I just get my new gp2 yesterday and immediately update it to lollipop. But now there's no option where i can choose USB mode while the phone is connected to pc (it was only slow charging).
On kitkat there are such notification
- Slow charging ...
- USB debugging ...
- Charging, touch for more option
But now on lollipop there's no more "touch for more option" notification, it just slow charging. The problem is I cant transfer file between gp2 and pc without MTP mode.
Heres what i have done so far :
- I tested the original USB cable with other android device and it's work fine (android 6.0)
- Tested gp2 with other USB cable, still the same problem occur
- Tested on other PC
- The gp2 showed up on device manager
- USB tethering works
- LGMobile Support Tool detected the phone but not LG PC Suite, because LG PC suite need the device on MTP mode.
Now im downloading the stock rom d838 20A, going back to kitkat.
Has anyone facing the similiar problem after lollipop??
SOLVED....
Apperently u just need to FACTORY RESET the phone!!
omg, i think it was a bug from OTA update...
Related
hello
i have nexus s phones ( I9023 GRI54) with everything stock yesterday when i was trying to install it's drivers i got a sudden stop in the usb function of the device , this stop was like this
*device doesn't show that the device is connected to the pc (in the notification area "USB CONNECTED OR USB DEBUGGING ON)
*not connected even in boot loader mode
*Odin 1.82 couldn't find the device at all.
NOTE: In all cases the PC (win 7) shows USB not responding and unknown device.
IMPORTANT : When i tried to connect my brothers nexus s (I9020 GRH78)to my PC everything was ok (adb , bootloader , mass storage modes.
PLEASE HELP
THANK YOU​
Hi,
I've had some problems with my N8010 recently. I reset it and am now finding that the laptop won't recognise USB (comes up as malfunctioned).
It's been rooted.
I can enter ODIN by pressing home and power up and can also access download / install customer OS by pressing home and power down (although it just sticks on "downloading").
Thinking it might be the USB (although the tablet was being charged when it was plugged in) I've tried a few but all have the same problem.
I've tried re-installing drivers via device manager, have tried the USB cable connection error in Kies (that goes very quickly through it's analysis and doesn't fix it).
Given I've done a complete re-set there are only the basic apps on the device (other than SuperSU - although I've done a full unroot).
Any other thoughts as I'm stuck and can't fix the issues.?
Settings:
GT-N8013 (although it is GT-N8010)
Android 4.4.2
Kernel - 3.0.101 Boeffla Kernal 3.0-beta6
Build - Gnabo.Rom.v8
Can anyone help?
Standard reply to usb problems .
Search Google XDA usb errors not connecting .
USB port dirty / pins bent .
USB cable replace .
Install Samsung USB drivers
USB not connected to a mainboard usb port .
Try a different PC .
Currently using g play mini.My phone's build number is B160.Android kitkat 4.4.2
Recently cannot connect my phone as usb storage.After connecting to pc with usb cable phone only charges.USB debugging is not showing.(usb debugging is enabled from developer option).what to do?
Kayes360 said:
Currently using g play mini.My phone's build number is B160.Android kitkat 4.4.2
Recently cannot connect my phone as usb storage.After connecting to pc with usb cable phone only charges.USB debugging is not showing.(usb debugging is enabled from developer option).what to do?
Click to expand...
Click to collapse
I have had same problem. But the reason for it happenning was that there was something wrong with my pc usb ports(though the problems only happens when I have phone connected to it). Restarting pc usually fixes it.
No idea will this help.
Hello
ir i've tried restarting the pc couple of times but no result and also tested on another pc and usb cables.
thinking to visiting customer care centre
did you try to factory reset
Title should say USB my fat fingers ! phone is completely stock no attempts to root. Enabled developer options fine. toggle the USB debugging switch. Get the Allow USB debugging? pop up. Click ok. Don't get any kind of debugging enabled notification. Restore default settings button is shown at the bottom of screen - i ignore this. Hit home or settings menu then go back to Developer options and the USB debugging switch is toggled off again. I tried restarting, developer options has stayed visible in settings but still can't get USB debugging to stick. PLEASE any suggestions what i'm missing?? Thanks
I also have the same problem with my mate 9. Allow usb debugging setting automatically toggles off as soon as I leave the settings menu.
