Please help
I have a gionee pioneer p3 and I got it stucked in a boot loop while trying to install a custom font after rooting it with no custom recovery tool installed. I downloaded the phone's stock firmware from needrom but discovered the firmware for gionee p3 on that site is corrupt as I couldn't extract the zip file to my desktop. I downloaded a custom rom and after flashing it using SP flash tool, my phone won't even boot anymore, the phone just remains dead like there's no battery in it. But when I connect to sp flash tool, it recognises my phone so I think its a firmware issue or a problem with the bootloader. I want to know if its possible to copy the firmware from a working gionee p3 and use it to flash my bricked phone, if it is, please I need guide on how to do this cos I really want my phone back to its stock rom. If not, any other solution will be much appreciated. I need my phone up and running again please help.
As you mentioned, the ROM you downloaded earlier might be corrupted. Since flash tool recognizes your phone, i think you should try to download a new firmware and try to flash it via flash tool.
Imhuurd said:
As you mentioned, the ROM you downloaded earlier might be corrupted. Since flash tool recognizes your phone, i think you should try to download a new firmware and try to flash it via flash tool.
Click to expand...
Click to collapse
Thats my problem, i cant find the firmware anywere else as every other site still links me to the same file i downloaded earlier which is corrupt. That is why i want to know if its possible to copy the firmware from a working phone and use it to flash the dead phone or if i can be taught how tocreate a scatter file for one of the custom roms i have, i'l be grateful. Getting the firmware is my biggest problem. Thanks for your time and help.
Hello,
I have a Sprint Note Edge (SM-N915P) and I honestly don't like this lollipop update. I tried flashing with Odin back to KitKat but no luck and research on google says bootloader is the problem. Can anyone help me ? Any information on how to unlock this bootloader or just any method on how to downgrade back to kitkat.
I still need help!! Please anyone?
Thanks in Advance.
kezzmo said:
Hello,
I have a Sprint Note Edge (SM-N915P) and I honestly don't like this lollipop update. I tried flashing with Odin back to KitKat but no luck and research on google says bootloader is the problem. Can anyone help me ? Any information on how to unlock this bootloader or just any method on how to downgrade back to kitkat.
Thanks in Advance.
Click to expand...
Click to collapse
You need to flash the apropriate KitKat Bootloader for your Phone through Odin. By apropriate I mean 4.4.4 Bootloader for SM-N915P. You can search Google or download your Firmware from sammobile.com or sth. Then in Odin > BL > select your downloaded Bootloader and after it's done you can flash any KitKat firmware or ROM from recovery.
Hope it helps
kain1979 said:
You need to flash the apropriate KitKat Bootloader for your Phone through Odin. By apropriate I mean 4.4.4 Bootloader for SM-N915P. You can search Google or download your Firmware from sammobile.com or sth. Then in Odin > BL > select your downloaded Bootloader and after it's done you can flash any KitKat firmware or ROM from recovery.
Hope it helps
Click to expand...
Click to collapse
Hello, Thanks for this information. I have the 4.4.4 Firmware for SM-915P downloaded but when flashing with Odin i normally use AP or PDA to flash, i never thought of using BL(bootloader) to flash the firmware. I'm gonna try using your suggested method once i get back home and i would post a reply back to you. I truly appreciate it.
kezzmo said:
Hello, Thanks for this information. I have the 4.4.4 Firmware for SM-915P downloaded but when flashing with Odin i normally use AP or PDA to flash, i never thought of using BL(bootloader) to flash the firmware. I'm gonna try using your suggested method once i get back home and i would post a reply back to you. I truly appreciate it.
Click to expand...
Click to collapse
NO YOU SHOULDNT. Dude you gotta flash the BOOTLOADER FIRST or it's NOT GOING TO WORK. Open your firmware with WINRAR or sth like that, find the bootloader, boot.img or sth flash through BL and THEN flash firmware through AP / PDA. You had it right all along, but you need to flash KITKAT Bootloader first
kain1979 said:
You need to flash the apropriate KitKat Bootloader for your Phone through Odin. By apropriate I mean 4.4.4 Bootloader for SM-N915P. You can search Google or download your Firmware from sammobile.com or sth. Then in Odin > BL > select your downloaded Bootloader and after it's done you can flash any KitKat firmware or ROM from recovery.
Hope it helps
Click to expand...
Click to collapse
Hello again, I tried exactly what you told me to do but still says failed. I downloaded stock kitkat (4.4.4) Firmware, then in Odin > BL > and selected the 4.4.4 firmware. I've attached a picture.
