Hey everyone;
I've been experiencing a problem with my phone recently(Samsung Galaxy S Plus GTi9001). It's been bootlooping all of a sudden with no apparent cause after average usage. I have scoured the internet for a solution, but to no avail. I shall try to summarize everything that led up to this in this post:
I had installed Chritopher83's CM12 custom rom on the device using the given instructions and the specially partitioned TWRP recovery provided.
Everything worked smoothly for a couple of months with the only oddity being optimisation of apps on every boot, which used to take uncharacteristically long.
Then I faced this problem:https://www.youtube.com/watch?v=Kr46ugrpL6U. The device boots normally until the TWRP logo and flashes over and over again. From what I've been able to gather, this is due to an error in the bootloader.
I'm unable to access recovery to perform a data reset or reflash a new rom. When I try to connect it to a PC, I get the error "USB device not recognised". This also prevents me from using adb or ODIN to flash anything(using adb gives me the "waiting for device" forever). I tried following the advice mentioned in the FAQ of the ROM herehttp://forum.xda-developers.com/showpost.php?p=24831012&postcount=1330, but even that gets stuck at waiting for device.
Hoping for your help in resolving this problem...
Related
Greeting to all,
i have bricked my phone here is how;
i tried to increase cpu speed to 2gh by installing ElementalX and my phone does not boot after that, so i tried to delet it but i wiped all system, now the phone will not swith on it stuck on htc logo,
i downloaded toolkit which have all commands, i downloaded many ruu version but no luck, all installation will fail
i tried push the zip through adb and even try to installed through 'install ruu factory' command but no joy, some ruu will progress to 100% on my pc but will fail to installed in the phone it says failed to install error 12
i am with meteor network in ireland, i appreciate if any one can help.
i tried about 20 hours but no luck at all, there is no system in the phone all wiped out , even i tried few ruu.exe still doe not work i be happy if i be able to get it back to work rooted or unrooted.
now through the tool i can easily unlock and relock the boot loader and i know to go to fastboot or recovery mode that is all i know.
thanks in advance.
soleved
Never mind no one seems to help, well i fixed after lots try and suffer. case closed.
Hi,
I'm facing similar problem - what steps did you took to fix it?
Hi, I'm a noob to this site and is my last call of action ive tried everything to get my phone working but I'm at a lost end now and getting frustrated.
If anyone can help me with my problem it will be much appreciated and a lot of pressure taken off me. to start with I towel rooted my xperia sp (c5303) which gave me root. I then installed a recovery called philz which worked great. installed lollipop all fine booted up but no data signal bar had explanation mark. I tried the data fix through recovery did not work so I thought il flash my device again to see if it rectifies my problem so I deleted all data cache delvic cache chose the file off sd card that I previously used but this time I got an error. and the phone just restarted . so I assume there is nothing on my phone now no firmware as it turns on comes up with the sony logo but hangs after a minute or so my phone turns its self off. I plug my phone into pc usb and the lightbar turns green at the bottom then after 40 seconds goes red with the sony logo again then after a minute reboots to green and so on in a boot loop state. I have tried flashing my phone to stock with flashtools but it gets so far then gives error that I don't have usb debugging and unknown sources enabled. I cant have them enabled as I cant access my phone. I have gone into flash tool drivers folder downloaded flashmode drivers and fastboot and viskan board it starts to install them comes up with welcome to device driver installation . sony(winusb) says failed. Google inc (winusb) says failed sony ericsson mobile communication says failed I assume it cant see my phone. I just don't understand what to do next.
If any body has had this problem could you please shed a little light, Thanks for taking time out to read this.
Chris
chris10286 said:
Hi, I'm a noob to this site and is my last call of action ive tried everything to get my phone working but I'm at a lost end now and getting frustrated.
If anyone can help me with my problem it will be much appreciated and a lot of pressure taken off me. to start with I towel rooted my xperia sp (c5303) which gave me root. I then installed a recovery called philz which worked great. installed lollipop all fine booted up but no data signal bar had explanation mark. I tried the data fix through recovery did not work so I thought il flash my device again to see if it rectifies my problem so I deleted all data cache delvic cache chose the file off sd card that I previously used but this time I got an error. and the phone just restarted . so I assume there is nothing on my phone now no firmware as it turns on comes up with the sony logo but hangs after a minute or so my phone turns its self off. I plug my phone into pc usb and the lightbar turns green at the bottom then after 40 seconds goes red with the sony logo again then after a minute reboots to green and so on in a boot loop state. I have tried flashing my phone to stock with flashtools but it gets so far then gives error that I don't have usb debugging and unknown sources enabled. I cant have them enabled as I cant access my phone. I have gone into flash tool drivers folder downloaded flashmode drivers and fastboot and viskan board it starts to install them comes up with welcome to device driver installation . sony(winusb) says failed. Google inc (winusb) says failed sony ericsson mobile communication says failed I assume it cant see my phone. I just don't understand what to do next.
