Database Info

Sbf issues win7 x64

I am getting an error when trying to sbf my Xoom where it is saying it fails to communicate with the RAM Downloader. I am running Win 7 x64. I have tried putting the files in the rsd folder, root of C, even My documents, nothing is working. I have also set it up to run as administrator to no avail. I have attached the error log if it helps anyone.
19:59:02, April 15, 2011 Line: 1633 ERROR: MA type 0 is not supported. File: D:\GitProjects2\hdt_windows_flash\flash\code\flashdll\FlashCharacteristics.cpp Device ID: 0
20:02:34, April 15, 2011 Line: 1633 ERROR: MA type 0 is not supported. File: D:\GitProjects2\hdt_windows_flash\flash\code\flashdll\FlashCharacteristics.cpp Device ID: 0
20:04:56, April 15, 2011 Line: 612 ERROR: Interface BP: Error checking the RAM Downloader. File: D:\GitProjects2\hdt_windows_flash\flash\code\flashdll\RDLOp.cpp Device ID: 0
20:04:56, April 15, 2011 Line: 321 ERROR: Interface BP: Error jumping to RAM Downloader File: D:\GitProjects2\hdt_windows_flash\flash\code\flashdll\RDLOp.cpp Device ID: 0
20:04:56, April 15, 2011 Line: 1190 ERROR: Phone[0000]: Flash failed. File: D:\GitProjects2\hdt_windows_flash\flash\code\flashdll\PST_FP_FlashThread.cpp Device ID: 0
20:04:56, April 15, 2011 Line: 597 ERROR: Flash failure: Interface BP: Error checking the RAM Downloader. (Error Code: 9f), Detailed Error Details: Direction of the Error=No Direction, Command Value=0, Code Group Number=No Codegroup File: D:\GitProjects2\hdt_windows_flash\flash\code\flashdll\FlashHdlr.cpp Device ID: 0

[Q] I bricked my XOOM

I tried to update my XOOM through FASTBOOT to ICS! i think i've done something wrong and i bricked it.
i Tried to flash it through RSD lite 5.0 and i keep getting error.
i copied the error log and it goes as:
"
19:03:03, February 14, 2012
Line: 2203
ERROR: Device S Flash MZ600 is not supported.
File: D:\GitProjectsReleases\hdt_windows_flash\flash\code\flashdll\FlashCharacteristics.cpp
Device ID: 0
19:03:03, February 14, 2012
Line: 1045
ERROR: Phone[0000]: Unable to retrieve initialization values from INI file.
File: D:\GitProjectsReleases\hdt_windows_flash\flash\code\flashdll\PST_FP_FlashThread.cpp
Device ID: 0
19:03:05, February 14, 2012
Line: 2203
ERROR: Device S Flash MZ600 is not supported.
File: D:\GitProjectsReleases\hdt_windows_flash\flash\code\flashdll\FlashCharacteristics.cpp
Device ID: 0
19:03:05, February 14, 2012
Line: 1045
ERROR: Phone[0000]: Unable to retrieve initialization values from INI file.
File: D:\GitProjectsReleases\hdt_windows_flash\flash\code\flashdll\PST_FP_FlashThread.cpp
Device ID: 0
19:03:05, February 14, 2012
Line: 546
ERROR: Unable to retrieve initialization values from INI file.
File: D:\GitProjectsReleases\hdt_windows_flash\flash\code\flashdll\FlashHdlr.cpp
Device ID: 0
"
HELP PLZ !!!

omarykm said:
I tried to update my XOOM through FASTBOOT to ICS! i think i've done something wrong and i bricked it.
i Tried to flash it through RSD lite 5.0 and i keep getting error.
i copied the error log and it goes as:
"
19:03:03, February 14, 2012
Line: 2203
ERROR: Device S Flash MZ600 is not supported.
File: D:\GitProjectsReleases\hdt_windows_flash\flash\code\flashdll\FlashCharacteristics.cpp
Device ID: 0
19:03:03, February 14, 2012
Line: 1045
ERROR: Phone[0000]: Unable to retrieve initialization values from INI file.
File: D:\GitProjectsReleases\hdt_windows_flash\flash\code\flashdll\PST_FP_FlashThread.cpp
Device ID: 0
19:03:05, February 14, 2012
Line: 2203
ERROR: Device S Flash MZ600 is not supported.
File: D:\GitProjectsReleases\hdt_windows_flash\flash\code\flashdll\FlashCharacteristics.cpp
Device ID: 0
19:03:05, February 14, 2012
Line: 1045
ERROR: Phone[0000]: Unable to retrieve initialization values from INI file.
File: D:\GitProjectsReleases\hdt_windows_flash\flash\code\flashdll\PST_FP_FlashThread.cpp
Device ID: 0
19:03:05, February 14, 2012
Line: 546
ERROR: Unable to retrieve initialization values from INI file.
File: D:\GitProjectsReleases\hdt_windows_flash\flash\code\flashdll\FlashHdlr.cpp
Device ID: 0
"
HELP PLZ !!!
Click to expand...
Click to collapse
Please use one of the several good rooting guides available right here.
You can try this, but it's not the only one.
http://forum.xda-developers.com/showthread.php?t=1249798
RSD Lite really just doesn't work with the Xoom...we have our own, good tools.
Get familiar with them and use them, please.

