This thread to collaborate all efforts towards porting kernel 3.x on to the Galaxy SL. If any developers wish to help then please let me know and I will add you to the repo on Github.
Do not ask for an ETA. If you do or try to cleverly disguise it by asking how long it takes on average or anything along these lines, your post will be reported to a moderator.
Changelog
https://github.com/hillbeast/android_kernel_samsung_latona/commits/ics-latona-3.0
I chose the Github commit system to be the changelog as there are so many things going on at once it would be impossible to keep up with, and I cannot be assed explaining it. If you don't understand then ask, but please don't ask EVERYTHING. Most of the answers will be 'It just does'.
Discussion Thread
This thread is for DEVELOPMENT ONLY. I know you all wish to praise the developers and give your support, but it really clutters things up when there is like 20 posts of 'thanks' and then one post of an update in progress for the project. So let's keep this thread for development, discussion on fixing bugs and such and you can discuss it all over at this thread kindly made over here:
http://forum.xda-developers.com/showthread.php?t=1712224
Source Code
Source: https://github.com/hillbeast/android_kernel_samsung_latona
Members
hillbeast
dhiru1602
crackerizer
If anyone else who has a keen knowledge of the Linux kernel can help, then let me know. Fork the repository, make some changes and send me a pull request. If you don't know how to do that or can't figure out how to do it then you won't be able to help me.
Why Do We Need Kernel 3.
Easier updating the kernel to add security and performance boosts from mainline Linux kernels
More support for new versions of Android
Android 4.0 was built upon Linux Kernel 3.0.x and therefore expects kernel 3.0s APIs
Faster, more secure system
NO SAMSUNG MORONIC CODE
Because it's just better
Please let me know if you are interested (able to) in helping this cause. Please don't put your hand up if you can't dedicate your phone to this. This will result in your phone being out of action quite a lot while we are testing, and if you need your phone 24/7 then you're going to need to keep flashing back. You will also NEED ODIN. Flashing from CWM is not an option.
Status
UART dump:
Code:
Uncompressing Linux... done, booting the kernel.
<6>Initializing cgroup subsys cpu
<5>Linux version 3.0.8+ ([email protected]) (gcc version 4.4.3 (GCC) ) #Test PREEMPT Mon Sep 24 11:09:01 NZST 2012
CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7f
CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine: LGE Hub board
<6>Reserving 4194304 bytes SDRAM for VRAM
Memory policy: ECC disabled, Data cache writeback
<6>OMAP3630 ES1.2 (l2cache iva sgx neon isp 192mhz_clk )
<6>SRAM: Mapped pa 0x40208000 to va 0xfe408000 size: 0x7000
<7>On node 0 totalpages: 62976
<7>free_area_init_node: node 0, pgdat c06cbb8c, node_mem_map c083f000
<7> Normal zone: 512 pages used for memmap
<7> Normal zone: 0 pages reserved
<7> Normal zone: 62464 pages, LIFO batch:15
<6>Clocking rate (Crystal/Core/MPU): 26.0/400/800 MHz
<6>Reprogramming SDRC clock to 400000000 Hz
<7>pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
<7>pcpu-alloc: [0] 0
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 62464
<5>Kernel command line: console=ttyS2,115200 videoout=omap_vout omap_vout.video1_numbuffers=6 omap_vout.vid1_static_vrfb_alloc=y omapfb.vram="0:4M" version=Sbl(1.0.0) 2011-03-21 10:46:47 androidboot.mode=jig bootmode=0 androidboot.current_panel=0
<6>PID hash table entries: 1024 (order: 0, 4096 bytes)
<6>Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
<6>Memory: 246MB = 246MB total
<5>Memory: 238620k/238620k available, 23524k reserved, 0K highmem
<5>Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
vmalloc : 0xd0800000 - 0xf8000000 ( 632 MB)
lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.init : 0xc0008000 - 0xc003d000 ( 212 kB)
.text : 0xc003d000 - 0xc0674d5c (6368 kB)
.data : 0xc0676000 - 0xc06cc500 ( 346 kB)
.bss : 0xc06cc524 - 0xc083ed88 (1483 kB)
<6>Preemptible hierarchical RCU implementation.
<6>NR_IRQS:410
<6>IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
<6>Total of 96 interrupts on 1 active controller
<6>OMAP clockevent source: GPTIMER1 at 32768 Hz
<6>sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
<6>Console: colour dummy device 80x30
<6>Calibrating delay loop... <c>798.24 BogoMIPS (lpj=3117056)
<6>pid_max: default: 32768 minimum: 301
<6>Mount-cache hash table entries: 512
<6>Initializing cgroup subsys debug
<6>Initializing cgroup subsys cpuacct
<6>Initializing cgroup subsys freezer
<6>CPU: Testing write buffer coherency: ok
<4>omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_core
<4>omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_per
<4>omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_wkup
<4>omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for usbhs_ohci
<4>omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for usbhs_ehci
<4>omap_hwmod: gpt12_fck: missing clockdomain for gpt12_fck.
What needs to be done
Everything
mach code (board-latona)
plat code
drivers
How To Build
git clone git://github.com/hillbeast/android_kernel_samsung_latona -b android-latona-3.0
cd android_kernel_latona
make latona_defconfig ARCH=arm
./build.sh config
./build.sh
Things to be aware of
I feel these things should be mentioned as they are important changes that may disrupt peoples user experience on the phone.
