I've patched LGFlashTool.exe to bypass the login screen.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is for flashing back to stock. It does not flash TWRP or root your device.
Also, if anyone has any other information that needs to be added to this let me know so I can include it.
Original LG Flash Tool (thanks @Killua96): https://mega.nz/#!qdATRIRC!g926R6P4WCyVetDknwRgxR4wMyfBl4PDZoxjjZIvDok
@autoprime's LG Flash 2.0.1.6 Installer Repack
Thanks for patching this! It'll be valuable for the life of our devices so we are all grateful that you were able to figure it out.
I've used the FlashTool in the past to restore my LG G3. Are we able to flash individual parts of a TOT or KDZ such as a custom recovery without affecting the other parts like /system?
Didn't @tungkick use a custom TOT to root the V10?
@ieatacid
Just re-upped https://mega.nz/#!qdATRIRC!g926R6P4WCyVetDknwRgxR4wMyfBl4PDZoxjjZIvDok
arjuna) said:
Thanks for patching this! It'll be valuable for the life of our devices so we are all grateful that you were able to figure it out.
I've used the FlashTool in the past to restore my LG G3. Are we able to flash individual parts of a TOT or KDZ such as a custom recovery without affecting the other parts like /system?
Didn't @tungkick use a custom TOT to root the V10?
Click to expand...
Click to collapse
For root permission on marshmallow you need a modified kernel which can boot only if the bootloader is unlocked.
In fact the modified tot on the V10 and the modified system.img on the G4 worked only on Lollipop.
Killua96 said:
@ieatacid
Just re-upped https://mega.nz/#!qdATRIRC!g926R6P4WCyVetDknwRgxR4wMyfBl4PDZoxjjZIvDok
For root permission on marshmallow you need a modified kernel which can boot only if the bootloader is unlocked.
In fact the modified tot on the V10 and the modified system.img on the G4 worked only on Lollipop.
Click to expand...
Click to collapse
On the T-Mobile G5 (H830) we have an unlockable bootloader, however we are unable to flash fastboot commands. Otherwise we would have been the first ones with root in the entire world (we got our phones delivered before almost everyone else).
Can we use this tool to flash a modified kernel?
Edit: for clarification wasn't trying to be annoying or snipe at you; just informing in case you didn't know about our unique situation.
arjuna) said:
On the T-Mobile G5 (H830) we have an unlockable bootloader, however we are unable to flash fastboot commands. Otherwise we would have been the first ones with root in the entire world (we got our phones delivered before almost everyone else).
Can we use this tool to flash a modified kernel?
Edit: for clarification wasn't trying to be annoying or snipe at you; just informing in case you didn't know about our unique situation.
Click to expand...
Click to collapse
The point is, the H830's "unlockable" bootloader is really "unlockable"? If commands don't work maybe the bootloader is still locked, even if it reports "unlocked"
Killua96 said:
The point is, the H830's "unlockable" bootloader is really "unlockable"? If commands don't work maybe the bootloader is still locked, even if it reports "unlocked"
Click to expand...
Click to collapse
You might very well be correct in that we have a "fake" unlockable bootloader. However, when Team Codefire released their video showing Root/TWRP they did so with a T-Mobile G5 leading me to think that they were using an unlocked device. I could be totally wrong but seems like not a stretch that they used that device for that reason.
Is it conceptually possible to use the tool to achieve root. I do not have the expertise or knowledge to know if that's even a possibility.
ieatacid said:
I've patched LGFlashTool.exe to bypass the login screen.
This is for flashing back to stock. It does not flash TWRP or root your device.
Also, if anyone has any other information that needs to be added to this let me know so I can include it.
Original LG Flash Tool (thanks @Killua96): https://mega.nz/#!qdATRIRC!g926R6P4WCyVetDknwRgxR4wMyfBl4PDZoxjjZIvDok
Click to expand...
Click to collapse
Great Job !!!!!
The MAY MAN
arjuna) said:
You might very well be correct in that we have a "fake" unlockable bootloader. However, when Team Codefire released their video showing Root/TWRP they did so with a T-Mobile G5 leading me to think that they were using an unlocked device. I could be totally wrong but seems like not a stretch that they used that device for that reason.
Is it conceptually possible to use the tool to achieve root. I do not have the expertise or knowledge to know if that's even a possibility.
Click to expand...
Click to collapse
I think that team codefire's method don't use the "fake" unlockable bootloader, but maybe some types of exploit like on G2 and G3
add donation button,- your paypal address,
Dear all, do not just say thanks, make a donation for ieatacid,
asialove2013 said:
add donation button,- your paypal address,
Dear all, do not just say thanks, make a donation for ieatacid,
Click to expand...
Click to collapse
It's true man I agree allow us to reward the effort
Sent from my LG-H830 using XDA-Developers mobile app
thanks again, donation send
ieatacid said:
I've patched LGFlashTool.exe to bypass the login screen.
This is for flashing back to stock. It does not flash TWRP or root your device.
Click to expand...
Click to collapse
Dear sir,
Thanks! please accept my knees and a cup of coffee.
asialove2013 said:
Dear sir,
Thanks! please accept my knees and a cup of coffee.
Click to expand...
Click to collapse
You sir are a kind man. People like you make the effort of others go noticed I'll make sure to follow sute
LG h830
Will this work for the LS992 (sprint) ?
Or will we need a special dll like we needed for the G3 think it was like two files Mega lOck and the device spesific dll?
thanks
uacolon said:
Will this work for the LS992 (sprint) ?
Or will we need a special dll like we needed for the G3 think it was like two files Mega lOck and the device spesific dll?
thanks
Click to expand...
Click to collapse
It should work either way No?
LG h830
Couldn't the recovery part of the (tot) file be replaced with twrp instead and flash via this tool? I'm no dev.. Just an idea
sent from my unrooted g5 cause T-Mobile and lg are jerks
Josh McGrath said:
Couldn't the recovery part of the (tot) file be replaced with twrp instead and flash via this tool? I'm no dev.. Just an idea
sent from my unrooted g5 cause T-Mobile and lg are jerks
Click to expand...
Click to collapse
The problem is there still isn't any tot or kdz files out
LG h830
LG Flash 2.0.1.6 Installer Repack
Repacked LG's original installer with @ieatacid's patched EXE.
Should make installing it all even easier... no more EXE switch.. just install and use (hopefully).
