[ROM][6.0.1][TW][N910C/H/U] Hani Base v1.01 [18-04-2016][Deodexed][PreRooted] - Galaxy Note 4 Android Development (Exynos)

Welcome to Hani Base ROM thread!
Samsung Galaxy Note 4 SM-N910C
N910CXXU2DPCB TW 6.0.1
THREAD INDEX:
I. INTRODUCTION
II. FEATURES
III. DOWNLOADS
IV. HOW TO FLASH
#_____________________________#​
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for any bricked devices, dead SD cards,
* or any kind of damage to your phone whether soft or hard brick
*/
I. INTRODUCTION
This ROM is based on N910CXXU2DPCB firmware. It is stock Deodexed with no modification on framework nor on apps.
It can be used as a base ROM too if you want to build a ROM of your own over it.
II. FEATURES
ROM features
Based on N910CXXU2DPCB Firmware (TW MM 6.0.1).
H-Vitamin Kernel.
Deodexed & Zipaligned.
Build.prop Support.
Init.d Support.
Busyboxed/Rooted.
Debloated few apps (which you can find in PlayStore).
No wifi problems.
Symlinks & Permissions are set properly.
Private mode support.
Kernel Features:
Basd on N910CXXU2DPCB
Stock Features (Built with Stock Toolchain)
SELinux Permissive
Wifi Setting Fix (Doesn't forget wifi passwords).
Screen mirroring / AllShare Cast fix
Init.d Support
ADB Insecure
CSC Features:
Enable Call Recording.
Enable Camera During Call.
Enable Camera Shutter Sound Menu.
Do not pause music while taking a video.
Enable Call Button In Log List.
Enable Email Alignment For RTL.
Sat Calendar Colors 'BBBBBRR'.
ScreenShots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
III. DOWNLOAD
Download Link - AFH
For N910U/H users,
The ROM has been tested on both variants with its corresponding kernel. Make sure you flash your MM bootloader and modem, in order to avoid no service problem, random reboots....etc.
IV. HOW TO FLASH
Flash the Bootloader through Odin.
Flash TWRP 3.
Flash Modem through TWRP.
Wipe Data/System/Dalvik/Cache
Flash HaniBase_N910C_MM.zip
Reboot
First boot takes long for the phone to boot, grab a cup of coffee, set back, and wait till your system boots.
:good: Enjoy and feedback is always appreciated :good:​
-
XDA:DevDB Information
Hani Base, ROM for the Samsung Galaxy Note 4
Contributors
Hani K.
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: MM BL/CP
Based On: Samsung Sources
Version Information
Status: Stable
Current Stable Version: v1
Stable Release Date: 2016-04-10
Created 2016-04-10
Last Updated 2016-04-18

Changelog
Changelog:
18-04-2016 - v1.01
Base:
Fixed Knox security issues.
Updated SuperSu Binary.
Updated H-vitamin.
Kernel:
Fixed Adb for MM.
Fixed private mode.
Fixed some permissions.
Improved compatibility.
Added Busybox the latest version.
Added N910U Support. (Check OP)

Awesome! I'm getting it now. Quick question though, how's root support like? built in or should I flash over SuperSU

hamsteyr said:
Awesome! I'm getting it now. Quick question though, how's root support like? built in or should I flash over SuperSU
Click to expand...
Click to collapse
Hani K. said:
II. FEATURES
ROM features
Busyboxed/Rooted.
Click to expand...
Click to collapse
Is it really that hard to read?

quadlt said:
Is it really that hard to read?
Click to expand...
Click to collapse
Somehow ended up jumping over it while looking for the word root. huh. Thanks anyway.

Thanks alot. Downloading already. Gonna try flashing this on N910H and see how it turns out
Відправлено з мого SM-N910H через Tapatalk

If I am on cm13 should this fix efs files problem??

Screen shot please!!!!!

@Hani K. Does this rom include ExtSD write fix?
Sent from my SM-N920C using Tapatalk

foggydisaster said:
Thanks alot. Downloading already. Gonna try flashing this on N910H and see how it turns out
Відправлено з мого SM-N910H через Tapatalk
Click to expand...
Click to collapse
Please let us know what happens.

