Is there no DEEPSLEEP while charging ??? - Moto Maxx Q&A, Help & Troubleshooting

I am having some confusion Just wanted to confirm that is it normal that while charging the Droid Turbo it doesn't go into deepsleep? I had already posted in cm12.1 thread but i think it would be better to ask it in this section.
I had used latest nightly of cm 12.1 & cm13 and experiencing same thing. I am using wall charger which supports QC 2.0 with name Tronsmart 3 port wall charger.
If there is someone using stock ROM can confirm that whether it's happening in stock ROM or not than i would be thankful (I don't have the stock rom right now). Just simply install cpuspy and reset the timer after you connect the charger and then lock the screen for few minutes and share experience. :angel: mean while i borrow a charger form my meighbour which doesn't support QC 2.0 to confirm its not charger fault. :fingers-crossed:

Deepsleep does not go into effect while the phone is charging. Its a feature of marshmallow put into asop by google, and is not an issue with the phone. The use of deepsleep, or DOZE is to help save battery when you are not using the phone. While the phone is plugged in, its receiving power from the charger and has no need to go into a power saving mode. Your device and charger are functioning as intended

Thanks for the reply and clearing the things for me... i just tested Xperia Z, S3, Note 3 of my friends and came to know they all behave the same while charging....

Related

[ KatKiss-KitKat #019 ]Battery not charging?

