Took delivery of a Pipo X9s yesterday but the windows 10 installation was corrupt. Tried recovery but it didn't work. It was constantly blue screening! Installed a fresh copy of Windows 10, but it has no driver's! Can someone please help as the place where I bought it from don't seem to want to help! Also tried downloading the software from pipo but the download keeps failing and I don't know how to install it either!!!
Any help would be gratefully accepted!!!
Related
Hello , i have a problem with Microsoft servers because i tried to download the recovery image several times and always it didnt complet , so anybody have mirror link ?
I have the same problem, my device still under warranty so they want me to send it in for a new one. I've searched everywhere and can't find it. Mines windows 10.
I've got Surface stock images.
Hi Trig0r,
I have the same problem and need the surface pro 3 stock images, I had install windows 10 on it but im not able to activate, please help
Hello,I've read the forum rules before posting,and before reviving a 2013 thread,I decided to post here as the thread from then didn't helped me,thought that someone more advanced may have some insight on what is happening with my phone.
I have both the stock ROM and the 4.2.2 ROM(More specific Primo X1 Jellybean 4.2.2).
Now my issue:
The phone is dead,it isn't recognized by pc nor does it start or charge(I am running windows 7 x64 bits)
The issue that I am having is that I tried to upgrade it's ROM ,after the phone was having major issues,like shutdowning for no reason.
Now it doesn't start at all.
The phone is a Allview P6_Quad,I have tried to put back the original ROM,with Smart Phone Flash Tool,however sometimes it gives me the "device not recognized" or just in my windows manager shows Alcatel Single RNDIS Interface,sometimes with a yellow exclamation mark sometimes just working good.
Can anyone please help me make this phone work ? I can't currently afford to buy a new one,and any help will be apreciated.
Eronymous said:
Hello,I've read the forum rules before posting,and before reviving a 2013 thread,I decided to post here as the thread from then didn't helped me,thought that someone more advanced may have some insight on what is happening with my phone.
I have both the stock ROM and the 4.2.2 ROM(More specific Primo X1 Jellybean 4.2.2).
Now my issue:
The phone is dead,it isn't recognized by pc nor does it start or charge(I am running windows 7 x64 bits)
The issue that I am having is that I tried to upgrade it's ROM ,after the phone was having major issues,like shutdowning for no reason.
Now it doesn't start at all.
The phone is a Allview P6_Quad,I have tried to put back the original ROM,with Smart Phone Flash Tool,however sometimes it gives me the "device not recognized" or just in my windows manager shows Alcatel Single RNDIS Interface,sometimes with a yellow exclamation mark sometimes just working good.
Can anyone please help me make this phone work ? I can't currently afford to buy a new one,and any help will be apreciated.
Click to expand...
Click to collapse
I fixed it,I will post the solution tommorow here as well for others that may encounter the same problem as me,because it is very late where I live
Hello! This is my frist post.. I hope someone here can help me..
Yes, Onda has his own forum, but is almost dead :crying:
So, here's my problem:
I have a Onda V919 3G Air Dual OS with 64GB of storage.
I tried to install Remix Os on it, doing this, I deleted windows 10. I knew it would happen, but I thought I had no problems installing it again...
So I put the Windows 10 ISO on an USB, connected it to the tablet and using an external keyboard I boot the tablet with the USB.
For a second, all seems working, but suddenly I have a blue screen with "acpi_bios_error". (maybe I can make a video about this)
I made some research online and:
- I tried other ways to create the windows USB, without luck.
- Seems I can update the BIOS only through Windows... And seems I have already the last BIOS (I'm not 100% sure)
Other infos:
- I tried messing up something with the bios, without luck. Anyway I reset it.
- I tried installing Linux, without luck.. I'll try again and again.
- This guide* says that I should see "windows install" when I press F7, but I don't see it.. even if I follow all the steps.
*= ondaforum dot com/topic/2940-v919-3g-air-dual-os-windows-81-or-10-fresh-install-from-usb/
Thanks!
Lombrollo said:
Hello! This is my frist post.. I hope someone here can help me..
Yes, Onda has his own forum, but is almost dead :crying:
So, here's my problem:
I have a Onda V919 3G Air Dual OS with 64GB of storage.
I tried to install Remix Os on it, doing this, I deleted windows 10. I knew it would happen, but I thought I had no problems installing it again...
So I put the Windows 10 ISO on an USB, connected it to the tablet and using an external keyboard I boot the tablet with the USB.
For a second, all seems working, but suddenly I have a blue screen with "acpi_bios_error". (maybe I can make a video about this)
I made some research online and:
- I tried other ways to create the windows USB, without luck.
- Seems I can update the BIOS only through Windows... And seems I have already the last BIOS (I'm not 100% sure)
Other infos:
- I tried messing up something with the bios, without luck. Anyway I reset it.
- I tried installing Linux, without luck.. I'll try again and again.
- This guide* says that I should see "windows install" when I press F7, but I don't see it.. even if I follow all the steps.
*= ondaforum dot com/topic/2940-v919-3g-air-dual-os-windows-81-or-10-fresh-install-from-usb/
Thanks!
Click to expand...
Click to collapse
Hello and welcome to xda-assist,
Unfortunately I can only redirect you to general help forums where you might be able to find help
http://forum.xda-developers.com/android/help
&
http://forum.xda-developers.com/general/help
Good luck
Sam Nakamura said:
Hello and welcome to xda-assist,
Unfortunately I can only redirect you to general help forums where you might be able to find help
http://forum.xda-developers.com/android/help
&
http://forum.xda-developers.com/general/help
Good luck
Click to expand...
Click to collapse
Thanks but I think now my tablet is dead.
I changed a setting on the BIOS and now it does not even boot
Hi friends ,
I want to flash my chuwi vi8 dual os.
I did it in win 7 but in new loptop with win 10, after installing everything, and when i enter cable to tablet in dnx mode, the manufacturing flash tool app is stopped working and crash, does anyone help me? Tnx
Hi guys,
I'm new to the forum but have seen interesting posts about ployer tablet momo7 and 9.
So I'm hoping someone could help with mine, a momo 10w. I cannot find much resources on the internet about this tablet.
I got the tablet with a crashed windows 10. I tried booting from USB for fresh install with 32bit win 10 without success.
While playing around I managed to get to Android recovery screen and tried the "erase and factory reset".
Now the tablet won't boot to the BIOS screen anymore and I'm left with "dnx mode waiting for fastboot command"
Any help will be much appreciated.
Thanks