The point of the topic:
Post your issues found in STOCK / CM11 or post a solution.Simple as that,very productive.
I'll start with a list of bugs:
CM11 ISSUES:
-Video recording lags in reduced luminosity.
-The phone heats too much when playing/watch videos for long time and so on.
-Volume during call is too low.
-Ocasionally freezes & crashes.
-Some graphical issues when the phone freezes.
-Wifi MAC Address is always 00:0a:f5:89:89:ff.
If there are 2 Xperia L using CM11 / Custom Kernel connected to the same wifi, both connections will be dropped.
STOCK ISSUES:
-Video blinks in low light(from what I've read it focuses wrong on the light source and starts blinking).
-The proximity sensor remains on after a missed call.
-Multi touch doesn't work as well as on CM11.
-Some weird freezes during call ( the screen remains off / freezes and you can't end the call / sometimes even answer )
-Camera doesn't have as much detail as in CM11 ( if you zoom in,the image doesn't clarify).
-Wifi MAC Address is always 00:0a:f5:89:89:ff.
If there are 2 Xperia L using CM11 / Custom Kernel connected to the same wifi, both connections will be dropped.
CM11 FIXES:
-Lag in video recording can be reduced by lowering the exposure.In medium to low light " - 1 " works pretty good and in very low to low light " - 2 " .However,when you use " - 2 " ,the recorded video will be very dark.Still haven't found a solution for this.
-About heating problem,you might want to try @Shivam Kuchhal 's kernel.He reported that his phone doesn't get heat up more than normal.
-About volume during call,it's been solved partially in newer releases by editing snd_soc_msm file.However,if the value is too high,the phne volume will also be too high and the speaker will produce distorsioned sound.However,I see they found a resonable value and both,the volume during call & speaker is about fine.
-For headset buttons not working,you must edit Generic.kl file.Here's a short tutorial to help you:
Go to: system/usr/keylayout/Generic.kl and change as below
key 226 HEADSETHOOK
key 256 BUTTON_1
change to
key 226 BUTTON_1
key 256 HEADSETHOOK
STOCK FIXES:
-For proximity sensor and weird freezes during a call use this tutorial .Haven't tested it personally,but people reported it works even on latest .17 fw.
-For Mac issue [ works for cm11 as well ]
1)Restore original MAC Address
Open /data/etc/wlan_macaddr0
Copy it's content. Ex: 01:12:13:14:15:16
Open /etc/firmware/wlan/prima/WCNSS_qcom_cfg.ini
Find this line
Code:
Intf0MacAddress=000AF58989FF
Replace 000AF58989FF with the content of wlan_macaddr0, but write back to front. Ex: from 01:12:13:14:15:16, write to 161514131201. So it will look like this
Code:
Intf0MacAddress=161514131201
Save & Exit, Reboot the phone
That's all for now,continue to post bugs&fixes and most important:
HELP EACHOTHER
Marius Cristian said:
The point of the topic:
Post your issues found in STOCK / CM11 or post a solution.Simple as that,very productive.
I'll start with a list of bugs:
Click to expand...
Click to collapse
Proximity fix not working!!!
More Kitkat Bugs List:-
1. Headset buttons
2. Camera experiencing crashes randomly, sometimes cause overexposure and being unstable at flash mode
3. Black graphical glitch/scanning effect first time after you turn your screen off then on again after first restart/turning on phone.
4. Call bugs(e.g. distortion etc.)
5. Lag when using the video camera
6. battery draining faster then on stock rom. (was improved on early nightly releases....now its back again)
7. GPS not working again (for some it does...others it doesnt....again...wasnt there on first nightlies)(Mostly Happens In CM11)
8. Camera quality is much,much worse then on stock rom
9 . Phone may left hanging and screen wont turn on for several seconds...
10. Some apps are unsupported on playstore...
CM11 bugs
CM11:
1. Switch to HDR mode and within 3 snaps camera app will FC.
2. Headset buttons.. I have to manually edit that Generic.kl after every nightly update.
3. As mentioned above, graphical glitch after updates.
Some of bugs that u mentioned @David pro has been fixed by users, but device maintainer didn't merged it for some reason in official builds. So, get started:
1. These buttons can be fixed, someone(I don't remember who, Sorry) has created a modified Generic.kl. You can find that file somewhere on this forum.
