Database Info

Developers - Merging Your Working Device

If you are a developer, and wish to have a device merged into Omni, here is the current "temporary" process to use. There are 2 ways to do this - make your tree available on github (or a similar service), or request a new git tree be created, and submit it to gerrit.
1) Get your device working. There's plenty of help available in #omnirom on Freenode if you need assistance. An AOSP device tree is probably the best place to get started.
2) Set up your device to use the OmniROM "custom" build type, rather than full/aosp. More information will follow on this step - check device/samsung/manta or device/lge/mako for an example.
3) Make your device tree available on github or a similar git service. Please retain authorship of an original tree (if you fork it from AOSP or another custom ROM)
4) Come to #omni on Freenode, and have a chat to one of the core developers (they are listed at the top of the user list) - they will be able to help you get your device merged
Please note, in order to add a new device, we will require a maintainer on an ongoing basis for it, to ensure someone is able to investigate bugs that users report on a device. Without this, we unfortunately cannot enable nightly builds for a device.

will a cm kernel tree work for the most part with just a few changes?

azoller1 said:
will a cm kernel tree work for the most part with just a few changes?
Click to expand...
Click to collapse
yes - of course it must be 10.2 (4.3)
most likly it will work even unchanged

pulser_g2 said:
3) Make your device tree available on github or a similar git service. Please retain authorship of an original tree (if you fork it from AOSP or another custom ROM)
Click to expand...
Click to collapse
Along these lines, do NOT remove copyright attributions of a changed file. You may ADD copyrights to a header, but do NOT remove anything.
maxwen said:
yes - of course it must be 10.2 (4.3)
most likly it will work even unchanged
Click to expand...
Click to collapse
Most likely kernel change will be that reverting out that MDP sync point mess used by CM's AOSP+CAF frankendisplay. Can't link to it from my current location.

I have everything device sided transformed to Omni (m7ul,m7-common,and msm8960) and have exactly this problem now. Builds fine but Stucks after a few secs booting and hard reboots. Already looked into kmsg with maxwen but now we need to find what's causing it...
Reverted some stuff (MDP) kernel sided but haven't succeeded so far. Would be appreciated if u point us there when u back on a pc
noNeedForAsig

TF300T
OK here goes..
For the Asus Transformer TF300T the kernel forked from the CyanogenMod github:
https://github.com/scanno/android_kernel_asus_tf300t/tree/android-4.3
And the device tree, modified to get OmniROM to finish the build and get a bootable result:
https://github.com/scanno/android_device_asus_tf300t/tree/android-4.3
Hopefully it will be added to the OmniROM github.

n3ocort3x said:
I have everything device sided transformed to Omni (m7ul,m7-common,and msm8960) and have exactly this problem now. Builds fine but Stucks after a few secs booting and hard reboots. Already looked into kmsg with maxwen but now we need to find what's causing it...
Reverted some stuff (MDP) kernel sided but haven't succeeded so far. Would be appreciated if u point us there when u back on a pc
noNeedForAsig
Click to expand...
Click to collapse
I'm thinking for m7ul it would be https://github.com/CyanogenMod/android_kernel_htc_m7/commit/f2efb02581110747711c8b17f31f38fc3ed5dd1a
Don't want to hijack the thread though, so we can probably discuss this elsewhere

@Grarak Maybe you should post your edited device tree for Omni Rom =)
Sent From my i9500 With ☆★Crash Rom★☆

AL_IRAQI said:
@Grarak Maybe you should post your edited device tree for Omni Rom =)
Sent From my i9500 With ☆★Crash Rom★☆
Click to expand...
Click to collapse
Already on my github
https://github.com/Grarak/android_device_samsung_i9500
kernel tree
https://github.com/Grarak/android_kernel_samsung_exynos5410
proprietary
https://github.com/Grarak/proprietary_vendor_samsung
exynos 5410 repos:
https://github.com/intervigilium/android_hardware_samsung_slsi_exynos5410
https://github.com/intervigilium/android_hardware_samsung_slsi_exynos
https://github.com/intervigilium/android_hardware_samsung_slsi_exynos5
https://github.com/intervigilium/android_hardware_samsung_slsi_exynos5-insignal
https://github.com/intervigilium/android_hardware_samsung_slsi_openmax
pretty much ^^

