Disclaimer: I received this product for free in exchange for an unbiased review.
I received a Diztronic Voyeur Series case for the Nexus 6P and after using it for approximately two weeks, I wanted to share my thoughts.
PACKAGING:
The voyeur case arrived in a brown Diztronic box. Not too much to be impressed with, but the box held the product nicely. Inside the box, Diztronic bubble wrapped their case for extra protection during shipping. Once I opened the box and unwrapped the bubble wrap, there were a total of 3 protective films over my case. One film coated the clear plastic on the inside and was a bit of a hassle to get off. At first, I thought there was just one film on the outside which removed very easily. I used the case for a week, but I received several scratches all over the back of the clear backing. I reached out to support and they immediately responded to my photos of the scratches with a simple solution: I still had another clear film on the outside of the clear backing. I felt like a complete idiot, and once I removed this THIRD protective film, all scratches disappeared. The case felt better after all protective films were removed. In all, packaging was great, but could have been better with instructions since there were so many protective films on the case that others like myself may not expect.
FIT:
My 6P slid right inside the case. The case fits perfectly. Not too tight and not loose at all. The case feels solid on the phone and great in hand. All cut outs are awesome. The headphone and USB-C cutouts are both square, and I have not had an issue with either. The volume buttons are covered together and marked with a plus and minus sign. The power button is also covered but has the standard power symbol on the button. I have had ZERO issues with the buttons. The buttons are great and clicky and after using other brands of cases, I prefer this Diztronic design. Down from the side buttons, there is a Diztronic brand imprint. It is not overly visible nor does it interfere with the nice design of the case. The front of the case does have a lip which is a necessity for me. On the back, the camera cutout is open for the lens, flash, autofocus, etc. Nothing crazy in terms of design here, just the usual oval cutout design. The fingerprint scanner cutout is perfect in my opinion and not too large like other companies. In my experience using the case, I did not have an issue finding the fingerprint cutout. The clear back is not as slippery as the phone naked and the case remains ultra slim. On the bottom of the back of the case, there are little legs which really makes this case stand out. These little legs on the back of the case help to keep your phone level when laying on its back. I am sure this also helps prevent scratching, but after using this case now, I still have no scratches or marks whatsoever which is amazing for a clear backed case. I have used other brands where the clear became foggy/scratched/or had other imperfections, but this is not the case with the new Voyeur series.
PROS:
- INCREDIBLE design for the price
- Completely scratch-free after using case for 2 weeks
- tiny legs on back of case keep phone flat
- extra slim case that offers great protection
- clicky and tactile button covers
- all cutouts aligned correctly
- BEAUTIFUL product!
CONS:
- You might have several protective films over the clear plastic back. If you have any scratches or marks, reach out to Diztronic support and they can help you!
FINAL THOUGHTS:
So should you spend your hard earned $11.95 on this case? ABSOLUTELY. On a scale of 1-10, I award this case with a SOLID 10. After I used a RhinoShield bumper for 2 weeks, and then a Poetic Affinity case for a month, this case is everything! The plastic will not scratch, and I feel like my phone is protected. I do not have to worry about any marks to my device and while protecting the device, I can show off my favorite 6P color: gold! If you prefer slim but protective cases, please give the Diztronic Voyeur Series a try. They have amazing customer support and their products focus on consumer feedback. :good:
http://www.amazon.com/Huawei-Nexus-Diztronic-Voyeur-Crystal/dp/B0198W4B3M/ref=sr_1_1?ie=UTF8&qid=1460909475&sr=8-1&keywords=diztronic+voyeur+series+nexus+6p
Horrible back design.
It is a great case. I have it too. But the only issue is the device has play inside the case. Look at the fingerprint sensor and the hole cut out for the fingerprint sensor. It is always off,....never center like the spigen or the other distronic case.
Sent from my Nexus 6P using XDA-Developers mobile app
puertorecon said:
It is a great case. I have it too. But the only issue is the device has play inside the case. Look at the fingerprint sensor and the hole cut out for the fingerprint sensor. It is always off,....never center like the spigen or the other distronic case.
Sent from my Nexus 6P using XDA-Developers mobile app
Click to expand...
Click to collapse
My 6P does not have any play inside of the case at all. It fits like a glove. On the Poetic Affinity, my phone constantly shifted inside the case... I am not sure if you just got a lemon or if I got lucky lol. As far as the fingerprint cutout, its exactly centered as it should be. I just received Diztronic's latest revision though last month so I am not sure if that has anything to do with the fingerprint sensor cutout being more precise. I seriously cannot find anything off with my case.
I have both versions of the Affinity case and neither had any give inside. I do agree w/ joooe that this case's design isn't my cup of tea but I do love Diztronic cases. Used them for other devices. I've always loved the material Diztronic uses on their TPU cases. One thing I do not like about this case is the "legs" on the bottom. I've never liked those things on any smart device case. I guess you can consider that the Affinity cases have "legs" on them as well but the design makes it less obtrusive and part of the overall design instead of just jutting out on the corners.
gqukyo said:
I have both versions of the Affinity case and neither had any give inside. I do agree w/ joooe that this case's design isn't my cup of tea but I do love Diztronic cases. Used them for other devices. I've always loved the material Diztronic uses on their TPU cases. One thing I do not like about this case is the "legs" on the bottom. I've never liked those things on any smart device case. I guess you can consider that the Affinity cases have "legs" on them as well but the design makes it less obtrusive and part of the overall design instead of just jutting out on the corners.
