Related
Hi guys,
Well, after having my P5100 (Samsung G. Tab 2, 10.1) with a stock rom, I've decided to change it for a Cyanogen stable rom, dated of 2013-09-23 19:17:17. Stock rom (4.2.2) was very slow, with lots of lag on it.
I have done everything as the "manual" says, and installed the above mentioned rom. It became more fluid, and more simple. Perfect.
But i am having here an issue, that I don't know how to solve it.
The thing is that I usually read newspapers on my Tab. This works as it follows:
1. we download an app of the newspaper,
2. every time we have a new edition we receive a notification by email, saying that the new issue is available for download;
3. we open the app and start downloading;
4. after downloading, it starts installing the newspaper (since it is a bit interactive and not just a .pdf)
Since I changed to Cyanogen, with the same 4.2.2 as I had on stock rom, when the newspapper installation comes to end, the app simply closes with error. From that moment, I can't even open the app since it simply will close again with error.
Any ideas how to solve this that doesn't require getting back to stock rom?
Many thanks! :good:
QR7 said:
Hi guys,
Well, after having my P5100 (Samsung G. Tab 2, 10.1) with a stock rom, I've decided to change it for a Cyanogen stable rom, dated of 2013-09-23 19:17:17. Stock rom (4.2.2) was very slow, with lots of lag on it.
I have done everything as the "manual" says, and installed the above mentioned rom. It became more fluid, and more simple. Perfect.
But i am having here an issue, that I don't know how to solve it.
The thing is that I usually read newspapers on my Tab. This works as it follows:
1. we download an app of the newspaper,
2. every time we have a new edition we receive a notification by email, saying that the new issue is available for download;
3. we open the app and start downloading;
4. after downloading, it starts installing the newspaper (since it is a bit interactive and not just a .pdf)
Since I changed to Cyanogen, with the same 4.2.2 as I had on stock rom, when the newspapper installation comes to end, the app simply closes with error. From that moment, I can't even open the app since it simply will close again with error.
Any ideas how to solve this that doesn't require getting back to stock rom?
Many thanks! :good:
Click to expand...
Click to collapse
try wiping cache in cwm and also cache of newspaper app also
this might help you
aditya rathee said:
try wiping cache in cwm and also cache of newspaper app also
this might help you
Click to expand...
Click to collapse
Ok, I will try that!
Let's see if it works...
Thank you!
Hi there,
I've tried what you suggested, the error still happens.
I really don't know why it runs on Android 4.2.2 stock, and don't on Android 4.2.2 cyanogen.
Thanks anyway. If you remember anything else to suggest, I would appreciate.
QR7 said:
Hi there,
I've tried what you suggested, the error still happens.
I really don't know why it runs on Android 4.2.2 stock, and don't on Android 4.2.2 cyanogen.
Thanks anyway. If you remember anything else to suggest, I would appreciate.
Click to expand...
Click to collapse
yeah why not
some apps dont run in cyno rom where as they run without any problems in stock one
whatsapp is a common example of this bug it give problems in cyanogenmod roms sometimes
try older version of the newspaper app it may run
good luck :good::good:
Hi to everyone. Today I had to flash another kernel on cm10.1.3 because the one I was previously using caused a lot of problems on asphalt 8. So, I flashed version 2.1.6 of Next kernel by black hawk. On cm11 I know you had to flash the proprietary-vendor zip file for camera to work, but when I did that, I got a message saying I would lose root. This was confirmed by the fact that titanium backup could not get such permission. How can I get the camera working again? This is a great, smooth kernel that I don't want to lose.
Anyone?
Please guys, I'd really like to know how to fix this
Hi
After rooting my phone using Kingo Root, i installed a rom from Sammobile.com (T111XXUANH3_T111OLBANH2)
The problem is, the installation did not make my phone better. All applications started to
crash (force close) especially Facebook, Whatsapp and messaging.
The crash occured in regular basis everytime i used some functions in the apps. The warning message says: " ...... has stopped". I can not even send sms anymore since it was always crashed seconds after writing the message.