M_Abozied said:
If I am on cm13 should this fix efs files problem??
Click to expand...
Click to collapse
Take a full backup of your efs.
This could fix the efs incompatibility issue.
rezaef said:
Screen shot please!!!!!
Click to expand...
Click to collapse
Done.
DTS_ManiaC said:
@Hani K. Does this rom include ExtSD write fix?
Sent from my SM-N920C using Tapatalk
Click to expand...
Click to collapse
Marshmallow has a different policy for ExtSD.
I kept that to stock for now.

Xposed working?

mephistooo2 said:
Xposed working?
Click to expand...
Click to collapse
Only one way to know

THANKS

can i flash this with 5.1.1 BL and 5.1.1 modem on my n910h?If can please share here. thank you

harisptma said:
can i flash this with 5.1.1 BL and 5.1.1 modem on my n910h?If can please share here. thank you
Click to expand...
Click to collapse
Of course not!
you need N910H bootloader!
Edit: I just got a confirmation from a guy that the ROM works on N910H, but your system won't recognize EFS info (Unknown IMEI).
It was tested on BL: N910HXXU1COH4.

I can't flash the modem with Odin because it is a zip file. What to do, will i have any connection if I don't flash the modem?

M_Abozied said:
If I am on cm13 should this fix efs files problem??
Click to expand...
Click to collapse
Probably... No...
Sent from my SM-N910C using Tapatalk

wowrlz123 said:
I can't flash the modem with Odin because it is a zip file. What to do, will i have any connection if I don't flash the modem?
Click to expand...
Click to collapse
Flash through TWRP!
sorry for the misleading in the topic, thought that's common sense, I'll edit OP.

