Database Info

[CM11][GT-S7562] Samsung Galaxy S Duos Kitkat 4.4.4

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
​Samsung GT-S7562 CyanogenMod 11.0 Android 4.4.4​
Unofficial Release​​
I proudly present my first Android related work.
The GT-S7560M has a similar hardware except the dual-SIM RIL, so the kylessopen firmware (thanks to jonypx09 and others) was a good initial source.
I reverse engineered the stock Java Radio Interface Layer, and based on that informations, I restructured the kylessopen’s sources.
Finally with my custom telephony-common, telephony-msim java layer, and with the stock rild, and libril*.so binaries, the GSM connection works.
Important: This is an unofficial release. If you find a bug, please send a feedback in this thread.
If you have a problem with the installation, write it down in the Q&A thread.
Compatibility:
S7562, S7562L supported.
S7562_C_, S7562_i_ are not supported. Don't flash on it, otherwise you will brick your phone.
Issues:
Video Encoding has bugs.
Camera is only 3Mpx.
FM radio not supported.
WiFi not works on L version, I need a tester.
Requirements:
TWRP Recovery latest (3.0.2) recommended
Installing TWRP method when no custom recovery is installed at all:
1. Download Odin flashable TWRP .tar to your PC
2. Reboot to download mode and flash TWRP with Odin
3. Reboot to TWRP recovery using VolUP+VolDN+Home+Power keycombo
4. TAKE FULL BACKUP of your system in order to be able to restore if something fails. This is important
5. proceed with cm Installation
Installing TWRP method when custom recovery cwm or twrp is already installed:
1. Download the latest Recovery flashable TWRP .zip package to your device
2. Reboot to custom recovery and flash TWRP .zip
3. TAKE FULL BACKUP of your system in order to be able to restore if something fails. This is important
4. proceed with cm Installation
CM11 Installation method:
1. Download the latest cm11 package to your device
2. Reboot to TWRP recovery.
3. TAKE FULL BACKUP of your system in order to be able to restore if something fails. This is important.
4. Make a factory-reset / Wipe your phone (everythig except SDCARD) important to prevent bootloops
5. Install Unofficial CM11 with TWRP (Uncheck zip file verification before install).
6. Reboot and configure your system
optional. If you are going to use gapps, reboot to TWRP recovery, flash gapps.
optional. If your mobile Connections are not working Flash the hungarian modem using TWRP recovery
Download links:
Hungarian Modem: Modem_S7562XXLJ3.zip Recovery flashable
Odin v3 for Windows: Odin3_GT-S7562.zip
Recovery - TWRP 3.0.2: recoveryTWRP302 Recovery flashable
Recovery - TWRP 3.0.2: recoveryTWRP302 Odin flashable
Latest version of gapps - opengapps.org. Select ARM as platform, select 4.4 as Android. As variant "pico" is recomended.
Stock Hun Firmware: S7562XXALJ4_S7562OXXALJ3_S7562XXLJ3_HOME.tar.7z
S7562 Cyanogenmod 4.4.4 RC3+
RC3 Maintenance updates + additional improvements built by klinkone and kengnatural
cm-11-20161028-UNOFFICIAL-kylessopen
The changelog of the latest build:
Latest security updates
Fixed OMX bug which did not allow the latest version of Viber app to work.
ART compile timeout increased to allow large program to be installed.
For primary-physical configuration, where there is no emulated external memory, only physical sdcard is used as an external memory, please see below:
cm-11-20161029-UNOFFICIAL-kylessopen-physical-primary.zip
Previous build:
cm-11-20160305-UNOFFICIAL-kylessopen
default cpu governor set to ondemand and min. cpu freq. set to 245 MHz by default
default minfree settings changed to avoid hanging of the phone when zram is full;
ART fix for gcc-4.8 (thank to JustArchi)
BLN support without external app (button backlights are used as notification leds)
fixed front camera preview hanging after taking a picture
initial fix of facebook app video codec issue (still buggy)
For primary-physical configuration, where there is no emulated external memory, only physical sdcard is used as an external memory, please see below:
cm-11-20160305-UNOFFICIAL-kylessopen-physical-primary
This build is the same as cm-11-20160305-UNOFFICIAL-kylessopen ROM with the following differences:
physical-primary configuration
experimental high vm.dirty_ratio setting for improving i/o speed
Old changelogs
20160207 changelog:
-mounting the "hidden" partition disabled
-obsolete start() and startvm() returned back to support xposed again
-fixed soft reboot issue when bluetooth is switched off and user sends some file using it
20160205 changelog:
-bluetooth soft reboot fixed by kengnatural
-theme uninstall soft reboot fixed by kengnatural
-available ram is 645mb (~20mb more which is as stock)
20160105 changelog:
-zram and zcache updated + fixed
-zram reduced to 128mb
-added missing things for low ram config according to: https://source.android.com/devices/tech/config/low-ram.html
-user friendly f2fs support
-ramdisk ext4/f2fs double entries for /data and /cache
-initial BLN (capacitive keys act as notification LED)
-some cleanup in device tree
-removed cm-updater (obvious why)
20151230 changelog:
-applied "JustArchi's ArchiDroid Optimizations V3 for CyanogenMod (11)" optimization level -O3
-using google's GCC4.8 for rom and kernel
-bluez updated to V5.36 thanks @Codename13 for sending the pull request
20151207 changelog:
-changed kernel repo to my fork of majonez BA2X-2.0
-xposed patch
-fstab updated
-unused 50mb hidden partition is mounted to /hidden on boot do whatever you want with it
-dalvik-cache devided system apps go to /cache/dalvik-cache user apps go to /data/dalvik-cache (saves some space in /data)
-256mb zram enabled by default
20151127 changelog:
-initial basic rc3 configuration for updated RC3+ builds
-some repos changed to up to date ones (legacymod)
-latest cm-11.0 sources of 27.11.2015 including android security-patches of 01.11.2015
-wifi reconnect working
-no systemupdateservice wakelock aka google play services wakelock battery drain etc.
S7562 Cyanogenmod 4.4.4 RC3
Changelog:
1. Improved Bluetooth support
2. Most kernel debug flags disabled
3. Added some missing libraries
4. Merged all CyanogenMod source changes
5. Bugfixes
Comments:
I think it's a little faster than previous versions. - What do you think?
You can update system from RC2 without wipe your phone.
You can enable "Force high-end graphics". Mostly, animations are smooth.
I ask everyone, who have bluetooth accessories to test the bluetooth layer, and provide feedback what is working or not (just with log cats).
ROM: cm-11-20150323-UNOFFICIAL-kylessopen-RC3.zip
Old Releases
S7562 Cyanogenmod 4.4.4 RC2 - download count close to 1k
Changelog:
1. Backported Bluetooth driver and Management Interface from Linux Kernel v.3.13
2. Newest Bluez 5.28 Bluetooth stack
3. Few bugfixes to wireless driver
4. All RC1 updates included
You must wipe your phone before upgrade to RC2!
ROM: cm-11-20150309-UNOFFICIAL-kylessopen-RC2.zip
kernel_kylessopen_RC2_v2.zip This update solves bluetooth wakelock issue, so the phone can go to deep sleep.
bluetooth_startup_fix.zip This update solves the system crash at startup.
KlinkOnE's kernel based on RC2_v2 with F2FS support: ==>
S7562 Cyanogenmod 4.4.4 RC1 - downloaded more than 1k times
Changelog:
ROM: http://uploaded.net/file/pionx3a0 mirror: cm-11-20150205-UNOFFICIAL-kylessopen-RC1.zip
Updates for RC1 (flash with TWRP):
browser_fix.zip
signal_strength_fix.zip
torch_fix.zip
CameraFIX_v2.zip This will fix the front and back videocamera. Before install this, disable Viber's videoConverterService with DisableService app (Play Store).
If your battery quickly discharges on RC1, disable all bluetooth service (org.codeaurora.bluetooth, Bluetooth Share) with DisableService (Play Store).
Comments:
Working Radio Interface Layer for both SIM card
WiFi direct is not supported, so you can't enable. Use Bluetooth, Dropbox, email etc...
If you want to install Viber, before the first start, disable Viber's videoConverterService with DisableService app (Play Store).
The "OneL+ Lollipop" theme with "IdeaL Theme Dark"'s icons is beautiful.
To prevent sound disruption, enable the equalizer.
About Google Apps, and GService Bug
Fixed with all releases after rc3. For reference see below
Latest gapps (ver. 7.x) has issues, and eat our baterry, so I recommend to install the package that I linked, disable autoupdate in Gapps, and disable GPlay's CheckWifiAndAutoUpdate service with DisableService (from Play Store).
If your Gservices app updated to the version 7.x, you can easily downgrade to 6.x
(you can do this, if you installed my linked package or earlier):
Settings-->Security-->Device Administrators-->Uncheck "Android Device Manager"
Settings-->Apps-->Google Services-->Disable-->Yes, you want to remove updated version
Recommended gapps: pa_gapps-modular-pico-4.4.4-20150117-signed.zip
Future:
bugfixes
XDA:DevDB Information
[CM11][GT-S7562] Samsung Galaxy S Duos Kitkat 4.4.4, ROM for the Android General
Contributors
m4jonez, KlinkOnE, kengnatural
Source Code: https://github.com/majonez
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.0.x
Version Information
Status: Beta
Created 2015-03-27
Last Updated 2016-12-06

