Soft Brick -> Stock Firmware -> TWRP -> Custom ROM -> Bootloop - Moto G Q&A, Help & Troubleshooting

Hey, so i formatted the boot partition by accident today and could not boot anymore.
I was on a 5.1.1 Custom ROM before that. So i googled a bit and found a fix by flashing the Stock Firmware. Downloaded a 4.4.4 Stock Firmware here (RETAIL-DE) and flashed it using the commands here (as described in 3b). The second command failed with "Preflash validation failed". I believe thats because i had bootloader version 4.1.19 already and its not possible to flash an older one over that.
After that i could boot the phone again into the Stock Android 4.4.4. So i wanted to go back to an Lollipop or Marshmallow ROM. Using fastboot i flashed the latest TWRP Recovery and used it to flash a Custom ROM. I've tried several ROMs but every ROM results in an bootloop. Also tried using TWRP 2.6.0.0 and 2.7.0.0, but it didnt change sth.
I hope someone can help me solving this issue. Thanks.

You should probably full-flash the latest original Motorola firmware (GPE 5.1 or stock 5.0.2) before putting TWRP and custom roms based on Android L or M.

Related

Cant update Android..

I have a rooted Moto G phone. It is android 4.3 , I cant update it to 4.4.2 Kitkat for some reason.
I saved Kitkat to the SD Card, loaded into Recovery mode on the MOTO, then tried to install Android 4.4.2 from the .zip file
saved on the SD card in my phone.
I cant get this to work and i tried to install CARBON ROM the same way with out any results.. it says ERROR and fails to install.
Any help would be greatly appreciated.
ALSO does android need to be updated to 4.4.2 to install CARBON ROM?
Thanks
I don't know but maybe can help...
I could update successfully to last minor 176.44.1 update only after flashing stock recovery.img from my exact stock ROM.
after rooting process on KitKat motoG my recovery was modified, restoring the stock one worked for me. I just updated ota normally in WiFi without problems.
after that I flashed cwm recovery.
I restored to stock recovery and removed root. After that applied KitKat OTA, then flashed custom recovery and re-rooted.
Sent from my Moto G using Tapatalk
this involve wiping of all data and a factory reset, so first try just restoring the stock recovery.
If not working make a good backup first.
If the phone is rooted, OTA updates do not work afaik...
gymfreak81 said:
ALSO does android need to be updated to 4.4.2 to install CARBON ROM?
Thanks
Click to expand...
Click to collapse
Flashing a ROM overwrites system partition completely. You could have android version 1 running and still just flash another ROM

[Q] Custom ROMs won't boot

Hey guys, I've seen this issue before yet I've tried everything in a few threads now but have no idea what is happening,I have tried using search function yet no solution has fixed my problem.
Problem:
When installing custom ROMs the installation goes fine. I put the ROM on the sdcard, follow instructions for flashing e.g wipe data/cache etc and then flash GAPPS. However I get stuck on the boot logo of every ROM. I've tried both TWRP and CWM recoveries, both with no luck. Also tried not flashing GAPPS and just trying to flash the ROM to no avail.
Current state of phone:
The phone is currently running stock firmware via downloading factory image and flashing in boot-loader : stock boot, recovery, system image etc
The phone works fine when rooted on stock firmware. E.g no custom rom yet rooted.
Could really do with some help guys, any ideas?
muqy said:
Hey guys, I've seen this issue before yet I've tried everything in a few threads now but have no idea what is happening,I have tried using search function yet no solution has fixed my problem.
Problem:
When installing custom ROMs the installation goes fine. I put the ROM on the sdcard, follow instructions for flashing e.g wipe data/cache etc and then flash GAPPS. However I get stuck on the boot logo of every ROM. I've tried both TWRP and CWM recoveries, both with no luck. Also tried not flashing GAPPS and just trying to flash the ROM to no avail.
Current state of phone:
The phone is currently running stock firmware via downloading factory image and flashing in boot-loader : stock boot, recovery, system image etc
The phone works fine when rooted on stock firmware. E.g no custom rom yet rooted.
Could really do with some help guys, any ideas?
Click to expand...
Click to collapse
same problem simple solution another user informed me of.
simply donwgrade to 4.3 JB stock rom through fastboot. Then you are able to flash a custm rom from the 4.3 stock rom.
Its crazy i have to do this but it worked for me, now im running the xperience rom which is a rom based on 4.4.2 kk.
the 4.3 android stock firmwares are linked somewhere in the FAQ's as well as the guide to ffastboot lash it.
peace.
chairsz said:
same problem simple solution another user informed me of.
simply donwgrade to 4.3 JB stock rom through fastboot. Then you are able to flash a custm rom from the 4.3 stock rom.
Its crazy i have to do this but it worked for me, now im running the xperience rom which is a rom based on 4.4.2 kk.
the 4.3 android stock firmwares are linked somewhere in the FAQ's as well as the guide to ffastboot lash it.
peace.
Click to expand...
Click to collapse
Hey man, worked a charm thanks!
For users who may have the same problem:
After flashing 4.3 onto the device it did NOT boot.
- However I then went into the bootloader flashed custom recovery, I used cwm.
- Then I went into recovery, used adb to push the rom and gapps onto sdcard
- Full wipe and then installed rom. Then installed gapps
Working fine.
Cheers chairsz :good::good:

