I wanted to install lollicop ROM that I downloaded from a thread in this forum.
It happened when I flashed TWRP by Rashr App and rebooted my phone
It got stuck on screen that's saying
[ODIN3]
PRODUCT: GT-I8262
VERSION: I 8262XXBNH1
HW REV: 8
CUSTOM BINARY DOWNLOAD: NO
CURRENT BINARY: SAMSUNG OFFICIAL
SYSTEM STATUS: CUSTOM
and below it a green Android logo followed by
Downloading......
Do not disconnect USB cable during the software update!
I tried everything,
Volume up+ home+ power
Volume down+home+power
Removed battery
Connected to PC with kies installed but Odin couldn't detect it so can't install recovery from PC
fastboot is not detecting my device
installed latest drivers for Galaxy core but still nothing
Please show me a way if I could do anything with the help of phone or my PC
I don't want to change motherboard guys please help:crying:
This happened to me. You might have gone in recovery using rashr. Just use volume dn+ home + power until you see warning keep holding vol dn and home but leave the power when phone vibrate.
Note - keep holding the two until you see a warning and press vol up on warning. Odin will detect you
---------- Post added at 09:36 AM ---------- Previous post was at 09:36 AM ----------
But You need odin
---------- Post added at 09:37 AM ---------- Previous post was at 09:36 AM ----------
And restart using it
---------- Post added at 09:37 AM ---------- Previous post was at 09:37 AM ----------
If works pls like
finally solved it
if other users facing same problem here is the solution stepwise
1. install samsung drivers from the original website of samsung only or from this thread http://forum.xda-developers.com/showthread.php?t=961956, there are a lot of drivers available on the internet don't pay attention on them, they don't work
2. download odin latest version
3. go into download mode- switch off the device
long press volume down+power+home button simultaneously, when the phone vibrates or something comes on screen, leave all butten,
you'll see a screen with two options
1. continue
2. restart phone
press volume up key for continue, now you see a logo of android and downloadin on screen-- hurrey- you're in download mode
4. connect your phone to pc with an original data cable
5. odin will detect your device where the ID is written, if it doesn't change port or usb
6. install twrp recovery on your phone with odin, download it from this post its working http://www.techdroider.com/2015/01/cwm-twrp-update-galaxy-core-i8262.html. chose PDA or AP option
7. when the odin displays pass disconnect phone
8. go into recovery mode- long press volume up+power+home all simultaneoulsy
when the logo of smasung appears leave the power key but keep pressing the volume up and home key
9. now you're in recovery mode, choose the download stock or custom rom from sd card,
there are other method too but i prefer this one, bcz its hasslefree and once you've installed custom recovery you don't need pc or any other thing to update or change your rom or whatever plus twrp supports touchscreen.
Thanks twrp and XDA for saving my money
WoW Alhamdulillah thanks brother :*
I have the same problem with you
You have saved my life and my money ^_^
ı have this problem but if ı do this will ı lose my data ??
Related
Hi all,
I have loaded the Oma JB v1.2.2 ROM onto my Cube U9GT2, and want to boot into CWM recovery mode so I can apply the required fix from the zipped file on my SD.
The ROM loaded on fine, and checked out ok, but the problem I have is not being able to load CWM after the update.
I have tried volume down on powering up, but all I get is a black screen (screen illuminated, but all black). From reading I thought all I needed to do was hold volume down while powering on, wait for some text to appear, then switch to volume up till loaded. Also, if I try to power up without using volume down I get the same illuminated but black screen, no booting up.
If I flash the Evolution ROM back on it works again no problem, but I would like to try the Oma JB v1.2.2.
Am I missing something obvious?
Any advice would be greatly appreciated.
Cheers
Hey,
Thanks for including all the necessary details.
To me it just seems like some sort of bug. I would recommend ditching the ROM itself. Obviously, it cannot access the CWM files but as to fixing it, I wouldn't know.
I can't say any more really as I have never experienced this.
Sorry about that.
Hello,
Funny !!! I have exactly the opposite problem ! I have also a window N90 tablet (U9GT2 clone). I have tried to install Oma JB v1.2.2 ROM onto my device. For me, I can't load android, I can only boot and the device crashes, on a screen (remember me windows). Impossible to turn on the device but I can access the CWM recovery mode and can apply the zip fix ! To enter the recovery mode I push volume down on powering on. The device is no more recognized by XP and RKandroid can not find the tablet !!!
