Related
The app is now on google play, get it there if you want it:
https://play.google.com/store/apps/...wsMSwxLDEsImNvbS5wZXJtby5zbWFydHN3aXRjaGVyIl0.
If you want to support the developer of this app you can get the prokey here:
https://play.google.com/store/apps/...EsImNvbS5wZXJtby5zbWFydHN3aXRjaGVycHJva2V5Il0.
Since this app is still very much in development you can see it as a donation, but a donation that gives you access to all the future development and features of this app. It will also give you start on boot and unlimited actions.
# What it does #
Basically what it does is it makes it possible to launch androids taskswitcher (recent apps) or call another action such as home, back, menu or turn screen off by waving your finger past the proximity sensor. You can also set an action to run when your proximity sensor is covered. With a little practice this really makes multitasking much faster. There is now also actions for media like volume, play pause and such, aswell as a flashlight (only tested on galaxy note, probably wont work on all devices) The media-actions are not properly implemented yet, so all actions may not work on all devices.
There is now some other features aswell.
Smart keep screen on will keep your screen on as long as you hold the phone in your hand. When you put it down, it will let the screen go off. I have only tested it on a galaxy note. Feedback on this would be welcomed.
You can now also run an action to keep the screen on permanently, or atleast until you run the action again.
Feel free to try it out.
# Instructions #
Configure actions for each number of waves up to six. The action you choose will then be executed when you wave.
You can also configure an action to launch when you cover your proximity sensor and for when the device is shaken.
If you have trouble with the gestures and smartswitcher recognizes the wrong gesture, you can adjust the gesture sensitivity. If you put this on low, the response and gesture recognition will be fast, but you will have to wave fast also. On high, the opposite is true. If you are not Lucky Luke like me, medium or high should work.
# Planned features #
Multiple actions for one event
Actions: toggle wifi, mobile data, bluetooth, launch apps, etc
Device facedown event
"Franticwave", action for when you wave past all six waves and then stop.
Suggestions, anyone?
# Known issues #
If the gestures stops working, particularly after using the screen off action, the gesturecounter probably consumed some magic mushrooms and forgot to count the waves and got all confused. You can either restart smartswitcher or wave until it starts picking them up again.
# Other #
The powerconsumption of the proximity sensor is extremely low so the impact on your battery should be fairly low. Did anyone using this notice a reduction of battery life, and I mean that in a more scientific way than just checking under battery in your system settings? Was it 5 minutes or 1 hour?
Zenblom made a video of smartswitcher:
He also compiled a list on working devices:
# Confirmed working devices #
- Samsung Galaxy Note GT-N7000
- Samsung galaxy s3 i9300 international version
- Samsung Galaxy Tab 7.7 P6800
- Sony Ericsson xperia neo v
- HTC One X
- Sony Ericsson Arc S
- Galaxy Nexus
- HTC evo 3d
- Samsung Galaxy s2
Thanks Zenblom!
# Changelog #
Version 1.1.7 2012-08-25
-Added cm10/JB compatible recent apps option.
Smartswitcher behaves really badly in cm10. Since everything worked great in cm9 that I just ran ten minutes ago I am not sure how to handle this. A use at your own risk warning for cm10 maybe?
Version 1.1.6 2012-08-23
- Added non root actions: Toggle airplane mode, launch browser, launch calculator, launch messages, send message, launch camera, launch contacts. Also end call, but it did not work properly so its set invisible for now.
Decided to freeze the features here, or this thing is never going on google play. If you cant find something seriously wrong with this version until tomorrow, its going on play. After that, I will continue developing the app but the updates will come via google play.
The smart keep feature... I may have to scrap that idea. I cant get it to work reliably. It can be made to keep the screen on on very small movements but then it wotn turn the scren off instead. Will fiddle a bit more before I give up. Its now set quite sensitive so it may not turn your screen off properly now, if so you can just press the powerbutton or disable the damn thing
If you have any ideas on how to make this work better, please let me know!
Version 1.1.5 2012-08-21
- Fixed the bug that caused to ui to crash or slow down when you were shaking the device. Should work fine now, so there should now be no need to close the ui when trying actions any more.
- The smartswitcher listening button will now completely (hopefully) unregister sensorlisteners so if you press this button there should be no batterydrainage at all.
- Made the handling of sensors a bit more effective. Now if you have no action on any event that need the accelerometer, it wont register and use battery power. If you set none on accelerometerevents the sensorlistener will unregister and stop using battery. The same goes for the proximity sensor.
I was hoping that the users with a glowing proximitysensor will tell me if I got this to work right
Version 1.1.4 2012-08-20
- Toggle wifi, bluetooth, rotation lock, ringer volume, audio volumeactions added. The do not need root and does things the right way. Audiovolume does not seem to work, will check why.
- Added something I called quick actions menu, but the first time its launched you may wonder why I did not name it slow actions menu After its loaded once it should work faster, it could slow down every once in a while, I will fix this. Note: if you cancel this menu strange things could happen, I forgot to implement oncancel. The plan is that you will be able to make these favouritemenus yourself and add the actions you want, and trigger your new menu on any event. I need a database handler som I have to fix this first. I never intended for this app to do all of this stuff, if I did I would have done things differently from the beginning. I noticed that this menu is counted as a pro action so you can only use it 20 times before it resets, sorry, did not mean for that to happen. For now there is only a few actions hardcoded in there.
Please close Smartswitcher settingsscreen before you start playing with the actions, strange things can happen if you dont. This is betastuff, so you cant expect things to be perfect even though I do my best for them to be as good as possible
Version 1.1.3 2012-08-18
- Added action keep device alive. If you run this, your device will not sleep until next time you run it, period. It wont activate if the device is already being kept awake by the smart keep screen on function, have not tested this very carefully. If you feel a burst of short vibrations, the device is being kept awake. If you use this, dont forget to turn it off, or it will drain your battery.
- Adjusted the shakedetection. It should now work much better and should notmake doubleactions. Try it and tell me if it is better or worse.
- Adjusted the smart keep screen on function to a little less sensitive. Sometimes it did not turn the screen of because i set the sensitivity too high so it detected movement event when it was fairly still. Try it and tell me if I made it better or worse.
- Added support for up to six waves by request. Tested it some, it seemed to work fine.
Version 1.1.2 2012-08-17
- Added action flashlight. Will probably not work on all devices, but it works on my note atleast. Will add more variants for other devices.