Click to expand...
Click to collapse
oohh the legs are one of my favorite features of this Diztronic case. I think the design of this case is minimal and I really like the overall design. The tpu material feels great in hand.
On the subject of the Poetic case, I was completely disappointed. I even reached out to their support and they refused to even acknowledge that my case was no good. The case did not fit my 6P snug at all. I had probably 1-2 mm of extra space inside the case from the top of my 6p to the inside of the Affinity case. I could literally rock my phone back and forth inside the case. It was ridiculous. That was the last straw for me with Poetic. The first issue I had with the Affinity was that they mailed me the old design with all the logos all over it. I had to ask them to send me the revised model without the logos. Of course they did that, but would not replace the faulty case that now sits in my closet since I received this Voyeur case.
Yeah, I had the original design and when I learned of the new one, just emailed them and they sent me new one for free. I was very happy with the revised version and currently using it now. All of us just get lemons sometimes.
Jhvoorhies said:
My 6P does not have any play inside of the case at all. It fits like a glove. On the Poetic Affinity, my phone constantly shifted inside the case... I am not sure if you just got a lemon or if I got lucky lol. As far as the fingerprint cutout, its exactly centered as it should be. I just received Diztronic's latest revision though last month so I am not sure if that has anything to do with the fingerprint sensor cutout being more precise. I seriously cannot find anything off with my case.
Click to expand...
Click to collapse
I am not try to start anything. But look at the fingerprint sensor and cut out in your first pic. The look at you second pic. It has moved to another position. It does move inside the case. I have this case.
And it moves inside the case. The grey and the blue you are dead on.
Sent from my Nexus 6P using XDA-Developers mobile app
puertorecon said:
I am not try to start anything. But look at the fingerprint sensor and cut out in your first pic. The look at you second pic. It has moved to another position. It does move inside the case. I have this case. View attachment 3726562
Click to expand...
Click to collapse
Sent from my Nexus 6P using Tapatalk
Maybe I a bad case. But, if you tap you phone to the side while case is on it, will it move? Mine does.
Sent from my Nexus 6P using XDA-Developers mobile app
My fingerprint cutout looks off in this pic, but I can assure anyone wondering... It's perfectly centered.
Sent from my Nexus 6P using Tapatalk
I ditched Spigen's Ultra Hybrid for this, haven't been disappointed yet. I even removed my dbrand (carbon) skin and went naked, but I'm thinking to slap a leather/matte skin, loving the case.
i don't know why, but my back came scratched out of the box. I haven't scratched it myself, but the scratch it came with has bugged me a bit since i got it. aside from that, i didn't like the plastic back at first as it feels slippery if your hands ever sweat. but i got used to it, and i love this case. and i own a lot of cases LOL.
rhinoshield
verus
all google cases
and many more amazon cases, until i got this one. the diztronic case was my last, and favorite case of all.
Someone mentioned that there's multiple protectors on the clear area so see if you need to peel those layers off
Related
Okay guys I'll start this off by saying that I am not impressed with the current case selection for this phone. Now, let's begin with the review.
1.The first case I'll start with will be my Rearth Ringke Fusion hybrid case. I loved this case to death when I first received it on the same day I got my phone, and it has been my favorite case since I got my new one (more on that in a minute ). It feels great in the hand, as it's completely ergonomically similar to the phone itself, and the button feedback is a dream. The clear plastic back has much to be desired, however. The plastic smudges, smears and attracts fingerprints like no other. It also is slippery. VERY slippery. Keep in mind that I have hands that are almost always moist in some form or fashion, so the back plastic of this thing felt like butter. All in all, a very good case and I highly recommend it, except for those with moist hands!
2. Next is my replica Google official bumper. (Replica is perfectly identical to the actual one.) I bought this bumper in conjunction with a carbon fiber dbrand skin, (I still have that on, props to dbrand for making the best skin in the world!) and I was honestly a little disappointed. The stippled texture that bands the sides and sandwiches the fake aluminum plastic piece together feels amazing in the hand. My moist sweaty hands had no problems gripping this bumper, except for the fake aluminum plastic piece that I just mentioned. It's not totally matte, but it's not totally glossy either, it's an odd mixture that feels great to touch, but for me it was a tad slick. It wasn't nearly as bad as the Ringke Fusion case but it was enough for me to take it off sometimes. The buttons clicked with pride and although it did add quite a bit of width to the phone, it had an awesome fitment, no flex or peeling of materials found on this bumper! I would still definitely recommend this case despite the negatives.
3. The other day, (Friday), I received my Mercury TPU case (black), and boy let me tell you something. My hands promptly said NOPE right when I got it on the phone. For some reason I must've been on some crazy drug and bought the thing thinking that it would be some grippy, sticky rubber case. WRONG. All I'm going to say on this one is, misaligned speaker and microphone cutouts, super slippery and the finish on the face of the skin where you see it almost all the time has an orange peel look to it, almost like a ZAGG screen protector. However, the sparkles on the back really made me want to play some funky music!
