Related
Quick review of the JOTO - Samsung Gear 2 Screen Protector Film I ordered from Amazon.com.
These protectors are very clear but the adhesive doesn't create a good bond at the edges. You can see this lift in the picture I provided. Check out the bottom portion of the protector. They do not cover the entire glass area of the screen.
My order came with 3 very thin protectors. Straight out of the box one of the corners on all of the protectors was slightly bent (not creased), which may be the cause of the edges not sticking well. The adhesive seemed to be on the weak side too. I tried applying 2 of the protectors, but got the the same result.
BlackZenith said:
Quick review of the JOTO - Samsung Gear 2 Screen Protector Film I ordered from Amazon.com.
These protectors are very clear but the adhesive doesn't create a good bond at the edges. You can see this lift in the picture I provided. Check out the bottom portion of the protector. They do not cover the entire glass area of the screen.
My order came with 3 very thin protectors. Straight out of the box one of the corners on all of the protectors was slightly bent (not creased), which may be the cause of the edges not sticking well. The adhesive seemed to be on the weak side too. I tried applying 2 of the protectors, but got the the same result.
Click to expand...
Click to collapse
From what I've read in the manual, they don't recommend using screen protectors as it could cause "Do not use a screen protector. This causes touch screen sensor malfunctions."
I don't know if this is the usual Manual talk, as this is the first time I've actually read part of a manual
Check out the manual here:
http://www.tizenexperts.com/2014/04/tizen-samsung-gear-2-user-manual-sm-r380/
Good review, was thinking of picking some up but I might steer clear of these.
I picked up the Spigen screen protectors and they fit perfect. I wonder if they sent you a protector that was designed for the Neo since it has a smaller screen?
joto screen protectors
BlackZenith said:
Quick review of the JOTO - Samsung Gear 2 Screen Protector Film I ordered from Amazon.com.
These protectors are very clear but the adhesive doesn't create a good bond at the edges. You can see this lift in the picture I provided. Check out the bottom portion of the protector. They do not cover the entire glass area of the screen.
My order came with 3 very thin protectors. Straight out of the box one of the corners on all of the protectors was slightly bent (not creased), which may be the cause of the edges not sticking well. The adhesive seemed to be on the weak side too. I tried applying 2 of the protectors, but got the the same result.
Click to expand...
Click to collapse
I had bought the same screen protectors and had the same issues you did. The top and bottom seemed like the had no adhesive on them at all and the screen protectors themselves are terrible. I ended up ordering some armersuit screen protectors as thats the brand I had on my original galaxy gear and I loved it, i'll post a review once they actually come in.
cryptiq said:
I picked up the Spigen screen protectors and they fit perfect. I wonder if they sent you a protector that was designed for the Neo since it has a smaller screen?
Click to expand...
Click to collapse
Thanks. I just ordered the Spigen ones.
BlackZenith said:
Thanks. I just ordered the Spigen ones.
Click to expand...
Click to collapse
I think to cut a piece of a telephone screen protector for my gear!!!
Does it come with one already applied to the screen or is it just a plastic wrap around the phone?
It is just thin plastic.
Dozenboy0012 said:
It is just thin plastic.
Click to expand...
Click to collapse
Mine came with a protector already applied front and rear. the plastic that was on the phone had to be taken off to put the SIM in and much to my surprise there was a screen protector already on the screen.
There's a screen protector on it under the plastic sleeve. You can tell it's there by running your hand over the front facing camera area. It's a finger print magnet tho so I took it off.
Sent from my LG-H830 using Tapatalk
Same with mine. I didn't realize it was there until I noticed the seam around the prox sensor.
I left mine on, no problem with touch responsiveness.
So?
Is it just plastic or not. I think it is. I bought a very expensive screen protector cause of the expense of the phone and it does not fit the LG G5. It also doesn't stick down at the top where it curves. Taking this back again.
[email protected] said:
Is it just plastic or not. I think it is. I bought a very expensive screen protector cause of the expense of the phone and it does not fit the LG G5. It also doesn't stick down at the top where it curves. Taking this back again.
Click to expand...
Click to collapse
Seems like it's just cheap, generic shipping-protection plastic, yeah. I had a screen protector that shipped with my case, but it also didn't stick at the top where it curves... So, it's a good thing I was just buying for the case. Now I just have to never, ever, ever drop it on that spot at the top where it curves...
so, what about applying a tempered glass protector? On top of the existing one? or remove the existing one?
I like the existing protector - it's been quite fine IMHO, and no bubbles, very smoothly applied!
John
Bigjohn_S said:
so, what about applying a tempered glass protector? On top of the existing one? or remove the existing one?
