Hi,
I'm giving my old Moto G to my brother, so I need to remove root and install stock firmware, as the sim unlock code does not work on the custom firmware. I can easily install the stock 5.1 lollipop EU rom, but then when I try to install the stock firmware (I'm pretty sure it's O2, but I've tried both O2 firmware as well as the Retail GB) it gets stuck on the bootloader unlocked screen. It's still there after ~30 minutes, so I'm fairly certain that it's crashing.
Does anybody know what's going on, or potentially have any fixes? There are no errors when flashing the firmware, and I've triple checked that I've got the correct firmware version.
Thanks.
Related
Hello,
For the better part of this evening I have been trying to flash Telus Moto G with a different ROM. I even unlocked the bootloader, but to no avail.
I keep getting the following errors when trying to flash bootloader, recovery and system:
hab check failed for boot
hab check failed for recovery
invalid PIV signed system image
(when trying to flash a ROM with three sparsechunks, sparsechunk.0 gives the error, two remaining flash correctly, the phone boots, but the phone is unusable (most of the menus and stuff is just not there)
I have tried GPE, same thing (wouldn't even boot).
Only thing that always works is flashing Telus firmware.
Is there ANY way to bypass this limitation?
Please help me!
same for me bro. I tried US retail and it didnt work. I didnt unlock bootloader so I went back to the telus one.
I dont get why you cant get it in if you unlock bootloader
anyways, I doubt there is a difference between these stock rooms. just saying..
There is a fundamental difference in that Telus version only has a few system languages, and doesn't have the ones I need.
could you root it, install cwm and than install custom rom?
Yes, I've finally managed to flash CWM and Cyanogenmod. Thanks for the tips!
Flintberg said:
Yes, I've finally managed to flash CWM and Cyanogenmod. Thanks for the tips!
Click to expand...
Click to collapse
Sweet! Good to hear.
Anyone found a way to install non-Telus stock FW or GPE on a Telus Moto G in the meantime? It appears Moto G losdt CM support, so I would like to get back to stock - but Telus version is not acceptable.
Flintberg said:
Anyone found a way to install non-Telus stock FW or GPE on a Telus Moto G in the meantime? It appears Moto G losdt CM support, so I would like to get back to stock - but Telus version is not acceptable.
Click to expand...
Click to collapse
I've tried flashing the US and GB retail with no success. The result of the effort was a loss of radio antenna with no network connection. Flashing the Telus firmware repaired the antenna issue with no errors when flashing all the files. The issue seems to be the bootloader and leaves me wondering if it needs to be unlocked. I'm not desperate to have a retail version that I'm willing to void the warranty by unlocking the bootloader.
Hello,
Just bought a topaz blue unlocked S6. I think it came from an Asian country. The phone arrived perfectly with plastic in box with the same IMEI as phone. However it was rooted with SU. I went into the app and clicked to remove root. It was on 5.0.2. They I tried to flash original firmware with Smart Switch with no success.
I used odin to flash stock 5.1.1 firmware from the UK. The firmware was for 920F. It went all good. I have LTE, SMS and phonecalls. However, sometimes the baseband appears as unknown, but I still can make calls and have LTE. And it still shows the same IMEI as it is on the box and it has always shown it. Is there a way to fix this? Now, I try to flash stock firmware with Smart Switch and it says it can't initialize.
I would REALLY appreciate help. I would love to be able to flash stock firmware from Smart Switch.
I'm in México with Telcel, which uses the same bands as AT&T.
P.S. I really searched and couldn't find anything on my specific situation.
That happened to me when I was still on 5.0.2 and flashed only the 5.1.1 modem. I would suggest downloading the modem.tar file and flash that. Should all be good after that.
I'm currently downloading G920FXXU1AOD4 BTU firmware to flash it with Odin. Might that help me better? My main goal is to be 100% stock without any weirdness. And having Smart Switch recognize my phone!
Well, I'm sad.
calot said:
I'm currently downloading G920FXXU1AOD4 BTU firmware to flash it with Odin. Might that help me better? My main goal is to be 100% stock without any weirdness. And having Smart Switch recognize my phone!
Click to expand...
Click to collapse
You cannot downgrade to 5.0.2 from 5.1.1. Your bootloader will not support. I have the issue with 3G connection. Where to get the Modem.tar?
I recently received a T-Mobile Galaxy S6, and it was rooted and had a custom kernel, which was a complete mess (the person who owned the phone previously clearly did not know what they were doing) so I just wanted to restore it back to full stock.
I am decently experienced with ODIN, rooting, custom firmware etc, but I have just done one of the biggest rookie mistakes I have ever done. I had accidentally downloaded the most recent firmware for my G920T, not realizing that the file was not for T-Mobile. It was the (XAR) carrier (I believe that is C-Spire but i could be wrong) and the latest was PK1.
It flashed perfectly and all seemed fine until I decided to unlock the device. The T-Mobile S6 requires the use of the "Device Unlock" app and since I had flashed the wrong ROM, the phone thinks the Device Unlock app is not compatible. When I put a different GSM SIM card in the phone, it prompts me to use the Device Unlock app.
I do not have a previous NANDROID backup from the original T-Mobile ROM, and now that I am on the lastest Bootloader for XAR, it will not let me downgrade. I have tried flashing pretty much every MM bootloader and TWRP for both T-Mobile and XAR and none will work (except for what is currently on the device of course) I always get the error "Device: 5 Binary: 4" (sometimes the binary is 3, depending on which version of MM rom or BL I try)
To sum it all up, I am on PK1 (latest for XAR) and I need a way to get back to the official T-Mobile ROM (latest is PD1). Is there a magic method to get this figured out or am I pretty much stuck with what I got until T-Mobile releases an update that is PK1 or higher?
Thank you in advance to all of you that take your time to help (and I am sincerely sorry if I am posting in the wrong section)
So both my phone and vzw branded phone are same model, and android 11 firmware is out for verizon and my phone received the G715U1UEU7BUC3 ota 11. Is the latest Odin software and verizon G715USQU7BUC1 firmware what i need to get it done?
Also, do i need to do the full flash or can i get by with just one file that includes all the vzw bloatware. From what ive read i can get by with flashing just the userdata file. Once complete ive also read i need to do a factory reset and that it can be done i DL mode. Is that true? Finally can i leave my sim in for this or should it be out
?
?
Anybody??
Not even a response from Europe where they must hand these xcover pro's out with every gas tank fillup.
I have the latest version of odin installed and downloaded the verizon ota firmware G715USQU7BUC1 and am ready to give it a shot. I would just like a little confirmation im on the right track. Bootloader versions are the same. (bootloader is still locked) Even a grunt would do..........
I tried flashing an Australian (G970FXXS9DTK9) anrdoid 10 firmware but odin wouldn't let me-
phone still works thank goodness. it's on android 11
I thought with an unlocked bootloader I could flash whatever I want as long as it worked for the phone (staying within 970f)
whats happening? how can I flash an english working stock firmware? also can I flash an older firmware or am I still locked somehow from going down or changing country