Database Info

[KERNEL][SOON] HakyKernel 3.1.2

Will be updated soon
Issues:
Settings app: closed automatically when activate Bluetooth.
Kernel information: still appear on 3.0.101, i guess modules of MoshKernel should be updated too.
Android rebooting each 10/15 minutes.
Wifi: not working.
Code:
[*]22/04/2015:
-initial build.
-I will make zImage and use as prebuilt kernel in my roms after add arch-capri drivers.

haky 86 said:
After done some google search about to find similar devices to our phone and some guys on Whatsapp group give me some useful information about Samsung Galaxy S Duos 2 that device share same broadcom chipshet but the kernel is more updated (3.4.5), so I decide to port this version to our phone Samsung Galaxy S2.
I start some tests witnout arch-capri drivers in kernel/samsung/3.4/arch/arm just to see if Android boot or not, the result was really fantastic so from today we can port 3.4 kernel without any problems.
Issues:
Settings app: closed automatically when activate Bluetooth.
Kernel information: still appear on 3.0.101, i guess modules of MoshKernel should be updated too.
Android rebooting each 10/15 minutes.
Wifi: not working.
Code:
[*]22/04/2015:
-initial build.
-I will make zImage and use as prebuilt kernel in my roms after add arch-capri drivers.
Click to expand...
Click to collapse
Okey. Is this for stock or asop based roms?

rs tony said:
Okey. Is this for stock or asop based roms?
Click to expand...
Click to collapse
for both roms :good::good:

thanks @haky 86
I think in future u make this phone work so much better than iphone6
your one of the best developer for this phone

SmzAmir said:
thanks @haky 86
I think in future u make this phone work so much better than iphone6
your one of the best developer for this phone
Click to expand...
Click to collapse
Sure once finish 5.1.1 i can recall other devs to share experience and make 3.4 work perfect:thumbup::thumbup:
Sent from my GT-I9105P using XDA Free mobile app

haky 86 said:
for both roms :good::good:
Click to expand...
Click to collapse
amazing work :good: only a question, i am a newbie on android so what will be the difference betwen them?

cracker12 said:
amazing work :good: only a question, i am a newbie on android so what will be the difference betwen them?
Click to expand...
Click to collapse
the differences are:
-roms will be more stable.
-kernel new and updated instead of old stock and slow 3.0.101.
-antutu test result about 13000 points with some fixes may get better result.
-fast booting.
-this version could be useful for android 6 when will out.

haky 86 said:
the differences are:
-roms will be more stable.
-kernel new and updated instead of old stock and slow 3.0.101.
-antutu test result about 13000 points with some fixes may get better result.
-fast booting.
-this version could be useful for android 6 when will out.
Click to expand...
Click to collapse
Thanks... Keep up

[*]23/04/2015:
-drivers are imported without problem.
-now i'm fix compilation errors to see if will done or not.

Hey u make this
It awesome
---------- Post added at 03:40 AM ---------- Previous post was at 03:37 AM ----------
Hope you will fixed the issues in future
Do it have enhanced gpu

Man, you do a lot of great work.

thanks guys but may i wil discontinued this project since no devs are interested to port newer kernel like galaxy w where started from 2.6 and updated up to 3.4..

left it open haky..maybe they are busy for now..we need it bro

haky 86 said:
thanks guys but may i wil discontinued this project since no devs are interested to port newer kernel like galaxy w where started from 2.6 and updated up to 3.4..
Click to expand...
Click to collapse
sad news!
I was really looking forward if someone can port a new kernel, but as you said it's not an easy job and no devs are intrested

haky 86 said:
thanks guys but may i wil discontinued this project since no devs are interested to port newer kernel like galaxy w where started from 2.6 and updated up to 3.4..
Click to expand...
Click to collapse
So this one is really down? Hey, man, we need you, continue your work

why me? the best succeed I got is integrate part of capri's kernel archecture into 3.4 and entire code should be readpted to work on our phone. in case of even ported, I will not release the source coz I will not do the homeworks of others