- Added EXPERIMENTAL Smart keep screen on function. There is no adjustable settings yet, just on and off. You can try it by setting your screen timeout at a low value like 15 seconds. As long as you hold your phone in your hand, the screen should keep on. If you put it down the screen should go off in 30 seconds or so. I adjusted it to work on my device, but that does not mean it will work good on yours. There is no settings for it yet. Try it, if you dont like it, disable it. Will also spend some time on next version with the shake detection, Its teally not what I wanted it to be. It works, but barely.
Version 1.1.1 2012-08-16
- Added shakedetection. You can now set an action for shake. Note: Will cause the ui to crash, press backbutton to close smartswitcher settings before using it and it should work fine.
Version 1.1.0 2012-08-15
- No visible changes, but lots of changes in the code. I hate spagetticode, so I spent some time removing and rewriting things. Sensorcovered will now really have zero delay if you set that.
- Made the number of proactions allowed to 20, as I said I had done. It seems it was only 10
Version 1.0.9 2012-08-13
- Fixed sensor covered, now it wont trigger any action if you remove your finger within the delay time.
- Added a BUNCH of actions. Some will work on your device, some will not. (Depending on rom, installed apps etc) The new features are for the pro version (Yes I will make a pro version.) I am a nice guy so everything you had before still works, plus you can use the profeatures for a total of 20 times, after that they will reset to no action. You are free to select pro features again for another 20 times. Sorry about this, but I have spent quite a few hours on this app now, and I would not mind getting a few bucks for my work. Please tell me what price you find fair for this app, if any price at all
- Made it so that gestures will work on active phonecall. This means actions like for instance hangup will actually hangup the call. Sensor covered should not interfere with anything now.
Version 1.0.8 2012-08-11
Note: Remaining bug, sensor covered works but the delaysetting does not do what it is supposed to do. That is, even if you remove your finger from the sensor within the delay time, the action will still trigger. Sorry about that, will fix. Too tired now
- Fixed the bug that caused settings to not save after a while. Should work fine now.
- Added configurable settings for sensor covered so you can now set any action for that event. If you have a device with slow sensor you should now be able to launch recent apps by setting sensor covered delay to 0 and action to recent apps. You can now also set screen off as action on any wave.
- Fixed vibration feedback for sensor covered event.
- Removed Screen off setting as it is no longer needed.
- fixed some other bits and pieces and cleaned up the code.
Version 1.0.7 2012-08-09
- Completely rewrote all of the code for taking care of actions. If I am lucky this will take care of the strange superuser permissions error. Unfortunately this way will mean an ever so slightly slower response, but if it turns out this way works better, I will see if I can speed it up some.
- Lots of bugfixes. Wavesettings and gestures off in landscape SHOULD work properly now. So SHOULD the screen off feature.
- Added button to stop Smartswitcher from doing anything at all. Now, please tell me what I have broken this time
Version 1.0.6 2012-08-08
- Added settings for all gestures. You can now disable/enable/configure individual gestures. I did test this, but not very carefully. I should stop doing this so late at night. Please tell me if you find problems.
Version 1.0.5 2012-08-07
- Added option to disable gestures when phone is in landscapemode. Now you dont have to kill smartswitcher if you find it unusable in landscape and then start it again when back in portrait. Let me know if it does not work as intended.
- Changed the vibrationfeedback on recognized gesture to a more gentle level.
- Find my sensor-mode is gone. Kind of useless feature anyway, good riddance to bad feature.
Version 1.0.4 2012-08-06
- Wave once for recent apps, twice for menu, three times for back, four for home. No customizable settings for this yet, I need to sleep now Oh, I broke find my sensor-mode.
Version 1.0.2 2012-08-05
- Configurable delay for the screenoff when sensor covered-feature added
Version 1.0.1: 2012-08-04
- Disableoption for screenoff "bug"
- Changed Get the feel-mode to Find my sensor-mode, hopefully this is not as confusing
More coming. If you have any ideas or suggestions, let me know.
ssspeq said:
Hello!
I made a little app that I am not sure if anyone but me will like. Basically what it does is it makes it possible to launch androids taskswitcher (recent apps) by waving your finger past the proximity sensor. With a little practice this really makes multitasking much faster. Atleast, thats what it did for me. I was hoping for some testers here on xda. I have only tested this on a galaxy note running paranoid, it seems to work fine on that rom on the note, but i would like to see some more testers.
Feel free to try it out. If anyone likes it i will put it on google play. By the way, you need root for it to work. I attached a full version except for autostart on boot that will not work in this version.
Click to expand...
Click to collapse
Well it vibrates but does not launched recent apps.
I like the ide Of it
CoopZor said:
Well it vibrates but does not launched recent apps.
I like the ide Of it
Click to expand...
Click to collapse
The fault may be mine, but just to be overly clear, you have to wave your finger past the sensor AND back again within a relatively small amount of time. Maybe you did that.
What is your phone running?
Hi,
I've been testing both an earlier version and current version and it works fine for me. Could be that I'm also running paranoid (v0.5) on a note.
I shot a video on an earlier version:
www youtube com/watch?v=gsIFtIxhD1g
(I'm not allowed to post links yet so you go figure)
Just tested it on stock LRG with CF-Root kernel. Works well.
AndroidGreenHorn said:
Just tested it on stock LRG with CF-Root kernel. Works well.
Click to expand...
Click to collapse
Cool! I hope it will be of some use to you. Thanks for testing!
Is this battery friendly? I love the idea and if it doesn't drain my battery quicker than usual I'll be using it instead of the long click of home button.
Please add an option to hide the notification icon. I don't think there is a need for it as this is a set it once and forget about it app. You don't go changing the settings every day.
Thank you and good luck with this awesome project!
EDIT: btw, I'm running stock rooted 4.0.4 and this works great!
Oh god that's a great idea ! Way faster than long-pressing home button. It works like a charm on jellybean cm10.
Sent from my GT-N7000 using xda app-developers app
moyajaya said:
Is this battery friendly? I love the idea and if it doesn't drain my battery quicker than usual I'll be using it instead of the long click of home button.
Please add an option to hide the notification icon. I don't think there is a need for it as this is a set it once and forget about it app. You don't go changing the settings every day.
Thank you and good luck with this awesome project!
EDIT: btw, I'm running stock rooted 4.0.4 and this works great!
Click to expand...
Click to collapse
I was expecting someone to tell me to remove the notification icon I know, It was really useful get to the settings quickly when I was developing it. I will see what I can do to remove it. As for the battery, I have not really noticed any change in drainage at all, but please tell me if you experience any bad impact on battery life.
