Database Info

Power button epilepsy o_o

Heya, i know this has info here and there but here's the deal:
The power button has gone soft lately, it was good but then it became really sensitive to touch "one touch to activate" which was cool, until it started pressing by itself, now when i click it to lock the screen it turns on again, and if i shake the phone or something it'll activate.
But now it goes on and off randomly, and sending me sometimes to the power screen i can even activate it by pressing against the body around the front camera.
any ideas what might be causing it (my guess it's a broken/displaced spring), and please if you have links/guides to fix the thing (teardown vids/whatever) i'll be most thankful ^^
i looked around but i want something specific to our device, thanks! <3

Bewinxed said:
Heya, i know this has info here and there but here's the deal:
The power button has gone soft lately, it was good but then it became really sensitive to touch "one touch to activate" which was cool, until it started pressing by itself, now when i click it to lock the screen it turns on again, and if i shake the phone or something it'll activate.
But now it goes on and off randomly, and sending me sometimes to the power screen i can even activate it by pressing against the body around the front camera.
any ideas what might be causing it (my guess it's a broken/displaced spring), and please if you have links/guides to fix the thing (teardown vids/whatever) i'll be most thankful ^^
i looked around but i want something specific to our device, thanks! <3
Click to expand...
Click to collapse
Hardware problem mate. Will need repair. Read about this sometime ago where a user had actually taken the DS apart and fixed a broken plastic lever under the power button that does it... but since the power button presses a switch directly mounted on the motherboard beneath, i'd suggest you refrain from doing this yourself unless you are fairly good with tinkering with electronic innards. I mean software is one thing to mess around with, but hardware has very hairy balls indeed!
P.S. Love the thread title!!

enigmaamit said:
Hardware problem mate. Will need repair. Read about this sometime ago where a user had actually taken the DS apart and fixed a broken plastic lever under the power button that does it... but since the power button presses a switch directly mounted on the motherboard beneath, i'd suggest you refrain from doing this yourself unless you are fairly good with tinkering with electronic innards. I mean software is one thing to mess around with, but hardware has very hairy balls indeed!
P.S. Love the thread title!!
Click to expand...
Click to collapse
Yeah i guess i stumbled upon that, the "L shaped" thing? anyways i'll try to find someone but if they charge me a lot for a goddamned button i'll fix it myself O_O
this phone keeps dragging me deeper & deeper into electronic engineering i swear xD
aand yeah medics take over your mind sometimes XD
Thanks for your reply!

Bewinxed said:
this phone keeps dragging me deeper & deeper into electronic engineering i swear
Click to expand...
Click to collapse
I've experienced the same...
But I think it's good
Sent my thoughts to your head with XDA App

[Q] The thing you plug your earbuds in?

So i was wondering if its normal because every ear bud i plug in my phone, the right side is fine but the left side is all weird after rotating it or applying pressure to it, the left side works temporary
is this normal? and how can i fix it?

No it's not normal.. Maybe you have a loose or faulty jack

serio22 said:
No it's not normal.. Maybe you have a loose or faulty jack
Click to expand...
Click to collapse
sigh my power button now this so a factory defect?

I wish they'd use more durable jacks. This happens to all my phones eventually.

my phone is only... 6 months.. , i used to think it was a pair of earbuds but it was actually my phone... do you know if there is a way to clean them?

It's not dirty. The contacts are bent.

how can you fix this? how does it even happen?

anthonyly said:
how can you fix this? how does it even happen?
Click to expand...
Click to collapse
If it's only six months, can't you get it fixed under warranty?

I had this problem once, too. Check wether the plug fits perfectly into the jack! If it doesn't fit 100% (you have to see nothing of the plug) use a needle and clean the jack. I think it's pluff in there. But don't hurt your phone!

serio22 said:
If it's only six months, can't you get it fixed under warranty?
Click to expand...
Click to collapse
yes i'm pretty sure i can, virgin said that as long as the phone didn't blow up or water damage it might be able..
but then i don't think i can do the whole un rooting thing because it seems too complicated to me

roccatkone said:
I had this problem once, too. Check wether the plug fits perfectly into the jack! If it doesn't fit 100% (you have to see nothing of the plug) use a needle and clean the jack. I think it's pluff in there. But don't hurt your phone!
Click to expand...
Click to collapse
i use a paper clip and taped and and cleaned my ear jack with it and it still lie kthis..