Odin will not work anymore for flashing ROMs. It's as simple as that. We will no longer be using STL/BML/TFSR for interfacing with the NAND, and that is what ODIN expects to be working with: partitions in STL format. We simply will not support STL when this kernel is complete as it is closed source and will not function on kernel 3.x. We will be moving over to MTD which is mainline, and regularly gets updates to improve performance, reliability and in general to make it better.
Kernels will however be flashable from ODIN. This WILL NOT change. Kernels, modems and bootloaders will all still work from Odin. Data, system and cache will not.
I know this will annoy a few people, as it will disrupt me too as a developer and a Windows user, it's nice to be able to flash a ROM this way, but we're going to have to move towards distributing ROMs in update.zips only.
There will be no support for Samsung Froyo/Gingerbread ROMs in kernel 3.x. The reasoning behind this is because Samsung ROMs want Samsung drivers and we won't be using any of them. We will be aiming to support CM7 and CM9, or generally any AOSP ROM, but not Samsungs proprietary ROM. You may think 'well why not make the drivers work for both', but the problem is not with making the drivers work, the problem is with the fact that a lot of these drivers were written for a kernel almost 10 major versions out of date by now, and will not function on the new kernels APIs. If we try to make them work, it will make the kernel unstable and it's going to degrade the experience for the end user. As well as that, we don't know how half these drivers actually work because they are either coded so badly it's impossible to make heads or tails of it, or it's closed source and we can't find sources for it.
Kernel 3.x will not allow us to work magic with the phone. Having a newer kernel won't allow us to make the CPU itself faster, we can't give it more RAM (or find more RAM in there). We won't be able to unlock more performance from x part. This is not a magical rebirth of the phone, this is just a major fix up of all the current issues we face with AOSP based ROMs on the phone. It will most likely make the phone faster, but we can't magically make it into a dual core or something like that. It just isn't possible.
Did you see it? Could have been anyone. Could you spot him in a crowd? Probably not. It's just a reserved post.
And I think this should do it for reserved posts. You may now post.
i will be glad to help
sachin sharma said:
u using lenaro toolchain? wow
that will make the kernel go zoooom
Click to expand...
Click to collapse
For the Galaxy 3 I use Codesourcery 4.5.2 as Linaro doesn't work on it. I will see what works best for this phone. I have to learn the whole device.
Sent from my GT-I9100 using XDA
hillbeast said:
For the Galaxy 3 I use Codesourcery 4.5.2 as Linaro doesn't work on it. I will see what works best for this phone. I have to learn the whole device.
Sent from my GT-I9100 using XDA
Click to expand...
Click to collapse
m connfused??????
in ur build.sh u have used
TOOLCHAIN=/usr/linaro/bin/arm-linux-gnueabi-?????
y is this lenaro toolchain for?
r u going to edit it n use sum other toolchain???
---------- Post added at 12:18 PM ---------- Previous post was at 12:03 PM ----------
hillbeast said:
For the Galaxy 3 I use Codesourcery 4.5.2 as Linaro doesn't work on it. I will see what works best for this phone. I have to learn the whole device.
Sent from my GT-I9100 using XDA
Click to expand...
Click to collapse
i m going to fork ur repostory!!!
downloading vmware now as i dont have linux environment due to hard disk issues
sachin sharma said:
m connfused??????
in ur build.sh u have used
TOOLCHAIN=/usr/linaro/bin/arm-linux-gnueabi-?????
y is this lenaro toolchain for?
r u going to edit it n use sum other toolchain???
---------- Post added at 12:18 PM ---------- Previous post was at 12:03 PM ----------
i m going to fork ur repostory!!!
downloading vmware now as i dont have linux environment due to hard disk issues
Click to expand...
Click to collapse
Oh perhaps I am using Linaro. I was at work when I wrote that so I wasn't really thinking.
I have a build server that I use for my development, but I used to use VMware for my Linux devving so that will work fine for you too.
Also update on the USB issue I was having, it must have been the condensation because it's working fine now after leaving it to dry out while I was at work. I'm flashing Gingerbread on it so I have a stable platform while I learn the device.
Right so first priority is to get UART output. My current UART cable with a 612K resistor (I think it was 612K) doesn't give me any output. I'd say that is the wrong resistor for this device, so I need to find out which one it is. However the cable does JIG the phone to start up.
hillbeast said:
Right so first priority is to get UART output. My current UART cable with a 612K resistor (I think it was 612K) doesn't give me any output. I'd say that is the wrong resistor for this device, so I need to find out which one it is. However the cable does JIG the phone to start up.
Click to expand...
Click to collapse
Update to this: got this output:
Code:
AST_POWERON
BOOTING COMPLETED
That's the modem speaking to me over UART. Gotta change the UART mode to PDA instead of MODEM. Will do that once I root the phone.
hillbeast said:
Update to this: got this output:
Code:
AST_POWERON
BOOTING COMPLETED
That's the modem speaking to me over UART. Gotta change the UART mode to PDA instead of MODEM. Will do that once I root the phone.
Click to expand...
Click to collapse
Another update, I did this in adb shell:
Code:
echo PDA > /sys/devices/platform/switch-sio/uart_sel
Then rebooted the phone with my UART cable attached and now I get this:
Code:
Uncompressing Linux... done, booting the kernel.