I'd like to maintain for l900 and i605 (Sprint and Verizon Galaxy Note 2).
device trees
https://github.com/omnirom-slickrick/android_device_samsung_l900 (sprint tree)
https://github.com/omnirom-slickrick/android_device_samsung_i605 (vzw tree)
https://github.com/omnirom-slickrick/android_device_samsung_t0lte (note 2 common tree)
https://github.com/omnirom-slickrick/android_device_samsung_smdk4412-common (same as tree on omnirom github but actually more updated and device settings added back)
kernel
https://github.com/omnirom-slickrick/android_kernel_samsung_smdk4412 (just have needed device settings commits added back in)

thracky said:
I'm thinking for m7ul it would be https://github.com/CyanogenMod/android_kernel_htc_m7/commit/f2efb02581110747711c8b17f31f38fc3ed5dd1a
Don't want to hijack the thread though, so we can probably discuss this elsewhere
Click to expand...
Click to collapse
we already making progress but it needs more work to be done.. at least we are now in system with working wifi, and display but modem doesent work.. something for tomorrow, and i dont want to hijack this thread too sorry if my question was in the wrong section but i thought i mention it because of the post above mine. nevermind i cann offer to maintain m7ul as already discussed with maxwen and oin IRC but a lot of work needs to be done:
here are my sources, device trees are usable but kernel needs more work as said above:
device trees:
https://github.com/n3ocort3x/android_device_htc_m7ul
https://github.com/n3ocort3x/android_device_htc_m7-common
https://github.com/n3ocort3x/android_device_htc_msm8960-common
kernel: its a modified one but its no problem to bring it back to stock features and will push as soon asap the modem stuff is sorted out
https://github.com/n3ocort3x/android_kernel_htc_m7
EDIT modem fixed, only BT left

@sykomaniac , look at first post and become a maintainer

pulser_g2 said:
If you are a developer, and wish to have a device merged into Omni, here is the current "temporary" process to use. There are 2 ways to do this - make your tree available on github (or a similar service), or request a new git tree be created, and submit it to gerrit.
1) Get your device working. There's plenty of help available in #omnirom on Freenode if you need assistance. An AOSP device tree is probably the best place to get started.
2) Set up your device to use the OmniROM "custom" build type, rather than full/aosp. More information will follow on this step - check device/samsung/manta or device/lge/mako for an example.
3) Make your device tree available on github or a similar git service. Please retain authorship of an original tree (if you fork it from AOSP or another custom ROM)
4) Post a link here to the device tree (and kernel repository) for review, and tell us what device it is (give model numbers and board names and as many details as possible )
Click to expand...
Click to collapse
We have quite a few things that aren't working like bluetooth, camera is buggy, H/W vsync, gps, and fm radio.
https://github.com/SeannyM/android_device_samsung_kylessopen
https://github.com/SeannyM/ba2x-kernel
gt-s7560m with quadband gsm and 850/1900/2100 WCDMA/UTMS
We have a MSM7227a cpu armv7 clocked at 1008mhz stock.
645mb of usable ram
4gb of storage with 1.7 usable
233 dpi 800x480 4inch screen
Adreno 200 enhanced
5mp camera 1.3 front facing
hopefully we can get something official
single sim

Gtab2 10.1 Wifi & 3G (p5110 & p5100)
There you have my device tree for omni
p5110 :
https://github.com/sevenup30/android_device_samsung_p5110
p5100:
https://github.com/sevenup30/android_device_samsung_p5100
omap4-common (had to edit it cuz of duplicate libion entry):
https://github.com/sevenup30/android_device_samsung_omap4-common
other dependencies required from CM & Themuppets
kernel :
https://github.com/CyanogenMod/android_kernel_samsung_espresso10
samsung proprietary:
https://github.com/TheMuppets/proprietary_vendor_samsung
samsung hardware:
https://github.com/CyanogenMod/android_hardware_samsung
apps samsung service:
https://github.com/CyanogenMod/android_packages_apps_SamsungServiceMode
Everything is working (sound / wifi / bluetooth / video playback) BUT!
I must edit build.prop by hand to get sound working until omni build process take care of "product_build_prop_overrides" into custom_XXXX.mk
see:
http://forum.xda-developers.com/showthread.php?t=2484747