Hi boys..
reasonable for this behaviour are the developer mode switches 1.) "Allow ADB debugging in charge only mode" and 2.) "Always prompt when connecting to USB"!!!
If switch 1.) is not set to "on", and switch 2.) is not set to "off", the switch "debugging allowed" would be cancelled every time you leave this menu!
So it does, what it have to do! Cancelling debug mode if phone would be connected to any other device without transferring data (if only charged). Easy, or not?
(see signature 1+2!)
hi man
i have a problem
my phone is huawei p40 pro
how to fix usb c port of the phone not function only charging , no fastboot ,no mtp ,no usb debugging ,no hdb
this is what i did
at the first usb c works fine
untill i did downgraded from version 11.0.0.190(c185R3) to version EMUI 11.0.0.153(c185R3)
i used hisuite proxy method and i got firmwares from https://www.firmfinder.ml/
after phone bootup 11.0.0.153 firmware , it seems usb c port disabled and just charging works
even i couldn't toggle usb debugging and change usb mode to MTP
after that i again downgraded to 10.1.0.114(c185R3) and nothing change . still usb c disabled
so i couldn't connect my phone to usb , and even i couldn't use usb otg
so i decided to use my phone itself's online update. i run updating first to 10.1.0.183 and nothing changed
again updated with itself's online update. update to 11.0.0.153 and still nothing changed
finaly the last firmware update. i updated with itself's online update to 11.0.0.195 . and see usb c work , even usb otg , and usb debugging and MTP , all works perfect
can you explain what happend on my phone and why usb don't work when i use hisuite proxy method ?
i did it again and again , all same results
It seems that the official update with the phone itself ( without pc ) is the only way to solve the problem
today some one tells me another way ,
can anyone test this way?
firlando said:
Hi there,
Huawei July Patch 2021 close all posibility to downgrade the FIRMWARE, it can be done with Hisuite Proxy but you have to choose the correct FIRMWARE and suitable to your Phone region. Once it done you can fix the "DISABLE USB" by doing OTA update to latest FIRMWARE to make it works.
When you choose the wrong cust/preload/mainFW your phone will be locked with that current FIRMWARE with "DISABLE USB" forever, you can solve this by searching the correct FIRMWARE and flash it using NMCARD the FIRMWARE should be a Higher than your Current FIRMWARE INSTALLED. after all done you can get OTA update and do OTA Update to latest FIRMWARE to make USB WORK.
Please be NOTED : Testpoin Not Working with latest July 2021 Firmware Patch so Huawei Block any downgrade posibility
I found 2 Brand USB Thumbdrive which is work with "DISABLE USB" you can do such Dload or restore Lzplay to instal GMS before update with OTA UPDATE. Here I attached the USB Thumb Drive.
Click to expand...
Click to collapse
Phone doesnt recognise usb.
Please i need help fast. Im going away tomorrow and i need my phone. I had gms successfully installed earlier today, but i accidentally deleted something and it stopped working, so i factory reset multiple times, even upgraded to emui 11 but...
forum.xda-developers.com
Hi,
I bought Samsung Galaxy A5 (2016), it was running on lollipop as factory, I updated it to marshmallow, then after ca 4 months, updated to nougat.
My phone (that is not rooted) could connnecting to PC (Windows 7), could connecting to other device or to a mouse via OTG cable.
The problem is after updating to nougat, no mouse or other device supported by connecting to it via OTG, and the worst is I can't connect it to PC, bcz I want to downgrade it back to marshmallow.
I use the original usb cable, when I connect it to PC, it shows just charging signal and no notification to check MTP or such things.
I tried to turn on USB debugging, and other usb cable, no successs!
Other device can connect successfully to pc via the same cable and to the same PC.
I could bear everything (no OTG and etc) but connecting to PC is very important, specially since short time WIFI disconnects automatically from device, I tried also many things to fix it but also no luck also after wipe caching data and reset factory, the problem remains also in safe mode.
So many bla bla, sry but any help to flash firmware to SM-A510F (not rooted)...
I think, this would repair everything when I downgrade to marshmallow but without PC, how does it function?!!