id=RKQ1.201022.002
ro.system.build.tags=release-keys
ro.system.build.type=user
ro.system.build.version.incremental=18.0840.2107.151-0
ro.system.build.version.release=11
ro.system.build.version.release_or_codename=11
ro.system.build.version.sdk=30
ro.product.system.device=ASUS_I005_1
ro.product.system.model=ASUS_I005D
ro.product.system.name=WW_I005D
ro.product.system.brand=asus
ro.product.system.manufacturer=asus
# end common build properties
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=RKQ1.201022.002
ro.build.keys=release-keys
ro.build.display_build_number=true
ro.build.display.id=RKQ1.201022.002.WW_Phone-18.0840.2107.151-0
ro.build.version.incremental=18.0840.2107.151-0
ro.build.version.sdk=30
ro.build.version.preview_sdk=0
ro.build.version.preview_sdk_fingerprint=REL
ro.build.version.codename=REL
ro.build.version.all_codenames=REL
ro.build.version.release=11
ro.build.version.release_or_codename=11
ro.build.version.security_patch=2021-07-05
ro.build.version.base_os=
ro.build.version.min_supported_target_sdk=23
ro.build.date=Tue Aug 17 23:43:46 CST 2021
ro.build.date.utc=1629215026
ro.build.type=user
ro.build.user=android
ro.build.host=mcrd1-19
ro.build.tags=release-keys
ro.build.flavor=qssi-user
ro.build.system_root_image=false
ro.build.epad.project=
[Build] buildinfo.sh : TARGET_SKU=WW
[Build] buildinfo.sh : ASUS_TARGET_PRODUCT=
ro.vendor.build.fota.version=WW_I005D-18.0840.2107.151-0
ro.product.locale.region=
ro.build.software.version=18_0840_2107_151
ro.vendor.build.software.version=18_0840_2107_151
ro.vendor.build.asus.number=18.0840.2107.151-0
ro.vendor.build.asus.version=18.0840.2107.151
ro.build.product=ZS673KS
# ro.product.cpu.abi and ro.product.cpu.abi2 are obsolete,
# use ro.product.cpu.abilist instead.
ro.product.cpu.abi=arm64-v8a
ro.product.cpu.abilist=arm64-v8a,armeabi-v7a,armeabi
ro.product.cpu.abilist32=armeabi-v7a,armeabi
ro.product.cpu.abilist64=arm64-v8a
ro.product.locale=en-US
ro.wifi.channels=
# Do not try to parse thumbprint
# end build properties
#
# from vendor/asus/system.prop
#
#
# system.prop for ZS673KS
#
# add for beta-userstage
ro.vendor.asus.logupload=0
ro.vendor.asus.beta=0
ro.vendor.confidentiality=0
# end of vendor/asus/system.prop
#
# from vendor/asus/ZS673KS/twinapps/twinapps.prop
#
#
# system.prop for TwinApps
#
#ASUS IMS Carol_Hu: https://android-review.googlesource.com/c/platform/build/+/1417451
external_storage.cross_user.enabled=1
# end of vendor/asus/ZS673KS/twinapps/twinapps.prop
#
# from vendor/asus/ZS673KS/system.prop
#
#
# system.prop for ZS673KS
#
#ASUS BSP Wei ++
persist.sys.hardcoder.name=ta_itf
#ASUS BSP Wei --
#ASUS_BSP Jimmy add for vibration intensity ++
ro.vendor.asus.scale_low_max_amp=84
ro.vendor.asus.scale_none_max_amp=168
#ASUS_BSP Jimmy add for vibration intensity --
#ro.vendor.asus.logupload=0
vendor.display.disable_rounded_corner=0
#vendor.display.enable_rounded_corner=1
vendor.perf.workloadclassifier.enable=true
persist.log.tag.CompositionEngine=E
persist.log.tag.FreeReflect=E
persist.log.tag.BeaconStatManager=E
persist.log.tag.DEBUG_CACHE_UPLOAD_PV=E
persist.log.tag.SharedPreferencesImpl=E
persist.log.tag.DiskCacheProducer=E
persist.log.tag.HippyCore=E
persist.log.tag.MultiplexProducer=E
persist.log.tag.DataSource=E
persist.log.tag.AppStore-DownloadManagerService=E
persist.log.tag.AppStore-AppStoreDownloadManager=E
persist.log.tag.AppStore-NetworkPackageRepo=E
persist.log.tag.AppStore-WallpaperManagerService=E
persist.log.tag.AppStore-OkHttp-LL-getRecommendInstallApps=E
persist.log.tag.AppStore-OkHttp-EL-getRecommendInstallApps=E
persist.log.tag.AppStore-OkHttp-EL-getAppUpdateInfo=E
persist.log.tag.AppStore-OkHttp-LL-getAppUpdateInfo=E
persist.log.tag.AppStore-OkHttp-EL-getConfigItemData=E
persist.log.tag.AppStore-OkHttp-LL-getConfigItemData=E
persist.log.tag.AppStore-OkHttp-EL-getValidPreDownloadPkgs=E
persist.log.tag.AppStore-OkHttp-LL-getValidPreDownloadPkgs=E
persist.log.tag.AppStore-AppStoreDownloadManager=E
persist.log.tag.AppStore-OrderServiceManager=E
persist.log.tag.AppStore-NetworkSwitch=E
persist.log.tag.AppStore-OkHttp-LL-getGameConfig=E
persist.log.tag.AppStore-OkHttp-EL-getGameConfig=E