4. Today, (about 15 minutes before I wrote this), I got my Ringke Slim case in the mail. One complaint: I got an older version, the one with the loose volume slot, but it's not a big deal as I can't really hear any creaking. Other than that minor mishap, for the fifteen minutes I've been using this thin case, and it is EXTREMELY thin, I'm proud to say that this is my favorite case thus far. The matte finish has a soft-touch coating on it that feels like heaven, the button cutouts and speaker, mic cutouts are spot on and without flaws. Most people don't notice it, but this case actually has four little feet on the screen side on the case that allows you to set the phone on it's face and not get the screen scratched. Nice!
The complete lack of top coverage is nice FOR ME because I can finally put my ATH-M50's in my phone without having to remove the case! :good:
Keep in mind that the Slim is a totally different case than the other three, most similar to the bumper however.
Here are links to each of the cases on their respective websites, (if such site exists).
1. http://www.rearthusa.com/google-nexus-4-hybrid-fusion-case
2. https://play.google.com/store/devices/details/Nexus_4_Bumper_Black?id=nexus_4_bumper_black&feature=accessories#?t=W251bGwsMSwyLDExMSwiZGV2aWNlLW5leHVzXzRfYnVtcGVyX2JsYWNrIl0.
3. http://www.amazon.com/Mercury-Flexible-Google-Nexus-Black/dp/B00AOW8ICQ/ref=sr_1_1?ie=UTF8&qid=1369864701&sr=8-1&keywords=nexus+4+mercury
4. http://www.rearthusa.com/google-nexus-4-ringke-slim-case
I've been in search of a case i'll actually like. Been thinking about getting the ringke slim but i'm just afraid of the lack of protection. I've never dropped my n4 but for that one time that i do, it'll be great to have the protection.
I also have the ringke fusion, it's a nice case but the back gets dirty and gross pretty easy. The official bumper just feels bulky and my headphones don't fit.
got my Ringke Slim 4 days after i got my n4, had the official bumper ordered with the phone but it just made it too bulky for my taste.
Had my ringke the rest of the time and never looked back. it IS the best case i've ever used on a phone. this comiing from a person who doesnt like to put cases on phone but with this phone just wanted that extra protection. its very slim and doesnt add any bulk what so ever. going on 6 months with the slim and still rocking it.
I own three of the four cases that op reviewed. Exactly my same thoughts for the most part. Pretty well done review. Kudos. Although I would be semi cautious about the official bumper as its known to cracking on the bottom of the usb port. The slim is a really nice case but if covering the back isn't your thing then it isn't the case for you.
Sent from my Nexus 4 using Tapatalk 4 Beta
Tempist305 said:
3. The other day, (Friday), I received my Mercury TPU case (black), and boy let me tell you something. My hands promptly said NOPE right when I got it on the phone. For some reason I must've been on some crazy drug and bought the thing thinking that it would be some grippy, sticky rubber case. WRONG. All I'm going to say on this one is, misaligned speaker and microphone cutouts, super slippery and the finish on the face of the skin where you see it almost all the time has an orange peel look to it, almost like a ZAGG screen protector. However, the sparkles on the back really made me want to play some funky music!
Click to expand...
Click to collapse
I would be tempted to request another one, mine is an absolute perfect fit with all the cut outs being in the correct places. Regarding its slippyness after a couple of days use it starts to get more grippy.
Out of the 4 cases i have bought for the Nexus 4 this is the only one i have kept lol
The Rinke Slim i had was the worst of the lot, made my phone really slippy and offered zero protection.
Honestly I'm surprised there aren't more people using/reviewing the Acase Superleggera pro. I've tried a hatful of cases and by far the Acase is perfect for me. The only complaint that people have for it is that it's bulky, but for me that's a pro. I want my pocket to feel slightly heavy (like 40 grams more than the phone?) to know that my phone is still there, and then I can avoid those mini heart attacks that you get when you think you've lost your phone.
The protection is the best out there,it looks great, isn't slippery at all, feels premium in your hand, button feedback is excellent, not too much of a fingerprint magnet and doesn't interfere with my screen protector.
The only downside is that the back isn't transparent but you get over that initial fascination of showing off the back soon anyway.
I like the Acase pretty well. The amount of lint that it picks up bothers me more than anything. I think it would be nice if the inner case was a light - medium grey, so the lint is less apparent. I have the Mercury, Superleggera, Ringke Slim, and Poetic bumper. I change them out all of the time because I'm not completely satisfied with any of them.
Sent from my Nexus 4
since you have protection on the back and you are using the Rinke slim which is made to fit precisely, do you feel like it is adding too much pressure to the phone? I have a feeling that may have happened to mine and when i squeeze the top part of my phone it creaks. I'm not sure if this was the cause, but if yours has zero creaks then I will assume it is safe to have the skin on the back along with the case.
Mohit12 said:
Honestly I'm surprised there aren't more people using/reviewing the Acase Superleggera pro. I've tried a hatful of cases and by far the Acase is perfect for me. The only complaint that people have for it is that it's bulky, but for me that's a pro. I want my pocket to feel slightly heavy (like 40 grams more than the phone?) to know that my phone is still there, and then I can avoid those mini heart attacks that you get when you think you've lost your phone.