okantomi said:
Please use one of the several good rooting guides available right here.
You can try this, but it's not the only one.
http://forum.xda-developers.com/showthread.php?t=1249798
RSD Lite really just doesn't work with the Xoom...we have our own, good tools.
Get familiar with them and use them, please.
Click to expand...
Click to collapse
ok i falshed the recovery img of Tiamat and i cant get the xoom to power on!!
I am new to this, sorry for bothering with silly questions!
now i can boot to recovery android (Tiamat) and fastboot. but i need something i can flash a SBF file to the XOOM ..

Go to Development, look for the EOS ICS Rom for your device, put it and the GApps 10.5 version on your micro sdcard, and flash the rom, and then the GApps file immediately after (follow the instructions in the thread) and enjoy.

Custom recovery development for the k81

Thanks to PizzaG there's now a working build of PitchBlack recovery. Flash it with deadman96385's k81tool
k81-pitch-black-recovery.img
More to come in the near future

Instructions
Download the k81tool and the recovery image
Open a command prompt and change the working directory to the location you saved the tool and recovery image to by issuing this command:
Code:
cd "C:\user directory"
Set up ADB tools in a second command prompt
Enable ADB in the tablets developer options, then issue this command through ADB to boot the device into EDL:
Code:
adb reboot edl
The screen will be black and the LED will be red
Go back to the command prompt that you set to the k81tool directory and issue this command
Code:
k81tool write recovery "C:\user directory"\k81-pitch-black-recovery.img
The output should look like this:
Code:
Sending programmer...Connecting to programmer...log: Binary build date: Mar 26 2016 @ 00:32:43
log: [email protected] [email protected]
log: [email protected] [email protected]
log: Finished sector address 0
log: Finished sector address 0
Writing recovery ...
log: start 491520, num 55508
Write 28420096 bytes, 55508 sectors
Failed: Unknown error
Reset in 5 seconds ...
Reset in 4 seconds ...
Reset in 3 seconds ...
Reset in 2 seconds ...
Reset in 1 seconds ...
Failed: Unknown error
Ignore the "Failed: Unknown error" messages and reboot the device into recovery either by key combination or ADB
Swipe to allow modifications and you should have a working recovery

Download link for what's available. PB and OF built from 7.1, TWRP built from 6.0
https://androidfilehost.com/?w=files&flid=319540

Problem with Nokia Lumia 630 flashing

How can I flash my Nokia Lumia 630?
I tried on WPInternals, but it says:
Flash failed! Error 0x1106: Security header validation failed
I also tried THOR2, which also failed. It says:
Initiating FFU flash operation
WinUSB in use.
isDeviceInNcsdMode
isDeviceInNcsdMode is false
Device mode 6 Uefi mode
[THOR2_flash_state] Pre-programming operations
Disable timeouts
Detecting UEFI responder
Lumia UEFI Application did not respond to version info query
Device is not in Lumia UEFI mode
Device mode get failed, mode is 6
Connection lost, trying to re-connect
Rebooting to the normal mode...
Rebooting from the WP/MMOS failed.
Operation took about 16.00 seconds.
THOR2_ERROR_TO_COMMUNICATE_WITH_DEVICE
THOR2 1.8.2.18 exited with error code 84102 (0x14886)
Can someone help me?