"error executing updater binary in zip" please help <3

So I've had a chinese version of the opo since last summer, first thing I did was root it and unlock bootloader etc. I've been running a rom for quite a while (really embarrassing, but can't remember what rom). And I tried to flash a new one, but I got greeted with the message "error executing updater binary in zip". I've tried most things, updating firmware, updating to latest recovery, wiped everything, then trying to install, then rebooting and trying again, but no luck. Running CM12 nightlies work, so does oxygenos, however they're not that good tbh. Would love any help
Roxkyp said:
So I've had a chinese version of the opo since last summer, first thing I did was root it and unlock bootloader etc. I've been running a rom for quite a while (really embarrassing, but can't remember what rom). And I tried to flash a new one, but I got greeted with the message "error executing updater binary in zip". I've tried most things, updating firmware, updating to latest recovery, wiped everything, then trying to install, then rebooting and trying again, but no luck. Running CM12 nightlies work, so does oxygenos, however they're not that good tbh. Would love any help
Click to expand...
Click to collapse
Flash latest CM12.1 nightly first
And then flash your desired ROM
Or else
Flash factory images of latest version Cyanogen OS 12.1 and then flash TWRP and then your desired ROM
Guide to flash ROMs and factory images >> http://forum.xda-developers.com/oneplus-one/general/guides-bacon-timmaaas-how-to-guides-t2839471
Mr hOaX said:
Flash latest CM12.1 nightly first
And then flash your desired ROM
Or else
Flash factory images of latest version Cyanogen OS 12.1 and then flash TWRP and then your desired ROM
Guide to flash ROMs and factory images >> http://forum.xda-developers.com/oneplus-one/general/guides-bacon-timmaaas-how-to-guides-t2839471
Click to expand...
Click to collapse
Unfortunately these methods did not work for me, I can get on 12.1, but when I want to flash something else (resurection rom in this case) I get the error.
Its a firmware issue you need the correct firmware

Unable to get OTA Updates installed on TWRP - Need to go back to stock recovery

Hi All,
Background:
Installed TWRP recovery to downgrade to KitKat from Android ver 5.0.2 / COS 12.0 YNg1TAS17L
( I guess the changes in lollipop made me to do so).
But after installing TWRP, for some reason or other I did nothing and now the issue is the OTA are not getting installed. From other similar thread I know that we can download the OTA zip and install through TWRP and I am not looking to get into that...as I am giving this device to my family.
Help Required:
1) Is there a way to uninstall TWRP and go back to stock recovery without losing any data?
( Is it as simple as flashing recovery image from the Stock ROM?)
2) Using the OnePlus tool kit can we flash the stock ROM which will also restore the stock recovery?
(If so is it possible to flash the latest ROM 5.1.1 or CM12.1)
I just need guidance here with steps on what will be the best and safe approach without frying up my device.
Please suggest
droidfry said:
Hi All,
Background:
Installed TWRP recovery to downgrade to KitKat from Android ver 5.0.2 / COS 12.0 YNg1TAS17L
( I guess the changes in lollipop made me to do so).
But after installing TWRP, for some reason or other I did nothing and now the issue is the OTA are not getting installed. From other similar thread I know that we can download the OTA zip and install through TWRP and I am not looking to get into that...as I am giving this device to my family.
Help Required:
1) Is there a way to uninstall TWRP and go back to stock recovery without losing any data?
( Is it as simple as flashing recovery image from the Stock ROM?)
2) Using the OnePlus tool kit can we flash the stock ROM which will also restore the stock recovery?
(If so is it possible to flash the latest ROM 5.1.1 or CM12.1)
I just need guidance here with steps on what will be the best and safe approach without frying up my device.
Please suggest
Click to expand...
Click to collapse
Numerous other threads on the same subject... I don't understand why you are not ready to flash the OTA through TWRP but you are through stock recovery... It's the same thing... Don't use toolkit, they are the ones, in 99% of the cases, that "fry" your phone... As soon as TWRP is installed no OTA will automatically, you will have to flash them manually.