So it's giving me output up until the kernel boots which told me the console attribute in the cmdline isn't set. I looked and that confirmed it that it wasn't. I will get the sourcecode for a kernel and compile it with the console attribute.
So yes, this phone will do UART. I just have to do it a bit weirdly.
I made a discussion thread here, post only developement related things in here, and everything else goes there
loneagl said:
@hillbeast
Sorry to interrupt dude
Linux is Greek to many of us......
so does this mean kernel 3.x is possible???
Sent from my GT-I9003 using XDA
Click to expand...
Click to collapse
It means I will be able to debug the kernel while I am developing it.
Skander1998 said:
I made a discussion thread here, post only developement related things in here, and everything else goes there
Click to expand...
Click to collapse
Thanks. I will subscribe to it.
Sent from my GT-I9100 using XDA
Right so I just had to figure out how to compile kernels on this phone. It's completely different to doing it on the Galaxy 3. On the G3, we just use zImages, whereas here it's using boot.imgs which is quite different. I've updated my build.sh to account for this. I'm still not actually working on Kernel 3.x. I'm still learning the device and getting it set up so I can develop on it.
hillbeast said:
Right so I just had to figure out how to compile kernels on this phone. It's completely different to doing it on the Galaxy 3. On the G3, we just use zImages, whereas here it's using boot.imgs which is quite different. I've updated my build.sh to account for this. I'm still not actually working on Kernel 3.x. I'm still learning the device and getting it set up so I can develop on it.
Click to expand...
Click to collapse
Maybe this help
hillbeast said:
Right so I just had to figure out how to compile kernels on this phone. It's completely different to doing it on the Galaxy 3. On the G3, we just use zImages, whereas here it's using boot.imgs which is quite different. I've updated my build.sh to account for this. I'm still not actually working on Kernel 3.x. I'm still learning the device and getting it set up so I can develop on it.
Click to expand...
Click to collapse
Yup.... the boot.img contains both the zImage and ramdisk ...
Sent from my GT-I9003 using XDA
TheFrankenstain said:
Maybe this help
Click to expand...
Click to collapse
Already figured it out, but thanks anyway.
arindammanidas said:
Yup.... the boot.img contains both the zImage and ramdisk ...
Sent from my GT-I9003 using XDA
Click to expand...
Click to collapse
zImages can contain ramdisks too. Been using it like that on the G3 for long time. We used LZMA compression and managed to cram a hell of a lot into the boot partition.
hillbeast said:
Right so I just had to figure out how to compile kernels on this phone. It's completely different to doing it on the Galaxy 3. On the G3, we just use zImages, whereas here it's using boot.imgs which is quite different. I've updated my build.sh to account for this. I'm still not actually working on Kernel 3.x. I'm still learning the device and getting it set up so I can develop on it.
Click to expand...
Click to collapse
i can make boot.img for u
if u want
Original thread by hashcode for RAZR http://forum.xda-developers.com/showthread.php?t=2181971
Here is a copy paste.
Hashcode said:
** WARNING: THIS THREAD SHOULD BE FOR KERNEL DEVELOPERS OR ROM DEVS.
Users please post questions in your ROM's support threads. **
** DEVS: If you choose to use a kexec kernel in your ROM add a "KERNEL CREDIT" for the first 4 people in the "WHO HAS WORKED ON THIS?" section below. This has been spectacular development and credit is due. **
TESTING ROMS FOR KEXEC KERNEL PROGRESS:
Droid RAZR:
[2013-03-12] cm-10.1 on v3.0.8 JB kernel:link removed for safety
GSM RAZR:
cm-10.1 on v3.0.8: link removed for safety
MAPPHONE 3.0.x KEXEC KERNEL:
For use on Motorola devices; Droid RAZR, GSM RAZR, RAZR MAXX, Bionic and Droid 4. (1 GB OMAP4 devices for now, 512MB support coming).
WHAT IS A KERNEL?
Also from Wikipedia: http://en.wikipedia.org/wiki/Kernel_%28computing%29
Summary: If you had to choose 1 binary file which connects the hardware components of your device to the OS layer whether it be Android or some other software, it would be the kernel.
WHAT IS KEXEC?
The best description is found here on Wikipedia: http://en.wikipedia.org/wiki/Kexec
Summary: kexec is a process for hot reloading a new kernel while a device is running.
WHERE DID THIS KERNEL COME FROM?
Initially the source came from Motorola. All GPL components of Android are posted on Sourceforge.net for Motorola devices:
http://sourceforge.net/motorola/
After that it's been worked on (see below) to support kexec function and work for our needs.
WHO HAS WORKED ON THIS?
Several people played a large role in making this happen:
Kholk & [MBM]: Initial development work done on the RAZR/Bionic under Gingerbread to setup kexec modules + booting kexec kernel (no 2nd cpu)
jonpry: Ported and improved Kholk/MBM's work for use on the Droid 3. Brought up 2nd CPU, fixes for audio and more.
Hashcode (myself): On going development of this kernel for flawless function on our devices.
A full kernel source history on github starting with omapzoom sources and migrating Motorola source in commit by commit
Fixes for clocks, local timers, GPMC setup, race conditions in irq's due to kexec and more.