persist.log.tag.AppStore-OkHttp-EL-getPublicAppByPkgNameList=E
persist.log.tag.AppStore-OkHttp-LL-getPublicAppByPkgNameList=E
persist.log.tag.ANDR-PERF-LM=E
persist.log.tag.QC2C2DEngine=E
persist.log.tag.skia=E
persist.log.tag.GCloud=E
persist.log.tag.threaded_app=E
persist.log.tag.BatteryStatsImpl=E
persist.log.tag.NotificationFilter=E
persist.log.tag.SystemProperties=E
persist.log.tag.BufferQueueProducer=E
# end of vendor/asus/ZS673KS/system.prop
#
# from device/qcom/qssi/system.prop
#
#
# system.prop for qssi
#
rild.libpath=/vendor/lib64/libril-qc-hal-qmi.so
#rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
ril.subscription.types=RUIM,RUIM
DEVICE_PROVISIONED=1
# Set network mode to (NR_LTE_TDSCDMA_CDMA_EVDO_GSM_WCDMA, NR_LTE_TDSCDMA_CDMA_EVDO_GSM_WCDMA) for 8+8 mode device on DSDS mode
#ro.telephony.default_network=33,33
dalvik.vm.heapsize=36m
dev.pm.dyn_samplingrate=1
#ro.hdmi.enable=true
#persist.speaker.prot.enable=false
qcom.hw.aac.encoder=true
#
# system props for the cne module
#
persist.vendor.cne.feature=1
#system props for the MM modules
media.stagefright.enable-player=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-fma2dp=true
media.stagefright.enable-scan=true
media.stagefright.thumbnail.prefer_hw_codecs=true
mmp.enable.3g2=true
media.aac_51_output_enabled=true
media.settings.xml=/vendor/etc/media_profiles_vendor.xml
#16777215 is decimal sum of supported codecs in AAL
#codecs:(PARSER_)AAC AC3 AMR_NB AMR_WB ASF AVI DTS FLV 3GP 3G2 MKV MP2PS MP2TS MP3 OGG QCP WAV FLAC AIFF APE DSD MOV MHAS
vendor.mm.enable.qcom_parser=12451582
persist.mm.enable.prefetch=true
#
# system props for the data modules
#
ro.vendor.use_data_netmgrd=true
persist.vendor.data.mode=concurrent
#system props for time-services
persist.timed.enable=true
#
# System props for telephony
# System prop to turn on CdmaLTEPhone always
telephony.lteOnCdmaDevice=1
#Simulate sdcard on /data/media
#
persist.fuse_sdcard=true
#System props for BT
ro.bluetooth.library_name=libbluetooth_qti.so
persist.vendor.btstack.aac_frm_ctl.enabled=true
persist.bluetooth.avrcpversion=avrcp16
persist.vendor.btstack.enable.twsplus=true
persist.vendor.btstack.enable.twsplussho=true
# ASUS BSP Bluetooth: disable SWB
persist.vendor.qcom.bluetooth.enable.swb=false
persist.vendor.qcom.bluetooth.enable.swbpm=false
#system prop for RmNet Data
persist.rmnet.data.enable=true
persist.data.wda.enable=true
persist.data.df.dl_mode=5
persist.data.df.ul_mode=5
persist.data.df.agg.dl_pkt=10
persist.data.df.agg.dl_size=4096
persist.data.df.mux_count=8
persist.data.df.iwlan_mux=9
persist.data.df.dev_name=rmnet_usb0
#property to enable user to access Google WFD settings
persist.debug.wfd.enable=1
##property to choose between virtual/external wfd display
persist.sys.wfd.virtual=0
#property to enable HWC for VDS
debug.sf.enable_hwc_vds=1
#property to latch unsignaled buffer
debug.sf.latch_unsignaled=1
# enable tunnel encoding for amrwb
tunnel.audio.encode = true
#enable voice path for PCM VoIP by default
use.voice.path.for.pcm.voip=true
# system prop for NFC DT
ro.nfc.port=I2C
#initialize QCA1530 detection
sys.qca1530=detect
#Enable stm events
persist.debug.coresight.config=stm-events
#hwui properties
ro.hwui.texture_cache_size=72
ro.hwui.layer_cache_size=48
ro.hwui.r_buffer_cache_size=8
ro.hwui.path_cache_size=32
ro.hwui.gradient_cache_size=1
ro.hwui.drop_shadow_cache_size=6
ro.hwui.texture_cache_flushrate=0.4
ro.hwui.text_small_cache_width=1024
ro.hwui.text_small_cache_height=1024
ro.hwui.text_large_cache_width=2048
ro.hwui.text_large_cache_height=1024
config.disable_rtt=true
#Bringup properties
persist.sys.force_sw_gles=1
persist.vendor.radio.atfwd.start=true
ro.kernel.qemu.gles=0
qemu.hw.mainkeys=0
# ASUS_BSP "Enable IOT logging"+++
persist.vendor.service.bt.iotinfo.report.enable=true
# ASUS_BSP "Enable IOT logging"---
#Expose aux camera for below packages
vendor.camera.aux.packagelist=org.codeaurora.snapcam
#enable IZat OptInApp overlay
persist.vendor.overlay.izat.optin=rro
# Property for backup NTP Server
persist.backup.ntpServer="0.pool.ntp.org"
#Property to enable Mag filter
persist.vendor.sensors.enable.mag_filter=true
#Partition source order for Product/Build properties pickup.