I made sure to add ieatacid's name, paypal and this thread in the Setup EXE.. this way ieatacid's name will always be attached to the LG Flash install rather than the loose LGFlash.exe getting passed around like the old megalock.dll.
Added LGUP and LG Flash directions and downloads to my All-in-One G5 Thread here.
MD5 (Setup_LGFlashTool_2.0.1.6-ieatacid.zip) = 7e2a5a6c74ac3d54a707c7fcde831655
MD5 (Setup_LGFlashTool_2.0.1.6.exe) = 6d0f8a4ad4bc01157a9c7c16f3a7c574
Download Setup_LGFlashTool_2.0.1.6-ieatacid.zip
So how does it recover the devices without the kdz or tot files?
HUGE thanks to @autoprime and @ieatacide we wouldn't be this far without y'all [emoji106] [emoji122]
autoprime said:
Repacked LG's original installer with @ieatacid's patched EXE.
Should make installing it all even easier... no more EXE switch.. just install and use (hopefully).
I made sure to add ieatacid's name, paypal and this thread in the Setup EXE.. this way ieatacid's name will always be attached to the LG Flash install rather than the loose LGFlash.exe getting passed around like the old megalock.dll.
Click to expand...
Click to collapse
Nice work, and thanks!
Jarritos said:
The problem is there still isn't any tot or kdz files out
LG h830
Click to expand...
Click to collapse
I got a .tot file from somewhere -- can't remember if it was linked somewhere here on xda or I saw it on the web somewhere. File name is 'LGH830AT-00-10a-TMO-US-FEB-26-2016+0-user.tot'
Related
Hi guys sorry if this is a dumb question but I've been out of the loop on this.
Has there been a root exploit found for the D6603 Z3's?
I'm using a Xperia Z3 on the Canadian Bell network which is showing the bootloader is locked through the Sony app. I'd like to keep it but if there's nothing yet I might just sell it and get something else.
Thanks in advance.
tinodevoe said:
Hi guys sorry if this is a dumb question but I've been out of the loop on this.
Has there been a root exploit found for the D6603 Z3's?
I'm using a Xperia Z3 on the Canadian Bell network which is showing the bootloader is locked through the Sony app. I'd like to keep it but if there's nothing yet I might just sell it and get something else.
Thanks in advance.
Click to expand...
Click to collapse
Google 'giefroot'
You will need to downgrade to a firmware where the exploit works, but it is easy enough to do and easy enough to run the tool
AFAIK, there is a compatible FTF for your network, find one in the mega collection thread or download one from Xperiafirm
gregbradley said:
Google 'giefroot'
You will need to downgrade to a firmware where the exploit works, but it is easy enough to do and easy enough to run the tool
AFAIK, there is a compatible FTF for your network, find one in the mega collection thread or download one from Xperiafirm
Click to expand...
Click to collapse
Thanks for the info. Does the method still cripple the camera or is there a way to work around this?
tinodevoe said:
Thanks for the info. Does the method still cripple the camera or is there a way to work around this?
Click to expand...
Click to collapse
No, because the method does not involve unlocking the bootloader.
Also, the camera issue when unlocking the bootloader was sorted about a year ago
gregbradley said:
No, because the method does not involve unlocking the bootloader.
Also, the camera issue when unlocking the bootloader was sorted about a year ago
Click to expand...
Click to collapse
Just searching around and it looks like I need to be on 23.0.A.2.93 firmware for the exploit to work.
on my phone the current firmware is 23.0.1.A.5.77 (according to xperiafirm Bell's latest FW is 23.0.1.A.5.77 / R7B)
Is there one of these that I can use to downgrade my phone?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
tinodevoe said:
Just searching around and it looks like I need to be on 23.0.A.2.93 firmware for the exploit to work.
on my phone the current firmware is 23.0.1.A.5.77 (according to xperiafirm Bell's latest FW is 23.0.1.A.5.77 / R7B)
Is there one of these that I can use to downgrade my phone?
Click to expand...
Click to collapse
The carrier or region should not matter.
As long as you have a 6603 any 6603 FTF will do the job. Make sure you have a 6603 though and not a 6616. I am not to clear on the device models from across the pond and flashing a 6603 rom on 6616 (AT&T device US) will result in bootloop.
Not a problem to fix, but may not enable you to root.
gregbradley said:
The carrier or region should not matter.
As long as you have a 6603 any 6603 FTF will do the job. Make sure you have a 6603 though and not a 6616. I am not to clear on the device models from across the pond and flashing a 6603 rom on 6616 (AT&T device US) will result in bootloop.
Not a problem to fix, but may not enable you to root.
Click to expand...
Click to collapse
Thanks again.
What does the R7B at the end stand for and does that matter when choosing the rom to flash?
sorry to ask one more thing, can you point me in the direction on what to use to flash the rom to an earlier version?
tinodevoe said:
Thanks again.
What does the R7B at the end stand for and does that matter when choosing the rom to flash?
sorry to ask one more thing, can you point me in the direction on what to use to flash the rom to an earlier version?
Click to expand...
Click to collapse
Its just regional and carrier branding, nothing to worry about.
Use flashtool to flash FlashTool Files
gregbradley said:
Its just regional and carrier branding, nothing to worry about.
Use flashtool to flash FlashTool Files
Click to expand...
Click to collapse
bloody shame, I got this far and now I can't seem to be able to get it to root.
I did the firmware downgrade, went smooth.
Now following the steps here: http://www.gizmobolt.com/2015/01/24...-giefroot-rooting-tool-cve-2014-4322-exploit/
I get this message after the giefroot does its thing. It reboots the phone but I end up with the same message on each pass.
Disable antivirus anf firewall.
Alright I've made some progress!
I managed to get my phone rooted. Checked with root checker and its legit! SuperSU is installed.
Now I'm trying to figure out how to install a recovery but no dice.
I downloaded the Z3-lockeddualrecovery2.8.14-RELEASE.installer from here: http://nut.xperia-files.com/
and when running, after selecting the first option for rooted phones with SuperSU, it there are a million error messages adb server is out of date. killing...
at the end it says it worked but I still can't boot into recovery. The phone even shows up within the command prompt when I type adb devices. But adb reboot and key presses don't boot into recovery, it only reboots back into the OS.
Is there another way to flash a custom rom or at least a rooted rom with 5.0/5.1? Ideally I'd like to run Cyanogen on my phone but not sure if its possible without unlocking the bootloader.