If any body has had this problem could you please shed a little light, Thanks for taking time out to read this.
Chris
Click to expand...
Click to collapse
I have fixed it myself took me a week but I unlocked bootloader from sony did a full install of own rom, works perfect now. please close thread
chris10286 said:
I have fixed it myself took me a week but I unlocked bootloader from sony did a full install of own rom, works perfect now. please close thread
Click to expand...
Click to collapse
Glad you managed to fix it yourself.
If you have further questions, feel free to ask in the help thread for the Xperia SP
http://forum.xda-developers.com/xperia-sp/help
Thread closed.
I have a Proscan PLT7650G tablet it came installed with Android 5.1.1. It is running a RK3126 SoC. I had rooted it with Kingroot and then switched to SuperSU. I then tried to install Xposed framework for Lollipop using the Flashify app. The tablet rebooted and when I got to the login screen it had a message box "Stresstest for 5.0 has stopped running". When I hit OK another comes up that says "The process com.android.phone has stopped running". I hit OK and the previous message box comes up. This continues for as long as I keep pressing OK. Sometimes it also says that the System UI has stopped running. I cannot access any of the OS. I eventually tried to run the factory reset from recovery, and the same issue persisted. I assume this is because of the system partition being modified. I have backups of all the partitions made using the Rockchip Android tool. I tried to flash the tablet with the tool and it says Test device fail, or download fail. I have also tried to flash with Rockchip batch tool with firmware I thought may be compatible, and it gave me a similar message.
I didn't install custom recovery, but I can still access stock recovery, and can still get to the error messages after boot. I don't have USB development enabled, and fastboot doesn't recognize my bootloader.
Any help you can recommend will be extremely appreciated. I have spent the past week trying to get this thing running. I am very sorry if there is a similar thread posted somewhere or if it is a stupidly easy fix. I also apologize if this is posted in the wrong spot. I am new to forums in general.
I have very limited internet access, so it may take me several days to respond to any posts.
A HUGE thanks to anyone who can help me.
mordezmois said:
I have a Proscan PLT7650G tablet it came installed with Android 5.1.1. It is running a RK3126 SoC. I had rooted it with Kingroot and then switched to SuperSU. I then tried to install Xposed framework for Lollipop using the Flashify app. The tablet rebooted and when I got to the login screen it had a message box "Stresstest for 5.0 has stopped running". When I hit OK another comes up that says "The process com.android.phone has stopped running". I hit OK and the previous message box comes up. This continues for as long as I keep pressing OK. Sometimes it also says that the System UI has stopped running. I cannot access any of the OS. I eventually tried to run the factory reset from recovery, and the same issue persisted. I assume this is because of the system partition being modified. I have backups of all the partitions made using the Rockchip Android tool. I tried to flash the tablet with the tool and it says Test device fail, or download fail. I have also tried to flash with Rockchip batch tool with firmware I thought may be compatible, and it gave me a similar message.
I didn't install custom recovery, but I can still access stock recovery, and can still get to the error messages after boot. I don't have USB development enabled, and fastboot doesn't recognize my bootloader.
Any help you can recommend will be extremely appreciated. I have spent the past week trying to get this thing running. I am very sorry if there is a similar thread posted somewhere or if it is a stupidly easy fix. I also apologize if this is posted in the wrong spot. I am new to forums in general.
I have very limited internet access, so it may take me several days to respond to any posts.
A HUGE thanks to anyone who can help me.
Click to expand...
Click to collapse
Greetings,
Thank you for using XDA Assist. Please ask your question here:
Android Q&A
You'll receive expert advice there. Good luck!
Hi guys. My LG x145 has been bootlooping since Monday and I can't seem to fix it.
My brother tried to flash it with CM 11 and maybe messed with the steps and its been bootlooping since.