3.1.2 Kernel
-update patch like 3.0.31 -> 3.0.32 is adapted as well.
-now im apply the patch to update the code see ya.

3.1.2 in progress
I have a question dear @CoolDevelopment I manage to update the kernel of this phone from 3.0.101 to 3.1.2 using the patch of kernel.org's website.
here my questions:
-if got failed patch, should skip them in case can't found it code?
-I saw there are a lot of detected commit that already patched, should be skipped too and apply only the new code?
-is enough just downloading 3.1.2.patch and use patch -p1 method or should download kernel source too.
https://www.kernel.org/pub/linux/kernel/v3.x/
now I'm compiling a zImage seems no errors for now, if boot I will continue the port :good:
thanks in advance

haky 86 said:
I have a question dear @CoolDevelopment I manage to update the kernel of this phone from 3.0.101 to 3.1.2 using the patch of kernel.org's website.
here my questions:
-if got failed patch, should skip them in case can't found it code?
-I saw there are a lot of detected commit that already patched, should be skipped too and apply only the new code?
-is enough just downloading 3.1.2.patch and use patch -p1 method or should download kernel source too.
https://www.kernel.org/pub/linux/kernel/v3.x/
now I'm compiling a zImage seems no errors for now, if boot I will continue the port :good:
thanks in advance
Click to expand...
Click to collapse
Upload your source man, else noone can help you
I hope you don't have just changed the version numbers...

no i didn't, here my new branch
https://github.com/hak86/android_kernel_samsung_galaxys2plus-common/tree/3.1.2-lp
Compilation is work fine, now i will try to compile with make -j4 bootimage to get the modules and use them on nebula's flashable.

Towards a Complete Kernel Source Code For Lenovo A6000 / Plus

Complete Kernel Source Code is essential for building rom from scratch
what lenovo did it give us incomplete Code missing the important files and directories and hide the essential part
Lenovo should release kernel source in full, so we can look after our self
Kernel development doesn't take place unless we get the device's schematics and its corresponding defconfig.
Lenovo has hidden the caf tag inside the firmware. there is matching qcom caf kernel tag for the same chipset. But without the schematics of the device, we couldn't proceed in developing
until now the official source is incomplete
but some developers trying to fill the gaps from similar devices you can find these builds on github
here is the last source kernel from lenovo and github
Downloads:
kerenel source from github by Flour_Mo :
here
kerenel source from github by ramsudharsan updated 20/8/2015 :
Here
kerenel source from Lenovo updated 7/8/2015:
Here
XDA:DevDB Information
Towards a Complete Kernel Source Code For Lenovo A6000 / Plus, ROM for the Android General
Contributors
ED300
ROM OS Version: 5.1.1. Lollipop
Version Information
Status: Testing
Created 2015-08-24
Last Updated 2015-08-24

When u develop your own kernel?

sourav8434 said:
When u develop your own kernel?
Click to expand...
Click to collapse
when i have a complete source kernel

what are you making
For which rom you are working now and when u will release kernel for lenovo a6000

check this out please
check this link please if it is complete or not
xttp://lenovo-forums.ru/topic/11326-lenovo-a6000-%D0%B8%D1%81%D1%85%D0%BE%D0%B4%D0%BD%D1%8B%D0%B9-%D0%BA%D0%BE%D0%B4-%D1%8F%D0%B4%D1%80%D0%B0/?hl=%2Ba6000+%2Bplus
change x to h

SIMBIOS said:
check this link please if it is complete or not
xttp://lenovo-forums.ru/topic/11326-lenovo-a6000-%D0%B8%D1%81%D1%85%D0%BE%D0%B4%D0%BD%D1%8B%D0%B9-%D0%BA%D0%BE%D0%B4-%D1%8F%D0%B4%D1%80%D0%B0/?hl=%2Ba6000+%2Bplus
change x to h
Click to expand...
Click to collapse
this is the same incomplete lenovo source

sourav8434 said:
For which rom you are working now and when u will release kernel for lenovo a6000
Click to expand...
Click to collapse
don't worry good news coming in the way

what news
ED300 said:
don't worry good news coming in the way
Click to expand...
Click to collapse
Whats that news ed3000

bad news
ED300 said:
don't worry good news coming in the way
Click to expand...
Click to collapse
hey i just checked lenovo site now lollipop update is in september
whats the good news?