ro.product.property_source_order=odm,vendor,product,system_ext,system
#Property to enable Codec2 for audio and OMX for Video
debug.stagefright.ccodec=1
#Property to set native recorder's maximum base layer fps
ro.media.recorder-max-base-layer-fps = 60
#Battery Property
ro.charger.enable_suspend = 1
# ASUS_BSP +++
persist.vendor.asus.logcat.filenum=20
# property for csclogtool
logtool.package=com.asus.csclogtool
logtool.class=com.asus.csclogtool.LogService
ro.asus.rog=1
# ASUS_BSP ---
# jack for default log flag
persist.vendor.asus.startlog=0
persist.vendor.sys.downloadmode.enable=0
# ASUS_BSP ---
# ASUS_BSP "Enable IOT logging"+++
persist.vendor.service.bt.iotinfo.report.enable=true
# ASUS_BSP "Enable IOT logging"---
# [ASUS BSP] for Poweroff Alarm Support
ro.vendor.asus.poweroffalarm_support=1
# ASUS_BSP AustinT "FP wakeup property"+++
persist.vendor.asus.fp.wakeup_support=true
persist.vendor.asus.fp.wakeup=false
# ASUS_BSP AustinT "FP wakeup property"---
# ASUS_BSP AustinC Dirac +++
ro.vendor.dirac.acs.controller=gef
ro.vendor.dirac.acs.storeSettings=1
ro.vendor.dirac.acs.ignore_error=0
ro.vendor.dirac.gef.int.did=0xF,0x313,0x2C4
ro.vendor.dirac.gef.ext.did=0xA,0x2D,0x14,0x2C7,0x2C9,0x1F7
ro.vendor.dirac.gef.int.tid=0x10012D00
ro.vendor.dirac.gef.int.mid=0x10012DE0
ro.vendor.dirac.gef.ext.mid=0x10012DE1
ro.vendor.dirac.gef.system_sound=1
ro.vendor.dirac.gef.ins.tid=0x10012D02
ro.vendor.dirac.gef.ins.mid=0x10012DE2
ro.vendor.dirac.gef.ins.did=0xF,0x313,0x2C4
ro.vendor.dirac.gef.ins.appt=0x00011131
ro.vendor.dirac.config=16
ro.vendor.dirac.acs.rotation=true
# ASUS_BSP AustinC Dirac ---
# ASUS_BSP AustinC +++
log.tag.APM_AudioPolicyManager=V
# ASUS_BSP AustinC ---
#ASUS_BSP : Anakin use ACCY generation 5
vendor.asus.accy_gen=5
# end of device/qcom/qssi/system.prop
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.treble.enabled=true
ro.vendor.build.asus.sku=WW
vendor.camera.asus.system=1
vendor.camera.expTimeMax=0
vendor.camera.cam6.crop_region=2:0,0,4160,3120;4:828,621,3332,2499
vendor.camera.preview_beauty=4:1;1:1;2:1;3:1;5:1;6:1
vendor.camera.preview_portrait=4:0;1:1;2:0;3:0
[email protected],[email protected],[email protected]
[email protected],[email protected]
[email protected],[email protected],[email protected]
[email protected],[email protected]
[email protected],[email protected],[email protected]
vendor.camera.dual_bokeh=4:0;1:0;2:0;3:0;5:1
vendor.camera.lens_type=4:standard;1:standard;2:wide-angle;3:macro;5:virtual;6:sat
vendor.camera.use_frame_processor=0
vendor.camera.ai_scene_mode=4:1;1:1;2:1;3:1;6:1
vendor.camera.undistortion.preview=4:0;1:0;2:1;3:0;6:1
vendor.camera.undistortion.video=4:0;1:0;2:0;3:0
vendor.camera.capture.override_max_digital_zoom=4:8;1:8
vendor.camera.cam4.stream_list=1P/2Y/1J
vendor.camera.cam1.stream_list=1P/2Y/1J
vendor.camera.cam4.exposure_time_range=100000,32000000000
vendor.camera.cam1.exposure_time_range=100000,32000000000
vendor.camera.cam2.exposure_time_range=100000,16000000000
vendor.camera.cam3.exposure_time_range=100000,16000000000
[email protected],[email protected],[email protected],[email protected]
[email protected],[email protected],[email protected],[email protected],[email protected],[email protected]
[email protected],[email protected],[email protected]
[email protected],[email protected],[email protected],[email protected]
[email protected],[email protected]
[email protected],[email protected],[email protected],[email protected],[email protected],[email protected]
vendor.camera.fovc=0:0;1:0;2:0;3:0;4:1;5:0;6:0
vendor.camera.night=4:1;1:0;2:1;3:0;6:1
vendor.camera.aux.packagelist=org.codeaurora.snapcam,android,com.android.systemui
net.bt.name=Android
ro.vendor.qti.va_aosp.support=1
twistedumbrella said:
What info do you need for the original?
Spoiler: Full build.prop
Code:
# begin common build properties
# autogenerated by build/make/tools/buildinfo_common.sh
ro.system.build.date=Tue Aug 17 23:43:46 CST 2021
ro.system.build.date.utc=1629215026
ro.system.build.fingerprint=asus/WW_I005D/ASUS_I005_1:11/RKQ1.201022.002/18.0840.2107.151-0:user/release-keys