Thanks for testing!
CreepyDroid said:
Oh god that's a great idea ! Way faster than long-pressing home button. It works like a charm on jellybean cm10.
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
Excellent! Wave on
One small notion i made: I recently installed WidgetLocker and it's possible to swipe your finger for recent apps while the lockscreen is active/visible. Not that it's disturbing but it's good to know! In ics lockscreen everything works as intended!
Doesn't work on mine unfortunately....I'm on LRG
Only vibrated
Sent from my GT-N7000 using xda premium
zenblom said:
One small notion i made: I recently installed WidgetLocker and it's possible to swipe your finger for recent apps while the lockscreen is active/visible. Not that it's disturbing but it's good to know! In ics lockscreen everything works as intended!
Click to expand...
Click to collapse
I am actually aware of this problem. I have sent an email to the developer of widgetlocker but no answer yet. I could not find a way to detect when widgetlocker was running so i could disable smartswitcher. I will keep trying to fix that issue. Thanks for letting me know!
DMax99 said:
Doesn't work on mine unfortunately....I'm on LRG
Only vibrated
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Thats a bit strange. It worked for a previous poster on LRG if I am not mistaken. I don´t mean to offend you, but are you sure you are doing it right? Set the sensitivity to high and try a few more times. If you enable the somewhat strangely named Get the feel mode, the phone will vibrate a little when it "sees" your finger, thats just to help you find the sensor. The Vibrattion setting will make the phone vibrate a little longer when you waved correctly. If you cant get it to work, let me know and I will try to help you get it working.
ssspeq said:
Thats a bit strange. It worked for a previous poster on LRG if I am not mistaken. I don´t mean to offend you, but are you sure you are doing it right? Set the sensitivity to high and try a few more times. If you enable the somewhat strangely named Get the feel mode, the phone will vibrate a little when it "sees" your finger, thats just to help you find the sensor. The Vibrattion setting will make the phone vibrate a little longer when you waved correctly. If you cant get it to work, let me know and I will try to help you get it working.
Click to expand...
Click to collapse
No matter how I slavery finger over it (fast or slow), it just vibrates and nothing happens....I'm on the stock LRG kernel.
Sent from my GT-N7000 using xda premium
You must de-select "get the feel"mode in the app menu, otherwise out only vibrates
Carefully crafted on my Galaxy Note, for your eyes only
I installed it minutes ago,
and it works great.
Switched to high.
I'm on classic rom v3.
Only thing is, deactivate vibration and feel mode, but still feedback with vibration.
sent from my G-Note
Not working on cleanote rom really like the idea though!
Will be keeping up to date with this for sure!
Sent from my GT-N7000 using xda premium
What a great app. Works perfectly. Stock lrg with cf root kernel
Works perfectly on Asylum. CM9 after a bit of practice. Thanks :thumbup::thumbup:
Sent from my GT-N7000 using xda app-developers app
I've had my S3 for a couple of weeks now, and while I've decided to abstain from the ROM merry go round for the time being, I have a list of things I'd like to see:
1. Changeable mouse pointer. It's too small and I can't really see it very well.
2. I don't see a way to select the back/menu/home buttons with my Bluetooth mouse.
3. I have the MHL adapter and need to be able to change the overscan in landscape mode. Also audio won't come out of the HDMI interface.
Otherwise it's an amazing device. This is a pretty short list, maybe I'll come up with more later. So far so good.
Pet Peeve 1 can be fixed by going on the "ROM merry go round"
1.) group sms in the stock messaging app does not properlywork
2.) Vibration cant be customized for notifications wit the built in program that lets you change vibration patterns
yosterwp said:
Pet Peeve 1 can be fixed by going on the "ROM merry go round"
Click to expand...
Click to collapse
Yeah, that's what I was wondering. If I can find enough reasons to make me want to switch.
No "Stay awake while charging"
Unlocked Verizon GS3
For me, No Google Wallet...
Things I have issues with currently:
Wifi is off, would you like to turn it on? or there are wireless networks available notifications. I have them disabled when opening a high data app with mobile data enabled, they still popup and are super annoying. There is a hack I need to try for this.
The MTP mount for media transfer to your SD card. It requires special drivers and makes it difficult to transport many files at once to or from and does not allow it to mount UMS (universal mass storage) which previously was the standard to work with car radios, dvd players, etc. I have a hack in place using a script now that allows me to mount UMS for my external SDCard, but is still an annoyance.
If you use a 32GB or greater sdcard, it has to be formatted by the phone or in windows to extfat32, which is an enhanced version of the FAT32 file system allowing for greater than 4GB files and a less heavy table of contents using more processing. This would be great except its Microsoft proprietary and because Samsung doesn't have the full specs on it, it loses and corrupts files on the card quickly when you start using it. Also, ROMS cannot support it, it was designed by MS to be hazardous to open source and GNU licensing. There are tools you can download to format FAT32, which I have had to do.
S Voice, it kind of blows. I miss my quick button press to open google voice command which is roughly 5x better, now S Voice is opened when I double tap home and I have to unlock my phone and go to the google widget and hit the mic to call on google voice which lowers the convenience of voice commands drastically.
The Samsung internet browser is lacking. It does not resize text to fit the screen on double tap properly and makes it more difficult despite the large screen. It keeps webpages loaded in memory even after reboot unless you close them in the window manager which you have to scroll to the top of the page and click a button instead of being in the menu button menu. It opens a new window often when I click on links....
The modem and radios are weak and unstable at times. I am constantly dropping my data connection in known good areas and with wifi. To top it off, I get the wifi notification AGAIN to connect to a network when that happens.
It has an overactive screen auto brightness which makes pics I view look like crap when they are actually not too bad if the screen wasn't on minimum brightness.
Settings are not in great order. There are three different settings and areas portraying just to haptic feedback. Did you enable it under sounds? What about disabling it being disabled again by default every time power saving mode is enabled? Did you change the vibration power from zero? Um....
Samsung has way too many unnecessary notifications of its own cluttering the notification screen. I get four from just plugging in headphones. Wireless notification is always there by default.
Boot time can be much faster, its actually internally boot looping in order to check authenticity of system files to void warranty claims if custom. The new unlocked boot loader boots in at least half the time, maybe less. Don't like the 4G LTE boot logo or loud unnecessary noise on boot either.
Verizon is dumbing down the search in the next OTA update and all phones from mid-July already are updated because of the apple patent lawsuit that disallows searching of local content on a mobile device on devices not running iOS!? I know I'm not taking that update.