The protection is the best out there,it looks great, isn't slippery at all, feels premium in your hand, button feedback is excellent, not too much of a fingerprint magnet and doesn't interfere with my screen protector.
The only downside is that the back isn't transparent but you get over that initial fascination of showing off the back soon anyway.
Click to expand...
Click to collapse
I ordered one of these yesterday after reading many reviews. Looks like the best bang for the buck and some decent drop protection, which many of the other cases don't have. I also like the fact that the measurements have it only slightly more bulky than the Diztronics case I have, so it will fit in my leather holster perfectly.
Bumper
Tempist305 said:
Okay guys I'll start this off by saying that I am not impressed with the current case selection for this phone. Now, let's begin with the review.
1.The first case I'll start with will be my Rearth Ringke Fusion hybrid case. I loved this case to death when I first received it on the same day I got my phone, and it has been my favorite case since I got my new one (more on that in a minute ). It feels great in the hand, as it's completely ergonomically similar to the phone itself, and the button feedback is a dream. The clear plastic back has much to be desired, however. The plastic smudges, smears and attracts fingerprints like no other. It also is slippery. VERY slippery. Keep in mind that I have hands that are almost always moist in some form or fashion, so the back plastic of this thing felt like butter. All in all, a very good case and I highly recommend it, except for those with moist hands!
2. Next is my replica Google official bumper. (Replica is perfectly identical to the actual one.) I bought this bumper in conjunction with a carbon fiber dbrand skin, (I still have that on, props to dbrand for making the best skin in the world!) and I was honestly a little disappointed. The stippled texture that bands the sides and sandwiches the fake aluminum plastic piece together feels amazing in the hand. My moist sweaty hands had no problems gripping this bumper, except for the fake aluminum plastic piece that I just mentioned. It's not totally matte, but it's not totally glossy either, it's an odd mixture that feels great to touch, but for me it was a tad slick. It wasn't nearly as bad as the Ringke Fusion case but it was enough for me to take it off sometimes. The buttons clicked with pride and although it did add quite a bit of width to the phone, it had an awesome fitment, no flex or peeling of materials found on this bumper! I would still definitely recommend this case despite the negatives.
3. The other day, (Friday), I received my Mercury TPU case (black), and boy let me tell you something. My hands promptly said NOPE right when I got it on the phone. For some reason I must've been on some crazy drug and bought the thing thinking that it would be some grippy, sticky rubber case. WRONG. All I'm going to say on this one is, misaligned speaker and microphone cutouts, super slippery and the finish on the face of the skin where you see it almost all the time has an orange peel look to it, almost like a ZAGG screen protector. However, the sparkles on the back really made me want to play some funky music!
4. Today, (about 15 minutes before I wrote this), I got my Ringke Slim case in the mail. One complaint: I got an older version, the one with the loose volume slot, but it's not a big deal as I can't really hear any creaking. Other than that minor mishap, for the fifteen minutes I've been using this thin case, and it is EXTREMELY thin, I'm proud to say that this is my favorite case thus far. The matte finish has a soft-touch coating on it that feels like heaven, the button cutouts and speaker, mic cutouts are spot on and without flaws. Most people don't notice it, but this case actually has four little feet on the screen side on the case that allows you to set the phone on it's face and not get the screen scratched. Nice!
The complete lack of top coverage is nice FOR ME because I can finally put my ATH-M50's in my phone without having to remove the case! :good:
Keep in mind that the Slim is a totally different case than the other three, most similar to the bumper however.
Here are links to each of the cases on their respective websites, (if such site exists).
1. http://www.rearthusa.com/google-nexus-4-hybrid-fusion-case
2. https://play.google.com/store/devices/details/Nexus_4_Bumper_Black?id=nexus_4_bumper_black&feature=accessories#?t=W251bGwsMSwyLDExMSwiZGV2aWNlLW5leHVzXzRfYnVtcGVyX2JsYWNrIl0.
3. http://www.amazon.com/Mercury-Flexible-Google-Nexus-Black/dp/B00AOW8ICQ/ref=sr_1_1?ie=UTF8&qid=1369864701&sr=8-1&keywords=nexus+4+mercury
4. http://www.rearthusa.com/google-nexus-4-ringke-slim-case
Click to expand...
Click to collapse
I bought a Minisuit (transparent) for protection when going camping, beach, or a very wet day. And I also bought the Poetic bumper. The minisuit is great, the only problem is that the power button sometimes is hard to press. With the Poetic I had problems with the first unit they send me, it broke in a week. I called poetic and they replaced the bumper with (2) new ones, they told me that they had problems with the first batch they ordered, but they assured me that the new one was perfect, today it's been 4 months since I'm using the Poetic and I can say is been great, no pealing, no plastic coming off, and I still have a replacement new one just in case.
I got a white color of ringke slim case. the material is too slippery. never like it. plus the corners feel really sharp by touching it it may scratch my N4.
I ordered Incipio feather case. It may not be slim as ringke but it feels really good.