m4jonez said:
Samsung GT-S7562 CyanogenMod Kitkat Unoffical release
Click to expand...
Click to collapse

huntercity said:
doesn't works
Click to expand...
Click to collapse
What's wrong with links?
I can download files. It is a bit slow, but works for me.

m4jonez said:
What's wrong with links?
I can download files. It is a bit slow, but works for me.
Click to expand...
Click to collapse
both link response ... "ERR_CONNECTION_REFUSED"
the link about the sammobile firmware works

huntercity said:
both link response ... "ERR_CONNECTION_REFUSED"
the link about the sammobile firmware works
Click to expand...
Click to collapse
Maybe this site is blocked for you by your ISP or your DNS server is not serving this domain.
Try to set DNS servers for your computer to 8.8.8.8 and 8.8.4.4 (Google DNS).
Or use TOR browser.

m4jonez said:
Maybe this site is blocked for you by your ISP or your DNS server is not serving this domain.
Try to set DNS servers for your computer to 8.8.8.8 and 8.8.4.4 (Google DNS).
Click to expand...
Click to collapse
i tried different proxy and different connection but the results it's always the same

Link Please GAPPS for this rom
http://d-h.st/U30 tested by me works on stock hungary + cm11

deleted

I try the rom with EUR XXBML1 firmware and the ril doesn't work. If I have time i will try the rom again with the Hungary firmware. And something more, we will have update for those that don't work??

Your first job! The great one hats off brother gave another life to the device
Sent from my Micromax A106 using XDA Premium 4 mobile app

Hey
Hi, Thanks. just wanted to know if one sim card works or 2 are required??

You Nailed it bro! @m4jonez
YES! 100% Verified that we get network on both (you can insert single as well) .
However that the rom is a bit laggy (much better than one would expect from a first build).
Yes there are bugs ! but yeah! there is network too..
Where should we report the bugs bro @m4jones? I found some.
1 network on indian modem is super duper unstable.. so change op and recomended people to flash your modem file.
With your modem , i found the sim networks to be quite stable.
2 torch app is useless as neither app nor widget works. So fix it or remove it
( CAMERA WORKING FINE FOR ME)
COngrats and all the best ! continue your good work

The built-in browser fixed.
Where should we report the bugs bro @m4jones? I found some.
Click to expand...
Click to collapse
Post it here.

minor problem here:
Signal strength is reported wrong for both sims.
Always shows full strength.
Recognition seems to be working as values are changing but they are much too high. Around 2000dBm.
Phone calls in/out SMS and data rock stable on both sims for me.
Performance is good(better than expected).
Zram is not working init.rc entries(or script) are missing. Maybe a kernel problem too idk ATM.
Thanks @m4jonez you're great!!!!!
Gesendet von meinem GT-S7562

Perhaps it will help you to fix the flashlight in this time and the future.
http://forum.xda-developers.com/xposed/modules/xposed-flashlight-fixer-fix-devices-t2867267

KlinkOnE said:
minor problem here:
Signal strength is reported wrong for both sims.
Always shows full strength.
Recognition seems to be working as values are changing but they are much too high. Around 2000dBm.
Click to expand...
Click to collapse
fixed.
Vergilliy said:
Perhaps it will help you to fix the flashlight in this time and the future.
http://forum.xda-developers.com/xposed/modules/xposed-flashlight-fixer-fix-devices-t2867267
Click to expand...
Click to collapse
It was just a path issue with Torch. Fixed.

m4jonez said:
fixed.
Click to expand...
Click to collapse
working that was fast
Thanks
Gesendet von meinem GT-S7562

Step by Step Guide
Please provide step by step installation guide & few more after installation photos.

Review !!
Great Work !!:laugh::good: @m4jonez . Love to have a Cm Rom for our device
My thougts :
1) Battery drainage is an issue..
2) Interface Performance is good but can be better ( can't expect more from Rc1 )
3) Need a good overclocked Kernel !!
THANKS A TON
One Question ........Is lollipop next :fingers-crossed: ( kidding )

Can I flash Stock kernel in this??