Do you know if it is possible to install a new Rom from the CWM recovery mode ?
Thanks a lot your help
ck
spicysi said:
Hi all,
I have loaded the Oma JB v1.2.2 ROM onto my Cube U9GT2, and want to boot into CWM recovery mode so I can apply the required fix from the zipped file on my SD.
The ROM loaded on fine, and checked out ok, but the problem I have is not being able to load CWM after the update.
I have tried volume down on powering up, but all I get is a black screen (screen illuminated, but all black). From reading I thought all I needed to do was hold volume down while powering on, wait for some text to appear, then switch to volume up till loaded. Also, if I try to power up without using volume down I get the same illuminated but black screen, no booting up.
If I flash the Evolution ROM back on it works again no problem, but I would like to try the Oma JB v1.2.2.
Am I missing something obvious?
Any advice would be greatly appreciated.
Cheers
Click to expand...
Click to collapse
You should press both Volume up & Volume down button same time to enter CWM. That's how it works in my U9GT2 with Oma JB 1.2.1
---------- Post added at 07:48 PM ---------- Previous post was at 07:40 PM ----------
ck32 said:
Hello,
Funny !!! I have exactly the opposite problem ! I have also a window N90 tablet (U9GT2 clone). I have tried to install Oma JB v1.2.2 ROM onto my device. For me, I can't load android, I can only boot and the device crashes, on a screen (remember me windows). Impossible to turn on the device but I can access the CWM recovery mode and can apply the zip fix ! To enter the recovery mode I push volume down on powering on. The device is no more recognized by XP and RKandroid can not find the tablet !!!
Do you know if it is possible to install a new Rom from the CWM recovery mode ?
Thanks a lot your help
ck
Click to expand...
Click to collapse
It's possible if you have backup of working ROM and can restore it, otherwise propably not.
---------- Post added at 07:52 PM ---------- Previous post was at 07:48 PM ----------
j0vi said:
You should press both Volume up & Volume down button same time to enter CWM. That's how it works in my U9GT2 with Oma JB 1.2.1
---------- Post added at 07:48 PM ---------- Previous post was at 07:40 PM ----------
It's possible if you have backup of working ROM and can restore it, otherwise propably not.
Click to expand...
Click to collapse
To get to flashing mode in Windows
1. Shutdown your U9GT2
2. Press Volume down
3. While keeping Volume down pressed plug in USB cable (U9GT2 display stays blank. Do not press Power button)
4. Run RKAndroidTool.exe as Administrator
j0vi said:
You should press both Volume up & Volume down button same time to enter CWM. That's how it works in my U9GT2 with Oma JB 1.2.1
I have the same problem, can't get it to boot neither CWM recovery.
Click to expand...
Click to collapse
Hello
I bought an haipai i9377 (mtk6577). short after that i rooted it, (succesfull then when i tried to flash clockwork mod recovery( wich was build with CWM builder) it said ok but it ain't ok! (unsuccesfull
Now it wont boot and now i am stuck, i can still come into recovery. but download mode is not working any more.
Adb keeps telling me the device ' 1234567890abcdefg" dont know why that name, is offline BUT recognises it. when i put it in recovery windows detects it as an unknown device and when i install drivers it wont start. i don' t have really much options now i do got an backup of my recovery, bootloader and system image. But without getting into download mode or CWM i cant do really much with it ? HELP
P.S When there is no accu in it and put it into cable windows detects it for 2 seconds (preloader usb vcom android) ; Sound something is in* sound something is putted out*
Just had exactly the same problem here, Tried to update the bootloader and now I get nothing but the spinning nexus android logo and the USB is no longer being detected. Did you fix it?
---------- Post added at 08:36 AM ---------- Previous post was at 08:24 AM ----------
OK well 5 mins later I managed to fix it, Went into 'Factory' Mode - Hold down power, Menu Key and Volume down for about 4 seconds - As the tex came up on the screen to start the auto test, hold volume up to cancel the auto test, Menu appears - Select Clear eMMC - and it will reboot - all fixed.