On going development towards full support for current Android / Ubuntu Phone OS requirements (including 512MB and Droid 3 support).
Other's have also contributed code (and hopefully more will as well): kfazz(D4), jarveson(D3) and more.
WHERE IS THE SOURCE?
KERNEL SOURCES (ALL DEVICES):
https://github.com/STS-Dev-Team/kernel_mapphone_kexec
BRANCH: stock-ics-kexec
DESCRIPTION: This is a perfect copy of the ICS kernel running as kexec. For use with stock-based ROM's etc.
STATUS: Ready for use
BRANCH: jb-mr1
DESCRIPTION: Ongoing kernel branch for support of newer Android OS (Jellybean MR1 currently).
STATUS: Work-in-progress. Heavy development
KEXEC KERNEL-MODULE SOURCES FOR ICS/JB BASED DEVICES:
https://github.com/STS-Dev-Team/kernel_kexec_modules/tree/3.0.8-ics-spyder
Branch: 3.0.8-ics-spyder
Defconfig: mapphone_kexec_defconfig
KEXEC KERNEL-MODULE SOURCES FOR GB BASED DEVICES (Droid 3):
https://github.com/STS-Dev-Team/kernel_kexec_modules/tree/2.6.35-solana/
Branch: 2.6.35-solana
Defconfig: mapphone_defconfig
HOW TO KEXEC A DEVICE
1. Download kexec kernel modules + kexec binary for your base kernel version
(Most devices found here):
https://github.com/STS-Dev-Team/android_device_motorola_omap4-kexec-common/tree/cm-10.1/kexec
(Droid 3 Users need GB based modules here):
https://github.com/STS-Dev-Team/android_device_motorola_solana/tree/jb-mr1/kexec
2. Download the devtree for your device:
Droid RAZR: https://github.com/STS-Dev-Team/android_device_motorola_spyder/tree/jb-mr1/kexec
GSM RAZR: https://github.com/STS-Dev-Team/android_device_motorola_umts_spyder/tree/jb-mr1/kexec
Bionic: https://github.com/STS-Dev-Team/android_device_motorola_targa/tree/jb-mr1/kexec
Droid 4: https://github.com/STS-Dev-Team/android_device_motorola_maserati/tree/jb-mr1/kexec
Droid 3: Droid 4: https://github.com/STS-Dev-Team/android_device_motorola_solana/tree/jb-mr1/kexec
3. Need a kexec kernel binary from the above sources: renamed the zImage as "kernel".
4. Need a .gz cpio ramdisk named: ramdisk.img
**RAMDISK needs to take care of mounting related filesystems for your ROM.
Ususally Safestrap/BMM handles this in some way for rom-slots.
For easy kexec tests you can build a CWM ramdisk and use that.
Now boot up into a safe kexec point on the device be it BMM or Safestrap where you can use adb.
5. Move all of the above files onto the rootfs
6. Execute the following as a script:
Code:
# run this from a "safe" boot point (safestrap / bootmanager) where no mounts are active
cd /
chmod 755 /kexec
# you will lose USB function here till the new kernel boots -- hence the script
insmod /uart.ko
insmod /arm_kexec.ko
insmod /kexec.ko
/kexec -l /kernel --devtree=/devtree --ramdisk=/ramdisk.img
sleep 1
/kexec -e
CURRENT DEVELOPMENT ROAD MAP
Merge up to Linux Mainline v3.0.21 + Google kernel/common commits (where applicable)
Cherry-pick from TI's kernel tag 4AI.1.5 to 4.AI.1.6
Merge up to Linux Mainline v3.0.31 + Google kernel/common commits (where applicable)
Cherry-pick from TI's kernel tag 4AI.1.6 to 4.AI.1.7
Also pick up any p-android-omap-3.0 and p-android-omap-3.0-dev commits where needed
Merge up to current Linux Mainline + Google kernel/common commits (where applicable)
Click to expand...
Click to collapse
Currently, there is one kexec based rom for Atrix 2 CM10.1 by wanggjghost here.
Source Code for Atrix 2 http://sourceforge.net/projects/atrix2.motorola/files/
and http://sourceforge.net/projects/me865.motorola/files/ME865/
Other source code that can help you wanggjghost's github https://github.com/SunRain/android_device_motorola_edison
ISSUES TO BE SOLVED
The current major issue regarding Kexec is that some devices get a black screen once kexec is executed.
This thread to discuss and develop a solution for it. And once that is solved, to discuss custom kernels.
Here are a few things that might help.
kmsg when kexec boot up failed: http://www.mediafire.com/download.php?95raby988dvch74 (just open it with a text editor. It is corrupt but you can make out quite a lot.)
The dmesg for stock ics: http://www.mediafire.com/view/?z4pibf2at3u4i7e (Going through this will give you better idea as how things should be.)
And the panic msg after I soft reset it after a black screen: http://www.mediafire.com/view/?z4pibf2at3u4i7e (When I get a black sscreen, I hold vol up+ vol down+ pow for about 10 secs. that soft resets my phone and a panic msg is generated which I retrieve.)
From the kmsg, here is something interesting that appears to be the cause. (Note: I have made some edits to make it readable, not completely readable though.)