I like the existing protector - it's been quite fine IMHO, and no bubbles, very smoothly applied!
John
Click to expand...
Click to collapse
I imagine it's gonna be a pain. With that light curve at the top, you'll have to be sure you get the right protector, and even so, it might just not cover the curved part at the top. The screen protector I got wasn't glass (harder plastic) and didn't have a curve to fit, so I think it was a G4 (didn't have one, myself, just assuming it didn't have a curved top) protector that was trying to be passed off... Research, research, research first!
The protector I ordered stops just past the top edge of the 'screen, below the speaker. we'll see how that goes. It's scheduled to arrive Friday...
I just received my IMAK glass screen protector. Purchased this on AliExpress. Here are some photos of it and how I installed it. I used the 3 stickers to make a hinge after it's positioned correctly. That way I just have to remove the backing and then stick it. I'll just seperate my review into pros and cons.
Pros:
-The screen protector fits nicely. I chose this one because it has the little speaker cut out on top.
-It feels good because it is glass.
-It protects the screen well because it is glass.
Cons:
-It is glass so it has some thickness to it.
-Holds fingerprints more than screen itself
-It has a little orange peel so it's not crystal clear. You can see in the picture of the reflection of the light that it looks a little muddy instead of mirror like.
Overall, it's good for the price, but not perfect. Personally I'm back and forth between glass and film screen protectors. I'll give this a try for a few weeks and then make a final decision.
https://flic.kr/p/YVQY5o https://www.flickr.com/photos/[email protected]/
https://flic.kr/p/YiqUeK https://www.flickr.com/photos/[email protected]/
https://flic.kr/p/YiqRJz https://www.flickr.com/photos/[email protected]/
https://flic.kr/p/ZgR8h3 https://www.flickr.com/photos/[email protected]/
https://flic.kr/p/Zfqq6y https://www.flickr.com/photos/[email protected]/
https://flic.kr/p/ZfqmJd https://www.flickr.com/photos/[email protected]/
https://flic.kr/p/YVQPHJ https://www.flickr.com/photos/[email protected]/
Those guiding stickers are ingenious, never seen them before and the idea is just so simple and clever!!
Perfect, I know what I have to do when my phone and Nillkin protector arrive.
Thanks for sharing.
That is a lot nicer than the Riffue Tempered Glass screen protector I bought on Amazon. This one is thin and has a good height but is several mm too narrow, it doesn't even cover the LCD display let alone the entire screen/glass.
the one i order covers like half of the screen lmao wtf
just ordered one like yours.
I had one similar too this, but the dust collected over front camera under the glass.
It has some glue on it, does this IMAK one used static?
Here is a link to the one i bought.
I tried many different ones but for me this is the best.
The coating is very good against fingerprints. It fits perfect on the screen.
The sides of the screen are a little bit curved down which is good for the dust.
Updated link https://www.aliexpress.com/item/Ima...lgo_pvid=6f18e507-ed27-486a-869e-418c35f3a452
dewingerd said:
Here is a link to the one i bought.
I tried many different ones but for me this is the best.
The coating is very good against fingerprints. It fits perfect on the screen.
The sides of the screen are a little bit curved down which is good for the dust.
https://www.aliexpress.com/snapshot/0.html?spm=a2g0s.9042647.0.0.JDCsAY&orderId=87369620878335&productId=32835736602
Click to expand...
Click to collapse
The link you've sent is private, I think we can't view it.
kurtextrem said:
The link you've sent is private, I think we can't view it.
Click to expand...
Click to collapse
Try this one : https://www.aliexpress.com/item/Ima...lgo_pvid=6f18e507-ed27-486a-869e-418c35f3a452
Do it sticks in all the area? or only in borders?
Thanks
DeividMS said:
Do it sticks in all the area? or only in borders?
Thanks
Click to expand...
Click to collapse
All the area.
Got the IMAK today and it is on and I LOVE it!!
Like there is no screenprotector there at all.
Will purchase some more rightaway.
EDIT: Never seen something fit so well!!
Dust2Dust said:
Got the IMAK today and it is on and I LOVE it!!
Like there is no screenprotector there at all.
Will purchase some more rightaway.
EDIT: Never seen something fit so well!!
Click to expand...
Click to collapse
I agree, this is the best screenprotector i have ever bought. It fits perfect and the coating feels the same as on the original screen :good::good:
Just wanted to echo everyone else about how great the Imak full coverage screen protector is. I went through four different screen protectors so far (unknown brand thin plastic one, MOFI tempered glass, another MOFI tempered glass, and finally the IMAK full coverage)
The thin plastic one came bundled with the phone and would scratch if you so much as raised your voice at it. Placed it on just as a temporary protector while waiting for the others to come from Aliexpress. It just barely covered the display and left about 1.5mm of space on the edges. The phone was accidentally smacked out of my hand once and landed on a sandy floor face down, which I later discovered upon removal of the screen protector had caused a small chip on the screen near the edge, so the protector might have absorbed some of the impact.