Hey guys. I just decided to try Nexus 6P. Looking for some great cases to protect it! But also I don't wanna spoil the original look of it since the design's so unique and beautiful!Just got two clear cases for my former Nexus 6 from AMZ and looks wonderful, yet the clear case get darken yellowed after few weeks using, so just share your N6P case experience here and enjoy!
Long response incoming:
I initially bought a official microfibre Adopted case (in carbon) from Google along with my N6P (aluminium). I paid full price for it, but I thought it was worth the premium for an official case and the design was cool and unique. Massively underwhelmed when I received it, because it's nothing more than a generic TPU case with a thin "sticker" of microfibre on the back, which I sensed would be prone to staining and, over time, peeling. The fit was also really tight and button presses weren't that responsive. I decided in the end that the Nexus branding wasn't worth the premium, so I returned it.
I then ordered a charcoal Diztronic case. I've had good experiences with Diztronic in the past, having used their case on my Galaxy Nexus as a daily driver. It was cheaper than the Spigen Rugged Armor and I appreciated the minimalist aesthetic, not being a fan of the faux carbon fibre pattern on the Spigen. The fit and finish was great, and the buttons were clicky and responsive. My only minor niggle was the cutout for the camera sensor wasn't completely accurate, as it cut off part of the circle surrounding the sensor (100% an aesthetic oversight with no impact on function).
I then bought a Speck Candyshell Grip (in white) during the Black Friday sale, when it was 50% off. Definitely my favourite case of the three I've tested so far. It provides the most protection (being a dual-layer silicone and polycarbonate hybrid), looks striking, and, as the name implies, provides a ton of grip.
I've had a Speck Candyshell on my iPod touch and over 4 years later, it's still kept my iPod in perfect condition. The case itself is scratched up and turned a bit off-white, but I haven't exactly been gentle with it (having taken it traveling and camping) so I'm confident in its protective capabilities.
I'll likely be rocking the Speck case as my daily driver for the time being, and I'll only swap back to the Diztronic when I want a more toned-down look and slimmer profile (maybe if I'm at a fancy event wearing slacks).
Finally, I also pre-ordered a white Crash Guard + Project S from Evolutive Labs when they offered 25% off the first 50 pre-orders. IMO this would be the solution to preserving the Nexus's original design and aesthetics, while still providing a lot of protection (if the demo videos are any indication). I have no idea what Project S is, though (hopefully some kind of transparent skin, though they said it wasn't going to be made of the same material as the Rhino Shield).
I have a tempered glass screen protector from intelliARMOR protecting the front (second generation/first revision, the model prior to production of the two distinct "case-friendly" and "edge to edge" versions). It's been fine with both the Diztronic and Speck cases, though I'm curious as to whether the edge-to-edge versions might also be compatible with the Speck and Crash Guard, as there's just 1 mm between the edges of the cases and screen protector, where I find dust and grease can get trapped in between.
If you're looking for clear cases, there're Spigen's Ultra Hybrid and Neo Hybrid EX cases. The Ultra Hybrid is a single-layer case with a clear polycarbonate back framed by TPU along the edges. I wouldn't recommend it personally because I've heard that clear TPU will stain over time (as likely what happened to your original case), and the visor is completely exposed and thus prone to scratches.
The Neo Hybrid EX consists of 2 pieces: a clear TPU shell and a coloured polycarbonate bumper (essentially, the reverse of the Ultra Hybrid). It looks to be the best clear case I've seen in terms of protection (as the visor is actually covered), but I don't know how the clear TPU will fare over time, whether it will also be prone to staining. I'd wait on reviews for this case before ordering, and for it to be listed on Spigen's Amazon store, which will likely be cheaper than buying it off their main website or eBay store.
To be honest it's the first device that I don't have a case for it although I have a tampered glass and a pouch. But I'm waiting for some skins from dbrand and a wooden skin from toastmade.
Tapatalked with my Nexus 6P
I got the carbon cloth backed Nexus 6P case originally and I really like the look and feel of it, but it's not the most protective. The only issue I've had with it is taking screenshots (the case presses buttons you don't mean to) and it wouldn't work with a tempered glass screen protector (it peels it up).
On the black Friday I got the Speck CandyShell in black/slate and I'm digging it. It's more protective and it makes the button presses a little harder, which I like. I would think it'd work with a glass screen protector as the bezels don't intrude onto the glass very much.
I use a Supcase Unicorn Beetle Hybrid as my standard case. I usually slide it in my pants or jacket pocket. I do wish there was a belt clip for the Beetle Hybrid, but to get a belt clip case combo you typically are into something much thicker and substantial that is, for me, unnecessary. When I'm wearing a suit, I use it bare and carry it in a Story Leather belt clip holster made for the iPhone 6s Plus. The phone has a Skinomi Tech Glass protector on it.
My experience mirrors LuckyDragan a little bit.
My first case was the microfiber case from the Google store. While it looked nice and the in hand feel was decent, I felt it cost way too much for what it was. I ended up returning it because when I pressed the edge of the case by the buttons it would change the volume. Not cool for a $35 case.
Next case is the reg. Adopted case. It's not bad. I really like the textured sides. It's also fairly narrow. Thing is, I paid $10 for it, at the reg. price of $20, I'm not sure if it's worth it. By the pics I've seen, I think it looks better than the Diztronic, especially the fingerprint cut out.