ro.system.build.id=RKQ1.201022.002
ro.system.build.tags=release-keys
ro.system.build.type=user
ro.system.build.version.incremental=18.0840.2107.151-0
ro.system.build.version.release=11
ro.system.build.version.release_or_codename=11
ro.system.build.version.sdk=30
ro.product.system.device=ASUS_I005_1
ro.product.system.model=ASUS_I005D
ro.product.system.name=WW_I005D
ro.product.system.brand=asus
ro.product.system.manufacturer=asus
# end common build properties
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=RKQ1.201022.002
ro.build.keys=release-keys
ro.build.display_build_number=true
ro.build.display.id=RKQ1.201022.002.WW_Phone-18.0840.2107.151-0
ro.build.version.incremental=18.0840.2107.151-0
ro.build.version.sdk=30
ro.build.version.preview_sdk=0
ro.build.version.preview_sdk_fingerprint=REL
ro.build.version.codename=REL
ro.build.version.all_codenames=REL
ro.build.version.release=11
ro.build.version.release_or_codename=11
ro.build.version.security_patch=2021-07-05
ro.build.version.base_os=
ro.build.version.min_supported_target_sdk=23
ro.build.date=Tue Aug 17 23:43:46 CST 2021
ro.build.date.utc=1629215026
ro.build.type=user
ro.build.user=android
ro.build.host=mcrd1-19
ro.build.tags=release-keys
ro.build.flavor=qssi-user
ro.build.system_root_image=false
ro.build.epad.project=
[Build] buildinfo.sh : TARGET_SKU=WW
[Build] buildinfo.sh : ASUS_TARGET_PRODUCT=
ro.vendor.build.fota.version=WW_I005D-18.0840.2107.151-0
ro.product.locale.region=
ro.build.software.version=18_0840_2107_151
ro.vendor.build.software.version=18_0840_2107_151
ro.vendor.build.asus.number=18.0840.2107.151-0
ro.vendor.build.asus.version=18.0840.2107.151
ro.build.product=ZS673KS
# ro.product.cpu.abi and ro.product.cpu.abi2 are obsolete,
# use ro.product.cpu.abilist instead.
ro.product.cpu.abi=arm64-v8a
ro.product.cpu.abilist=arm64-v8a,armeabi-v7a,armeabi
ro.product.cpu.abilist32=armeabi-v7a,armeabi
ro.product.cpu.abilist64=arm64-v8a
ro.product.locale=en-US
ro.wifi.channels=
# Do not try to parse thumbprint
# end build properties
#
# from vendor/asus/system.prop
#
#
# system.prop for ZS673KS
#
# add for beta-userstage
ro.vendor.asus.logupload=0
ro.vendor.asus.beta=0
ro.vendor.confidentiality=0
# end of vendor/asus/system.prop
#
# from vendor/asus/ZS673KS/twinapps/twinapps.prop
#
#
# system.prop for TwinApps
#
#ASUS IMS Carol_Hu: https://android-review.googlesource.com/c/platform/build/+/1417451
external_storage.cross_user.enabled=1
# end of vendor/asus/ZS673KS/twinapps/twinapps.prop
#
# from vendor/asus/ZS673KS/system.prop
#
#
# system.prop for ZS673KS
#
#ASUS BSP Wei ++
persist.sys.hardcoder.name=ta_itf
#ASUS BSP Wei --
#ASUS_BSP Jimmy add for vibration intensity ++
ro.vendor.asus.scale_low_max_amp=84
ro.vendor.asus.scale_none_max_amp=168
#ASUS_BSP Jimmy add for vibration intensity --
#ro.vendor.asus.logupload=0
vendor.display.disable_rounded_corner=0
#vendor.display.enable_rounded_corner=1
vendor.perf.workloadclassifier.enable=true
persist.log.tag.CompositionEngine=E
persist.log.tag.FreeReflect=E
persist.log.tag.BeaconStatManager=E
persist.log.tag.DEBUG_CACHE_UPLOAD_PV=E
persist.log.tag.SharedPreferencesImpl=E
persist.log.tag.DiskCacheProducer=E
persist.log.tag.HippyCore=E
persist.log.tag.MultiplexProducer=E
persist.log.tag.DataSource=E
persist.log.tag.AppStore-DownloadManagerService=E
persist.log.tag.AppStore-AppStoreDownloadManager=E
persist.log.tag.AppStore-NetworkPackageRepo=E
persist.log.tag.AppStore-WallpaperManagerService=E
persist.log.tag.AppStore-OkHttp-LL-getRecommendInstallApps=E
persist.log.tag.AppStore-OkHttp-EL-getRecommendInstallApps=E
persist.log.tag.AppStore-OkHttp-EL-getAppUpdateInfo=E
persist.log.tag.AppStore-OkHttp-LL-getAppUpdateInfo=E
persist.log.tag.AppStore-OkHttp-EL-getConfigItemData=E
persist.log.tag.AppStore-OkHttp-LL-getConfigItemData=E
persist.log.tag.AppStore-OkHttp-EL-getValidPreDownloadPkgs=E
persist.log.tag.AppStore-OkHttp-LL-getValidPreDownloadPkgs=E
persist.log.tag.AppStore-AppStoreDownloadManager=E
persist.log.tag.AppStore-OrderServiceManager=E
persist.log.tag.AppStore-NetworkSwitch=E
persist.log.tag.AppStore-OkHttp-LL-getGameConfig=E
persist.log.tag.AppStore-OkHttp-EL-getGameConfig=E
persist.log.tag.AppStore-OkHttp-EL-getPublicAppByPkgNameList=E
persist.log.tag.AppStore-OkHttp-LL-getPublicAppByPkgNameList=E
persist.log.tag.ANDR-PERF-LM=E
persist.log.tag.QC2C2DEngine=E
persist.log.tag.skia=E
persist.log.tag.GCloud=E
persist.log.tag.threaded_app=E
persist.log.tag.BatteryStatsImpl=E
persist.log.tag.NotificationFilter=E
persist.log.tag.SystemProperties=E
persist.log.tag.BufferQueueProducer=E
# end of vendor/asus/ZS673KS/system.prop
#
# from device/qcom/qssi/system.prop
#
#
# system.prop for qssi
#
rild.libpath=/vendor/lib64/libril-qc-hal-qmi.so
#rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
ril.subscription.types=RUIM,RUIM
DEVICE_PROVISIONED=1
# Set network mode to (NR_LTE_TDSCDMA_CDMA_EVDO_GSM_WCDMA, NR_LTE_TDSCDMA_CDMA_EVDO_GSM_WCDMA) for 8+8 mode device on DSDS mode
#ro.telephony.default_network=33,33
dalvik.vm.heapsize=36m
dev.pm.dyn_samplingrate=1
#ro.hdmi.enable=true
#persist.speaker.prot.enable=false
qcom.hw.aac.encoder=true
#
# system props for the cne module
#
persist.vendor.cne.feature=1
#system props for the MM modules
media.stagefright.enable-player=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-fma2dp=true
media.stagefright.enable-scan=true
media.stagefright.thumbnail.prefer_hw_codecs=true
