Public free TOT bypass FRP h901 firmware 5.1.1 - LG V10 General

https://drive.google.com/file/d/0B_H...ew?usp=sharing
: LGUP
1. Download this.
2. Install the LG Drivers.
3. Extract the RAR File to get the .TOT file.
4. Unzip "lgupnew.zip"
5. Run LGUP_Store_Frame_Ver_1_14_3.msi
6. LGUP_8994_DLL_Ver_0_0_1_18.msi
7. Copy the "common" folder to "C:\Program Files (x86)\LG Electronics\LGUP\model"
8. Plug phone into Downloadmod.
9. Run "LGUP" from your start menu.
10. Select your Phone if see option.
11. For the "BIN File" select the file you extracted in step 3.
12. You'll have root in about 3 minutes!
Donate : [email protected]

thks you hehe

Thank you!!!!!

Thank you

thank you free

Thank

What is FRP?

kaluna00 said:
What is FRP?
Click to expand...
Click to collapse
google acccount lock

Thank you.
But dont work for me, error code 0x2000, tot length issue. :/

Thank TOT file is invalid How to do?

wait edit file then upload again

tungkick said:
wait edit file then upload again
Click to expand...
Click to collapse
Any news on this or is it a lost cause?

i know this can be done because i had somebody unlock a H901 V10 on ebay remotely using team viewer and it took like 5mins! i didn't have to put the phone in download mode or emergency mode... nothing like that. it was done with LGUP.
and the phone worked perfectly. there is a mega easy way to do this if you have the frp bypass tot! but the people who have the tot files are selling them for between $150 to $200 per file... per phone! its F'n extortion.

File fix done waitting upload.

https://drive.google.com/file/d/0B_Hol5T47S-bdUM3N1Y0bkhISXM/view?usp=sharing
BYPASS FRP DONE

My H901 Because this can not enter the system e:unable to mount DATA...:crying::crying::crying::crying::crying:

would it be possible to see a .TOT frp bypass for VS99022a MM 6.0 in the near future.

@tungkick I used this file on my H901 and it bypassed it! it also rooted it! BUT there is a problem.. in the developer options setting the "oem unlock" button is NOT there!!
so the bootloader can not be unlocked and twrp can not be installed! how can I put back the button? I've done a hard reset through recovery mode and that didn't help.

this file needs to be taken away , thread closed or whatever...this tot removes oem unlock button ...you can't install twrp, you cant get into fastboot to unlock it... DONT USE THIS FILE you'll have root, but your bootloader will be locked. And being rooted with a locked BL isn't a good position to be in.

SuperZoilus said:
this file needs to be taken away , thread closed or whatever...this tot removes oem unlock button ...you can't install twrp, you cant get into fastboot to unlock it... DONT USE THIS FILE you'll have root, but your bootloader will be locked. And being rooted with a locked BL isn't a good position to be in.
Click to expand...
Click to collapse
Settings > General > About Phone > Software Info > Click On Build Number about 10 times until you have Developer Status.
Edit: sorry didnt read your post above it.. Disregard

Related

Root Mediapad/Honor X2

Before rooting you need to unlock bootloader of your device:
Unlocking process :
- For unlocking you need 3 identifications from your phone.
1. Serial No. You can find this in Settings > About phone > status. 2nd last line.
2. IMEI No. Again Settings > About phone > status. You need IMEI1 only. I repeat for dual sim phones, IMEI1 is only required.
3. Product ID. To get your phone's product ID, dial "*#*#1357946#*#*". The number you see on screen after dialing this code is Product ID. copy it.
- Now goto http://www.emui.com/plugin.php?id=unlock&mod=detail
This page is in chinese. From first dropdown select 2nd options. Wait for sometime, while it loads phone model names into second dropdown. Once phone models are loaded. Select GEM-703L from second dropdown.
- Put in your Serial No, IMEI No, Product ID in next 3 text boxes.
- Key in Verification code you see in image next to last box.
- Click Submit button (Right side green button)
If you consistently get some error. Mail above SN, IMEI, Product ID to [email protected]. They will revert back with unlock code in few days.
- Next download "X2 bootloader unlock.zip".
link : https://www.dropbox.com/s/zrznidv7c0fi4do/X2 Bootloader unlock.zip?dl=1
- Connect phone to computer, shutdown. Press and hold volume down button and power button. Keep holding volume down button, untill phone enters boot loader mode.
- double-click unlock.bat. Select option 3.
- Disconnect phone from computer, Key in the unlock code on phone. If unlock is success, you will see a android robot and "Phone unlocked" written below it.
Now Rooting :
There are essentially 3 methods for rooting, Method 3 is better than 2 is better than 1.
Method 3 : Credit : http://cn.club.vmall.com/space-uid-5467988.html
1. There are seperate rar files for B009 and B012. Download based on your current Rom.
B009 root : https://www.dropbox.com/s/h7os2bx7hsmp7cl/X2_root_B009_Kangvip.rar?dl=1
B012 root : https://www.dropbox.com/s/3tjywj9q9zadj0a/X2_root_B012_Kangvip.rar?dl=0
2. Check Debug usb mode in mobile and connect to windows computer.
3. Run Run.cmd, while phone is connected to computer. Follow On screen instructions. If successful, it will re-boot the phone and write new boot.img.
4. You will not Kinguser app installed. You are rooted.
Method 2 : Again chinese folks over at vmall forum china.
1. Download and extract rar file.
link : https://www.dropbox.com/s/2k8levlxjy97tn8/X2 Root Method 2.rar?dl=1
2. Check Debug usb mode in mobile and connect to windows computer.
3. Run 1.Run.Cmd, Follow instructions. Phone will reboot itself. If fail, try again.
4. You will see Chinese SU app installed. It will ask for updating binary automatically. Follow your intuition(chinese language) to click buttons and update binary. Don't worry it will be easy.
5. Reboot
6. Run 2.Run.Cmd, Follow instructions. Phone will reboot itself. If fail, try again.
7. Done. Open camera app, No camera issues.
Method 1 : May cause "Camera app not opening issue"
1. Download zip file, and unzip.
link : https://www.dropbox.com/s/qnrqncjridi5ipt/X2 Root Method 1.zip?dl=1
2. Check Debug usb mode in mobile and connect to windows computer.
3. Run Run.cmd, while phone is connected to computer. Follow On screen instructions. If successful, it will re-boot the phone and write new boot.img.
4. You will not Kinguser app installed. You are rooted.
Fail
Yo yo... Already we must wait few time...
It succeeded for me. see screenshot.
Did you unlocked bootloader before trying root ?
I have PHONE Unlocked and write error : FAILED (Remote: command not allowed!) File BOOT.img is propably bad...
And original link is already broken!
Kucko34 said:
I have PHONE Unlocked and write error : FAILED (Remote: command not allowed!) File BOOT.img is propably bad...
And original link is already broken!
Click to expand...
Click to collapse
Same to you
i didnt get it. Which part is not working for you ? Bootloader unlocking or rooting ?
Which link is broken ? both lins are opening here for me.
bark1234 said:
It succeeded for me. see screenshot.
Did you unlocked bootloader before trying root ?
Click to expand...
Click to collapse
Your rom is B009 or B012?
vuhongduong said:
Your rom is B009 or B012?
Click to expand...
Click to collapse
B012
Bootloader is unlocked! Under the green android figure I have "PHONE UNLOCKED"! CMD write this error...
I have too newest B012
bark1234 said:
It succeeded for me. see screenshot.
Did you unlocked bootloader before trying root ?
Click to expand...
Click to collapse
what did you use to root? (not about bootloader-unlocked already) thanks
I have already shared the rar file in the first post.
B012 me too but faile
bark1234 said:
I have already shared the rar file in the first post.
Click to expand...
Click to collapse
WORKED! checked via root explorer..in system app...woo hoo!
yes..changed font too now...all working (B012 had bootloader unlocked already when on previous version-was still unlocked as that process supposedly is permanent)
great enjoy!!!
And me still not working! Any idea?
Are you able to open camera app after rooting ?
I yes, therefore still not have root...
If I had known the camera would stop would not have rooted..oh well new problem to fix...
Edit ..at least screenshot and gallery work...apparently it is the root method?...some boards mention that camera failing is due to some specific root method and to flash recovery and boot image to fix problem..something to that effect
Sent from my GEM-703L using XDA Free mobile app
Yes. Re-root with second method, if you can take the pain to re-image to B009 and update then update to B012.
Process :
1. Download B009 from here : http://emuirom123.dbankcloud.com/GEM-703L_EMUI 3.0_android5.0_V100R001C233B009.rar?rid=1276
2. copy dload to sdcard and goto EMUI updater> setting > local update. Select update and image.
3. After 009 installation, update OTA to B012.
4. Goto 1st page of this post and root with new method mentioned.

