Related
Hi, I have a big problem with my new Phone Feiteng H7100! After I flashed the ROM (from needrom), nothing happens on the phone! Everything went as described until the green circle. Nothing now … when connected to the PC appears a USB / network device name: Alcatel Single RNDIS interface, nothing more happens.
Can someone help me here? Please
jemmars
Hello everyone,
can anyone help me here really? I've also, quite diligently search through the forums for possible solutions, but I have not found anything. Please, please help me with my phone ... where I still have birthday ... your help I would be today's greatest gift!
Did you tried to reflash with another ROM?
Maybe this will help you: http://forum.xda-developers.com/showthread.php?t=2186116
Please post your experience.
hi, can anyone help me, i have a feiteng h7100, totally bricked, not turn it on, the computer dont recognize, is a dead phone, i flash it with sp flashtool first time says ok, but no turn it on, so i flash it again, in the middle of flashing says error and the cpu dont recognize any more my phone, any ideas..
never flash DSP_BL and preloader. as long as the device is recognized on your PC, its not "dead" othewise you can try the "testpoint" methode, but not all motherboards have one.
hi people , i hope somebody will see this tread and hop it someone can help me
I have a Allwinner a13 tablet ( picture atached ) , but yesterday when i turned it off i leave it , and today when i tryed to turn it on IT JUST WONT START , tryed to charge ( with power adapter , with USB ) but still nothing happening . Does somebody know what is the problem and maybe somebody help with this sh** :/
Thanks in advance !
milance92 said:
hi people , i hope somebody will see this tread and hop it someone can help me
I have a Allwinner a13 tablet ( picture atached ) , but yesterday when i turned it off i leave it , and today when i tryed to turn it on IT JUST WONT START , tryed to charge ( with power adapter , with USB ) but still nothing happening . Does somebody know what is the problem and maybe somebody help with this sh** :/
Thanks in advance !
Click to expand...
Click to collapse
This was a while ago but do you still have the problem?
baek_doo_san said:
This was a while ago but do you still have the problem?
Click to expand...
Click to collapse
My Tablet is also....
Update with new factory firmware and bricked.... The firmware procedure ended with "OK !", tablet automatically go reboot and nothing (with LOGO-screen)....
???????
I don't understand....
All software was original factory....
A13 tablet
photosam said:
My Tablet is also....
Update with new factory firmware and bricked.... The firmware procedure ended with "OK !", tablet automatically go reboot and nothing (with LOGO-screen)....
???????
I don't understand....
All software was original factory....
Click to expand...
Click to collapse
Try downloading one of the root tools like srsroot which will let you boot into debug mode. That should restore your boot structure. Have you already tried this?
I rooted it which was absolutely fine but I tried to flash a custom rom onto it. I'm not going to lie I had no idea what this involved, what the risks were there , even I flashed it.
Anyway during the installation of the new Rom seemed to be going fine with Research Download and after finish installing it was just died. Since then i cannot get it to turn on and it just doesn't power up. It also won't charge now.
also when plugged into the PC it does not detected , so I'm hoping the fact it's still recognized as something means there may be some hope left.
plzzzz friends tell me what i do,
I have no idea what I'm doing, I am just here with my lovely new phone not turning on.
some persons have given idea of doing heating of the Processor IC / Processor Chip because of Boot failure , but how i do this process.
help me friends now.
Thanx in advance
I am having same problem here. I have intex aqua young sc8810 chip in phone. I tried to flash but it stuck at userdata for few seconds then it shown error while flashing now phone is totally dead not charging nor detect by USB or anything else.
HELP OR ASSIST PLEASE , :crying:
My device doesn't startup/boot since
Accidentally deleted some folder and files on Root directory
I try to Charge several times my Battery, also bought a new one.
But it doesn't fix, startup or boot my Device
-
The Reason is : I try to flash some Tweaks , on SuperCharger v6
Expecting for some Better result's on my device , but it only keeps my Battery Drain so fast .
I try to Remove the SuperCharger v6 but accidentally Deleted some Folders
Also i deleted , SuperChargerv6 File .
