Hi, I tried to upgrade my SM-G920F from XtreStoLite 2.4 (5.1.1) to 3.0 (MM) Final.
So I put the rom + and aroma add-on in the internal memory and entered download mode.
I tried to flash the new MM Bootloader and MM modem through odin 3.10.7 , odin said "success"
but when odin tried restart I got stuck on the samsung bootup animation. I cant proceed to twrp recovery and i cant boot the the system at all.
all i can do is boot back to download mode.
have I done something wrong?
Related
Hi all, my galaxy s wont go past the boot screen. I am rooted with cf-root and I flashed a custom rom (miui) with Rom Manager. Then I wanted to go back to previous rom so i flashed CWM recovery backup and when it was finished it just froze on startup screen. I can still boot into recovery mode and download mode but when i boot to recovery mode is says "E:unknown volume for path". and now I also tried to flash stock gingerbread firmware with odin 1.85 but keeps failing.
Please help, dont know what else to do
Update
marius.jd said:
Hi all, my galaxy s wont go past the boot screen. I am rooted with cf-root and I flashed a custom rom (miui) with Rom Manager. Then I wanted to go back to previous rom so i flashed CWM recovery backup and when it was finished it just froze on startup screen. I can still boot into recovery mode and download mode but when i boot to recovery mode is says "E:unknown volume for path". and now I also tried to flash stock gingerbread firmware with odin 1.85 but keeps failing.
Please help, dont know what else to do
Click to expand...
Click to collapse
Ok so now its worse. after I tried to flash firmware with odin, it just shows a picture with cellphone and pc and I cant boot into recovery and if i connect it to the pc when in download mode it says "USB device not recognized".
do not switch your phone when that logo show up on your screen,but try to reconnect your cable without swith off your phone and flash stock firmware with odin
Sent from my GT-S5360 using xda app-developers app
hello everyone...i have bought galaxy s6 g920f and i decided to install twrp 2.8.7.2 on stock 5.1.1 to take a backup of stock rom before installing any other rom and after i have take the backup i pressed on reboot system and then the keep rebooting and showin (samsung galaxy s6)logo only and doesn't boot up but i can go to dowload mode and recovery...then i tried to restore the back up which i had take but now to stuck on samsung logo without restarting and when trying to enter recovery it shows (recovery is not seandroid enforcing)
It's in bootloop. Just download the image, go into download mode and flash it via Odin.
Rakcoon said:
It's in bootloop. Just download the image, go into download mode and flash it via Odin.
Click to expand...
Click to collapse
thank u....i have resolved the problem by doing the installing of twrp process all over again but with installing unikernel before boot up the device
What happened
i cant access recovery mode on my s7562:crying:
i have to flash Stock Hun Firmware first using odin h.st/download/00169/do72/S7562XXALJ4_S7562OXXALJ3_S7562XXLJ3_HOME.tar.7z
Then flash cwm through odin
Then flash twrp https://ny1.androidfilehost.com/dl/Z...WRP28+f2fs.zip through odin
Installed RC2 package with TWRP
s7562 fast and every thing working
when i flashed 0160305-UNOFFICIAL-kylessopen-physical-primary
without wiping dalvik ,system,data
opend file manager it shows no internal & external memory
again flashed Stock Hun Firmware first using odin
cant boot and
stuck on samsung logo
i flashed this stock rom http://dl.sammobile.com/J19cRVsrLCoo...JVBMJ2_THR.zip via odine
http://dl.sammobile.com/Odin3_v3.10.7.zip
same problem stuck on samsung logo
i cant access recovery mode on s7562
Download links:
Stock Hun Firmwareh.st/download/00169/do72/S7562XXALJ4_S7562OXXALJ3_S7562XXLJ3_HOME.tar.7z
Odin v3 for Windows http://fs1.d-h.st/download/00169/ZKYe/Odin3_GT-S7562.zip
Recovery - CWM (flash using Odin) https://qc3.androidfilehost.com/dl/...16/24438995911969093/kyleopen-cwm5-v3.tar.md5
Recovery - TWRP https://tx1.androidfilehost.com/dl/...603/24352994023706353/recoveryTWRP28+f2fs.zip
I have already discussed this issue here
http://forum.xda-developers.com/showpost.php?p=65724944&postcount=1703
http://forum.xda-developers.com/showpost.php?p=65731467&postcount=1705
Tried flashing latest stock firmware using odin. It says 'PASS' but phone still stucked on boot image. Cant even get to stock recovery mood but download mood is working fine.