mmp.enable.3g2=true
media.aac_51_output_enabled=true
media.settings.xml=/vendor/etc/media_profiles_vendor.xml
#16777215 is decimal sum of supported codecs in AAL
#codecs:(PARSER_)AAC AC3 AMR_NB AMR_WB ASF AVI DTS FLV 3GP 3G2 MKV MP2PS MP2TS MP3 OGG QCP WAV FLAC AIFF APE DSD MOV MHAS
vendor.mm.enable.qcom_parser=12451582
persist.mm.enable.prefetch=true
#
# system props for the data modules
#
ro.vendor.use_data_netmgrd=true
persist.vendor.data.mode=concurrent
#system props for time-services
persist.timed.enable=true
#
# System props for telephony
# System prop to turn on CdmaLTEPhone always
telephony.lteOnCdmaDevice=1
#Simulate sdcard on /data/media
#
persist.fuse_sdcard=true
#System props for BT
ro.bluetooth.library_name=libbluetooth_qti.so
persist.vendor.btstack.aac_frm_ctl.enabled=true
persist.bluetooth.avrcpversion=avrcp16
persist.vendor.btstack.enable.twsplus=true
persist.vendor.btstack.enable.twsplussho=true
# ASUS BSP Bluetooth: disable SWB
persist.vendor.qcom.bluetooth.enable.swb=false
persist.vendor.qcom.bluetooth.enable.swbpm=false
#system prop for RmNet Data
persist.rmnet.data.enable=true
persist.data.wda.enable=true
persist.data.df.dl_mode=5
persist.data.df.ul_mode=5
persist.data.df.agg.dl_pkt=10
persist.data.df.agg.dl_size=4096
persist.data.df.mux_count=8
persist.data.df.iwlan_mux=9
persist.data.df.dev_name=rmnet_usb0
#property to enable user to access Google WFD settings
persist.debug.wfd.enable=1
##property to choose between virtual/external wfd display
persist.sys.wfd.virtual=0
#property to enable HWC for VDS
debug.sf.enable_hwc_vds=1
#property to latch unsignaled buffer
debug.sf.latch_unsignaled=1
# enable tunnel encoding for amrwb
tunnel.audio.encode = true
#enable voice path for PCM VoIP by default
use.voice.path.for.pcm.voip=true
# system prop for NFC DT
ro.nfc.port=I2C
#initialize QCA1530 detection
sys.qca1530=detect
#Enable stm events
persist.debug.coresight.config=stm-events
#hwui properties
ro.hwui.texture_cache_size=72
ro.hwui.layer_cache_size=48
ro.hwui.r_buffer_cache_size=8
ro.hwui.path_cache_size=32
ro.hwui.gradient_cache_size=1
ro.hwui.drop_shadow_cache_size=6
ro.hwui.texture_cache_flushrate=0.4
ro.hwui.text_small_cache_width=1024
ro.hwui.text_small_cache_height=1024
ro.hwui.text_large_cache_width=2048
ro.hwui.text_large_cache_height=1024
config.disable_rtt=true
#Bringup properties
persist.sys.force_sw_gles=1
persist.vendor.radio.atfwd.start=true
ro.kernel.qemu.gles=0
qemu.hw.mainkeys=0
# ASUS_BSP "Enable IOT logging"+++
persist.vendor.service.bt.iotinfo.report.enable=true
# ASUS_BSP "Enable IOT logging"---
#Expose aux camera for below packages
vendor.camera.aux.packagelist=org.codeaurora.snapcam
#enable IZat OptInApp overlay
persist.vendor.overlay.izat.optin=rro
# Property for backup NTP Server
persist.backup.ntpServer="0.pool.ntp.org"
#Property to enable Mag filter
persist.vendor.sensors.enable.mag_filter=true
#Partition source order for Product/Build properties pickup.
ro.product.property_source_order=odm,vendor,product,system_ext,system
#Property to enable Codec2 for audio and OMX for Video
debug.stagefright.ccodec=1
#Property to set native recorder's maximum base layer fps
ro.media.recorder-max-base-layer-fps = 60
#Battery Property
ro.charger.enable_suspend = 1
# ASUS_BSP +++
persist.vendor.asus.logcat.filenum=20
# property for csclogtool
logtool.package=com.asus.csclogtool
logtool.class=com.asus.csclogtool.LogService
ro.asus.rog=1
# ASUS_BSP ---
# jack for default log flag
persist.vendor.asus.startlog=0
persist.vendor.sys.downloadmode.enable=0
# ASUS_BSP ---
# ASUS_BSP "Enable IOT logging"+++
persist.vendor.service.bt.iotinfo.report.enable=true
# ASUS_BSP "Enable IOT logging"---
# [ASUS BSP] for Poweroff Alarm Support
ro.vendor.asus.poweroffalarm_support=1
# ASUS_BSP AustinT "FP wakeup property"+++
persist.vendor.asus.fp.wakeup_support=true
persist.vendor.asus.fp.wakeup=false
# ASUS_BSP AustinT "FP wakeup property"---
# ASUS_BSP AustinC Dirac +++
ro.vendor.dirac.acs.controller=gef
ro.vendor.dirac.acs.storeSettings=1
ro.vendor.dirac.acs.ignore_error=0
ro.vendor.dirac.gef.int.did=0xF,0x313,0x2C4
ro.vendor.dirac.gef.ext.did=0xA,0x2D,0x14,0x2C7,0x2C9,0x1F7
ro.vendor.dirac.gef.int.tid=0x10012D00
ro.vendor.dirac.gef.int.mid=0x10012DE0
ro.vendor.dirac.gef.ext.mid=0x10012DE1
ro.vendor.dirac.gef.system_sound=1
ro.vendor.dirac.gef.ins.tid=0x10012D02
ro.vendor.dirac.gef.ins.mid=0x10012DE2
ro.vendor.dirac.gef.ins.did=0xF,0x313,0x2C4
ro.vendor.dirac.gef.ins.appt=0x00011131
ro.vendor.dirac.config=16
ro.vendor.dirac.acs.rotation=true
# ASUS_BSP AustinC Dirac ---
# ASUS_BSP AustinC +++
log.tag.APM_AudioPolicyManager=V
# ASUS_BSP AustinC ---
#ASUS_BSP : Anakin use ACCY generation 5
vendor.asus.accy_gen=5
# end of device/qcom/qssi/system.prop
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.treble.enabled=true
ro.vendor.build.asus.sku=WW
vendor.camera.asus.system=1
vendor.camera.expTimeMax=0
vendor.camera.cam6.crop_region=2:0,0,4160,3120;4:828,621,3332,2499
vendor.camera.preview_beauty=4:1;1:1;2:1;3:1;5:1;6:1
vendor.camera.preview_portrait=4:0;1:1;2:0;3:0
[email protected],[email protected],[email protected]
[email protected],[email protected]
[email protected],[email protected],[email protected]
[email protected],[email protected]
[email protected],[email protected],[email protected]
vendor.camera.dual_bokeh=4:0;1:0;2:0;3:0;5:1