Could you upload a photo, just to make sure it looks like mine does?

anthonyly said:
yes i'm pretty sure i can, virgin said that as long as the phone didn't blow up or water damage it might be able..
but then i don't think i can do the whole un rooting thing because it seems too complicated to me
Click to expand...
Click to collapse
Well if you wanna make it easy, back up your current Rom and just flash an ruu over your phone and when you get it back just restore it are you s-off or s-on?
Enviado desde mi HTC Sensation 4G

serio22 said:
Well if you wanna make it easy, back up your current Rom and just flash an ruu over your phone and when you get it back just restore it are you s-off or s-on?
Enviado desde mi HTC Sensation 4G
Click to expand...
Click to collapse
s off... oh i just download somethign and flash it,,, it looks alot more complicated than that...

roccatkone said:
Could you upload a photo, just to make sure it looks like mine does?
Click to expand...
Click to collapse
of my earubud jack? how can i take a picture.. i dont think you would be able to see anything inside of it.. becauseits dark

Vibrate lost! [Solved]

So basically, I was in the middle of texting, and my phone lost vibration. I was on cMiui.
I tried using one-clicks back to stock, but the problem lingered. I also tried different Kernels before that. I have no idea what to do about it, can anyone help me?
Also, sorry if this was asked+solved before, I was looking but I didnt find anything related to this, and I'm a bit frustrated as well.

Calm your pretty little face.
Do you feel little vibrations? If so shake your phone while its off.
If you don't, try and shake it but I don't know if it will come back.

th3controller said:
Calm your pretty little face.
Do you feel little vibrations? If so shake your phone while its off.
If you don't, try and shake it but I don't know if it will come back.
Click to expand...
Click to collapse
Wow, that actually worked, lol. That's usually the last thing I'd do, thanks a lot.

NeCrO-XyStEr said:
Wow, that actually worked, lol. That's usually the last thing I'd do, thanks a lot.
Click to expand...
Click to collapse
No problem, happened to me once, mark the thread [Solved] by editing your post.
If you don't want this occurring again you can disable keyboard vibration but it should happen rarely. I really suggest you turn the vibration off if your a type really fast with the keyboard, plus it saves you battery!

[Q] I Screwed Something Up

A friend of mine had a Galaxy S3 Amber with a broken (and blank) screen and wanted her data from it's internal memory that is locked and not in debugged mode. I did a lot of research and found the best, most efficient way was to do a motherboard swap with another gs3. I had a Galaxy S3 Blue. I watched a couple of videos and it seemed rather easy. I gathered the proper tools and was EXTREMELY careful not to break or rip anything (and to my knowledge i did not). When i put her motherboard from the amber one into the blue one and the screen would not come on. My first thoughts were it must be her motherboard that went bad. Well when i went to put my blue gs3 back together (again being very careful this entire time) I'm now having the same issue as she was. Black screen, no back light. The bottom lights DO come on and i feel it vibrate when i get a message. There was also no power on chime...
I know its hard to tell with out looking but any ideas on what could be wrong or what i might have screwed up? i checked all the connections and everything looks perfect. Nothing is bent or connected wrong and I didn't force or break anything.
update: so i found that the touch part of it still works fine. i can hear the ripple unlock as well as all the other sounds and such when i touch around and i can here it opening apps. the only issue lies in the screen itself being blank with no back light what so ever,

First of all remove the battery and attempt to power on, then leave without battery for 1 min, I know this sounds silly but it worked on an old iPhone 3G so anythings worth a shot.
If that doesn't work go back into the S3 and make sure all the data clips are firmly in place and locked down but not twisted in anyway. Also make sure their is no moisture or dust on the ribbons. You may not realise it but even the smallest imperfection with this can cause massive issues down the line.
If all else fails her phone may have broke your screen, I don't know how but it is a possibility
Hope I could help and good luck