How to fix this??
I recently purchased a Samsung Galaxy S5 SM-G900P 16GB KLTESPR sprint phone.
The day I purchased it, it had the QD1 Marshmallow firmware on it.
I downloaded the QD1 firmware & OK4 firmware from SamMobile.
I Odin the phone to the QD1 firmware to make sure the firmware download was clean from SamMobile and everything worked.
Phone booted up with the Samsung logo and sprint boot animation logo with sound. Working.
So, I downgraded the firmware from QD1 Marshmallow to OK4 Lollipop firmware on it to use the MOAR 7.1 Lollipop killer ROM on it.
It had sucessfully Odin to the OK4 Lollipop firmware and it booted up with the Sprint Logo animation logo with the sound, I then flashed the TWRP 3.1.1-0 recovery on it.
I tried to install MOAR 7.1 on it using TWRP but it wasn't working because of the Aroma Installer...
I researched the MOAR 7.1 ROM forum and saw users were successfully installing the ROM using the PhilzTouch Recovery.
I downloaded the latest version of PhilzTouch for the phone (philz_touch_6.57.8-klte) and flashed the recovery to the phone.
Once the recovery installed successfully, I booted into PhilzTouchRecovery and flashed MOAR 7.1, success.
I got bored of the MOAR ROM and decided to try out the Slim ROM Marshmallow Android 6.0.1.build.2.1 ROM (Slim-kltespr-6.0.1.build.2.1-STABLE-20170330-0013)
I wanted to start out fresh though, so..
I Odin the phone back to the QD1 firmware and let the phone boot up and noticed something strange...the Spring boot animation logo wasn't showing.
It was just only the Samsung Logo.
The phone booted though into the setup wizard, so I just kept going forward with the setupwizard and noticed that the setup wizard asked what I would like to name the phone
and I saw that it had MOAR Galaxy S5 as the name on there?!? after the QD1 firmware marshmallow Odin?!?
I re-flashed the TWRP recovery and booted into recovery.
I wiped everything;
Dalvik/ART Cache; System; Data; Internal Storage; Cache
booted back into download mode
Odin the QD1 firmware again.
Still no sprint boot logo animation...but this time the setupwizard asked what I wanted the phone to be named and it back to the normal "Galaxy S5".
I'm kind of worried because the phone isn't showing the Spring boot logo animation after Odin, just only the Samsung logo.
By the way, I re-Odin the phone back to the OK4 firmware and still no sprint logo animation.
I re-Odin to QD1 firmware again...and still no sprint logo animation.
Honestly, I really don't care about the sprint boot animation logo because everything is working and I plan to use this phone on Boost Mobile with 4GLTE.
But, could someone let me know if I should worry about the sprint boot animation logo not showing after a clean install of QD1 firmware Odin?
by the way....I currently have the Resurrection-Remix-LP-v5.5.9-20151122-kltespr ROM on it with the OK4 firmware and I also tried it with the QD1 firmware and all is working. I didn't really like the Slim 6.0.1 because I use the 'User Dictionary Manager' app that only works with Lollipop.
I'm in love with the Resurrection-Remix-LP-v5.5.9 rom.
I just don't have the phone currently connected yet, as I am tethering internet (Boost Mobile 3G) onto it with my Samsung Galaxy S3.
All help and replies are truly appreciated! Thank you.