2. Camera quality is medium, but videos are very poor..
3. Still exist
4. @up
5. As I said, videos are bad
6. Caused by Google Play Services, 1st method is use xposed Framework and one of its add-ons, 2nd is just disable Services from Settings>Apps(i'm using second one, because I just don't like Xposed)
7.GPS is working fine, at least for me. No fix needed
8.Yep, on stock it is better.
9.It's caused by "Black graphical glitch/scanning effect first time after you turn your screen off then on again after first restart/turning on phone."
10.Well, some of them are only for one platform or type of devices,eg. Tegra 4 games.
No heating issues noticed so far(I use my kernel obviously) and yeah the camera and video quality isn't anything worth praising. Also the hwcomposer issue happens only one time after every boot, after that its all fine.
I normally use AOSPA.
Actually,I think the cm11 camera takes better photos than stock,but it can be buggy sometimes :silly:
About GPS,it's working fine for me too.
About video camera being laggy...I think it's because our phone lacks drivers update.It's hard to believe the video camera will ever be 100% fixed.
I'm sorry I'm kinda busy those days and I don't have time to administrate this thread.I'll edit the main post as soon as I can with solution you guys posted.But it's true,there are things which can't be fixed.Until I come back, HELP EACHOTHER
an another bug with stock rom is that "camera not available "or the camera takes a long time to recover after taking a shot
chrome browser restarts the phone or makes the phone to hang
vishalaestro said:
an another bug with stock rom is that "camera not available "or the camera takes a long time to recover after taking a shot
chrome browser restarts the phone or makes the phone to hang
Click to expand...
Click to collapse
Haven't experienced those kind of issues when I used stock.Try to do a factory reset or flash the ftf again.Maybe you added some mods or apps which affected the system.
Overall,we have to admit that CM11 is blazing fast and that's why I'm still using it.I'll update the OP now with your solutions.Thanks guys and keep helping eachother.
Marius Cristian said:
Haven't experienced those kind of issues when I used stock.Try to do a factory reset or flash the ftf again.Maybe you added some mods or apps which affected the system.
Overall,we have to admit that CM11 is blazing fast and that's why I'm still using it.I'll update the OP now with your solutions.Thanks guys and keep helping eachother.
Click to expand...
Click to collapse
another BUG with the stock ROM
1)walkman app flickers in the widget lockscreen
2)poor memory management need to restart the phone daily else the phone lags like a hell
3)camera app didn't respond ,it doesn't even the focus sometimes ,clearing the app data solves this problem temporarily and i think it was not present with the .12 update ,so if anybody could extract the camera app from the .12 update similar to the phone app freeze issue the problem might be solved.
3)walkman app or any other music player makes music to stutter when the same song is played more than one time provided if the songs are stored in memory card also i know that my sdcard doesn't have any problem because it worked fine with galaxy s3.my sd card is sandisk ultra class 10 32 gb
4)battery drain heavy when wifi is switched on compared to previous android 4.1.2
note:i have not rooted my phone or modded my firmware .all i run is the apps taken from the playstore.i have done a factory reset for more than 4 times.
CM11 / Stock (using custom kernel) bug:
Wifi MAC Address is always 00:0a:f5:89:89:ff.
If there are 2 Xperia L using CM11 / Custom Kernel connected to the same wifi, both connections will be dropped.
Solution:
Restore original MAC Address
Open /data/etc/wlan_macaddr0
Copy it's content. Ex: 01:12:13:14:15:16
Open /etc/firmware/wlan/prima/WCNSS_qcom_cfg.ini
Find this line
Code:
Intf0MacAddress=000AF58989FF
Replace 000AF58989FF with the content of wlan_macaddr0, but write back to front. Ex: from 01:12:13:14:15:16, write to 161514131201. So it will look like this
Code:
Intf0MacAddress=161514131201
Save & Exit, Reboot the phone
solution for Play Services battery drain in CM11
CM11 issues
1. GPS Not Working
2. NFC not Working.
3. NFC icon not provided in Status bar when NFC is ON.
4. Frequent Crashes : Blue Screen on latest Nightlies 20140827.
5. Camera quality getting worse.
chinmay1234 said:
1. GPS Not Working
2. NFC not Working.
3. NFC icon not provided in Status bar when NFC is ON.
4. Frequent Crashes : Blue Screen on latest Nightlies 20140827.
5. Camera quality getting worse.
Click to expand...