SIMBIOS said:
hey i just checked lenovo site now lollipop update is in september
whats the good news?
Click to expand...
Click to collapse
i can't confirm any thing now ,
but i think the coming days we will make progress to solve sim bug completely on CM12.1

missing things
Hi,
I find following things missing from stock kernel
1. whole kernel directory all together
2. Def-config (altough i managed to extract it from boot.img)
Do you what are other things that are missing?
I'm able to compile the kernel with some fixes from cm kernel, but now able to generate the dtb file. Any help will be appreciated.
Thanks
Chhapil

yay
ED300 said:
i can't confirm any thing now ,
but i think the coming days we will make progress to solve sim bug completely on CM12.1
Click to expand...
Click to collapse
good luck hope you fix it praying for u

Hello how can i fix my phone lenovo A6000 it always pop up please input puk code.. How can i remove it? Thanks

Penggot said:
Hello how can i fix my phone lenovo A6000 it always pop up please input puk code.. How can i remove it? Thanks
Click to expand...
Click to collapse
i think the problem on the sim try different sim and see what happen

chhapil said:
Hi,
I find following things missing from stock kernel
1. whole kernel directory all together
2. Def-config (altough i managed to extract it from boot.img)
Do you what are other things that are missing?
I'm able to compile the kernel with some fixes from cm kernel, but now able to generate the dtb file. Any help will be appreciated.
Thanks
Chhapil
Click to expand...
Click to collapse
good job chhapil
i gave links to kernel source from github it should be completed
you will find also at github the source for cynogenmod 12.1 if you want compile it

Here is the latest update from my side.
I'm able to create zimage from kernel, dtb from source. But the kernel fails to boot.
If I flash my kernel the phone restarts with blank screen and it mounts all the partitions when connected to pc.
I'm not very sure what's going wrong.
Sent from my GT-I9100 using XDA Free mobile app

chhapil said:
Here is the latest update from my side.
I'm able to create zimage from kernel, dtb from source. But the kernel fails to boot.
If I flash my kernel the phone restarts with blank screen and it mounts all the partitions when connected to pc.
I'm not very sure what's going wrong.
Sent from my GT-I9100 using XDA Free mobile app
Click to expand...
Click to collapse
try this link :
https://github.com/Silentlys/Cyanogenmod_device_lenovo_Kraft_T/tree/cm12.1
copy from kernel folder to kernel source and compile
you will find also zimage ready

kernel for lenovo a6000
chhapil said:
Here is the latest update from my side.
I'm able to create zimage from kernel, dtb from source. But the kernel fails to boot.
If I flash my kernel the phone restarts with blank screen and it mounts all the partitions when connected to pc.
I'm not very sure what's going wrong.
Sent from my GT-I9100 using XDA Free mobile app[/QUOTE.
Hey. Chhapil. When will you release kernel for lenovo a6000/plus?
Have u made if you made then post please
We will be thankful
Click to expand...
Click to collapse

There is no point releasing non working kernel.
Let's wait till ED300 posts a working build or Lenovo themselves.
Sent from my GT-I9100 using XDA Free mobile app

kernel boot issue
Hi,
Here is the issue i'm facing.
I created a new image from the KK stock kernel + the missing parts , repacked it the boot.img from the stock rom.
When i do
fastboot boot new-boot.img
the phone reboots and mounts the system partition and couple of other internal partitions with no display.
Do you know these symptoms?
Any Idea what could be going wrong here?
On the other note,
the LP source code compile good without any issues at all, but I'm using stock KK so there is NO room for to make tries with it.