Thanks in advance for any advice and help!
You will have to unlock to install CM.
Try rebooting to recovery via NDRUtils app
Yes you are rooted, but I bet you don' t have busybox installed.
TheTeslaCoil said:
Yes you are rooted, but I bet you don' t have busybox installed.
Click to expand...
Click to collapse
Both the giefroot and Dual Recovery installations install Busybox into the correct folder.
Issues normally arise when people try to manually install busybox
gregbradley said:
Both the giefroot and Dual Recovery installations install Busybox into the correct folder.
Issues normally arise when people try to manually install busybox
Click to expand...
Click to collapse
Not true.
Busybox can be installed via a flashable zip without any problems.
And there were people who didn' t had busybox installed after root, RootCheker said busybox is not.installed. Then they flashed the zip and voila. Perfection at it' s best.
TheTeslaCoil said:
Not true.
Busybox can be installed via a flashable zip without any problems.
And there were people who didn' t had busybox installed after root, RootCheker said busybox is not.installed. Then they flashed the zip and voila. Perfection at it' s best.
Click to expand...
Click to collapse
If you follow the NDR thread int he cross device development forum you will see that [NUT] advises not to install busybox manually but to use the NDR installer or NDR flashable zip (Maybe this is what you are referring to)
As this user is having an issue installing dual recovery I would follow the advice the dev of that tool.
gregbradley said:
If you follow the NDR thread int he cross device development forum you will see that [NUT] advises not to install busybox manually but to use the NDR installer or NDR flashable zip (Maybe this is what you are referring to)
As this user is having an issue installing dual recovery I would follow the advice the dev of that tool.
Click to expand...
Click to collapse
Right, he must follow the OP' advice.
In this particular case, that' s the way to go.
Guys, finally after hours of trying everything yesterday figured out my problem. A bloody POS Monoprice usb cable!!
I tried with another usb cable and sure enough it patched everything ok....
So now I have installed a prerooted/recovery version of sony's 5.0 which seems to work fine.
If CM needs to be unlocked, are there any other versions out there that will work with the locked bootloader besides the official sony roms?
tinodevoe said:
Guys, finally after hours of trying everything yesterday figured out my problem. A bloody POS Monoprice usb cable!!
I tried with another usb cable and sure enough it patched everything ok....
So now I have installed a prerooted/recovery version of sony's 5.0 which seems to work fine.
If CM needs to be unlocked, are there any other versions out there that will work with the locked bootloader besides the official sony roms?
Click to expand...
Click to collapse
No
Update 09/05/15 New User have to choose
H950PR will work if your upgrade from ATT 5.0.1 to PR 5.1.1, But if you try from ATT 5.1.1 to PR 5.1.1 will brick your device
Root your H950PR HERE
Hey guys, many of you have trouble upgrading to 5.1.1, or have a soft bricked phone or just want to have the international firmware (beacuse everybody knows att sucks!!!)
Well Great News, there is a variant H950PR (Puerto Rico) is compatible with us H950 with the same LTE Bands
This is from G4 Forum:
Currently if you have an AT&T H810 there's not offical AT&T TOT. BUT either if you need to go back to stock OR would like to run international firmware you CAN flash the H810PR (Puerto Rico) Firmware on your AT&T H810 either to go back to stock OR would like to have a FULL international experience.
Click to expand...
Click to collapse
Video
video by @thebesthttps://www.youtube.com/watch?v=nOzs7rsUqfI video by @bemeadows
Download Link
http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW4F53K132I7A4W75FA7N41/H950PR15a_00.kdz
Tool and Guide
http://forum.xda-developers.com/showthread.php?t=2797190
Tips
***Remove the Sim Card and Micro SD
***Copy the KDZ file into LG flash tool folder... Run the programm like Administrator
***If you get "connection to server failed... try again in a moment". That's normal... Move the window (don't press ok or close the windows) you'll see it actually flashing, only wait to your phone reboot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
For those that already flash H950PR but wanted to get LTE access like stock..
Code:
Dial 277634#*# in dialer
Open the menu
Go into Field Test > Modem Settings>LTE band Selection>Band 17
Back
HTML:
Then go to RAT selection
Select GSM/WCDMA/LTE
--------------------------------------------------------------------------------------
If you like my work, buy me a donut
https://www.paypal.com/cgi-bin/webs...bn=PP-DonationsBF:btn_donate_SM.gif:NonHosted
This is great news for H950 users.
As an avid LG user I would recommend not to update with this firmware.
And here´s a little story to back this up:
I bought an LG D850PR version.
I accidentally flashed a tmo (D851) firmware to it.
It got absolutely bricked (no download, recovery, fastboot) (qualcomm 9008), to the point that even using the stock AT&T 10b or 20a tot of KK and LP will not revive the phone.
I used almost every single method to unbrick it (boarddiag, QPST, any flashtool you name it).
So if you mess up and your phone gets Qualcomm 9008 you´re done (Game Over).
Also I am overseas so my phones got no warranty at all and I have a lovely bricked D850PR.
Alex_XV6700 said:
This is great news for H950 users.
As an avid LG user I would recommend not to update with this firmware.
And here´s a little story to back this up:
I bought an LG D850PR version.
I accidentally flashed a tmo (D851) firmware to it.
It got absolutely bricked (no download, recovery, fastboot) (qualcomm 9008), to the point that even using the stock AT&T 10b or 20a tot of KK and LP will not revive the phone.
I used almost every single method to unbrick it (boarddiag, QPST, any flashtool you name it).
So if you mess up and your phone gets Qualcomm 9008 you´re done (Game Over).
Also I am overseas so my phones got no warranty at all and I have a lovely bricked D850PR.
Click to expand...
Click to collapse
I bricked my phone too, H950, it was my first time flashing a KDZ, and I did something wrong, I sent my phone to LG
But when my phone comes back, I will try again, or someone can try like last option before to send it to LG
I prefer have a kdz/tot for make a clean install, and it is h950pr to h950, not h955 to h950
Sent from my Z812 using Tapatalk
I know... My phone was D850PR and the problem is there is no tot to extract the files from. Only KDZ format so I cant repair my phone with the original KK D850 files. Nothing happens it doesnt boot to fastboot or download. So I wouldnt suggest the flashing.