[ROM] [7.1.1] [PORT] [Unofficial] A.O.S.P - UMI London - FINAL

This rom is a port from dogee x5 device nougat 7.1.1 by SnowCatPDA.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LISTS OF DEVICES WITH THESE LCD THAT CAN RUN AOSP 7.1.1 WITHOUT ANY PROBLEM
otm1283
nt35521
with possible display problems after flashing the rom
s6d7aa0
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Installation Instructions:
Download TWRP 3.1.1 from here. flash using spflash tool
Download ROM from <DOWNLOAD LINK BELOW>
Download OpenGapps nano or pico from OpenGapps
(choose Arm Android 7.1 )
or
Download BeansGapps MINI from BeansGapps
(choose the MINI Package)
*********
Boot to recovery
full wipe: system, data, cache, dalvik/art cache
flash rom
flash gapps
root of your choice
reboot system
making init.d work
follow instructions from here under aio patch v4
there is also a magisk module for init.d you can search for it here in xda.
bugs
front cam - kernel related issue - meaning i cannot fix it!
music fc once
tell me
ROM OS Version: 7.x Nougat
Based On: AOSP
Version Information
Status: Stable
Stable Port Release Date: 2017-08-22 (lol)
Ported 2017-08-22
screenshots
AOSP 7.1.1 v2.1​
screen flicker fixed
front cam fixed
camera right pixel
music fc fixed
more ram efficient
ril improved (i guess) - pls test both sim signal and comment below
revised swap script for performance
new kernel
new baseband - from MAY (umi_london) update
faster shutdown & reboot
quick power-on
hibernate support
bugs:
factory reset not working, it makes the rom unbootable after reboot
..tell me
new:
documents
deskclock
recorder
latinime (smaller size)
pixel launcher updated
jelly browser
greenify
installed as user app:
greenify
rom:
fully stable
deknoxed
debloated
deodexed
zipaligned
installation
full wipe
flash simultaneously
. rom
. gapps arm 7.1 (beansgapps/opengapps pico)
. supersu/magisk
reboot system
screenshots
https://file.army/i/6KgIUj
https://file.army/i/6Kgxol
https://file.army/i/6KgZuk
https://file.army/i/6Kgufv
https://file.army/i/6KgvVH
https://file.army/i/6KgERf
https://file.army/i/6KgOAI
https://file.army/i/6KglnV
https://file.army/i/6KgLTp
rom link
screenrcord here
AOSP 7.1.1 v2.3​
whats new:
camera2 as default camera
right pixel 8mp back 2mp front
lawnchair
smoother than the previous version
less lag
permissive on boot
init.d works
added chromium as default browser
removed some apps on previous version
bluetooth audio works
corrected battery capacity into 2050 mah
more..
not tested:
RIL (pls comment below for issues)
not working/bugs:
tell me..
ROM info:
debloated
deknoxed
zipaligned
gapps already in the zip
magisk already in the zip
note: whether you like magisk or not you dont have any choice
as i used it to switch selinux to permissive on boot, also, because
of this init.d works and other tweaks..
kernel-adiutor not responding?
-grant root permission to solve this issue
avoid updating runtime-opt. module
-may cause fc to some apps
documents (downloads) can no longer see sdcard
-go to settings, app, look for documents and clear its data
installation:
OWNERS OF w370 WITH THE LATEST MAY 04th 2017 FIRMWARE
full wipe (system, data, cache, dalvik/ART cache)
flash ROM.zip
reboot
OWNERS OF w370 5002W variant WITH THE LATEST JULY 25th 2017 FIRMWARE- TESTERS ONLY
full wipe (system, data, cache, dalvik/ART cache)
flash ROM.zip
flash firmware_patch.zip
reboot
link:
aosp 7.1.1 v2.3
5002w_patch
screenshots:
https://file.army/i/XnPKQl
https://file.army/i/XnPzN7
https://file.army/i/XnPZPf
https://file.army/i/XnPIlv
https://file.army/i/XnPLbQ
https://file.army/i/XnP6FV
https://file.army/i/XnPMla
AOSP 7.1.1​
what's new:
re-worked
feradroid engine
some of the hidden features unlocked e.g night light, etc..
circle battery icon
added dirac
5 GHz AP Band
some default apps replaced/updated
kernel adiutor removed
beansgapps removed from .zip
removed "x" on signal bar
set minimum brightness value to 3 (works when autobrightness is off)
"screen overlay detected" (of some apps) error fixed
camera2 shutter fixed
transfer files to ext-SDcard without write permission
fmradio fixed
battery saver color mode changed
new documentsui icon
add-ons:
miui camera, accessible in settings/display - backup cam incase you dont like camera2
the app is in beta stage so expect a few bugs..
rounded corner in settings/display
font chooser in settings/display
when applying a font and does not work after tapping set, just reboot manually, apply same font again, then reboot agiain.
wifi pass in settings/display
autorun manager in settings/display
terminal app
2nd option to choose default write disk
TO SET DEFAULT ENTRY
OPEN ROM.ZIP
NAVIGATE TO install/data/
extract SDPath file
open using notepad++ or similar program
choose value according to your needs
default = 0
values:
0 = data will be written on phone memory
1 = data will be written on external sdcard
drag and drop SDPath file back into the rom.zip and flash
if you decided to change to ext-sdcard just navigate into /data/SDPath
edit using esfile explorer or similar app and save
then go to settings/storage and match your setiings
reboot
HERE'S THE TRICK
TURN ON BATTERY SAVER, I BET YOU'LL BE AMAZED!!
Installation Instructions:
UMI LONDON
Full wipe (System, Cache, Data, Dalvik/ART cache)
Flash ROM
reboot
UMI LONDON 5002W
Full wipe (System, Cache, Data, Dalvik/ART cache)
Flash ROM
flash firmware patch (link above)
reboot
AOSP 7.1.1 - <i have lost my files due to corrupted harddisk so i will release different updated version of aosp>
screenhots:
AOSP 7.1.1 FINAL​
link here
gcam as default camera
enabled ambient display by default
added useful magisk modules for rom performance
..more..
how to:
goto recovery
wipe everything except ext-sdcard
flash rom.zip
reboot system
install kernel adiutor and busybox
run k.a
under CPU, change CPU GOVERNOR - ondemand ---for best deepsleep
credits:
xda
4pda
aosp
Ninnix96
SnowCatPDA
@deletescape
@topjohnwu
fordza - for sharing the kernel
vo-1/a-1 - who compiled the kernel 3.18.35 for london
feravolt
@kishorerprem
fxsheep
for the magisk modules​ @veez21 -art optimization
@Jman420 -selinux permissive script
@korom42 -simple init.d enabler​

Link is dead
Can you re-upload?

lamensje said:
can you re-upload?
Click to expand...
Click to collapse
link updated. Rom updated.

ian97 said:
link updated. Rom updated.
Click to expand...
Click to collapse
Thanks! I will try it out.

Hi! Thanks for the rom. Looks real nice!
However, I'm getting the screen blinking with v2.1, it flashes on and off about every second. I've tried reflashing, disable auto brightness and GPU options in developer menu. Is there any fix?

GiantChicken said:
Hi! Thanks for the rom. Looks real nice!
However, I'm getting the screen blinking with v2.1, it flashes on and off about every second. I've tried reflashing, disable auto brightness and GPU options in developer menu. Is there any fix?
Click to expand...
Click to collapse
sorry about that. but do you happen to flash this rom on 5002W london variant?

updated op notes. sorry about not mentioning this rom is for non 5002W variant.