Code:
[ 2.745880,0] cannot apply mgr(lcd) on inactive device
[ 2.745971, ] omapfb omapfb: failed to apply dispc config
[ ².·46893¬0] cannot apply mgr(tv) on inactive device
[ 2.746154,0] omapfb omapfb: failed to apply dispc config
[ 2.746307,0] cannot aplly mgr(lcd2) on inactive(device
[ 2.7463¶8,0\ omapfb omapfb: failed to apply dispc config
[ 2.746520,0] DSI: dsi_fc_kmd = 0, dói_vc_video 9 1
[ 2®746582,0] DT: x_res=540 y_res=960 phy_w_mm=54 phy_h_mm=95
[ 2.·46673,0](ÄT: hfp=0 hsw=² hbp-2 vnp=0 ösw=1 vbp=1
[ 2®746795,0] DTº cìk_lanå=1 clk_pos90 d1_line=2 d1_pos=0 d2_lane=3 d2_pos=0
[ 2.746948,0](DT: d3_lane=0 d3_pos=0 d4_lane=0 d4_pos=0
[ ².747009,0] DT: panel_id= x1a000² type= 0
[ 2.747102,0] DT: regn=13 regm=230 regm3=6 regm4=6 lp_clk_div=9 lck_div=1 pck_div=4
[ 2.747222,0] DT: te_support=1, te_type=0
[ 2.747283,0] DT: number of power suppljes-±
[ 2.747436,0] DT: Supply #°, beg name=sw4, gpin=96,*gpio_en_val=1
[ 2.(43¸57,0] mmc2: card claims to support voltages below the defined range. These will be ignored.
[ 2.860656,0] omapdss DSI error: Failed to receive BTA
[ *2.861816,0] mmc2: quduing unknïwn CIS tupìe 0x99 (3 jytms)*[( 2.862792¬0] mmc2: .%w high speeä RDIG kard at address 0001
[ 2.962280,0] omapdss DSI error: Failed to receive BTA
[ 3.063781,0] omapdss DSI error: Failed to receive BTA
[ "3®091705,0] mmc0: host doås(not cupport reiding re!d-onlù switch. assuminç write-enable.
[ 3.0)5336,0] míc0: new hkgh speed SDHC cabd at address aaaa
[ 3.896496,0] mmcblk0:(mmc0:aaaa SU16G 14.8 GiB
[ 3®101·76,0] mmcblk : p1
[" 3.165374,0] omapdss DS (error: Fa)led to receire BTA
[ 3.26693',0] omapnss DSI error: Failed to rekeivm(BTA*[ ¨ 3®368538,0] kmapdss DS) ebror: Failed to receivm BTA
[ 3.<78062¬0Y omapdss DSI error: Failed to receive BTI
[ "3.571624,0] omapdss DSI error:(Failed to receive BTA
[ 3*673217,0](oma0dss DSI ezror: Failed to receive BTA
[ ³.774749,0] omapdss DSI error: Fâile` to rekeive BTA
[ 3.¸76312,0\ om!pdss SI erro2: Failed to receive BTA
[ 3.876556,0] check_mapxjone_panel_present: Faineä to recmive BTA ACK foz 10 times.
[ 3.877014,0] marphone_xanel_power_on:Paneì és not attached nò failed ðo send BTA.*[ 3.8772¸8,0] omapfb omapfb: Fáile$ to enable display 'lcd'
[ 3.¸77746,0] kmapfb omapfb: failed to inkpialize default display
[ 3.¸79821,0] omarfb omapfb: failed |o se4up omapf"Š[ 3.¸80279,0] omapfb: probe of omapfb fa)led with error -22
[ 3.882019,0] regulator_init_complete: vwlan1: disibling
[ " 3.882873,0] begulat/r_inét_complete: vrfref: dhsabling
[ 3.883544,0] renulator_init_coíphete: vbf²: disabling
Z 3.8:7145,0] regulator_check_voltage: v5sb: operation not allowed
[ 3.:91937,0] lm3532_bl_work: Display backlight(disable)
The issue appers to be regarding omapfb (frame buffers). might be an issue with the command line. wang's kernel uses
Code:
root=/dev/ram0 rw [email protected] console=null vram=10300K omapfb.vram=0:8256K,1:4K,2:2040K init=/init ip=off mmcparts=mmcblk1:p7(pds),p15(boot),p16(recovery),p17(cdrom),p18(misc),p19(cid),p20(kpanic),p21(system),p22(cache),p23(preinstall),p24(webtop),p25(userdata),p26(emstorage) mot_sst=1 androidboot.bootloader=0x0A74
However, using
Code:
root=/dev/ram0 rw [email protected] console=ttyO2,115200n8 init=/init ip=off mmcparts=mmcblk1:p7(pds),p15(boot),p16(recovery),p17(cdrom),p18(misc),p19(cid),p20(kpanic),p21(system),p22(cache),p23(preinstall),p24(webtop),p25(userdata) mot_sst=1 androidboot.bootloader=0x0A73
might solve.
Also, the following keeps repeating
Code:
PVR_K:(error):BridgedDispatchKM: Initialisation failed. Driver unusable
but PVR_K is related to display (I guess) and that again takes us back to omapfb.
Put in your thoughts as well but try to keep the thread clean.