[ROM][DEPRECATED] OLD Cyanogenmod 11

ROM DEPRECATED, USE LAST CM11 HERE

ROM DEPRECATED, USE LAST CM11 HERE
USE ONLY LASTEST BUILD

I forgot the rom name but there's a kitkat rom with no screen flickering issue by niropa (on lollipo bootloader). u can contact with niropa to solve screen flickering issue.

Yes,was in a wrong place, i have contacted a moderator, now is in android development.

Ok , i think cm11 its the most stable tree from cm team , i like KK because its more ligth weigth , i dont know why the developers wonma make roms unstable and buggies hehe , can u add a custom features? Like another toolchain? (Linaro , Uber) or new features from kernel? Like more i/o (zen ) , gpu OC or cpu OC?...
Anyway , Thank U its run great
Enviado desde mi Moto G mediante Tapatalk

STR4NG3R-GUY said:
Ok , i think cm11 its the most stable tree from cm team , i like KK because its more ligth weigth , i dont know why the developers wonma make roms unstable and buggies hehe , can u add a custom features? Like another toolchain? (Linaro , Uber) or new features from kernel? Like more i/o (zen ) , gpu OC or cpu OC?...
Anyway , Thank U its run great
Enviado desde mi Moto G mediante Tapatalk
Click to expand...
Click to collapse
unfortunately I am only at the beginning, I'm learning slowly how to create rom from source code, for the moment I do not know to create kernels with overcloclock or similar. I'm only 15 years old, and this is the second ROM in total which I compile

SLATE21&MOTOG said:
this rom works with all bootloader, kitkat and lollipop, but with the lollipop one you will get screen flickering. If anyone knows how I can do a build with no screen flickering can contact me in pm.
Click to expand...
Click to collapse
See PACMan builds with overkill kernel by niropa. Just search in that thread and you'll find many ROMs like CarbonKK or PA, which are made to work on LP bootloader

Will this work on msim variant also? I read you mentioned xt1032 but still if you know..

It might work, but has been tested only on xt1032 aka falcon.

tested on XT1033, very stable ROM, smooth ROM ever :fingers-crossed::fingers-crossed:

Stock cm11 kernel or something else is there? I can see "overkill kernel" that reminds me really good things

Rocketval said:
Stock cm11 kernel or something else is there? I can see "overkill kernel" that reminds me really good things
Click to expand...
Click to collapse
Yes, I have used Overkill kernel that @Niropa has used in his Pac-man rom build, with the hope of fix the screen flickering, but the problem remain. This is aniway a good and stable kernel. For more information see: https://github.com/ReaperXL2/Overkill_V4_extended/tree/cm-11.0

SLATE21&MOTOG said:
Yes, I have used Overkill kernel that @Niropa has used in his Pac-man rom build, with the hope of fix the screen flickering, but the problem remain. This is aniway a good and stable kernel. For more information see: https://github.com/ReaperXL2/Overkill_V4_extended/tree/cm-11.0
Click to expand...
Click to collapse
But are kernel sources updated? Or using it cause some incompatility such as hotspot, bt or something else?

All work fine, bluetooth and hotspot work. I have tested it, the only warnings are 3:
-Do not active kernel samepage merging, you will have problem in camera
-install gapps only after the first reboot of the rom
-If you use whatsapp install it before switching to ART (in developer setting, for better performance select ART)
There aren't particular bugs

SLATE21&MOTOG said:
All work fine, bluetooth and hotspot work. I have tested it, the only warnings are 3:
-Do not active kernel samepage merging, you will have problem in camera
-install gapps only after the first reboot of the rom
-If you use whatsapp install it before switching to ART (in developer setting, for better performance select ART)
There aren't particular bugs
Click to expand...
Click to collapse
Why gapps only on second boot?

ale467 said:
Why gapps only on second boot?
Click to expand...
Click to collapse
Because if you install the rom and after the gapps and you reboot, the setup wizard crash. I have tryed it

https://www.youtube.com/watch?v=YFATFIufW7Q&feature=youtu.be
This is a small video demonstration of the rom, 60 second.