Alex_XV6700 said:
I know... My phone was D850PR and the problem is there is no tot to extract the files from. Only KDZ format so I cant repair my phone with the original KK D850 files. Nothing happens it doesnt boot to fastboot or download. So I wouldnt suggest the flashing.
Click to expand...
Click to collapse
I just check and see that you have LGD850PR20A.KDZ, why you cant extract the files? I did it, I extracted from 950PR.KDZ some files like boot.img, laf.img recovery.img etc.... the reason why I cant use all the programs you said, is because the AP chipset is not supported (SP810 MSM8994) but the G3 is supported (MSM8974AC).
I know its hard to find information about it..... I hope someday we can get a tool that can fix
Well, that was my experience and I got brick
Boarddiag uses .mbn files.
How would you extract .img files from a KDZ.
Cause with LG Firmware Extractor you extract .bin files and only system.img
Boarddiag cant use KDZs because they extract in too long or too short files and with wrong extensions and weird names.
I even paid for online remote repair and the dude said its weird that with D950 normal files we couldnt repair. My phone is clean esn too.
Alex_XV6700 said:
Boarddiag uses .mbn files.
How would you extract .img files from a KDZ.
Cause with LG Firmware Extractor you extract .bin files and only system.img
Boarddiag cant use KDZs because they extract in too long or too short files and with wrong extensions and weird names.
I even paid for online remote repair and the dude said its weird that with D950 normal files we couldnt repair. My phone is clean esn too.
Click to expand...
Click to collapse
I downloaded the SRKTools and tried to find the code to flash the partition and I found this
Code:
rename_to_bin.bat
rename_to_img.bat
So I think it use the .bin files and only rename it to .img..... same like LG Firmware Extractor, it merge all the system.bin files and rename it to .img
That was my conclusion...
It is hard to fix a QHSUSB_BULK, but you got Qualcomm 9008 AKA Super Bricked Mode XD same like me, for that we have to fix the corrupt bootloader, but I said F*** it lol Warranty!!
Haha lucky you, you have warranty. As I told you earlier I was left with a beautiful brick. Im waiting for the arrival of an Octopus Box, its got integrated Jtag. So I hope I can help others if I manage to unbrick mine. For now I'm really really pleased with Flex2 its an amazing phone.
SO i can try with this kdz?
Sorry i didnt understand. I can use this kdz to update h950 att to a stock and clean rom?
Or maybe i can get brick my phone? Thank you.
kiscvik said:
Sorry i didnt understand. I can use this kdz to update h950 att to a stock and clean rom?
Or maybe i can get brick my phone? Thank you.
Click to expand...
Click to collapse
Both lol, you can use it to upgrade but be careful, only do it if you know how to flash or you did before because if it fail then game over xD
Sent from my Z812 using Tapatalk
I know how to flash but no in LG.
Sj12345 said:
Both lol, you can use it to upgrade but be careful, only do it if you know how to flash or you did before because if it fail then game over xD
Sent from my Z812 using Tapatalk
Click to expand...
Click to collapse
I know how to flash but its my first time on LG, So it works perfect? Its android 5.1.1? Thank you.|
kiscvik said:
I know how to flash but its my first time on LG, So it works perfect? Its android 5.1.1? Thank you.|
Click to expand...
Click to collapse
yes, it is 5.1.1 without all att bloatware
here http://forum.xda-developers.com/g4/general/guide-lg-g4-stock-firmware-to-stock-kdz-t3107848
Can do it?
Sj12345 said:
yes, it is 5.1.1 without all att bloatware
here http://forum.xda-developers.com/g4/general/guide-lg-g4-stock-firmware-to-stock-kdz-t3107848
Click to expand...
Click to collapse
Sorry You already do it and all goes good? Thank you i wanna be sure.
kiscvik said:
Sorry You already do it and all goes good? Thank you i wanna be sure.
Click to expand...
Click to collapse
read the post above.... I bricked my phone and sent it to LG because if you do it wrong... you will get super bricked mode with no solution ATM
The reason why I failed..... I tried under Windows 10, I had an official LG tool installed (I should first unistall it) and was my first time flashing a KDZ.... I repeat if you know how to do it then Go ahead
Sj12345 said:
read the post above.... I bricked my phone and sent it to LG because if you do it wrong... you will get super bricked mode with no solution ATM
The reason why I failed..... I tried under Windows 10, I had an official LG tool installed (I should first unistall it) and was my first time flashing a KDZ.... I repeat if you know how to do it then Go ahead
Click to expand...
Click to collapse
SO you will do it again? or you know if some one do it?, i dont wanna brick my phone jajaja thanks
kiscvik said:
SO you will do it again? or you know if some one do it?, i dont wanna brick my phone jajaja thanks
Click to expand...
Click to collapse
hey, talking with @joseacuna, he said me:
I already tried that kdz before finding your tool and it is not compatible with the h950, I can't even finish the setup guide, it restarts in the middle. I did also tried flashing yours with that kdz in it and no success at all
Click to expand...
Click to collapse
So... I think it's not working at all... I will try to find other KDZ.... Or dump all the partitions from the g Flex and make and script.... but it is a lot of work and I dont have my flex right now...:crying:
Sj12345 said:
yes, it is 5.1.1 without all att bloatware
here http://forum.xda-developers.com/g4/general/guide-lg-g4-stock-firmware-to-stock-kdz-t3107848
Click to expand...
Click to collapse
That link is for the G4, not the G Flex 2.. Are you telling him to flash that? Am I missing something?
Sent from my LG-H950 using Tapatalk
Tikerz said:
That link is for the G4, not the G Flex 2.. Are you telling him to flash that? Am I missing something?
Sent from my LG-H950 using Tapatalk
Click to expand...
Click to collapse
yes, that is the G4 forums and like I posted "ATT G4 (H810) users can use the KDZ for Puerto Rico Edition (H810PR) because it has the same LTE bands to work"..... So we have the ATT Flex 2 (H950) users, in theory, we can use the Puerto Rico KDZ (H950PR) cause it is the same hardware and software
Read the op, I posted that link like a guide, the kdz file is in the first post
Has anyone tried?
I'm wondering if anyone has tried and succeeded in flashing this on a h950. I see people have failed but don't see where anyone has said it worked.
Need stock KDZ for h950
If there is a way to create a kdz from a phone running stock firmware i'm running stock still so if you tell me how to create one i will.