I'm also having issues unbricking my Nokia 630 (RM-979),
It's completely bricked. Nothing shows on the screen. Completely black.
It is detected on Windows Device Manager as QDLoader 9008 (COM7), but I'm not being able to flash it.
I have tried:
- Windows Phone Internals
- Windows Device Recovery Tool
- NaviFirm
- Thor
Result from thor:
> thor2 -mode ffureader -ffufile "C:\rm-914\XXX.ffu" -dump_gpt -filedir C:\dump
THOR2 1.8.2.18
Built for Windows @ 13:36:46 Jun 16 2015
Thor2 is running on Windows of version 6.2
thor2 -mode ffureader -ffufile C:\rm-914\XXX.ffu -dump_gpt -filedir C:\dump
Process started Wed Dec 29 17:13:00 2021
Logging to file C:\Users\Angelo\AppData\Local\Temp\thor2_win_20211229171300_ThreadId-13244.log
Debugging enabled for ffureader
Initiating do FFUReader operations
Version of FfuReader is 2015061501
Parsing FFU... Please wait...
Failed to parse FFU file. Header size: 0x00000000, Payload size: 0x0000000000000000, Chunk size: 0x00000000, Header offset: 0x00000000, Payload offset: 0x0000000000000000
File open failed
THOR2_ERROR_FFUREAD_CORRUPTED_FFU
THOR2 1.8.2.18 exited with error code 84204 (0x148EC)
Any ideas?

Angelo Marzolla said:
I'm also having issues unbricking my Nokia 630 (RM-979),
It's completely bricked. Nothing shows on the screen. Completely black.
It is detected on Windows Device Manager as QDLoader 9008 (COM7), but I'm not being able to flash it.
I have tried:
- Windows Phone Internals...
Click to expand...
Click to collapse
I don't have bricked Nokia, but did you format the whole phone storage when Windows said it's broken? Because it can be the reason why your phone is bricked.

Acer Tablet stuck in DnX mode, almost no fastboot commands work

Hi,
I have an old Acer Iconia One 7 B1-750, and I suspect something is corrupt.
When I start it up, all it says is this:
Code:
Entering DnX mode.
Waiting for fastboot command...
And I have no way of exiting this menu.
Fastboot as root detects the device, however ADB does not.
I tried downloading a stock ROM, however fastboot doesn't want to work.
Bash:
$ sudo fastboot --version
fastboot version 31.0.3p1-android-tools
Installed as /usr/bin/fastboot
$ sudo fastboot getvar all
getvar:all FAILED (remote: 'unknown command')
Finished. Total time: 0.001s
$ sudo fastboot flash boot boot.img
Sending 'boot' (9426 KB) OKAY [ 0.391s]
Writing 'boot' FAILED (remote: 'unknown command')
fastboot: error: Command failed
I'm using heavily modified Garuda Linux.
Code:
[email protected]
.%;888:8898898: --------------
x;XxXB%89b8:b8%b88: OS: Garuda Linux
.8Xxd 8X:. Host: ASUSTeK COMPUTER INC. TUF B450-PLUS GAMING
.8Xx; 8x:. Kernel: 5.17.4-zen1-1-zen
.tt8x .d x88; Uptime: 2 hours, 21 mins
[email protected]; .db: [email protected]; Packages: 2371 (pacman), 12 (flatpak)
,tSXX° [email protected]; Shell: fish
.SXxx bBBBBBBBBBBBBBBBBBBBbSBX8; WM: i3
,888S pd! Terminal: st
8X88/ q CPU: AMD Ryzen 7 2700 (16) @ 3.2GHz
GBB. GPU: NVIDIA GeForce GTX 1050 Ti
x%88 [email protected]@[email protected]@[email protected]@[email protected]@[email protected]@X. Memory: 3.56GiB / 7.73GiB
dxXd dB8b8b8B8B08bB88b998888b88x.
dxx8o [email protected]@;.
dx88 [email protected]
d:[email protected]
.d988999889889899dd.
Linux Cybertank 5.17.4-zen1-1-zen #1 ZEN SMP PREEMPT Wed, 20 Apr 2022 18:29:30 +0000 x86_64 GNU/Linux
How can I get fastboot to work and flash a stock or modified ROM?

niltigospe said:
Hi,
I have an old Acer Iconia One 7 B1-750, and I suspect something is corrupt.
.....
How can I get fastboot to work and flash a stock or modified ROM?
Click to expand...
Click to collapse
I don't know the format of your firmware but you could try flashing the firmware using Manufacturing Flash tool if its Intel-based

Hey
niltigospe​did you find solution?
I've got the exact same tablet with exact same problem. I've been trying to fix it for days and tried almost everything. Tried fastboot with linux machine, and win 7/10, different usb ports, different usb cables, with or without adapters. Nothing seems to work. I've tried the Platform Flash Tool Lite but it just always throws this:
Don't know how to reboot device BaytrailA844BC46, state is 'dnx_os'
ERROR : [Port 0/12/4] Failed to reboot the device
You found any real stock rom firmwares or TWRP images for the tablet?.
I suspect the bios might be corrupted but no idea how to get the original bios or how to flash it to the tablet.