The first MOFI tempered glass I got was a "full coverage" one, but it arrived with notches cut out on the bottom where the proximity sensor and front camera are. The worst thing about this one was that it only had adhesive on the edges, so there was a really distracting and noticeable rainbow effect (newton rings) in the middle of the screen.
The second MOFI tempered glass was also full coverage, and this time it didn't have notches at the bottom, just a hole cutout where the proximity sensor is located. The adhesive type was the same as the previous one, edge only, resulting in the newton ring effect. It also mysteriously cracked for no reason.
The one I have on currently is the IMAK full coverage screen protector. Indisputably the best out of all of them, the protector fits exactly over the entire front glass, and instead of cutout holes at the bottom, the chin at the bottom is fully glass, blackened except for where the proximity sensor and front camera are. Full adhesive all throughout means there is no rainbow effect, and the LED notification light is even tinted slightly so that it blends in with the chin, and is invisible until it turns on! The only flaw about this screen protector (yes, there is one) is that the area underneath the front camera is too thin to apply adhesive, so as a result there's a tiny gap between the glass and phone that can let in dust after a while. The dust does not seem to affect the front camera, and I never take selfies anyway, but I have yet to figure out a good way to get the dust out of there.
I have never had a screen protector fit this perfectly, even for phones other than the Mi Mix 2. Most other screen protectors have cutouts for the proximity sensor/front camera/both, but this one blends in so well that it feels like it's not even there.
Does anyone know if this protector has a dot matrix on the screen (tiny dots that reflect)? I purchased a Misha 3D protector from Amazon which looks identical to this, and it's great except for the grid of dots across the screen.
dodgyc said:
Does anyone know if this protector has a dot matrix on the screen (tiny dots that reflect)? I purchased a Misha 3D protector from Amazon which looks identical to this, and it's great except for the grid of dots across the screen.
Click to expand...
Click to collapse
When I tried it there were no dots, just very reflective and had a weird smudge pattern going on which ruined it.
The flossmall one posted elsewhere is so much better.
Lol those kind of screen protectors damn sucks, they are not full glue, so that make lot of reflections. The nillkin (regular tempered glass, full glue, no black borders), is perfect and cover all the display... So why buy this imak piece of ****?
Zedramus said:
Just wanted to echo everyone else about how great the Imak full coverage screen protector is. I went through four different screen protectors so far (unknown brand thin plastic one, MOFI tempered glass, another MOFI tempered glass, and finally the IMAK full coverage)
The thin plastic one came bundled with the phone and would scratch if you so much as raised your voice at it. Placed it on just as a temporary protector while waiting for the others to come from Aliexpress. It just barely covered the display and left about 1.5mm of space on the edges. The phone was accidentally smacked out of my hand once and landed on a sandy floor face down, which I later discovered upon removal of the screen protector had caused a small chip on the screen near the edge, so the protector might have absorbed some of the impact.
The first MOFI tempered glass I got was a "full coverage" one, but it arrived with notches cut out on the bottom where the proximity sensor and front camera are. The worst thing about this one was that it only had adhesive on the edges, so there was a really distracting and noticeable rainbow effect (newton rings) in the middle of the screen.
The second MOFI tempered glass was also full coverage, and this time it didn't have notches at the bottom, just a hole cutout where the proximity sensor is located. The adhesive type was the same as the previous one, edge only, resulting in the newton ring effect. It also mysteriously cracked for no reason.
The one I have on currently is the IMAK full coverage screen protector. Indisputably the best out of all of them, the protector fits exactly over the entire front glass, and instead of cutout holes at the bottom, the chin at the bottom is fully glass, blackened except for where the proximity sensor and front camera are. Full adhesive all throughout means there is no rainbow effect, and the LED notification light is even tinted slightly so that it blends in with the chin, and is invisible until it turns on! The only flaw about this screen protector (yes, there is one) is that the area underneath the front camera is too thin to apply adhesive, so as a result there's a tiny gap between the glass and phone that can let in dust after a while. The dust does not seem to affect the front camera, and I never take selfies anyway, but I have yet to figure out a good way to get the dust out of there.
I have never had a screen protector fit this perfectly, even for phones other than the Mi Mix 2. Most other screen protectors have cutouts for the proximity sensor/front camera/both, but this one blends in so well that it feels like it's not even there.