I have done all of these steps suggested in many forums but they did not work:
1. Wipe partition and cache in recovery mode
2. Delete data and cache of the apps
3. Fix permissions in apps to fix their UIDs (i used fix permission app downloaded from google play store)
My questions are:
1. What is the best installer app to install ROM from computer?
2. What is the best ROM for Samsung Galaxy Tab 3 Lite SM-T111?
3. When installing the ROM, Does it install the new kernel as well?
I'm still new in Android rooting and i don't have much knowledge about installing a new rom properly including its Kernel. Please help me to restore my phone's functions back to normal.
Thank you in advance.
robw7 said:
Hi
After rooting my phone using Kingo Root, i installed a custom rom from Sammobile.com (T111XXUANH3_T111OLBANH2)
The problem is, the installation did not make my phone better. All applications started to
crash (force close) especially Facebook, Whatsapp and messaging.
The crash occured in regular basis everytime i used some functions in the apps. The warning message says: " ...... has stopped". I can not even send sms anymore since it was always crashed seconds after writing the message.
I have done all of these steps suggested in many forums but they did not work:
1. Wipe partition and cache in recovery mode
2. Delete data and cache of the apps
3. Fix permissions in apps to fix their UIDs (i used fix permission app downloaded from google play store)
My questions are:
1. What is the best installer app to install ROM from computer?
2. What is the best ROM for Samsung Galaxy Tab 3 Lite SM-T111?
3. When installing the ROM, Does it install the new kernel as well?
I'm still new in Android rooting and i don't have much knowledge about installing a new rom properly including its Kernel. Please help me to restore my phone's functions back to normal.
Thank you in advance.
Click to expand...
Click to collapse
If you're installing a stock ROM use ODIN always if its a Samsung device, if it's a custom ROM use a custom recovery like CWM or TWRP.
When installing a custom ROM it will install a new kernel most of the time (Very rare when a ROM doesn't contain a kernel and it's always custom ROMS). A stock ROM will always contain a new kernel.
Finally there is no such thing as a "best" ROM, everyone has a personal preference but to get you started I would recommend trying out CM11, Paranoid Android or PAC-ROM as these have a nice stock feel whilst containing useful tweaks.
To restore your phone to stock just download the stock firmware from SAM Mobile and flash using ODIN and select the PDA file in the PDA button area and then flash
TechMinerUK said:
If you're installing a stock ROM use ODIN always if its a Samsung device, if it's a custom ROM use a custom recovery like CWM or TWRP.
When installing a custom ROM it will install a new kernel most of the time (Very rare when a ROM doesn't contain a kernel and it's always custom ROMS). A stock ROM will always contain a new kernel.
Finally there is no such thing as a "best" ROM, everyone has a personal preference but to get you started I would recommend trying out CM11, Paranoid Android or PAC-ROM as these have a nice stock feel whilst containing useful tweaks.
To restore your phone to stock just download the stock firmware from SAM Mobile and flash using ODIN and select the PDA file in the PDA button area and then flash
Click to expand...
Click to collapse
Thank you for your reply but can i just replace my current ROM with correct custom ROM that will not make my phone crashed? I have installed the stock firmware but it did not make my phone any better.
I have also installed dr ketan custom ROM but still the phone functions not working properly. All apps crashed after only a few seconds opened and sub menu can not be accessed.
I wish someone can help me fix this because i have only one phone i use for work.
Sorry about my English and wrong term i use.
robw7 said:
Thank you for your reply but can i just replace my current ROM with correct custom ROM that will not make my phone crashed? I have installed the stock firmware but it did not make my phone any better.
I have also installed dr ketan custom ROM but still the phone functions not working properly. All apps crashed after only a few seconds opened and sub menu can not be accessed.
I wish someone can help me fix this because i have only one phone i use for work.
Sorry about my English and wrong term i use.
Click to expand...
Click to collapse
If you have the correct custom recovery installed and the correct custom ROM on an SD card sure you can replace the current one
using kingo withot issues
no offence but using kingo from last 20 days, typing fm same 111 tab, but no isssues, not installed cwm,twrp(actally thry r giving only bootloops) hense stock recovrry 4 now, so apps who depends upon cwm.... cant run
major problem cant write SYSTEM PARTITION.