vendor.camera.lens_type=4:standard;1:standard;2:wide-angle;3:macro;5:virtual;6:sat
vendor.camera.use_frame_processor=0
vendor.camera.ai_scene_mode=4:1;1:1;2:1;3:1;6:1
vendor.camera.undistortion.preview=4:0;1:0;2:1;3:0;6:1
vendor.camera.undistortion.video=4:0;1:0;2:0;3:0
vendor.camera.capture.override_max_digital_zoom=4:8;1:8
vendor.camera.cam4.stream_list=1P/2Y/1J
vendor.camera.cam1.stream_list=1P/2Y/1J
vendor.camera.cam4.exposure_time_range=100000,32000000000
vendor.camera.cam1.exposure_time_range=100000,32000000000
vendor.camera.cam2.exposure_time_range=100000,16000000000
vendor.camera.cam3.exposure_time_range=100000,16000000000
[email protected],[email protected],[email protected],[email protected]
[email protected],[email protected],[email protected],[email protected],[email protected],[email protected]
[email protected],[email protected],[email protected]
[email protected],[email protected],[email protected],[email protected]
[email protected],[email protected]
[email protected],[email protected],[email protected],[email protected],[email protected],[email protected]
vendor.camera.fovc=0:0;1:0;2:0;3:0;4:1;5:0;6:0
vendor.camera.night=4:1;1:0;2:1;3:0;6:1
vendor.camera.aux.packagelist=org.codeaurora.snapcam,android,com.android.systemui
net.bt.name=Android
ro.vendor.qti.va_aosp.support=1
Click to expand...
Click to collapse
Because I don't have device, I need someone to test it. Currently it was tested only on ROG Phone 5S. I sent it to one guy who has ROG Phone 5, when he will tell me that it works, I will upload build here.
mikalovtch said:
Because I don't have device, I need someone to test it. Currently it was tested only on ROG Phone 5S. I sent it to one guy who has ROG Phone 5, when he will tell me that it works, I will upload build here.
Click to expand...
Click to collapse
Oh ok. Good luck.
twistedumbrella said:
Oh ok. Good luck.
Click to expand...
Click to collapse
Published but at the moment there is issue with decryption /data on ROG Phone 5.
mikalovtch said:
Published but at the moment there is issue with decryption /data on ROG Phone 5.
Click to expand...
Click to collapse
Thanks for the update. I know people have been asking for TWRP.
will viper4android work if using twrp?
Thanks for doing this! Really appreciate all the time you guys spent getting this to work!
New build is online​The new version supports ROG 5 and ROG 5S in one image. Also there is fix for data decryption. Download link is in the first post.
Thanks @Qtr1st, @Freak07 and @danfrid for testing it on their devices.
Hi, just installed twrp, and boots into it first time, but if I restart the recovery it reverts back to the original version. Am I missing something?
I'm using the tencent version with ww rom
Madbullben said:
Hi, just installed twrp, and boots into it first time, but if I restart the recovery it reverts back to the original version. Am I missing something?
I'm using the tencent version with ww rom
Click to expand...
Click to collapse
Did you actually install it or just boot into it? Once you are in twrp, you have to use twrp to install the recovery img. fastboot boot twrp.img only boots from the image, it doesn't install it.
TiklMiPickles said:
Did you actually install it or just boot into it? Once you are in twrp, you have to use twrp to install the recovery img. fastboot boot twrp.img only boots from the image, it doesn't install it.
Click to expand...
Click to collapse
I just booted into it, I hadn't done twrp for a while and forgot that it needed to be installed as well.
Do we have the other file or do we use the normal twrp.img and place on to our phone and flash it within twrp?
Madbullben said:
Hi, just installed twrp, and boots into it first time, but if I restart the recovery it reverts back to the original version. Am I missing something?
I'm using the tencent version with ww rom
Click to expand...
Click to collapse
NVM, I can't even get 'fastboot boot twrp.img' to work, so I obviously don't know what I'm talking about. The fastboot command doesn't see my phone in bootloader mode, then when I go into fastbootd like I did to root, it doesn't have the 'boot' command.
Madbullben said:
I just booted into it, I hadn't done twrp for a while and forgot that it needed to be installed as well.
Do we have the other file or do we use the normal twrp.img and place on to our phone and flash it within twrp?
Click to expand...
Click to collapse
You can just install the .img file usually. How did you manage to get fastboot to use the boot command? I'm plugged into the side port, but in the fastboot mode, it doesn't have the boot command, then in the bootloader mode fastboot doesn't see the phone at all.
TiklMiPickles said:
NVM, I can't even get 'fastboot boot twrp.img' to work, so I obviously don't know what I'm talking about. The fastboot command doesn't see my phone in bootloader mode, then when I go into fastbootd like I did to root, it doesn't have the 'boot' command.
Click to expand...
Click to collapse
Edit: reloaded the page before the second post.
TiklMiPickles said:
You can just install the .img file usually. How did you manage to get fastboot to use the boot command? I'm plugged into the side port, but in the fastboot mode, it doesn't have the boot command, then in the bootloader mode fastboot doesn't see the phone at all.
Click to expand...
Click to collapse
Do you have USB debugging on and allowed the computer to use it? Otherwise I'm not too sure.