New root android 6.0 H901

ROOT V20J H901
LOAD UP ON FILE WITH LG UP TOT
FILE HAS FULL ROOT + TWRP
LINK: https://drive.google.com/file/d/0B3R77elw9JjNQkpaUWkwNGstU1U/view
Flash files extract via LG UP tot
1: Flash files extract via LG UP choose upgrade then choose file tot.
2: Flash finished command "adb reboot recovery" or using the hard keys, power off, press the volume keys simultaneously 2 + source reduction, to release the logo and press the power key hands always, reduce the volume keys remain, keeping 2 keys, until into TWRP
3: When connected to a computer to copy TWRP SuperSU zip copied to the computer to download
4: Flash SuperSU
5: Reboot
Donate Paypal: [email protected]
You sir are my hero!! Donation coming in the next few days!!?
Slightly different way than we performed last night, but looks much more precise
Great work!
Sent from my A0001 using XDA-Developers mobile app
what exactly is "downloadmod"
tnpapadakos said:
what exactly is "downloadmod"
Click to expand...
Click to collapse
I believe he means "Download Mode"
Power Off
Hold Volume Up
Plug In USB
(i think)
tnpapadakos said:
what exactly is "downloadmod"
Click to expand...
Click to collapse
volume up on your phone as you plug in your usb
warp64 said:
volume up on your phone as you plug in your usb
Click to expand...
Click to collapse
so, in the stock recovery I guess...
what if I have stock LP, but rooted, and with TWRP recovery?
tnpapadakos said:
so, in the stock recovery I guess...
what if I have stock LP, but rooted, and with TWRP recovery?
Click to expand...
Click to collapse
Update TWRP to 3.0.2
Then you can use Eliminater74 Rom
Flash Part 1 Dont Reboot
Flash A Part 2 Dont Reboot
Flash SuperSU
Note**If Elimnater74s Rom does happen to delete your recovery.img then you can still flash TWRP by using FlashFire by ChainFire**
Also once you upgrade to MM even if its a ROM you CANNOT revert back to LP.
tnpapadakos said:
so, in the stock recovery I guess...
what if I have stock LP, but rooted, and with TWRP recovery?
Click to expand...
Click to collapse
Then you need to go to the Developer Section and see Eliminater74 because i think he's the only one with a rooted MM
[ROM] [STOCK] V10_H901_V20E_Stock2,430 posts
Thanks: 8,189
Double0EK said:
Update TWRP to 3.0.2
Then you can use Eliminater74 Rom
Flash Part 1 Dont Reboot
Flash A Part 2 Dont Reboot
Flash SuperSU
Note**If Elimnater74s Rom does happen to delete your recovery.img then you can still flash TWRP by using FlashFire by ChainFire**
Also once you upgrade to MM even if its a ROM you CANNOT revert back to LP.
Click to expand...
Click to collapse
OK thanks :good:
tungkick said:
Download rom kdz: https://docs.google.com/uc?id=0B3R77elw9JjNSmVsVjhjbWdLcEU&export=download
Download Tot add twrp: https://docs.google.com/uc?id=0B8mSVItI_cqRc0NPVlEtZmxqb2s&export=download
LG UP Download:MEGA, GOOGLEDRIVE
Step by step flash:
1. Download all file.
2. Install the LG Drivers.
3. Extract the RAR File to get the .TOT file.
4. Unzip "lgupnew.zip"
5. Run LGUP_Store_Frame_Ver_1_14_3.msi
6. LGUP_8994_DLL_Ver_0_0_1_18.msi
7. Copy the "common" folder to "C:\Program Files (x86)\LG Electronics\LGUP\model"
8. Plug phone into Downloadmod.
9. Run "LGUP" from your start menu.
10. Select your Phone if see option.
11. Choose bin file choosekdz v20e H901then chooseREFUBISH
12. Go to setting > develop > enabable usb debugging + oem unlock check.
13. Put downloadmod again, open lgup choose UPGRADE > choose file TOT LGH901AT-00-V20e-TMO-US-MAR-16-2016-ARB01+0.tot >Start.
14. Put phone to twrp download Supper SU (https://drive.google.com/file/d/0B8mSVItI_cqRNTlFeVJFNC1aejA/view?usp=sharing) Copy to phone memory then flash it> Done phone have root.
Donate : Click
Thank you @ Eliminater74
Click to expand...
Click to collapse
Where in these instructions do we flash the MM version of twrp? Or, is it already part of the tot file?
sanjsrik said:
Where in these instructions do we flash the MM version of twrp? Or, is it already part of the tot file?
Click to expand...
Click to collapse
It is part of the tot, directions look good, follow completely and you can have stock-rooted MM
Sent from my A0001 using XDA-Developers mobile app
demkantor said:
It is part of the tot, directions look good, follow completely and you can have stock-rooted MM
Click to expand...
Click to collapse
All I was looking for, thanks, will try this this weekend.
OP, just a suggestion, you may want to indicate that twrp is part of the tot file. It wasn't clear there.
This method certainly looks cleaner than the other method discussed last night. Looks like pure stock rooted which is exactly what I want. I passed out last night after i finished backing up everything which is a good thing now! I don't see anything about unlocking the bootloader in his instructions which is interesting. Basically it's flash the kdz, flash the tot, reboot recovery and flash superSu and you're golden. You would assume that this is necessary but has anyone tried this yet and not had to do that? It would actually be a bonus to not have to do that and avoid the corruption splash screen.
tungkick said:
Download rom kdz: https://docs.google.com/uc?id=0B3R77elw9JjNSmVsVjhjbWdLcEU&export=download
Download Tot add twrp: https://docs.google.com/uc?id=0B8mSVItI_cqRc0NPVlEtZmxqb2s&export=download
LG UP Download:MEGA, GOOGLEDRIVE
Step by step flash:
1. Download all file.
2. Install the LG Drivers.
3. Extract the RAR File to get the .TOT file.
4. Unzip "lgupnew.zip"
5. Run LGUP_Store_Frame_Ver_1_14_3.msi
6. LGUP_8994_DLL_Ver_0_0_1_18.msi
7. Copy the "common" folder to "C:\Program Files (x86)\LG Electronics\LGUP\model"
8. Plug phone into Downloadmod.
9. Run "LGUP" from your start menu.
10. Select your Phone if see option.
11. Choose bin file choose kdz v20e H901 then choose REFUBISH
12. Go to setting > develop > enabable usb debugging + oem unlock check.
13. Put downloadmod again, open lgup choose UPGRADE > choose file TOT LGH901AT-00-V20e-TMO-US-MAR-16-2016-ARB01+0.tot >Start.
14. Put phone to twrp download Supper SU (https://drive.google.com/file/d/0B8mSVItI_cqRNTlFeVJFNC1aejA/view?usp=sharing) Copy to phone memory then flash it> Done phone have root.
Donate : Click
Thank you @ Eliminater74
Click to expand...
Click to collapse
You will have a donation from me later in the week
tungkick said:
Download rom kdz: https://docs.google.com/uc?id=0B3R77elw9JjNSmVsVjhjbWdLcEU&export=download
Download Tot add twrp: https://docs.google.com/uc?id=0B8mSVItI_cqRc0NPVlEtZmxqb2s&export=download
LG UP Download:MEGA, GOOGLEDRIVE
Step by step flash:
1. Download all file.
2. Install the LG Drivers.
3. Extract the RAR File to get the .TOT file.
4. Unzip "lgupnew.zip"
5. Run LGUP_Store_Frame_Ver_1_14_3.msi
6. LGUP_8994_DLL_Ver_0_0_1_18.msi
7. Copy the "common" folder to "C:\Program Files (x86)\LG Electronics\LGUP\model"
8. Plug phone into Downloadmod.
9. Run "LGUP" from your start menu.
10. Select your Phone if see option.
11. Choose bin file choose kdz v20e H901 then choose REFUBISH
12. Go to setting > develop > enabable usb debugging + oem unlock check.
13. Put downloadmod again, open lgup choose UPGRADE > choose file TOT LGH901AT-00-V20e-TMO-US-MAR-16-2016-ARB01+0.tot >Start.
14. Put phone to twrp download Supper SU (https://drive.google.com/file/d/0B8mSVItI_cqRNTlFeVJFNC1aejA/view?usp=sharing) Copy to phone memory then flash it> Done phone have root.
Donate : Click
Thank you @ Eliminater74
Click to expand...
Click to collapse
If we are already on stock MM do we need to install the KDZ first? Or is that just to get you to MM?
Great write up by the way, even with a language barrier you made this simple and easy to understand!
[emoji106]
Sent from my LG-H901 using Tapatalk
Sorry for interrupting, i am H961N's user.
I am curious will this method also works on H961N and other models? Does this method need unlocked bootloader?
Cause' i am very desirous to have root on MM.
Thank you.
Everything seems fine until I get to this point:
13. Put downloadmod again, open lgup choose UPGRADE > choose file TOT LGH901AT-00-V20e-TMO-US-MAR-16-2016-ARB01+0.tot >Start.
Click to expand...
Click to collapse
after that I just get boot loops, red text boot verification failed.
I enabled OEM unlock in settings, so I don't know what the issue is. I also tried redownloading the files.
Nevermind, had to get into fastboot via Vol down + plug in USB then unlock the bootloader via adb command
ReelFiles said:
Everything seems fine until I get to this point:
after that I just get boot loops, red text boot verification failed.
I enabled OEM unlock in settings, so I don't know what the issue is. I also tried redownloading the files.
Click to expand...
Click to collapse
are you already on Marshmallow or are you doing this from Lollipop 5.1.1?
ReelFiles said:
Everything seems fine until I get to this point:
after that I just get boot loops, red text boot verification failed.
I enabled OEM unlock in settings, so I don't know what the issue is. I also tried redownloading the files.
Click to expand...
Click to collapse
is your bootloader unlocked? that was my problem. had to unlock it to get the phone to boot, then i got into TWRP and flashed su. i got it all done with the help of member warp64