But if you're just talking about just only SM-915P "bootloader" file for kitkat and not the actual full firmware, then it is not present on sammobile.com or on any place with google search. The only bootloader file i found was for the international version (SM-915F) http://forum.xda-developers.com/note-edge/development/n915f-kitkat4-4-4bootloader-tar-unlock-t3063928http://forum.xda-developers.com/not...15f-kitkat4-4-4bootloader-tar-unlock-t3063928, even XDA website don't have the bootloader for SM-915P. :crying:
I've been trying for weeks, trust me. And i feel like i've reached a dead end and stuck with lollipop OS that i don't like.
kain1979 said:
NO YOU SHOULDNT. Dude you gotta flash the BOOTLOADER FIRST or it's NOT GOING TO WORK. Open your firmware with WINRAR or sth like that, find the bootloader, boot.img or sth flash through BL and THEN flash firmware through AP / PDA. You had it right all along, but you need to flash KITKAT Bootloader first
Click to expand...
Click to collapse
Yes, i opened the firmware with WINRAR and no bootloader file present. I downloaded it from sammobile.com. Even after extraction no boot.img present in the file. Picture below.
You gotta go deeper...
kezzmo said:
Yes, i opened the firmware with WINRAR and no bootloader file present. I downloaded it from sammobile.com. Even after extraction no boot.img present in the file. Picture below.
Click to expand...
Click to collapse
The firmware file you've opened with winrar contains ANOTHER COMPRESSED FILE (the actual firware that's going to be flashed). You have to go deeper. Double-Click on that file ('blabla'.tar.md5). wait a while until you can see its contents in winrar and THERE YOU WILL FIND (among others):
* aboot.mbn
* NON-HLOS.bin
* rpm.mbn
* sbl1.mbn
* sdi.mbn
* tz.mbn
Extract all of the above files >
compress them in a .tar file using 7zip or another program >
flash ONLY THIS FILE through Odin | BL >
when its done flash firmware through AP / PDA
p.s. : If you cannot flash the .zip firmware then extract and flash the .tar.md5 file inside. AFTER you've flashed the bootloader
kain1979 said:
The firmware file you've opened with winrar contains ANOTHER COMPRESSED FILE (the actual firware that's going to be flashed). You have to go deeper. Double-Click on that file ('blabla'.tar.md5). wait a while until you can see its contents in winrar and THERE YOU WILL FIND boot.img. Extract just this file > flash ONLY THIS FILE through Odin | BL > when its done flash firmware through AP / PDA
p.s. : If you cannot flash the .zip firmware then extract and flash the .tar.md5 file inside. AFTER you've flashed the bootloader
Click to expand...
Click to collapse
I was so impatient that i opened up a new thread on how to extract a file with winrar. I feel so stupid now. I should have waited for a reply from you first. I guess we still learn everyday. I appreciate the time and effort you're putting in this thread to walk me through. I'm forever grateful and thank you so much. I will do exactly what you mentioned and post a reply afterwards on the result. Thanks again.
kain1979 said:
The firmware file you've opened with winrar contains ANOTHER COMPRESSED FILE (the actual firware that's going to be flashed). You have to go deeper. Double-Click on that file ('blabla'.tar.md5). wait a while until you can see its contents in winrar and THERE YOU WILL FIND (among others):
* aboot.mbn
* NON-HLOS.bin
* rpm.mbn
* sbl1.mbn
* sdi.mbn
* tz.mbn
Extract all of the above files >
compress them in a .tar file using 7zip or another program >
flash ONLY THIS FILE through Odin | BL >
when its done flash firmware through AP / PDA
p.s. : If you cannot flash the .zip firmware then extract and flash the .tar.md5 file inside. AFTER you've flashed the bootloader
Click to expand...
Click to collapse
Hello, OK, i did everything step by step as you instructed but it failed to flash the bootloader. I've attached a picture below to see everything. Am i missing anything?
kezzmo said:
Hello, OK, i did everything step by step as you instructed but it failed to flash the bootloader. I've attached a picture below to see everything. Am i missing anything?
Click to expand...
Click to collapse
yes you are...
inside the .tar file you created there is a folder that contains the actual files to be flashed. That's wrong. Don't compress a folder, just the files
kain1979 said:
yes you are...
inside the .tar file you created there is a folder that contains the actual files to be flashed. That's wrong. Don't compress a folder, just the files
Click to expand...