SLATE21&MOTOG said:
Yes, I have used Overkill kernel that @Niropa has used in his Pac-man rom build, with the hope of fix the screen flickering, but the problem remain. This is aniway a good and stable kernel. For more information see: https://github.com/ReaperXL2/Overkill_V4_extended/tree/cm-11.0
Click to expand...
Click to collapse
Check out xperience kernel to get rid of screen flickering

Niropa said:
Check out xperience kernel to get rid of screen flickering
Click to expand...
Click to collapse
could you give me the kernel link on github ?

SLATE21&MOTOG said:
could you give me the kernel link on github ?
Click to expand...
Click to collapse
I don't have the link I haven't built for the moto g in ages, just go to the xperience thread, their is only 1 kernel by teamex called xperience

[ROM] Sailfish OS

For XT107x, aka Moto G 2ng Gen LTE, aka Thea
For Titan (Non LTE variant), here is a link, by @Mister_Magister.
I am NOT responsible for any damage caused to or by your phone.
Click to expand...
Click to collapse
Working :
- boot
- touch
- Bluetooth
- Wifi
Not working :
- bootanimation (Unfixable)
- Camera
- Ril (SIM not detected)
- GPS (probably, untested)
- reboot breakes Wifi and BT
Downloads
AndroidFileHost
(If it is empty or if a build is missing, don't complain, it means the rom is still uploading)
Installation
- If coming from stock MM, or if you have ever been on stock MM, jolla recommends to flash back stock LP.
- Clean flash CM12.1 (IMPORTANT)
- Flash SailfishOS zip
- Enjoy !
- ... and hit "thanks" if you like it
"Dual Boot"
(It is Not recommended, but I just want to show something possible)
Before flashing sfos, make a backup (a full one is recommended). Don't wipe your data and flash sfos.
Make a backup of the boot partition of sfos.
Rename that backup to be able to recognize it later.
When you want to switch between sfos and Android, restore the boot partition of the rom you want to boot.
Changelog :
Build 1:
First public release
Alpha 2:
Wifi fixed, added a lot of preinstalled apps
FAQ
If you have error "Could not configure normal mode." in warehouse run in terminal:
devel-su rm -rf /var/cache/pk-zypp-cache; devel-su pkcon refresh
"devel-su" will ask for a password... You can set it in the developper settings in the settings app.
Click to expand...
Click to collapse
Can I install "xxxxx" app ?
Check https://openrepos.net/ if the app exist.
Can I install android apps ?
You can't.
XDA:DevDB Information
Sailfish OS port for Thea, ROM for the Moto G 2014 LTE
Contributors
Mavireck, All devs at #sailfishos-porters, Mister_Magister for his port for Titan
Source Code: [url]https://github.com/Mavireck[/URL]
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Clean flash CM12.1
Version Information
Status: Alpha
Created 2016-04-05
Last Updated 2016-04-09

Great job mate If you need any help you know where to find me and other people (i mean irc ). Continue your work
Also sfos don't have bootanimation (or i'm wrong?). And for testing gps use test_gps in terminal.
Bluetooth is working? Try sending files xD

Mister_Magister said:
Great job mate If you need any help you know where to find me and other people (i mean irc ). Continue your work
Also sfos don't have bootanimation (or i'm wrong?). And for testing gps use test_gps in terminal.
Bluetooth is working? Try sending files xD
Click to expand...
Click to collapse
The boot animation is strange due to the surfaceflinger hack, I said it is not working to avoid receiving message like "I got cm bootlogo when booting" or anything like that .
GPS I think I removed all packages in order to make the build able to finish it is not gonna work ^^
And I haven't tested sending files over BT.