help please. the camera works fine with stock roms, but since I flashed DU official 8.1, any intention to take a photo (regardless of camera app) makes the screen freeze (not force close, it just freezes while generating the photo, and the save animation does not play, and no photo is created ) except for the nav bar back and home buttons. this happens with every custom roms I have tried after the first event. I used to think it was a matter of DU rom, but it also happens with mokee, pa, liquidsmooth, mahdi, spirit and pac. I have tried several solutions like flashing cam libs, stock cam apps, reflashing custom rom, flashing custom kernels, but the only method that makes camera apps work again is flashing stock roms through fastboot. I have an xt1032. it only happens with the back camera, photos taken with the front camera are saved as usual and the apps don't freeze. please bring a ray of light into my case, I don't know what else to try.
tenjou_89 said:
help please. the camera works fine with stock roms, but since I flashed DU official 8.1, any intention to take a photo (regardless of camera app) makes the screen freeze (not force close, it just freezes while generating the photo, and the save animation does not play, and no photo is created ) except for the nav bar back and home buttons. this happens with every custom roms I have tried after the first event. I used to think it was a matter of DU rom, but it also happens with mokee, pa, liquidsmooth, mahdi, spirit and pac. I have tried several solutions like flashing cam libs, stock cam apps, reflashing custom rom, flashing custom kernels, but the only method that makes camera apps work again is flashing stock roms through fastboot. I have an xt1032. it only happens with the back camera, photos taken with the front camera are saved as usual and the apps don't freeze. please bring a ray of light into my case, I don't know what else to try.
Click to expand...
Click to collapse
Bro really strange error . I am with PAC man ROM latest nightly I never faced any camera bug even pic r great bro just try a clean install and see or try any nice kernel and check
tenjou_89 said:
help please. the camera works fine with stock roms, but since I flashed DU official 8.1, any intention to take a photo (regardless of camera app) makes the screen freeze (not force close, it just freezes while generating the photo, and the save animation does not play, and no photo is created ) except for the nav bar back and home buttons. this happens with every custom roms I have tried after the first event. I used to think it was a matter of DU rom, but it also happens with mokee, pa, liquidsmooth, mahdi, spirit and pac. I have tried several solutions like flashing cam libs, stock cam apps, reflashing custom rom, flashing custom kernels, but the only method that makes camera apps work again is flashing stock roms through fastboot. I have an xt1032. it only happens with the back camera, photos taken with the front camera are saved as usual and the apps don't freeze. please bring a ray of light into my case, I don't know what else to try.
Click to expand...
Click to collapse
Go to dhacker's cyanogenmod thread and search for a zip on the last pages. It flashes the stock camera + libs and everything else needed.
I was going through the same things you are and it worked perfectly
helinhof said:
Go to dhacker's cyanogenmod thread and search for a zip on the last pages. It flashes the stock camera + libs and everything else needed.
I was going through the same things you are and it worked perfectly
Click to expand...
Click to collapse
I have the same problem
I searched the thread you said , and I did not find the zip , you still have it there and could send me ? Thanks!
rogeraugusto_ said:
I have the same problem
I searched the thread you said , and I did not find the zip , you still have it there and could send me ? Thanks!
Click to expand...
Click to collapse
Here you go, just flash this zip
https://docs.google.com/file/d/0B7U5fbfp5U27cDlwdmVzeWRLVzQ/edit?usp=docslist_api
I uploaded it for you and everyone else having this problem. Hope it works
thank you, it seems the camera works for now. it is nice that it now receives updates in spite of using a custom rom. however after flashing this zip, dalvik cache for user apps was wiped (without me performing any wipe) and then the theme engine broke. I can't install any theme apks manually, and if I try to install one from the playstore, I get an error notification and the " uninstall" button becomes "install" again. also, themes installed manually appear to be of 0.00MB. I will reflash my current rom and post the results later.
EDIT: clean reflashed and immediately flashed the cam+libs zip. everything works thanks a lot!!
NOTE 4 sm910f trite qualcom CUSTOM ROM CAMERA FREEZES re
helinhof said:
Here you go, just flash this zip
https://docs.google.com/file/d/0B7U5fbfp5U27cDlwdmVzeWRLVzQ/edit?usp=docslist_api
I uploaded it for you and everyone else having this problem. Hope it works
Click to expand...
Click to collapse
...................................................................................................................................................
Newbie here.. note 4 sm910F quacom 6.01 then root twrp and res remix 16, sometimes, not allways, camera freezes. take batt out restart and ok again. Any help to sort out really appreciated. Remix takes about 50 seconds to load from cold start.