Windows reporting trojan for odin on the server

Related

[OMNI] [4.4] [BETA] [p51XX] Omni build #3 Unofficial

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What is Omnirom?
A new Android custom rom has been announced at the BABBQ (Big Android BBQ) by @XpLoDWilD, @Chainfire, @Dees_Troy & Team. For more information go to omnirom's website
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
* If you dont like this rom, Stay away from this thread!
*/
WHAT IS NOT WORKING?
at first boot, you must skip all settings and go to Settings / language & input / default input / and disable hardware keyboard
some black box on certains apps, use chrome or alternate browser not stock
Rotation do not work, you're stuck in landscape
some graphics glitch
Video playback do not work but sound does
How To Flash:
Download Omnirom
Copy zip to your phone
Goto CWM you MUST have this recovery see og thread
Wipe Everything
Install zip from sd card
Install gapps( i use PA gapps)
Install supersu update from here
Contributors
Sevenup30
Kernel from @CodyF86 his thread thanks him
ROM OS Version: 4.4 KitKat
ROM Kernel: CM kernel
Based On: AOSP
Version Information
Status: Beta build
Created 2013-11-19
Last Updated 2013-11-26[/QUOTE]
Download
p511X
http://www.mediafire.com/download/mxknapx5kiyaf9j/omni-4.4-20131126-p5110-HOMEMADE.zip
p5100
http://www.mediafire.com/download/dhv2ks3dbkskssq/omni-4.4-20131120-p5100-HOMEMADE.zip
Screenshots
https://plus.google.com/102533864961179619916/posts/NwWYFQqfh1b
NOTE
...
have you tried gameguardian or freedom on this rom? are they working?
So excited for this, thanks...but...i am having major issues, no root, performance settings crash, and it seems like a lot of settings are missing, (nav bar, quick tiles, notification, etc) but looking forward to the next build.
Sent from my GT-P5110 using Tapatalk 4
Please p31xx this rom excels !!
I am trying to flash it on the p5100, but I already fail at the beginning in cwm.
I also use the blackhawk Kernel with dual boot option.
This is the error I get in cwm.
@sevenup30 Any idea what's wrong?
Same problem with my 5100.
Shepguessed said:
So excited for this, thanks...but...i am having major issues, no root, performance settings crash, and it seems like a lot of settings are missing, (nav bar, quick tiles, notification, etc) but looking forward to the next build.
Sent from my GT-P5110 using Tapatalk 4
Click to expand...
Click to collapse
there is an issue with root, flash supersu.zip from cwm
And yes there is lack of customization the rom is less than 1 week old and there is no official build yet.
AA1973 said:
I am trying to flash it on the p5100, but I already fail at the beginning in cwm.
I also use the blackhawk Kernel with dual boot option.
This is the error I get in cwm.
@sevenup30 Any idea what's wrong?
Click to expand...
Click to collapse
rk73 said:
Same problem with my 5100.
Click to expand...
Click to collapse
Ok i'm doing an other build and uploading again.
Thanks a lot :thumbup:
http://www.mediafire.com/?9t7u6qifcgvxj5w
P5100 build. It should be fixed now !!!
Cool stuff. Thanks a lot.
Downloading (oh, How I those posts). Will report here. Later.
Anything special to be looked at?
Root, Wifi, data etc?
Tested P5100 build. Works good but no mobile data. Unknown baseband in About device screen. Probably no modem files in the firmware.
Link to bootanimation
For Tab You can try 800x800
http://forum.xda-developers.com/showthread.php?p=46562786#post46562786
AA1973 said:
Cool stuff. Thanks a lot.
Downloading (oh, How I those posts). Will report here. Later.
Anything special to be looked at?
Root, Wifi, data etc?
Click to expand...
Click to collapse
Root still need to be flashed via CWM with supersu.zip
theOFFSPRING said:
Tested P5100 build. Works good but no mobile data. Unknown baseband in About device screen. Probably no modem files in the firmware.
Click to expand...
Click to collapse
Mmmh ok, maybe something not include i'll try to understand why, but this will be hard since i dont have p5100, it would be better that a owner of p5100 build this,
device tree is available at https://github.com/sevenup30
Amazing Rom!
Thanks Developer
I have tested it on P5110 and so far this is my favourite rom of the year
Keep up the good work!
Root Issue
Here is the latest superuser.zip for those having root issues: https://plus.google.com/110558071969009568835/posts/bpXwTcHafo1
:angel:
theOFFSPRING said:
Tested P5100 build. Works good but no mobile data. Unknown baseband in About device screen. Probably no modem files in the firmware.
Click to expand...
Click to collapse
Bluetooth also not working
---------- Post added at 05:06 PM ---------- Previous post was at 04:59 PM ----------
Bluetooth is not working due to the kernel
It start working when the next kernel is flashed
Is any one developing the rom for p5100
i'd like someone to maintain the p5100 rom, I'm doing it but can't test anything :s
sevenup30 said:
i'd like someone to maintain the p5100 rom, I'm doing it but can't test anything :s
Click to expand...
Click to collapse
Hey made one build for the P5100
made with the same build
Fixed:-
3G
Bluetooth (Bluetooth sharing not working try to fix)
Uploading after fixing
Great. Loveto try it