Thank you thank you thank you for the unlocked bootloader leak now.
Things I like:
This list would be long, but I'm just going to say it is an amazing device for media consumption with its screen and features, battery life is impressive, the cameras are great, its fairly smooth and fast in navigation, and it just looks great now that I've got a case on it. Makes iPhones look fat and stubby. I have been having a blast with NFC tags, put one on my chest freezer to automatically open up the drink up page on untappd for checkins when I grab a beer. Soon I'll be making a few pages online that I can edit so that I can program NFC tags with the links and remotely manage the content they bring up.
devo1929 said:
No "Stay awake while charging"
Unlocked Verizon GS3
Click to expand...
Click to collapse
I have Extended Controls installed. It has a stay awake while charging toggle. My S3 actually stayed on while charging. I had to use the toggle to turn it OFF.
The IMEI issue is a pet peeve. I don't like issues that make me feel as though I am unable to crack flash
Sent from my SCH-I535 using Tapatalk 2
I switched to the Chrome browser which is a lot better than the stock one. I like that I can sync pages from my desktops.
It doesn't have reception as well as a Motorola would/did. Not sure if these upcoming updates will make reception better but I get weak reception in places my DX never had a problem with. Probably jump on a RAZR around tax time if nothing improves by then... Only issue
bassett said:
I have Extended Controls installed. It has a stay awake while charging toggle. My S3 actually stayed on while charging. I had to use the toggle to turn it OFF.
Click to expand...
Click to collapse
I use another app called "Stay Awake." It's nothing more than a 1x1 widget. Although, every time I reboot my phone, I need to toggle the widget again. The setting doesn't stick on a reboot.
Canute said:
I switched to the Chrome browser which is a lot better than the stock one. I like that I can sync pages from my desktops.
Click to expand...
Click to collapse
Although, Chrome doesn't reflow text to fit zoom in/out of a page. Neither does the stock browser, as mentioned previously.
Opera mobile browser is my new default on the Galaxy S III and has been quite fast, reflows zoomed text wonderfully and Opera Link provides a synch with desktop Opera.
- ooofest
Has my S3 for 3 days now.
By Droid Bionic never left 4g (after the leaked ice cream update). S3 4g coverage is spotty and not as strong when I do have it.
I miss my bionic's "Full brightness when viewing pictures" option also.
Sent from my SCH-I535 using xda premium
To disable the annoying connect to wifi, open the dialer and type *#6335623# this will enable a hidden menu option to disable.
Credit to ImgBurn for posting this option last week.
Sent from my SCH-I535 using xda premium
The camera sucks and signal sucks. That's about it.
annoyingduck said:
To disable the annoying connect to wifi, open the dialer and type *#6335623# this will enable a hidden menu option to disable.
Credit to ImgBurn for posting this option last week.
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
I get 'welcome to VW, call cannot be competed as dialed' ?
tekhna said:
The camera sucks and signal sucks. That's about it.
Click to expand...
Click to collapse
This is the first I've heard about the camera being bad. I think the camera is good. I'll give you the one about the signal tho
Sent from my SCH-I535 using Tapatalk 2
---------- Post added at 08:19 PM ---------- Previous post was at 08:14 PM ----------
For me, my pet peeve is that annoying "headphones connected" thing in the notifications. I don't like having my notification bar cluttered with useless stuff. I know my headphones are connected Samsung -.-
Sent from my SCH-I535 using Tapatalk 2
xXJay_RXx said:
This is the first I've heard about the camera being bad. I think the camera is good. I'll give you the one about the signal tho
Sent from my SCH-I535 using Tapatalk 2
---------- Post added at 08:19 PM ---------- Previous post was at 08:14 PM ----------
For me, my pet peeve is that annoying "headphones connected" thing in the notifications. I don't like having my notification bar cluttered with useless stuff. I know my headphones are connected Samsung -.-
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
Do a search for Galaxy S3 blurry. The camera can be pretty miserable.
tekhna said:
Do a search for Galaxy S3 blurry. The camera can be pretty miserable.
Click to expand...
Click to collapse
Yeah, it's great as long as you don't zoom... but the detail while zoomed is terrible...
haven't done any searches for it recently, I'm assuming since you guys mentioned it there's no fixes for it still...
I am loving the looks, I mean the Whitish themes everywhere, that's what I wanted for so long. Just some screenshots in case one want to look how some sections look, for fun, that's all. I am stating some of my views on it too, please share yours too.
However not everything is great, I don't like how they have ruled out the scaling on the options, you might encounter one or two mi****s every now and then. I mean when you tap on option of some app, the OK, Discard etc. options have no box outlining those options, so you don't know where the scaling finishes. They shouldn't have done that. Tapping with fingers (which is and will be mostly done) can't always be precise. I have already miss tapped in some places!
I also don't like how they changed the notification clock font size, the AM/PM font is bigger than the clock itself, weird. The lockscreen clock has also been redone, it now has a slimmer font that KitKat, which I am not a fan of.
And I don't know whether this is a placebo effect or not, but am I the only one who is feeling that the in call loudness (volume) is a little softer than KitKat? Don't know, can't be sure.
The Dialler app now goes full screen, I mean edge to edge, simple change yet looks much much better
The Multi-Window mode doesn't have any small U shaped notification any more when enabled at the side of the screen, you just long press the back button to enable or disable it.
The lock screen notifications are directly tap-able and expandable, instead of dragging down and then tapping it to expand it from KitKat.
I guess you guys can use this topic to report bugs, whichever you have found. If this topic seems like a duplicate then remove it immediately.
Have fun.
PS: One more thing, I flashed the Polish version of the ROM on my Arab N9005, 32 GB. I tried to flash the German ROM first, because it had multi CSC but it failed to flash, so keep that in mind, I mean I think the German ROM is meant for 16 GB variants only.
@devilsdouble can we make the white background black?
Sent from my SM-N9005 using Tapatalk
?awesome
devilsdouble said:
I am loving the looks, I mean the Whitish themes everywhere, that's what I wanted for so long.
Click to expand...
Click to collapse
I'm glad you like it. I bloody hate it. The white hurts, quite literally.
I also don't like how they changed the notification clock font size, the AM/PM font is bigger than the clock itself, weird. The lockscreen clock has also been redone, it now has a slimmer font that KitKat, which I am not a fan of.
Click to expand...
Click to collapse
Really? I never noticed... Oh right, I only use 24h clocks.