---------- Post added at 02:27 PM ---------- Previous post was at 02:24 PM ----------
gwm121 said:
...................................................................................................................................................
Newbie here.. note 4 sm910F quacom 6.01 then root twrp and res remix 16, sometimes, not allways, camera freezes. take batt out restart and ok again. Any help to sort out really appreciated. Remix takes about 50 seconds to load from cold start.
Click to expand...
Click to collapse
If I cant sort the camera out Anyone know how I can flash a copy of the stock 6.01 with twrp or odin, samsung wont let me have a download
First Thing First : I'm not the developer of this ROM. Just Sharing "MY" experience
It's been a long time Mokee builds are available for Mi 4i. I've been using it since 2nd last build (more than 10 days) and currently on latest built i.e. 25th Jan 2016. And I can say that it's Stable.
What's Working :
Everything, except volume rocker keys on earphone.
Highlights:
DT2W
D2TS
Ambient Display
Not even a single FCs or Reboot since installation (more than 10 days now)
CoC is working fine
FB is working fine
More than 24 hours backup (With normal use, NO intensive gaming and ~4 hours SOT)
Installation Instruction (Which I followed, You can go with normal way):
1. Flash MIUI ROM 5.6.11 (I tried to install on 7.1.1, it keep on rebooting. Tried everything, but no luck)
2. Flash TWRP as permanent Recovery
3. Root using SuperSU
4. Wipe everything (but ROM & Gapps Folders)
5. Flash ROM
6. Reboot to System (No need to set-up anything, just do next next)
7. Go to Recovery, Flash Gapps
8. Reboot to system (Again no need to set-up anything, just do next next)
9. Factory Reset (From settings, NOT from recovery)
10. Set-up now
11. Enjoy and All the Best
I know it's painful the way I set-up ROM, but yes I'm not facing any problem at all (Fingers-crossed ). We three colleagues are using it. So it's tested now (you can say)
I've only one phone and I'm using it as a daily driver.
Downloads:
ROM
Gapps : pico version
Enjoy the New ROM guys
this rom is still stuck in LP. was hoping for MM already
ajaxcbcb said:
this rom is still stuck in LP. was hoping for MM already
Click to expand...
Click to collapse
You are very much correct my friend, but again it's a very good alternative for :
1. Those who don't wanna be on MIUI.
2. Struggling to find a CM daily driver.
//TM
good to know. I couldn't take the constant reboot from Remix ROM. Just installed Mokee yesterday. So far so good. Keep my fingers crossed.
getting very high wakelock on *alarms* on any mokee rom
Yeah this is the most stable custom rom for mi4i ...
- official
- update OTA almost every week ..
Can anyone verify if fast dormancy is present in the rom? either through wakelocks or logcat(it should say fast dormancy service or otherwise)
Is ambient display working on this rom?
Hey I am not able to do it. I tried it several times, but every time it says that ERROR IN UPDATER BINARY ZIP.......I am not able to flash it. Help me.
Rajat Naik said:
Is ambient display working on this rom?
Click to expand...
Click to collapse
Yes, Check OP.
xposed support?
lineoxkun said:
xposed support?
Click to expand...
Click to collapse
works, no problem!
imagine92 said:
works, no problem!
Click to expand...
Click to collapse
Nice! Definitely will try this ROM tonight! Thanks OP for sharing [emoji1]
Sent from my MI 4i using Tapatalk
What's your SOT on MIUI 7 with similar type of use?
not happening please help. i tried flashing mokee 5.1 on my mi4i but there are some errors occuring everytime i try to do it. help on this.
sik619 said:
not happening please help. i tried flashing mokee 5.1 on my mi4i but there are some errors occuring everytime i try to do it. help on this.
Click to expand...
Click to collapse
Use twrp 2.8.7
http://forum.xda-developers.com/showthread.php?t=3204594
Is it smooth as any other moto g mobile lolipop version...becoz i always get a feel that miui is laggy..i never install a custom rom before
hey i flashed mokee and the gapps as well...but now its rebooting repeatedly. there comes this screen with welcome and the language but cant click next option..i dont know why. help me
sik619 said:
hey i flashed mokee and the gapps as well...but now its rebooting repeatedly. there comes this screen with welcome and the language but cant click next option..i dont know why. help me
Click to expand...
Click to collapse
I suggest you to use miui 6.6.10.0 glob stable before flash mokee rom