Mavireck said:
The boot animation is strange due to the surfaceflinger hack, I said it is not working to avoid receiving message like "I got cm bootlogo when booting" or anything like that .
GPS I think I removed all packages in order to make the build able to finish it is not gonna work ^^
And I haven't tested sending files over BT.
Click to expand...
Click to collapse
So you are using my sources? If yes then it's nice
I got sfdroid working

Mister_Magister said:
So you are using my sources? If yes then it's nice
I got sfdroid working
Click to expand...
Click to collapse
That's awesome that you could get sfdroid working !
And yes I applied a lot of fixes from your sources, thank you for sharing them

Alpha 2 released
- fixed Wifi
- added a lot of preinstalled apps (including Warehouse, an app store)
- Reboot sometimes works, but Wifi and BT are broken after reboot
https://www.androidfilehost.com/?fid=24459283995316682

when will fix the other bugs？

jp06108 said:
when will fix the other bugs？
Click to expand...
Click to collapse
Please don't ask for ETAs
I will fix the other bugs when another dev will join the port.
In other word : never
"Don't expect something good to happen, this way if it happens you can only be happy"
And another important thing : I have a new phone (note 3) so the time spent making roms for Thea will be reduced...

Yes I see.I just love this rom and hope to use it.Thank you for your good job.thank you very much.

Well...
Some good news... And some (less) good news...
...
...
...
On my last (unreleased) build :
- my old Sim card was detected... SMS should be working! ! (calls may not as I removed a package but I will try to fix it)
- Reboot didn't seem to be broken !!
- Bluetooth worked after reboot
But Wi-Fi is broken.
And I will be away from computer 10 days in a few days. If I can fix Wi-Fi before I go I will release a new build, if no you will have to wait.
All thanks go to @Mister_Magister !
(I stole his work and I feel like a thief now )

Mavireck said:
Well...
Some good news... And some (less) good news...
...
...
...
On my last (unreleased) build :
- my old Sim card was detected... SMS should be working! ! (calls may not as I removed a package but I will try to fix it)
- Reboot didn't seem to be broken !!
- Bluetooth worked after reboot
But Wi-Fi is broken.
And I will be away from computer 10 days in a few days. If I can fix Wi-Fi before I go I will release a new build, if no you will have to wait.
All thanks go to @Mister_Magister !
(I stole his work and I feel like a thief now )
Click to expand...
Click to collapse
Whaat? I helped? when? Lol i didn't know that
PS: Try force shutdown (hold power button) and then wifi will work (i have the same error xD)
Also moving port to cm-12.1 was pretty easy Most of sources are form cm11 just kernel and device sources

Mister_Magister said:
Whaat? I helped? when? Lol i didn't know that
PS: Try force shutdown (hold power button) and then wifi will work (i have the same error xD)
Also moving port to cm-12.1 was pretty easy Most of sources are form cm11 just kernel and device sources
Click to expand...
Click to collapse
Well you have uploaded your sources! That's one of the best help you can provide!
Force shutdown doesn't seem to work... And wlan-module-load failed when it started.
Anyway I'll see tomorrow it is late now.

Mavireck said:
Well you have uploaded your sources! That's one of the best help you can provide!
Force shutdown doesn't seem to work... And wlan-module-load failed when it started.
Anyway I'll see tomorrow it is late now.
Click to expand...
Click to collapse
Heh i did nothing
systemctl status wlan-module-load -l
i guess it can't find wlan module

Mavireck said:
Well you have uploaded your sources! That's one of the best help you can provide!
Force shutdown doesn't seem to work... And wlan-module-load failed when it started.
Anyway I'll see tomorrow it is late now.
Click to expand...
Click to collapse
Any updates? Are you still working on it?

Mister_Magister said:
Any updates? Are you still working on it?
Click to expand...
Click to collapse
Arf...
I still have the sources on my computer, i wanted to take care of that port recently but this year I am having a lot of homework...

Mavireck said:
Arf...
I still have the sources on my computer, i wanted to take care of that port recently but this year I am having a lot of homework...
Click to expand...
Click to collapse
ouch, thats noot good :/ Can i help you in some way?

Mister_Magister said:
ouch, thats noot good :/ Can i help you in some way?
Click to expand...
Click to collapse
Do you want to do maths ? :silly:
Kidding aside, that's OK I think I know what to do. But that's very nice to ask !