Click to collapse
Nfc icon not in statusbar is on all cyanogenmod/aosp based rom
chinmay1234 said:
1. GPS Not Working
2. NFC not Working.
3. NFC icon not provided in Status bar when NFC is ON.
4. Frequent Crashes : Blue Screen on latest Nightlies 20140827.
5. Camera quality getting worse.
Click to expand...
Click to collapse
1. For many people works,for some don't.I don't understand how's possible...
2.Haven't tested it...for me it's a useless feature.
4.Well,crashes happens.However,they're not too frequent.
5.I really like the photos cm11 takes.About video...another story.Try to notice the details in the photos in comparison with stock.
I am going back to stock in order to see if I can obtain(with all the bug fixes from here) a more stable software than cm11.I'll report to you soon guys.Until then, help eachother
@underd0g
Nice fix for WiFi-Mac interference problem. :good:
Marius Cristian said:
1. For many people works,for some don't.I don't understand how's possible...
2.Haven't tested it...for me it's a useless feature.
4.Well,crashes happens.However,they're not too frequent.
5.I really like the photos cm11 takes.About video...another story.Try to notice the details in the photos in comparison with stock.
I am going back to stock in order to see if I can obtain(with all the bug fixes from here) a more stable software than cm11.I'll report to you soon guys.Until then, help eachother
Click to expand...
Click to collapse
guys please try to solve the issues with stock ROM because they are the stable ones and the bugs are easily repairable if the bugs are reached to right hands.so pls first concentrate on stock ROM
I've been playing around with 4.4 video recording..what i think is the lags occurs when we record in low lights related with the kernel..i'm testing with snapcam as its has auto flash when recording in low lights..First result is same as stock..but in snapcam it has touch to focus when recording..after touch,the recording will get a bit darker when it refocus and walla..no lags..
What i found is, the camera will automatically reduced the exposure to -1 for avoiding the lags even it is on default setting..
When moving the camera in low lights,the recording will lags again after few second..that is with continuous focus..set to normal or auto..no lags..so our stock cam using continuous focus for recording..
Back to the kernel thing..from what i see from the recording is same like this when i'm playing with cnt rom to to get wifi and overclock working.
Ok,so I went back to stock.I'm amazed by the battery life,it lasted 2 days and I used the phone a lot ( especially for calls ).
However,after using the fix for freezes during call and so on,I still have experienced this morning an issue.While I was talking to someone,someone else called and the phone was beeping but the screen was frozen.I had to press the power button to lock the device then unlock it to get the screen to show who's calling and to give me the possibility to answer the call.What do you think I should do?For now I'll wipe phone app data,but I'm also waiting if someone knows a good,another solution to post.
Anyone know a way to remove the automatic shutdown?
My phone shuts down if it reaches 25%
Hi guys,
I installed N915FXXU1COH2 ROM (lollipop 5.1.1) on my Note Edge, flashed micky's kernel and rooted it;
but now the screen stay always on when I receive a notification, or if I press the power button without unlock it. Do you have the same problem?
At the moment for solve I use Tasker, but it's not convenient for many reasons.
I try also to start in safe mode (disabling all non stock apps) but the problem is yet present.
Let me know, thanks.
This is my first time installing custom ROM's on my otherwise stock Sprint Motorola photon 4G LTE. After successfully flashing CM13 (2016_08_20 snapshot release), I tried to make a call, and upon hitting "call" from the dialer, the screen goes black and stays that way. The only recourse is to hold down power button long enough to reboot. While the screen is black, there is no sound from the ear piece (i.e. it does not appear that the call is connected). Finally, while the screen is black, the phone does exhibit some reactions: it vibrates sometimes if I hit the power button, in other words, the device is still 'on" until I have to reboot it.
After this happened, I gave up on CM13 and flashed CM-12 (the latest snapshot release, from 2015) , and experienced the same behavior.
