My meizu mx4 won't turn on after I tried to boot into recovery mode with this apk (signedsignedApkIDE_MX4_Unlock_BL.apk). After I tapped on the "Enter Recovery Mode", my screen turn black and nothing happen. Before this, I've also unlocked my MX4 bootloader with this apk. I've tried holding down the power button and all combination, but it doesn't work. When I plug it to my pc with USB cable, it keep connect and disconnect.
Hello and thanks for using XDA Assist,
A dedicated forum for your device is located here. You can visit Meizu MX Q&A, Help & Troubleshooting and ask your questions there, experts for your device should be able to help you there.
Always read carefully before proceeding.
Good luck,
DC07
Related
Hi,
Sorry 1st of all if my thread is overlapping as i am very confused where to look for help. Ok my problem is my intex phone was in boot loop even after flashing from a shop and i tried to flash stock rom myself but flash tool didnt pick up the connected phone. I did everything in order except backup as i didnt needed any info from the phone.
Intex_Aqua_Power_HD_V06_Indian_SER..//
SP_Flash_Tool_v5.1516
that was the stock rom and flashing tool i downloaded now my desktop Win 10 is displaying that usb device connected is not recognized and
the phone isnt showing any activity on pressing power button, Power button+vol up/down key and nothing on charging.
I will be very grateful if someone can help out.
Hi,
Thanks for writing to us at XDA Assist.
There is no dedicated forum for your device at this time but you may want to ask your question with all relevant details in the friendly general Android Q&A, Help & Troubleshooting forum at http://forum.xda-developers.com/android/help.
Since your device is relatively uncommon, please be patient and give the experts plenty of time to respond.
Help!
I own Intex Aqua 4G+ (Android: 5.0). I was trying to root it last night by first unlocking its bootloader. But I think I flashed a wrong recovery.img file to my phone. After that, it is continuously rebooting. It's battery is non removable so I'm kinda having a hard time switching it off. But I still managed to switch it off somehow. The thing is that I can't enter recovery mode at all. When I boot up device by pressing Power + Vol. up or Vol. down (tried both), it directly takes me to red screen "Hello android", then it flashes like crazy for about 5 seconds there, and then reboot again.
Is this a soft brick, hard brick, what? How can I fix it!
Hi,
Thanks for writing to us at XDA Assist.
There is no dedicated forum for your device at this time but you may want to ask your question with all relevant details in the friendly general Android Q&A, Help & Troubleshooting forum at http://forum.xda-developers.com/android/help.
Since your device is relatively uncommon, please be patient and give the experts plenty of time to respond.
Good luck!
I was going to install a custom ROM on my Coolpad Catalyst android phone, I rooted it, and followed a tutorial on how to flash it.
After attempting to flash my phone with TWRP, when rebooting it gave me a screen saying
"Download and install the package?
This may expose the device to faults and hidden troubles.
Press the Volume Up key to confirm
Press the Volume Down key to concel"
Yes, it is spelled "concel"
upon pressing up or down nothing happens, unless i plug my phone in to a charger then when i press down it reboots to the same screen and if i press up it does nothing at all.
If i try any of the volume+power whatever hotkeys it boots into the same screen aswell. (I tried all of the hotkeys)
When i boot it, it shows the coolpad logo then goes straight to the screen.
Don't know how to fix it, would really love some help
Hello and thank you for using XDA Assist,
please create an account and ask in our Android Q&A section:
Android Q&A, Help & Troubleshooting
The experts there should be able to help you.
Kind regards & good luck
Trafalgar Square
XDA Assist
Hello All,
Well I tried and searched evrything and everywhere before requesting your assistance, please help
I tried to root my new Huwawei P8 Lite, but did something worng (instruction were in spanish...)
now , once i Switch on the phone, it vibrates, displays the logo and then swith off automatically.
I dont have access to fastboot, each time I try
volum down+ Power
volum up + power
Volume up + volume down + power
but oonly the logo diplay, and then phone swith off
I tried out the frameware on the SD card ( of 8 Gb) wit folder Dload on root but when I switch the phone, always the same thing: vibrate, display logo then switch off.
All aother solution require acces to fastboot, but it wont start in my case, other people seem to have same issue but no solution found.
any help (A PC tool maybe to reset the phone...) I searched but i am not an expert couldnt find anything...
so I am counting on your help
Thanks
regards
Hello and thank you for using XDA Assist,
please ask in this section:
Android Q&A, Help & Troubleshooting
The experts there will be able to help you.
Kind regards & good luck
Trafalgar Square
XDA Assist
Hello everyone,
Many thanks for taking the time to read about my problem. I have a ZTE Blade S6 phone and for some reason, it does not bootup properly. I would like to know if it is possible to use ADB commands to copy files from it? Also, what drivers am I missing?
This is the current situation - When I power it on, the ZTE logo shows up with a white background and it is stuck on that forever, I have let it stay that for more than 8 hours and no luck. Have tried the following already:
1. Volume+ and Power button to load into "recovery" mode and tried to wipe cache partition and reset to factot reset - No change and the problem still remains
2. Tried selecting the "bootloader" option, and the screen goes blank. However, on Windows PC it does detect a usb device however I am not sure if it is supposed to show as "Kedacom USB Device" - "Android Bootloader Interface". I tried another Samsung Android device and it does show up on the devices list under the "Android" section.
Could you please help me to restore the Official ROM so that my phone can be used again? ADB command does not seem to detect the device and so I am not sure what I am doing wrong. It will be really helpful to get some advice. Thanks again.
Hello and thank you for using XDA Assist,
please post your question in our Android Q&A section:
Android Q&A, Help & Troubleshooting
The experts there should be able to help you.
Kind regards & good luck
Trafalgar Square
XDA Assist