(Custom recovery for Doogee F5.
Link below.
"Do not upload this link to other forum."
Instruction:
Nandroid backup needed.
1)must be rooted.
2) Simply flash with #Rashr/ Flashify apk. It is one the play store.
#press the thanks button if I helped.
Linkhilz recovery(Ricky)
https://drive.google.com/file/d/0B6MPq1XwB5pRQUVqMDlQSERhY0k/view?usp=docslist_api
Bug: battery will show 50℅ always.)
#Antutu benchmark for Doogee f5 result: 35000+
Please check your one and let me know. I want to know the difference.
----------------TWRP 3.0.0-------------
Ported from p8000.
#Flash with flashify.
#bugs: u tell me.
#link:
------------
https://drive.google.com/file/d/0B6MPq1XwB5pRaUdqSjh6aU1iMkU/view?usp=docslist_api
# Hit the thanks button if I helped you.
--------dont upload anywhere plz-----
Anybody tried this?
PetaX8 said:
Anybody tried this?
Click to expand...
Click to collapse
Its working. I'm using it.
Any other known bugs than the battery always showing 50%?
AsgardCurse said:
Any other known bugs than the battery always showing 50%?
Click to expand...
Click to collapse
I didn't face anything. Plz tell me if u found. I ported TWRP 3.0.0 as well from p8000. Its also working fine
rosexavier said:
I didn't face anything. Plz tell me if u found. I ported TWRP 3.0.0 as well from p8000. Its also working fine
Click to expand...
Click to collapse
I might do some experimenting tomorrow, but since my Doogee F5 is my "daily driver". The bug with battery showing 50% all the time means it's currently a no-go for me. I need to know when I'm about to run out of juice.
Got a link for the TWRP 3.0.0?
AsgardCurse said:
I might do some experimenting tomorrow, but since my Doogee F5 is my "daily driver". The bug with battery showing 50% all the time means it's currently a no-go for me. I need to know when I'm about to run out of juice.
Got a link for the TWRP 3.0.0?
Click to expand...
Click to collapse
I will upload the link after some final experiment .may be tomorrow. And battery 50℅ shows when ur in recovery mode.
rosexavier said:
I will upload the link after some final experiment .may be tomorrow. And battery 50℅ shows when ur in recovery mode.
Click to expand...
Click to collapse
Ahhhh.. OK, then it's no problem. I'll do some experimenting tomorrow then, when I'm free.
If u can manage try to port cm13. Thanks in advance. May be I can port cm12.1 but can't add the fingerprint feature. That's why I'm not trying. Is there any way to add this on custom ROM?
rosexavier said:
If u can manage try to port cm13. Thanks in advance. May be I can port cm12.1 but can't add the fingerprint feature. That's why I'm not trying. Is there any way to add this on custom ROM?
Click to expand...
Click to collapse
Maybe you should try to extract system fingerprint apps?
You could send a message MushroomLT to make him add a link to his Useful Tools thread.
Recovery works good, I can do a Nandroid backup finally!
Thank you so much
NanobotZ said:
Maybe you should try to extract system fingerprint apps?
You could send a message MushroomLT to make him add a link to his Useful Tools thread.
Recovery works good, I can do a Nandroid backup finally!
Thank you so much
Click to expand...
Click to collapse
You r welcome. Wait for someday I will upload TWRP 3.0.0.
rosexavier said:
If u can manage try to port cm13. Thanks in advance. May be I can port cm12.1 but can't add the fingerprint feature. That's why I'm not trying. Is there any way to add this on custom ROM?
Click to expand...
Click to collapse
Feel free to try to port CM12.1. I know a lot of people that would be happy with it, including myself, even without fingerprint scanner(I never use the feature myself).
which version of twrp is it? because i tried this one that uses 2.8.7 and doesn't properly restore the data partition after a backup. You may take a look at this . Do your backup and restore functions, work properly on your release?
eddie obscurant said:
which version of twrp is it? because i tried this one that uses 2.8.7 and doesn't properly restore the data partition after a backup. You may take a look at this . Do your backup and restore functions, work properly on your release?
Click to expand...
Click to collapse
my one worked fine. 3.0.0. You can use philz recovery which is already uploaded.
NanobotZ said:
Maybe you should try to extract system fingerprint apps?