Did you abandon this rom?
Abandonou essa rom?
Did you abandon this rom?

xuxu17 said:
Abandonou essa rom?
Did you abandon this rom?
Click to expand...
Click to collapse
Hi,
have a look at this https://forum.xda-developers.com/moto-g-lte/development/rom-thea-sailfish-os-2-0-5-6-t3542079 if you are interested in Sailfish OS on the thea.
Have fun - Guhl

[KERNEL] [MTD] [TW/CM9/CM11] [DEV] Watson Kernel (MTD support on Gingerbread!)

Hello guys,
This is a project I was working on for a kernel for our SGY.
I made it with a few things in mind:
>Improve it's performance
>Be universally compatible (after I nearly given up on trying to get a snappier CM11 and after the need for a snappier SGY, I decided to go back to GB. However, BML is terrible, and it is annoying to come back to. I decided to build a MTD kernel for Gingerbread then, and it works!)
>Experiment and upgrade as much as I can (thanks @robcore!!!!)
But since I lost my device, I cannot continue developing it. I am then releasing the source code (sorry, no flashable stuff, I deleted it long ago ) for any of you to continue(?) my work if your heart so desires.
If I ever get myself another SGY (or another BCM21553 device), I will gladly continue development (and support whoever does it too), but before I lose all my data and the kernel code alongside it, I am making it available.
This kernel features:
-OC up to 1040MHz (It's questionable even today if the bcm21553 OCs really work, but I tried hacking a way that works very similarly to MarocOS's one, maybe even better. Be warned though, the source around it is messy)
-GPU hacks for performance (Again, even I don't know if they do work, probably the values are just there to be seen, I'm not sure. I do know though that increasing the CPU speed will much likely increase the speed of V3D too)
-DVFS disabled (I found out DVFS is mostly the culpirit in the "832MHz crisis" where the kernel would forcefully scale itself to 832MHz, so I eliminated any reference to it in kernel code. Apparently DVFS on the processor is only available under the bcm21553 governor, but it is present on the other drivers as well. The idea for disabling DVFS came from my friend @robcore)
-A few additional governors and a buggy interactive governor (which is the default xd)
-MTD support for Gingerbread (Thanks Samsung Epic 4G! Although it only works on TouchWiz (I tried it with SL v2 and v2.1 and it works, but under NougatME(CM7) I got no success and loads of segfaults), it works ALMOST perfectly. See bugs for details )
-Some scraped source code from Samsung's FSR I found on the internet (barely compilable, though)
Bugs:
>Gingerbread version:
-IMEI won't appear in the Status screen, I also faced problems with non-working radio for calls. Data works just fine, but calling and receiving calls is unavailable. I believe it is EFS-related. My suggestion is backing up the EFS partition's file structure, then converting it to MTD, then restoring the backup.
-TWRP will crash and panic when exiting, a workaround is force rebooting
>ICS version:
-TWRP will crash and panic when exiting (I believe fixing it here will fix the bug above too)
>KitKat version:
-Flashing images fail randomly, you may also be unable to reboot normally if you do so. I tried addressing this but I couldn't get anywhere.
DOWNLOAD THE SOURCE: Here!
Thanks to:
 @robcore - his development on the Snapdragon S4 breathes life on my dev soul!
 @zman0900 - I saw his thread on an MTD TW kernel for the Samsung Epic 4G, which led me to believe MTD on GB is possible.

nice kernel
It sound nice. I'm a newbie developer, I'm building a kernel to fix audio bug on cm9, hope it work. And thank you for the source

vdhero said:
It sound nice. I'm a newbie developer, I'm building a kernel to fix audio bug on cm9, hope it work. And thank you for the source
Click to expand...
Click to collapse
Have you gathered enough info on it? I would like to fix it too, but I couldn't get any info on whether if the audio bug is a kernel-side issue or an OS -side issue.
Best of luck for you

Building and fixing
sonickles9 said:
Have you gathered enough info on it? I would like to fix it too, but I couldn't get any info on whether if the audio bug is a kernel-side issue or an OS -side issue.
Best of luck for you
Click to expand...
Click to collapse
I don't sure so I decided to build a kernel from your source and another cm9 version from Mohamad.Afaneh's source and I'll merge the audio on both of them for the best think to fix the bug.Thank you .