PS: One more thing, I flashed the Polish version of the ROM on my Arab N9005, 32 GB. I tried to flash the German ROM first, because it had multi CSC but it failed to flash, so keep that in mind, I mean I think the German ROM is meant for 16 GB variants only.
Click to expand...
Click to collapse
There is no 16GB Note 3 variant outside Asia... I recall there being an issue with the German rom when flashing over to another back when 4.4 came out. You needed the PIT file to sucessfully flash from the German rom to another. This could be related.
thahim said:
@devilsdouble can we make the white background black?
Click to expand...
Click to collapse
This! PLEASE! I suffer from migraines, any white screen causes needle spikes in my head! Imagine it for a second, every time you open a menu, it feels like someone drives a needle into your skull.
ShadowLea said:
I'm glad you like it. I bloody hate it. The white hurts, quite literally.
Really? I never noticed... Oh right, I only use 24h clocks.
There is no 16GB Note 3 variant outside Asia... I recall there being an issue with the German rom when flashing over to another back when 4.4 came out. You needed the PIT file to sucessfully flash from the German rom to another. This could be related.
This! PLEASE! I suffer from migraines, any white screen causes needle spikes in my head! Imagine it for a second, every time you open a menu, it feels like someone drives a needle into your skull.
Click to expand...
Click to collapse
From Developer menu you can invert colors, but that's ... all colors. At least you get rid of white.
I noticed a bug: turning the screen on isn't smooth, it looks like a two step process light up.
A missing "feature": hovering your finger over the lockscreen no longer produces an effect.
ShadowLea said:
I'm glad you like it. I bloody hate it. The white hurts, quite literally.
...
This! PLEASE! I suffer from migraines, any white screen causes needle spikes in my head! Imagine it for a second, every time you open a menu, it feels like someone drives a needle into your skull.
Click to expand...
Click to collapse
And this is why I don't plan on upgrading before at least xposed works perfectly and there is a way to force a black theme onto everything.
Okay after playing with the release for couple of hours I am really not liking it any more (except the colour part). I mean as usual with Samsung, they hurried up and released an unfinished ROM IMHO.
First and the most annoying thing I am noticing that the WiFi password (WPA) is reset every time when I toggle Flight mode back and forth. This is extremely annoying and I am sure there's a way around it, or am I wrong?
- Never mind, it's solved now.
Secondly, where is the Mute/Silent option? I mean it's either Ringer mode or Vibrate mode, but there's no Silent/Mute mode!
Thirdly, the upcoming alarm time doesn't show up on Lock Screen! What the heck?
If someone can tell me how to get rid of the above please tell me, I am mainly annoyed by the first problem though, the WiFi password reset problem.
I've not heard the password issue before. Are you sure it's not just a bug?
The silent mode is split.
You have one toggle that decides how you are notified. (the old sound toggle) Sets to either sound or vibrate.
And another toggle that decides what you're notified about. (Looks like an entry forbidden sign). All, Priority or None. This is where you set Silent mode.
If you set this to priority, you can decide which apps notify you. (settings > sound and notification) Call, text, etc.
If you set it to None, you're not notified with sound or vibration. The notification still shows up on the screen.
Be careful, as this will also silence alarms!
I would suggest priority mode and simply disabling everything in its settings except alarms.
The alarm on the lockscreen, nope. They removed it. Fortunately we can always use GO locker.
Sent From My Samsung Galaxy Note 3 N9005 Using Tapatalk
I believe the WiFi passwords not saving issue can be solved by editing build.prop (that is how I fixed it on the leaked version, haven't updated myself yet)
Look for ro.securestorage.support and change it from true to false. I tripped the KNOX flag long time ago (doesn't change my warranty) and I haven't noticed any misbehaviours.
ShadowLea said:
I've not heard the password issue before. Are you sure it's not just a bug?
Click to expand...
Click to collapse
Yes, it was a bug, I mean it was a problem because my bootloader wasn't updated. Reflashed the ROM, all is okay now.
ShadowLea said:
The silent mode is split.
You have one toggle that decides how you are notified. (the old sound toggle) Sets to either sound or vibrate.
And another toggle that decides what you're notified about. (Looks like an entry forbidden sign). All, Priority or None. This is where you set Silent mode.
If you set this to priority, you can decide which apps notify you. (settings > sound and notification) Call, text, etc.
If you set it to None, you're not notified with sound or vibration. The notification still shows up on the screen.
Be careful, as this will also silence alarms!
I would suggest priority mode and simply disabling everything in its settings except alarms.
The alarm on the lockscreen, nope. They removed it. Fortunately we can always use GO locker.
Sent From My Samsung Galaxy Note 3 N9005 Using Tapatalk
Click to expand...
Click to collapse
Yes, was playing with that Interruptions option and figured that, but still that's a weird way. Don't know why Google decided to ditch the Silent mode, well at least Samsung could have kept that.
Go Locker? Well I tried a lot of third party lockers last week, didn't like any of them. I guess I will have to find a different alarm clock app which could give me an option to show the upcoming alarm time on lock screen, it's such a nifty feature to have. There's a module in Xposed which shows the actual alarm time in status bar (instead of that damn alarm icon) but well Xposed is not yet ready for TouchWiz ROMs, but when it becomes okay I will simply install that module. In the meantime I will have to look for a alarm app, that's all.
^xposed alpha 1 already released have not yet used it though. Still playing around with stock unrooted rom.
cryostasis25 said:
^xposed alpha 1 already released have not yet used it though. Still playing around with stock unrooted rom.
Click to expand...
Click to collapse
Yep mate, just saw that. Is it working okay with TW Lollipop now, I mean no more boot loop? Don't really want to try, in case bootloop happens I will have to redo all those formats and all, which I simply hate.
The only Xposed module I badly need is MinMin Gurad, can't stand ads, and AdAway is, well, complicated.
I have had this update for about 10 days now and I seem to have issues I never had with this phone before. Nothing major, just annoying things like notifications for SMS not being 100% reliable, and if I use the keypad on a call it seems to add a number press when I put the phone to my ear and now for the first time, I am having trouble with my PC and my phone getting into file transfer mode. Has anyone else had anything strange happen since the update? Or am I just the lucky one.
So far it's fixed all of my issues. With my auto brightness, Bluetooth, and my locking issues. Haven't had any of the ones you've listed.
Sent from my SM-N920V using Tapatalk
Late notification in Nougat can be due to the more aggressive Doze. Turn off Optimization for your sms app to solve it.