Original Samsung Galaxy Note
Samsung n7000 initial bringup:
Modified CM n7000 device: https://github.com/chasmodo/android_device_samsung_n7000/tree/android-4.3
Modified CM galaxys2-common: https://github.com/chasmodo/android_device_samsung_galaxys2-common/tree/android-4.3
CM smdk4412 kernel: https://github.com/CyanogenMod/android_kernel_samsung_smdk4412/tree/cm-10.2
Samsung proprietary stuff: https://github.com/TheMuppets/proprietary_vendor_samsung/tree/cm-10.2
Samsung hardware tree untouched from OmniRom.
Device info:
Board platform - exynos4
SOC - exynos4210
Board name - smdk4210
Kernel specifics - unified kernel and recovery
It compiles fine using the repos listed above, but throws up a kernel assert error when flashing the Rom. Several compilers for different devices complained about it in the 'All the answers' thread. The way out of this is to flash a CM10.2 kernel immediately after the Rom flash aborts, then Omni boots up fine.
What works:
1. telephony
2. mms
3. WiFi
4. GPS
What doesn't work:
1. data
2. bluetooth turns off as soon as you turn it on
3. both sdcards are invisible from Android; all your stuff is there when you drop into recovery, though
4. Settings/Storage FC when tapped - see #3
5. Performance options also FC
6. Notification drawer cannot be pulled down
Camera cannot be tested because it shuts down as soon as you start it, saying: "No external storage available" - again, see #3

Galaxy Note II / N7100 (International)
Samsung Galaxy Note II / N7100 Bring up details.
I have a working build of the Omni rom for the N7100. Below are the details on what is working and not working. i have been using it for the last 2 days, so far not crashes or reboots all seems to be working fine. i cherry picked a few commits and included it into my build
Working :
WIFI
DATA -3G & 2G
Telephony & MMS & SMS
GPS
Sound
Camera (Both Front and Back)
SD card
Performance control
Notification drawer & Lights
Multi-Window
roadrunner
Not Working :
BT
Backlights(if i install a custom kernel then the lights work)
Device Tree for N7100 - https://github.com/tilaksidduram/device_samsung_n7100
Device smdk4412-common - https://github.com/tilaksidduram/android_device_samsung_smdk4412-common
smdk-4412 Kernel (3.0.100) - https://github.com/CyanogenMod/android_kernel_samsung_smdk4412
samsung hardware - https://github.com/CyanogenMod/android_hardware_samsung

DEVICE: GT-N7100
sources
https://www.github.com/UtkarshGupta/android_device_samsung_n7100
https://www.github.com/omnirom/android_device_samsung_smdk4412-common
https://www.github.com/omnirom/android_hardware_samsung
https://www.github.com/omnirom/android_kernel_samsung_smdk4412
https://www.github.com/TheMuppets/proprietary_vendor_samsung

Is anyone else working on d2att/d2can (Galaxy S3 I747)? I'm not overly familiar with ROM development, but I can compile CM10.2 for this device just fine, and I'm slowly working on getting Omni to compile for it as well. If someone more experienced than I is already working on it though, I'll probably just let them do it.
If I am the only one, expect some newb-ish questions in the near future.

dstruct2k said:
Is anyone else working on d2att/d2can (Galaxy S3 I747)? I'm not overly familiar with ROM development, but I can compile CM10.2 for this device just fine, and I'm slowly working on getting Omni to compile for it as well. If someone more experienced than I is already working on it though, I'll probably just let them do it.
If I am the only one, expect some newb-ish questions in the near future.
Click to expand...
Click to collapse
I think a few are... There has been chat of it in the IRC channels.

Device name: LG Optimus 4X HD
Codename: P880
Board name: X3
Chipset: Tegra 3 AP33
Everything works, except button backlight.
https://github.com/Adam77Root/android_device_lge_p880
https://github.com/Adam77Root/android_kernel_lge_x3
https://github.com/TheMuppets/proprietary_vendor_lge