I didn't intentionally check those folders , i just mistouch and deleted some folder w/ files using Root Explorer on it ,
The folders is on Root directory ,
This is the name of Folder's : ( /dev & /system )
-
i can't be detected on ADB since my Driver is Unspecified
and it only shows " Qualcomm CDMA Technologies MSM "
And it installed or it turns to Human Interface Device "USB Input Device"
What should i do if it doesn't Detect my device when i try to type in adb : adb shell
no devices is showing
This is my device : Starmobile ICON
Specs :
Starmobile Icon Specifications
1.2GHz quad-core Qualcomm Snapdragon MSM8225Q processor
4.5-inch qHD (540x960) IPS capacitive dipslay, 245ppi
Multi-touch with Asahi Dragontrail Glass
350MHz Adreno 203 GPU
Android 4.1.2 (Jelly Bean)
1GB of RAM
4GB of Internal Storage
microSD card slot up 32GB
3G/HSPA (WCDMA 850/2100)
HSDPA 7.2mbps / HSUPA 5.76mbps
GSM 850/900/1800/1900 (Quad-band)
WiFi 802.11 b/g/n / WiFi Hotspot
microUSB v2.0 / Bluetooth
Li-Ion 1,800mAh Battery
Light / Proximity / Gravity Sensor
Iam begging for answer and helps :crying:
Actually this is my first time to post this kind of thread i hope someone could really help me with this
This is my only Phone i keep this a couple of months , but i can't afford to lose this my father will kick my ass and kill me if he will know this phone had this problem
Hi
Thanks for writing to us at XDA Assist. Well, you're in a bit (actually, a lot) of trouble here. By deleting /system you've completely erased your operating system, so there's absolutely no way your phone is going to boot no matter how many new batteries you put into it, there's no operating system for the phone to boot into. I need some more information please, does the device power on at all? Do you see a never-ending boot animation? Or are there absolutely no signs of life from the phone?
timmaaa said:
Hi
Thanks for writing to us at XDA Assist. Well, you're in a bit (actually, a lot) of trouble here. By deleting /system you've completely erased your operating system, so there's absolutely no way your phone is going to boot no matter how many new batteries you put into it, there's no operating system for the phone to boot into. I need some more information please, does the device power on at all? Do you see a never-ending boot animation? Or are there absolutely no signs of life from the phone?
Click to expand...
Click to collapse
Thank you so much for Response sir :crying:
Absolutely no Boot , No sign of anything . but when i try to put a new Battery on it , it boot for a couple of times :
Logo of Carrier after 4 tries of booting , coz iam hoping to boot in to Bootloader , stock recovery and trying if CWM still exist
It turns back to deadboot , and no startup no power , but still Detectable at my Desktop
My desktop is Windows 7 ultimate x64-bit Service pack 1 , is it possible or how can i forcely Flash system.ext4.tar or /system File on it ? and is it Okay or Possible to flash a Firmware that comes from another Model/Device that has same Specifications ?
i try to explore and search deep on any GSM or related to my problems ,
Try some " how to install driver of Qualcomm MSM8225Q , how to install qualcomm drivers , how to flash on ADB , but still no luck ..
Also on my Starmobile ICON , this is one of my Problem, is Where do i hell can i get this phone model FIRMWARE Thats what the tech told me " Only Stock Firmware is my Main Solution "
Please help me iam just a teenager , can't afford to buy a new one , and still hoping to revive my Phone
Anyway tnx again from your response sir :crying:
rekz100 said:
Thank you so much for Response sir :crying:
Absolutely no Boot , No sign of anything . but when i try to put a new Battery on it , it boot for a couple of times :
Logo of Carrier after 4 tries of booting , coz iam hoping to boot in to Bootloader , stock recovery and trying if CWM still exist
It turns back to deadboot , and no startup no power , but still Detectable at my Desktop
My desktop is Windows 7 ultimate x64-bit Service pack 1 , is it possible or how can i forcely Flash system.ext4.tar or /system File on it ? and is it Okay or Possible to flash a Firmware that comes from another Model/Device that has same Specifications ?
i try to explore and search deep on any GSM or related to my problems ,
Try some " how to install driver of Qualcomm MSM8225Q , how to install qualcomm drivers , how to flash on ADB , but still no luck ..