[ROM][BETA][TW][30.01.15][LOLLIPOP][N900] SpiderRom V1.1

Android Lollipop for Galaxy Note 3 (SM-N900)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I'm working on a flashable .zip of the latest release (Android 5.0 Lollipop) It only supports the EXYNOS Version of the phone (SM-N900).
First I want to make a rom, which is totally stock. Just rooted and busyboxed. Later releases will have some optimisations. Upload will take some time, just wait patient
I personally don't own that phone, so I'm very glad, when all of you can report me things and stuff, that everything works etc. Thank you! :fingers-crossed:
First of all, I'm not responsible for damaged phones! Also, if you flash this, you will woid your warranty! So attention! Knox will display 0x1!
Features:
-Stock Kernel
-Prerooted (I hope root access works, because root problems on android lollipop....)
-Latest Busybox
-Latest SuperSU
-Removed Knox
-Latest Samsung Base OA6
-ODEX Rom
-Init.d support
-Zipaligned
-Modem Included
-Build.prop Tweaks for better performance and battery life
-No Bootanimation/Sound
-Debloated
SpiderRom V1.1 Download Link on Mega
Bugs:
None so far
Instructions:
0. MAKE SURE TO HAVE A LOLLIPOP BOOTLOADER for example from here: Dr.Ketans Bootloader
1. Have a working recovery (latest).
2. Make a backup in your recovery!
3. Copy the file to your external sd card
4. Make a factory reset
5. Install the rom
6. Reboot!
Thanks/Credits:
[email protected] for his great ArchiKitchen
[email protected] for the root!
-Samsung for the firmware
-Mega for mirroring
XDA:DevDB Information
Stock Based Rom Note 3, ROM for the Samsung Galaxy Note 3
Contributors
Tkkg1994
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.4.x
ROM Firmware Required: SM-N900
Based On: Stock
Version Information
Status: Beta
Current Beta Version: 1.1
Beta Release Date: 2015-01-30
Created 2015-01-30
Last Updated 2015-02-09
Reserved
Changelog:
SpiderRom V1.0:
-Initial Release!
SpiderRom V1.0 Beta 2:
-Debloated a little bit
-SD Write fix
-Some changes in Update-Script
Reserved
Deleted, thread is already moved.
Thanks
---------- Post added at 05:04 PM ---------- Previous post was at 05:02 PM ----------
This thread has to be in exynos android development section not here. Say to the MOD bro to move this thread.
Moved to Exynos forum
Uploading....
Upload takes about 2 hours. Can't wait I want to know if everything works!
Beta V1.0 is uploaded. Please guys, give me some good informations that it works! Maybe we will have problems with root, but let's see!
Can someone report something ^^
Deleted
Oh sorry, missed this one line in OP
Androidwizzard said:
Deleted
Oh sorry, missed this one line in OP
Click to expand...
Click to collapse
Excatly, based on the latest built, but you have to try it... I don't have your phone!
Tkkg1994 said:
Excatly, based on the latest built, but you have to try it... I don't have your phone!
Click to expand...
Click to collapse
Which one do you have? I have a Note 2
Androidwizzard said:
Which one do you have? I have a Note 2
Click to expand...
Click to collapse
Galaxy S4 I also can't test it, and I think you also not.. :/
excellent, thanks! but cant install i get error status 6 in recovery when install
clau_la2 said:
excellent, thanks! but cant install i get error status 6 in recovery when install
Click to expand...
Click to collapse
Question, what was shown?
Installing SpiderRom
Mounting Partitions
Installing System
Setting Symlinks and so on
What did it display you? Till when the installation went well?
Tkkg1994 said:
Galaxy S4 I also can't test it, and I think you also not.. :/
Click to expand...
Click to collapse
Please check pm :good:
Tkkg1994 said:
Question, what was shown?
Installing SpiderRom
Mounting Partitions
Installing System
Setting Symlinks and so on
What did it display you? Till when the installation went well?
Click to expand...
Click to collapse
opening update package...
error in /extsdcard/spider.....zip
...
(status 6)
installation aborted..
clau_la2 said:
opening update package...
error in /extsdcard/spider.....zip
...
(status 6)
installation aborted..
Click to expand...
Click to collapse
Currently uploading with some changes!!
clau_la2 said:
opening update package...
error in /extsdcard/spider.....zip
...
(status 6)
installation aborted..
Click to expand...
Click to collapse
New build online, want to test again?
That's the problem, when I don't have your phone...
welcome to Exynos
where screenshots?
rockadz9 said:
welcome to Exynos
where screenshots?
Click to expand...
Click to collapse
Tkkg1994 said:
That's the problem, when I don't have your phone...
Click to expand...
Click to collapse
Read my post above you!