Click to expand...
Click to collapse
After putting the screen protector on, I take a toothpick and put some glue from a Pritt-stick in the little gap underneath the camera. Not much, just enough to close the gap. When it has dried you can color it with a black whiteboard marker if you want. When you remove the screen protector you can easily rub it off. Works great for me :good:
Thanks!
Anyone tried these?
https://www.aliexpress.com/store/pr...Front-2PCS-Back-Soft/1879465_32831400367.html
Looking to buy this phone, any new news on protectors, or is IMAK our best option?
Thanks
can anyone suggest a tempered glass screen protector that works good and does not interfere with the fingerprint sensor? I purchased one and although it does fit perfectly and works well, the screen protector is thick enough that it interferes with the fingerprint sensor, it basically is too thick and when touching the sensor it only reads a partial fingerprint unless I press on it really hard to squish my finger in there.... anyone using one that is thinner or maybe the hole for the sensor is larger and not having this issue?
you got to change the temperglass
mcerk02 said:
can anyone suggest a tempered glass screen protector that works good and does not interfere with the fingerprint sensor? I purchased one and although it does fit perfectly and works well, the screen protector is thick enough that it interferes with the fingerprint sensor, it basically is too thick and when touching the sensor it only reads a partial fingerprint unless I press on it really hard to squish my finger in there.... anyone using one that is thinner or maybe the hole for the sensor is larger and not having this issue?
Click to expand...
Click to collapse
i had that issue so i replace with one which doesn't obstruct my finger print sensor. only drawback is that the temper glass will not provide full protected coverage like the one you have.
The Ringke Invisible Shield is what I am using. No issues with the fingerprint sensor. Have used Ringke products before and not had any issues.
I got an AVODA branded one free with my G6, from B&H Photo/Video. Haven't used it yet. I'm still rocking the plastic one that comes with the phone, the piece that has a white tab at the lower left corner. Once that looks heavily scratched to me, or is just about ready to pop off from another trip to a pants pocket, I'll put on the tempered glass protector.
Installed this a few days ago:
SPARIN Moto G6 Screen Protector, [NOT for G6 Play & G6 Plus] Tempered Glass [Leeway for Case] [Full Coverage] [Bubble Free] Screen Protector for Moto G6- Black
happy with it so far, although thumb taps do sound noticeably, at least at first, louder than the Nilkin tempered glass I used on my G4.
I've had this protector on for 3 months. I'm very pleased with it. It doesn't interfere with the case or the fingerprint sensor. The cutout is precise around the earpiece, camera and sensors. I would recommend this protector.
[4 Pack] MOTO G6 Screen Protector, SPARIN Tempered Glass Screen Protector for MOTO G6, Covers Viewable display Only with Anti-Scratch/Response Quickly/Easy Installation/Bubble Free, 5.7 inch https://www.amazon.com/dp/B079C9J2GG/ref=cm_sw_r_cp_taa_P770BbN75BHD9
I use Supershieldz
It doesn't have any space on both sides; however, you must install exactly on the center or the viewing areas are not fully covered.
So far I am satisfied though it has very little touch degradation.
doctazz said:
I got an AVODA branded one free with my G6, from B&H Photo/Video. Haven't used it yet. I'm still rocking the plastic one that comes with the phone, the piece that has a white tab at the lower left corner. Once that looks heavily scratched to me, or is just about ready to pop off from another trip to a pants pocket, I'll put on the tempered glass protector.
Click to expand...
Click to collapse
same here, I debated ordering up a tempered glass plate, but decided to wait and see how the film does first. I've had good luck with SuperShieldz brand. I have a film-type protector on my S7, which is basically bulletproof as far as scratches and dings, but I don't care for the faintly rubbery-texture it gives to the screen.
Which one do you recommend for the S10e? Right now I'm still using the default protector which was applied by Samsung, but I don't really like it.
i ordered one on ebay but i have a feeling it's flat not edge to edge full cover for 10e. They use generic photoshopped stock photo for all 3 models and claim it's curved. I think 10e has 2.5D edge. Not completely flat. I'm also using the garbage thin film they included. For $800 scumsung could include high quality glass and case. I also ordered glass for rear cameras. Never seen or used one before. Not sure what to expect.
tried ESR tempered glass and MP mall tempered glass from amazon
both do not stick on side, ESR is off by like 0.75 mm because of 2.5D curve of glass, it does not stick on side. so dont waste your money on these two, i am still looking for one may be just a bit smaller than ESR.
temporarily ordering a film protector till i find a tempered glass which fits right.