Also on my Starmobile ICON , this is one of my Problem, is Where do i hell can i get this phone model FIRMWARE Thats what the tech told me " Only Stock Firmware is my Main Solution "
Please help me iam just a teenager , can't afford to buy a new one , and still hoping to revive my Phone
Anyway tnx again from your response sir :crying:
Click to expand...
Click to collapse
Unfortunately I can't find any stock firmware for your device anywhere so your options are pretty limited. You can try asking your question here:
Android Q&A, Help & Troubleshooting
If you're unable to get help there then I think your only option is to take the device to a service centre and have it inspected by professionals.
timmaaa said:
Unfortunately I can't find any stock firmware for your device anywhere so your options are pretty limited. You can try asking your question here:
Android Q&A, Help & Troubleshooting
If you're unable to get help there then I think your only option is to take the device to a service centre and have it inspected by professionals.
Click to expand...
Click to collapse
By the way tnx again :crying: :crying: :crying: :crying: :crying:
Thread closed, thanks.
Hi
I updated my Phone today using an SD card from the zte website. All was going well and then the screen went off and now I can't start the phone. I have tried a hard reset but it's dead!
Any ideas? Gutted as it's almost new!
Please help if you can.
Cheers
adamfoulkes said:
Hi
I updated my Phone today using an SD card from the zte website. All was going well and then the screen went off and now I can't start the phone. I have tried a hard reset but it's dead!
Any ideas? Gutted as it's almost new!
Please help if you can.
Cheers
Click to expand...
Click to collapse
I have the same problem, did you find a solution?
cheers
Hi
I'm in the same situation, someone has a solution
Help
Me 2.
Help pls.
:crying:
Does it turn on but gets stuck while boot or it doesn't turn on at all?
Sent from my GT-S7262 using Tapatalk
Tali099 said:
Does it turn on but gets stuck while boot or it doesn't turn on at all?
Sent from my GT-S7262 using Tapatalk
Click to expand...
Click to collapse
Hi Tali099 and sorry for my terrible English.
No boot log and only black screen.
Absolutely dead !!!
when connected to pc, find the mobile as: qhsusb_bulk qualcomm 9008 com5.
I had try to unbrick it but unfortunately i didn't find any way to unbrick the chipset: Qualcomm MSM8939 Snapdragon 615 who have the zte blade s6.
Very deep hard brick. :crying:
Have you any idea how to unbrick it ???
I'm the same situation that you.
gining said:
Hi Tali099 and sorry for my terrible English.
No boot log and only black screen.
Absolutely dead !!!
when connected to pc, find the mobile as: qhsusb_bulk qualcomm 9008 com5.
I had try to unbrick it but unfortunately i didn't find any way to unbrick the chipset: Qualcomm MSM8939 Snapdragon 615 who have the zte blade s6.
Very deep hard brick. :crying:
Have you any idea how to unbrick it ???
Click to expand...
Click to collapse
I'm the same situation that you. I need several files for unbrick our phone but I don't found it. I have follow this tutorial: htcmania.com/showthread.php?t=924041
jjcc1999 said:
I'm the same situation that you. I need several files for unbrick our phone but I don't found it. I have follow this tutorial: htcmania.com/showthread.php?t=924041
Click to expand...
Click to collapse
I tried and this way but the "color" was only finds the com port and nothing else. Searching, I found for the "color" is only for chipset Msm8974 and not for ours chipset msm8939. We must look to find the way for unbrick our chipset (msm8939). unfortunately nothing i found as now.
If I can not do anything in the next few days, i will defamation the ZTE in all forums because our problem started from the ZTE proposal to upgrade our mobile with the new version.
gining said:
I tried and this way but the "color" was only finds the com port and nothing else. Searching, I found for the "color" is only for chipset Msm8974 and not for ours chipset msm8939. We must look to find the way for unbrick our chipset (msm8939). unfortunately nothing i found as now.
If I can not do anything in the next few days, i will defamation the ZTE in all forums because our problem started from the ZTE proposal to upgrade our mobile with the new version.
Click to expand...
Click to collapse
I agree with you because the web does not put any warning that may happen or specification in this regard.