Here's another panic log: http://pastebin.com/TdU31ERU
Regarding the "PVR_K: (Error): BridgedDispatchKM: Initialisation failed. Driver unusable." error that Ravi pointed out... and for my curiosity..
Can someone who has the kexec build running run these from a command line, please? (and post the output here):
Code:
adb shell
cat /proc/pvr/version
strings vendor/lib/egl/libGLESv2_POWERVR_SGX540_120.so | grep build
$ adb shell
* daemon not running. starting it now on port 5038 *
* daemon started successfully *
error: device not found
$ cat /proc/pvr/version
Version SGX_DDK_Android sgxddk 19 [email protected] (release) omap4430_android
System Version String: SGX revision = 1.2.0
_POWERVR_SGX540_120.so | grep build <
OpenGL ES GLSL ES 1.00 build [email protected]
OpenGL ES 2.0 build [email protected]
$
Sent from my MB865 using xda app-developers app
---------- Post added at 04:41 PM ---------- Previous post was at 04:35 PM ----------
Is that what u need?
Sent from my MB865 using xda app-developers app
jaymccoubrey said:
$ adb shell
* daemon not running. starting it now on port 5038 *
* daemon started successfully *
error: device not found
$ cat /proc/pvr/version
Version SGX_DDK_Android sgxddk 19 [email protected] (release) omap4430_android
System Version String: SGX revision = 1.2.0
_POWERVR_SGX540_120.so | grep build <
OpenGL ES GLSL ES 1.00 build [email protected]
OpenGL ES 2.0 build [email protected]
$
Sent from my MB865 using xda app-developers app
---------- Post added at 04:41 PM ---------- Previous post was at 04:35 PM ----------
Is that what u need?
Sent from my MB865 using xda app-developers app
Click to expand...
Click to collapse
Yup, thanks.. I was just chasing wild geese again..
[Edited to reduce clutter, etc.. ]
So, yea, wild goose chase...
--------------------------
Also, @Ravi - this is my current device BoardConfig:
Code:
# inherit from common
-include device/motorola/omap4-kexec-common/BoardConfigCommon.mk
# inherit from the proprietary version
-include vendor/motorola/edison/BoardConfigVendor.mk
# Processor
TARGET_BOOTLOADER_BOARD_NAME := edison
# Kernel
BOARD_KERNEL_CMDLINE := root=/dev/ram0 rw [email protected] console=null vram=10300K omapfb.vram=0:8256K,1:4K,2:2040K init=/init ip=off mmcparts=mmcblk1:p7(pds),p15(boot),p16(recovery),p17(cdrom),p18(misc),p19(cid),p20(kpanic),p21(system),p22(cache),p23(preinstall),p24(webtop),p25(userdata),p26(emstorage) mot_sst=1 androidboot.bootloader=0x0A72
BOARD_KERNEL_BASE := 0x80000000
BOARD_PAGE_SIZE := 0x4096
# Kernel Build
TARGET_KERNEL_SOURCE := kernel/motorola/omap4-kexec-common
TARGET_KERNEL_CONFIG := mapphone_1GB_defconfig
And I have the same BOARD_KERNEL_CMDLINE in the mapphone_1GB_defconfig.. but pretty sure I have other issues as well. Here's a kmsg from an attempt at booting mine: http://pastebin.com/VZzg0ALD - containing my favorite debug message ever: Bad BP 0[ID: 0x0], Is this a Phone ??
One more thing, take a look at the atags with a hex editor...
Im kimda limited on what i no how to do.. Tell me what to do and how ill do it.
Sent from my MB865 using xda app-developers app
---------- Post added at 06:32 PM ---------- Previous post was at 06:26 PM ----------
I download a hex Editor. Where do i look?
Sent from my MB865 using xda app-developers app
jaymccoubrey said:
Im kimda limited on what i no how to do.. Tell me what to do and how ill do it.
Sent from my MB865 using xda app-developers app
---------- Post added at 06:32 PM ---------- Previous post was at 06:26 PM ----------
I download a hex Editor. Where do i look?
Sent from my MB865 using xda app-developers app
Click to expand...
Click to collapse
Lol.. My ramblings weren't directed at you specifically.. It's just for general (possibly cluttered and useless) info.. And that last note was for Ravi actually - on the topic of board kernel command lines..
Sent from my MB865 using xda app-developers app
So do u need anything else. Ill help cause ur roms kick ass
Sent from my MB865 using xda app-developers app
jaymccoubrey said:
So do u need anything else. Ill help cause ur roms kick ass
Sent from my MB865 using xda app-developers app
Click to expand...
Click to collapse
Thanks.. But I'll post if I need/want to see something else from kexec running..
And this kexec and kernel stuff is new territory for me (well, android is relatively new to me still also..) - so I am just trying to learn/do what I can.. The more getting involved, the merrier.
Sent from my MB865 using xda app-developers app
I just received my dev Atrix 2 today thanks to rvalentin913.
My goal with the device is to get it running alongside our other devices (Droid3, Bionic, RAZR's and Droid 4) so that it can be merged into CM's official devices.
However there does seem to be some missing pieces so to speak in the kernel that I'll be looking to fix over the next few weeks.
I'll try and comment on what I'm seeing in the posts above:
1. "omapdss DSI error: Failed to receive BTA" This indicates that the LCD on some of the devices isn't directly supported by the kernel and/or not being setup correctly by the devtree. Also very likely the cause of a blank screen (obviously).
