Database Info

Nexus stuck at update screen (droid with polyhedron)

My Nexus 5 seems to get stuck at the update screen (the standing green android with the spinning polyhedron) after flashing to stock(+unroot) with softbrick/bootloop checked. The flash completed without error. I've left it at this screen for over an hour and not only does it not progress it doesn't even get to the progress bar at the bottom.
This afternoon my (unrooted, bootlocked, stock) N5 turned itself off 3 times while on the charger. Powered back on and then would find it turned off 20 or so minutes later when I checked it again. After the third time it booted to the "Google" screen and would go no further. I tried a hard reset but it gave an error. So I plugged it into my laptop and fired up Wug's NRT, unlocked the bootloader (at which point it got stuck at the same update screen described above for around an hour). I held power till it went off, booted back into bootloader (which showed as unlocked) and performed the flash to stock(+unroot) with softbrick/bootloop checked and ended up at the update animation again. Any thoughts other than RMA?
****Edit: Finally got the phone to boot after fastboot booting twrp. Was able to to wipe the phone (after multiple attemps blocked by can not mount storage/cache/etc/etc errors). Flashed 4.4 and the phone now boots to android BUT radio is non-functional (no signal despite being in my normal coverage area), any attempt to add an APN causes a hard reboot (had to go through all the setup screens again). Additionally, the phone won't turn off, even hard power downs (holding the button for 30 secs) lead to an immediate reboot. Still RMAing but I was able to relock the bootloader.

You really shouldn't RMA a phone after messing it up yourself by using a toolkit when you didn't know what you were doing.
Flash the factory images manually. That should get your phone up and running again.

Chromium_ said:
You really shouldn't RMA a phone after messing it up yourself by using a toolkit when you didn't know what you were doing.
Flash the factory images manually. That should get your phone up and running again.
Click to expand...
Click to collapse
Performed a manual flash with the exact same results. There is apparently something wrong with the hardware (which may explain why it was turning itself off and then wouldn't boot past the google logo.

gallahad2000 said:
Performed a manual flash with the exact same results. There is apparently something wrong with the hardware (which may explain why it was turning itself off and then wouldn't boot past the google logo.
Click to expand...
Click to collapse
Yep, I would agree.

My Inspire 4G (randomly?) stopped successfully booting and cannot access bootloader

I have a rooted and bootloader-unlocked Inspire 4G. A few months ago, I had been using the MoKee 4.2.2 ROM for some time, and one day, my phone's screen simply froze. I thought I shouldn't be worried about it, so I pulled the battery off, slapped it back in and tried turning on the phone again. It never got past the MoKee loading screen. I tried charging it, leaving it to boot for hours but nothing.
Next, I tried rebooting into CWMrecovery to try different stable backups I had from some time before that happened. The backups restored successfully, but again, the phone stayed stuck in the loading screen. I tried the same with 4EXT Touch Recovery and wiping all the data before the backup, but still nothing worked.
Since I was too busy at the time to install a new ROM and flash a new boot image, I decided to put the phone away and use my backup Galaxy Ace. Today, a few months after that happened, I tried to boot the phone into bootloader and I can't even achieve that. Holding the volume down rocket and power buttons, the phone still boots normally and stays stuck on the loading screen.
What weirds me out the most is that this was all random--I did not drop the phone or did things to it that could break it.
I feel if I could get into recovery I'd be able to do something else about it.
Any ideas?

Me too
Weird, mine just did the same thing today. Crashed, had to pull battery, now stuck at Mokee. Tried clearing DC, cache, factory reset. No luck.

Stuck at boot screen even after restore with tot method...

Hello Everyone,
I have been trying to help my friend with his soft-bricked G3. He wasn't rooted and had never even played with flashing anything, it just stopped booting one day and would display the "LG Life's Good" boot screen for a few seconds before going black and then just repeating this endlessly. I was able to get into recovery and download mode so I used the tot method to flash back to stock after a hard reset just produced the same results.
When I flashed the stock firmware, everything appeared to work fine, it went through the MiniOS bootup and everything, said success, gave me the hard reset status screen so when it finished I pulled the battery as instructed and rebooted but the phone still has the same issue. I have tried to run factory reset through recovery now that I flashed the new firmware and it still does the same thing, just hangs at the boot screen for a few seconds before going black and then trying again, endlessly.
Has anyone encountered this before? Is it bricked?
Thanks.