[Tutorial | In-Depth] Huawei G750-U10 from Android 4.2 to 4.4.2 (+ personal exp)

Hello Everyone. This is my first post on XDA-Developers, and I want to share my experience on how I transferred my Huawei G750-U10 to Android 4.4.2. For the people not interested in my experience, and are only here for the explanation, scroll down to the tutorial part.
Story part (my experience)
First off, I did some research on how to root the phone, because you will need a rooted phone to install other firmware and custom ROMS. Rooting is essentially unlocking an account on your phone that has access to all the files and programs so that you can have more control over your phone (it is normally disabled for security reasons). Rooting the phone was easy. I used a program called RootGenius, which is just a 1 click-root program. Very handy and easy. After this, the hard part started.
Fyi, the only reason that I started this project is because I wanted to play Pokémon GO w/o buying a new device
From this step I did a full backup of my current ROM and NVRAM and wrote down my IMEI numbers (the G750 has 2 IMEI numbers because it has 2 SIM-Card slots). These numbers are unique for your phone and are used for calling and sending SMS messages. So make sure you write them down (in my phone they were also written down under the battery). The program I used to backup the NVRAM and the IMEI numbers is MTKDroidTools.
After this step, I tried unlocking my bootloader. But it was very stubborn (I was using the latest firmware from Huawei, B119) and I tried doing this with fastboot. Which failed every single time and gave a 0x7000 error when I tried to unlock the bootloader. But I have to say that my bootloader was acting weird from the start anyway. Whenever I used the command:
Code:
fastboot oem device-info
It always showed that the bootloader was unlocked, eventhough after I locked it using the command:
Code:
fastboot oem lock
Which is weird. So I will just include a tutorial on how to unlock the bootloader just in case yours works normal.
So, after realising that my bootloader was not working correctly, and I could not install any recovery mod like CWM or TWRP (or any custom ROM for that matter), I found out that I needed to flash to the chip directly. This was also a huge challange, since i've never done this before and I actually did not know what I was doing. I've changed ROMS on phones a couple of times before, but that always was with a unlocked bootloader and so via the "normal" recovery system way.
For this part, I used XDA user: jacktackles' post a lot. He had some handy information about flashing to the chipset immediately and on what files to use. Since my B119 firmware was locked, I first wanted firmware with an unlocked bootloader. So I flashed some Chinese G750 firmware, that changed my device from a G750-U10 to a G750-T00. The flashing process was not flawless at all, and was the part that took me the most time (10+ hours). This all because I forgot to untick 1 simple box... Oh well, I guess that is how it works (at least I got it to work ). So, after flashing this Chinese firmware, the hardest part was done. And I had access to TWRP Recovery. With this I installed the custom ROM that I wanted, and that is where my adventure ended.
So, to summarize: It is not easy, and not beginner friendly. That is why I wanted to make this post: To make it easier for you guys to do the same and get to catch YOUR Pokémon! (Or just to upgrade to 4.4.2). So let's now go to the tutorial part!
Tutorial part
I did this with a Windows 10 64-bit computer, although I would recommend using Windows 7. You will also need a usb-cable to connect your phone to your computer. Make sure that everytime you install a new ROM that you re-enable USB-debugging. You do this by going to your phone options > About Phone > Click "build number" 7 times > Go back to options > Developers options and tick the USB-Debugging tickbox.
Sorry for not uploading screenshots, but XDA prevents me from using any outside links because I'm a new user (so i'll try to be as precise as possible). This means that also any downloadable files should be retrieved from jacktackles' post (again big thanks to him!). His forum post can be found here: http://forum.xda-developers.com/android/general/huawei-g750-u10-honor-3x-kitkat-4-4-2-t3038166.
So, go to his post and download the VCOM drivers, MKT Droid Tools, B113 4.2.2 base with unlocked bootloader, Root Genius, and this ROM from another XDA-Developer: http://forum.xda-developers.com/showthread.php?p=62356379#post62356379 (Thanks a lot mate! Awesome upload). The Gaaps link is not needed with my method, and the last link is down. So you will need to get a replacement ROM for that. I used one from NeedRom. Just go to their site, and search for G750-U10 and download a ROM that you want (which is Android 4.4.2 of course). Or download another rom from any other site. The one I used is called: G750-U10 KitKat which was listed on the site on: 07/22/2015 11:35 pm. But you can also choose to download another ROM.
So to sum up, we got 3 ROMS:
1. The Chinese Firmware downgrade to B113
(FILENAME: G750-U10 V100R001C00B113CUSTC432D001_Firmware_Slovakia_Austria_Lithuania_Czech Republic_Latvia_Estonia_Greece_05021NHU)
2. The ROM from pavel22 to change the device to G750-T00
(FILENAME: G750-T00_mod8_265_FlashTool)
3. The ROM that we finally are after
(FILENAME: Huawei G750 U10 Kit Kat 4.9.16)
(In my case of course, not if you downloaded another "final" ROM)
Okay, so after all the files are downloaded and extracted (except for the 3rd ROM), we can start!
1. Rooting
This step is very simple and quick. Plug in your phone to your PC and open Root Genius. Click the big button and your phone should be rooted. If it gives an error, just try again and again until it works. After this restart your phone, and a new app "RootKing" should be installed. If not, the phone is not rooted.
2. MTK Droid Tools (backing up NVRam & IMEI)
Extract MTK Droid Tools from it's ZIP file, and place it in a folder. Now extract the VCOM drivers and install them. These drivers make MTK Droid Tools recognize your device. After installing the drivers, open up the .exe file from MTK and make sure it recognizes your device. If it does not, reboot your PC and try again. After your device is recognized, install the "adbd insecure" app on your device, from the playstore (or download it somewhere else if you do not want to pay). But trust me, it is worth the money. Once adbd is installed, tick both boxes on the app, so that we can connect to your phone with MTK. If done correctly, MTK Droid Tools should now be able to get full access to your device, and a green box will appear in the left bottom of the program.
Now, backup your NVRam and IMEI. You do this by clicking on the "IMEI/NVRAM" button, and clicking backup. To be safe and for ease of access, write down your IMEI's on a paper or notepad file. Now the real fun starts!
2.5 Unlocking the bootloader (you might not have to do this)
Only do this step if you get a BROM error with code 6045 when trying to flash any roms. Here is how you unlock the bootloader:
1. Install ADB drivers. I used a tool made by XDA user Snoop05 (http://forum.xda-developers.com/showthread.php?p=48915118)
2. Connect your device to your pc
3. Open up a command promt from windows
4. type "adb" and check if it returns a big list of available commands (that you know for sure that adb is installed)
5. Type "fastboot" and check if it returns a big list, for the same reason
6. Now type "adb devices" and check if it gives your device, if not make sure you have correct usb drivers installed for the G750-U10, if not just install HiSuite from Huawei (It comes with the correct drivers), then disconnect your device and type "adb devices" again.
7. Now type "adb reboot-bootloader" and your phone will restart in fastboot mode.
8. Type "fastboot oem unlock" and follow the instructions on your phone screen (they are very small and hard to read).
3. Flashing the Chinese Firmware
In the Chinese firmware folder, there will be 4 sub-folders: SD_Upgrade, Update Tool, USB_DRV, USB_Upgrade.
0. Delete the SD_Upgrade folder (Not needed).
1. Go to USB_DRV and install the .exe file in the: "Driver For servers 2012-11-27" rar file.
2. After this open the Update Tool folder and extract files.
3. Open the flash_tool.exe file, which is used to flash the device (like the name suggests )
4. Once the program is open, click on the "scatter-loading" button. Search for the USB_Upgrade folder, and select the MT6592_Android_scatter.txt file.
5. Turn off your device, remove the battery, wait a few seconds and reinsert the battery back into the device. Do NOT turn on the device.
6. Make sure SP_Flash_Tool is set to "Download only" (can be set by the dropdown box)
7. Click the "Download" button, and connect your device to your PC.
8. Wait, and the progress bar will fill up. DO NOT DISCONNECT YOUR DEVICE OR YOU COULD BRICK IT!
9. Success? Great! Restart the phone and progress to the next step!
10. Failure? Untick the Preloader partition and repeat from step 5. Still not working? Also untick USRDATA and try again.
4. Flashing the: "G750-U10 to G750-T00" Firmware
This will be almost the same as part 3.
Extract the "G750-T00_mod8_265_FlashTool" rar file, and:
3. Open the flash_tool.exe file, which is used to flash the device (like the name suggests )
4. Once the program is open, click on the "scatter-loading" button. Search for the USB_Upgrade folder, and select the MT6592_Android_scatter.txt file (make sure that you select the scatter file from the new rar file, and that you are not using the same one as before).
5. Turn off your device, remove the battery, wait a few seconds and reinsert the battery back into the device. Do NOT turn on the device.
6. Make sure SP_Flash_Tool is set to "Download only" (can be set by the dropdown box)
7. Click the "Download" button, and connect your device to your PC.
8. Wait, and the progress bar will fill up. DO NOT DISCONNECT YOUR DEVICE OR YOU COULD BRICK IT!
9. Success? Great! Restart the phone and progress to the next step!