2. "PVR_Kerror):BridgedDispatchKM: Initialisation failed. Driver unusable" indicates that pvrsrvinit didn't complete the initialization of the SGX libs for 1 reason or another. This could many things here and possibly related to #1. I'll have to run a strace or other tests to see where it's failing.
3. I'm reverting the mem= param back to 1023M in the kexec kernels due to a bug in the way Motorola has the kernel setup. They set the SMC driver memory to 2M, but the driver itself will expand to a minimum of 3M. The way the kernel is setup this area is designated right at the very top of memory. So Motorola probably didn't understand why they were getting odd memory issues when using the 1024 setting (this effectively pushes the SMC area out of the 1GB RAM limit). So they dropped the mem= parameter to 1023 where the SMC driver would set the start of SMC memory to 1021M and drift up to 1024.
4. Also the ATAGS which point to the devtree memory location have a tendancy to be cleared out at the drop of a hat for some reason. And that causes an empty devtree to be read into memory. (IE: Bad BP 0[ID: 0x0], Is this a Phone). I'm also chasing this down to see what clears out this memory area. The first time it was an early cache setup by the SMC driver, but there's somewhere else now as well.
What makes this complicated is that the memory location for the devtree and atags is decided at the point of kexec. So it can be a bit random causing this issue to only occasionally show up.
Anyway, I'll try and post a full thread w/ full support once I get my end up and running on the Atrix 2.
I haven't decided yet how I want to boot the device into a 2nd ROM. Currently Safestrap doesn't use external SD cards for rom-slots and to use the internal area, I would need to play some tricks on the OS using the fuse daemon (treat it like an internal SD card). Personally, I think the internal area gives the best performance and I'm leaning towards this route.
But, I won't make anyone flash over their stock system. Ever.
EDIT: I just read through some of the bootlogs and I'm confused about the end of the one here:
http://www.mediafire.com/view/?z4pibf2at3u4i7e
- "init: cannot execve('/system/bin/debuggerd'): No such file or directory" This looks like an obvious missing file, but I wonder why it's being called in the first place.
- procfs_write: version magic '2.6.35.7 SMP preempt mod_unload ARMv7 ' should be '3.0.8 SMP preempt mod_unload ARMv7 '
- dirty_arm_kexec: version magic '2.6.35.7 SMP preempt mod_unload ARMv7 ' should be '3.0.8 SMP preempt mod_unload ARMv7 '
- dirty_kexec: version magic '2.6.35.7 SMP preempt mod_unload ARMv7 ' should be '3.0.8 SMP preempt mod_unload ARMv7 '
These are GB-based kernel modules built for kexec trying to execute at the end of the log? *boggle*
Hashcode said:
I just received my dev Atrix 2 today thanks to rvalentin913.
Click to expand...
Click to collapse
Nice (I was kinda hoping/guessing it was you).
Will be very glad to see you digging into this phone also. Let me (or any of us) know if you need any assistance..
And thanks again for your major efforts and contributions in general.
Sent from my MB865 using xda app-developers app
Hashcode said:
I haven't decided yet how I want to boot the device into a 2nd ROM. Currently Safestrap doesn't use external SD cards for rom-slots and to use the internal area, I would need to play some tricks on the OS using the fuse daemon (treat it like an internal SD card). Personally, I think the internal area gives the best performance and I'm leaning towards this route.
But, I won't make anyone flash over their stock system. Ever.
Click to expand...
Click to collapse
Sir, the moto guys at China have done that. They mount /data/media as internal sd. i.e., the stock me865 roms have it. I will upload the ramdisk, vold.fstab, vold.fstab.swap and the build.prop when I get to my comp. I tried using 2nd init with the changes in ramdisk, included the fstab files and made the changes in build.prop but that did help me.. let me know if anything else is required.. for bmm, we just mount data for int and the virtual systems are stored there.
And thanks again for all the work you have done..
Sent from my MB865 using Tapatalk 2
Ravikirancg said:
Sir, the moto guys at China have done that. They mount /data/media as internal sd. i.e., the stock me865 roms have it. I will upload the ramdisk, vold.fstab, vold.fstab.swap and the build.prop when I get to my comp. I tried using 2nd init with the changes in ramdisk, included the fstab files and made the changes in build.prop but that did help me.. let me know if anything else is required.. for bmm, we just mount data for int and the virtual systems are stored there.
And thanks again for all the work you have done..
Sent from my MB865 using Tapatalk 2
Click to expand...
Click to collapse
Ah, yep, the /data/media mount is managed via the fuse daemon as a simulated VFAT partition, and needs to have FUSE support in the kernel (easily done in kexec).
Any idea why there are GB kexec modules trying to execute in that log?
Hashcode said:
Ah, yep, the /data/media mount is managed via the fuse daemon as a simulated VFAT partition, and needs to have FUSE support in the kernel (easily done in kexec).
Any idea why there are GB kexec modules trying to execute in that log?
Click to expand...