[ROM][7.1.2_r24][UNOFFICIAL][grouper] LineageOS 14.1 for Nexus 7 2012

[ROM][7.1.2_r8][UNOFFICIAL] LineageOS 14.1 for Nexus 7 2012 (grouper)
*** Disclamer
By downloading and installing this ROM you agree that you do so at
your own risk, and that you understand that it probably voids your
warranty. (But does anyone still have an active warranty on this 2012
device?)
Introduction
@AndDiSa's AOSP 7 builds look pretty nice, but I needed something that seamlessly upgrades from CM13. @GtrCraft who provided our CM13 builds has moved on to other devices, so we need a new CM maintainer. I may not be the right person for that job... but I can at least share the build I made for myself. Perhaps someone will be motivated to join the fun or even take over.
[Images on screenshots tab.]
Installation instructions
Back up your data and previous ROM with TWRP 3.0.2 or 3.1.0.
Download from link below.
Wipe system, cache, dalvik.
Also wipe data unless you are coming from CM13.
Install the ROM.
Optionally add opengapps-pico.
With default settings it will give an error about insufficient space. To avoid that, first copy this gapps-config-grouper.txt file, perhaps edit it to your taste (instructions here), then copy to the device in the same directory as the opengapps zip. The opengapps updater-script will look for it there when you install opengapps.​
Reboot.
WAIT for system to settle before you decide it is slow. Some of the app optimization which used to happen during initial boot now seems to happen in the background. When it's finished, responsiveness will improve.​
If you use ext4, run fstrim.
There are ways to automate this, but I just run this app after each ROM upgrade, plus roughly once a week, after large batches of app updates from Play Store, or whenever my tablet starts to feel sluggish.​
Download
lineage-14.1-20171122-UNOFFICIAL-aaopt-grouper.zip (AndroidFileHost)
Credits / Thanks
Google / AOSP
CyanogenMod LineageOS
@AndDiSa for AOSP 7.1 -- I use his kernel tree directly, and many of his device tree mods
@GtrCraft for the CM13 tree upon which mine is based
XDA:DevDB Information
Unofficial LineageOS 14.1 for Nexus 7, ROM for the Nexus 7
Contributors
aaopt, AndDiSa,GtrCraft
Source Code: https://github.com/aperomsik/lineageos_android_device_asus_grouper/
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.1.x
Based On: LineageOS
Version Information
Status: Testing
Created 2017-01-02
Last Updated 2017-12-19

Changelog
Nearly all builds include LineageOS sync -- only mentioned specifically when it was the main point of the build.
(TESTING)20181209 (AndroidFileHost)
@AndDiSa's kernel and device tweaks since my last build and LineageOS sync.
(TESTING)20181104 (AndroidFileHost)
@AndDiSa's kernel and device tweaks since my last build and LineageOS sync.
(TESTING)20180708 (AndroidFileHost)
Added @AndDiSa's kernel and device tweaks since my last build and LineageOS sync with June patches.
(TESTING)20180121 (AndroidFileHost)
@AndDiSa's January performance tweaks. LineageOS sync with January patches.
older entries:
20171122 (AndroidFileHost)
LineageOS sync with November patches.
(TESTING) 20171112 (AndroidFileHost)
@AndDiSa's latest kernel and device tweaks.
(TESTING) 20171020 (AndroidFileHost)
LineageOS sync including October patches and KRAKN fix.
Kernel updates and latest device performance tweaks from @AndDiSa .
(TESTING) 20170811 (AndroidFileHost)
LineageOS sync including August patches.
20170717 (AndroidFileHost)
LineageOS sync brings us to 7.1.2r24 ; perf tweak from @AndDiSa
20170702 (AndroidFileHost)
LineageOS sync
20170609 (AndroidFileHost)
LineageOS sync including June patches; Following @AndDiSa's lead to intelliactive governor, for hopefully improved battery life with minimal performance impact.
20170507 (AndroidFileHost)
Following @AndDiSa's lead to pick up a better fix for RenderThread issues from UnlegacyAndroid.
20170503 (AndroidFileHost)
LineageOS sync brings us to 7.1.2_r8
20170423 (AndroidFileHost)
LineageOS sync brings us to 7.1.2_r2
Updated with @AndDiSa's kernel and device tree updates, including the RenderThread app crash fix he got from @Ziyann.
20170315 (XDA)
Updated with @AndDiSa's kernel and device tree updates.
20170308 (AndroidFileHost)
LineageOS sync includes March security patches. For unknown reasons this build seems to be somewhat crashy.
20170226 (AndroidFileHost)
LineageOS sync includes Feb security patches
20170212 (AndroidFileHost)
AndDiSa's kernel updates
20170129 (AndroidFileHost)
AndDiSa's kernel updates
20170122 (AndroidFileHost)
LineageOS sync, including boot animation and settings updates and various other fixes here and there.
20170108 (AndroidFileHost)
Switch to Snap camera, at least for now.
20170101 (AndroidFileHost)
First LineageOS 14.1 build for grouper.
Unofficial CM 14.1 (XDA)
Previous history in my CM 14.1 thread.
More detailed history: my device tree, AndDiSa's kernel, LineageOS .