Hello.
Yesterday I upgraded from KatKiss #018 to #019. Up to now #018 had worked perfectly, but today with #019 I noticed that when plugging in my charger (I don't have the dock), I didn't get the little 'flash' sign on the battery notification; going into the settings to look at battery usage, I noticed that i said 'Battery not charging' even though I had left the charger plugged in.
I unplugged the charger, turned off the tablet, and replugged the charger, and the tablet turned on, which it does when plugging in the charger and being off.
Has anybody had this problem? Is it really charging but not notifying it? If not, what can I do besides reflashing?
Thanks!
me too
fdelente said:
Hello.
Yesterday I upgraded from KatKiss #018 to #019. Up to now #018 had worked perfectly, but today with #019 I noticed that when plugging in my charger (I don't have the dock), I didn't get the little 'flash' sign on the battery notification; going into the settings to look at battery usage, I noticed that i said 'Battery not charging' even though I had left the charger plugged in.
I unplugged the charger, turned off the tablet, and replugged the charger, and the tablet turned on, which it does when plugging in the charger and being off.
Has anybody had this problem? Is it really charging but not notifying it? If not, what can I do besides reflashing?
Thanks!
Click to expand...
Click to collapse
me too, i just flash it usually,,, battery at 100% wipe cache system etc, when my tf reach 0% it wont charge, but when i charge in off mode ( shutdown TF ) it charge but so long, 8 hour only charge 20% need help to resolve this issue,,,
I have the same issue, battery will not charge. and it seem that it will not get supported here, no answer from the dev, please dev look it up
I am fine with kitkat 19. You guys above may give a try to change a data cable to charge your tablet.
not sure
vegetaxda said:
I am fine with kitkat 19. You guys above may give a try to change a data cable to charge your tablet.
Click to expand...
Click to collapse
If my tf port charge broken,why when off mode my tf wake automatically when connect charger?
My charger perfect work in my friend tf,also when i connect to pc it detected by pc n can transfer data,if it broke,it cant be detected,right?
Sorry for my bad english
Best regard
Riady diethelz
No problems for me and most people I guess otherwise they would stay away from the rom if it was not charging
Try to power off completely your tablet, then cold boot.
Try to change cable, try to test with another charger.
If that doesn't help do a full wipe and a clean install and test again before reinstalling anything else on your tablet.
if that still doesn't help, follow the procedure to report an issue in my signature, I'm not psychic.
Hello.
I have a problem related to the battery as well. Ever since I flashed to #19, my tablet and dock battery seem to run dry very quickly in sleep mode. I have come home from work to occasionally find the tablet unable to boot (it had a dock charge of no greater than 75% and a tablet charge of 100%) and when I plug the charger into the dock and then boot it, I find both batteries have next to no charge.
This is only on timduru's KK#19. I never saw this problem on #18 and below, or any of the previous 'droid versions (4.3.1_029 or 4.2.2_226).
I am currently letting the tablet's battery run to empty and then I will be charging the dock and tablet separately, but this is the first time I've ever encountered this problem.
okay
timduru said:
No problems for me and most people I guess otherwise they would stay away from the rom if it was not charging
Try to power off completely your tablet, then cold boot.
Try to change cable, try to test with another charger.
If that doesn't help do a full wipe and a clean install and test again before reinstalling anything else on your tablet.
if that still doesn't help, follow the procedure to report an issue in my signature, I'm not psychic.
Click to expand...
Click to collapse
thanks for reply, i will try 3rd method because i have do 1 n 2 method but no use,,,its still can charge but in off mode, but it took much time,,,12 hour only get 35% battery,,,,clean instal?format data too???i have do installation step,,,format system,cache dalvik,,,its happen when my battery reach 0%,,,i have try my friend charge,,,but also cant charge,,,but my charger can charge in my friend TF,,,,i will try change other ROM then to check if it also have the same problem...
KatKiss #20 no charging problems here
perompak13 said:
thanks for reply, i will try 3rd method because i have do 1 n 2 method but no use,,,its still can charge but in off mode, but it took much time,,,12 hour only get 35% battery,,,,clean instal?format data too???i have do installation step,,,format system,cache dalvik,,,its happen when my battery reach 0%,,,i have try my friend charge,,,but also cant charge,,,but my charger can charge in my friend TF,,,,i will try change other ROM then to check if it also have the same problem...
Click to expand...
Click to collapse
Did you try another ROM? I'm on #20 and I think I have (mentionable) more battery life. Not charging issues. Guess the fresh installment / wipe helped or an energy eater didn't survive the reinstall. Also I could observe two things (which I don't know of if they are related): Sometimes when the tab was docked it didn't charge. Second the the tab hat a battery problem. When docked and in sleep -> Dock empty next morning. I controlled this with Juice defender but weren't able to locate the problem in an app. This is now gone.