The_mamba said:
Hello Everyone,
I have been trying to help my friend with his soft-bricked G3. He wasn't rooted and had never even played with flashing anything, it just stopped booting one day and would display the "LG Life's Good" boot screen for a few seconds before going black and then just repeating this endlessly. I was able to get into recovery and download mode so I used the tot method to flash back to stock after a hard reset just produced the same results.
When I flashed the stock firmware, everything appeared to work fine, it went through the MiniOS bootup and everything, said success, gave me the hard reset status screen so when it finished I pulled the battery as instructed and rebooted but the phone still has the same issue. I have tried to run factory reset through recovery now that I flashed the new firmware and it still does the same thing, just hangs at the boot screen for a few seconds before going black and then trying again, endlessly.
Has anyone encountered this before? Is it bricked?
Thanks.
Click to expand...
Click to collapse
Pretty common prob plug it in to the wall charge see if it boots sometimes it still wont but most of the time it will the battery quality on the g3 is crap they last at most a year with a few exceptions i would first order a battery.

[Q] Google logo bootloop after flashing TWRP

Last night I tried to flash TWRP just because I wanted to go to a custom ROM- alas, the phone now will not go past the google logo. It usually hangs there for 10-ish seconds and then reboots. Occasionally hangs there indefinitely. It's not a power button issue- the button worked just fine before flashing and I've confirmed it still works normally with a multimeter.
I tried to reflash stock using the Google images and "flashall.bat", which says it succeeded- but the phone still loops. I can get into fastboot, but I get the bootloop even in recovery. Running the similar script through Nexus Root Toolkit always fails on flashing the system partition- usually a buffer error due to a sparse header. Can't even seem to get it to do the "fastboot boot TWRP.img" or whatnot. I've flashed KitKat, Lollipop, and MM stock roms to no avail- they all say they succeed, then continue to bootloop.
I've tried just about everything I've seen on here- but not being able to get into recovery hampers efforts like repairing the persist partition.
Help?

When you boot into recovery, the phone reboots itself? If it does, it could be a sign of a failing power button.
When flashing a stock ROM, are you flashing userdata.img and then performing a factory reset/wipe before booting the phone with a stock ROM for the first time?

When I can get into recovery (without a restart), the phone is totally fine.
I think part of the issue is that the battery ran down while I was trying to do the repair- hence it trying to restart and failing. Power button still seems fine (again, confirmed with a multimeter). I left it plugged in to my iPad charger (since that's a 2A charger) overnight and it was still blinking red in the morning. I moved it upstairs and now I can't even make it that far.
Perhaps the battery was just shot by the time I got the "repair" done, hence the boot loops. Is there any way to revive it shy of cutting open the battery + charging manually (with a bench supply) or just replacing the battery altogether? I may try doing a motherboard swap with my working Nexus 5 just to see if it is in fact the battery.

When the phone is powered off and connected to a power source, do you ever see a flashing red LED? You flashed the correct twrp for the hammerhead?
I would try a new battery because it seems like everything is working.

Phone won't complete after stock flash

My father-in-law's S6 was rebooting right after the menu screen came up. After trying numerous things which wouldn't work (still had varying boot loops) like getting into the recovery mode and doing a factory wipe, I decided to use Odin and flash the base stock Android nougat on this (it had the one verizon security patch after that, so should be no issue doing this).
That went okay and it rebooted and got all the way to "Android is starting" which you see after a firmware upgrade. But I didn't realize the battery had run down through all this so it died at this stage. So it was taking a charge now, so let it charge overnight and give it another run.
Got up today, tried to start it...back to the boot loop. So I figured I'd flash stock again with Odin (can always get back to that mode).
It completes successfully and then after the reboot at about 32% jumps to "erasing" and then the boot loop again.
Got into recovery mode once and wiped cache (pointless at this point, but whatever) and did factory reset there, then boot to bootloader. Got all the way to the verizon screen...and then boot loop again.
Is this phone just done? The only thing I can consistently get to is Odin mode. I tried the stock reflash a couple more times and keep ending up in a boot loop and it doesn't even get past the "custom" screen now. And I can't even actually get it to shutdown for that matter. I can get to the battery pull mode but if I try to power off from there, I just get the black screen with the blue light.
And, to make matters even worse, now on restart, it brings up the blue system update screen for a second, then jumps over to the no command screen, sits there for a second, then reboots again. I think I've somehow managed to even blow the recovery menu but this has all been stock and never had any custom firmware or root.
Any help/suggestions would be greatly appreciated!