Try this at home
(a.k.a. Build instructions)
There are plenty of guides to building CM. Those guides are still relevant with the possible exceptions of their URLs. Assuming you have read enough such guides to have the general idea of how to build a ROM from source, here is one way you can set up your source tree to mimic mine.
In a clean directory, perhaps ~/android/lineageos-14.1/ :
Code:
repo init -u git://github.com/LineageOS/android.git -b cm-14.1
git clone https://github.com/aperomsik/lineageos_local_manifests.git .repo/local_manifests -b cm-14.1
repo sync -c
. build/envsetup.sh
brunch grouper

fantastic Job! We now have a new ROM

aaopt said:
(a.k.a. Build instructions)
There are plenty of guides to building CM. Those guides are still relevant with the possible exceptions of their URLs. Assuming you have read enough such guides to have the general idea of how to build a ROM from source, here is one way you can set up your source tree to mimic mine.
In a clean directory, perhaps ~/android/lineageos-14.1/ :
Code:
repo init -u git://github.com/LineageOS/android.git -b cm-14.1
git clone [email protected]:aperomsik/lineageos_local_manifests.git .repo/local_manifests -b cm-14.1
repo sync -c
. build/envsetup.sh
brunch grouper
Click to expand...
Click to collapse
Recent version of repo doesn't seem to explicitly support '-c' parameter any more to reduce the download size (mine have been around 30GB). Thanks for these instructions; still, I would like to know how you integrated the required changes for 14.1 grouper.

nixuser1980 said:
Recent version of repo doesn't seem to explicitly support '-c' parameter any more to reduce the download size (mine have been around 30GB). Thanks for these instructions; still, I would like to know how you integrated the required changes for 14.1 grouper.
Click to expand...
Click to collapse
It's all in the local manifests.
Sent from my Nexus 7 using Tapatalk

Thank you aaopt for keeping our old Nexus 7 alive !
Can someone tell me the perfect settings for Kernel Adiutor to get the maximum performances ? Even if the battery life is shorten.
Thanx in advance

aaopt said:
It's all in the local manifests.
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
Just took a look at those. I have been using TheMuppets at github for the proprietary components, having needed to patch the nvidia components due to an old GNU-ism (gcc extension that was eventually formalised).
Saw that you got the broadcom et al components from your "ads" git repo and wanted to know if there was any reason not to use TheMuppets (or if, indeed, you sourced them from there and modified them), that I can learn from.
Thanks again.

aaopt said:
(a.k.a. Build instructions)
There are plenty of guides to building CM. Those guides are still relevant with the possible exceptions of their URLs. Assuming you have read enough such guides to have the general idea of how to build a ROM from source, here is one way you can set up your source tree to mimic mine.
In a clean directory, perhaps ~/android/lineageos-14.1/ :
Code:
repo init -u git://github.com/LineageOS/android.git -b cm-14.1
git clone [email protected]:aperomsik/lineageos_local_manifests.git .repo/local_manifests -b cm-14.1
repo sync -c
. build/envsetup.sh
brunch grouper
Click to expand...
Click to collapse
Can confirm that this works - now I just need to find the magic in the code. Also, how did kernel/timeconst.pl not need to be replaced with timeconst.bc and kernel/Makefile not need to be amended to use bc instead of perl? I was getting a compile error because of this in the grouper kernel tree.

nixuser1980 said:
Just took a look at those. I have been using TheMuppets at github for the proprietary components, having needed to patch the nvidia components due to an old GNU-ism (gcc extension that was eventually formalised).
Saw that you got the broadcom et al components from your "ads" git repo and wanted to know if there was any reason not to use TheMuppets (or if, indeed, you sourced them from there and modified them), that I can learn from.
Thanks again.
Click to expand...
Click to collapse
The "ads" git repos referenced in my manifests are AndDiSa's. My repos are labelled "aaopt".
As stated in OP my goal with this ROM is to continue GtrCraft's CM13 work now that he has moved on to other devices. He had been following AndDiSa's proprietary components from AOSP so I just continued that way. In fact I took it a step further by using AndDiSa's kernel directly, not (yet?) seeing a clear reason to maintain my own. I just want to do the minimum amount of work needed to keep somewhat up to date with upstream LineageOS and take advantage of AndDiSa's device-specific performance improvements from the AOSP side.

aaopt said:
The "ads" git repos referenced in my manifests are AndDiSa's. My repos are labelled "aaopt".
As stated in OP my goal with this ROM is to continue GtrCraft's CM13 work now that he has moved on to other devices. He had been following AndDiSa's proprietary components from AOSP so I just continued that way. In fact I took it a step further by using AndDiSa's kernel directly, not (yet?) seeing a clear reason to maintain my own. I just want to do the minimum amount of work needed to keep somewhat up to date with upstream LineageOS and take advantage of AndDiSa's device-specific performance improvements from the AOSP side.
Click to expand...
Click to collapse
Oops. I got that wrong. Anyway, thanks for your work and I learned a few things from it.