You could send a message MushroomLT to make him add a link to his Useful Tools thread.
Recovery works good, I can do a Nandroid backup finally!
Thank you so much
Click to expand...
Click to collapse
Hit the thanks button if I helped no need to mention here
rosexavier Hello, please tell us about when to wait TWRP 3.0.0. ?
Agdam_0.75 said:
rosexavier Hello, please tell us about when to wait TWRP 3.0.0. ?
Click to expand...
Click to collapse
Maximum 2 days.
rosexavier said:
Maximum 2 days.
Click to expand...
Click to collapse
Thank you, just super.
Agdam_0.75 said:
Thank you, just super.
Click to expand...
Click to collapse
Link is online... Enjoy.
rosexavier said:
Link is online... Enjoy.
Click to expand...
Click to collapse
In the main menu of TWRP at the top of the screen you can see a "3.0.0-0 by Hanuma50 for ELE P8000", you can change it if you want
Related
Hello people,
I'm trying to Unlock the bootloader of my Nexus S (SHW-M200K) with Nexus Root Toolkit. But the problem is that i need the Modified boot image named "modified_boot_sojuk_4.1.1_JRO03E.img" to do that & I can't download it from Goo.im :crying: . WugFresh is not replying my comments. Please help me to download that image. Thanks.
Here: http://www.mediafire.com/?5o3eqkxa6dcmatp
Put it wherever you installed nexus root toolkit in this directory and folder: \WugFresh Development\data\Modified_Boot
ej8989 said:
Here:
Put it wherever you installed nexus root toolkit in this directory and folder: \WugFresh Development\data\Modified_Boot
Click to expand...
Click to collapse
:victory: It worked itself today somehow. Anyway you were very helpful and i appreciate that. Thank you so much. I'm going to Root my Korean SHW-M200K and flash CyanogenMod 10 Stable with Marmite kernel. It works right? :silly:
m4heshd said:
:victory: It worked itself today somehow. Anyway you were very helpful and i appreciate that. Thank you so much. I'm going to Root my Korean SHW-M200K and flash CyanogenMod 10 Stable with Marmite kernel. It works right? :silly:
Click to expand...
Click to collapse
Yep it works pretty well. Make sure you flash the marmite-cm version. :good:
postoffice infetyv
ej8989 said:
Yep it works pretty well. Make sure you flash the marmite-cm version. :good:
Click to expand...
Click to collapse
That's sweet news . ej8989, can you give me a Link to that kernel and Tell me how to flash the kernel. I know how to flash the ROM but not kernel :silly: . Advices from you is so better. (I'm a noooooob in android. I was a iPhone guy since birth LOL. So help meee :highfive :silly:
m4heshd said:
That's sweet news . ej8989, can you give me a Link to that kernel and Tell me how to flash the kernel. I know how to flash the ROM but not kernel :silly: . Advices from you is so better. (I'm a noooooob in android. I was a iPhone guy since birth LOL. So help meee :highfive :silly:
Click to expand...
Click to collapse
Here: http://d-h.st/hYS
Flashing a kernel is the same as flashing a rom, if you're doing it via custom recovery. :good:
ej8989 said:
Here:
Flashing a kernel is the same as flashing a rom, if you're doing it via custom recovery. :good:
Click to expand...
Click to collapse
Thanks mate. Another question came out. How to identify the variant Correctly? My bootloader says this
Product Name : Herring
HW Version : Rev 11
BootLoader Version : I9020XXKL1
Baseband Version : M200KRKC1
Carrier Info : KTT
Serial No : ......
Lock State - Locked
What is this really?
:victory: Got it to work. It was a Korean version. Did a ton of research to find out what it is. Now i'm running CM10 with you kernel. It's great. Thank you a lot for your help. You people are very kind. Best forum ever. :good: :highfive:
m4heshd said:
:victory: Got it to work. It was a Korean version. Did a ton of research to find out what it is. Now i'm running CM10 with you kernel. It's great. Thank you a lot for your help. You people are very kind. Best forum ever. :good: :highfive:
Click to expand...
Click to collapse
Install NS Tools from playstore to be able to control the kernel's features.
If the kernel's working out great for you, go to this thread: http://forum.xda-developers.com/showpost.php?p=27598370&postcount=1
Then click the "Thanks" button at the lower left corner of the post. :good:
ej8989 said:
Install NS Tools from playstore to be able to control the kernel's features.