3rd case is the Spigen Rugged Armor. Except for the camera cut out (I don't like how it doesn't leave room for the blueish oval), I think it looks the best of all the cases I've tried so far. My nags are that It's all little wide and slippery. At $13.00?, it's a good buy.
4th case is the Speck Grip. My favorite so far. It's not as thin as the other cases but not bulky. The grip is awesome, no problem using the phone with one hand. At first glance, I didn't think it was the best looking case, but it's starting to grow on me. The protection and how it makes the phone so much easier to handle makes it a winner. @ $20 I paid during the Google store's sale, I think it's worth it. @ the reg. price of $40, idk.
If haven't yet, check out Pilz review thread, so much good info.
White Speck case as my daily driver.
I have tried the Diztronic one, while it does provide protection, did not like how loose the edges felt, definitely not as snug and stiff as my Diztronic Ultra that is on my GS6. It easily bent out edges for my taste, and thought of getting some debris that could scratch up the phone was bugging me somewhat. If you need a very minimalist, fingerprint resistant, and decent lip for screen protection, that is the case to have.
Also have the Supcase Unicorn Hybrid Ultra. great case, snug and firmer edges than the Diztronic one, but damn, is that case slippery. I have a habit of placing the phone on my car seat, and that thing just slides around like a hockey puck on ice when placed on its back. Placing it face down did help... still preferred it over the Diztronic.
But snagged the White Speck Candy Shell Grip case at 50% off, love it. Excellent grip, very tight and solid felling edges, does not slide when placed on a my car seat. Wished they offered a matt finish white version of this, since I am not a fan of shiny cases, but the black rubber lines offset it enough to be likable for me. Sporting the Orzly TGSP,with that case there is a minimal space between the glass and the edges of the case, nearly perfect sealed fit. Hoping the intelliglass ones are a bit more of an coverage so that it could have a near gapless glass to case seal, still waiting on receiving mine...
Currently have the Tudia case which is brill, but also got the Spigen rugged case coming.
Official microfiber case in carbon. No screenshot issues or button issues in general. I love the soft fabric feel. Feels more "welcoming" than the cold, hard plastic/TPU of other cases I've used. Regarding durability, I'm a little concerned, but only time will tell how the microfiber will hold up.
Smoked Ringke fusion is my case of choice, at least for now. I also have the Orzly flexicase and Spigen rugged armor. Don't really care for either of those.
Anyone want to trade a case for the spigen rugged armor? mint condition and hasn't been used other than trying it on once.
PuffinNugz said:
Smoked Ringke fusion is my case of choice, at least for now.
Click to expand...
Click to collapse
I'm also using this case and think it's a good balance of fitting, protection, minimal bulk, etc all for a low price. I bought it off Amazon for $11 but unfortunately it's been outta stock for the past month or so. I wished they had a clear case instead of smoke coloring though.
I use spigen rugged armor, it's a good case that offers high protection to your phone..
i intend to order the verus high pro shield case though, just want to wait for some time until they fully supply the updated case.. the first batches had a defect about the charging port..
InfestedAdam said:
I'm also using this case and think it's a good balance of fitting, protection, minimal bulk, etc all for a low price. I bought it off Amazon for $11 but unfortunately it's been outta stock for the past month or so. I wished they had a clear case instead of smoke coloring though.
Click to expand...
Click to collapse
They've got both clear and smoked in stock through ebay. http://www.ebay.com/itm/Ringke-FUSI...hash=item3d076ed1ad:m:mNMnxjoDe6mqlXAgy0u2D6g
PuffinNugz said:
They've got both clear and smoked in stock through ebay. http://www.ebay.com/itm/Ringke-FUSI...hash=item3d076ed1ad:m:mNMnxjoDe6mqlXAgy0u2D6g
Click to expand...
Click to collapse
Thank you for the notice. Strange. Is Ringke the actual seller? I wonder why they stopped selling via Amazon.
InfestedAdam said:
Thank you for the notice. Strange. Is Ringke the actual seller? I wonder why they stopped selling via Amazon.
Click to expand...
Click to collapse
Yeah, not sure about amazon, but I bought mine from that ebay link. Pretty sure they are the actual sellers.
The Spigen rugged arrived today and it is SOOOO much nicer than the Tudia one. Better fit and feels nicer and more secure.
Sent from my Nexus 6P using Tapatalk
I've had a few cases so far.
SR Tech - Typical TPU case. Decent protection. Cutouts were slightly off. Total fingerprint/oil magnet. Got real slippery after a week or so of use and required a wipe down. Did not interfere with my Pleson TGSP.
Spigen Rugged Armor - Soft touch finish felt really good in hand. Very good protection at the sacrifice of some added bulk. Cutouts were precise and buttons had a nice tactile feel. Soft touch got some smudges on it occasionally but not nearly as bad as the SR case. Did not interfere with my Pleson TGSP but it was really close.
Spigen Thin Fit - Very interesting finish on this case. Kinda felt like the back of the Nexus 6. Fingerprints weren't really a problem but oil/smudging was. Case snapped on snugly and provided good protection for the covered areas. Top and bottom of the phone were exposed. Did not interfere with my Pleson TGSP.