Just flashed it, will see how it goes.
For now when the only bug
When i take picture with camera, it mirrors it and makes it look pixelish

Great! Happy to see our grouper still updated, thanks
Inviato dal mio Nexus 7 utilizzando Tapatalk

Hey there! Will there be a ROM for Tilapia? I'd be nice to try it on it. I'm not a programmer but as I noticed building for Grouper and Tilapia is just a little different.

I think You can just flash the grouper recovery and flash the ROM.

From one day of full usage:
- The charging is a bit slow, i don't know if it's a big battery or the power flow is low
- There is lagging, like the ROM isn't optimized yet, slowdowns, applications are usually giving me stopped working etc...
- The camera bug i mentioned above, when u take picture it looks pixelated
I'll do more reviews like this if the updates keep coming

Cannot use the video option in the camera app.
The camera app force closes.

CrazyLegenD said:
From one day of full usage:
- The charging is a bit slow, i don't know if it's a big battery or the power flow is low
- There is lagging, like the ROM isn't optimized yet, slowdowns, applications are usually giving me stopped working etc...
- The camera bug i mentioned above, when u take picture it looks pixelated
I'll do more reviews like this if the updates keep coming
Click to expand...
Click to collapse
Here is a build I am testing, in which all I did was sync sources with upstream. It feels somewhat less laggy to me... not sure if it is due to Lineage changes, 7.1.1_r9, or the fact that I used newer opengapps.
Camera issue is interesting -- I have a shot in my camera folder from 11-29 which looks better. Current shots claim to have the same resolution but file size is much smaller, which suggests the wrong jpeg quality setting was used. Something to dig for.
Regarding charging, are you saying it charges more slowly with this ROM than with others? Charging speed varies widely for me but recently it hasn't been that bad. If your hardware is behaving the expected charging time from nearly empty is supposed to be 3-4 hours. Over time the connector gets loose and then charging can take much longer. There are plenty of charging-related threads around here including some which say to replace the USB port and one which says take out the existing port and put it back in. Tried that on the worst of my family's tablets and it helped for a day or so but then went back to old slow charging speed.

Why is the "Mobile network signal" in orange in a WiFi tablet ?

eNVy said:
Why is the "Mobile network signal" in orange in a WiFi tablet ?
Click to expand...
Click to collapse
How did you get to that screen?

[KERNEL-SOURCE][STABLE] Stable Kernel Source For LYF Wind 3 (LS-5502) :)

INTRODUCTION:​
The kernel is a computer program at the core of a computer's operating system with complete control over everything in the system. It is an integral part of any operating system. It is the "portion of the operating system code that is always resident in memory". It facilitates interactions between hardware and software components. On most systems, it is one of the first programs loaded on startup (after the bootloader). It handles the rest of startup as well as input/output requests from software, translating them into data-processing instructions for the central processing unit. It handles memory and peripherals like keyboards, monitors, printers, and speakers. In Android It is very important.​
STORY:​
As 'LYF' OEM has not released kernel source for the phone and never will. After many repeated tries to contact the OEM to release the Kernel Source, it seems they did not respond at all. After many refusals from the OEM, we decided to make the kernel source on our own.
And Here we are with the kernel.
Total Credits goes to shahnawaz_sheikh :angel:
What Works?​
boot
mtp/usb
RIL
Notification LED - Fixed On 7th July
Flashlight - Fixed On 17th July
Sensors
Touchscreen - Fixed On 4th June by shahnawaz_sheikh
Display
Audio
Camera - Can't Fix Due to Unique Lens Used
And Everything! :laugh:
Nutshell: This is a stable Kernel source for the phone and everything works!.
CREDITS:​
First Of All to everyone
Many Many Thanks To @shahnawaz_sheikh :angel:
My Brother @YashrajYadav | Yassuz
My Guidance @TipzTeam
My Mentor Mohd Faraz | androiabledroid
Me OfCourse
And EveryOne
NOTE:​
This is the pure work of Me(@The_God_Speed) and the people mentioned above. If you may somehow uses this Please give them proper credits. ​
LINK:​
Check Github :good:
Many Updates Coming. Make sure to follow on XDA and Telegram. ​
Support Group:​ Telegram
Version Info:​ Stable
Architecture:​ Both [arm + arm64]
Have Fun!!!
And
Once
Again
THANKS!