Rick's ROM OE2-OC3 -5.0.2 Lollipop-06/14/15-

Here is Rick's ROM for the VZW S6. Thanks @scrosler for the ROM base and @Gunthermic for the mods. This ROM is for the VZW S6 ONLY.
Features​
Debloated (See post 3 for what apps are included)
Root thanks @idler1984 and @Chainfire
Init.D Support
BusyBox
Removed Tether Checks thanks @Gunthermic
Removed Verizon CD installer thanks @Gunthermic
Changed Lockscreen and Workspace wallpapers
FX Root File Explorer
Added Ringtones and Notification sounds​
Install Instructions​
Download and install with Flashfire.
1: Open flashfire, select wipe and Flash Zip or OTA.
2: Select the ROM and rearrange the flash order so that wipe is before the ROM flash.
3: If you are flashing a ROM with different firmware after flashfire reboots hold down the home, volume down and power keys to enter download mode.
4: Using Odin flash the proper firmware and reboot.
For more detailed instructions go here.
Changelog​
Added Remove CD installer to OE2 Build 1.5 Thanks @Gunthermic for the Mod again
Added OE2 build 1, same mods minus the removed CD installer.
Changed lockscreen for a tribute to my late dog Raven
XDA:DevDB Information
Rick's ROM, ROM for the Verizon Samsung Galaxy S6
Contributors
Misterxtc
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.10.x
Version Information
Status: Testing
Created 2015-05-21
Last Updated 2015-06-14
Download Ricks ROM OE2 Build 1.5 Here
MD5:7b7ca9ff9a8755ea8459abf36529f522​
Download OE2 Firmware here.​MD5: cf512cd298ddd364d349e4507174bdae
Download Ricks ROM OC3 V1 Here
MD5: 6bb9efd27264517e8ead9fdce3751558​
Download OC3 Firmware here.​MD5: b038a821549430d7e43f18ab3d5cdc12​
ScreenShots
What you see is what you get, no more and no less.​
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
​
Nice good to see another rom floating around
Sent from my risiculously powered S6 using Tapatalk
Xposed work?
Does xposed work with this rom?
tylerjjoseph said:
Does xposed work with this rom?
Click to expand...
Click to collapse
I couldn't tell you. I never use xposed. The last I heard xposed needs to be fixed for lollipop.
Misterxtc said:
Here is Rick's ROM for the VZW S6. Thanks @scrosler for the ROM base and @Gunthermic for the mods. ​
Click to expand...
Click to collapse
There we go! Teamwork!
Good job man!
Xposed does not work with 64 bit processors currently, but there is a workaround for lollipop which doesn't help us. If I'm incorrect on any of this please let me know.
Great to see another rom! I just want to have someone disable the safe headphone warning stuff...please?
Sent from my SM-G920V using Tapatalk
twiz0r said:
Xposed does not work with 64 bit processors currently, but there is a workaround for lollipop which doesn't help us. If I'm incorrect on any of this please let me know.
Click to expand...
Click to collapse
Per my understanding you are correct. Not to mention it would need to be deodexed which isn't mentioned so I'll assume its not.
Thanks for the rom @Misterxtc!
twiz0r said:
Xposed does not work with 64 bit processors currently, but there is a workaround for lollipop which doesn't help us. If I'm incorrect on any of this please let me know.