Hi every1, i had bricked my LS996 while trying to flash it without knowing that there still isnt any tool available to Unbrick this model. i was probably on ZV5 and tried to flash the only available file that is ZV5 tot, after first the minios came to front, then after reading on forum, i selected boardDL instead of upgrade option in flash tool, and since then I have a brick in my hand, just on Qualcomm HS-USB QDLoader 9008 mode. Have been searching all over but couldnt find anything to solve my problem yet, Any kind of help would be much appreciated, Already tried local repair centers but no use, there arent any official lg repair centers in my country.
If Devs can be kind enough to make a tool, or modify already available G3 unbrick tool, or add MSM8994 support to Boarddiag tool, we (others with same issue) will be the happiest ppl here!
Hope that some1 could do this for us.
zain rizvi said:
Hi every1, i had bricked my LS996 while trying to flash it without knowing that there still isnt any tool available to Unbrick this model. i was probably on ZV5 and tried to flash the only available file that is ZV5 tot, after first the minios came to front, then after reading on forum, i selected boardDL instead of upgrade option in flash tool, and since then I have a brick in my hand, just on Qualcomm HS-USB QDLoader 9008 mode. Have been searching all over but couldnt find anything to solve my problem yet, Any kind of help would be much appreciated, Already tried local repair centers but no use, there arent any official lg repair centers in my country.
If Devs can be kind enough to make a tool, or modify already available G3 unbrick tool, or add MSM8994 support to Boarddiag tool, we (others with same issue) will be the happiest ppl here!
Hope that some1 could do this for us.
Click to expand...
Click to collapse
send it in for repair..i did the exact same thing and lg has sent me a return package to send the phone back
bountyman334 said:
send it in for repair..i did the exact same thing and lg has sent me a return package to send the phone back
Click to expand...
Click to collapse
Yeah thats the best one can do in this situation but i cant do that, as i previously stated, lg or sprint does not have any repair centers in my country. so i guess my only option for now is to wait for a tool like "MSM8994 download tool" made for OP2 which have same chipset/SoC.
zain rizvi said:
Yeah thats the best one can do in this situation but i cant do that, as i previously stated, lg or sprint does not have any repair centers in my country. so i guess my only option for now is to wait for a tool like "MSM8994 download tool" made for OP2 which have same chipset/SoC.
Click to expand...
Click to collapse
they have 1 for the nexus 5 i was testing its a good tool but i was trying to make it work for our phones..
bountyman334 said:
they have 1 for the nexus 5 i was testing its a good tool but i was trying to make it work for our phones..
Click to expand...
Click to collapse
Would be awesome if you could code/mod a tool to work for our GF2s! Good luck Sir!
Really?!?!? No one found out any way to unbrick this device yet?? Whats stoping them??
zain rizvi said:
Really?!?!? No one found out any way to unbrick this device yet?? Whats stoping them??
Click to expand...
Click to collapse
The community is working hard, but remember its not their obligation to release any tool to unbrick devices for you must have read that if you did something to your device it was under your own risk. QUALCOMM9008 is not an easy state to recover from, I guess if we could contact an LG Dev that could provide us with something worth trying that could be awesome but as you know thats very difficult!
Is there flashtool as of now? Thanks in advance.
Head over to my thread. I have the same problem as you and I have been able to Compile the MPGR8994.hex programmer but my phone seems to not even respond to the flash programmer as I use QPST tools which is old version. And that might be the problem but If someone can create me the msimage for 8994 using some files from their phone it would be good.http://forum.xda-developers.com/g-flex2/help/ergent-h959-complete-device-emmc-dump-t3303353
if anyone share ls996 emmc pinouts then its easy to fix it
share its pinouts
its emmc type 7
moonmoon8 said:
if anyone share ls996 emmc pinouts then its easy to fix it
share its pinouts
its emmc type 7
Click to expand...
Click to collapse
How's that? What's the procedure?
If you desolder the emmc chip, and find the pinouts on pcb with multimeter
Maybe one more solution, ATF emmc testpoint finder (box)
If we know the pinouts, we can reflash the emmc without any special hardware (probably usb sd card reader is probably enough, with the right voltages and correct connections)
yeah, but i dont have ATF Probling Box
may be someone have and share then its easy to dump write to specific partitions
Any update or new info? I was thinking about setting up a Bounty thread so more people can get involved.
moonmoon8 said:
if anyone share ls996 emmc pinouts then its easy to fix it
share its pinouts
its emmc type 7
Click to expand...
Click to collapse
here pinout .
I possibly found an easier solution.
Phone is detected in LG flash tool.
the main problem is that crossdl
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
if someone found the correct dll to avoid it, with the tot files we can fix it.
the other possible solution is turn 9008 to 9006 and dump img from linux...
I someone found the way, please tell me
pelelademadera said:
I possibly found an easier solution.
Phone is detected in LG flash tool.
the main problem is that crossdl
if someone found the correct dll to avoid it, with the tot files we can fix it.
the other possible solution is turn 9008 to 9006 and dump img from linux...
I someone found the way, please tell me
Click to expand...
Click to collapse
Exactly which dll do you need? How can we help? Which procedure did you follow to get there?
mauchito said:
Exactly which dll do you need? How can we help? Which procedure did you follow to get there?
Click to expand...
Click to collapse
Well, I have an h950, I flashed the tot, then tryto go back to stock with stock rootedsystem of 11z.
I noticed that the tot is for 11x, so I hardbrick the phone. (QDloader 9008)
I try to write the partitions from linux, but I cannot see it, so I try to reflash the tot as LG g2 hardbricked.
so, I load the tot and dll of att in lgflash tool, and thats the message.
So I try to edit the dll with no succes, try the g2 dll and the same.
So, if we can avoid this crossflash message, we can reflash the tot or dz file with the correct dll
pelelademadera said:
Well, I have an h950, I flashed the tot, then tryto go back to stock with stock rootedsystem of 11z.
I noticed that the tot is for 11x, so I hardbrick the phone. (QDloader 9008)
I try to write the partitions from linux, but I cannot see it, so I try to reflash the tot as LG g2 hardbricked.
so, I load the tot and dll of att in lgflash tool, and thats the message.
So I try to edit the dll with no succes, try the g2 dll and the same.
So, if we can avoid this crossflash message, we can reflash the tot or dz file with the correct dll
Click to expand...
Click to collapse
Can you upload the files you are using?
mauchito said:
Can you upload the files you are using?