Click to collapse
Oh ok. i will try it again.
kain1979 said:
yes you are...
inside the .tar file you created there is a folder that contains the actual files to be flashed. That's wrong. Don't compress a folder, just the files
Click to expand...
Click to collapse
Now it says "ABOOT" . Is that right?
kezzmo said:
Now it says "ABOOT" . Is that right?
Click to expand...
Click to collapse
does it get stuck there? doesnt it go any further???
kain1979 said:
does it get stuck there? doesnt it go any further???
Click to expand...
Click to collapse
Just stuck there and wouldn't do anything.
kain1979 said:
does it get stuck there? doesnt it go any further???
Click to expand...
Click to collapse
Do you have any suggestions? Or can you link me to a kitkat bootloader i can download, like the one you use for yourself. I don't know if this is a Sprint note edge issue because all other variants of the note edge seems to downgrade back to kitkat.
Lollipop just have too many issues like the one you also posted about the phone heating up badly, that happens to my note edge too. Battery draining like no tomorrow, it's just ridiculous.
I just wanna go back to kitkat.
Thanks again.
okay so my Samsung tab3 lite was rooted but I did something and now it is stuck in CWM-based Recovery v6.0.4.8 and I have the basic android ROM downloaded on my computer and not sure how to fix this problem Is it possible for me to put the ROM on my sd card then install zip on my tablet? I have tired odin but it can never find my ROM
Any help would be amazing!
Hi, thank you for using XDA Assist. You are on the right track to Odin the stock firmware to get your device working again. But you need the stock firmware, not a rom zip. If you've downloaded the stock firmware it does download in a zip format but you need to extract that so you end up with a .tar.md5 file. Use that in Odin. Also see this, http://forum.xda-developers.com/galaxy-tab-3. It's the forum for the tab 3 and does have some information for the lite version.
jd1639 said:
Hi, thank you for using XDA Assist. You are on the right track to Odin the stock firmware to get your device working again. But you need the stock firmware, not a rom zip. If you've downloaded the stock firmware it does download in a zip format but you need to extract that so you end up with a .tar.md5 file. Use that in Odin. Also see this, http://forum.xda-developers.com/galaxy-tab-3. It's the forum for the tab 3 and does have some information for the lite version.
Click to expand...
Click to collapse
I have downloaded the firmware but odin does not see the firmware at all not sure what I am doing wrong but could I put the firmware on my sd card then put it in my tablet and install zip?
Have you extracted the firmware zip? Use winrar or 7-zip. You need to use a .tar.md5 file in Odin. That's what you'll get if you extract the stock firmware .zip. Use that in the PDA or AP slot in Odin, depending on what version of Odin you're using. See this, http://forum.xda-developers.com/gal...08-2013-odin-3-09-odin-1-85-versions-t2189539
jd1639 said:
Have you extracted the firmware zip? Use winrar or 7-zip. You need to use a .tar.md5 file in Odin. That's what you'll get if you extract the stock firmware .zip. Use that in the PDA or AP slot in Odin, depending on what version of Odin you're using. See this, http://forum.xda-developers.com/gal...08-2013-odin-3-09-odin-1-85-versions-t2189539
Click to expand...
Click to collapse
I got the md5 file and got it in odin and clicked start and then a couple minutes later it said failed and now my tablet only says "Firmware upgrade encountered an issue. Please select recovery mode in Kies & Try again" so I went to kies and went to Emergency Firmware Recovery tab under tools but it can not find my device
OK, XDA Assist is a forum to point you in the right direction and not to solve your issue. So I'd ask here, http://forum.xda-developers.com/galaxy-tab-3/help. But use the usb ports in the back of your computer, 2.0 and not 3.0, and try different usb cables. Odin can be finicky.
I tried to instell cyanogenmod n my phone, downloaded from the official site, once my twrp installed the package my phone presented a bootloop problem, i tried to update it using update.app of a official firmware but the combination of vol+vol-pow seems not to work, i even tried to extract images files from update.app using Huawei update extractor and then to flash them but nothing, I'm worried for the possibility ofa really serious problem, please help me.
Hello guys 2 days ago i root my phone with easyroot and then i flash g4 mode with flashfire. I got brick (SECURITY ERROR ) authentication 9. Anyway i tried to flash stock rom with kdz file but nothing always stuck at 9%. Only one way left to save my phone i guess. I must install with tot file but i cant find for H955. Can i install H950 tot file on my h955 ?
Thanks for reading