I have a Asus Zenfone 4S that had soft brick problem. It stuck on booting and not able to entering recovery mode.
It also not detected on the PC only detected cloverview and I already install the driver Intel SOC USB for cloverview but it still can not detected as Asus in device manager.
Many people suggest to unbrick first before but I can not find the following files FW Dnx, ifwi, OS dnx, OS Image for Asus Zenfone 4S (Asus_T00Q).
Please help me to fix this smartphone.
dchochan said:
I have a Asus Zenfone 4S that had soft brick problem. It stuck on booting and not able to entering recovery mode.
It also not detected on the PC only detected cloverview and I already install the driver Intel SOC USB for cloverview but it still can not detected as Asus in device manager.
Many people suggest to unbrick first before but I can not find the following files FW Dnx, ifwi, OS dnx, OS Image for Asus Zenfone 4S (Asus_T00Q).
Please help me to fix this smartphone.
Click to expand...
Click to collapse
Hi
Thank you for using Xda assist
Can't seem to find a dedicated thread for your device.
You may post this here for now and ask again.
http://forum.xda-developers.com/android/help
Thank you.
Thank you very much
reyscott1968 said:
Hi
Thank you for using Xda assist
Can't seem to find a dedicated thread for your device.
You may post this here for now and ask again.
http://forum.xda-developers.com/android/help
Thank you.
Click to expand...
Click to collapse
Thank you so much sir, sorry it my first time posting in XDA forum.
Related
Hey developers , i am a newbie and bricked my andy. Please help me revive it. I installed custom ROM on my Zen Ultrafone 701 HD and was working fine for around 3 months and then started giving problems i had to install back the factory ROM and i did so; I didn,t take any backup before installing custom ROM so found some link which said ROM for my device. I installed, worked for 2~3 days and now my andy is fully dead/bricked doesn't respond in any way but when connected to PC its detecting my MTK device. I tried all the available versions of "SP Flash Tool" and tried to follow the steps, it shows its downloading and within 5~6 seconds it stops and get a pop-up with BROM "Error 3149" I have tried on different systems, USB cable too. Please developers help me resolve this, Thanks in advance.
Hi, thank you for using XDA Assist. It sounds like you've tried all the recommended procedures. The symptoms you described sound like there may be a hardware failure. You could try this one more time and hope for the best, http://forum.xda-developers.com/showthread.php?t=1982587
Good Luck!
That didnt help
jd1639 said:
Hi, thank you for using XDA Assist. It sounds like you've tried all the recommended procedures. The symptoms you described sound like there may be a hardware failure. You could try this one more time and hope for the best, http://forum.xda-developers.com/showthread.php?t=1982587
Good Luck!
Click to expand...
Click to collapse
I have tried all whats mentioned in the link you provided, it didn't help out. Please find the attachment of Errors i get when use Download only and Firmware -> upgrade features! Any other help appreciated
I'm afraid it's a hardware issue and you'll have to send it to the manufacturer or possibly a local cell phone repair shop.
Sent from my Nexus 5 using XDA Free mobile app
Thread closed.
Hey there, I'd like to ask for a little help as my tablet is bricked. I installed Chainfire 3D and the tablet won't boot now. I don't have CWM recovery or anything like that, Can anyone send me a stock .backup file so I can restore my tablet? I couldn't be more thankful if someone did it.
DanteShrine said:
Hey there, I'd like to ask for a little help as my tablet is bricked. I installed Chainfire 3D and the tablet won't boot now. I don't have CWM recovery or anything like that, Can anyone send me a stock .backup file so I can restore my tablet? I couldn't be more thankful if someone did it.
Click to expand...
Click to collapse
bump
bump
DanteShrine said:
bump
Click to expand...
Click to collapse
bump
Hi,
Thanks for using XDA Assist There is no information about your device hence kindly post here Android Q&A, Help & Troubleshooting So that anyone who have used your device may be able to help you
Good Luck!
