[Completed] Galaxy mini 2 with broken screen - XDA Assist

Well... I destoyed my phone. And i want to save all my data.. The screen is broken, the power button and the home button work. The volume buttons aren't working, maybe. I can turn on the phone, but nothing else. Some (probably) helpful infos:
I have Clockworkmod, but without volume buttons I can't use it
I tried to connect the phone at the pc, nothing happenned
Probably the debug usb is disabled
I tried a lot of programs
I installed adb-fastboot, "error: no device found"
The touch works (not totally?)
I'm able to unlock my phone, because I remember the path..
If you need something else.. ask. I won't repair it, I wanna just save my files into the sdcard0.
**I'm not english, sorry if there are mistakes..
Thanks, SirVava

Hello and welcome on XDA,
please ask here. Your device don't have a device forum here on XDA:
Android Q&A, Help & Troubleshooting
Kind regards
Trafalgar Square
XDA Assist

Related

[Completed] Am I so awesome that I rly bricked my phony?

Hi, I was about to install myself a new rom and I probably badly cocked up.
well to make it short, I was following instructions here https://wiki.cyanogenmod.org/w/Install_CM_for_honami
and it went good, till I misunderstood one thing, that i need to get phone in fastboot and then navigate in PC cmd to boot.img, well I did, but I was so stupid (I realized moment later) that I had separated the boot.img file from rest of the stuff in cyanogenmod folder. And I booted it wia fastboob and rebooted my phone....
well... red light started and that was it...I have been waiting some time if something will happen but nothing.
then tried to start it, reset it, nothing helped...all the phone does is only the red led will start if I hold power and vol + and if I hold power and vol +- it vibrates once, and after moment it vibrates three times.
my phone is xperia Z1 as you can see from cyanogenmod wiki page -honami
so my question is simple... is there any way to fix this?
Iam rly disapointed it can be broken so easily just by one tim booting wrong file? I dont believe there is no way how to save it... but my PC doesnt recognize the device anymore so I cant fix it or dont know how...
pls help
Hello and thank you for using XDA Assist,
please create an account and ask your question here:
Xperia Z1 Q&A, Help & Troubleshooting
The experts in your device Q&A forum should be able to help you.
Kind regards
Trafalgar Square
XDA Assist

[Completed] Help with rooting gone wrong on Samsung GT-N5120

Hi!
My neighbors (11-year old) son apparently tried to root their Samsung GT-N5120 with something called King Root(??). I don't know more than that and they asked me to fix it cause (you know computers) -.-.
The problem is that it's stuck in boot loop. It boots up and it shows the screen and all but it doesn't happen anything and then it reboots. Now what i've tried is to start it in recovery mode (Volume Up + menu button + power button) and i've tried to do a factory reset but it didn't work. From what i've read i think he has overwritten those files that the factory reset needs. So what can I do? It doesn't seem to be bricked since it starts and i can start it in both recovery mode and download mode. My computer reacts when I plug it in and tries to install drivers and so forth (but it won't show up on My Computer). So something probably can be done I just don't know what to do. Any ideas?
/Johan
Hello and thank you for using XDA Assist,
please create an account and ask your question here:
Galaxy Note 8.0 Q&A, Help & Troubleshooting
The experts should be able to help you!
Kind regards
Trafalgar Square
XDA Assist

[Completed] Flash error? please help

I was going to install a custom ROM on my Coolpad Catalyst android phone, I rooted it, and followed a tutorial on how to flash it.
After attempting to flash my phone with TWRP, when rebooting it gave me a screen saying
"Download and install the package?
This may expose the device to faults and hidden troubles.
Press the Volume Up key to confirm
Press the Volume Down key to concel"
Yes, it is spelled "concel"
upon pressing up or down nothing happens, unless i plug my phone in to a charger then when i press down it reboots to the same screen and if i press up it does nothing at all.
If i try any of the volume+power whatever hotkeys it boots into the same screen aswell. (I tried all of the hotkeys)
When i boot it, it shows the coolpad logo then goes straight to the screen.
Don't know how to fix it, would really love some help
Hello and thank you for using XDA Assist,
please create an account and ask in our Android Q&A section:
Android Q&A, Help & Troubleshooting
The experts there should be able to help you.
Kind regards & good luck
Trafalgar Square
XDA Assist

[Completed] Huwawei P8 Lite - after unscessful root - shutdown just after logo display each time

Hello All,
Well I tried and searched evrything and everywhere before requesting your assistance, please help
I tried to root my new Huwawei P8 Lite, but did something worng (instruction were in spanish...)
now , once i Switch on the phone, it vibrates, displays the logo and then swith off automatically.
I dont have access to fastboot, each time I try
volum down+ Power
volum up + power
Volume up + volume down + power
but oonly the logo diplay, and then phone swith off
I tried out the frameware on the SD card ( of 8 Gb) wit folder Dload on root but when I switch the phone, always the same thing: vibrate, display logo then switch off.
All aother solution require acces to fastboot, but it wont start in my case, other people seem to have same issue but no solution found.
any help (A PC tool maybe to reset the phone...) I searched but i am not an expert couldnt find anything...
so I am counting on your help
Thanks
regards
Hello and thank you for using XDA Assist,
please ask in this section:
Android Q&A, Help & Troubleshooting
The experts there will be able to help you.
Kind regards & good luck
Trafalgar Square
XDA Assist

[Completed] ZTE Blade S6 - phone displays a blank screen after selecting bootloader

Hello everyone,
Many thanks for taking the time to read about my problem. I have a ZTE Blade S6 phone and for some reason, it does not bootup properly. I would like to know if it is possible to use ADB commands to copy files from it? Also, what drivers am I missing?
This is the current situation - When I power it on, the ZTE logo shows up with a white background and it is stuck on that forever, I have let it stay that for more than 8 hours and no luck. Have tried the following already:
1. Volume+ and Power button to load into "recovery" mode and tried to wipe cache partition and reset to factot reset - No change and the problem still remains
2. Tried selecting the "bootloader" option, and the screen goes blank. However, on Windows PC it does detect a usb device however I am not sure if it is supposed to show as "Kedacom USB Device" - "Android Bootloader Interface". I tried another Samsung Android device and it does show up on the devices list under the "Android" section.
Could you please help me to restore the Official ROM so that my phone can be used again? ADB command does not seem to detect the device and so I am not sure what I am doing wrong. It will be really helpful to get some advice. Thanks again.
Hello and thank you for using XDA Assist,
please post your question in our Android Q&A section:
Android Q&A, Help & Troubleshooting
The experts there should be able to help you.
Kind regards & good luck
Trafalgar Square
XDA Assist

Categories

Resources