Turned on USB debugging, plugged my phone into the side port, allowed pc to use it when the popup came up, then followed the instructions.
Also just learned that if you flash the twrp. Img when you first do it it'll replace the system so don't do that.
Madbullben said:
Do you have USB debugging on and allowed the computer to use it? Otherwise I'm not too sure.
Turned on USB debugging, plugged my phone into the side port, allowed pc to use it when the popup came up, then followed the instructions.
Also just learned that if you flash the twrp. Img when you first do it it'll replace the system so don't do that.
Click to expand...
Click to collapse
Yes and yes, tried on both my personal and work computer. Tried using both universal drivers and the drivers released by Asus specifically. Unless I'm in fastbootd mode, 'fastboot devices' comes back empty. Super weird.
Figured it out. It was a faulty driver that worked in fastbootd mode but not the bootloader for whatever reason. Manually updated the drivers in device manager and it all works now.

What version should be used ?

Greetings, I would like an orientation,i am trying to develop a rom,for this device: zte nubia z5s mini nx406e
which version of: android kitchen (rom development tool), can be used to work a device with android version 4.4.4
the technical specifications extracted from the archive: [build.prop]
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=KTU84P
ro.build.display.id=NX406E_VE_V1.01
ro.build.internal.id=NX406E_Z23_ES_JSONK1HD00H110
ro.build.version.incremental=eng.nubia.20150422.172024
ro.build.version.sdk=19
ro.build.version.codename=REL
ro.build.version.release=4.4.4
ro.build.date=2015年 04月 22日 星期三 17:22:24 CST
ro.build.date.utc=1429694544
ro.build.type=user
ro.build.user=nubia
ro.build.host=swlab-1t189
ro.build.tags=release-keys
ro.product.model=NX406E
ro.product.brand=zte
ro.product.name=NX406E
ro.product.device=NX406E
ro.product.board=msm8916
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=zte
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=msm8916
# ro.build.product is obsolete; use ro.product.device
ro.build.product=NX406E
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=NX406E-user 4.4.4 KTU84P eng.nubia.20150422.172024 release-keys
ro.build.fingerprint=zte/NX406E/NX406E:4.4.4/KTU84P/eng.nubia.20150422.172024:user/release-keys
ro.build.characteristics=default
# end build properties
#
# from device/zte/NX406E/system.prop
#
#
# system.prop for msm8916
#
#rild.libpath=/system/lib/libreference-ril.so
rild.libpath=/system/vendor/lib/libril-qc-qmi-1.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
ril.subscription.types=NV,RUIM
DEVICE_PROVISIONED=1
# Start in cdma mode
ro.telephony.default_network=5
debug.sf.hw=1
debug.egl.hw=1
debug.composition.type=c2d
persist.hwc.mdpcomp.enable=true
debug.mdpcomp.logs=0
dalvik.vm.heapsize=36m
dev.pm.dyn_samplingrate=1
persist.demo.hdmirotationlock=false
#ro.hdmi.enable=true
#tunnel.decode=true
#tunnel.audiovideo.decode=true
#lpa.decode=false
#lpa.use-stagefright=true
#persist.speaker.prot.enable=false
#
# system props for the cne module
#
persist.cne.feature=4
#
# system props for the dpm module
#
persist.dpm.feature=0
#system props for the MM modules
media.stagefright.enable-player=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-fma2dp=true
media.stagefright.enable-scan=true
mmp.enable.3g2=true
mm.enable.smoothstreaming=true
mm.disable.sec_smoothstreaming=true
media.aac_51_output_enabled=true
#codecsPARSER_)AAC AC3 AMR_NB AMR_WB ASF AVI DTS 3GP 3G2 MKV MP2PS MP2TS MP3 OGG QCP WAV FLAC DIVX DIVXHD
mm.enable.qcom_parser=3407743
#
# system props for the data modules
#
ro.use_data_netmgrd=true
persist.data.netmgrd.qos.enable=true
#system props for time-services
persist.timed.enable=true
#
# system prop for opengles version
#
# 196608 is decimal for 0x30000 to report version 3
ro.opengles.version=196608
# System property for cabl
ro.qualcomm.cabl=0
#
# System props for telephony
# System prop to turn on CdmaLTEPhone always
telephony.lteOnCdmaDevice=1
persist.omh.enabled=false
#
# System props for bluetooh
# System prop to turn on hfp client
bluetooth.hfp.client=1
#Simulate sdcard on /data/media
#
persist.fuse_sdcard=false
#
#snapdragon value add features
#
ro.qc.sdk.audio.ssr=false
##fluencetype can be "fluence" or "fluencepro" or "none"
ro.qc.sdk.audio.fluencetype=fluence
persist.audio.fluence.voicecall=true
persist.audio.fluence.voicerec=false
persist.audio.fluence.speaker=true
#Set for msm8916
tunnel.audio.encode = false
#Buffer size in kbytes for compress offload playback
audio.offload.buffer.size.kb=32
persist.factory.mic_number=13
#Enable offload audio video playback by default
av.offload.enable=false
#enable voice path for PCM VoIP by default
use.voice.path.for.pcm.voip=true
#
#System property for FM transmitter
#
ro.fm.transmitter=false
#enable dsp gapless mode by default
audio.offload.gapless.enabled=true
#Audio voice concurrency related flags
voice.playback.conc.disabled=true
voice.record.conc.disabled=true
voice.voip.conc.disabled=true
#Set composition for USB
persist.sys.usb.config=diag,mass_storage,adb
#Set read only default composition for USB
ro.sys.usb.default.config=diag,serial_smd,rmnet_bam,adb
# set max background services
ro.config.max_starting_bg=8
#property to enable user to access Google WFD settings
persist.debug.wfd.enable=1
#propery to enable VDS WFD solution