The update did solve the sensor stop working bug they introduced in the last few updates, but yeah there are quirks I don't like:
- The checkbox to enable/disable auto brightness is now buried another click deeper.
- Samsung Themes are now not fully compatible with this Samsung Nougat update. #genius
- Status bar font is too small and weirdly tall.
- In optimized mode the lock screen disappears after 3 seconds. It's useless and there isn't a setting to increase this.
- the notification slider theme is horrendously difficult to read. Font is too small, locked to black on white text. It needs to go back to how it was.
On the flip side, the App drawer now auto sorts alphabetically. Only took them this long to solve that!
Sent from my SM-N920V using XDA-Developers Legacy app
ramiss said:
Late notification in Nougat can be due to the more aggressive Doze. Turn off Optimization for your sms app to solve it.
The update did solve the sensor stop working bug they introduced in the last few updates, but yeah there are quirks I don't like:
- The checkbox to enable/disable auto brightness is now buried another click deeper.
- Samsung Themes are now not fully compatible with this Samsung Nougat update. #genius
- Status bar font is too small and weirdly tall.
- In optimized mode the lock screen disappears after 3 seconds. It's useless and there isn't a setting to increase this.
- the notification slider theme is horrendously difficult to read. Font is too small, locked to black on white text. It needs to go back to how it was.
On the flip side, the App drawer now auto sorts alphabetically. Only took them this long to solve that!
Sent from my SM-N920V using XDA-Developers Legacy app
Click to expand...
Click to collapse
Interesting...but I'm not seeing most of that. What do you mean by "optimized mode" for the screen? In the display settings under "screen mode" I've got:
Adaptive display
AMOLED cinema
AMOLED photo
Basic
i'm set on Adaptive display. In the Screen Timeout section I've got it set to one minute. I put the phone down and timed it on my watch. the screen dimmed at 50 seconds and turned off at exactly 1 minute....so seems to be working unless I'm looking at something different than you?
Status bar font doesn't look too small to me but of course "too small" is subjective. Still, my old eyes are not as good as they used to be and I can read it fine without my glasses on. Tried swtiching screen resolutions back and forth between max an 1920x1080 and didn't notice a difference between them, just to see if it was a resolution issue.
Question I always as after a major OS update: Have you done a factory reset? I have not yet. I usually run it for a while as is and do a reset when I get some time. But in the past i've seen a reset cure any number of issues.
I've only noticed 2 things wrong.
No keyboard vibration feedback when on a call.
After google play services updated my gmail emails not coming automatically. Removing/adding my google account fixed that.
ratman6161 said:
Interesting...but I'm not seeing most of that. What do you mean by "optimized mode" for the screen?
...
i'm set on Adaptive display. In the Screen Timeout section I've got it set to one minute. I put the phone down and timed it on my watch. the screen dimmed at 50 seconds and turned off at exactly 1 minute....so seems to be working unless I'm looking at something different than you?
Click to expand...
Click to collapse
Its not optimized mode for the screen. Its Power Optimized Mode (go to the settings battery menu). My comment was for the "lock screen" dissappearing after 3 seconds. This is the screen that pops up when you turn on power and BEFORE you unlock the phone. It shows summaries of notifications... for all of 3 useless seconds.
ratman6161 said:
Question I always as after a major OS update: Have you done a factory reset? I have not yet. I usually run it for a while as is and do a reset when I get some time. But in the past i've seen a reset cure any number of issues.
Click to expand...
Click to collapse
I have not reset the phone and refuse to unless something in the OS simply cannot be resolved. Just like I'm not going to reformat my Windows PC drive if a program has a bug. You should reset your system/dalvik cache. Although that should be done automatically during the update.
ramiss said:
Its not optimized mode for the screen. Its Power Optimized Mode (go to the settings battery menu). My comment was for the "lock screen" dissappearing after 3 seconds. This is the screen that pops up when you turn on power and BEFORE you unlock the phone. It shows summaries of notifications... for all of 3 useless seconds.
I have not reset the phone and refuse to unless something in the OS simply cannot be resolved. Just like I'm not going to reformat my Windows PC drive if a program has a bug. You should reset your system/dalvik cache. Although that should be done automatically during the update.
Click to expand...
Click to collapse
I too don't reformat my Windows PC to fix a bug. But I do do it after a major OS update such as Windows 8.1 to Windows 10 for example. No, you don't have to but...
Any way to turn on autocorrect in the quick reply feature? When I hit reply and the keyboard pops up (standard Samsung keyboard) auto correct and predictive text do not appear not function leaving me to have to go back and retype my errors. It literally appears and works everywhere else.
I can't seem to change the font size in the Message app. The setting doesn't stick. Anyone else?
Problem I have with the update is phone calls always start off with the external speaker. I have to tap the speaker icon a couple times to get the internal speaker going.
Sent from my Touchpad using XDA-Developers Legacy app
rpoitras said:
I can't seem to change the font size in the Message app. The setting doesn't stick. Anyone else?
Click to expand...
Click to collapse
I have changed my font to Samsung Sans and it changed in the messaging app with no issues. I'm using Samsung's default messaging app.
Honestly I'm having zero issues since the update. I did a factory reset following the update. I realize we shouldn't have to do this but I do it after every big update just to be sure.
Sent from my SM-N920V using XDA-Developers Legacy app
It really boggles my mind all the problems people are posting about. I have had ZERO issues and have not done a factory reset at all.
gregcapps said:
It really boggles my mind all the problems people are posting about. I have had ZERO issues and have not done a factory reset at all.
Click to expand...
Click to collapse
Check the web....lots of problems.
Sent from my SM-N920V using XDA-Developers Legacy app
I couldn't get over how broken Nougat is on the Note 5 so I just went ahead and upgraded to the S8+... Absolutely 0 issues with Nougat on this device.
gregcapps said:
It really boggles my mind all the problems people are posting about. I have had ZERO issues and have not done a factory reset at all.
Click to expand...
Click to collapse
Same here! I'm pretty shocked.. Mine is smooth, and I have yet to reset either..
But then, there are a ton of units in circulation.. Especially after the 7 fallout..
Hmmnnn.. It'd be nice if they released the 8 early(that just popped into my brain)!
Sent from my SM-N920V using Tapatalk
skunkle88 said:
I have changed my font to Samsung Sans and it changed in the messaging app with no issues. I'm using Samsung's default messaging app.
Honestly I'm having zero issues since the update. I did a factory reset following the update. I realize we shouldn't have to do this but I do it after every big update just to be sure.