Reserved!

Nice!

Updated!
Just updated the kernel source of brach cm-14.1 ?
INFO:​
Arm64​1. lineage-17.1 kernel = can boot roms from lollipop to all the way up to Android 10
Arm​1. lineage17.1 kernel = can boot roms from Oreo to Android 10
2. cm-14.1 kernel = can boot roms from lollipop to nougat.
All the things mentioned above are well tested by me ??

[rom][aosp][grouper-tilapia][ua]android-8

Hello guys This is AOSP unlegacy android build.
It is a android version-8 (TESTING) .
Sources-
Source code- https://github.com/Unlegacy-Android/android
device- https://github.com/Unlegacy-Android/android_device_asus_grouper/tree/aosp-8.1
kernel- https://github.com/Unlegacy-Android/android_kernel_nvidia_tegra3
vendor - https://github.com/Unlegacy-Android/proprietary_vendor_nvidia/tree/aosp-8.1
Sorry links might be broken or removed
Issues
no camera
does not function with Gapps
no proper otg support
Thanks
@unlegacy android team
@Ziyan
@aosp
Status-testing
This security patches dupes and is faked
****disclaimer
Im not responsible for any kind of damage to device
If you point your finger at us we'll laugh at you
Guys I have got 2021 security patch level at the first flash and at the second flash I found it 2018. Just comment me your security patches.
Works on tilapia and grouper
download Link https://drive.google.com/file/d/10VaRPsRlJTsnKXLkmOiwpcD9pQP9wZNW/view?usp=sharing

Thank you!
I will use it!
edit:How did you write local_manifests?
Also, did you use the Tegra3 hardware tree?

Hey guys how is this rom

few__ said:
Thank you!
I will use it!
edit:How did you write local_manifests?
Also, did you use the Tegra3 hardware tree?
Click to expand...
Click to collapse
Yup I used the normal repo commands (I don't remember properly as I started compiling it 1.5 year ago)
SORRY for if any wrong sources aye!

Hi
Is ROM better than @ud4's 8.1.0 ROM? I currently have @ud4's and there an issue where some apps (like RedReader, Magisk Manager stable, Play Store, etc...) won't launch; they just show a blank screen. Does this ROM also have that issue?
Thanks

Question Now Focusing On Custom Rom (LineageOS) For Our Galaxy Z Flip 3

Hello
I did Bought a Samsung Galaxy Z flip 3 demo version , i want to build TWRP for it
Spoiler: That is Done
yesterday i downloaded the Kernel source code from Samsung , now i just need TWRP Sources and and Create a Device Tree to built it
if you want TWRP for this phone , just comment down below (for some motivation)
Spoiler: that done too , look for the custom working kernel
Now For a The Custom Kernel
I Manage to Get A Custom Kernel Working with A lot Of Optimisations (Thanks @chrisaw and Others) on a Old OneUI (That System That Came with the Kernel) and it work well (it need some minor touches)
the Kernel Cant Work on Newer OneUI and Custom Roms (Pixel EXperience) because Of new Changes in Vendor Are not Compatible with the Kernel
A guess this Need A lot Of Working (Everytime Samsung do it their Way and Dont Care about The Correct Way)
ScreenShot of the Kernel
Spoiler: That is Done too too
now on Focusing on The Custom Rom , i download LineageOS 19.0 Source Code as i will build for 2 separate phones (Galaxy Z Flip3 'snapdragon 888' and UMIDIGI F1 Play 'Mediatek Helio P60') consecutively
this rom will be based on treble gsi patches but working only on Galaxy Z Flip3
i manage to build LineageOS 19.0 for Galaxy Z Flip3 , i will not share it now cause :
1 - it is not daily driver or usable , you can call it pre-alpha
2 - it has a lot of bugs that i saw , it could be other i didn't
3 - it is a Treble gsi just for testing purposes and does not have gapps (gapps needed to be included in the gsi not like a normal rom)
4 - i fix the fingerprint , now it is usable
5 - don't ask me about rear screen , it is perfectly not working at all (if you close the phone , the main display become black , rear screen have just samsung galaxy logo....)
6 - other things i forgot
Any Help will be appreciated
Stay Tune
Thanks

Yeah I'd like to see a fully functional TWRP

yes!

really appreciated!