Nillkin Nature - This is my daily driver. Pretty much the same as the SR Tech, only about half the thickness. Cutouts are more precise and there is a cover for the Type C port, which I really like. This is literally the thinnest case I've ever used and it really helps make the already large 6P more manageable in the hand. I wish it came in a matte finish so oil/fingerprints weren't so much of an issue, but other than that I'm happy.
Adopted for now until bumpers start arriving and be reviewed.
Ringke smoke and Google Microfiber. Like both and switch weekely
Sent from my Nexus 6P using Tapatalk
I switch from the official google carbon case and spigen ultra hybrid. They are great cases but the buttons on both aren't the best. I also have speck case but I use it for when I go to the gym. Diztronic case is nice but phone feels loose inside and verus case.. Its whatever.
Sent from my Nexus 6 using Tapatalk
So I just received the Poetic Affinity clear case and I'm liking it!
album of pictures: http://imgur.com/a/E0vrg
It's clear, with a black bumper around it so that it sits on this small bumper rather than the clear portion. It's a very nice, tight fitting case. Phone feels nice and snug inside, which is a complaint I had about the Diztronic TPU in that the sides were loose and would bulge out, which was quite annoying.
this case fits nice and tight, and has a good grip. The sides have these bumps which are the same hard plastic that the case is made of, but they provide some great grip. def don't see myself dropping this from holding it on the sides, which I like.
the case itself seems to be of sturdy construction. it's a harder type fully clear mold, with a softer TPU type little exo skeleton type bumper that makes putting it down on a surface nice and soft. the lining around the screen is black and also a soft tpu like material, so if you put your phone face down on the table, again, it'll go down softly rather than hard like a fully hard case.
has all the standard ports, and they are all precisely cut: headphone jack, charge port, and the oval shape around the camera and motorola dimple are perfectly cut and look nice and even.
best thing is the case is super clear, so if you've got a nice leather or wood back, it'll shine right through. my moto x was the standard black back, but it still looks cool through this case.
overall, totally worth the money for a case that offers some decent protection, looks and feels good, and overall seems like it'll last with the phone!
link to the amazon site for it: http://www.amazon.com/Affinity-Prot...900484&sr=8-2&keywords=poetic+affinity+moto+x
The very same case but with clear bumpers if you want an overall clear look:
Looks great - thanks for the pictures! At $15 it certainly seems like a great deal! My Cruzerlite case seems shabby in front of it. I think I am going to have to ask someone to get it for me from the States.
What's the lip like? Sufficient in case of a face down drop? Is the corner protection better than the average case, like it seems in the pictures? Also, do you think that the clear part would get scuffed/ scratched over time and not look so great?
the lip isn't huge, but it's big enough to keep the protruding speakers off the surface it seems. corner protection looks good, and there's cushioning on the inside on the corners as well. the clear surface looks good, and isn't holding fingerprints too bad right now, maybe because it's brand new idk, but it may get scuffed up over time. I did notice a small scratch on mine.
Sent from my Note 4
I had this case on my note 5, but had to return it due to yellowing of the sides.. Kinda bummed about that
Sent from my XT1575 using Tapatalk
Thanks for this. Considering ordering this case now.
Hi @jayochs can you tell me what kind of tempered glass did you use on your Moto X Pure?
none. I have a normal cheapo screen protector. not a huge fan of tempered glass.
Sent from my XT1575 using Tapatalk
Case review
Absolutely without a doubt best low profile case for the moto you will find. I also have the i-Blason Halo Series and in comparison the Poetic smokes it by a long shot. Just wish I could have gotten the black and clear.
Hi guys,
I finally got around to doing a review on the Moko Heavy Duty Case for my 6P. I ordered this on amazon.ca. I've rocked this case for about a week now since I did that video, and I am pleasantly surprised.
The cutouts are precise, and the case does not look or feel cheap. The fingerprint scanner is easy to use still as well. The plastic is pretty soft, and I don't think it would stay on on its own without the black shell, but it does fit perfectly. Also, didn't notice much pocket lint or anything else sticking to it like some have reported. Overall it's a great option for a more rugged case for the Nexus 6P, especially here in Canada, where the options can be sparse. Here's the link from amazon.
Nexus 6P Case - MoKo [Heavy Duty] Full Body Rugged Holster Cover with Swivel Belt Clip - Dual Layer Shock Resistant for Huawei Google Nexus 6P 5.7 Inch Smartphone 2015, PURPLE https://www.amazon.ca/dp/B00JP6J1A0/ref=cm_sw_r_other_awd_HnYMwbXKYG11S
11 bucks plus tax, and since I have PRIME, also got free 2 day shipping. Yes, I have a compulsive online shopping problem...
I will also post reviews for my Spigen Rugged Armour and a Poetic Revolution cases shortly.
https://youtu.be/k2k6gPdRPUY
Sent from my Nexus 6P using Tapatalk
I've got one in blue but I don't use it anymore. It's a pretty nice case and the quality is fantastic I just wish they would stop putting those huge bumps on the back for no reason. They serve absolutely no purpose and double the thickness of the phone. They do this on these cases for all phones and just still makes no sense.