From my experience: I bought 2 power cable for the TF101 (only cable). One works as USB cable with no loading feature (not on USB 3.0 nor on the wallcharger). The other one works as USB connection cable and as wall charger. I can extend the original cable with USB to USB cable to transfer data and charge. I can't get any of that both two (CHEAP) cables to load extended or trasfer data. The two cables I bought at ebay were diffrent vendors. One for ~2,50€ the other for ~4€. If I remember right the original cable where much much more. What I want to say: There are huge diffrences in USB cables. Dunno. It would be a strange accident that the charger or cable broke when / while you intalled a ROM. Could it be that the "intelligent" battery stats are broken somehow? So they think the battery is full and therefor not charge? Or would the icon / indicator then show 100%? Does the icon get its information from the same source (or directly from) as the android battery management?
(ps: 12 hours for 35%=! ROFL!?? What charger is that?)
You may consider having a look at this HowTo
Piehti said:
Did you try another ROM? I'm on #20 and I think I have (mentionable) more battery life. Not charging issues. Guess the fresh installment / wipe helped or an energy eater didn't survive the reinstall. Also I could observe two things (which I don't know of if they are related): Sometimes when the tab was docked it didn't charge. Second the the tab hat a battery problem. When docked and in sleep -> Dock empty next morning. I controlled this with Juice defender but weren't able to locate the problem in an app. This is now gone.
From my experience: I bought 2 power cable for the TF101 (only cable). One works as USB cable with no loading feature (not on USB 3.0 nor on the wallcharger). The other one works as USB connection cable and as wall charger. I can extend the original cable with USB to USB cable to transfer data and charge. I can't get any of that both two (CHEAP) cables to load extended or trasfer data. The two cables I bought at ebay were diffrent vendors. One for ~2,50€ the other for ~4€. If I remember right the original cable where much much more. What I want to say: There are huge diffrences in USB cables. Dunno. It would be a strange accident that the charger or cable broke when / while you intalled a ROM. Could it be that the "intelligent" battery stats are broken somehow? So they think the battery is full and therefor not charge? Or would the icon / indicator then show 100%? Does the icon get its information from the same source (or directly from) as the android battery management?
(ps: 12 hours for 35%=! ROFL!?? What charger is that?)
You may consider having a look at this HowTo
Click to expand...
Click to collapse
i have mention in other thread,,,my charger original from asus,,,my asus has 2 years with me no problem before,,,,it can connect to laptop,buat when charge in on mode it cant,,,my charger ONLY can charge my battery in off mode (device shutdown),i will try full wipe back to factory re root etc,,,and then fresh install,,,,but it will take more time because i am still wait fot 100% battery,,,
perompak13 said:
i have mention in other thread,,,my charger original from asus,,,my asus has 2 years with me no problem before,,,,it can connect to laptop,buat when charge in on mode it cant,,,my charger ONLY can charge my battery in off mode (device shutdown),i will try full wipe back to factory re root etc,,,and then fresh install,,,,but it will take more time because i am still wait fot 100% battery,,,
Click to expand...
Click to collapse
if it takes that much time even when it's off, it means that it's only charging at 5V.
Also at 5V it won't charge unless the screen is off if I remember well.
There's a special pin/connection made in the cable for the charger to detect that it's a Transformer plugged that will make it charge at 12+V
There's most likely a pin/ contact broken either in your cable / charger /tab, that prevents it to charge at high voltage.
perompak13 said:
i have mention in other thread,,,my charger original from asus,,,my asus has 2 years with me
Click to expand...
Click to collapse
So you say you go with option #3 then because u already did option 2, right? Quote Tim on option 2: "Try to change cable, try to test with another charger.".
So you have 2 x THIS and 2 x THIS? Because that would mean, what Tim suggested I guess. As far as I know this is the only way ASUS shipps the original TF101.
I'm asking because most people that I know would buy another noname charger or even just a noname cable instead of horribly expensive original pieces. If you really got the 2 x 2 pieces shown above,
then I'd guess wether your tablet is broken or the software on it is broken. But again: Did the charging problem REALLY firstly appeared when intalled the ROM? Or did you install the ROM because of the
fault? Or don't you exactly know.
To point out again: It would be a strange coincidence, that both cables AND adapters would stop working exacly at the same time when u installed #19. If you use 2 different cables at the same adapter: Then it's possible that the adapter is broken and only gives the USB (5V) loading speed. If you use 2 adapters and 2 cables and tryed all combinations: The most likely something with the tab isn't cool. The software or the hardware...
timduru said:
if it takes that much time even when it's ...
Click to expand...
Click to collapse
Precisely what I meant.
Cheers.
I have loaded #29, and I started seeing this issue immediately. It was fine before that. After loading the ROM, it would only charge when TF is dead. I have the original charger and cable that came with it which was working fine before the upgrade. So, I don't suspect either of them.
kandhavelr said:
I have loaded #29, and I started seeing this issue immediately. It was fine before that. After loading the ROM, it would only charge when TF is dead. I have the original charger and cable that came with it which was working fine before the upgrade. So, I don't suspect either of them.
Click to expand...
Click to collapse
I was going with #29 and #30. Havent seen or heard about any loading issues but that was related to loading the tab on an USB port ... What actually is an bad idea even on USB3.0.
Gesendet von meinem Transformer TF101 mit Tapatalk

