Hello
As some people i Bricked my Motorola Xt1068 (Moto g 2nd gen)Indian varient.
It gets stuck in boot image.
I am able to access the boot loader
But while flashing firmwares like
1) Blur_Version.24.41.34.titanretaildsds.retaildsdsall.en.03.zip
2) RETAILDSDSALL_XT1068_4.4.4_KXB21.85-14_cid7_CFC_SVC.xml.zip
The devices shows error Preflash validation failed right after the first command (fastboot flash partition gpt.bin)
I also tried RSD lite but my device is not getting detected.(Although i have Motorola device drivers installed).
I also tried the SD card method but no good.
Please please help.
Hello and thank you for using XDA Assist,
please create an account and create a thread here:
G 2014 Q&A, Help & Troubleshooting
Kind regards and good luck
Trafalgar Square
XDA Assist
Related
friends help me out!
i just unlocked my bootloader and rooted my moto g xt1033 and
installed twrp and started my device in fast boot mode and tried to install "XT1033_Retail_Asia_502_Optimized_v1.3.zip
" and wiped all data except internal storage and otg.
But installation is failed and my device is stucked at warning screen of bootloader unlocked !
please help me out i don't know what to do and also don't know what happend to my device.
Aitkotw said:
friends help me out!
i just unlocked my bootloader and rooted my moto g xt1033 and
installed twrp and started my device in fast boot mode and tried to install "XT1033_Retail_Asia_502_Optimized_v1.3.zip
" and wiped all data except internal storage and otg.
But installation is failed and my device is stucked at warning screen of bootloader unlocked !
please help me out i don't know what to do and also don't know what happend to my device.
Click to expand...
Click to collapse
Hello and thank you for using XDA Assist.
Sorry to hear about your trouble but fortunately there is an XDA area dedicated to the Moto G at http://forum.xda-developers.com/moto-g which would be a good starting place. I suggest you post your question with all relevant details in the friendly Q&A forum there at http://forum.xda-developers.com/moto-g/help where the experts familiar with your device will be best able to guide you.
Good luck!
Hello everyone!
Today I was trying to update my Motorola XT910 to the cm-13.0-20160304-NIGHTLY-umts_spyder version with the safestrap app installed on te cellphone, but it was always failing...
Then I trid to install the cm-11-20150901-SNAPSHOT-XNG3CAO3G1-spyder version, but result was the same.
After trying several times, I ended up in the Encryption unsuccessful LOOP...
I've then tried to install retail versions with RSD Lite, but could never pass the first step of the process when I hit the start button... I got an error saying:
Failed flashing process. 1/9 flash logo.bin "logo.bin" -> USB error ocurred while reading/writing.
I was using the following file:
SPDREM_U_01.6.7.2-180_SPU-19-TA-11.6_SIGNEuropeAustraliaEMEA_USASPDRICSRTGB_HWp2b_Service1FF_fastboot
Can anyone help me?
I'm a completely noob and have no idea of what is happening...
How can I recover my phone?
Thanks for your help!
Hi,
Try posting your question here:
Droid RAZR Q&A, Help & Troubleshooting
The experts there may be able to help.
Good luck!
I have an LG V400 which I successfully rooted using KingRoot. I installed Flashify on it and flashed a TWRP image from techbeasts.com. I then used Flashify's built in "Boot into Recovery" option. On boot,
Code:
ERROR: Boot certification verify
was written in small print at the top left corner of the tablet. It was stuck there for about 15 minutes, until I hard rebooted it and it came to the lock screen. However, I can not reset the tablet to factory defaults (it need to reboot to do that), nor do I have a backup image of the tablet before the failed installation. If I try to reboot the device, it shows the same error on boot until you hard reboot it. How can I get out of this? (preferably reset the tablet to factory defaults).
Hello and thank you for using XDA Assist,
please ask in our Android Q&A section:
Android Q&A, Help & Troubleshooting
The experts there should be able to help you.
Kind regards & good luck
Trafalgar Square
XDA Assist
Hello, I want to unlock the bootloader for my zte grand x2 (z850) so i can root my device.
I have tried unlocking the adb fastboot way but my phone won't go into bootloader so that didn't work.
I have also tried kingroot, kingoroot, iroot, and rootgenuis. Now this semi worked because with bot iroot and kingroot i got a succeeded when rooting but when the phone reboots it gets stuck at the booting process with a black screen and red led. After this happens the only way to get my phone back up is to wipe data and cache in phone recovery.
So i can only think that its becaue of the bootloader, any help would be greatly appreciated.
Hello and thank you for using XDA Assist,
please ask in this section:
Android Q&A, Help & Troubleshooting
The experts there will be able to help you.
Kind regards & good luck
Trafalgar Square
XDA Assist
I have tried several 'solutions' for resolving boot loop issues. My MT6582 keeps crashing. Every 2-5 days I have to re-flash the stock ROM and start all over again. I've tried different scatter files and using SP Flash Tool to flash them to the phone but the tool either gives me an error or the phone boots back into boot loop. I've tried: MTK droid Tools, Mobile Uncle, MagicBox, TWRP, CWM, PHILZ......following all of the tutorials and guides to the letter but, so far, nothing has worked.....I've tried sideload. I've tried creating a custom ROM using kitchen.....If there's a 'possible fix' out there on the web, I think I've tried it. PLEASE, please, please can someone help me with this problem? I'm sick of flashing my phone and reloading all the apps, setting preferences and then having it crash! At the very least I should be able to create a scatter file that has my apps, userdata and preferences that I can flash when needed. (Teach me how to do that!)
The phone is a Blu Studio 5.0 C HD (Mediatek 6582) with KitKat 4.4.2 (Would like to upgrade to 6.0 but not imperative at this stage of the game.)
Hello and thank you for using XDA Assist,
please post your question in our Android Q&A section:
Android Q&A, Help & Troubleshooting
The experts there should be able to help you.
Kind regards & good luck
Trafalgar Square
XDA Assist