Sent from my SM-N920V using XDA-Developers Legacy app
Click to expand...
Click to collapse
It's not just changing the font. I changed mine to Samsung Sans as well and it worked fine. My issue was in the Messages app, in Settings -> Font Size, if I tried to change the font size it wouldn't stick. The font was a tad small so I wanted to increase it one level. I realized last night that once you're in the Font Size menu the header is just plain white (at least on my phone) so it looks like there is no way to back out. I was using the back button which probably cancelled the edit. I tried again but clicking the blank header and now it's working. Am I the only one who sees the white only header? All other menus seem to have the header describing the screen with back (less than) symbol, e.g. "< MESSAGES SETTINGS" but it's missing on the Font size menu.
rpoitras said:
It's not just changing the font. I changed mine to Samsung Sans as well and it worked fine. My issue was in the Messages app, in Settings -> Font Size, if I tried to change the font size it wouldn't stick. The font was a tad small so I wanted to increase it one level. I realized last night that once you're in the Font Size menu the header is just plain white (at least on my phone) so it looks like there is no way to back out. I was using the back button which probably cancelled the edit. I tried again but clicking the blank header and now it's working. Am I the only one who sees the white only header? All other menus seem to have the header describing the screen with back (less than) symbol, e.g. "< MESSAGES SETTINGS" but it's missing on the Font size menu.
Click to expand...
Click to collapse
Not sure if this is your issue, but many interface issues, including unreadable white headers, stem from the fact that Themes from prior Android versions (even Samsung Themes) are NOT fully compatible with Nougat. If you attempt to re-apply your theme then you should get that warning. I had to apply a brand new theme to solve my header issues.
Sent from my SM-N920V using XDA-Developers Legacy app
ramiss said:
Not sure if this is your issue, but many interface issues, including unreadable white headers, stem from the fact that Themes from prior Android versions (even Samsung Themes) are NOT fully compatible with Nougat. If you attempt to re-apply your theme then you should get that warning. I had to apply a brand new theme to solve my header issues.
Sent from my SM-N920V using XDA-Developers Legacy app
Click to expand...
Click to collapse
Yep, that was it. I now see Cancel and Done in the header. Thanks!:good:
Gmail broken.....google play broken, phone broken......too bad
Sent from my SM-N920V using XDA-Developers Legacy app
rpoitras said:
It's not just changing the font. I changed mine to Samsung Sans as well and it worked fine. My issue was in the Messages app, in Settings -> Font Size, if I tried to change the font size it wouldn't stick. The font was a tad small so I wanted to increase it one level. I realized last night that once you're in the Font Size menu the header is just plain white (at least on my phone) so it looks like there is no way to back out. I was using the back button which probably cancelled the edit. I tried again but clicking the blank header and now it's working. Am I the only one who sees the white only header? All other menus seem to have the header describing the screen with back (less than) symbol, e.g. "< MESSAGES SETTINGS" but it's missing on the Font size menu.
Click to expand...
Click to collapse
I just discovered you can change font size within the actual message. Use the 2 finger pinch to zoom in and out.
Sent from my SM-N920V using XDA-Developers Legacy app
Hey guys.
Stumbled upon this on YouTube. Bought the app and I can confirm that it works.
This is the app: https://play.google.com/store/apps/details?id=com.used.aoe
Here's the video I found on YouTube:
I managed to get it setup just the way I like. The guy in the video is a bit hard to understand but the video is good enough to get you started.
If your looking for a deeper dive into the optimal configuration process try this thread
https://forum.xda-developers.com/s10-plus/how-to/workaround-missing-notification-led-edge-t3919286
Enjoy!
thanks a lot =)
But is it posible to set different colors for different apps?
for example
green = whatsapp
blue = facebook ....
UPDATE: there is an option .... "when a notification comes" there you got the option "select enabled aps ots color and time" the blue button =)
neigo said:
thanks a lot =)
But is it posible to set different colors for different apps?
for example
green = whatsapp
blue = facebook ....
Click to expand...
Click to collapse
Yes
Thanks for the effort.
Just tried it, buggy as hell and didn't play nice with my lock screen. Also every 30 seconds the screen would flicker.
I'll keep an eye on it and maybe try again after more refinement.
bomp306 said:
Just tried it, buggy as hell and didn't play nice with my lock screen. Also every 30 seconds the screen would flicker.
I'll keep an eye on it and maybe try again after more refinement.
Click to expand...
Click to collapse
I had nothing but issues out of the app. Notifications wouldn't notify, the lock screen turned on and off randomly, there were no edge lighting effects no matter what I adjusted. I even tried to use the camera cutout, it again did not work.
This is a VERY bloated app, containing a LOT of features and options that frankly, are of no use to me or of no interest to me. I want an app that it's ONLY purpose is to alert me when I get messages, calls, and email. one that does not have so much bloat so that the developer can focus on the feature that is most sought after at the moment.
Just my two cents.
tl;dr App is junk, has too much junk, we need a debloated app.
It's a start...
b3y0ndd34th said:
I had nothing but issues out of the app. Notifications wouldn't notify, the lock screen turned on and off randomly, there were no edge lighting effects no matter what I adjusted. I even tried to use the camera cutout, it again did not work.
This is a VERY bloated app, containing a LOT of features and options that frankly, are of no use to me or of no interest to me. I want an app that it's ONLY purpose is to alert me when I get messages, calls, and email. one that does not have so much bloat so that the developer can focus on the feature that is most sought after at the moment.
Just my two cents.
tl;dr App is junk, has too much junk, we need a debloated app.
Click to expand...
Click to collapse
Come on! This app might not be right for you, but the developer should at least be given some credit/thanks for the effort taken to solve a problem, for which several users are seeking a not really forthcoming solution from Samsung. You "want an app...", but the developer created something and shared it. Granted, the app has far too many options and choices, but I was able to get it working to my satisfaction. Let's be thankful first .
- Paul
cmexec said:
Come on! This app might not be right for you, but the developer should at least be given some credit/thanks for the effort taken to solve a problem, for which several users are seeking a not really forthcoming solution from Samsung. You "want an app...", but the developer created something and shared it. Granted, the app has far too many options and choices, but I was able to get it working to my satisfaction. Let's be thankful first .
- Paul
Click to expand...
Click to collapse
Okay, okay, okay. I may have been a little harsh. I didn't mean to demean to developer. I am very thankful they have taken the time to create this app out of the kindness of their heart, as well as make the app free. I appreciate the work they have done and I would even donate if I could get the app to work; however it's not very user friendly tough, and in my opinion, could use a lot of work on many different aspects.