Hi
I updated my Phone today using an SD card from the zte website. All was going well and then the screen went off and now I can't start the phone. I have tried a hard reset but it's dead!
Any ideas? Gutted as it's almost new!
Please help if you can.
Cheers
I have exactly the same situation after an official upgrade via SD card..
Black screen will not power on only shows blue light when connected to a charger or laptop.
I have been waiting for over two weeks now for ZTE to provide a solution, nothing, all I get is we are looking into it..
Terrible service and certainly won't be buying any ZTE again
Guys so we are really dead, there is nothing to be done about this problem ? Is this hard-brick ? Any solution here ????
same here
my phone brick after repartition this dump phone
i forget to search that file first..
Please help me s6 was brick [email protected]
reply from ZTE
Hello,
I have been backwards and forwards with ZTE to get this problem resoved and still not sorted. They did send me some instructions of how to reset the device but it needs a piece of software to be able to do this and ZTE won't give it to me to try it out!!!!
I would upload it on here but it seems I am not allowed to or cannot find out how to do it.
This is so frustating!
I got the same problem (black screen) when after rooting and different experiment I tried to put the original ROM back which I downloaded from needrom. After 3 days of continuous searching, I concluded that I have damaged the eMMC Partition by installing a different firmware that was not suitable for my Europe version of Mobile.
This link was quite helpful to understand the problem.
http://forum.xda-developers.com/yureka/help/question-qualcomm-download-mode-k-t3068040
To solve this problem first I need the 8939_msimage.mbn of Qualcomm 615 and related files. The other option is to use the service ROM and ZTE TOOL STUDIO, I am unable to find this ROM and other files to repair bootloader. If someone with working ZTE blade s6 or other Qualcomm 615 chipset phone can provide this, it would be really helpful.
Following files are required at least from a Qualcomm 615 MSM8939 Chipset.
8939_msimage.mbn
MPRG8939.mbn
patch0.xml
sahara.xml
rawprogram0.xml
Hello all, I have the same problem with my phone except that when it boot , it freezes on " ZTE screen" . What can I do ?
magicfab38 said:
Hello all, I have the same problem with my phone except that when it boot , it freezes on " ZTE screen" . What can I do ?
Click to expand...
Click to collapse
You can enter recovery mode Power On pressing volume up key.
Try "wipe cache partion" at first and if S6 still doesn't boot up, try next "wipe data/factory reset".
If both measures doesn't work, your system has damage from unknown reason.What change did you it?
I have the same problem
:crying:
adamfoulkes said:
Hi
I updated my Phone today using an SD card from the zte website. All was going well and then the screen went off and now I can't start the phone. I have tried a hard reset but it's dead!
Any ideas? Gutted as it's almost new!
Please help if you can.
Cheers
Click to expand...
Click to collapse
adamfoulkes said:
Hi
I updated my Phone today using an SD card from the zte website. All was going well and then the screen went off and now I can't start the phone. I have tried a hard reset but it's dead!
Any ideas? Gutted as it's almost new!
Please help if you can.
Cheers
Click to expand...
Click to collapse
Did you find a solution ?
---------- Post added at 07:32 PM ---------- Previous post was at 07:17 PM ----------
safderali5 said:
I got the same problem (black screen) when after rooting and different experiment I tried to put the original ROM back which I downloaded from needrom. After 3 days of continuous searching, I concluded that I have damaged the eMMC Partition by installing a different firmware that was not suitable for my Europe version of Mobile.
This link was quite helpful to understand the problem.
http://forum.xda-developers.com/yureka/help/question-qualcomm-download-mode-k-t3068040
To solve this problem first I need the 8939_msimage.mbn of Qualcomm 615 and related files. The other option is to use the service ROM and ZTE TOOL STUDIO, I am unable to find this ROM and other files to repair bootloader. If someone with working ZTE blade s6 or other Qualcomm 615 chipset phone can provide this, it would be really helpful.
Following files are required at least from a Qualcomm 615 MSM8939 Chipset.
8939_msimage.mbn
MPRG8939.mbn
patch0.xml
sahara.xml
rawprogram0.xml
Click to expand...
Click to collapse
Hi bro did you find a solution to unbrick the zte blade s6 ?