10. Failure? Untick the Preloader partition and repeat from step 5. Still not working? Also untick USRDATA and try again.
5. Restoring your NVRam and IMEI
You might need to root your device again, check if need be, by searching for an app called SuperSU or RootKing. If they are not present, root the device again with Root Genius.
You will need to re-install the "adbd" app on your new ROM. If there is no Play Store present, search for a Play Store APK on Google. Once, installed check the 2 tickboxes and re-open MTK Droid Tools.
Click on the "IMEI/NVRAM" button restore your backed-up NVRAM and retype you IMEI codes. Once the restores are done, restart the phone and check if you can call someone. If it works, good job! You can now progress to the very last step! If not, check if you entered the IMEI correct. You probably made a Typo.
6. Installing final ROM
Now that you have installed pavel22's ROM, you have access to a recovery system. So copy the whole 3rd zip file to the root folder of you device. Turn off your device, and turn it on again but this time while holding both volume buttons and the power button until TWRP opens. Click on install, search your zip file and swipe right. When it finishes, do a factory reset from TWRP and then reboot the system normally. You should now have a fully working G750-U10 with Android 4.4.2. Congratulations!
This was my tutorial and personal experience with converting my G750-U10 to Android 4.4.2. It has been a wild ride, and i've reached points that I wanted to throw my device against the wall. I'm now very happy with my (feeling like) new device. I can now finally catch 'em all and become the best PokéMaster ever!
~ NeusAap.
Thank you for the tutorial. I know nothing about flashing.
However, I could follow the instruction until 4. Flashing the: "G750-U10 to G750-T00" Firmware.
The problem is that after I had clicked the "Download" button, and connected my device, the error popped up BROM ERROR : S_SECURITY_SECURE_USB_DL_IMAGE_SIGN_HEADER_NOT_FOUND (6045).
Could you please help? Thank you.
NT79 said:
Thank you for the tutorial. I know nothing about flashing.
However, I could follow the instruction until 4. Flashing the: "G750-U10 to G750-T00" Firmware.
The problem is that after I had clicked the "Download" button, and connected my device, the error popped up BROM ERROR : S_SECURITY_SECURE_USB_DL_IMAGE_SIGN_HEADER_NOT_FOUND (6045).
Could you please help? Thank you.
Click to expand...
Click to collapse
That error means that your bootloader must be locked. For me, it was acting weird. They way you want to (try) to unlock the bootloader is as follows:
1. Install ADB drivers. I used a tool made by XDA user Snoop05 (http://forum.xda-developers.com/showthread.php?p=48915118)
2. Connect your device to your pc
3. Open up a command promt from windows
4. type "adb" and check if it returns a big list of available commands (that you know for sure that adb is installed)
5. Type "fastboot" and check if it returns a big list, for the same reason
6. Now type "adb devices" and check if it gives your device, if not make sure you have correct usb drivers installed for the G750-U10, if not just install HiSuite from Huawei (It comes with the correct drivers), then disconnect your device and type "adb devices" again.
7. Now type "adb reboot-bootloader" and your phone will restart in fastboot mode.
8. Type "fastboot oem unlock" and follow the instructions on your phone screen (they are very small and hard to read).
If your bootloader is now unlocked, you should try to flash again. My phone gave an error at the step 9, but I still followed these 9 steps. So the error I got could also have been a visual programming error, or bug.
I hope this helps! Keep me up to date
NT79 said:
Thank you for the tutorial. I know nothing about flashing.
However, I could follow the instruction until 4. Flashing the: "G750-U10 to G750-T00" Firmware.
The problem is that after I had clicked the "Download" button, and connected my device, the error popped up BROM ERROR : S_SECURITY_SECURE_USB_DL_IMAGE_SIGN_HEADER_NOT_FOUND (6045).
Could you please help? Thank you.
Click to expand...
Click to collapse
Same error. I tried several times with "fastboot oem unlock" but it didn't work: err 0x7000. I could't find anything helpful on the internet.
The odd thing is when i typed "fastboot getinfo-bootloader" I got "(bootloader) unlocked".
I just wanted to be a pokemon trainer too
Iroh96 said:
Same error. I tried several times with "fastboot oem unlock" but it didn't work: err 0x7000. I could't find anything helpful on the internet.
The odd thing is when i typed "fastboot getinfo-bootloader" I got "(bootloader) unlocked".
I just wanted to be a pokemon trainer too
Click to expand...
Click to collapse
That was the excact same error I was getting. Also the same deal with the oem get-bootinfo thingy. Are you sure that while flashing you have unticked the "preloader" and the "usrdata" sectors? That is what did it for me honestly
SeñorNeusAap said:
Are you sure that while flashing you have unticked the "preloader" and the "usrdata" sectors? That is what did it for me honestly
Click to expand...
Click to collapse
I'm very sure, i tried locking ad re-unocking the bootloader but i get the same error
Iroh96 said:
I'm very sure, i tried locking ad re-unocking the bootloader but i get the same error
Click to expand...
Click to collapse
Alright, then skip step 3 and go to step 4. I might have screwed up the step orders (It's hard to remember in what order I did all the steps ) if that works, i'll change the OP. I'm dorry if thats the case.
SeñorNeusAap said:
Alright, then skip step 3 and go to step 4. I might have screwed up the step orders (It's hard to remember in what order I did all the steps ) if that works, i'll change the OP. I'm dorry if thats the case.
Click to expand...
Click to collapse
You mean flashing the G750-T00 fw and then the chinese one? So I have to reinstall the original fw? Cause currently I'm running the chinese
Iroh96 said:
You mean flashing the G750-T00 fw and then the chinese one? So I have to reinstall the original fw? Cause currently I'm running the chinese
Click to expand...
Click to collapse
Yes, flash the g750-t00 one, and then the rom that you want if that worked. I think that I might have skipped that whole firmware downgrage rom
Thank you for answering
I tried what you had told me to do, but when I typed "fastboot oem unlock", the phone told me to use Volume Up/Down button. I used "Volume Up" button to unlock bootloader but it failed - err 0x7000 same as Iroh96, I guess. So I typed "fastboot getinfo-bootloader"; however, I got "waiting for device" instead of "(bootloader) unlocked". Then, I tried step 4 but it was still an error 6045. I don't know what to do next.
Why is it so hard to be a pokemon trainer?
hi, i couldn't download the:
"Rooted with twrp recovery inbuild base rom"
because the link is not available.
is this really necessary?
if yes, can you give me another link to download it?
i wanna start follow the steps but first i need all the downloads
Inquiries
I already read and downloaded all files which included in jacktackles thread.. I even read the whole posts
My point of view is, im kinda a noob to root business and afraid to end up by destroying my device especially when I contacted an Egyptian -who had already converted his phone- and he didn't recommend to do this.. so please bare with me.
*first of all is the deal link for "Rooted with twrp recovery inbuild base rom" is this really necessary?
*2nd point is my phones build, its B116. Can I proceed converting my phone or it won't work?
Thanks in advance
FOR THOSE WHO ARE HAVING TROUBLE UNLOCKING THE BOOTLOADER:
I found this post from Pavel22
http://forum.xda-developers.com/showpost.php?p=55497054&postcount=1768
Good luck! I successfully converted my Huawei G750-U10 to G750-T00. Now, I'm on Kitkat 4.4.2. Thanks for this in-depth tutorial, btw. Was really a great help.
SeñorNeusAap said:
Hello Everyone. This is my first post on XDA-Developers, and I want to share my experience on how I transferred my Huawei G750-U10 to Android 4.4.2. For the people not interested in my experience, and are only here for the explanation, scroll down to the tutorial part.
Story part (my experience)
First off, I did some research on how to root the phone, because you will need a rooted phone to install other firmware and custom ROMS. Rooting is essentially unlocking an account on your phone that has access to all the files and programs so that you can have more control over your phone (it is normally disabled for security reasons). Rooting the phone was easy. I used a program called RootGenius, which is just a 1 click-root program. Very handy and easy. After this, the hard part started.
Fyi, the only reason that I started this project is because I wanted to play Pokémon GO w/o buying a new device
From this step I did a full backup of my current ROM and NVRAM and wrote down my IMEI numbers (the G750 has 2 IMEI numbers because it has 2 SIM-Card slots). These numbers are unique for your phone and are used for calling and sending SMS messages. So make sure you write them down (in my phone they were also written down under the battery). The program I used to backup the NVRAM and the IMEI numbers is MTKDroidTools.
After this step, I tried unlocking my bootloader. But it was very stubborn (I was using the latest firmware from Huawei, B119) and I tried doing this with fastboot. Which failed every single time and gave a 0x7000 error when I tried to unlock the bootloader. But I have to say that my bootloader was acting weird from the start anyway. Whenever I used the command:
Code:
fastboot oem device-info
It always showed that the bootloader was unlocked, eventhough after I locked it using the command:
Code:
fastboot oem lock
Which is weird. So I will just include a tutorial on how to unlock the bootloader just in case yours works normal.