If the kernel's working out great for you, go to this thread:
Then click the "Thanks" button at the lower left corner of the post. :good:
Click to expand...
Click to collapse
Hey i got a trouble with Proximity Sensor. It's not working :crying: What to do now?
m4heshd said:
Hey i got a trouble with Proximity Sensor. It's not working :crying: What to do now?
Click to expand...
Click to collapse
In what way are you having troubles with it? During calls?
And what version of CM10 are you using? (For reference)
ej8989 said:
In what way are you having troubles with it? During calls?
And what version of CM10 are you using? (For reference)
Click to expand...
Click to collapse
Yeah, the display does not turn off. Then i downloaded "Proximity sensor finder" and checked, it didn't work either :crying:
m4heshd said:
Yeah, the display does not turn off. Then i downloaded "Proximity sensor finder" and checked, it didn't work either :crying:
Click to expand...
Click to collapse
Unfortunately I can't help you with this.
I also had problems a few months back with another sensor (accelerometer) using CM10 so i switched ROMs and never used stock CM10 again. Let's hope someone with the proper solution might be able to help you :good:
Oh by the way, did you do a clean flash? (Wipe everything before flashing the ROM)
ej8989 said:
Unfortunately I can't help you with this.
I also had problems a few months back with another sensor (accelerometer) using CM10 so i switched ROMs and never used stock CM10 again. Let's hope someone with the proper solution might be able to help you :good:
Oh by the way, did you do a clean flash? (Wipe everything before flashing the ROM)
Click to expand...
Click to collapse
Yeah i wiped everything. Is the problem with ROM? Can you give me a Stock kernel? But the problem is SHW-M200 latest version of stock is 4.1.1 :crying:
m4heshd said:
Yeah i wiped everything. Is the problem with ROM? Can you give me a Stock kernel? But the problem is SHW-M200 latest version of stock is 4.1.1 :crying:
Click to expand...
Click to collapse
I am quite positive it's the ROM. Try this: Flash the ROM again without wiping anything.
ej8989 said:
I am quite positive it's the ROM. Try this: Flash the ROM again without wiping anything.
Click to expand...
Click to collapse
Ok i'll try. Is your Mirage Divide 2.2 ROM and Xens 05/27 Kernel Good? Can i use the Latest DSP Manger with it?
m4heshd said:
Ok i'll try. Is your Mirage Divide 2.2 ROM and Xens 05/27 Kernel Good? Can i use the Latest DSP Manger with it?
Click to expand...
Click to collapse
Yep it's quite good but there's a new version out here: http://forum.xda-developers.com/showthread.php?t=2305485
I'd recommend trying that if your problem still persist after re-flashing CM10.
ej8989 said:
Yep it's quite good but there's a new version out here:
I'd recommend trying that if your problem still persist after re-flashing CM10.
Click to expand...
Click to collapse
heeey, i Noticed that Accelerometer is also not working & just gave a reboot. Everything works fine now :highfive: :victory:
m4heshd said:
heeey, i Noticed that Accelerometer is also not working & just gave a reboot. Everything works fine now :highfive: :victory:
Click to expand...
Click to collapse
Great! Enjoy your device :good:
ej8989 said:
Great! Enjoy your device :good:
Click to expand...
Click to collapse
:good: I gave a thanks to Marmite and also you my friend. Happy to take help from you.
Development? Anyone?
There is one guy I saw posted on a rooting thread that he has developed a ROM for this device but, does not know how to write the updater-script so he is looking for help with that. Perhaps you can help.
You can find that post HERE
BookCase said:
There is one guy I saw posted on a rooting thread that he has developed a ROM for this device but, does not know how to write the updater-script so he is looking for help with that. Perhaps you can help.
You can find that post HERE
Click to expand...
Click to collapse
i wish! i know nothing about development. :crying: i would love to learn. but that doesnt help anyone here. i started a step by step to port CM but got stuck because i couldnt find kernel source. PLEASE someone, we got root, now get us off touchwiz!
logikism said:
i wish! i know nothing about development. :crying: i would love to learn. but that doesnt help anyone here. i started a step by step to port CM but got stuck because i couldnt find kernel source. PLEASE someone, who got root, now get us off touchwiz!
Click to expand...