We have tested the phone to see if it's bootlooping on its own. We removed the battery for an amount of time then return it in place to see if the phone will turn itself on. It didn't so flashing a rom to the phone and messing up the process must have lead to the device bootlooping.
We can't:
enter recovery mode
enter download mode
enter bootloader
Whenever we tried booting the phone to recovery mode, the phone would start up normally and display the LG logo with a note below it that it is booting up in recovery mode. But after a few seconds, it would turn itself off and on again.
--------
We tried:
using adb to boot in the aforementioned boot states
flashing it with lg flash tool 2014
following some posted answers in some forums with the use of lg mobile support and lg pc suite
-------
The problem with the above is that the device can't be detected despite having installed the drivers when I rooted the phone last year. I rooted the phone using my laptop and kingo root.
Any form of help is much appreciated. Thanks in advance.
dcd3lt4 said:
Hi guys. My LG x145 has been bootlooping since Monday and I can't seem to fix it.
My brother tried to flash it with CM 11 and maybe messed with the steps and its been bootlooping since.
We have tested the phone to see if it's bootlooping on its own. We removed the battery for an amount of time then return it in place to see if the phone will turn itself on. It didn't so flashing a rom to the phone and messing up the process must have lead to the device bootlooping.
We can't:
enter recovery mode
enter download mode
enter bootloader
Whenever we tried booting the phone to recovery mode, the phone would start up normally and display the LG logo with a note below it that it is booting up in recovery mode. But after a few seconds, it would turn itself off and on again.
--------
We tried:
using adb to boot in the aforementioned boot states
flashing it with lg flash tool 2014
following some posted answers in some forums with the use of lg mobile support and lg pc suite
-------
The problem with the above is that the device can't be detected despite having installed the drivers when I rooted the phone last year. I rooted the phone using my laptop and kingo root.
Any form of help is much appreciated. Thanks in advance.
Click to expand...
Click to collapse
Hi
Thank you for using XDA Assist
Sorry for the inconvenience. Cant find any specific thread for your device but you may post here for now
http://forum.xda-developers.com/android/help
Thank you..
I need Help My Lenovo Yoga tab 3 8 inch (850M) was soft bricked after using superSu me to replace kingsu with SuperSU.
After its finish it was working good until i restarted my device it keeps showing black powered screen with nothing even not the floating home,back bar.
Then i`ve tried to boot into recovery and wipe data and factory reset then i restart my device.
and now it stuck at lenovo logo and not showing anything else.
Then I`ve thought i should download stock rom zip and I`ve already downloaded 2 Stock roms from different sites and i put them into SD card then i have tried to flash it after wiping data but
It also stuck in verifying package data while flashing and i`ve waited about 1 hour with nothing new.
Then I have tried to flash it using ADB update, but it keeps telling cancelled
After all of these trials i thought if i replace the recovery by new recovery it`ll work
but I didn`t find how to access download mode in my tab ( the tab has no hard home button) and i `ve tried booting into download mode using ADB but also failed
Then I found a tool called SP Flash Tool but it needs a scatter loading file which i didn`t find !
I donno what else should I do I need help please
aman_a7med said:
I need Help My Lenovo Yoga tab 3 8 inch (850M) was soft bricked after using superSu me to replace kingsu with SuperSU.
After its finish it was working good until i restarted my device it keeps showing black powered screen with nothing even not the floating home,back bar.
Then i`ve tried to boot into recovery and wipe data and factory reset then i restart my device.
and now it stuck at lenovo logo and not showing anything else.
Then I`ve thought i should download stock rom zip and I`ve already downloaded 2 Stock roms from different sites and i put them into SD card then i have tried to flash it after wiping data but
It also stuck in verifying package data while flashing and i`ve waited about 1 hour with nothing new.
Then I have tried to flash it using ADB update, but it keeps telling cancelled
After all of these trials i thought if i replace the recovery by new recovery it`ll work
but I didn`t find how to access download mode in my tab ( the tab has no hard home button) and i `ve tried booting into download mode using ADB but also failed
Then I found a tool called SP Flash Tool but it needs a scatter loading file which i didn`t find !
I donno what else should I do I need help please
Click to expand...
Click to collapse
Greetings!
Thank you for using XDA Assist.
Please consider posting your question in a friendly ask any question thread found here:
http://forum.xda-developers.com/showthread.php?t=2259645
You'll find expert advice there.
Good luck!