For an unknown reason, I've lost my recovery and I cannot go in fastboot nor in flashboot mode, what to do ???
(my bootloader is unlocked)
Can you explain more, what you where doing? What did you tried and what steps?
gm007 said:
Can you explain more, what you where doing? What did you tried and what steps?
Click to expand...
Click to collapse
I wanted to do a backup, so I've restarted in recovery but I've realzed that I cannot enter in recovery.
So, I've tried to reflash a recovery.img going in fastboot mode (power off then power on and hold volume down) but my device don't want to go in fastboot mode, it just restart...
Turn the phone off,hold volume key and plug the usb it will boot in fastboot mode.
---------- Post added at 05:15 PM ---------- Previous post was at 05:12 PM ----------
Power off the phone completely.Make sure to plug the USB Cable into your PC, don’t plug it into your device just yet.Press and hold Volume UP button of your Xperia.
– do not release the button.Plug the USB cable into your smartphone now.Fastboot Mode should appear and the phone’s LED light will be BLUE
gm007 said:
Turn the phone off,hold volume key and plug the usb it will boot in fastboot mode.
---------- Post added at 05:15 PM ---------- Previous post was at 05:12 PM ----------
Power off the phone completely.Make sure to plug the USB Cable into your PC, don’t plug it into your device just yet.Press and hold Volume UP button of your Xperia.
– do not release the button.Plug the USB cable into your smartphone now.Fastboot Mode should appear and the phone’s LED light will be BLUE
Click to expand...
Click to collapse
No, unfortunately it does not work...
I cannot enter in fastboot mode, my device start normally...
Edit: problem solved using reboot bootloader from APM+ xposed module
Didn't know of http://forum.xda-developers.com/xposed/modules/advanced-power-menu-apm-t2842792
Glad it worked out for you
sweet ! gotta try this out
Hello Guys,
since i saw a a bunch of posts with: "Help stucked on bootlogo" , "wiped OS", etc. ,
and i've done it by my selfe ^^ ,
I found the answer, so you need a working TWRP, and a SD-Card with a good /dload folder.
Go to the TWRP with power on key and at the same time vol + (up).
Now go to Reboot and Bootloader
now you flash the standard recovery.
Like you flashed the TWRP just with the restoration Recovery.img .
All you need is inside of this link provided by Hirs_E_Fruit from his Root Guide.
If you have finaly done flashing the stock recovery you can shutdown your phone and start it with power key + vol+ and vol-
all three at the same time for a solid amout of time idk about 8 sek or so i normaly release the power key after 5 seconds +-.
yea then you should see a blue circle a usb plug in middel of it and some chinese writing.
Hope this will help someone
Have Fun and Good Luck
Gadlion
not worked for me..
I can see blue circle... It will go till 90% but pausing...
in fastboot white screen It
still softbricked...
---------- Post added at 10:02 AM ---------- Previous post was at 09:50 AM ----------
How can I find and install TWRP while my phone is softbricked? Please provide some article
help????????
Gamexland said:
help????????
Click to expand...
Click to collapse
My phone logo is not only turned on DAV-701L
Hi,
I have an SGS6, SM-G920I, I have the phone for about a month with Android 6.0.1 on it, rooted with CF-Auto-Root. About 2 days ago, I decided to unroot the phone because I never used an app that need it, so, I did it from SuperSu app, after that, the phone keeps in bootloop.
I want to flash a stock rom, I already download it and odin 3.11, I dont care about pictures or anything else, but, my problem is that home button isn´t working, so, if I press vol down + home + power, it only recognize vol down + power, and because of that I cant pass the warning screen, neither vol up nor vol down works.
Is there any other way to pass the warning screen in download mode, I can only boot in recovery but non option allows me to flash rom.
Thanks in advance..
Yes. Just need just domaged usb cable. And make like this yourself.
https://www.google.ge/search?q=sams...J8KvRAhXNO1AKHd_OCLYQ_AUIBygB&biw=360&bih=559
---------- Post added at 09:51 PM ---------- Previous post was at 09:48 PM ----------
Also recovery is option, boot into bootloader. It is download mode. Meaby it works for you.
Gonna try this, thanks for answer.
Access Download Mode from Recovery is not working, already try that, but phone keeps stuck in bootloop, thats weird but it happens since I have the phone