So, after realising that my bootloader was not working correctly, and I could not install any recovery mod like CWM or TWRP (or any custom ROM for that matter), I found out that I needed to flash to the chip directly. This was also a huge challange, since i've never done this before and I actually did not know what I was doing. I've changed ROMS on phones a couple of times before, but that always was with a unlocked bootloader and so via the "normal" recovery system way.
For this part, I used XDA user: jacktackles' post a lot. He had some handy information about flashing to the chipset immediately and on what files to use. Since my B119 firmware was locked, I first wanted firmware with an unlocked bootloader. So I flashed some Chinese G750 firmware, that changed my device from a G750-U10 to a G750-T00. The flashing process was not flawless at all, and was the part that took me the most time (10+ hours). This all because I forgot to untick 1 simple box... Oh well, I guess that is how it works (at least I got it to work ). So, after flashing this Chinese firmware, the hardest part was done. And I had access to TWRP Recovery. With this I installed the custom ROM that I wanted, and that is where my adventure ended.
So, to summarize: It is not easy, and not beginner friendly. That is why I wanted to make this post: To make it easier for you guys to do the same and get to catch YOUR Pokémon! (Or just to upgrade to 4.4.2). So let's now go to the tutorial part!
Tutorial part
I did this with a Windows 10 64-bit computer, although I would recommend using Windows 7. You will also need a usb-cable to connect your phone to your computer. Make sure that everytime you install a new ROM that you re-enable USB-debugging. You do this by going to your phone options > About Phone > Click "build number" 7 times > Go back to options > Developers options and tick the USB-Debugging tickbox.
Sorry for not uploading screenshots, but XDA prevents me from using any outside links because I'm a new user (so i'll try to be as precise as possible). This means that also any downloadable files should be retrieved from jacktackles' post (again big thanks to him!). His forum post can be found here: http://forum.xda-developers.com/android/general/huawei-g750-u10-honor-3x-kitkat-4-4-2-t3038166.
So, go to his post and download the VCOM drivers, MKT Droid Tools, B113 4.2.2 base with unlocked bootloader, Root Genius, and this ROM from another XDA-Developer: http://forum.xda-developers.com/showthread.php?p=62356379#post62356379 (Thanks a lot mate! Awesome upload). The Gaaps link is not needed with my method, and the last link is down. So you will need to get a replacement ROM for that. I used one from NeedRom. Just go to their site, and search for G750-U10 and download a ROM that you want (which is Android 4.4.2 of course). Or download another rom from any other site. The one I used is called: G750-U10 KitKat which was listed on the site on: 07/22/2015 11:35 pm. But you can also choose to download another ROM.
So to sum up, we got 3 ROMS:
1. The Chinese Firmware downgrade to B113
(FILENAME: G750-U10 V100R001C00B113CUSTC432D001_Firmware_Slovakia_Austria_Lithuania_Czech Republic_Latvia_Estonia_Greece_05021NHU)
2. The ROM from pavel22 to change the device to G750-T00
(FILENAME: G750-T00_mod8_265_FlashTool)
3. The ROM that we finally are after
(FILENAME: Huawei G750 U10 Kit Kat 4.9.16)
(In my case of course, not if you downloaded another "final" ROM)
Okay, so after all the files are downloaded and extracted (except for the 3rd ROM), we can start!
1. Rooting
This step is very simple and quick. Plug in your phone to your PC and open Root Genius. Click the big button and your phone should be rooted. If it gives an error, just try again and again until it works. After this restart your phone, and a new app "RootKing" should be installed. If not, the phone is not rooted.
2. MTK Droid Tools (backing up NVRam & IMEI)
Extract MTK Droid Tools from it's ZIP file, and place it in a folder. Now extract the VCOM drivers and install them. These drivers make MTK Droid Tools recognize your device. After installing the drivers, open up the .exe file from MTK and make sure it recognizes your device. If it does not, reboot your PC and try again. After your device is recognized, install the "adbd insecure" app on your device, from the playstore (or download it somewhere else if you do not want to pay). But trust me, it is worth the money. Once adbd is installed, tick both boxes on the app, so that we can connect to your phone with MTK. If done correctly, MTK Droid Tools should now be able to get full access to your device, and a green box will appear in the left bottom of the program.
Now, backup your NVRam and IMEI. You do this by clicking on the "IMEI/NVRAM" button, and clicking backup. To be safe and for ease of access, write down your IMEI's on a paper or notepad file. Now the real fun starts!
2.5 Unlocking the bootloader (you might not have to do this)
Only do this step if you get a BROM error with code 6045 when trying to flash any roms. Here is how you unlock the bootloader:
1. Install ADB drivers. I used a tool made by XDA user Snoop05 (http://forum.xda-developers.com/showthread.php?p=48915118)
2. Connect your device to your pc
3. Open up a command promt from windows
4. type "adb" and check if it returns a big list of available commands (that you know for sure that adb is installed)
5. Type "fastboot" and check if it returns a big list, for the same reason
6. Now type "adb devices" and check if it gives your device, if not make sure you have correct usb drivers installed for the G750-U10, if not just install HiSuite from Huawei (It comes with the correct drivers), then disconnect your device and type "adb devices" again.
7. Now type "adb reboot-bootloader" and your phone will restart in fastboot mode.
8. Type "fastboot oem unlock" and follow the instructions on your phone screen (they are very small and hard to read).
3. Flashing the Chinese Firmware
In the Chinese firmware folder, there will be 4 sub-folders: SD_Upgrade, Update Tool, USB_DRV, USB_Upgrade.
0. Delete the SD_Upgrade folder (Not needed).
1. Go to USB_DRV and install the .exe file in the: "Driver For servers 2012-11-27" rar file.
2. After this open the Update Tool folder and extract files.
3. Open the flash_tool.exe file, which is used to flash the device (like the name suggests )
4. Once the program is open, click on the "scatter-loading" button. Search for the USB_Upgrade folder, and select the MT6592_Android_scatter.txt file.
5. Turn off your device, remove the battery, wait a few seconds and reinsert the battery back into the device. Do NOT turn on the device.
6. Make sure SP_Flash_Tool is set to "Download only" (can be set by the dropdown box)
7. Click the "Download" button, and connect your device to your PC.
8. Wait, and the progress bar will fill up. DO NOT DISCONNECT YOUR DEVICE OR YOU COULD BRICK IT!
9. Success? Great! Restart the phone and progress to the next step!
10. Failure? Untick the Preloader partition and repeat from step 5. Still not working? Also untick USRDATA and try again.
4. Flashing the: "G750-U10 to G750-T00" Firmware
This will be almost the same as part 3.
Extract the "G750-T00_mod8_265_FlashTool" rar file, and:
3. Open the flash_tool.exe file, which is used to flash the device (like the name suggests )
4. Once the program is open, click on the "scatter-loading" button. Search for the USB_Upgrade folder, and select the MT6592_Android_scatter.txt file (make sure that you select the scatter file from the new rar file, and that you are not using the same one as before).
5. Turn off your device, remove the battery, wait a few seconds and reinsert the battery back into the device. Do NOT turn on the device.
6. Make sure SP_Flash_Tool is set to "Download only" (can be set by the dropdown box)
7. Click the "Download" button, and connect your device to your PC.
8. Wait, and the progress bar will fill up. DO NOT DISCONNECT YOUR DEVICE OR YOU COULD BRICK IT!
9. Success? Great! Restart the phone and progress to the next step!
10. Failure? Untick the Preloader partition and repeat from step 5. Still not working? Also untick USRDATA and try again.
5. Restoring your NVRam and IMEI
You might need to root your device again, check if need be, by searching for an app called SuperSU or RootKing. If they are not present, root the device again with Root Genius.
You will need to re-install the "adbd" app on your new ROM. If there is no Play Store present, search for a Play Store APK on Google. Once, installed check the 2 tickboxes and re-open MTK Droid Tools.
Click on the "IMEI/NVRAM" button restore your backed-up NVRAM and retype you IMEI codes. Once the restores are done, restart the phone and check if you can call someone. If it works, good job! You can now progress to the very last step! If not, check if you entered the IMEI correct. You probably made a Typo.
6. Installing final ROM
Now that you have installed pavel22's ROM, you have access to a recovery system. So copy the whole 3rd zip file to the root folder of you device. Turn off your device, and turn it on again but this time while holding both volume buttons and the power button until TWRP opens. Click on install, search your zip file and swipe right. When it finishes, do a factory reset from TWRP and then reboot the system normally. You should now have a fully working G750-U10 with Android 4.4.2. Congratulations!
This was my tutorial and personal experience with converting my G750-U10 to Android 4.4.2. It has been a wild ride, and i've reached points that I wanted to throw my device against the wall. I'm now very happy with my (feeling like) new device. I can now finally catch 'em all and become the best PokéMaster ever!
~ NeusAap.
Click to expand...
Click to collapse
I can't download the KitKat rom from needrom.is there any other link?????
Hi mates! I'm stuck in the bootloader unlock step; it keeps showing the 0x7000 error and it doesn't let me flash anything with the SP Flash Tool (guess it's because of the 0x7000 error). I tried to follow the Pavel22 guide posted up there... i can flash the rework-secro succesfully, but i get the 4008 error when flashing the whole rom. Can someone help me? Thanks!!