[Q] OPO Charging Cable not working with OPO

Hello so i have been using OPO since a month now and suddenly it won't charge so i tried to charge it with a different chargers and they were working..
but here is the thing i don't understand..
the original charger with original cable which came with it is not charging my phone but the same charger is working with other phones so it means the charger is fine.. more over when i plug my samsung usb cable in my OPO charger then it starts to work again but i'm not receiving 2A charge from that cable..
please suggest me something guys..
btw i'm running latest cm update XNPH33R
anyone ? the charger seems to be working with every mobile.. please somebody suggest me something..
It's possible the charger is damaged and only capable of producing a certain percentage of it's original Amperage.
So if you plug in a phone that, say, takes only 1Amp it may work fine but it will break down when your OPO tries to actually use up 100% of the charging capacity.
Smartphones detect unstable/unsafe power sources and can reduce charging current or refuse to charge at all, which may be happening here. I had a defective charger too - in idle it was still providing 5.01V but it did not manage to handle any significant load.
Open a support ticket with OnePlus and have them replace it. In the mean time, I can recommend Anker's wall chargers but any charger will do.

Need urgent help..

I am longer able to charge my phone properly using a wall charger... It only takes 100ma current when plugged to an Ac source..
It charges properly when connected to a USB port..
I was running on cm 12 + Boeffla kernel when I first had this problem..
Tried wipe/data cache and now flashed stock 4.3.
Still no use it takes around 1 hours to get 2% charge on Ac.
Ps. Battery is working properly got about 1 day backup. ​Anyone please help me with this asap
Charger defect? Cable defect?
Usb Plug dirty or dusty?
Tried another wall charger?
Andi
Tried 3 different chargers but no hope
But I've found a temporary solution by enabling ignore unstable power and safety margin in Boeffla kernel config app.
It seems to be working... Thanks to Boeffla kernel for saving my phone.

Moto Maxx Charging Problem

Hi
This is my first topic
Sorry for my english
I had a problem with my quark
Charger not charging rightly
Cable and adaptor is original
I connect charger tu phone not charging immediately
I should connect and disconnect adaptor maybe charging was start
I bought a AUKEY charger, support quick charge 2
But i had thats problem with this too
Some times i try 20times to charging
And some times my navigate buttons not working
I should lock and unlock my phone to working
Plz help me
I love my quark but these problems made me crazy
I flash any stock rom, kitkat ,5 and 6 and cm13 snapshot, in every rom a had thats problems
I think this is a hardware issue
It could be the cable. I started to have issues with mine. Thankfully I have another quick charge and supported cable. By switching each one out, I was able to diagnose that the original cable was starting to wear out, and not hold as tight in the charging port of my phone. So when I plugged it in, just the act of placing the phone down loosened the connection to effect charging. So I purchased a new cable, all good now.
kingersj1 said:
It could be the cable. I started to have issues with mine. Thankfully I have another quick charge and supported cable. By switching each one out, I was able to diagnose that the original cable was starting to wear out, and not hold as tight in the charging port of my phone. So when I plugged it in, just the act of placing the phone down loosened the connection to effect charging. So I purchased a new cable, all good now.
Click to expand...
Click to collapse
Thanks you
But i testet many cable
I hold canle up and down from charging port but not effect
No anyone knows ?
All yoir device havent any problem??
magi1991 said:
All yoir device havent any problem??
Click to expand...
Click to collapse
I too have an Aukey charger, and not any problem here. Can you install Ampere from Google Play, and share us some Screenshot, maybe something is wrong with the voltage or amperes in your charger or your smartphone
Moto Maxx charging Issue
Hi
Try this follow steps for charging issues of Moto Maxx.
- Power the phone down.
- Press and release the power button.
- When you see the Motorola Dual Core screen simultaneously press the up/down volume keys until you see SAFE MODE show on the screen, then release the volume keys and use your device as you normally would.
When you want to exit Safe mode just reboot the phone.
Thanks
motorolaservicecenterchennai.co.in
Motorola Service Center in Chennai
magi1991 said:
Hi
This is my first topic
Sorry for my english
I had a problem with my quark
Charger not charging rightly
Cable and adaptor is original
I connect charger tu phone not charging immediately
I should connect and disconnect adaptor maybe charging was start
I bought a AUKEY charger, support quick charge 2
But i had thats problem with this too
Some times i try 20times to charging
And some times my navigate buttons not working
I should lock and unlock my phone to working
Plz help me
I love my quark but these problems made me crazy
Click to expand...
Click to collapse
veccini said:
I too have an Aukey charger, and not any problem here. Can you install Ampere from Google Play, and share us some Screenshot, maybe something is wrong with the voltage or amperes in your charger or your smartphone
Click to expand...
Click to collapse
when i was on stock rom any chargers couldent enable turbo charging on phone and always says "slow charging" i had thats problem too some timg charging sometime not!
charging time was 6hours or more.
after a while i flashed final snapshot cyanogenmod aftar 4,5times connect to electricity charging start and just saying "charging" but i know is turbo charging!
because charging time is short 2hr or less!
moto service said:
Hi
Try this follow steps for charging issues of Moto Maxx.
- Power the phone down.
- Press and release the power button.
- When you see the Motorola Dual Core screen simultaneously press the up/down volume keys until you see SAFE MODE show on the screen, then release the volume keys and use your device as you normally would.
When you want to exit Safe mode just reboot the phone.
Thanks
motorolaservicecenterchennai.co.in
Motorola Service Center in Chennai
Click to expand...
Click to collapse
i tried this many time ago..