Click to expand...
Click to collapse
http://storagecow.eu/index.php?dir=Xda/LG+G+Flex+2/ATT+H950/
Attempting to flash ZV8 .tot built by @iBowToAndroid and get the error- error: cefs::initialize() about 4 seconds into flash. I googled it and the only result was from here where two others had that same result but no resolutions were reported. I did uninstall/reinstall all android drivers, LGup ls770 .ddl, LGup and redwnlded tot and Md5 checked. If anyone has any ideas how I might work to resolve this, I appreciate it, Thanks johnm
Could try the ZV7 one too
iBowToAndroid said:
Could try the ZV7 one too
Click to expand...
Click to collapse
I will try when I get my phone back, sent to LG yet again, since I couldn't get any help for a few days. I have every intent to use kingroot again. ( I need some type of root to change hidden apn settings). The only thing that might be a problem is all that talk about qfuse bricking if you try to flash backwards. Now I don't know that qfuse would trigger or brick or whatever, but the guys on Lg-firmware-rom .com said it possibly could happen. But I'm definitely trying kingroot again. I'll report back
I got the exact same problem. I tried to use the zv7.tot got the same error: cefs::initialize()
It is exactly same 4s
will wait for zv8 to flash
jmacie said:
Attempting to flash ZV8 .tot built by @iBowToAndroid and get the error- error: cefs::initialize() about 4 seconds into flash. I googled it and the only result was from here where two others had that same result but no resolutions were reported. I did uninstall/reinstall all android drivers, LGup ls770 .ddl, LGup and redwnlded tot and Md5 checked. If anyone has any ideas how I might work to resolve this, I appreciate it, Thanks johnm
Click to expand...
Click to collapse
kenlv said:
I got the exact same problem. I tried to use the zv7.tot got the same error: cefs::initialize()
It is exactly same 4s
will wait for zv8 to flash
Click to expand...
Click to collapse
There is a ZV8 tot here built by iBowToAndroid, and the Lg-rom-firmware people said it is legit, but it gave me the same error. I asked and searched and the various answers didn't yield a positive result. Since this could be the last update for stylo, (I say could, because they have the stylo2 now) I imagine the tot will get out there at some point. Since we can't root somethings got to give, so I'm hoping that some benevolent sort will give us a clean solution.
jmacie said:
There is a ZV8 tot here built by iBowToAndroid, and the Lg-rom-firmware people said it is legit, but it gave me the same error. I asked and searched and the various answers didn't yield a positive result. Since this could be the last update for stylo, (I say could, because they have the stylo2 now) I imagine the tot will get out there at some point. Since we can't root somethings got to give, so I'm hoping that some benevolent sort will give us a clean solution.
Click to expand...
Click to collapse
I really think it's the DLLs. The ZV7 tot works fine with the proper DLLs, and I made the ZV8 tot the exact same way. As far as an official tot available from LG, I wouldn't ever count on it....
iBowToAndroid said:
I really think it's the DLLs. The ZV7 tot works fine with the proper DLLs, and I made the ZV8 tot the exact same way. As far as an official tot available from LG, I wouldn't ever count on it....
Click to expand...
Click to collapse
so where are the proper dlls for zv8 tot
Question
How do I send back to lg ? Bricked mine also all I wanted was to remove bloatware will not root again listen learned lol can you link me on how to go about sending it in to get fixed
jmacie said:
I will try when I get my phone back, sent to LG yet again, since I couldn't get any help for a few days. I have every intent to use kingroot again. ( I need some type of root to change hidden apn settings). The only thing that might be a problem is all that talk about qfuse bricking if you try to flash backwards. Now I don't know that qfuse would trigger or brick or whatever, but the guys on Lg-firmware-rom .com said it possibly could happen. But I'm definitely trying kingroot again. I'll report back
Click to expand...
Click to collapse
Jaeehovaa said:
How do I send back to lg ? Bricked mine also all I wanted was to remove bloatware will not root again listen learned lol can you link me on how to go about sending it in to get fixed
Click to expand...
Click to collapse
https://lgmobilerepair.com/request_repair
If you call from the contact link on that page it is faster than just filling out the form, Good Luck!
it is build by z3x
jmacie said:
Attempting to flash ZV8 .tot built by @iBowToAndroid and get the error- error: cefs::initialize() about 4 seconds into flash. I googled it and the only result was from here where two others had that same result but no resolutions were reported. I did uninstall/reinstall all android drivers, LGup ls770 .ddl, LGup and redwnlded tot and Md5 checked. If anyone has any ideas how I might work to resolve this, I appreciate it, Thanks johnm
Click to expand...
Click to collapse
It is because the TOT firmware was build by Z3X box, It is not a secured image.
You can not use LG UP to flash such a z3x firmware of LS770. Please use LG Flash Tool 1.8. or above to flash ZV8 tot
By the way, Down grade from ZV8 to ZV7 by flashing ZV7 firmware CAUSE A HARD BRICK Qualcomm 9008 mode.
DO not try to down grade from ZV8 to ZV7
Who please share the LS77ZV8 tot onto mega.nz, let me try to build a recovery file.
I keep reading different things about using LGup or LG flash tool 1.8. Why does one program brick and the other doesn't. How does anyone choose which one to use? You have said that you cannot flash from Zv7 to Zv5 or you will brick. Now you say you can't flash from Zv8 to ZV7 or you will brick. What can be done? Is the ZV8 tot that iBowToAndroid built good? You could actually help some people here if you would make a post to help most understand the different flash tools the tots and what bricks can be fixed, and can any downgrades work, thanks
LS770ZV8
jmacie said:
There is a ZV8 tot here built by iBowToAndroid, and the Lg-rom-firmware people said it is legit, but it gave me the same error. I asked and searched and the various answers didn't yield a positive result. Since this could be the last update for stylo, (I say could, because they have the stylo2 now) I imagine the tot will get out there at some point. Since we can't root somethings got to give, so I'm hoping that some benevolent sort will give us a clean solution.
Click to expand...
Click to collapse
The LS770ZV8_06.zip file is corrupt..