Click to collapse
I have ported roms in the past to Kindle Fire HD from the Nexus tabs. It's way easier to port than to build a rom from scratch. The tricky part is finding the easiest roms to work with.
Well I can't do either.
Wouldn't we want to get something on here other than stock?
I'll take a port! Lol
logikism said:
Well I can't do either.
Wouldn't we want to get something on here other than stock?
I'll take a port! Lol
Click to expand...
Click to collapse
I'll look around, see what might work.
logikism said:
i wish! i know nothing about development. :crying: i would love to learn. but that doesnt help anyone here. i started a step by step to port CM but got stuck because i couldnt find kernel source. PLEASE someone, who got root, now get us off touchwiz!
Click to expand...
Click to collapse
here you can find the kernel source http://opensource.samsung.com/reception.do
Well I would think that you would need a working custom recovery with external SD card support first. Though the big feature I am looking forward to is a kernel that supports Roehsoft Ram Expander (swap) which while it works fine on my S3 does not work at all on the Tab 4 7.0.
nl3142 said:
Well I would think that you would need a working custom recovery with external SD card support first. Though the big feature I am looking forward to is a kernel that supports Roehsoft Ram Expander (swap) which while it works fine on my S3 does not work at all on the Tab 4 7.0.
Click to expand...
Click to collapse
There is a fully working recovery with SDcard read/write support as mentioned in THIS post.
What I did was downloaded the TWRP 2.8.0.1 .img for t230 then flashed it over the older non-working TWRP using #Rashr. It works for me on SM-T230NU and wipe works. Dalvik/Cache, everything.
CREDITS: agriff
BookCase said:
I'll look around, see what might work.
Click to expand...
Click to collapse
That would be great! Thank you!
Maybe we can get the ball rolling on development!
sub77 said:
here you can find the kernel source http://opensource.samsung.com/reception.do
Click to expand...
Click to collapse
Thank you, I sent request
Sadly I have no porting knowledge atm, but if I could help with testing or something, then just pm me. I'd love to see some cm or PA on my tab 4 7.0
adammo666 said:
Sadly I have no porting knowledge atm, but if I could help with testing or something, then just pm me. I'd love to see some cm or PA on my tab 4 7.0
Click to expand...
Click to collapse
my request to get source was approved but when i click the download link nothing happens.
I personally want to see MAHDI ROM!
logikism said:
my request to get source was approved but when i click the download link nothing happens.
I personally want to see MAHDI ROM!
Click to expand...
Click to collapse
Yep I know nothing happens. But just open it in internet explorer (assuming you used chrome, just like I did).
if you open it in IE new window pops up and gets you to download
logikism said:
Thank you, I sent request
Click to expand...
Click to collapse
adammo666 said:
Sadly I have no porting knowledge atm, but if I could help with testing or something, then just pm me. I'd love to see some cm or PA on my tab 4 7.0
Click to expand...
Click to collapse
neither do i, but ill try and hope for help.
BookCase said:
There is a fully working recovery with SDcard read/write support as mentioned in THIS post.
What I did was downloaded the TWRP 2.8.0.1 .img for t230 then flashed it over the older non-working TWRP using #Rashr. It works for me on SM-T230NU and wipe works. Dalvik/Cache, everything.
CREDITS: agriff
Click to expand...
Click to collapse
i did this and phone stuck on boot screen. now it wont power on or charge. wonderful!
Any help?
BookCase said:
There is a fully working recovery with SDcard read/write support as mentioned in THIS post.
What I did was downloaded the TWRP 2.8.0.1 .img for t230 then flashed it over the older non-working TWRP using #Rashr. It works for me on SM-T230NU and wipe works. Dalvik/Cache, everything.
CREDITS: agriff
Click to expand...
Click to collapse
I already have root (by using vroot and then replacing the chinese app with supersu). Can I just flash TWRP with Rashr or do I need to redo the whole thing from scratch?
logikism said:
i did this and phone stuck on boot screen. now it wont power on or charge. wonderful!
Any help?
Click to expand...
Click to collapse
Hmm, I have no idea. Worked for me in one go. Maybe start over?
nl3142 said:
I already have root (by using vroot and then replacing the chinese app with supersu). Can I just flash TWRP with Rashr or do I need to redo the whole thing from scratch?
Click to expand...
Click to collapse
I resstored the device in odin to the latest factory firmware then flashed the twrp in odin, rebooted directly to recovery and flashed supersu. Rebooted to system, set up all my stuff and flashed the new twrp over the old twrp using rashr. I had to reboot once to set up rashr before i could flash but, it all worked perfectly for me
BookCase said:
Hmm, I have no idea. Worked for me in one go. Maybe start over?
Click to expand...
Click to collapse
cant start over if it wont turn on at all and i believe the battery is dead and it wont charge.
ive read about this issue with other galaxy tabs (2,3) and i need to open up and disconnect battery, i will try this when i get home. i hope it does something after. i just got this thing.
i cant just flash the good twrp instead of one over the other?
logikism said:
cant start over if it wont turn on at all and i believe the battery is dead and it wont charge.
ive read about this issue with other galaxy tabs (2,3) and i need to open up and disconnect battery, i will try this when i get home. i hope it does something after. i just got this thing.
i cant just flash the good twrp instead of one over the other?
Click to expand...
Click to collapse
I don't know. I'm just telling you what I did. I didn't try that way.
Hello I am the illusion dev and have released builds for d851 and ls990 and would like to bring it here for you too. I have builds sitting but will not release without someone telling me it boots first.
Any one want to try it?.
Please dont respond if you dont know how to get out of a bootloop as this is untested for your device but i believe it will work fine.
$droyd$ said:
Hello I am the illusion dev and have released builds for d851 and ls990 and would like to bring it here for you too. I have builds sitting but will not release without someone telling me it boots first.
Any one want to try it?.
Please dont respond if you dont know how to get out of a bootloop as this is untested for your device but i believe it will work fine.
Click to expand...
Click to collapse
My favorite questions to threads as such
Not sure what a bootloop is... but ah what the hell
Will this void my warranty?
Will this work on my version of Motorola?
Your DL is not working
Can you give instruction on how to install recovery
oh, BTW, I would love to give it a whirl. Thank you my good sir.
https://www.androidfilehost.com/?fid=95864024717068268
Please report if it boots or.not.
$droyd$ said:
https://www.androidfilehost.com/?fid=95864024717068268
Please report if it boots or.not.
Click to expand...
Click to collapse
lol, already found it. installing as we speak
You'll have a funny DPI issue with small icons at first.. Just change DPI to the desired density in display settings and reboot.. I just fixed it in source so next build will be fine.
Doesn't seem to like it atm. Going to try another dl.
I will keep an eye on your DL section for update
TonyStark said:
Doesn't seem to like it atm. Going to try another dl.
I will keep an eye on your DL section for update
Click to expand...
Click to collapse
? What .. The ROM won't boot? Clean install?
$droyd$ said:
? What .. The ROM won't boot? Clean install?
Click to expand...
Click to collapse
Yes sir. Hit restart and it goes directly back to TWRP
TonyStark said:
Yes sir. Hit restart and it goes directly back to TWRP
Click to expand...
Click to collapse
That's odd... Others said it booted.. Maybe a bad DL.
Got it to work mate. Realized I had loaded it to my ex sd... Worked from internal:good:
Dear admins, please close this thread, we are going to continue with epic rom for MARKW in this link: https://forum.xda-developers.com/an...nstruction-t3593859/post71974726#post71974726
Sorry for inconveniences....
You mess with the "Tags" check the Tags and edit it according to the redmi 4 prime thread so then it will visible on that page
SAFI_AFRIDI said:
You mess with the "Tags" check the Tags and edit it according to the redmi 4 prime thread so then it will visible on that page
Click to expand...
Click to collapse
Thanks,, I just edited, but this thread does not appears in Redmi 4 Prime subforum......
What can I do?
MrRaines said:
Thanks,, I just edited, but this thread does not appears in Redmi 4 Prime subforum......
What can I do?
Click to expand...
Click to collapse
Just watch this tag. It's the official one and it's working
ISSUE - OTA and Mods crashing at start
Hi, i just flashed the ROM but the "OTA and Mods" section in Settings is not working. If I press on that it just Force close.
Another issue: when updating "Android System Webview", PlayStore gets a Force Close.
Solved cleaning OTA app Datas. Problem with play store update persists.