RED ZMAN said:
[...] I just wish they would stop putting those huge bumps on the back for no reason. [...]
Click to expand...
Click to collapse
You might be interested in this CoverON case, which has no such huge bumps on the back. It has an unusual 3-piece design, with a hard plastic piece that snaps on from the front of the phone (in addition to the usual one from the back), locking the soft TPU in place in the middle. I'm quite happy with the build quality, and because of the design it seems like possibly the toughest case you can get that (a) still looks even remotely normal and (b) doesn't have an integrated plastic screen protector, making it easy to add a tempered-glass one of your own. (Note, though—I have an IntelliArmor "case-friendly" TGSP, and it fits perfectly but with absolutely no room to spare. Full-coverage TGSPs will definitely interfere with the TPU at the edges of the screen, although because of the way the case fits together you might be able to get them to nestle nicely under it without lifting up.)
daniels220 said:
You might be interested in this CoverON case, which has no such huge bumps on the back. It has an unusual 3-piece design, with a hard plastic piece that snaps on from the front of the phone (in addition to the usual one from the back), locking the soft TPU in place in the middle. I'm quite happy with the build quality, and because of the design it seems like possibly the toughest case you can get that (a) still looks even remotely normal and (b) doesn't have an integrated plastic screen protector, making it easy to add a tempered-glass one of your own. (Note, though—I have an IntelliArmor "case-friendly" TGSP, and it fits perfectly but with absolutely no room to spare. Full-coverage TGSPs will definitely interfere with the TPU at the edges of the screen, although because of the way the case fits together you might be able to get them to nestle nicely under it without lifting up.)
Click to expand...
Click to collapse
Nice to see somebody on this site review that case. Which color did you get? Do you have any holsters to see if this will fit?
RED ZMAN said:
Nice to see somebody on this site review that case. Which color did you get? Do you have any holsters to see if this will fit?
Click to expand...
Click to collapse
I have the black version. Based on the pictures on Amazon the colors looked like they'd be pretty in-your-face, especially since the highlight color is visible directly around the edges of the screen. I'm afraid I don't have any holsters—I've never used one.
I realize, I forgot to mention the most important thing! The headphone and USB-C cutouts on this case, as shipped, are not large enough for most cables. The stock USB-C cable fits but scuffs the sides, many high-quality third-party cables won't, and the only headphone plugs that will fit are the super-tiny ones that some headphones have for exactly this reason. But! If you have a decent utility knife, some courage, and a steady hand, it's possible to enlarge the cutouts without messing up the case. (I cut away a tiny bit of the TPU near the jacks as well, since it was being deformed when plugging in a cable.) With this done it works beautifully—the case is even thin enough to use a Square credit-card reader in the headphone jack.
Every time I look through XDA posts on cases, I always see people getting the most protection possible from their cases. I am opposite - I hate adding any bulk; even .4". I am trying to find a case that just protects the back and sides from little scuffs (not actually anything in regards to dropping it from 4 feet). I know iPhone has a bunch (what a waste) and want to find one very similar. Matte black, silicone that is as thing as possible.
Anyone come across any yet? I can't be the only one that is looking!
Examples (New user - can't hyperlink. Sorry!):
Caudabe - The Veil for iPhone 5/5s
Desmay - The Slight for iPhone 6 Plus
Spigen - Case Air Skin for iPhone 6s
Thanks!
Josh
I'm also looking for this. I currently use the Maxboost mSnap thin, perfect fit case, which seems to be the smallest available, but it's not perfect.
Coming from the S7 Edge, I'm used to cases leaving the side edges uncovered. This Maxboost grips the bezel on every side, making the volume and power buttons difficult to press, and side swiping aggravating.
If I could find something as minimal as the S7e's Spigen Thin Fit, I would be happy.
Many listed and reviewed in these threads
http://forum.xda-developers.com/pixel-xl/accessories/list-hard-shell-polycarbonate-t3475260
http://forum.xda-developers.com/pixel/accessories/ultra-case-t3483579
I use the Rhino Bumper....crazy effective Drop protection, lip on both sides so when you set phone down flat there is no risk of getting scratches. I love this Bumper. Took a minute to understand Charger opening , but now it's smooth sailing and I couldn't be happier
Sent from my Pixel XL using Tapatalk
Here is what I got as a minimal case (I also hate adding any bulk to my phone) - https://www.amazon.ca/gp/product/B01M1DR187/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
I'm really enjoying this matte black case https://www.amazon.com/gp/product/B01LSB371S/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
Scratches on the back of the case are self healing and it's very thin! I use a magnetic car dock and keep the metal plate taped to the inside of the case and it works perfectly for me!
https://www.amazon.com/Pixel-Diztronic-Slim-Fit-Flexible-Google/dp/B01M6Y0KIX might be a good case, i used their products before.
kradkovich said:
https://www.amazon.com/Pixel-Diztronic-Slim-Fit-Flexible-Google/dp/B01M6Y0KIX might be a good case, i used their products before.
Click to expand...
Click to collapse
I have this case. I don't like the lip around the sides. If It didn't have a raised lip around the sides I think it would be a great case
Sent from my Pixel XL using Tapatalk