Link for kernel?
(img files...)(stock/cm9/cm11)

TheRealModder said:
Link for kernel?
(img files...)(stock/cm9/cm11)
Click to expand...
Click to collapse
Compile one for yourself,man. It only takes like 15-25 mins

vdhero said:
Compile one for yourself,man. It only takes like 15-25 mins
Click to expand...
Click to collapse
I don't know how to compile....

TheRealModder said:
I don't know how to compile....
Click to expand...
Click to collapse
He wrote a script already, just add your toolchain and run the script. There's a guide in the readme

vdhero said:
He wrote a script already, just add your toolchain and run the script. There's a guide in the readme
Click to expand...
Click to collapse
Ok. The watson-kernel-bcm21553-src is used with other files?
Because i want to make cm9 mohhamad afaneh optimized version

TheRealModder said:
Ok. The watson-kernel-bcm21553-src is used with other files?
Because i want to make cm9 mohhamad afaneh optimized version
Click to expand...
Click to collapse
To make it, you have to sync the cm9 source code then add the files from his github to your localmanifest. This thing is not in anyway related to that except the MTD. This one is a kernel-compile only source

Oh man, i give up. I can't build a kernel from source, but i can modify a kernel.
Can someone give me the zimage for ics Please....
Sent from my Zenfone 2 Laser using XDA Labs

TheRealModder said:
Oh man, i give up. I can't build a kernel from source, but i can modify a kernel.
Can someone give me the zimage for ics Please....
Click to expand...
Click to collapse
zlimage? We don't have that here, we only have boot.img for kernel

vdhero said:
zlimage? We don't have that here, we only have boot.img for kernel
Click to expand...
Click to collapse
Or you can give me the extracted boot.img files. (ICS/KK)
I will rebuild it using dsixda's android kitchen.
Sent from my Zenfone 2 Laser using XDA Labs

TheRealModder said:
Or you can give me the extracted boot.img files. (ICS/KK)
I will rebuild it using dsixda's android kitchen.
Sent from my Zenfone 2 Laser using XDA Labs
Click to expand...
Click to collapse
Sorry but I can't because I'm bored of making ROMs so I switched back to Windows. I'm planning on making a ROM, I'll compile the kernel for you once I get linux installed

vdhero said:
Sorry but I can't because I'm bored of making ROMs so I switched back to Windows. I'm planning on making a ROM, I'll compile the kernel for you once I get linux installed
Click to expand...
Click to collapse
Ok. If you want to install linux i recommend using ubuntu or linux mint.
Ubuntu official website:https://www.ubuntu.com/
Linux mint official website:https://linuxmint.com/
Sent from my Zenfone 2 Laser using XDA Labs

VDHERO Please But a New Galaxy t Gt-S5360 and start the Development!
vdhero said:
To make it, you have to sync the cm9 source code then add the files from his github to your localmanifest. This thing is not in anyway related to that except the MTD. This one is a kernel-compile only source
Click to expand...
Click to collapse
VDHERO Please But a New Galaxy t Gt-S5360 and start the Development!

Assabtigle said:
VDHERO Please But a New Galaxy t Gt-S5360 and start the Development!
Click to expand...
Click to collapse
Sorry but I can't since my sgy is dead for a long time ago. I'll try to make one if I can find one. I've heard that there are some places that sell sgy for about 5 bucks, i'll find one ì possible

Be fast bro!!
vdhero said:
Sorry but I can't since my sgy is dead for a long time ago. I'll try to make one if I can find one. I've heard that there are some places that sell sgy for about 5 bucks, i'll find one ì possible
Click to expand...
Click to collapse
BE fast BRO Love U and Your WORK!!
All Your DEVELOPMENT are Faster than The ORIGINAL one Please Buy a NEW one!
and Yeah install the Stock Rom in your Phone by ODIN it will be fine!:laugh: