Hello everyone.
I use M8Sx Single SIM Europe variant.
I changed my up and bottom covers of front, and my proximity sensor doesn't work.
It works after I use Rezound Proximity Sensor Calibrator app or some proximity sensor detection app, but after a reboot, I have to reopen the app and calibrate it again.
Is there a solution for this?
Thanks.
Related
Hey everybody!!!
How I can deactivate the proximity sensor. Because it's broken on my XT925 and I can't Hang off. I know there is some apps to do that but I think there is some lines in the build.prop to desactivate directly.
Thanks!!
My proximity sensor appears broken so it always is detecting "covered". This causes the screen to always go off when making a call.
Is there any way to disable the sensor and/or the call screen obeying the sensor?
I'm using CyanogenMod 10.1.2 on a Sprint Nexus S 4G.
Note that I've tried using Hardware Disabler to disable the gp2a driver (which should correspond to the sensor). Sadly doing that just causes the device to reboot,
I have a XT1031 running on Boost Mobile. I'm currently running official SlimKat build 9 but switch back to stock when I am expecting alot of calls since I can't find a voicemail app that works with Boost Mobile on custom ROMs. I've searched for months for a fix that works to correct the faulty proximity sensor but haven't had any luck. Does anyone know of a way to completely disable the proximity sensor?
BaumerGXP said:
I have a XT1031 running on Boost Mobile. I'm currently running official SlimKat build 9 but switch back to stock when I am expecting alot of calls since I can't find a voicemail app that works with Boost Mobile on custom ROMs. I've searched for months for a fix that works to correct the faulty proximity sensor but haven't had any luck. Does anyone know of a way to completely disable the proximity sensor?
Click to expand...
Click to collapse
I guess it is not possible to disable it... If you want to fix the proximity sensor you must flash your phone with an stock room...
The proximity sensor has been bad since I received the phone. It was a gift and out of warranty. My issue is there no matter if the phone is stock or running a custom ROM. I was hoping a dev would have some insight to disabling it with a prop/hex editor or something.
Caution DO NOT DO THIS unless you want your proximity sensor completely disabled!!!
Also you're doing this on your own risk!
So if your proximity sensor is not working at all, you can disable it completely by chopping it off the board. The light sensor is separate, so this won't affect your auto-brightness.
Open your phone (14 torx screws), pop out the back panel.Barware not to lose your Power and Volume keys.
You don't need to detach the battery, just go ahead and lift the board carefully ( there are videos on YouTube how to do that ).
Flip the board to your right hand side, be careful, the display flex is still attached, you don't want to break that.
You can now find both sensors on the top right corner of the board, the proximity sensor is the LEFT one when you face the board straight up.
Use a small flat screwdriver and with a semi-gentle push in its base you can chop it off.
You're done!
Reassemble carefully.
Thanks for the suggestion I'll try to find some of those YouTube vids you mentioned. But from what I've been reading is that the sensor is just an ambient light sensor that can detect proximity when coupled with an IR-LED so I'm not understanding how I can just chop off the prox sensor. I can't post the link but the article is on Andrux & me blog titled CT406: proximity and light sensor on MotoG
Sent from my Moto G
BaumerGXP said:
Thanks for the suggestion I'll try to find some of those YouTube vids you mentioned. But from what I've been reading is that the sensor is just an ambient light sensor that can detect proximity when coupled with an IR-LED so I'm not understanding how I can just chop off the prox sensor. I can't post the link but the article is on Andrux & me blog titled CT406: proximity and light sensor on MotoG
Sent from my Moto G
Click to expand...
Click to collapse
Proximity and light sensors are separate, so chopping off the proximity one won't affect anything, besides proximity not working and the circuit will report "open", which means no object near, hence your screen won't turn off.
There are many types of sensors and they might differ in the way they work.I seriously don't see what y you've said is related at all.
For anyone interested, I found a module for Xposed Framework called Disable Proximity Sensor and it works flawlessly
Sent from my XT1031
Hi
I have a problem with sensors. Sometimes they work, and sometimes they don't (Compass Magnetometer, Proximity sensor, Accelerometer, Ambient light sensor, Gyroscope). Checked also service tests (*#*#7378423#*#*).
I bought Z3 as used device. Had to replace microphone and week later LCD. Everything was working properly before and after replacing elements except sensors.
What can be the cause?
I have android 6.0.1 since I have Z3
When you check proximity sensor in service test does it works?
For me it seems like something was crashed or not connected properly because jack, microphone, proximity and ambient light is connected with one flex tape .
P.S. Today I had to disassembly Xperia Z3 because there was also problem with proximity sensor - at my case it works from time to time in service menu. Finally my problem was solved after revoming dust
If the sensors work, they work everywhere. Everything seems to be fine, also in service test. But if they don't work, also service tests are fail.
Proximity sensor and Ambient light sensor are on this element
gsmforyou.pl/files/313240969/tasma_gniazdo_zlacze_hf_czujnik_sony_z3_d6603 .jpg
but Compass Magnetometer, Accelerometer, Gyroscope are on mainboard.
So why they all don't work at this same time? I could change the element from the link but will this solve the problem?
hi, is anybody know if there any mod (magisk/xposed) that disable proximity sensor only?
already tried disable sensor on developer mode toggle, it working fine, but i only need the proximity sensor off (faulty hardware)
it makes the screen goes always black if receiving/call (phone & whatspp)
Already tried sensor disabler on Xposed also not working as it already outdated
im using 10.3.4 oxysgenOS
Try turning off the pocket mode in settings. Otherwise you'll have to manually press the power button so that it doesn't become dark.
mudepz said:
hi, is anybody know if there any mod (magisk/xposed) that disable proximity sensor only?
already tried disable sensor on developer mode toggle, it working fine, but i only need the proximity sensor off (faulty hardware)
it makes the screen goes always black if receiving/call (phone & whatspp)
Already tried sensor disabler on Xposed also not working as it already outdated
im using 10.3.4 oxysgenOS
Click to expand...
Click to collapse
Hello,
I have the same problem, did you find a solution?
Thanks
nope
i think the hardware sensor is faulty, and you need to change it
temporary solution is to disable hardware sensor on quick toggle (enable it on developer mode)
disable on receiving call, enable it again after that
i replaced the sensor (have to replace the damage oled screen because fall of the ground)
and now its working again