I tried to install cwm in my phone with an app called fla**** but it fialed and my phone phone was stuck on kernel logo.....then i somehow got the drivers in my computer and flshed cwm in my phone...then i tried to flash stock rom which i had dumped and saved in my computer...but it gave me status 0 erro...then i tried to port a rom (lewa os and this some is made for my clone mobile which is zte v818) and flashed it and it was successfully flashed but still my phone is stuck on kernel logo...now tell me guys what to do....how to get my phone back.....can sp flash tool method help me...if yes then tell me the whole procedure because i do not know how to flash roms using sp flash tools.....my phone is micromax a74 with mediatek mt6572 chipset
Every time I try to flash CWM into Huawei G700-U10 (MT6589) I got into bootloop thanks to the tutorial about how to restore it.
I tried every thing like (mobile uncle , MTK Droid Tools , SP Flash tool) and I did all the steps I found on the internet and tested many CWM recoveries downloaded for the G700 or even I ported from the stock recovery.
when I flash the CWM it stop booting until I reflash the stock recovery.
Does any one know How to solve this and get any custom recovery into this phone .
thanks ,
mlotfi said:
Every time I try to flash CWM into Huawei G700-U10 (MT6589) I got into bootloop thanks to the tutorial about how to restore it.
I tried every thing like (mobile uncle , MTK Droid Tools , SP Flash tool) and I did all the steps I found on the internet and tested many CWM recoveries downloaded for the G700 or even I ported from the stock recovery.
when I flash the CWM it stop booting until I reflash the stock recovery.
Does any one know How to solve this and get any custom recovery into this phone .
thanks ,
Click to expand...
Click to collapse
http://customizegadget.blogspot.com.es/2014/05/huawei-g700-u10-how-to-install-cwm.html
xals1997 said:
http://customizegadget.blogspot.com.es/2014/05/huawei-g700-u10-how-to-install-cwm.html
Click to expand...
Click to collapse
i have exactly the same problem.Always entering bootloop whenever i install a CWM recovery.
Stuck at CWM everytime at booting.Flashed wrong CWM.img on lenovo a6000 plus cannot go further CWM recovery, it can also boot into stock recovery. Tried to install TWRP through adb but getting error DTB not found. installed CWM version 6.0.5.1 only for lenovo k30-T. Please help what should i do..??
Flash stock rom of lenovo with sp flash, do a imei back first with mtk tools..
Hello guys..okay so i hav mmx a106 phone...in which i tried flashing twrp recovery using flashify.
But when i boot into recovery there was micromax logo for some seconds nd den it rebooted...
Now everytym wen i boot into recovery jst mmx logo appears nd den it reboots...
Nw d prblm is hw to get into recovery mode..or hw can i go my factory recovery mode instead of any custom recovery. Its being a biy problamatic so guyss plzz help me
i_Amlesh said:
Hello guys..okay so i hav mmx a106 phone...in which i tried flashing twrp recovery using flashify.
But when i boot into recovery there was micromax logo for some seconds nd den it rebooted...
Now everytym wen i boot into recovery jst mmx logo appears nd den it reboots...
Nw d prblm is hw to get into recovery mode..or hw can i go my factory recovery mode instead of any custom recovery. Its being a biy problamatic so guyss plzz help me
Click to expand...
Click to collapse
Greetings,
Thank you for using XDA Assist.
To best assist you with your issue, I'm going to move this thread to your device's Q&A section.
You should receive expert advice there.
Good luck!
i_Amlesh said:
Hello guys..okay so i hav mmx a106 phone...in which i tried flashing twrp recovery using flashify.
But when i boot into recovery there was micromax logo for some seconds nd den it rebooted...
Now everytym wen i boot into recovery jst mmx logo appears nd den it reboots...
Nw d prblm is hw to get into recovery mode..or hw can i go my factory recovery mode instead of any custom recovery. Its being a biy problamatic so guyss plzz help me
Click to expand...
