HI,
i was replacing the screen and suddenly my phone went in coma the sreen has been changed but no recovery or fast boot is accessible and even my pc is detecting it as mtp device and in adb cmd it says unauthorized or offline i need your help or my brother will kill me:crying::crying::crying: please help asap
i tried the hardbrick method but the driver installation dint succeed and the phone is still recognized as android device or mtp device.
MTP device and adb recognizes it means the phone is running fine! Check the display it sounds like it's issue.. And also when connected to PC try holding down power button and see if mtp device indication goes away (hold it for like 10 secs)
Transmitted via BACON
Related
Hello,
i tried to update my Nexus 5 to 5.1 by using adb sideload.
First i installed the driver which did not work, i removed them and used an another and the device was recognized after that on windows.
So I started the sideload and it stopped at about 60% and the USB Connection was lost. I can not see the device in the device manager and if i use my linux computer i can not see any new entry if i use 'dmesg'. I used an another USB cable to check if this is broken. I tried to format the cache and it now still boots to the recovery mode.
Can it be that the USB driver in the N5 is broken now?
I wanted to prevent a factory reset, but i dont think that a FR will help here if i can not connect even in the recovery mode
Any suggestions?
Thank you!
wwwiesel said:
Hello,
i tried to update my Nexus 5 to 5.1 by using adb sideload.
First i installed the driver which did not work, i removed them and used an another and the device was recognized after that on windows.
So I started the sideload and it stopped at about 60% and the USB Connection was lost. I can not see the device in the device manager and if i use my linux computer i can not see any new entry if i use 'dmesg'. I used an another USB cable to check if this is broken. I tried to format the cache and it now still boots to the recovery mode.
Can it be that the USB driver in the N5 is broken now?
I wanted to prevent a factory reset, but i dont think that a FR will help here if i can not connect even in the recovery mode
Any suggestions?
Thank you!
Click to expand...
Click to collapse
Hmmm, intermittent ADB occured before attempted sideload falure.
Boot to bootloader and see if you can
fastboot devices
If you can detect the device in fastboot, but still cant ABD, then maybe take a look here http://forum.xda-developers.com/showpost.php?p=59420668&postcount=322
After looking there, if you are absolutely certain that it is not a driver issue, you might be looking at a hardware failure of the charging port.
https://www.youtube.com/watch?v=qqCEXEmcj4Y
If it were me, I'd replace the port and re-attempt ADB sideload.
Hello! Im new here
The thing is that I bought a bricked OPO today hoping that I could fix it. I've been like 4-5hrs straight trying and nothing!
The real problem is that my OPO is not being recognized by my computer. (Im running Windows 8.1)
When I connect it to the PC the device vibrates but no sound, I go to device manager and it's not there (not as QHSUSB_BULK, not as UNKNOWN DEVICE, not as nothing, it just dont exist)
I installed the Samsung drivers, OnePlusRestoreTool, Bacon Root ToolKit, OnePlus One Toolkit and nothing seem to work...
I tried to get it into FastBoot mode but it ony vibrates every 10 consecutive seconds I hold the vol up + pwr button and NOTHING happen, screen remain black and no sound by my PC recognizing the device...
I tried alternate USB, alternate cable and nothing...
If you guys can help me that would be awesome!
Thanks, and sorry for my bad english.
Maximuseml said:
Hello! Im new here
The thing is that I bought a bricked OPO today hoping that I could fix it. I've been like 4-5hrs straight trying and nothing!
The real problem is that my OPO is not being recognized by my computer. (Im running Windows 8.1)
When I connect it to the PC the device vibrates but no sound, I go to device manager and it's not there (not as QHSUSB_BULK, not as UNKNOWN DEVICE, not as nothing, it just dont exist)
I installed the Samsung drivers, OnePlusRestoreTool, Bacon Root ToolKit, OnePlus One Toolkit and nothing seem to work...
I tried to get it into FastBoot mode but it ony vibrates every 10 consecutive seconds I hold the vol up + pwr button and NOTHING happen, screen remain black and no sound by my PC recognizing the device...
I tried alternate USB, alternate cable and nothing...
If you guys can help me that would be awesome!
Thanks, and sorry for my bad english.
Click to expand...
Click to collapse
Hi mate, am in exact same situation as yours.
Did you have any luck fixing it?
Maximuseml said:
Hello! Im new here
The thing is that I bought a bricked OPO today hoping that I could fix it. I've been like 4-5hrs straight trying and nothing!
The real problem is that my OPO is not being recognized by my computer. (Im running Windows 8.1)
When I connect it to the PC the device vibrates but no sound, I go to device manager and it's not there (not as QHSUSB_BULK, not as UNKNOWN DEVICE, not as nothing, it just dont exist)
I installed the Samsung drivers, OnePlusRestoreTool, Bacon Root ToolKit, OnePlus One Toolkit and nothing seem to work...
I tried to get it into FastBoot mode but it ony vibrates every 10 consecutive seconds I hold the vol up + pwr button and NOTHING happen, screen remain black and no sound by my PC recognizing the device...
I tried alternate USB, alternate cable and nothing...
If you guys can help me that would be awesome!
Thanks, and sorry for my bad english.
Click to expand...
Click to collapse
1st of all uninstall QHSUSB_BULK this driver,after this download qualcomm 9008 driver google it and install this driver then you can connect your #bacon it going to detected and dont forgot this process has to be done test mode and refer thia thread also http://forum.xda-developers.com/oneplus-one/general/guide-unbrick-oneplus-one-t3013732
sid_844 said:
1st of all uninstall QHSUSB_BULK this driver,after this download qualcomm 9008 driver google it and install this driver then you can connect your #bacon it going to detected and dont forgot this process has to be done test mode and refer thia thread also http://forum.xda-developers.com/oneplus-one/general/guide-unbrick-oneplus-one-t3013732
Click to expand...
Click to collapse
First of all thanks for your reply.
I have seen this thread but as you can see to uninstall the old driver I need to:
' Go to Device Manager, right click on the bricked USB device (QHSUSB_BULK or Qualcomm HS-USB QDLoader 9008) and go to Properties, click on Driver, then select Uninstall. Check the box to remove driver files, if prompted...'
But the device is not seen by the device manager.
Someone suggested in an other thread that I need just to press (not hold) power + volume button.
I will try that and let you know.
By the way what is 'test mode'?
hello,
guys my android phone canvas spark is totally dead after a rom installation but whenever i connect it to the pc a connection notification sound pops up.
but to flash an another rom I have to switch off my phone but how should I switch off my phone with blank screen which is not turning on and my battery is in-built.
how can i identify that my phone is off by connecting it to my pc.
dthackandjob said:
hello,
guys my android phone canvas spark is totally dead after a rom installation but whenever i connect it to the pc a connection notification sound pops up.
but to flash an another rom I have to switch off my phone but how should I switch off my phone with blank screen which is not turning on and my battery is in-built.
how can i identify that my phone is off by connecting it to my pc.
Click to expand...
Click to collapse
Try connecting to adb and type:
adb devices
if your device is connecting it will list your device. If you are connecting correctly then try the commands in the link below to see if you can use one of its modes to fix the device.
http://zidroid.com/boot-android-devices-to-download-fastboot-recovery-mode-using-adb/
The device can be powered on without the power button with the command:
adb reboot
you may have to run the sudo command before the adb reboot command works.(this may not work on all devices)
I have a Huawei p20 with a broken screen and the touch does not work, after research I discovered that the only solution to get all my data back is via adb (and perhaps also fastboot), only that when I connect it to the pc it gives access, it recognizes the but the device is unauthorized instead in recovery mode it does not recognize it, but if I try it in fastboot mode it recognizes it as fastboot, how can I use adb?
Noristay said:
(...) when I connect it to the pc it gives access, it recognizes the but the device is unauthorized instead in recovery mode (...)
Click to expand...
Click to collapse
Maybe you will find something interesting in the thread:
Bypass secure USB debugging prompt on phone with broken screen
Hello everyone, I have a Samsung Galaxy S II (I9100) with Cyanogenmod 11 (Snapshot M12) installed. Recently I dropped my phone and the screen was completely shattered. The display does not work, neither does the touch. However, the phone works...
forum.xda-developers.com
ze7zez said:
Maybe you will find something interesting in the thread:
Bypass secure USB debugging prompt on phone with broken screen
Hello everyone, I have a Samsung Galaxy S II (I9100) with Cyanogenmod 11 (Snapshot M12) installed. Recently I dropped my phone and the screen was completely shattered. The display does not work, neither does the touch. However, the phone works...
forum.xda-developers.com
Click to expand...
Click to collapse
unfortunately this post doesn't help me, as it tells them how to activate usb debugging, my problem is that when i'm in recovery it doesn't show me that my device when i type adb devices command
Looks USB is OK, because Fastboot works. But I guess that ADB isn't properly installed, especially ADB Verification failed. So you can't successfully run ADB, neither when phone is in normal mode nor when in recovery mode
Hi Guys , Have pixel 3 I cannot connect my device to PC as MTP but it can do bootloader mode when tap out the battery and put it back that strap and then plug on USB so it will work I found this solution after few months, but when I boot twrp I cannot access otg,and mtp enables unable to mount storage USB it not detected simply ,
I cannot make sideload or adb push anything my PC only detected on bootloadee mode after recovery it get ejected no recognized ,
I tried to install custom ROM manually like using only fastboot mode but flashing images like system,product,vendor everything needs to be " fastboot d" mode when I get this mode my device get disconnected why this happens to me I changed cables ,
Ports ,latest platform tools but I cannot access userspace or adb please help me I didn't sleep for 2 days its my mom phone.