EDIT: I think it's just me that i have messed up everything: I formatted the user data partition and now i cant even write on internal sdcard. I will clean flash again later after flashing the stock ROM and i will let you know
SAFI_AFRIDI said:
Just watch this tag. It's the official one and it's working
Click to expand...
Click to collapse
Thanks, I just modify... Hope this works...
ZombieTheBest said:
Solved cleaning OTA app Datas. Problem with play store update persists.
EDIT: I think it's just me that i have messed up everything: I formatted the user data partition and now i cant even write on internal sdcard. I will clean flash again later after flashing the stock ROM and i will let you know
Click to expand...
Click to collapse
Perfect. In my case works fine (also works fine in all devices from my testers team).
If someone going to ask you, why should I install your ROM if I have already the EU version ROM? And there are also few bugs in the EU ROM too but any thing different or any new features ?
SAFI_AFRIDI said:
If someone going to ask you, why should I install your ROM if I have already the EU version ROM? And there are also few bugs in the EU ROM too but any thing different or any new features ?
Click to expand...
Click to collapse
You are right, I am asking the difference?
MrRaines said:
Thanks, I just modify... Hope this works...
Click to expand...
Click to collapse
Still not working.
I dont see this thread in the redmi-4-prime list:
https://forum.xda-developers.com/t/redmi-4-prime
FelixDB said:
Still not working.
I dont see this thread in the redmi-4-prime list:
https://forum.xda-developers.com/t/redmi-4-prime
Click to expand...
Click to collapse
Works in my case... Make a full clean install. First use xiaomiflash to be sure that device get a 100% clean install and then install twrp, and my ROM.
Works fine in my case, and update_me show me 103 persons right now using this ROM... I have only 2 cases like yours... And I am sure that is because your devices need a very clean installation of official miui first...
Will try this rom soon
can you give some screenshots ,and what is the SOT whit this rom
MrRaines said:
Works in my case... Make a full clean install. First use xriaomiflash to be sure that device get a 100% clean install and then install twrp, and my ROM.
Works fine in my case, and update_me show me 103 persons right now using this ROM... I have only 2 cases like yours... And I am sure that is because your devices need a very clean installation of official miui first...
Click to expand...
Click to collapse
I was not talking about the room itself, juste to be clear I was talking about the forum thread tags.
Thanks for the rom.
So far everything work fine,no drain battery.
MrRaines said:
Dear admins, please close this thread, we are going to continue with epic rom for MARKW in this link: https://forum.xda-developers.com/an...nstruction-t3593859/post71974726#post71974726
Sorry for inconveniences....
Click to expand...
Click to collapse
Thread closed at op request
Download nougat v240 Stock rom >> https://androidfilehost.com/?fid=673956719939824743
YGPD tools:
https://androidfilehost.com/?fid=746010030569958902
https://androidfilehost.com/?fid=818070582850497767
if you dont know how to flash then go to youtube.com
Edit: OTA v242 available. it has description about fixed modem issue.
Download OTA >> CLICK HERE
Hey is it better and more stable than V235 and doesthis have the same Malware problem like V236-7-8-9? ?
Assuming that you tested this rom or used this,does it have apps auto installing and causing lag.?
Iamav_ said:
Hey is it better and more stable than V235 and doesthis have the same Malware problem like V236-7-8-9? ?
Assuming that you tested this rom or used this,does it have apps auto installing and causing lag.?
Click to expand...
Click to collapse
there is no malware problem
it is good as compare to v235
no lag for me
tcpcd said:
there is no malware problem
it is good as compare to v235
no lag for me
Click to expand...
Click to collapse
Are you aware that apps kept reinstalling in previous updates,im on v235 after 235 there are apps automatically
Installing,are you 100% sure about no auto-app installation? And this is official ota ? Or not? If you are a developer then can you make a twrp flashable version like someone made on coolpad forums..? Plz
Iamav_ said:
Are you aware that apps kept reinstalling in previous updates,im on v235 after 235 there are apps automatically
Installing,are you 100% sure about no auto-app installation? And this is official ota ? Or not? If you are a developer then can you make a twrp flashable version like someone made on coolpad forums..? Plz
Click to expand...
Click to collapse
im aware of installing malware on v235, but in v240 i didnt get any warning related to malware
im not developer
I know im asking too much can you post a YouTube video on testing the rom,like the nougat rom im using has a bugs like it lags when there are more notifications,does v240 hangs? During notifications ? And can i get stock recovery? So i'll flash it with flashify ? and update to this... If its good? What do you say?