Hello
I have a problem on my tablet tx201la ASUS I do not know how to get out "I bricked my tablet" I would have to flash a system but I can not find a rom for that. I tried with fastboot and a rom asus for the tx201la masis without success. I rely on you may be a solution here
Excuse me for my small english
Thank you for reading me
craquottine said:
Hello
I have a problem on my tablet tx201la ASUS I do not know how to get out "I bricked my tablet" I would have to flash a system but I can not find a rom for that. I tried with fastboot and a rom asus for the tx201la masis without success. I rely on you may be a solution here
Excuse me for my small english
Thank you for reading me
Click to expand...
Click to collapse
Greetings and welcome to assist. Please try asking in this thread
https://forum.xda-developers.com/showthread.php?t=2626515
as one of the members there has made a system dump
Good Luck
Sawdoctor
Hello,
Trying to solve problem with rooted Asus Zenfone 4 pro X00ID, sorry if this topic already exists, anyhow couldn't find info and I am at the dead end at the moment.
Managed to root Zenfone with magisk, though didn't do any backup with twrp, my bad.., Then accidentally launched system update which lead to phone won't turning on.
Tried to upload stock firmware with fastboot, gives missini android txt. something
Twrp can't install firmware because it recognizes device as x00I, though it states on device that it is x00ID, and I really can't find any info on x00i.
Any ideas?
Emilss said:
Hello, Trying to solve problem with rooted Asus Zenfone 4 pro X00ID,...
Click to expand...
Click to collapse
I don't have this device but, the following area of the forum is specific to your device.
https://forum.xda-developers.com/zenfone-4-pro
With that pointed out...
You may be able to obtain some member guidance within the following thread that's specific to your device.
https://forum.xda-developers.com/showthread.php?t=3706720
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.
Hi everyone, I am a new user here in forum.
I am really needing help with my tablet, model Lenovo tb128fu.
I bought it from China and seller sent me it with a shop ROM. I was worried with safety of this ROM and I decided to download official Lenovo's RSA tool. I used it to install tb128fu global ROM, but now my tablet is stuck in fastboot mode. Any options I select makes my tablet shows Lenovo logo and enter in fastboot mode again. I'm trying to use ADB and fastboot tool to fix the problem, but it is not working (and I don't know exactly what I am doing).
Please help me! It is really important to me.
Thank you.
I made the same mistake but managed to flash a functional firmware for it. I see you posted this about a week ago, let me know if you still need help...
I recommend that you had better contact a Lenovo technical support engineer for assistance.
firecrack3r said:
I made the same mistake but managed to flash a functional firmware for it. I see you posted this about a week ago, let me know if you still need help...
Click to expand...
Click to collapse
Yes, I still need help. Tell me a little more about it, please!
James_Watson said:
I recommend that you had better contact a Lenovo technical support engineer for assistance.
Click to expand...
Click to collapse
Unfortunately I have no Lenovo techinical support, because the product is from China
joaovitorjvbjvb said:
Yes, I still need help. Tell me a little more about it, please!
Click to expand...
Click to collapse
Not sure if I can post external links, I'll PM you.
Try this https://support.halabtech.com/index.php?a=downloads&b=folder&id=146389
Lenovo Xiaoxin Pad 2022 - Обсуждение - 4PDA
Lenovo Xiaoxin Pad 2022 - Обсуждение, Планшет, 10.6"
4pda.to
I am thank you all that helped me with my tablet replying this post and throug conversations. I finally achieved flash ROM in my tablet again!!! I wrote another post here in forum:
My other post
In this post @simplepinoi177 shared with me this link: Link to download where I found and downloaded the TB128FU_CN_OPEN_USER_Q00012.0_S_ZUI_13.5.365_ST_220526_qpst archive. I tried to flash ROM file in my tablet again and I got it!.
In QFIL app I only obtained a "sucess" message after to press "Download Content" button in "meta build" option. All the other procedures failed, including flash in "flat build" mode. Besides that, after I recharged and restarted my device one more time, the tablet starts with ROM (original chinese ZUI 13 ROM) working well.
I am really thankful.