My main issue with the app is that it does not work as intended. I have tried using the youtube video settings, playing with options, etc.
I download and re-install this app about 5 times a day in hopes that MAYBE one time I can get it to function as intended. But I do not get any kind of Edge lighting or Notch cutout alert when I get messages, and that is the sole purpose of my attempts with this app, if I could find something similar or something that better served this purpose I would use it instead.
Sometimes, while using the apps lock screen, it will display the little icon and the message but then it goes away, and doesn't re-alert like it is suppose to, and the light affects do not appear. I have tried leaving it as the stock color and using a custom color. I have tried using the app lock screen, I have tried using the settings within the app to let it manipulate the wallpaper and lock screen, tried it with an image and also just a black background. I never even delved into setting different colors for apps, I can't get the dang notifications to work!
end rant
Do you have edge light on? Worked for me first try. I am not saying its 100% but for free and for now to wait to see if Samsung might give us we want I will leave it on my phone.
hello,
with this app is there a setup to leave the screen off when a notification comes in and only the cam ring turns on then?
thanks
m8980 said:
hello,
with this app is there a setup to leave the screen off when a notification comes in and only the cam ring turns on then?
thanks
Click to expand...
Click to collapse
Yes
it is working a bit strange for me as well. I've managed to get it to ALMOST work how I want, but I can't figure out why it will do random things
-- for a while it was turning on my screen when the edge lighting came on, which was pointless. I changed a lot of settings in troubleshooting, but I'm not sure what I did to fix it
-- also, it does notify every 30 seconds even though I have no new notifications. that one I haven't figured out yet
It does work as advertised though, despite the bugs I can't fix. It will either light up my edge lighting or the notch around the camera (which I prefer). so props to the dev for figuring that part out and here's to hoping the rest of the bugs get worked on the S10 (and my S10+). it seems to be working for other devices (I originally found it here for the oneplus)
dragonOL2 said:
it is working a bit strange for me as well. I've managed to get it to ALMOST work how I want, but I can't figure out why it will do random things
-- for a while it was turning on my screen when the edge lighting came on, which was pointless. I changed a lot of settings in troubleshooting, but I'm not sure what I did to fix it
-- also, it does notify every 30 seconds even though I have no new notifications. that one I haven't figured out yet
It does work as advertised though, despite the bugs I can't fix. It will either light up my edge lighting or the notch around the camera (which I prefer). so props to the dev for figuring that part out and here's to hoping the rest of the bugs get worked on the S10 (and my S10+). it seems to be working for other devices (I originally found it here for the oneplus)
Click to expand...
Click to collapse
you need to disable edge lighting in setting to use this app or else it will conflict since this app does wake up the screen while edge lighting is not.
if u enable both that mean this app waking up the screen, then edge lighting will also showing (coz edge lighting while screen is on is applied). you will have both notification then
psy07 said:
you need to disable edge lighting in setting to use this app or else it will conflict since this app does wake up the screen while edge lighting is not.
if u enable both that mean this app waking up the screen, then edge lighting will also showing (coz edge lighting while screen is on is applied). you will have both notification then
Click to expand...
Click to collapse
thanks! Not sure if it was changing that setting that helped, or their recent update I got yesterday, but the weird behavior has seemed to subside for a bit... I'll give it a few more days of testing to see if I can find anything else weird, but so far so good. I might also try swapping out the default color with individual colors for each app soon. Glad the dev seems to be open and receptive to feedback and willing to keep his app updated to fix various bugs found
The Reminder Notification Option
Has anyone successfully gotten the reminder option to work? When used, this is supposed to repeat the notification lighting for a brief period, if a notification had been unanswered for a period of time (30 or 60 seconds - I think). However, I could not get that to work - or at least replay the lighting. incidentally, I notice that Sakitech did not "fully" demo this feature in his Youtube tutorial. He mentioned it (at about 6:08), but did not show it working, I suspect (only speculating...) that he edited it out of the video because it does not work properly.
If anyone has the right settings for **** please share.
DetoxVenom said:
If anyone has the right settings for **** please share.
Click to expand...
Click to collapse
Did you whatch the video in the OP? It's sorta thorough.
Sent from my SM-G975W using XDA Labs
View attachment 4734017
cmexec said:
Has anyone successfully gotten the reminder option to work? When used, this is supposed to repeat the notification lighting for a brief period, if a notification had been unanswered for a period of time (30 or 60 seconds - I think). However, I could not get that to work - or at least replay the lighting. incidentally, I notice that Sakitech did not "fully" demo this feature in his Youtube tutorial. He mentioned it (at about 6:08), but did not show it working, I suspect (only speculating...) that he edited it out of the video because it does not work properly.
Click to expand...
Click to collapse
Use these settings and save.
rogerandgina said:
View attachment 4734017
Use these settings and save.
Click to expand...
Click to collapse
Thanks! The only setting I have differently is "double top to close" instead of "swipe up to close". Otherwise, I have been using these exact settings . As usual, at the moment that the screen should display the reminder, all that happens is the phone vibrates, but the light is not illuminated or display any visible interaction with the AOE lighting app.
cmexec said:
Thanks! The only setting I have differently is "double top to close" instead of "swipe up to close". Otherwise, I have been using these exact settings . As usual, at the moment that the screen should display the reminder, all that happens is the phone vibrates, but the light is not illuminated or display any visible interaction with the AOE lighting app.
Click to expand...
Click to collapse
Yeah, I see what you mean. My app as well will not work properly. I don't know what is going on? I have reached out to the developer and still not able to resolve the issues. The app starts out good but then goes rogue after awhile. I thought it was good lock messing it up but I was wrong. I give up for now.
cmexec said:
Thanks! The only setting I have differently is "double top to close" instead of "swipe up to close". Otherwise, I have been using these exact settings . As usual, at the moment that the screen should display the reminder, all that happens is the phone vibrates, but the light is not illuminated or display any visible interaction with the AOE lighting app.
Click to expand...
Click to collapse
Try turning off the "Manually only when I want it, I open the app". Also change the "When a notification comes" "And screen is off" to "Always off or on". Be sure you have turned off the Edge lighting in your phone settings.
What I was finding is when a notification would come in, it would light up the screen for a second and this would cause the app not to show the notification because I set it to "And screen is off" condition causing several notifications, if not all, to make the app not work. Once I changed to it to either/or, it has been working great for me. Hope this helps