Click to collapse
Okay so you are unable to boot your device in recovery mode. You can download stock recovery or any custom recovery for your device and then again flash it using flashify. Hope it will work. If its not working let me know by replying. :good:
Flashify is unable to flash stock n custom recovery in my mmx a106. I tried it but i got same issue as amlesh
Whats you need to do is to install sp flash tool on your pc and the stock rom for your mmx unite 2 lollipop .then install sp flash tool and and execute the program ...then there will be a command 'Scatter file' ....click on that and open that in fhe Firmware folder of your Stock Rom ....the connect ur device using usb cable and then click download in the sp flash tool......after completing that disconnect ur devices and reboot it....
Wrong Choice!
Flashify and Twrp are both bad for Unite 2!
You would have flashed the Philz Recovery with SP FLash tool and then flashed the TWRP recovery using it!
Now Still you can do the same
Just google philz recovery and you will get a detailed answer there!
If you like this hit THANKS
i_Amlesh said:
Hello guys..okay so i hav mmx a106 phone...in which i tried flashing twrp recovery using flashify.
But when i boot into recovery there was micromax logo for some seconds nd den it rebooted...
Now everytym wen i boot into recovery jst mmx logo appears nd den it reboots...
Nw d prblm is hw to get into recovery mode..or hw can i go my factory recovery mode instead of any custom recovery. Its being a biy problamatic so guyss plzz help me
Click to expand...
Click to collapse
Your phone appears to have gone into a bootloop.
Here is what you can do as you can't get into the system and reboot into recovery mode. Just confirm if you are doing it the correct way.
To enter Recovery mode - turn phone completely OFF.
Recovery = Vol Down + Power (hold both down for several seconds)
This button press procedure varies with each device/model of phone.
Click to expand...
Click to collapse
If the above steps failed, proceed down below.
Things you will need:
1) USB to PC connecting cable
2) A PC where you can download one of the tools to recover (MTKDroid/SpFlash along with the device specific Scatter file)
3) USB drivers installed on your PC to connect with your phone
4) Patience to read references and follow the steps to flash recovery using Tool
CAUTION: Do steps at your own risk. Do not hesitate to ask if not sure. Post restoring recovery successfully, if you plan to flash a Custom ROM, suggest taking a backup from device using TWRP OR atleast the NVRAM using MTKDroid Tool so that you do not run into issues resulting with SIM showing No Network/Service.
Click to expand...
Click to collapse
References: (Some of the community folks have done the hard work to publish these)
SP FLASH TOOL Tutorial to install TWRP / Custom Recovery
https://forum.xda-developers.com/k3-note/general/sp-flash-tool-tutorial-to-install-twrp-t3346041
Installing custom recovery using SP Flash Tool(COMPLETE TUTORIAL)
https://forum.xda-developers.com/k3-note/general/sp-flash-tool-tutorial-to-install-twrp-t3346041
[How to/MTK65xx] ROOT, Backup & Flash (MTKDroidTools, Spflashtool, CWM) [MTK Only]
https://forum.xda-developers.com/showthread.php?t=2730031
[HOW TO]Guideline / Install MTK drivers / How to Root / Flash a Rom / IMEI Restore
https://forum.xda-developers.com/elephone-p9000/how-to/how-to-guideline-install-mtk-drivers-t3344042
Ensure to have the latest versions of TWRP and the flash tools MTKDroid AND/OR SPFlash.
To let you know, I've used the recoveries viz. CTR, TWRP, CWM, Philz on MMX a106 and haven't experienced any issues at all. Neither have I had any issues with Flashify as reported by some. Anyways its a personal experience
NOTE: If the issue is already resolved by now, please help others know it with your fix.
Click to expand...
Click to collapse
Hope this helps, happy restoring
Finally, Thank if you feel helped.
Anyone can help me to create Custom Recovery for my phone Itel S11 Plus? (MT6580)
I tried a lot creating it such as port custom recovery, using auto recovery create tool for mtk device. But when i flashes the custom recovery with SP Flash Tool then reboot, It reboot straight to system. There is not recovery option
This is my boot.img and recovery. img
drive.google.com/open?id=15OHqhR_fAjHB5B9rXHnsI7ilfNwEMdwn
Thank a lot.
Help me
Please help me. I need it today
I guess i can!
But need time..do you still need it?
yess pls