@GiantChicken @lamensje
v2.3 available for download. skipped v2.2 i forgot to upload this before..

ian97 said:
@GiantChicken @lamensje
v2.3 available for download. skipped v2.2 i forgot to upload this before..
Click to expand...
Click to collapse
Thanks for the update, but I still have the screen flicker sadly.
I don't know which model Umi London I have (I don't know where I can find it).
I didn't do a clean install from 2.1 to 2.3 (maybe that's why there still screen flicker?).
I tried the '5002w_patch', no change.
Any suggestions?

lamensje said:
Thanks for the update, but I still have the screen flicker sadly.
I don't know which model Umi London I have (I don't know where I can find it).
I didn't do a clean install from 2.1 to 2.3 (maybe that's why there still screen flicker?).
I tried the '5002w_patch', no change.
Any suggestions?
Click to expand...
Click to collapse
full wipe is needed to flash this rom. but if the screen still flickers then you are having a kernel issue. meaning 3.18.35 compiled by vo-1 isnt for your device (5002w variant) ..i really am still confused about this phone because one of the member of my site with 5002w london reported that the ROM (aosp 7.1.1) is working fine on him only the camera focus isnt working but working for me.

Hi.
com.android.phone has stopped after clean flash of any version linked in OP. Either with sim inserted during phone setup or after. Tried typical solutions cleaning caches etc, nothing helps. I noticed it dowloaded some messed up apn settings, so I added my provider settings and same story. SIM is working in another phone andprocess is crashing with other sims too.

Is it mt6580?

Eazart said:
Is it mt6580?
Click to expand...
Click to collapse
Yeah it is, and stock firmware is : MP_mt6580_w370_5002w_91umi_cc_64gbitp8d3_m_wcdma_mul_20170725-115119_songlixin_PC

hideo86 said:
Yeah it is, and stock firmware is : MP_mt6580_w370_5002w_91umi_cc_64gbitp8d3_m_wcdma_mul_20170725-115119_songlixin_PC
Click to expand...
Click to collapse
Is it twrp flashable? I want to port it to my device mt6580 kernel 3.18.35

Eazart said:
Is it twrp flashable? I want to port it to my device mt6580 kernel 3.18.35
Click to expand...
Click to collapse
Original firmware flashed/reflashed through sp flash tool , roms from this topic- TWRP, I didn't try original=> twrp.
edit; and yes , same kernel

hideo86 said:
Original firmware flashed/reflashed through sp flash tool , roms from this topic- TWRP, I didn't try original=> twrp.
edit; and yes , same kernel
Click to expand...
Click to collapse
Will port to my device soon any known bug?

This is what keep coming up when I port this Rom... How can I fix it?

I am trying to install any of the AOSP roms to Umi London (Umidigi W5002), no success. I was on stock 20170725, then installed TWRP and tried any of the AOSP versons, but is goes to infinite bootloop.
Bootloop is caused with and without the W5002 patch).
Recovery and fastboot are working perfectly. I OEM unlocked the stock rom from dev.options and thru fastbot, just to mention. Any solution or advice wil be helpful. Thanks.

Hello guys!! As i can remember i dont have any issue with the dialer. If you want a clean port with this rom grab the latest aosp 7.1.1 by snowcatpda (google his name and youll see his site where he put his roms for mt6580) then grab my port aosp 7.1.1 final's files -- framework-res, settings.apk systemui.apk..
This rom works fine with enforcing, permissive is likely making the rom unstable but with this init.d works well.
My umi died few months ago- cracked screen, wet hardware. So i can no longer help you guys.

[ROM] [ 8.1.0 ] Official madOS - Vernee Apollo Lite & X [MT6797]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is a Official Build of madOS ( based on AOSP 8.1.0 ) for Vernee Apollo Lite & X with MTK 6797 SoC
madOS is based on pure A.O.S.P. with many additional customizations and MediaTek support.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Installation Instructions:
The latest 7.1.2 build must be flashed in SPFT with firmware upgrade mode before this ROM can be flashed (Downloads: VAL, VAX)
Download ROM from M.A.D. Facebook
OR from xda DevDB
Download 8.1 GApps from xda devdb (Mirror)
Backup
Flash new mandatory new Oreo TWRP (available on downloads)
Boot to the new TWRP recovery
full Wipes (dont come crying if you didn't .. ;p )
Install rom (optionally following by GAPPS if you use them)
Optional: go to: wipe --> Advanced Wipe, tick 'cache' and klick 'repair or change File System' --> change File System --> F2FS --> swipe to the right (hit back several times, and proceed the same way with 'data').
Reboot System
Working:
RIL (Calls /SMS, Data connection, etc)
Wifi
Bluetooth
FM Radio
All Sensors
Fingerprint
Lights
Both storages & MTP
HW de/encoding
Camera (photos and video)
GPS & aGPS
Audio
madOS Extras (the features ya'all used too), plus, some new features we added on Oreo)
Bugs:
-
XDA:DevDB Information
madOS_O_VAL_VAX, ROM for all devices (see above for details)
Contributors
fire855, DerTeufel1980, superdragonpt
Source Code: https://github.com/MediatekAndroidDevelopers
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.x
ROM Firmware Required: TWRP
Based On: AOSP
Version Information
Status: Stable
Stable Release Date: 2017-12-25
Created 2017-12-25
Last Updated 2018-01-13

General F.A.Q.
Q: What the hell is madOS ?
A: madOS, (M.A.D. Team OS), is a ROM based on pure A.O.S.P. with extended capabilities and customizations made by or merge/adapted by M.A.D. Team.
Q: Which recovery should I use for this ROM?
A: Latest M.A.D. TWRP 3.2.1-0 recovery
--> Check xda Download Section
Q: How do i flash new recovery ?
A:
1: You can flash it with a scatter file (LP rom layout)
2: You can simply flash it from the existing twrp recovery: Install> Install image> Select Oreo TWRP> Select "Recovery" as partition to flash.
Reboot to recovery to use new one
Q: Do i need to make full wipes?
A: YES, dont come crying at me, if you didn't .... ;p
Q: What is "full wipes" ?
A: To Wipe : Cache; System; DATA ...
Q: What should i use f2fs or ext4?
A: Both are supported, choose the one you desire
Q: is the Data connection issue of going to / from 4G still present?
A: nope data switchs pretty fast on our new RIL
2G>3G>4G | 4G>3G>2G pretty fast
Q: Does this rom have any Theme support
A: Yup, We have working Theme Engine (madOS extras)
Q: Some translations are missing for my language, can I help?
A: Sure you can, please check our translations repo available here , you can either do a pull request, or if you don't know how to work with git, sent us the XML. Strings for your language ( Check Readme on repo).
Q: I want to report a bug(s) do you have an issue tracker?
A: Yeah... madOS issue tracker
Q: What's working ?
A: Check first Post for current status
Q: App "x" doesn't work, why?
A: Probably not compatible with OREO yet, feedback is welcome
Q: Is the rom rooted?
A: NO, But you can easily root with :
1: Magisk ( v14 onwards.)
2: Super SU ( v2.82 onwards)
Q: Should i root together with rom ?
A: Not advised.. mainly the Magisk that gives some weird issues...
Flash ROM and GAPPS (if you use gapps), after first boot get back to recovery and flash your desire rooting method
Q: Does xposed work?
A: Is there Xposed for O? ... then no ;p
Q: How is battery life with Oreo?
A: Pretty awesome
Q: Does this build support Vulkan?
A: No....duh! v
Q: Does doze work in this build?
A: Yup
Q: Does 4k video recording work?
A: Yes, but not every phone supports it. If 4k worked in the stock rom, it will work in madOS too.
Q: when will (feature/issue here) be fixed?
A: NO ETA , please
Porting F.A.Q.
No porting support, no port questions allowed on this thread, and porting PMs will be auto-deleted, porting replies will be reported as well
G.APPS F.A.Q.
Q:What GAPPS package should I use?
A:OpenGapps arm64 nano/mini
Since there's no Official GAPPS for 8.1.0 just yet...
... we had built OpenGapps nano and pico versions
--> Check Download Section
Q: How to properly install GAPPS?
A:Flash Rom + Flash Gapps at once
CREDITS and Thanks
madOS Team
Our translators, credits list here
A.O.S.P.
AOSPA
DU (Dirty Unicorns)
Omni
HELP supporting madOS
We do this on our free time, however we do have costs on maintaining this :/
Any donation is highly appreciated
You can donate by using
this link
If the above doesn't work in your country, then you can directly donate by using this e-mail adress: [email protected]
About madOS Proprietary Apps
You are NOT allowed by any means, to use our madOS apps on any other build, your rom
This is exclusively for OFFICIAL madOS ROM releases
@To Moderators: Feel free to clean the thread, whenever users start spamming, severe OT, or questioning about porting...

Changelogs
[Stable] Build [8.1.0] 20171225
First Release
madOS version: 2.1
Patch Level: 8.1.0 [OPM1] December 5, 2017
Kernel: 3.18.89 (o-8.1.0 branch)
[Stable] Build [8.1.0] 20180102
madOS version: 2.1.1
Fixed UI lags / hangs
Fixed deepsleep
Fixed screen recording
Fixed video playback issues
Updated graphics system
Improved GSM/LTE signal handling
Fixed alarms
Fixed FMRadio
Fixed wallpaper scrolling setting in madLauncher
Fixed 5GHz hotspot issues
Improvements in bluetooth for A2DP
Updated included APNs list
madOS color Engine:
Rebased & many improvements on the engine
Better support on theming Quick Settings
New option to override default Google 8.1 QS theming
New reset button to get back to default 8.1 theming
New MAD mode

Merry Christmas !!

Thanks. Merry Christmas.
The computer died. I will not make the sd card backup.

Marry Xmas to all.

Wow.... Oreo release and directly 8.1 weeeeeeeeeeee!
Didn't expect this before the new year, what a surprise.
Thanx you @fire855
Thank you MAD-team

Hi,
How to install ROM and gapps?
On TWRP or using flash?
Thank you

Should we come from the last 7.1.2 build (which has different partitions from stock)?

I really appreciate the work, but it's somewhat unflashable. New recovery is not stable, it gets stuck sometimes. Also I didn't manage to bring 8.1 to run with Gapps yet.
€: To provide somewhat more information: System crashes when running playstore.
€2: Full wipe made, advanced wipe and wiped every partition. It gets stuck coincidential, there's no proper reason for it, it got stuck once when I flashed MadOS itself, second time it got stuck flashing gapps, so I hope I get it run that night...
€3: Recovery freezes and after 30 seconds (approx) phone reboots.
€4: Nope, I don't get it to work, goddamnit. It freezes almost immediately after I enter my pin.

Help please...
I install new TRWP OREO on old twrp...
when reboot the phone shutoff and does nothing... i cant turn on...

TJFA81 said:
Help please...
I install new TRWP OREO on old twrp...
when reboot the phone shutoff and does nothing... i cant turn on...
Click to expand...
Click to collapse
Hold VOL+ and POWER when rebooting. Then you can choose to boot into TWRP. There you copy the new recovery image and then flash Oreo.

Xorianator said:
Hold VOL+ and POWER when rebooting. Then you can choose to boot into TWRP. There you copy the new recovery image and then flash Oreo.
Click to expand...
Click to collapse
I cant...
When choose recovery the phone freezes. black screen
To install new TWRP OREO its only necessary flash the file recovery.img???

TJFA81 said:
I cant...
When choose recovery the phone freezes. black screen
To install new TWRP OREO its only necessary flash the file recovery.img???
Click to expand...
Click to collapse
Yes, you only have to bring the recovery up again.
What you can also do is: Go back to 7.1 (flash it with SPflashtool) and then do the steps

Xorianator said:
Yes, you only have to bring the recovery up again.
What you can also do is: Go back to 7.1 (flash it with SPflashtool) and then do the steps
Click to expand...
Click to collapse
I cant go to recovery...
Can start the phone but cant go to recovery after flash new recovery file posted on MAD facebook.
I dont have 8.1 because of that, just did the first step anda now cant go to recovery

TJFA81 said:
I cant go to recovery...
Can start the phone but cant go to recovery after flash new recovery file posted on MAD facebook.
I dont have 8.1 because of that, just did the first step anda now cant go to recovery
Click to expand...
Click to collapse
Reflash 7.1 image using SPflashtool, I made a guide for this There you go. Then you can repeat.
Okay so 8.1 is not working at all... I get somewhat a weird failure on screen, the screen "sacks" down (main UI Activity just "fall down", status bar is still up) and then it freezes... Looking forward to get this fixed soon.
€: And the boot time is horrible, before I see a screen it's black for idk 2 Minutes
€3: Nvm lol, actually the phone is now unable to boot in System....
€4: Give it a try with "optional" F2FS File system step, let's see.
€5: Nope, didn't fix a thing. So well, at least I could capture this "sack down" thing:
The red line is where the display ends. As you can see the symbols are still in place. The blue line marks where the activity "sack down" and if this happens (which happens just on coincidence) nothing will happen any further, system's frozen and it reboots afterwards.

TJFA81 said:
Hi,
How to install ROM and gapps?
On TWRP or using flash?
Thank you
Click to expand...
Click to collapse
TWRP

Xorianator said:
Reflash 7.1 image using SPflashtool, I made a guide for this There you go. Then you can repeat.
Okay so 8.1 is not working at all... I get somewhat a weird failure on screen, the screen "sacks" down (main UI Activity just "fall down", status bar is still up) and then it freezes... Looking forward to get this fixed soon.
€: And the boot time is horrible, before I see a screen it's black for idk 2 Minutes
€3: Nvm lol, actually the phone is now unable to boot in System....
€4: Give it a try with "optional" F2FS File system step, let's see.
Click to expand...
Click to collapse
Thank you, already did it... reflash recovery.img but by spflashtool. Now im inside twrp3.2.1...
Now its time to try install oreo and gapps

cedricboquiren said:
Should we come from the last 7.1.2 build (which has different partitions from stock)?
Click to expand...
Click to collapse
Yes, the latest 7.1.2 is mandatory. Added this to the first post now too.

I tried to install the new rom, after I installed the new twrp, the phone is still restarting, I tried to return to 7.1.2 with spft but no success even does not connect with the laptop, what I could do they do?

[10] LineageOS 17.1 for z3c

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
[COLOR="Purple"]#include <std_disclaimer.h>[/COLOR]
[COLOR="Navy"]/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/[/COLOR]
Introduction
LineageOS, an open-source Android distribution, is available for several devices,
with more being continuously added thanks to the biggest, yet ever growing, Android open-source community.
Join us and breathe new life in your device, be it old or new.
Click to expand...
Click to collapse
If you don't know LineageOS and would like to read about it before installing it you can take a look at the official Website.
Features
Individuality
Customization is paramount to productivity.
That’s why LineageOS promises to push for user personalization and preference.
Everyone is unique and your device should be too.
Click to expand...
Click to collapse
Security
Your data, your rules. With powerful tools such as Privacy Guard, you are in control of what your apps can do whenever you want.
Trust will help you understand the security of your device and warn you about possible threats.
We take security very seriously: that’s why we deliver security updates every month to all our supported devices.
And to make your device more secure, lock everything behind an enhanced lock screen.
Click to expand...
Click to collapse
Longevity
LineageOS extends the functionality and lifespan of mobile devices from more than 20 different manufacturers thanks to our open-source community of contributors from all around the world.
Click to expand...
Click to collapse
Installation instructions
Prerequisites:
Unlocked Sony Xperia Z3 Compact
Fastboot drivers to install TWRP
Micro-USB Cable to connect your phone to your computer
Install:
Reboot to TWRP. *
Wipe cache, dalvik cache, data and system.
Install ROM.
Install 10.0 Gapps for ARM. **
* recommended TWRP: Post #2
** optional, opengapps
Downloads
Download the ROM
Over the Air Updates
To use OTA updates please read Post #2
Sources
DEVICE:
https://github.com/LineageOS/android_device_sony_z3c
https://github.com/LineageOS/android_device_sony_msm8974-common
https://github.com/LineageOS/android_device_sony_shinano-common
KERNEL:
https://github.com/LineageOS/android_kernel_sony_msm8974
Addons
OpenGapps
Magisk
Thanks
Whole LineageOS Team for this amazing ROM
@koron393
@SpiritCroc
@Myself5
@nailyk
@drakonizer
@rcstar6696
@tomascus
I hope I haven't forgot anyone
Bugs
Current hardware support state: Gist
WHAT'S BROKEN
You tell me.
XDA:DevDB Information
LineageOS 17.1 for z3c, ROM for the Sony Xperia Z3 Compact
Contributors
NeoArian
ROM OS Version: Android 10
ROM Kernel: Linux 3.x
ROM Firmware Required: 23.5.A.1.291
Based On: AOSP
Version Information
Status: Beta
Created 2019-10-02
Last Updated 2020-01-04

OTA and TWRP recovery
Over the Air Updates
My upload script automatically pushed OTA updates to my GitHub.
If you want to make them visible through the Updater you can flash the attached magisk module LineageOS-17.1_z3c-OTA-v1.zip or add the line
Code:
lineage.updater.uri=https://raw.githubusercontent.com/ArianK16a/OTA/lineage-17.1/z3c.json
manually to your build.prop. You should use the recommended TWRP so that the updates flash fine.
TWRP recovery
TWRP 3.3.1 for our z3c with Android 10!
The TWRP for Android 10 is attached to this post.
Source is available at: https://github.com/z3c-pie/twrp_device_sony_z3c/tree/android-10.0
Changelog for twrp-3.3.1-1-z3c-20191212-sar.img
Improved System as root support, /system is a symlink to /system_root/system now
Changelog for twrp-3.3.1-1-A10.0-z3c.img
Added Bootlogo, booting from offline state will display the original sony logo now instead of nothing
Fixed fastboot boot
Updated kernel cmdline from 23.5.A.1.291
How to install this build:
Reboot to fastboot by holding volume up while connecting your device to your computer
Open a terminal and move to the directory with TWRP in it
Rename the downloaded image to twrp.img
Type
Code:
fastboot flash recovery twrp.img
Boot into TWRP while the device is powered off press the power and volume down button
Feel free to ask questions or give feedback about TWRP here .
Have a nice day!
Additional information about the recovery on this device:
First of all we should make the basics clear: On our Z3 Compact we have got a bootloader update which can boot a recovery from powered off state by pressing volume down and the power button. Because we haven't ever had this updated bootloader and not all sony devices received the update, there have been some intelligent people who brought a special init binary which can handle recovery boots during a normal boot. This means when using advanced reboot from the ROM or pressing a volume key while the sony logo appears at boot. https://github.com/LineageOS/android_device_sony_common/commits/lineage-16.0
To make this work there is this method to extract the ramdisk: https://github.com/LineageOS/androi...eage-16.0/extract_ramdisk/extract_ramdisk.cpp which uses zlib to decompress it. So far so good, zlib can decompress the default compression for recovery ramdisk which is gzip. However LZMA is more effective to reduce the size so we took it's advantage: https://github.com/omnirom/android_...mmit/885b01223a460d3f2500155ea415bdc8573679bc in order to fit recoverys compiled from recent environments (android-9.0 in my case) into our small FOTAKernel partition.
According to this change the init_sony can't handle the recovery boot anymore because it can't decompress the recovery's ramdisk so nailyk and Diewi (as far as i know) added support to decompress LZMA compressed ramdisk's with this chain: https://github.com/sonyxperiadev/device-sony-common-init/pull/20/commits
However these commits have never been merged into the LineageOS/android_device_sony_common nor the sonyxperiadev/device-sony-common-init. Since your ROM, CarbonROM, is using a fork of LineageOS/android_device_sony_common is missing these commits the recovery boot fails with a kernel panic, like this: https://del.dog/egawososux.htm
So you can either use a recovery which doesn't compress the ramdisk with LZMA (for example the one from here: https://forum.xda-developers.com/z3-compact/development/recovery-twrp-3-2-3-0-aries-t3837192 or ask your ROM developer to pick the according commits into the sony_common tree/use my fork of LineageOS's one https://github.com/z3c-pie/android_...mits/fa85dfcc07f42d73f9a1abf1f4c82d8bf0486a93 which would enable you to use recent TWRP builds with a LZMA compressed ramdisk.
I hope i presented it clearly and in the right way,
Have a nice day!
EDIT: Minimized patch for LZMA is available here: https://review.lineageos.org/c/LineageOS/android_device_sony_common/+/252923
Click to expand...
Click to collapse

The new build is up!
Get it from here: https://sourceforge.net/projects/ep...age-17.0-20191002-UNOFFICIAL-z3c.zip/download
Make sure to use the new TWRP from Post #2 because Android 10 introduces System-as-Root which can lead to weird behaviour in the old TWRP.
Note that there are not all features from LineageOS 16.0 ported over yet and there can be unexpected, yet unlisted bugs.
MY personal hardware support list can be found here: https://gist.github.com/ArianK16a/1e46c463a5c910efb322d9cf0e16c3c0 but as always, i can't guarantee you anything!
Happy flashing!