LE Eco Le1s battery not charging when the handset is on but only charges when off

Hi Friends. I have this weird issue with my le1s. It's only charging while it's off. please tell me if any one of you would know how to address this issue and what might be wrong with it. Thanks in advance.
Are you using the original letv charger and adaptor? This issue usually pops up when the charger that you are using delivers very less current. So when you power on, it charges in a higher speed and may be the cable/ adaptor is not able to deliver enough current. Please check and let know if a new cable/adaptor fixes the issue.
thetriton said:
Are you using the original letv charger and adaptor? This issue usually pops up when the charger that you are using delivers very less current. So when you power on, it charges in a higher speed and may be the cable/ adaptor is not able to deliver enough current. Please check and let know if a new cable/adaptor fixes the issue.
Click to expand...
Click to collapse
That's a good point. I did buy a replacement cable as i had lost the original one...I'm not sure about the adapter being at fault...will need to get a new set to see if this fixes the problem. worth a try though. appreciate your inputs. :good:
Just make sure that the replacement cable is of a good quality. I'm using mivi cable and that's pretty good. Can be found in amazon. Happy to help. Cheers!
I'm facing same problem and found a solution
crooner999 said:
Hi Friends. I have this weird issue with my le1s. It's only charging while it's off. please tell me if any one of you would know how to address this issue and what might be wrong with it. Thanks in advance.
Click to expand...
Click to collapse
Please use original charger if you're using original cable because our original cable needs 12v output if you're using another charger then don't use original cable instead use a Type-C connector along with usb 2.0 charger it will surely charge your mobile while you're using it.
I'm too facing the same issue ,I'm using original charger and adapter with latest os version installed
crooner999 said:
Hi Friends. I have this weird issue with my le1s. It's only charging while it's off. please tell me if any one of you would know how to address this issue and what might be wrong with it. Thanks in advance.
Click to expand...
Click to collapse
Like all the other replies say you should have a good cable. But your mobile should charge even when it is switched on. Maybe too many apps are running in background, due to which it is not charging fast enough to notice.
My le1s is charging but when i put my phone in charging at 11:30 pm at that time my battery was 12 and my phone was charging but when i sawed at 9:00 am the battery was 9 percent please help me!!!
hi my le eco 1s charging only in off mode also the c type pin working one side only.
hi my le eco 1s charging only in off mode also the c type pin working one side only. over heating while charging. after 100% charged, it remains 100% till it gets on. once on, it got discharged fully with in hour.

Categories

Resources