I'm in

hells yeah

ok so i reinstall my ubuntu setup cause apt went broken , but now im good to start
my initial work is the device tree , it is still WIP
GitHub - shadowofleaf96/android_device_samsung_b2q: For building TWRP for Samsung Galaxy Z Flip 3 5G
For building TWRP for Samsung Galaxy Z Flip 3 5G . Contribute to shadowofleaf96/android_device_samsung_b2q development by creating an account on GitHub.
github.com
the kernel still not building , im working on it
thanks for waiting

GitHub - StarKissed/starkissed-kernel-b2q
Contribute to StarKissed/starkissed-kernel-b2q development by creating an account on GitHub.
github.com
I never finished it, but this may help with getting the kernel to build.
It's based on the ROG Phone 5 changes required for the isolated source.
[SOURCE] ASUS_I005_1-kernel (MacOS / Linux)
WARNING: This is NOT a custom kernel! GPL requires that source is released for Android kernels. It does not, however, require that the source is tracked. https://www.asus.com/supportonly/ROG%20Phone%205%20(ZS673KS)/HelpDesk_Download/ Each...
forum.xda-developers.com

twistedumbrella said:
GitHub - StarKissed/starkissed-kernel-b2q
Contribute to StarKissed/starkissed-kernel-b2q development by creating an account on GitHub.
github.com
I never finished it, but this may help with getting the kernel to build.
It's based on the ROG Phone 5 changes required for the isolated source.
[SOURCE] ASUS_I005_1-kernel (MacOS / Linux)
WARNING: This is NOT a custom kernel! GPL requires that source is released for Android kernels. It does not, however, require that the source is tracked. https://www.asus.com/supportonly/ROG%20Phone%205%20(ZS673KS)/HelpDesk_Download/ Each...
forum.xda-developers.com
Click to expand...
Click to collapse
thanks
samsung released android 12 kernel so i will merge the changes from your kernel to mine

Shadow Of Leaf said:
thanks
samsung released android 12 kernel so i will merge the changes from your kernel to mine
Click to expand...
Click to collapse
That kernel never booted, so that would probably do more harm than good. It does, however, include the changes to make an inline kernel build outside the source. It was more an example than a template.

twistedumbrella said:
That kernel never booted, so that would probably do more harm than good. It does, however, include the changes to make an inline kernel build outside the source. It was more an example than a template.
Click to expand...
Click to collapse
ok
yes that what i will do , i will use the samsung open source kernel (android 12) , fix to boot recovery and boot the system , when it does that i will include your changes and see if it works or not

Thanks for your contribution。

Cyanide_zh said:
Thanks for your contribution。
Click to expand...
Click to collapse
you welcome

some good news
TWRP is Booted on our Galaxy Z Flip 3 (SM-F711B) but touchscreen is not working
i think i have a problem with firmware , stay tuned

Shadow Of Leaf said:
some good news
TWRP is Booted on our Galaxy Z Flip 3 (SM-F711B) but touchscreen is not working
i think i have a problem with firmware , stay tuned View attachment 5671531
Click to expand...
Click to collapse
can you share the non-touch version?
i hope he can find the problem and fix it

Maroshall said:
can you share the non-touch version?
i hope he can find the problem and fix it
Click to expand...
Click to collapse
i think i fix the touchscreen problem and its working
there is some minor problems i will fix them and upload it here
also the kernel does not boot on oneui , i have to fix it

the work is done (or atleast it works)
you can check it here TWRP Thread
@twistedumbrella i build the kernel it works on twrp but no luck with OneUI (even with knox and other security measurements disabled) it does panic (kernel panic) i need to do some investigation regarding this , if you want to help i will upload my kernel source code soon​

I have the US version, which is why I abandoned the kernel. I had no way to test the changes specific to Samsung, which would be OneUI.
Your best bet would be looking into the changes for an S21 / S22 because they are going to have the Samsung specific changes.

twistedumbrella said:
I have the US version, which is why I abandoned the kernel. I had no way to test the changes specific to Samsung, which would be OneUI.
Your best bet would be looking into the changes for an S21 / S22 because they are going to have the Samsung specific changes.
Click to expand...
Click to collapse
ah ok thanks
for now i fix to kernel panic , now kernel boot in OneUI But after the loading icon the screens went black
so thanks again and sorry for disturbing you

No worries. I would rather you know I don't know, if that makes sense. Sounds like you are more than capable either way.