I'm using the PureGear HD Clear Tempered Glass Screen Protector https://www.amazon.com/dp/B07P7S174H/ref=cm_sw_r_cp_apa_i_byaHCbZY5Q1N0
It only has adhesive on the edges so there is no bubbles. It is case friendly and is a decent alternative to the whitedome which remains the superior choice for the 2.5D screens.
It only has adhesive on the edges so there is no bubbles. It is case friendly and is a decent alternative to the whitedome which remains the superior choice for the 2.5D screens.
Click to expand...
Click to collapse
how is touch sensitivity and does is create rainbow effect like some tempered glass with adhesive on side do?
Keep in mind aftermarket screen protecters (especially glass ones) will have problems with the fingerprint reader.
Im using the samsung one for now until some testing and revising is done
No rainbow effect and if you increase touch sensitivity in the settings it works great. I have no real complaints.
which non-glass protector do you guys recommend?
destz0r said:
which non-glass protector do you guys recommend?
Click to expand...
Click to collapse
I am interested as well, tried both ESR screen protectors and they were both too small for the screen. doesn't look like there is a clear favorite right now
DSX2 said:
Keep in mind aftermarket screen protecters (especially glass ones) will have problems with the fingerprint reader.
Im using the samsung one for now until some testing and revising is done
Click to expand...
Click to collapse
That's only for bigger models. S10E finger scanner is on the side.
Sent from my SM-G970U1 using Tapatalk
Why is there a lip or Ridge around perimeter of screen of galaxy s10e
Does anybody know why there is a lip or Ridge around the edges of Galaxy S10e screen it's almost looks like a screen protector has been applied from the factory
willdogg78 said:
Does anybody know why there is a lip or Ridge around the edges of Galaxy S10e screen it's almost looks like a screen protector has been applied from the factory
Click to expand...
Click to collapse
Yes, that's exactly what you are seeing. The S10e does indeed have a factory installed plastic screen protector. You can really feel it around the camera as there's a cutout for the camera. I would expect it to scratch rather quickly, plus I don't think it provides nearly as much drop protection as a tempered glass one might.
I'm following along here hoping that there does wind up being an economical tempered glass screen protector that works well and doesn't life at the edges. Seems like this will be similar to my S7, where I was never really able to find something that works and just went naked.
Thank you for the response I've just been so confused with everyone saying the S10 and S10+ have one but not the S10e. I think you're right it is just a polyurethane plastic protector. And just a heads up I tried to apply a tempered glass protector over top of it and it definitely made it hard for the edges to stick.
willdogg78 said:
Thank you for the response I've just been so confused with everyone saying the S10 and S10+ have one but not the S10e. I think you're right it is just a polyurethane plastic protector. And just a heads up I tried to apply a tempered glass protector over top of it and it definitely made it hard for the edges to stick.
Click to expand...
Click to collapse
I had the same confusion. All of the media I've seen say the pre-installed one is only on the S10 and S10+, but if you look around the camera on the S10e, there's clearly a cutout that confirms there is a pre-installed screen protector on there. I'm still not exactly sure how to get it off. I picked around the edges a bit and nothing is coming up easily.
I'm not sure how well the edges of a tempered glass one will stick even if you took off the pre-installed one. I haven't seen any reports of an economical one that works yet. I think I'm going to be in the same boat as I am with my S7 and be forced to go without one.
Follow
DarkMage619 said:
I'm using the PureGear HD Clear Tempered Glass Screen Protector https://www.amazon.com/dp/B07P7S174H/ref=cm_sw_r_cp_apa_i_byaHCbZY5Q1N0
It only has adhesive on the edges so there is no bubbles. It is case friendly and is a decent alternative to the whitedome which remains the superior choice for the 2.5D screens.
Click to expand...
Click to collapse
If anyone looking for decent glass. This brand is good to go, but expensive. Might wait out a little.
Sent from my SM-G970U1 using Tapatalk
my factory installed screen protector is starting to show some scratches and wear. Getting near desperate trying to find a good affordable screen protector for the s10e
I ordered an Alinsea glass protector from amazon, sounds like a knock off of a Whitestone from their description. It doesn't have a cut out for the front facing camera, which is great, as a cut out just seems to collect pocket lint. I have not received it yet.
1
Tapatalkkal küldve az én SM-G970F eszközömről
freddie813 said:
I ordered an Alinsea glass protector from amazon, sounds like a knock off of a Whitestone from their description. It doesn't have a cut out for the front facing camera, which is great, as a cut out just seems to collect pocket lint. I have not received it yet.
Click to expand...
Click to collapse
I got one. First time doing an install of this type and given the barebones installation tools provided, it was above average difficultly. First one ended up with bubbles.