What did you use to determine the file is corrupt? I downloaded it, unzipped w/7zip, opened in winhec, checked the sig, that you said made it unsigned, I saw the Z3X box in winhec. SO you'll have to tell @iBowToAndroid why you think it is corrupt and maybe he can advise you. I still want to know how you can determine if your phone is qfused. You say yours is NOT. Peo-ple on here say they flashed Zv5 on top of ZV7, so what constitutes a phone with qfuse. Do you have to brick yourself and beg some one to explain? How is it you know you cannot flash ZV8 on top of ZV7? If you don't have a ZV8 tot then how do you know it won't flash? Also how are you writing a recovery when you cannot unlock the bootloader? You can't get to fastboot to flash twrp, even if you could build it. Might as well keep piling on the questions as I haven't gotten an answer on here yet.
Qualcomm 9008 issue
jmacie said:
Attempting to flash ZV8 .tot built by @iBowToAndroid and get the error- error: cefs::initialize() about 4 seconds into flash. I googled it and the only result was from here where two others had that same result but no resolutions were reported. I did uninstall/reinstall all android drivers, LGup ls770 .ddl, LGup and redwnlded tot and Md5 checked. If anyone has any ideas how I might work to resolve this, I appreciate it, Thanks johnm
Click to expand...
Click to collapse
Did you solve the Qualcomm 9008 issue?
It wasn't a 9008 issue, it just softbrick froze from kingroot. I sent phone to LG. How do you know the ZV8 tot is no good. How do you know you can't flash back from ZV8 to ZV7. You do a lot of comments, but I've never seen 1 solution. I've asked numerous questions and instead of answering, you write questions back every single time. How do you know the ZV8 tot is no good, and how do you know that a flash back from ZV8 to ZV7 will brick?
SORRY
jmacie said:
It wasn't a 9008 issue, it just softbrick froze from kingroot. I sent phone to LG. How do you know the ZV8 tot is no good. How do you know you can't flash back from ZV8 to ZV7. You do a lot of comments, but I've never seen 1 solution. I've asked numerous questions and instead of answering, you write questions back every single time. How do you know the ZV8 tot is no good, and how do you know that a flash back from ZV8 to ZV7 will brick?
Click to expand...
Click to collapse
Sorry again, I mistake you with another guy http://forum.xda-developers.com/showpost.php?p=66620240&postcount=2
Do you know testmode?? This is the software i used to check Qfuse status.
The ZV8 tot shared on androidfile host is BAD, Because it is BAD,
Flash back from ZV8 to ZV7 do hard brick, Becuse it does.
Down grade OS ZV8 to ZV7 or ZV5
jmacie said:
What did you use to determine the file is corrupt? I downloaded it, unzipped w/7zip, opened in winhec, checked the sig, that you said made it unsigned, I saw the Z3X box in winhec. SO you'll have to tell @iBowToAndroid why you think it is corrupt and maybe he can advise you. I still want to know how you can determine if your phone is qfused. You say yours is NOT. Peo-ple on here say they flashed Zv5 on top of ZV7, so what constitutes a phone with qfuse. Do you have to brick yourself and beg some one to explain? How is it you know you cannot flash ZV8 on top of ZV7? If you don't have a ZV8 tot then how do you know it won't flash? Also how are you writing a recovery when you cannot unlock the bootloader? You can't get to fastboot to flash twrp, even if you could build it. Might as well keep piling on the questions as I haven't gotten an answer on here yet.
Click to expand...
Click to collapse
Some repair shop has "factory" image which can skip the 'anti-rollback" or "Qfuse check".
after flash the "factory" image, your phone is boot into "mini os" mode;
and then you need to reflash the stock "user" image onto the PHONE.
ALL Android Phone manufacture have two kinds of Frimware: "user image" and "factory image".
Look what i got from my phone; You can not get all those files from a TOT firmware build by Z3X.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Use LG Flash tool 2.0.1.6
jmacie said:
Attempting to flash ZV8 .tot built by @iBowToAndroid and get the error- error: cefs::initialize() about 4 seconds into flash. I googled it and the only result was from here where two others had that same result but no resolutions were reported. I did uninstall/reinstall all android drivers, LGup ls770 .ddl, LGup and redwnlded tot and Md5 checked. If anyone has any ideas how I might work to resolve this, I appreciate it, Thanks johnm
Click to expand...
Click to collapse
Hello, If you are using LG flash tool 2.0.1.6 to open the LS770ZV78 firmware shared by @iBowToAndroid, You can find the file is not valid, LG Flash tool shows fail to load due to CRC check error.
The LG Flash tool 2.0.1.6 patched on xda forum is not good at alll.
If you want to try, please download and install the original one.
I have the dongle megalock shared via "USB-OVER-NETwork", You can run it, and to check the Qfuse status,,firmware CRC check and etc
LS770ZV8 secured
First, let me apologize for the rough guide I'm going to deliver I'll clean this up in due time.
1.) Let's get some files downloaded. So here is a guide by @deadman96385 that details Qfil and the actual process of flashing.
2.) Let's incorporate that into my guide
* You'll choose the programmer from my TWRP folder
* You'll choose the rawprogram0.xml from my TWRP folder
3.) Time to flash....just press Download there's nothing else to do.
4.) Boot into recovery...do I need to explain how?
* Warning* Do not flash Magisk requires a separate boot.img I haven't made it just yet.
So with all this, what is the next step in the process for custom rom installs? Waiting on mine in the mail so I can begin looking into everything as well, sadly I picked the att variant so it looks like things will be more difficult for me.
good work @Unjustified Dev And @deadman96385
ff7cloudsnobody said:
So with all this, what is the next step in the process for custom rom installs? Waiting on mine in the mail so I can begin looking into everything as well, sadly I picked the att variant so it looks like things will be more difficult for me.
Click to expand...
Click to collapse
Roms won't be ready any time soon this was just a preliminary step. And what do you mean by more difficult? I have the att version.
Unjustified Dev said:
Roms won't be ready any time soon this was just a preliminary step. And what do you mean by more difficult? I have the att version.
Click to expand...
Click to collapse
From what I've been reading up on, it had looked like the AT&T variant was more difficult to get through than the others. I could be wrong though. But thanks for this breakthrough!
ff7cloudsnobody said:
From what I've been reading up on, it had looked like the AT&T variant was more difficult to get through than the others. I could be wrong though. But thanks for this breakthrough!
Click to expand...
Click to collapse
I don't know about the other variants. Each firmware is signed so I can't test their Roms, but I used their updated 8.1 proprietary files to build Lineage.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my G8142 using Tapatalk
Unjustified Dev said:
I don't know about the other variants. Each firmware is signed so I can't test their Roms, but I used their updated 8.1 proprietary files to build Lineage.