I will try, thx :>
but there are no opengapps for 10,
what about this? will be good?
https://www.cyanogenmods.org/download-gapps-for-android-10/

hah ok now I don`t know anything... ;/
still same problem with this freakin camera and torch exactly like in v16
all my steps:
1.
flashtool64 -> Stock Android 6.0.1 for D5803 - 23.5.A.1.291 - Unbranded - Baltic Generic (1288-5413)
https://forum.xda-developers.com/z3-compact/general/list-stock-firmwares-d5803-d5833-t2906706
2.
TWRP for 6.01 - with this https://forum.xda-developers.com/z3-compact/general/recovery-root-mm-575-lb-t3418714
Kernel .575 -> recovery for mm575 ->kernel .291
3.
installation of yours TWRP - twrp-3.3.1-A10.0-z3c
4. in twrp 3.3.1 wipe cache, dalvik cache, data and system, rom installation
5. camera and torch doesn`t working ;/ "camera keeps stopping" and torch is greyed out

NIce, thank you

hhpl said:
hah ok now I don`t know anything... ;/
still same problem with this freakin camera and torch exactly like in v16
all my steps:
1.
flashtool64 -> Stock Android 6.0.1 for D5803 - 23.5.A.1.291 - Unbranded - Baltic Generic (1288-5413)
https://forum.xda-developers.com/z3-compact/general/list-stock-firmwares-d5803-d5833-t2906706
2.
TWRP for 6.01 - with this https://forum.xda-developers.com/z3-compact/general/recovery-root-mm-575-lb-t3418714
Kernel .575 -> recovery for mm575 ->kernel .291
3.
installation of yours TWRP - twrp-3.3.1-A10.0-z3c
4. in twrp 3.3.1 wipe cache, dalvik cache, data and system, rom installation
5. camera and torch doesn`t working ;/ "camera keeps stopping" and torch is greyed out
Click to expand...
Click to collapse
I don't understand what you are doing after you flashed stock. Can you also format data within my twrp? I have recognised that the /data partition size has been set wrong in most older TWRP's.
hhpl said:
I will try, thx :>
but there are no opengapps for 10,
what about this? will be good?
https://www.cyanogenmods.org/download-gapps-for-android-10/
Click to expand...
Click to collapse
There are GApps: https://sourceforge.net/projects/opengapps/files/arm/beta/20190928/

NeoArian said:
I don't understand what you are doing after you flashed stock. Can you also format data within my twrp? I have recognised that the /data partition size has been set wrong in most older TWRP's.
Click to expand...
Click to collapse
ok I had something in my head that I needed first this marshmallow recovery... I don`t know why
but now I flashed once again 291 and then yours twrp and wiped all the stuff ofc included data and still torch and camera doesn`t work ;/

hhpl said:
I don't understand what you are doing after you flashed stock. Can you also format data within my twrp? I have recognised that the /data partition size has been set wrong in most older TWRP's.
ok I had something in my head that I needed first this marshmallow recovery... I don`t know why
but now I flashed once again 291 and then yours twrp and wiped all the stuff ofc included data and still torch and camera doesn`t work ;/
Click to expand...
Click to collapse
Format is not wipe. Make sure that twrp asks you to confirm by typing yes.

NeoArian said:
Format is not wipe. Make sure that twrp asks you to confirm by typing yes.
Click to expand...
Click to collapse
ok done, once again nothing new, still same situation

Can this ROM be installed on top of LineageOS 16 without wape?

Camera and Bluetooth are fine.
Flashing the only gapps for Android 10 I found made the navbar buttons not to work.
I guess we should wait for better gapps build.
Great anyway, thanks

marcogiannetta said:
Camera and Bluetooth are fine.
Flashing the only gapps for Android 10 I found made the navbar buttons not to work.
I guess we should wait for better gapps build.
Great anyway, thanks
Click to expand...
Click to collapse
Are you talking about the GApps I posted a few posts back? https://sourceforge.net/projects/opengapps/files/arm/beta/20190928/ If I remember correctly I didn't have problems while I tested them...

NeoArian said:
Are you talking about the GApps I posted a few posts back? https://sourceforge.net/projects/opengapps/files/arm/beta/20190928/ If I remember correctly I didn't have problems while I tested them...
Click to expand...
Click to collapse
No, I found a beta version on Google.
Gotta check again with the one you provided, I'll edit this post in a while
Edit: buttons don't work again

marcogiannetta said:
Camera and Bluetooth are fine.
Flashing the only gapps for Android 10 I found made the navbar buttons not to work.
I guess we should wait for better gapps build.
Great anyway, thanks
Click to expand...
Click to collapse
wow, so what I`m doing wrong... could you tell me how you install this rom step by step and what rom you had before? steps before installation and steps after or something, I have installed this rom 10 times and never got my camera work, that is crazy

hhpl said:
wow, so what I`m doing wrong... could you tell me how you install this rom step by step and what rom you had before? steps before installation and steps after or something, I have installed this rom 10 times and never got my camera work, that is crazy
Click to expand...
Click to collapse
The same basic steps you'll find in the OP

marcogiannetta said:
Camera and Bluetooth are fine.
Flashing the only gapps for Android 10 I found made the navbar buttons not to work.
I guess we should wait for better gapps build.
Great anyway, thanks
Click to expand...
Click to collapse
I've experienced the same issue after installing gapps - only back button works. Gesture navigation is working fine.
Other bugs I've noticed:
-battery icon style cannot be changed
-launching camera app with hardware button doesn't work
-system accent color cannot be changed (there is only one option listed)

Barciej33 said:
Other bugs I've noticed:
-battery icon style cannot be changed
-launching camera app with hardware button doesn't work
-system accent color cannot be changed (there is only one option listed)
Click to expand...
Click to collapse
You must read 1st to 3rd post.
LOS17 is just getting started.
Note that there are not all features from LineageOS 16.0 ported over yet and there can be unexpected
Click to expand...
Click to collapse

@NeoArian Any chance for a screen recording of how it runs?

JamesMars said:
@NeoArian Any chance for a screen recording of how it runs?
Click to expand...
Click to collapse
No? If you are interested you can test it yourself.
I have my holidays now anyway.

[ROM][10][Q][Flo][UNOFFICIAL] crDroid 6.0 (12/30/2019)

crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today. We're mainly based on LineageOS so use custom kernels compatible with them!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Always Have a full functional Backup. Just in case if you want to!
First time installing crDroid to your Nexus 7 2013 or coming from another ROM:
** Make sure you're running a proper working Recovery (TWRP)
1) Copy crDroid zip, gapps zip, to your device
2) Boot into Recovery
3) Wipe everything except internal storage.
4) Flash ROM
8) Flash gapps
9) Boot up
For root, AFTER you boot into the ROM, you can go back to recovery and install Magisk v20.1 (whatever is most recent).
Upgrading from earlier version of crDroid:
The only difference between clean flash as above and upgrading is you just wipe system & cache, leaving data. Everything else is the same. ***Remember to always clean flash before reporting problems. Clean flashing is always the best method of ROM install.
KNOWN ISSUES
- NFC has been removed and disabled so it's unusable at the moment.
- Navigation bar glitches sometimes.
- Since it's Android Q you may have problems with certain apps not working properly. You will have to tell the developer of the certain app to update their app to be compatible with Android Q. This is not a problem with the ROM.
- Compass seems to not be working.
- Encryption does not work.
- Several crDroid features may or may not be available yet.
- You will be required to repartition your system to at least 1.3gb.
- You tell us!
Downloads:
Latest 12/30 build for Flo is here: https://www.androidfilehost.com/?fid=4349826312261688703
Download folder for Flo is here: https://www.androidfilehost.com/?w=files&flid=302533
GAPPS: https://sourceforge.net/projects/opengapps/files/arm/beta/20190928/
Sources:
Device Tree: https://github.com/followmsi/android_device_asus_flo/tree/los-17.0
Vendor Tree: https://github.com/followmsi/android_vendor/tree/flo-deb-lineage-17.0
Kernel Tree: https://github.com/followmsi/android_kernel_google_msm/tree/followmsi-10
Thanks to:
- Google
- LineageOS
- SlimRoms
- AOSPA (Paranoid Android)
- OmniRom
- NamelessROM
- Followmsi (For device, vendor, and kernel sources)
- Many others... (if you're feeling upset being out of the thanks list just send a PM )

Reserved for future use
Happy flashing and enjoy android 10 Q!

I have a problem installing the GApps with ROM build 20191126 . Coming from LineageOS 16.0 (flo) I wiped everything except of the internal storage.
But I always get "Incopatible Android ROM detected. This GApps pkg is for Android 10.0.x ONLY. Please download the correct version for your ROM: 6.0.1 (SDK 23)"
Is this a problem of the ROM or the GApps package?
Frapl

Frapl said:
I have a problem installing the GApps with ROM build 20191126 . Coming from LineageOS 16.0 (flo) I wiped everything except of the internal storage.
But I always get "Incopatible Android ROM detected. This GApps pkg is for Android 10.0.x ONLY. Please download the correct version for your ROM: 6.0.1 (SDK 23)"
Is this a problem of the ROM or the GApps package?
Frapl
Click to expand...
Click to collapse
Have you messed with the build.prop file or any other system files located in system/system in twrp? I did that accidentally and the only way to get it fixed was to reflash the rom and wipe everything except internal storage then reboot recovery then flash the rom and then reboot recovery again and then flash gapps. Try that and make sure you have the latest version of twrp recovery

Hi all.
Just downloaded crDroid to give a test spin to see how it is.
I'm primarily a gzr, aex guy.
LineageOS and crDroid are my next rom choices.
A note about OpenGapps 10.
It has issues mounting system on some devices.
Installing ROM, rebooting into system and then rebooting back into recovery, works.
Honestly takes too long for me.
A quicker way that normally works is.
- Install ROM.
- Mount (or unmount and remount) system in TWRP.
- Install OpenGapps 10.
- Reboot to system.
- - or install Magisk, kernel, what ever else and then reboot to system.
At first glance, crDroid seems to be working well. :highfive:
Cheers.

Thanks for the suggestion to Mount the system in TWRP. That fixed my issue.

JT1510365 said:
Have you messed with the build.prop file or any other system files located in system/system in twrp? I did that accidentally and the only way to get it fixed was to reflash the rom and wipe everything except internal storage then reboot recovery then flash the rom and then reboot recovery again and then flash gapps. Try that and make sure you have the latest version of twrp recovery
Click to expand...
Click to collapse
I did not modify anything, just coming from LineageOS 16.0 (by ripee) wiped everything, except the internal storage, and installed your rom using TWRP-3.3.1-1_UA. My current solution is to modify the GApps package install script so the version check is not failing. At the moment everything is running fine.
Frapl

Thank you @JT1510365 for giving Flo another Android 10 ROM.
Coming from @followmsi aex 7 Aplha.
I see you mentioned 1.5Gb required for system, but I have partitioned with @followmsi 1280_120 script. After reading a post by Clamor about partitions to 1.5Gb required complete format look complex. I skipped the process.
I'm able to clean flash your ROM, with OpenGapps beta Pico (unmount-remount system in TRWP, with @ipdev suggestion).
Run really smoothly so far, but I did encounter 2 problem.
1) video glitch, a fix was given by @ipdev to mod media_codecs.xml (see attached screenshot)
2) when tap battery in settings, it crashed. Return to home screen.
Thanks again!
Update to 2.
After pressed battery in settings, crashed back to home screen. A small window appeared, I select app info and settings info appear. Did the clear cache, no go. Clear cache and storage (Bad idea) and reboot. After the cdroid bootanimation, screen just faded to Black. No lock screen, not able get back into ROM.
Did a complete clean install of ROM only, reboot into ROM. No other things are added, tapping battery in settings still crashed. Is no biggy, does not take away the smoothness of the ROM.
Anyone know how to get weather next to the home screen at a glance?

This is such a fantastic ROM. Thank you so much JT1510365!
No hassle clean install, extremely solid & dependable, and now the daily driver on the FLO.
I do very much wish that it was available for the DEBs.

blambo said:
This is such a fantastic ROM. Thank you so much JT1510365!
No hassle clean install, extremely solid & dependable, and now the daily driver on the FLO.
I do very much wish that it was available for the DEBs.
Click to expand...
Click to collapse
wish granted will try making a deb build tonight
Thank you for your kind words

Happy New year @JT1510365! ?
All the best to you in 2020!
Thanks for creating ROM for all of us, really appreciates your time! ?

JT1510365 said:
wish granted will try making a deb build tonight
Thank you for your kind words
Click to expand...
Click to collapse
Your work, help, and support are very much appreciated JT1510365. Please just take it slow and have fun with it.
Let me know if I can be of help in any way.
And, have a happy, healthy & prosperous New Year!

blambo said:
Your work, help, and support are very much appreciated JT1510365. Please just take it slow and have fun with it.
Let me know if I can be of help in any way.
And, have a happy, healthy & prosperous New Year!
Click to expand...
Click to collapse
Thank you and I will let you know when the deb build is available

Anyone having issues with camera on this build?

JT1510365 said:
Anyone having issues with camera on this build?
Click to expand...
Click to collapse
Camera (still picture and video recording) are working fine for me.

JT1510365 said:
Thank you and I will let you know when the deb build is available
Click to expand...
Click to collapse
I peeked into your crDroid 10 DEB upload folder and found it.
You have done it!
Wipe everything but internal, install crDroid 10 DEB, install open_gapps-arm-10.0-nano-20190928-BETA, install Magisk 20.03. Wipe caches.
Very fast first boot time. No hiccups.
Quick page to page crD setup.
Set smallest width to 703.
Playstore/Google account login no issues.
Backup+ restore no issues.
Magisk SafetyNet Check: Success. No issues.
Good battery life & charge time, no issues.
Screen rotation no issues.
Camera fine no issues.
Networking & VPN Hotspot no issues.
LTE signal XLNT!
So far, this puppy is solid as a rock. Everything that I use it for works. (Wireguard, VPN Hotspot, Netflix, Plex, MXPlayer Pro HW+, email & web browsing, Juice SSH, AdminHands, etc.) No crashes/FCs/errors so far.
A great many thanks to you for your work, and for breathing new life into these DEB & FLO JT1510365! -Android 10 for DEB is a unique challenge, and very much appreciated.
Magnificent!

Is there any custom Kernels that work with 10 roms?

twist3d0n3 said:
Is there any custom Kernels that work with 10 roms?
Click to expand...
Click to collapse
No, sorry

Thanks!

hey how did you got netflix running? cant here. thx!!