The call apparently was completed, because the other party received a missed call. However, there was no sound on my end (although there was side-tone, when I breathed on it)
I googled for about an hour, and saw examples of the same behavior on other devices claiming to be related to the proximity sensor (though in those cases, there apparently was audio in the ear piece-- ie. the call completed, and was in progress while the screen was black). This behavior was not observed a few minutes before under stock ROM in the same device (so doubt it's a strictly hardware issue, so doubt I need to open the device and clean the sensor, per some of the suggestions out there).
I suspect the answer is very basic, because I found no similar threads searching XDA.
Please let me know any ideas. I did not do anything about updating my baseband version from stock before flashing the CM ROMs., but don't know if I have to I'm a noob at custom Rom's and just remembered that you had to worry about the baseband / radio version back on the HTC Evo 8 years ago, which was my last time flashing. Again, the ROM itself worked fine-- wifi and 3G/LTE connectivity was a success.
Let me know any ideas.
thanks
After restoring to stock, dialing worked again on the phone, but the behavior on the device was different from two other photons I tested next to it.
In the stock ROM, the call connected, but the screen turned off immediately upon hitting "call" (even when the phone was on the desk). You could get the screen back (in stock only) by hitting the power button.
In my other two photons, the black screen does not kick-in immediately. So it does appear it could be something having to do with the proximity sensor (i.e. it's always engaged). I don't have the skills to confirm. I am writing-off this phone for now, and have a different device (so not a high-priority thread at this point), but let me know if anyone has any ideas. Thx.
There's a way to validate if the prox sensor is working - zDeviceTest in the Play Store will test all of the hardware, and it will also show the metrics each piece of hardware is receiving - the prox sensor being fairly simple, it just identifies if an object is "near" or "far".
I always recommend making sure everything works in the stock ROM before flashing anything custom - as you need to validate everything works before making tweaks.
My advice is the same as arrrghhhs. (This name really looks like it was typed with a Photon Q with some characters repeated by the device >.>)
I noticed that my proximity sensor sometimes "stuck" to near (I use some different app [SatStat] so it shows 3 cm or 100 cm instead of near/far). Winking a little above the sensor helps sometimes. But your problem sounds like a defect.
Hello all,
There is a consistent issue that i have been dealing with ever sense the Oreo update rolled out that I have not been able to find a solution for. At times ( watching a Youtube video/ listening to music from Spotify) media audio would begin playing from the phone as if it was ring/ notification audio. All sounds coming from the phone would get cut back in volume by a significant amount and the bottom speaker stops firing completely.
This only seems to happen once I interact with the app after starting to play the video/song (i.e i go to pause a video/ advance 10 seconds). From that point I would need to leave the app and come back for the audio to go back to normal.
As well I have been having audio video sync issues with the Youtube app that I have never dealt with before, related?
I have the US duel sim variant
I am on build number 47.1.A.5.51 , November security patch
I have tested with all audio settings on/off ( EQ, S-Force,ClearAudio+,normalizer)
I have checked the service test menu and everything is shown as calibrated.
Restarted the phone, cleared various caches for apps
I really am at a loss here, anyone else having these issues? Any possible causes/ solutions?
I had that issue on the first version of oreo... I found the latest oreo update fixed it. Maybe uninstall youtube app and reinstall again?
Were you able to fix this issue?
I have the same problem but for me it happens on all applications.
Mate 20 Pro on EMUI 10, although the issue was also there on EMUI 9
Hi all,
I have what seems to be the same issue but in Android 9 PIE, & latest build 47.2.A.10.107.
I didn´t had this issue in my Xperia XZ Premium G8141 (single SIM) , now it happens after switching to a Xperia XZ Premium G8142 (same phone, but dual SIM, same as you have).
In my case I get around opening volume controls and moving the ring and notification volume (with its slider) for some amount back and forth.
Y don´t use youtube so much (in the phone screen) then I cannot tell if it happens with youtube, but does happen in Spotify and it is very annoying to have to correct every now and then.
Then, same phone, completely different Android version, hardware problem?
Will appreciate any hints or troubleshooting tips from you guys.
When I have some time I will take a look to the kernel messages cable-connecting the phone for USB-debug.
Thanks in advance,
Take care,
Alvaro