[GUIDE]How to Root Honor 9 Oreo

!Disclaimer: You will void your warranty by proceeding with this process! Make sure to check every step and backup your own data. I am not responsible for you soft or hard-bricking your phone. This tutorial is for the Honor 9 STF-L09C432B36(0/2/3/4/5/6/7/8). Other versions may work or may not!
Pre requirements:
-A working pc with internet connection
-your phone
-pin set in android (lock screen)
-USB type c connector
-read everything carefully
-proceed with caution
-rather ask, than doing something you don't understand or you are unsure of
Credits go to:
-xzx0O0
-topjohnwu
-k1ks
1.UNLOCKING THE BOOTLOADER
!If the phone perfoms a bootloader unlock, a factory reset will be perfomed automatically. So you will have to backup your data to a sdcard or to the pc.!
Step 1.1 and 1.4 are hanging together. They can be skipped with no worries, but I would recommend to do it. !THIS IS NOT A FULL BACKUP!
1.1 [OPTIONAL]BACKING UP PHONE SETTINGS:
1.1.1 Download and install Hisuite on your pc: http://consumer.huawei.com/minisite/HiSuite_en/
1.1.2 Connect your pc with your phone
1.1.3a If you see a pop up like this,then choose transfer files and skip Step 1.1.3b
1.1.3b Go to your Notifications on your phone. There will be a settings notification. Press on it and select File transfer via USB.
1.1.4 On your phone go to Settings -> Security & privacy -> More -> and turn on allow Hisuite to use HDB (image)
1.1.5 The phone may ask you to trust the pc. Select always trust this pc (image)
1.1.6 Go to settings -> System -> About phone -> and press about 10 times on the build number.
1.1.7 Go to settings -> System -> Developer Options -> and turn on USB debugging (image)
1.1.8 Open Hisuite on pc
1.1.9 Choose Backup and select everything. Don't password protect it.
1.2 OBTAINING THE UNLOCK CODE
Everything you see below in pink does not work anymore since Huawei has officially stopped providing the bootloader unlock code on their website.
Instead please use this thread for obtaining your bootloader unlock code: https://forum.xda-developers.com/honor-7x/how-to/how-to-unlock-huawei-bootloader-removal-t3780903
1.2.1 Go to this website and press Unlock
1.2.2 Register a huawei id or login
1.2.3 Follow the steps until you see this page
1.2.4 Choose Since Emui 5.0
1.2.5 Fill out the rest of the information. (The IMEI can be found at settings -> System -> About Phone)
1.2.6 Press Commit. If every info was put in correct, A yellow message should appear saying: "Your unlocking password is: ..." Copy the code somewhere safe on your pc.
1.3 UNLOCKING THE BOOTLOADER
1.3.1 Download Minimal ADB and fastboot for your operating system. For windows 32 and 64bit: https://androidfilehost.com/?fid=746010030569952951
1.3.2 install and open the folder where you installed it to.
1.3.3 Run fastboot.exe and adb.exe once
1.3.4 Go to Settings -> System -> developer options turn on OEM unlocking. If you do not have developer options do step 1.1.6 and come back to 1.3.4.
1.3.5 Connect your phone with the pc and turn on USB Debbuging(Step 1.1.7) and file transfer via adb(Step 1.1.3b) on your phone
1.3.6 On your pc go to the folder where you have installed adb. Open a CMD Windows at this folder(For Windows hold leftshift and press right click. Then choose open cmd from this folder)
1.3.7 Make sure that usb debugging is still enabled. In CMD: type adb devices -> hit enter. It should say your serial number with the status "device" (image)
If that is not the case, check if 1.USB Debugging is enabled 2. Allow Transfer files in Notifications.
1.3.8 type in CMD adb reboot bootloader. Your device will reboot into the bootloader.
1.3.9 It should say FRP Unlock and PHONE locked.
If FRP is locked and green, you did not enable oem unlock. => Hold the power button to reboot and go back to step 1.3.4
1.3.10 type in CMD fastboot oem unlock code replace code with the number from Step 1.2.6. Hit enter.
1.3.11 A window will pop up asking you if you want to unlock the bootloader. !Pressing yes will void your warranty and perform a factory reset deleting all personal data on internal storage.! With your volume up and down keys navigate to yes and press the power button to proceed. Your device will automatically reboot and perform a factory reset and reboot again.
1.3.12 Put in all your information, so that the phone is fully usable again
[OPTIONAL]1.4 REAPLYING PHONE SETTINGS
1.4.1 Repeat Step 1.1.2, 1.1.3, 1.1.4, 1.1.5, 1.1.6, 1.1.7 and 1.1.8
1.4.2 In Hisuite press restore and choose the backup you have created in Step 1.1.9
2.FLASHING AND SETTING UP TWRP
2.1 FLASHING TWRP
2.1.1 Set a pin for your phone if you have not (lockscreen). Go to this thread and download stf-twrp-zxz-0.3.img and this kernel
2.1.2 Move both .img to your folder, where you have installed adb
2.1.3 Do Step 1.3.5, 1.3.6, 1.3.7 and 1.3.8
2.1.4 It should say FRP Unlock and PHONE Unlocked(image) => Step 2.1.5 . If Phone is locked and green, you did not unlock your bootloader => Step 1.3.
2.1.5 in CMD type fastboot flash recovery_ramdisk stf-twrp-zxz-0.3.img => hit enter.
2.1.6 type fastboot reboot in CMD to reboot. Do not close CMD window and do not unplug phone from pc if you continue with 2.2.
2.2 SETTING UP TWRP
2.2.1 Do Step 1.3.5, 1.3.6, 1.3.7
2.2.2 in CMD type adb reboot recovery_ramdisk => hit enter
2.2.3 wait for it to boot. It will ask you for a password. You can choose whatever you want. I would recommend you use your PIN to unlock your phone. REMEMEBER IT!
2.2.4 Then this screen will appear. Swipe to allow modifications.
2.2.5 Press Reboot -> System and do not install the twrp app.
2.2.6a If your on screen buttons and flash are working skip step 2.2.6b
2.2.6b If your on screen buttons are not working => connect phone to pc and connect with adb correctly. In CMD press adb reboot bootloader to reboot into the bootloader. Then flash the custom kernel in CMD , by pressing fastboot flash kernel KERNEL_B360a_TOUCH_FIX.img and hit enter to flash. Then reboot your phone with fastboot reboot
2.2.7 !Read through this whole thread to check which functions of TWRP are working and which not!
3. ROOTING WITH MAGISK
3.1.1 Download Magisk v-16.0 from here and the uninstaller from here.
3.1.2 Connect phone with PC. Activate file transfer via USB in Notifications. Move the Magisk-v16.0.zip and uninstaller.zip to the root of your internal storage or sdcard on your phone.
3.1.3 Do Step 1.3.5, 1.3.6 and 1.3.7 . Type in cmd adb reboot recovery_ramdisk => hit enter.
3.1.2 Type in your password from Step 2.2.3. Press on Install. Select the storage where you put both .zip from Step 3.1.2. Search and press on Magisk-v16.0.zip. Swipe to flash. Then press on reboot to System.
Nice thread. Good.