Iamav_ said:
I know im asking too much can you post a YouTube video on testing the rom,like the nougat rom im using has a bugs like it lags when there are more notifications,does v240 hangs? During notifications ? And can i get stock recovery? So i'll flash it with flashify and update to this... If its good? What do you say?
Click to expand...
Click to collapse
no
test yourself
you are on stockrom backup stock recovery using flashify
tcpcd said:
no
test yourself
you are on stockrom backup stock recovery using flashify
Click to expand...
Click to collapse
Actually i rooted the rom,and flashed twrp,and didn't took a backup of stock recovery so if you can help it will be great help.
Iamav_ said:
Actually i rooted the rom,and flashed twrp,and didn't took a backup of stock recovery so if you can help it will be great help.
Click to expand...
Click to collapse
i guess you didnt search on youtube
https://www.youtube.com/watch?v=zhjDVyFOorc
you dont need stock recovery to flash rom
just download ygdp tool, reboot your phone into bootloader (find option in twrp)
tcpcd said:
i guess you didnt search on youtube
https://www.youtube.com/watch?v=zhjDVyFOorc
you dont need stock recovery to flash rom
just download ygdp tool, reboot your phone into bootloader (find option in twrp)
Click to expand...
Click to collapse
I obviously know that,how do you think i upgraded from MM to Nougat.
I just want to get the update through ota,so my data isn't lost(I don't wanna do all backup restore and all),we can with stock recovery installed, explained by tony stark (coolpad forums) so if you give me stock recovery then please help me brother,if you can't Np
Iamav_ said:
I obviously know that,how do you think i upgraded from MM to Nougat.
I just want to get the update through ota,so my data isn't lost(I don't wanna do all backup restore and all),we can with stock recovery installed, explained by tony stark (coolpad forums) so if you give me stock recovery then please help me brother,if you can't Np
Click to expand...
Click to collapse
https://androidfilehost.com/?fid=673956719939825075
tcpcd said:
https://androidfilehost.com/?fid=673956719939825075
Click to expand...
Click to collapse
Didn't help.flashed stock v238 now im not getting V240? Even on the test server how can i get it,i downloaded the rom you gave but YGPD Doesn't accept the rom,i says something about userssettings.xml and Doesn't load,how can i flash V240 that you gave me ..?
Iamav_ said:
Didn't help.flashed stock v238 now im not getting V240? Even on the test server how can i get it,i downloaded the rom you gave but YGPD Doesn't accept the rom,i says something about userssettings.xml and Doesn't load,how can i flash V240 that you gave me ..?
Click to expand...
Click to collapse
Sorry bro i cant help u on getting ota.
better you should flash rom
From both ygdp, only works one, i dont know which, so download both ygdp and check
tcpcd said:
Sorry bro i cant help u on getting ota.
better you should flash rom
From both ygdp, only works one, i dont know which, so download both ygdp and check
Click to expand...
Click to collapse
hey Thanks It Helped!
Now do you know any method through which i can get root Access and Get OTA also..
Iamav_ said:
hey Thanks It Helped!
Now do you know any method through which i can get root Access and Get OTA also..
Click to expand...
Click to collapse
you should learn how to google.....
http://www.coolpadforums.com/forum.php?mod=viewthread&tid=28598
pls next time before posting anything, do some research on google.
tcpcd said:
you should learn how to google.....
http://www.coolpadforums.com/forum.php?mod=viewthread&tid=28598
pls next time before posting anything, do some research on google.
Click to expand...
Click to collapse
lol.
i know how to google..
and I found this thread,but ihave issues with drivers(which i do googled but Didn't work)
+ the forum is taking too long to load+i cannot even get a CSS of the Site(probably Coolpad messed it up like there mobiles)..
Bug
No problems in os but Battery drains very quickly at v242... there is any other stock rom?
After update to v242... screen colour saturation has decreased alot like colour washed out....i can clearly identify it cz I was in mmv025, charging time has also increased, battery is draining fast...pls fix it in next update...
Coolpad note 5 update OTA with Android 8.0 with oreo send me I am waiting for Android 8
V242 not downloading
It's seem likes stack
Anyone help me