Great to see another rom! I just want to have someone disable the safe headphone warning stuff...please?
Sent from my SM-G920V using Tapatalk
Click to expand...
Click to collapse
I'll be happy to do it if I can find instructions for the mod. Things are going to be a bit crazy around here for a few because I'm picking up a new puppy today to welcome in our home so I'm not sure how soon I can get to this. Most likely I won't have much time during the day as I did in the past. I'm with you 100% on disabling the volume warning.
Gonna ask a noob question.....
If i flash this with flash fire, will it trip knox?
ou814us2 said:
Gonna ask a noob question.....
If i flash this with flash fire, will it trip knox?
Click to expand...
Click to collapse
No - it's my understanding that you would have to do something to the bootloader to trip knox
thestinkinggenius said:
No - it's my understanding that you would have to do something to the bootloader to trip knox
Click to expand...
Click to collapse
Gotcha...
I am fairly experienced with flashing roms, but i am new to Verizon and new to flash fire. I came from T-mobile/HTC and never had to use flash fire.
Misterxtc said:
I'll be happy to do it if I can find instructions for the mod. Things are going to be a bit crazy around here for a few because I'm picking up a new puppy today to welcome in our home so I'm not sure how soon I can get to this. Most likely I won't have much time during the day as I did in the past. I'm with you 100% on disabling the volume warning.
Click to expand...
Click to collapse
This thread is the most recent resource I'm aware of. Again, the 64x is the current hangup though so some hurdles need yet to be cleared. But there is still useful info in there as it pertains to 5.x Xposed so maybe you'll be the guy to make it happen. By all means no hurry, we're all on the front end of this thing right now anyway.
Also, congrats on the new pup. I had a rough time much like yourself recently re: the long time family pet. Glad to hear things are back on the upswing. :good:
Hello!
Does this rom have a Brazilian Portuguese language?
When you guys say that the rom tripped Knox, means that the fingerprint scanner should work or not?
The Fingerprint Scanner still working on this rom?
Thanks for all and sorry about my simple doubts! I'm newbie...
BRM_VMS said:
Hello!
Does this rom have a Brazilian Portuguese language?
When you guys say that the rom tripped Knox, means that the fingerprint scanner should work or not?
The Fingerprint Scanner still working on this rom?
Thanks for all and sorry about my simple doubts! I'm newbie...
Click to expand...
Click to collapse
Attached is a screenshots of the languages, also fingerprint scanner works well.
bkeaver said:
Attached is a screenshots of the languages, also fingerprint scanner works well.
View attachment 3328135
Click to expand...
Click to collapse
Thank you!:good:
Can you flash this ROM on the s6 edge?
gsi300 said:
Can you flash this ROM on the s6 edge?
Click to expand...
Click to collapse
No
Can I flash this over clean rom, or is it best to odin flash stock re root then flash fire ricks rom? Thanks
Sent from my SM-G920V