TechMinerUK said:
First of all remove the battery and attempt to power on, then leave without battery for 1 min, I know this sounds silly but it worked on an old iPhone 3G so anythings worth a shot.
If that doesn't work go back into the S3 and make sure all the data clips are firmly in place and locked down but not twisted in anyway. Also make sure their is no moisture or dust on the ribbons. You may not realise it but even the smallest imperfection with this can cause massive issues down the line.
If all else fails her phone may have broke your screen, I don't know how but it is a possibility
Hope I could help and good luck
Click to expand...
Click to collapse
so i took it apart again today to double check and clean everything and under inspection i noticed a teeny tiny slit on the edge of the lower, bigger ribbon. i know the smallest bit could be horrid. Any fix and would that cause just the screen to not show? i don't know if that is the led connection but i think it may be.

amshook said:
so i took it apart again today to double check and clean everything and under inspection i noticed a teeny tiny slit on the edge of the lower, bigger ribbon. i know the smallest bit could be horrid. Any fix and would that cause just the screen to not show? i don't know if that is the led connection but i think it may be.
Click to expand...
Click to collapse
If theirs a slit I'm affraid that could be it for the screen, like I said even the smallest imperfection can cause massive issues. The slit is probably in the one of the data sections of the ribbon cable which is why data for the screen isn't being carried.
For the fix I don't think their is one unless you can fit a new ribbon on to yout S3's screen
Sorry about the screen

So I took it all apart again. Cleaned ever little thing I could and now it works again. ?

amshook said:
So I took it all apart again. Cleaned ever little thing I could and now it works again. ?
Click to expand...
Click to collapse
Excellent, must have just had some dust or gunk on the cable
Glad you got it working again:victory:

TechMinerUK said:
Excellent, must have just had some dust or gunk on the cable
Glad you got it working again:victory:
Click to expand...
Click to collapse
As am I. Thanks alot for helping. I appreciate it. id buy you a beer if I could lol.

amshook said:
As am I. Thanks alot for helping. I appreciate it. id buy you a beer if I could lol.
Click to expand...
Click to collapse
No problem, thats what XDA is here for:laugh:

Home button problem

Hello,
I've noticed that pressing the left side of the home button doesn't activate it, is this normal, or should I use my warranty to get it repaired?
Edit: It does work if you click the left side of it, though I need to press harder, and it feels a bit wiggly.
Thanks.

Dunams said:
Hello,
I've noticed that pressing the left side of the home button doesn't activate it, is this normal, or should I use my warranty to get it repaired?
Edit: It does work if you click the left side of it, though I need to press harder, and it feels a bit wiggly.
Thanks.
Click to expand...
Click to collapse
i have the same issue, if i press the left or right side it wont work, i have to press it harder or press in the middle...its not that big of a deal....but its annoying...

Anyone else with this issue? Wondering how common is it, and what color is your galaxy? I've heard it's common mostly on black devices.

mine is black....but...my brother got one too and its in black but he doesn't have this issue...his home button is solid...

Dunams said:
Anyone else with this issue? Wondering how common is it, and what color is your galaxy? I've heard it's common mostly on black devices.
Click to expand...
Click to collapse
I had it on my first one and returned it and my new one doesn't but has a dodgy screen.

Jonathan-H said:
I had it on my first one and returned it and my new one doesn't but has a dodgy screen.
Click to expand...
Click to collapse
that's the reason i didn't return my s6, because the home button issue is a small one, i don't wanna change it for another one which maybe have a worse issues....so its not bad, its a bit annoying....

I purchased a gold variant and the first device had a wobbly home button, got it exchanged on the weekend, the 2nd device is not wobbly but the left side is raised more than the right side, however it seems to respond to presses without problems.

Samsung quality control has always been a little shady.. I've returned 2 already... First one no signal... 2nd went back because the home button was very loose and made loud noise when I gently tapped it(not pressed)... 3rd phone has been perfect so far, but I've now noticed after deep sleep sometimes I press the home button and nothing happens... Want wake up until I try pressing again....? Anybody noticed this.... Also the home button went from sturdy to wobbly in about 2 weeks

Kjc99 said:
Samsung quality control has always been a little shady.. I've returned 2 already... First one no signal... 2nd went back because the home button was very loose and made loud noise when I gently tapped it(not pressed)... 3rd phone has been perfect so far, but I've now noticed after deep sleep sometimes I press the home button and nothing happens... Want wake up until I try pressing again....? Anybody noticed this.... Also the home button went from sturdy to wobbly in about 2 weeks
Click to expand...
Click to collapse
This sounds bad, I guess there's really no point in getting a replacement in my case.