#property to set wfd wifi direct wps setup defalut type is keypad(0) / pbc(1)
persist.sys.wfd.wpssetup.type=1
#property to set wfd output resolution is 1080P(0) / 720P(1) / 960*540(2) / 800*480(3)
persist.sys.wfd.zte_resolution=2
#property to show wfd sink false(0) / true(1)
persist.sys.wfd.zsink_support=1
#property this is device support wfd 1080p output support(true) not support(false)
persist.sys.wfd.1080p_support=false
persist.hwc.enable_vds=1
ro.min_freq=800000
#PPPOE config enable
ro.config.pppoe_enable=1
#persist.radio.multisim.config=dsds
#custom for ve
persist.always.persist.locale = true
persist.sys.language = es
persist.sys.country = ES
ro.com.android.dateformat=dd-MM-yyyy
persist.sys.timezone = America/Caracas
# Added by Song LinHua 2014.08.28 begin
# 1 : restart system
# 3 : restart the related subsystem only
persist.sys.ssr.restart_level=1
# 0: restart the system normally
# 1: restart the system to download mode for dump
persist.sys.ap.restart_level=1
# Added by Song LinHua 2014.08.28 end
persist.gallery.drm=1
# Added by tengxianghui for nubiaposter
# type can be "chinese" or "english" or "spanish"
persist.nubiaposter.type=spanish
#
# ADDITIONAL_BUILD_PROPERTIES
#
dalvik.vm.heapgrowthlimit=128m
keyguard.no_require_sim=true
ro.com.android.dataroaming=false
ro.com.android.dateformat=MM-dd-yyyy
ro.config.ringtone=Latinoamerica.mp3
ro.config.notification_sound=Jingle.ogg
ro.config.message_sound=magic_bell.ogg
ro.config.alarm_alert=peaceful_wave.ogg
ro.carrier=unknown
ro.vendor.extension_library=/vendor/lib/libqc-opt.so
persist.radio.apm_sim_not_pwdn=1
dalvik.vm.heapstartsize=8m
dalvik.vm.heapsize=256m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=2m
dalvik.vm.heapmaxfree=8m
persist.sys.logkit.ctrlcode=1
ro.build.rom.internal.id=V2.6.2.5
ro.build.nubia.rom.code=V2.5
ro.build.nubia.rom.name=nubiaUI
ro.nubia.haptics.default=30,22,30,22,22,30,38,22,30,22,50,40
ro.nubia_default_inputmethod=com.android.inputmethod.latin/.LatinIME
drm.service.enabled=true
persist.factory.keypad_type=standard_with_camera_with_focus
persist.factory.receiver_volume=10
persist.factory.loopback_volume=12
ro.setupwizard.mode=OPTIONAL
ro.com.google.gmsversion=4.4.4_r6
ro.com.google.clientidbase=android-zte
ro.com.google.clientidbase.ms=android-zte
ro.com.google.clientidbase.am=android-zte
ro.com.google.clientidbase.gmm=android-zte
ro.com.google.clientidbase.yt=android-zte
ro.build.rom.id=V2.6.0
persist.sys.power.sound=1
audio.effect.name=srs
audio.offload.disable=1
persist.factory.otg=false
ro.adb.secure=1
persist.factory.nfc=false
ro.build.audio.internal.id=V1.0.5
persist.sys.dalvik.vm.lib=libdvm.so
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
persist.gps.qc_nlp_in_use=1
persist.loc.nlp_name=com.qualcomm.services.location
ro.gps.agps_provider=1
ro.pip.gated=0
persist.radio.calls.on.ims=0
persist.radio.jbims=0
persist.radio.csvt.enabled=false
persist.radio.custom_ecc=1
persist.radio.rat_on=combine
persist.radio.mt_sms_ack=20
#
# Properties to overwrite (Default)
#
# disable "keep SIM alive" in LPM feature
persist.radio.apm_sim_not_pwdn=1
# enable restoring mode_pref when manual select network with rat
persist.radio.restore_mode_pref=1
persist.env.c.phone.matchnum=11
ro.sf.lcd_density=320
Click to expand...
Click to collapse
received android operating system update to 4.4.4, my intention is to update your OS to version 6 or if possible, a superior Android OS.
I understand that it should be used:
penjdk-7-jdk -> for Android 4,5 y 6.
openjdk-8-jdk -> for Android 7,8 y 9.
which Android SDK version should I download, in order to use the correct versions of: adb, fastboot and systrace.
for to be able to extract the images and the sources from there, and so I can work to update it.
excuse my bad English.
information that I am collecting:​SDK Platform Release Notes: here​Android 4.4 (nivel de API 19): here​For details about the platform changes, see the KitKat overview and Android 4.4 API changes.
Revision 2 (December 2013)​Maintenance release. The system version is 4.4.2. For more information, see the Android 4.4 API Overview.
Dependencies: Android SDK Platform-tools r19 or higher is required. Android SDK Tools 22.3 or higher is recommended.
Android Studio release notes : Here
Android Studio :
Versión 1.x ------------> JDK version -> Java Development Kit (JDK) 7 o superior
Versión 2.x and 3.x -> Java version ->Java Development Kit (JDK) 8
geoeducativa said:
Greetings, I would like an orientation,i am trying to develop a rom,for this device: zte nubia z5s mini nx406e
which version of: android kitchen (rom development tool), can be used to work a device with android version 4.4.4
the technical specifications extracted from the archive: [build.prop]
received android operating system update to 4.4.4, my intention is to update your OS to version 6 or if possible, a superior Android OS.
I understand that it should be used:
penjdk-7-jdk -> for Android 4,5 y 6.
openjdk-8-jdk -> for Android 7,8 y 9.
which Android SDK version should I download, in order to use the correct versions of: adb, fastboot and systrace.
for to be able to extract the images and the sources from there, and so I can work to update it.
excuse my bad English.
Click to expand...
Click to collapse
Thanks to this: ro.build.version.sdk = 19,
I understood that this version should be used: Android 4.4 (API level 19)
uses-sdk
SDK Platform release notes
SDK Platform Tools release notes

Categories

Resources