If the site is long or bug at wish , do not answer for ask code.
Use a VPn or Proxy.
Hi,
is this guide still valid? I will get my phone next weekend. I cannot find "Unlock" at https://emui.huawei.com/.
Saftpresse99 said:
Hi,
is this guide still valid? I will get my phone next weekend. I cannot find "Unlock" at emui huawei com/.
Click to expand...
Click to collapse
I've tried to get the unlock code from the site for three days to no avail. It always just redirects to front page as there doesn't seem to be any unlock page anymore. So if anyone has any better luck with this please share
Saftpresse99 said:
Hi,
is this guide still valid? I will get my phone next weekend. I cannot find "Unlock" at https://emui.huawei.com/.
Click to expand...
Click to collapse
anon9000 said:
I've tried to get the unlock code from the site for three days to no avail. It always just redirects to front page as there doesn't seem to be any unlock page anymore. So if anyone has any better luck with this please share
Click to expand...
Click to collapse
I wrote an email to my regional Huawei Support, and they replied that if i sent them my model, IMEI etc, they will resend unlock code. So try this guys
Saftpresse99 said:
Hi,
is this guide still valid? I will get my phone next weekend. I cannot find "Unlock" at https://emui.huawei.com/.
Click to expand...
Click to collapse
Yes I'm sorry that I am replying so late.
So noone really knows if it is going to come back, but here's what you can do:
1: Go to this site. Scroll down. Choose your country. Call the hotline. Give them the required info. They will send you the unlock-code via Email. I tried it with the German Number and they send it to me without a problem.
2: Try emailing the support from Honor or Huawei.
3: Try out this Thread. You will have to pay about 4 EUR ($5).
Lukalion said:
Yes I'm sorry that I am replying so late.
So noone really knows if it is going to come back, but here's what you can do:
1: Go to this site. Scroll down. Choose your country. Call the hotline. Give them the required info. They will send you the unlock-code via Email. I tried it with the German Number and they send it to me without a problem.
2: Try emailing the support from Honor or Huawei.
3: Try out this Thread. You will have to pay about 4 EUR ($5).
Click to expand...
Click to collapse
How long did it take for you to get the unlock? I just called and they told me it should take about two weeks
shiboby said:
How long did it take for you to get the unlock? I just called and they told me it should take about two weeks
Click to expand...
Click to collapse
Try calling different phone numbers. Some are willing to give you the unlock and some not. I think they also don't know whats really going on with the site etc. But as of right now the 3 ways mentioned above, are the only ways to get the unlock code. Maybe the Unlock site at https://emui.huawei.com/ will come back some time.
Thank you for writing this tutorial, it's really helpful to have all steps in one place to know what to do.
If you could include how to revert back to the locked bootloader with stock firmware, that can be sent back to Huawei for warranty repairs, that would be great!
Best,
Chris
Hi
I did everything like in instructions and its gone well.
then i decided to install module in magisk to hide navigation bar and now my phone has a black screen and i can only turn it off... anyone knows how to fix it?
KubaEM said:
Hi
I did everything like in instructions and its gone well.
then i decided to install module in magisk to hide navigation bar and now my phone has a black screen and i can only turn it off... anyone knows how to fix it?
Click to expand...
Click to collapse
1. Go this thread and download the Mount-Magisk.zip
2. Move it somewhere to your phone. (If you are unable to boot to system connect phone to PC. Reboot phone to twrp. Open a adb window on the PC. In twrp go to advanced. Start the adb sideload. Press on cancel and then on back. Move the Mount-Magisk.zip into your adb folder on the pc. In the cmd type adb push Mount-Magisk.zip /external_sd or which ever path you like. )
3. Boot to twrp.
4. Go to Install and choose the Mount-Magisk.zip . Flash it. After flash press on back.
5. Go to Advanced -> File Manager. At the very top/root of your system should now be a folder called Magisk. Open the folder. The next folders also should include your Modules. Hold the folder of the module and delete it.
6. Reboot and everything should be fixed.
Let me know if it worked! :good:
Just to let everyone know. The unlock page is back. :highfive::laugh::laugh::laugh: Happy Unlocking :good::victory::victory::victory:
Lukalion said:
Just to let everyone know. The unlock page is back. :highfive::laugh::laugh::laugh: Happy Unlocking :good::victory::victory::victory:
Click to expand...
Click to collapse
Yeah... Its back for about 2 months, and then it will be closed pernamently
click
So if I unlock bootloader, and then root my device then i won't receive any OTA update anymore... but how can I deal with this situation in order to re-lock when it's OTA time and unlock again when I got it?
ps. No OTA means only no firmware or it means also no security patches ??
ov3rlordRAGE said:
So if I unlock bootloader, and then root my device then i won't receive any OTA update anymore... but how can I deal with this situation in order to re-lock when it's OTA time and unlock again when I got it?
ps. No OTA means only no firmware or it means also no security patches ??
Click to expand...
Click to collapse
In case of Honor devices, to a certain point you are still getting ota updates. To check on the newest updates download the app Huawei Firmware Finder. Then follow the HuRUpdate Thread to update to the newest firmware without unrooting.
hi, magisk automatically closes after about 3 seconds, how can I solve this problem?
listo09 said:
hi, magisk automatically closes after about 3 seconds, how can I solve this problem?
Click to expand...
Click to collapse
Try reflashing Magisk in TWRP.
listo09 said:
hi, magisk automatically closes after about 3 seconds, how can I solve this problem?
Click to expand...
Click to collapse
Issue Magisk FC , when you open Magisk , go direct on 'About' .
This will keep it open.
Some solutions should be on official section for Magisk
Lukalion said:
Try reflashing Magisk in TWRP.
Click to expand...
Click to collapse
Funziona, grazie
Hi! I'm currently attempting to complete step 2.1, but I've run into a problem.. I've completed all the 1.-steps and added the twrp & kernel img-files to the adb folder, but when I attempt to use cmd fastboot flash recovery_ramdisk stf-twrp-zxz-0.3.img, I just get the response waiting for any device, and then nothing else happens. Any suggestions?

