Hi everyone,
Here's the thing. I had CWM flashed in the phone and all worked good. I flashed a couple of custom roms and it worked perfectly. Although, one day i download a rom for MTK 6582 devices (a huge mistake, i should find roms for pop c7 7041d only) and when i flashed it, the device stuck on an distorted boot logo screen and after some seconds it restarts. I am not able to go into CWM recovery to restore it or anything. After some search I find out that i could "revive" it with the help of a feauture callled META mode.
Unfortunately mtk 6582 devices must have the battery inserted in order to be recognised by the computer. And I say unfortunately because when this device is connected to a PC via usb with the battery in, it boot automatically. So no META mode. (META mode requires a powered off phone). Any thoughts? (sorry for my really bad english)
Kamaraios said:
Hi everyone,
Here's the thing. I had CWM flashed in the phone and all worked good. I flashed a couple of custom roms and it worked perfectly. Although, one day i download a rom for MTK 6582 devices (a huge mistake, i should find roms for pop c7 7041d only) and when i flashed it, the device stuck on an distorted boot logo screen and after some seconds it restarts. I am not able to go into CWM recovery to restore it or anything. After some search I find out that i could "revive" it with the help of a feauture callled META mode.
Unfortunately mtk 6582 devices must have the battery inserted in order to be recognised by the computer. And I say unfortunately because when this device is connected to a PC via usb with the battery in, it boot automatically. So no META mode. (META mode requires a powered off phone). Any thoughts? (sorry for my really bad english)
Click to expand...
Click to collapse
Hi,
I couldn't find much information about your device here except this thread
Alcatel OT POP C7 (7041x)
Try posting your query there. Experts there may be able to assist you.
Good luck
Art Vanderlay
XDA Assist
Related
I Installed philz touch recovery on my phone (Infinix Hot Note X551) using SP Flash Tools and after that I cant boot into recovery and I cant power on my phone. The phone isn't detected by adb too. Any solution?
Hello,
Are you certain that what you flashed is actually for your device? If it wasn't then you are probably hard bricked and may not be able to fix it if it's not charging, no led, no boot to any modes and no sound from PC when the device is connected.
Try posting in the forum linked below.
http://forum.xda-developers.com/android/help
The experts there may be able help. Good luck.
I tried to root my Ulefone Betouch 2, and i could only get to the recovery mode step. I tried wipping and then the device is just turned on to a half-black screen, no logo, no recovery mode( i tried everything. the device is still can be detected by my win 7 pc, i can gain access to it's storage, but whatever i try (installing custom rom, ulefone stock rom via ulefone.com) and nothing can help me get beyond the screen turning up but to a black\purple screen with no menu what so ever.
Any help please? i'm devasteted.....
please help!!
i really will be thankful for anyone to answer
shayzo said:
I tried to root my Ulefone Betouch 2, and i could only get to the recovery mode step. I tried wipping and then the device is just turned on to a half-black screen, no logo, no recovery mode( i tried everything. the device is still can be detected by my win 7 pc, i can gain access to it's storage, but whatever i try (installing custom rom, ulefone stock rom via ulefone.com) and nothing can help me get beyond the screen turning up but to a black\purple screen with no menu what so ever.
Any help please? i'm devasteted.....
Click to expand...
Click to collapse
Hi, Thanks for using XDA assist
It looks like there is no dedicated forum for your device, however
There is a general forum for android here http://forum.xda-developers.com/android/help where you can try to ask to get expert's help.
Good luck.
I've totally wiped my elephone p6000 pro and i stupidly didnt back up my phone properly beforehand. The phone is not recognised now when connected to the PC, and i am trying to flash a new rom. The phone is rooted (it comes prerooted)is there anything i can do to install a new rom ( stock or custom) or is the phone now useless? Any help would be much appreciated, thanks . PS when i try to get the phone into recovery it shows a droid on its back with a red triangle above it and no matter what i do it stays there.
rees54y said:
I've totally wiped my elephone p6000 pro and i stupidly didnt back up my phone properly beforehand. The phone is not recognised now when connected to the PC, and i am trying to flash a new rom. The phone is rooted (it comes prerooted)is there anything i can do to install a new rom ( stock or custom) or is the phone now useless? Any help would be much appreciated, thanks . PS when i try to get the phone into recovery it shows a droid on its back with a red triangle above it and no matter what i do it stays there.
Click to expand...
Click to collapse
Hi and welcome to XDA!
I couldn't find much information about your device here except this thread
Elephone P6000 Pro MTK6753 Information Thread: Root, Recovery, ROMS and more
Try posting your query there. Hopefully the experts may be able to help you.
Good luck
Hey,i have rooted my core prime SMG361h recently with my pc on odin and using twrp,It works well, Things get worst,WHEN I accidently delete the whole OS system of the android phone, I tried to Flash a CYANOGENMOD ,It failed So i reboot it But now, twrp wont show up till now,it only show the samsung GAlaxy core prime icon and a RECOVERY ISNOT SEANDROID ENFORCING and at that time i connect the usb cable with pc it charges and on the left top corner there a display of KERNEL IS NOT SEANDROID ENFORCING (this thing never shown while CHARGING when the TWRP was working)So i press the Volume down +power+menu for the download mode the download mode shown up but ,the device cannot detect by my Pc,(I install the samsung driver from kies as well)I also Replace the USB cable as well thought the cable might be problem the device still charging but its cannot detecct..I already download a custom frmware from (SAMMOBILE Firmware).directly flashing from Twrp wont work, say MD5 not found,so i tried to flash from PC using Odin ,AS the pc cannot detect the device the odin cannot detct as well....M desperate right now...PLz help...
Hello and thank you for using XDA Assist,
sorry for the delayed answer!
Please create a thread in one of our Questions and Answers sections:
Android Q&A, Help & Troubleshooting
Kind regards and good luck
Trafalgar Square
XDA Assist
so its like i was installing twrp boot loader with flashify application and it said success fully installed click yes to boot in to recovery and i pressed yes
and it started restarting and and finally got in to a boot loop ,
so i pressed the volume up button and plugged in to the PC. it got in to fast boot mode and then i flashed a cynogen rom and it got successfully installed and then it went off and wont turn on , its hard bricked now , no boot loader, no fast boot , not getting detected on pc.
I tried almost everything online downloaded all the firmware , rom , sp tools and all crap stuff , but nothing helped ,
then I went to Micromax service center and told then this phone isnt getting on , they said we can't do anything .
now my last hope is here
please help me this is my only phone ;(
Hello,
Welcome to XDA.
Try posting your question in the forum linked below.
http://forum.xda-developers.com/yureka/help/guide-unbrick-hard-bricked-yureka-t3303112
The experts there may be able to help.
Register a XDA account in order to post and reply in the forums. Good luck.