Click to expand...
Click to collapse
Does going the old "data wipe then flash boot img without encryption" not work anymore? If so then my bad, been a while since I've worked with a phone that is locked down with signed firmware. Was looking into doing that right now.
Edit: And I don't mean via flashboot because first boot should cause it to resign
AT&T
Unjustified Dev said:
Roms won't be ready any time soon this was just a preliminary step. And what do you mean by more difficult? I have the att version.
Click to expand...
Click to collapse
Hello!
Thank you for the first ray of light Please, can you answer some questions?
1) As far as I know, AT&T version of Z999 has locked bootloader. Have you tried this TWRP with AT&T Z999 (not T-mob, China or Russian)?
2) As far as I know, AT&T version of Z999 has non-standard EDL mode and until now there was only one tool capable of flashing it, "Uni-Android Tool" for $49. The usual QFIL doesn't see 9008 COM-port on this phone. So, how does your TWRP gets flashed? Or is the included "firehose" an already patched one for AT&T Z999?
3) If all of these works, can root be (some day) obtained with locked bootloader?
I live in a country with GSM 900\1800, UMTS 2100 & LTE B3 & B20, so right now my Z999 is useless as a mobile device & works only as a small tablet. The root is totally necessary for me to unlock additional bands & I have faith in You
Thanks once again,
WBR - Draco.
Drakosha said:
Hello!
Thank you for the first ray of light Please, can you answer some questions?
1) As far as I know, AT&T version of Z999 has locked bootloader. Have you tried this TWRP with AT&T Z999 (not T-mob, China or Russian)?
2) As far as I know, AT&T version of Z999 has non-standard EDL mode and until now there was only one tool capable of flashing it, "Uni-Android Tool" for $49. The usual QFIL doesn't see 9008 COM-port on this phone. So, how does your TWRP gets flashed? Or is the included "firehose" an already patched one for AT&T Z999?
3) If all of these works, can root be (some day) obtained with locked bootloader?
I live in a country with GSM 900\1800, UMTS 2100 & LTE B3 & B20, so right now my Z999 is useless as a mobile device & works only as a small tablet. The root is totally necessary for me to unlock additional bands & I have faith in You
Thanks once again,
WBR - Draco.
Click to expand...
Click to collapse
1.) I have the att variant
2.) The all have edl mode I sniffed the firehose from uniandroid and had a friend reconstruct it to get it working. And the usual qfil does see the phone. You're more than likely in dfu mode and not edl. Uniandroid can send the phone from dfu to edl. You can adb reboot to edl to get in 9008. The issue was the programmer was incorrect.
3.) Root can probably be obtained I just had no interest. I'll look into it later if I have time. Also I'm not sure if you can unlock more bands never looked into that before.
Sent from my G8142 using Tapatalk
Great!
Unjustified Dev said:
1.) I have the att variant
2.) The all have edl mode I sniffed the firehose from uniandroid and had a friend reconstruct it to get it working. And the usual qfil does see the phone. You're more than likely in dfu mode and not edl. Uniandroid can send the phone from dfu to edl. You can adb reboot to edl to get in 9008. The issue was the programmer was incorrect.
3.) Root can probably be obtained I just had no interest. I'll look into it later if I have time. Also I'm not sure if you can unlock more bands never looked into that before.
Sent from my G8142 using Tapatalk
Click to expand...
Click to collapse
Thanks for the answers! Wonderful news, the ability to flash AT&T phone with QFill changes everything. As for the bands, I've seen a lot of articles on how to unlock Qualcomm phones with NV editor, and had success with several Nexus-es & LG's. Let's hope that after (if...) root is obtained, one of the methods works. It will literally breath the new life into this phone & will make it useful everywhere in the world.
WBR, Draco.
Just an FYI, only running this didn't work for me, I changed the img to recovery.img and used the firehose with the stock files, I edited the boot though to remove secure boot.
Root
Unjustified Dev said:
* Warning* Do not flash Magisk requires a separate boot.img I haven't made it just yet.
Click to expand...
Click to collapse
Hello!
Any news on root or, perhaps, some ROM like Lineage?
WBR, Draco.
Any News?
So I tried flashing my bricked Axon M with the provided firehose file, and using provided B37 firmware, but I keep getting an error associated with "userdata.img is 0 bytes!" and if I delete the file, I then get an error stating "userdata.img could not be found!" any ideas?
ehsan96696 said:
So I tried flashing my bricked Axon M with the provided firehose file, and using provided B37 firmware, but I keep getting an error associated with "userdata.img is 0 bytes!" and if I delete the file, I then get an error stating "userdata.img could not be found!" any ideas?
Click to expand...
Click to collapse
Edit rawprogram0.xml where it says userdata.img edit it to be "" basically telling qfil don't flash it. Alternatively use miflash
Sent from my G8142 using Tapatalk
Unjustified Dev said:
Edit rawprogram0.xml where it says userdata.img edit it to be "" basically telling qfil don't flash it. Alternatively use miflash
Sent from my G8142 using Tapatalk
Click to expand...
Click to collapse
Thanks, I did get past that error, but now it is stuck at https://imgur.com/YzyzPNP
ehsan96696 said:
Thanks, I did get past that error, but now it is stuck at
Click to expand...
Click to collapse
Use miflash
Sent from my G8142 using Tapatalk
Unjustified Dev said:
Use miflash
Sent from my G8142 using Tapatalk
Click to expand...
Click to collapse
How? Whenever I pick the folder with the firmware it just sais "couldn't find flash script"
rawprogram0.xml
ehsan96696 said:
How? Whenever I pick the folder with the firmware it just sais "couldn't find flash script"
Click to expand...
Click to collapse
Here, just use the attached rawprogram0.xml (AT&T B37) with QFil
Drakosha said:
Here, just use the attached rawprogram0.xml (AT&T B37) with QFil
Click to expand...
Click to collapse
Tried as specified and it gets stuck here: https://imgur.com/xMynQ3h
ehsan96696 said:
Tried as specified and it gets stuck here: https://imgur.com/xMynQ3h
Click to expand...
Click to collapse
Do you have spaces in your username? Put firehose programmer file inside the firmware folder, and put the whole folder in C:\Z999 (without any spaces or long filenames). Run Qfil as admin. And never flash phones from DESKTOP...