Poseidon Kernel v1.1

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hello Everyone, im pleased to announce my kernel for the N920T variant, the kernel comes in 2 types, either pre rooted with magisk or without root and without any encryptions so you can flash superSU if you want to.
Code:
* Your warranty will be voided !
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
the kernel is built from latest sources by samsung and will soon be updated with more features
The kernel is both enforcing and permissive, to change it you can use the app Selinux Mode Changer included with the installation of the kernels
Installation:
Reboot to TWRP
Make a backup of existing boot partition just incase
Flash the zip file which you've downloaded and enjoy!
Kernel Features:
Compiled with usb OTG Support
Kernel can be set as Permissive/Enforcing using the provided app
Removed SecurityLogAgent, no more nagging
Fix SecureStorage, no more forgotten passwords after reboot
Samsung Rooting Restrictions Removed
For those who are new to Magisk, you can read all about it HERE
If you'd like to support my work, click here
Check the Downloads tab above or 2nd Post for download links
XDA:DevDB Information
Poseidon Kernel, Kernel for the T-Mobile Samsung Galaxy Note5
Contributors
Ather
Source Code: https://github.com/sayedather/Poseidon-Kernel-SM-N920T
Version Information
Status: Stable
Current Stable Version: 1.1
Stable Release Date: 2017-07-18
Created 2017-04-25
Last Updated 2017-07-18
Changelog for v1.1 18th July 2017
based on N920TUVU4EQE1
compiled with linaro-6.3.1
selinux permissive
wifi drivers improved
bluetooth works
How to:
Copy zip to sdcard, make backup of existing kernel and then flash the zip
Note: You'll need to flash magisk or supersu after you flash the kernel since there is no root included!
Download:
v1.1 - https://www.androidfilehost.com/?fid=889764386195916844
This kernel work on 920w8 or not ?
ebusuhejbi said:
This kernel work on 920w8 or not ?
Click to expand...
Click to collapse
Yes it works, has been tested on a 920W8 by my friend
Waiting to test it
@ebusuhejbi Links are already posted, click the download tab
I am unable to root using Magisk. See my screenshots below
http://cloud.tapatalk.com/s/58ffcb9d92b1d/Screenshot_20170425-181927.png?
http://cloud.tapatalk.com/s/58ffcba63a7bf/Screenshot_20170425-181913.png?
Sent from my SM-N920T using Tapatalk
babaroye said:
I am unable to root using Magisk. See my screenshots below
View attachment 4126569http://cloud.tapatalk.com/s/58ffcb9d92b1d/Screenshot_20170425-181927.png?
http://cloud.tapatalk.com/s/58ffcba63a7bf/Screenshot_20170425-181913.png?
Sent from my SM-N920T using Tapatalk
Click to expand...
Click to collapse
Which kernel did you flash?
Ather said:
Which kernel did you flash?
Click to expand...
Click to collapse
I flashed [PreRooted]-PoseidonKernel-N920T-v1.0.zip
Sent from my SM-N920T using Tapatalk
babaroye said:
I flashed [PreRooted]-PoseidonKernel-N920T-v1.0.zip
Sent from my SM-N920T using Tapatalk
Click to expand...
Click to collapse
i've reuploaded the download for the prerooted version, you can either redownload the zip file and flash it or flash this
Ather said:
@ebusuhejbi Links are already posted, click the download tab
Click to expand...
Click to collapse
I can't see any download link..please reupload it
Where is the link?
---------- Post added at 11:39 PM ---------- Previous post was at 11:37 PM ----------
My device is G928T, can use this kernel?
ebusuhejbi said:
I can't see any download link..please reupload it
Click to expand...
Click to collapse
18738786572 said:
Where is the link?
Click to expand...
Click to collapse
My device is G928T, can use this kernel
18738786572 said:
My device is G928T, can use this kernel?
Click to expand...
Click to collapse
I doubt it'll work, i only have tested this on N920T and N920w8
Flashed the kernel but i have problem with Bluetooth I can't turn on...i am on project l rom
---------- Post added at 12:12 AM ---------- Previous post was at 12:10 AM ----------
ebusuhejbi said:
Flashed the kernel but i have problem with Bluetooth I can't turn on...i am on project l rom
Click to expand...
Click to collapse
With stock kernel is working
Ather said:
i've reuploaded the download for the prerooted version, you can either redownload the zip file and flash it or flash this
Click to expand...
Click to collapse
Thank you. Root worked
Do you know why viper4android is not working? Also did they remove the VoLTE option completely?
Sent from my SM-N920T using Tapatalk
babaroye said:
Thank you. Root worked
Do you know why viper4android is not working? Also did they remove the VoLTE option completely?View attachment 4126620
Sent from my SM-N920T using Tapatalk
Click to expand...
Click to collapse
To install viper4android, use the provided app to change the kernel to permissive it'll install fine, regarding the volte i cant test it because my carrier doesn't support it yet, i use the tmobile variant overseas
ebusuhejbi said:
Flashed the kernel but i have problem with Bluetooth I can't turn on...i am on project l rom
---------- Post added at 12:12 AM ---------- Previous post was at 12:10 AM ----------
With stock kernel is working
Click to expand...
Click to collapse
On N920T it works fine, I'll ask my friend to test on N920w8 and report back
Ather said:
To install viper4android, use the provided app to change the kernel to permissive it'll install fine, regarding the volte i cant test it because my carrier doesn't support it yet, i use the tmobile variant overseas
Click to expand...
Click to collapse
Ok so i changed to permissive. Viper is installed but the drivers wont install.
Sent from my SM-N920T using Tapatalk