Dunams said:
This sounds bad, I guess there's really no point in getting a replacement in my case.
Click to expand...
Click to collapse
Ya im just gonna live with it too... Id rather have a questionable home button than a pink screen or something worse... Every year since the Galaxy S3 I have returned a phone for one reason or another... Samsung makes great phones.... But there are always a few faulty ones

My home button works every time no matter where I press on it. It does make a rattling noise if tapped on (without pressing it) and I think it's for the fingerprint scanner...other than the annoying rattling, my home button is fine. Might wanna get that checked out.

darklime said:
My home button works every time no matter where I press on it. It does make a rattling noise if tapped on (without pressing it) and I think it's for the fingerprint scanner...other than the annoying rattling, my home button is fine. Might wanna get that checked out.
Click to expand...
Click to collapse
that rattling noise kills me, its so annoying, my brother S6 doesn't have this issue...his home button is solid...i am thinking of replacing mine....

Mine doesn't work very well at all. Maybe 40% of the time when pressed. Fingerprint detection isn't that good either.

Thing is, I'm left handed so the fact that it's not clicking well on the left side sometimes requires me to click again and it's a little bit annoying. Oh well.

Mine is too. I have the international variant f.y.i. but i don't want to replace it yet because that's the only problem I've seen in my phone for now.

Rama390 said:
Mine is too. I have the international variant f.y.i. but i don't want to replace it yet because that's the only problem I've seen in my phone for now.
Click to expand...
Click to collapse
I have the same issue.
Dunams said:
Thing is, I'm left handed so the fact that it's not clicking well on the left side sometimes requires me to click again and it's a little bit annoying. Oh well.
Click to expand...
Click to collapse
If it doesn't click well then that's a problem. My issue is that it just sounds annoying.
johnh123 said:
Mine doesn't work very well at all. Maybe 40% of the time when pressed. Fingerprint detection isn't that good either.
Click to expand...
Click to collapse
I would get it replaced.
hajyihia said:
that rattling noise kills me, its so annoying, my brother S6 doesn't have this issue...his home button is solid...i am thinking of replacing mine....
Click to expand...
Click to collapse
I really want to replace mine too for that reason but it would be my fourth S6 and I don't wanna go through all the app reloading and all that again...though I think the camera shutter is different on this one. It pisses me off.
I'm going to see my T-mo rep on Monday so I'll let you guys know if I exchange for a new one and if it doesn't rattle.

darklime said:
I have the same issue.
If it doesn't click well then that's a problem. My issue is that it just sounds annoying.
I would get it replaced.
I really want to replace mine too for that reason but it would be my fourth S6 and I don't wanna go through all the app reloading and all that again...though I think the camera shutter is different on this one. It pisses me off.
I'm going to see my T-mo rep on Monday so I'll let you guys know if I exchange for a new one and if it doesn't rattle.
Click to expand...
Click to collapse
yeah its annoying that all S6 are infected with something....sometimes you tell your self that if you replace it you might get one with even worse issues....its really annoying that samsung can't do it right the only time they tried....

darklime said:
I have the same issue.
If it doesn't click well then that's a problem. My issue is that it just sounds annoying.
I would get it replaced.
I really want to replace mine too for that reason but it would be my fourth S6 and I don't wanna go through all the app reloading and all that again...though I think the camera shutter is different on this one. It pisses me off.
I'm going to see my T-mo rep on Monday so I'll let you guys know if I exchange for a new one and if it doesn't rattle.
Click to expand...
Click to collapse
Yeah I know it's a problem, however it doesn't bother me that much as long as it won't get any worse.
I probably wouldn't even notice it if it wasn't for the complains about it I've seen online.
I am kinda upset about that, but I can live with that.
Also considering I might get a worse replacement I guess this one is fine.