Click to collapse
ah! It requires a modified kernel as well! Thank you. That was the missing piece when I tried it some months ago. Well any way, the good news is that I have managed to emulate internal sdcard on stock searet. I just need to make out all the necessary changes that need to be made in the build.prop. For now, I just used miui build.prop. So that issue is more or less solved except for att users may have to erase cid to flash the hktw boot.img
EDIT: Well a little more work needs to be done I guess.. just some fc..
regarding the GB modules, maybe I was just experimenting.. since its happening after phone is overclocked, its my doing I guess. I will try loading on stock rom again and will let you know..
and take a look at this. defy having kinda the same issue. http://mcbawse177.appspot.com/pastebin.com/31VLSvyJ
quarx might have an idea on how to solve this.. look at line 1046
alteredlikeness said:
One more thing, take a look at the atags with a hex editor...
Click to expand...
Click to collapse
that was interesting.. well, among the currently supported phones, all have that partition table except XT875. Only that has lbl and lbl_backup like our phone but it has an emstorage at p26 and p27 is sgpt. here (also take a look at the other models listed there.) I was once just trying kexec with all the devtrees and there was one devtree using which, my keypad got lighted up after kexec was executed. with all others, the keypad would turn off and stay as such. I will try them again. Oh and just for fun (if you have moto drivers software installed on comp), download the devtrees for all the devices, replace one of them, turn off phone, turn it back on with kexec enabled, connect the phone to comp and take a look at the drivers that windows install. change the devtree and do it again..
Ravikirancg said:
that was interesting.. well, among the currently supported phones, all have that partition table except XT875. Only that has lbl and lbl_backup like our phone but it has an emstorage at p26 and p27 is sgpt. here (also take a look at the other models listed there.) I was once just trying kexec with all the devtrees and there was one devtree using which, my keypad got lighted up after kexec was executed. with all others, the keypad would turn off and stay as such. I will try them again. Oh and just for fun (if you have moto drivers software installed on comp), download the devtrees for all the devices, replace one of them, turn off phone, turn it back on with kexec enabled, connect the phone to comp and take a look at the drivers that windows install. change the devtree and do it again..
Click to expand...
Click to collapse
Well, about the devtree - I found that wang added this to the finalize_release script that initializes the cmdefy bootmenu recovery (courtesy of Hashcode, apparently):
Code:
#!/sbin/sh
PATH="/system/xbin:/system/bin:/sbin:${PATH}"
DEVTREE_PARTITION=/dev/block/mmcblk1p12
KEXEC_DEVTREE=/system/etc/kexec/devtree
#For kexec boot, we need a special devtree from each phone model
#So dump a devtree
#Note /dev/block/mmcblk1p12 is the devtree partition for edison
#And 65K is enough
#Credits for Hashcode for this info
[ -f $KEXEC_DEVTREE ] && rm -r $KEXEC_DEVTREE
busybox dd if=$DEVTREE_PARTITION of=$KEXEC_DEVTREE bs=1 count=65000
I made it as a stand-alone script that I was running with my attempts at booting my kexec builds with BMM... no luck - but like I said, my current kexec build has other issues as well I think..
alteredlikeness said:
Nice (I was kinda hoping/guessing it was you).
Will be very glad to see you digging into this phone also. Let me (or any of us) know if you need any assistance..
And thanks again for your major efforts and contributions in general.
Sent from my MB865 using xda app-developers app
Click to expand...
Click to collapse
Ditto hash, great to see you grabbing a seat on A2train.
ALL ABOARD. NEXT STOP KEXEC. Please raise your trays. Lock your seat back to comfortable position, and enjoy the ride!
Any help I can bring, I am but a humble servant.
Sent from my MB865 using xda app-developers app
Hmm.. take a look at the tombstone.
http://pastebin.com/4jrTaAbF
Its just an issue with graphics driver? But it did boot up a couple of times.. and how does it boot up on some a2s?
Sent from my MB865 using Tapatalk 2
alteredlikeness said:
Well, about the devtree - I found that wang added this to the finalize_release script that initializes the cmdefy bootmenu recovery (courtesy of Hashcode, apparently):
Code:
#!/sbin/sh
PATH="/system/xbin:/system/bin:/sbin:${PATH}"
DEVTREE_PARTITION=/dev/block/mmcblk1p12
KEXEC_DEVTREE=/system/etc/kexec/devtree
#For kexec boot, we need a special devtree from each phone model
#So dump a devtree
#Note /dev/block/mmcblk1p12 is the devtree partition for edison
#And 65K is enough
#Credits for Hashcode for this info
[ -f $KEXEC_DEVTREE ] && rm -r $KEXEC_DEVTREE
busybox dd if=$DEVTREE_PARTITION of=$KEXEC_DEVTREE bs=1 count=65000
I made it as a stand-alone script that I was running with my attempts at booting my kexec builds with BMM... no luck - but like I said, my current kexec build has other issues as well I think..
Click to expand...
Click to collapse
Actually we were talking about this and it doesn't work. The devtree needs to be chopped off right at the last null in the file (where it starts turning to all "FF" in a hex editor.
I think it would be a great idea to modify this tho so that it does work.
Ravikirancg said:
Hmm.. take a look at the tombstone.
http://pastebin.com/4jrTaAbF
Its just an issue with graphics driver? But it did boot up a couple of times.. and how does it boot up on some a2s?
Sent from my MB865 using Tapatalk 2
Click to expand...
Click to collapse
This error reminds me more of when there is no gralloc.omap4.so symlink in /system/vendor/lib/hw. Doesn't look exactly kexec related.