[ROM][N][SM-G903F] Mitigation OS

Mitigation OS (SM-G903F)
Mitigation OS is a newer version of Stock ROM, achieving a cleaner and faster experience.
Features
As from the name "Mitigation", this ROM has a packed bunch of new features such as:
-Providing a newer Android version (Android 7.0)
-Performance improvements
-Stability Fixes
-New customization options
-Little to no Standby battery drain
And much more!
Bugs
Some certain bugs which will be fixed in the near future are of:
-Full Charge rises to 97%.
-S-Health app.
-Some other minor bugs.
Installation Instructions
Installing this ROM is the hardest part, but once it is done. It'll be worth it! Here's how:
-Download both .zip files provided below
-Grab the latest version of the Odin application
-Extract the Odin application in any directory
-Open Odin and open the Options tab
-Place MitigationOS-N-s5neoltexx.tar (Firmware) in the AP section, enter Download mode (PWR + HOME + V.L. DWN) and flash it
-Once ready, keep holding the power button, volume down and the home button to re-enter Download mode and flash any recovery at your own will
-Wipe Dalvik Cache, Cache, System and data
-Flash MitigationOS-N.zip via your recovery
-Reboot to the System partition and enjoy!
Downloads
Firmware
ROM
Screenshots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
XDA:DevDB Information
Mitigation OS N, ROM for the Samsung Galaxy S5 Neo
Contributors
PixelBoot
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 4.x
Version Information
Status: Stable
Created 2018-09-07
Last Updated 2019-06-24
My settings look like this, what should i do? Or will it be fixed in next updates?
Barebonet said:
My settings look like this, what should i do? Or will it be fixed in next updates?
Click to expand...
Click to collapse
It is normal to end up with that result.
It was fixed from the start but a step you skipped was of flashing the stock image before.
This is because the Canadian ROM has unorganized settings.
This is fixed by flashing TWRP, wiping everything and starting from the steps provided.
Sorry for not making this point clear, but I hope I helped you!
PixelBoot said:
It is normal to end up with that result.
It was fixed from the start but a step you skipped was of flashing the stock image before.
This is because the Canadian ROM has unorganized settings.
This is fixed by flashing TWRP, wiping everything and starting from the steps provided.
Sorry for not making this point clear, but I hope I helped you!
Click to expand...
Click to collapse
Ok, thank you!
What's better than zapryanov?
Pls Enable volte
KomitaMKD said:
What's better than zapryanov?
Click to expand...
Click to collapse
I find Mitigation more suiting for me in the category of being clean and pure for a stock nougat experience, but if you liked the themeing used, go ahead! It depends on your liking.
mahaprabhu said:
Pls Enable volte
Click to expand...
Click to collapse
Is it not enabled? Sorry to ask you this, as I don't have VoLTE in my country.
PixelBoot said:
Is it not enabled? Sorry to ask you this, as I don't have VoLTE in my country.
Click to expand...
Click to collapse
In zappronov rom VOLTE is working with jio sim......pls fix in mitigation os
mahaprabhu said:
In zappronov rom VOLTE is working with jio sim......pls fix in mitigation os
Click to expand...
Click to collapse
Thank's for the notice!
Once I get it working, I will definitely inform you.
PixelBoot said:
Thank's for the notice!
Once I get it working, I will definitely inform you.
Click to expand...
Click to collapse
Thanks.....pls update kernel...with working volte....
thank you bro :good::good::good:
Thats not a rom. It is the canadian tar with boot and system files in it. Otherways it will not work on the g903f. Because of missing home csc from the tar the settings will be disorganized. There is no skipped steps or something you did wrong. We have used that tar files since Stricted made one for us because I personally asked him for because i didnt know how to remove other files from the tar. It is not a rom it is just a g903w firmware file!
AnonymousAL said:
Thats not a rom. It is the canadian tar with boot and system files in it. Otherways it will not work on the g903f. Because of missing home csc from the tar the settings will be disorganized. There is no skipped steps or something you did wrong. We have used that tar files since Stricted made one for us because I personally asked him for because i didnt know how to remove other files from the tar. It is not a rom it is just a g903w firmware file!
Click to expand...
Click to collapse
I am currently uploading the full zip of this firmware. Sorry for misleading you.
Is this Rom in Multilingual (German) ???
Goblin171 said:
Is this Rom in Multilingual (German) ???
Click to expand...
Click to collapse
Nah
Can you make this rom in multilingual please
Goblin171 said:
Can you make this rom in multilingual please
Click to expand...
Click to collapse
You may set it up in English and change the language once done in the settings.
could you create a fix for the SIM to work on the g903m / ds model in latin america? please answer
RafaelS5Neo said:
could you create a fix for the SIM to work on the g903m / ds model in latin america? please answer
Click to expand...
Click to collapse
If I find a way how... Definitely!
Just give me some time as I am working on RR.

Categories

Resources