How To Guide Guide to root Galaxy Z Flip 3 (B/N/0), unlock bootloader and flash official firmware (noob friendly)

Code:
Your warranty is now void.
If you root your device, Your KNOX status will be tripped.
You can still pass the safety net after you root if you follow the instructions.
I am not responsible for bricked devices, dead SD cards although it is not really possible
Please do some research if you have any concerns about doing this to your device
How to flash official firmware? (not the root and unlock bootloader part!)
You will need:
A Galaxy Z Flip 3 and common sense
Samsung Odin (the flashing tool of the official firmware)
https://dl2018.sammobile.com/Odin3-v3.14.1.zip
You need to extract the zip file and you are going to use the file Odin3_v3.14.1.exe inside the folder.
Samsung Android USB Driver for Windows
Samsung Android USB Driver | Samsung Developers
You need the driver only if you are developing on Windows and want to connect a Samsung Android device to your development environment over USB.
developer.samsung.com
Double-click and install the exe file.
Samsung Official Firmware
Release 1.0.3 · zacharee/SamloaderKotlin
Contribute to zacharee/SamloaderKotlin development by creating an account on GitHub.
github.com
Download the platform you want to download to. (Windows)
You need to extract the zip and double click open the file Bifrost.exe inside the folder.
You need to fill in the Model, Region, press the Check for Updates button and the Download button.
How to find the Model: on your phone → Settings → About Phone → The third row says the Model number and you need to remove the part with the part of /xx, for example, SM-F711B/DS and you only need to type SM-F711B
How to find the Region: You can check the Region at this link https://samfrew.com/model/SM-F711B/
You need to find find a three-letter word (CSC) depending on your carrier and country and type it in Bifrost, for example, EVR
Press the Check for Update button and download it with the Download button.
Put it to a place you can easily find, ie. Desktop.
After downloading it, find the file SM-xxxxx_x_xxxxxxxx_xxx.zip.enc4 on the place you put it and change the document format from .enc4 to .zip. Then, double click and extract the file.
Open Odin3_v3.14.1.exe and turn off your phone. Connect a side of your USB to your PC/Laptop, keep pressing volume up and down together until you go to Download Mode. Put another side of the USB into your phone. When you arrived at Download Mode press volume up. Go back to Odin3_v3.14.1.exe:
-Click on BL and select BL_xxxxxxxxxx.tar.md5
-Click on AP and select AP_xxxxxxxxxxx.tar.md5
-Click on CP and select CP_xxxxxxxxxx.tar.md5
-Click on CSC and select CSC_OMC_xxxxxxxxxx.tar.md5
Press Start to flash the firmware, after done, your device will automatically reboot to the system.
How to unlock the bootloader?
Go to your phone → Settings → About Phone → Software information → Press Build number 6 times until you see the notice “You’re now a developer”
Go in Settings → Developer options → enable OEM unlocking
Power off your phone first. Then, connect a side of your USB to your PC/Laptop, keep pressing volume up and down together until you go to Download Mode. Put another side of the USB into your phone.
When you arrived at Download Mode, long press volume up until you see the black screen. Confirm to unlock the bootloader and you will erase your device.
How to root your phone?
After you unlock your bootloader, you set up your phone and make sure you do not sign in google account first. Install Magisk https://github.com/topjohnwu/Magisk/releases/download/v24.1/Magisk-v24.1.apk on your phone. Oh yes, in case you do not know, you need to allow the app to install apps so that you can install the apk.
Transfer AP_xxxxxxxxxx.tar.md5 in the firmware you download from your PC/Laptop to your phone.
Open Magisk on your phone and press the install button in the Magisk column. Select 'Select and Patch a File', 'Let's Go' and find the AP_xxxxxxxxxx.tar.md5 and select it. You can have a cup of coffee if you like when you waiting for the patching of the file.
After finishing the patching, you need to transfer the file magisk_patched-24xxx_xxxxx.tar in the Downloads folder back to your PC/Laptop.
Turn off your phone. Connect a side of your USB to your PC/Laptop, keep pressing volume up and down together until you go to Download Mode. Put another side of the USB into your phone. When you arrived at Download Mode press volume up. Open Odin3_v3.14.1.exe on your PC/Laptop:
Click on BL and select BL_xxxxxxxxxx.tar.md5
-Click on AP and select magisk_patched-24xxx_xxxxx.tar
-Click on CP and select CP_xxxxxxxxxx.tar.md5
-Click on CSC and select CSC_OMC_xxxxxxxxxx.tar.md5
When it finishes flashing it, it will automatically reboot and you can gain root access.
Optional: If you want to have the safety net passed (most of the banking apps use it), then you need to install the zip
as a Magisk module in Magisk https://github.com/kdrag0n/safetynet-fix/releases
How? Go to Magisk → Modules → install from storage and select the zip you downloaded.
Is this device specific or should this work with all models?
phatmanxxl said:
Is this device specific or should this work with all models?
Click to expand...
Click to collapse
For all devices but USA locked Snapdragon
Does anyone know if the Canadian SM-F711W can be rooted? Or is it like the USA models and locked out.
Just wondering if it is better to get a F711B model from the UK since I'm looking to upgrade from my Canadian Galaxy S9+ that can't be rooted.
thank you for the guide! are you sure that HOME_CSC_OMC_xxxxxxxxxx.tar.md5 should be put on USERDATA field? In the past we used to put it in the CSC (since we are not flashing CSC to keep our data)
Tw1tchy said:
Does anyone know if the Canadian SM-F711W can be rooted? Or is it like the USA models and locked out.
Just wondering if it is better to get a F711B model from the UK since I'm looking to upgrade from my Canadian Galaxy S9+ that can't be rooted.
Click to expand...
Click to collapse
I think both of them can be rooted. You can have a try.
mez981 said:
thank you for the guide! are you sure that HOME_CSC_OMC_xxxxxxxxxx.tar.md5 should be put on USERDATA field? In the past we used to put it in the CSC (since we are not flashing CSC to keep our data)
Click to expand...
Click to collapse
Ah, stuff had changed. You can now put home_csc or csc to csc field or both of them. You can put nothing to userdata field too
so stick with don't put CSC since want to keep data?
Clusco said:
so stick with don't put CSC since want to keep data?
Click to expand...
Click to collapse
If you unlock your bootloader, you will lost all your data definitely. However, if you just want to update the system without losing root and data, you will need to flash userdata in the CSC field
My bootloader is unlocked as previously I had root it and went back to official firmware. Now I want to have root but without losing current data.. Thanks
Clusco said:
My bootloader is unlocked as previously I had root it and went back to official firmware. Now I want to have root but without losing current data.. Thanks
Click to expand...
Click to collapse
Flash the Magisk patched AP file in the AP slot and the HOME CSC in the CSC slot, I wouldn't go flashing anything in the USERDATA slot that sounds like bad advice.
beanbean50 said:
Flash the Magisk patched AP file in the AP slot and the HOME CSC in the CSC slot, I wouldn't go flashing anything in the USERDATA slot that sounds like bad advice.
Click to expand...
Click to collapse
Yes, that is the correct way to re-root
I've got a Canadian device ending in W. Is this possible? I heard USA and Canadian devices were locked the same way.
DefeatedSouls said:
I've got a Canadian device ending in W. Is this possible? I heard USA and Canadian devices were locked the same way.
Click to expand...
Click to collapse
No, USA and Canadian model’s bootloaders are locked. So, you cannot root your device unfortunately
Williamtung said:
No, USA and Canadian model’s bootloaders are locked. So, you cannot root your device unfortunately
Click to expand...
Click to collapse
Dang it okay. Thanks mate!
DefeatedSouls said:
Dang it okay. Thanks mate!
Click to expand...
Click to collapse
You are welcome
wait for 4.1... then gonna root it....
Clusco said:
wait for 4.1... then gonna root it....
Click to expand...
Click to collapse
For me, I just unlock the bootloader and root first. Then, I will root Android 12 again later when I received it
Clusco said:
wait for 4.1... then gonna root it....
Click to expand...
Click to collapse
Why wait to who knows when, it's only odin flashing two files to root or unroot?
Magisk patched AP file in the AP slot and HOME CSC in the CSC slot
Williamtung said:
Code:
Your warranty is now void.
If you root your device, Your KNOX status will be tripped.
You can still pass the safety net after you root if you follow the instructions.
I am not responsible for bricked devices, dead SD cards although it is not really possible
Please do some research if you have any concerns about doing this to your device
How to flash official firmware? (not the root and unlock bootloader part!)
You will need:
A Galaxy Z Flip 3 and common sense
Samsung Odin (the flashing tool of the official firmware)
https://dl2018.sammobile.com/Odin3-v3.14.1.zip
You need to extract the zip file and you are going to use the file Odin3_v3.14.1.exe inside the folder.
Samsung Android USB Driver for Windows
Samsung Android USB Driver | Samsung Developers
You need the driver only if you are developing on Windows and want to connect a Samsung Android device to your development environment over USB.
developer.samsung.com
Double-click and install the exe file.
Samsung Official Firmware
Release 1.0.3 · zacharee/SamloaderKotlin
Contribute to zacharee/SamloaderKotlin development by creating an account on GitHub.
github.com
Download the platform you want to download to. (Windows)
You need to extract the zip and double click open the file Bifrost.exe inside the folder.
You need to fill in the Model, Region, press the Check for Updates button and the Download button.
How to find the Model: on your phone → Settings → About Phone → The third row says the Model number and you need to remove the part with the part of /xx, for example, SM-F711B/DS and you only need to type SM-F711B
How to find the Region: You can check the Region at this link https://samfrew.com/model/SM-F711B/
You need to find find a three-letter word (CSC) depending on your carrier and country and type it in Bifrost, for example, EVR
Press the Check for Update button and download it with the Download button.
Put it to a place you can easily find, ie. Desktop.
After downloading it, find the file SM-xxxxx_x_xxxxxxxx_xxx.zip.enc4 on the place you put it and change the document format from .enc4 to .zip. Then, double click and extract the file.
Open Odin3_v3.14.1.exe and turn off your phone. Connect a side of your USB to your PC/Laptop, keep pressing volume up and down together until you go to Download Mode. Put another side of the USB into your phone. When you arrived at Download Mode press volume up. Go back to Odin3_v3.14.1.exe:
-Click on BL and select BL_xxxxxxxxxx.tar.md5
-Click on AP and select AP_xxxxxxxxxxx.tar.md5
-Click on CP and select CP_xxxxxxxxxx.tar.md5
-Click on CSC and select CSC_OMC_xxxxxxxxxx.tar.md5
Press Start to flash the firmware, after done, your device will automatically reboot to the system.
How to unlock the bootloader?
Go to your phone → Settings → About Phone → Software information → Press Build number 6 times until you see the notice “You’re now a developer”
Go in Settings → Developer options → enable OEM unlocking
Power off your phone first. Then, connect a side of your USB to your PC/Laptop, keep pressing volume up and down together until you go to Download Mode. Put another side of the USB into your phone.
When you arrived at Download Mode, long press volume up until you see the black screen. Confirm to unlock the bootloader and you will erase your device.
How to root your phone?
After you unlock your bootloader, you set up your phone and make sure you do not sign in google account first. Install Magisk https://github.com/topjohnwu/Magisk/releases/download/v24.1/Magisk-v24.1.apk on your phone. Oh yes, in case you do not know, you need to allow the app to install apps so that you can install the apk.
Transfer AP_xxxxxxxxxx.tar.md5 in the firmware you download from your PC/Laptop to your phone.
Open Magisk on your phone and press the install button in the Magisk column. Select 'Select and Patch a File', 'Let's Go' and find the AP_xxxxxxxxxx.tar.md5 and select it. You can have a cup of coffee if you like when you waiting for the patching of the file.
After finishing the patching, you need to transfer the file magisk_patched-24xxx_xxxxx.tar in the Downloads folder back to your PC/Laptop.
Turn off your phone. Connect a side of your USB to your PC/Laptop, keep pressing volume up and down together until you go to Download Mode. Put another side of the USB into your phone. When you arrived at Download Mode press volume up. Open Odin3_v3.14.1.exe on your PC/Laptop:
Click on BL and select BL_xxxxxxxxxx.tar.md5
-Click on AP and select magisk_patched-24xxx_xxxxx.tar
-Click on CP and select CP_xxxxxxxxxx.tar.md5
-Click on CSC and select CSC_OMC_xxxxxxxxxx.tar.md5
When it finishes flashing it, it will automatically reboot and you can gain root access.
Optional: If you want to have the safety net passed (most of the banking apps use it), then you need to install the zip
as a Magisk module in Magisk https://github.com/kdrag0n/safetynet-fix/releases
How? Go to Magisk → Modules → install from storage and select the zip you downloaded.
Click to expand...
Click to collapse
In developer options theres no oem unlock switch ? Please help anyone

Categories

Resources