Upgrading Honor 4C to Marshmallow

Hi Currently I am having Honor 4c with Kitkat 4.4.2 (V100R001C636B160) version I wanted to Upgrade my android version to Marshmallow(CHM-U01C432B560) or any other custom ROM. I have unlocked my device bootloader and installed CWM recovery following the guide https://forum.xda-developers.com/honor-4c/development/honor-4c-root-cwm-recovery-inshaalmirza-t3177770 was able to install CWM but I wanted to install TWRP and followed the guide by @HassanMirza01 but wasnt success to install TWRP , if I am trying to flash Marshmallow ROM using CWM or by flashing IMG files using ADB I am not able to do it. Every Time I try to flash a ROM from CWM I am getting error and while flashing IMG files using ADB the screen is being struck at boot logo.Can anyone guide me how to replace CWM with TWRP so that I can Install Marshmallow (every time while I am trying to flash TWRP it is being struck at boot logo and had to flash stock ROM to recover the phone) and install marshmallow.
Note: Initially I upgraded to Lollipop as the version was not stable and Buggy I reverted to stock version using the official guide.
miststudent2011 said:
Hi Currently I am having Honor 4c with Kitkat 4.4.2 (V100R001C636B160) version I wanted to Upgrade my android version to Marshmallow(CHM-U01C432B560) or any other custom ROM. I have unlocked my device bootloader and installed CWM recovery following the guide https://forum.xda-developers.com/honor-4c/development/honor-4c-root-cwm-recovery-inshaalmirza-t3177770 was able to install CWM but I wanted to install TWRP and followed the guide by @HassanMirza01 but wasnt success to install TWRP , if I am trying to flash Marshmallow ROM using CWM or by flashing IMG files using ADB I am not able to do it. Every Time I try to flash a ROM from CWM I am getting error and while flashing IMG files using ADB the screen is being struck at boot logo.Can anyone guide me how to replace CWM with TWRP so that I can Install Marshmallow (every time while I am trying to flash TWRP it is being struck at boot logo and had to flash stock ROM to recover the phone) and install marshmallow.
Note: Initially I upgraded to Lollipop as the version was not stable and Buggy I reverted to stock version using the official guide.
Click to expand...
Click to collapse
You can try this TWRP https://forum.xda-developers.com/honor-4c/development/recovery-twrp-3-0-0-0-huawei-honor-4c-t3349495 or some version of TWRP for honor 4x or p8lite. And then you can try to flash stock firmare using this tutorial https://forum.xda-developers.com/honor-4x/how-to/install-emui-4-1-4x-4c-g-play-g-play-t3515702. You might need to be in lollipop or marshmallow to use it.
Hi @keikari thanks for the reply, that is the case where I am facing the problem Neither I can install Twrp 3.0.1-0 (r1,2,3,4) variants nor lollipop or marshmallow update .I am struck with stock Rom tried more than 15 to 20 times . Can you provide any alternative solutions.
miststudent2011 said:
Hi @keikari thanks for the reply, that is the case where I am facing the problem Neither I can install Twrp 3.0.1-0 (r1,2,3,4) variants nor lollipop or marshmallow update .I am struck with stock Rom tried more than 15 to 20 times . Can you provide any alternative solutions.
Click to expand...
Click to collapse
What error did fastboot gave you when you tried to flash TWRP?
No error given but after flashing twrp device is struck at boot screen and can't move to next screen cwm flashing works fine .
Is it mandatory to have lollipop or marshmallow update to flash twrp?
miststudent2011 said:
No error given but after flashing twrp device is struck at boot screen and can't move to next screen cwm flashing works fine .
Is it mandatory to have lollipop or marshmallow update to flash twrp?
Click to expand...
Click to collapse
I don't know how things really work or why they need stuff to work. But in TWRP thread it says for android 5.1.1 - 6.0. So I guess it's important to have some of those versions.
Is there any other way to flash lollipop or marshmallow from cwm? I even extracted update.app and flashed recovery, system , boot images individually but it also doesn't work struck at boot screen. Can I fully wipe system files from phone and re-flash lollipop or marshmallow update. Similar to full format of a PC.
miststudent2011 said:
Is there any other way to flash lollipop or marshmallow from cwm? I even extracted update.app and flashed recovery, system , boot images individually but it also doesn't work struck at boot screen. Can I fully wipe system files from phone and re-flash lollipop or marshmallow update.
Click to expand...
Click to collapse
No idea will that work, but one thing that comes to mind is to flash those images you did and then put UPDATE.APP in your sd card in folder named dload and do force upgrade ( power + vol up + vol down ).
keikari said:
No idea will that work, but one thing that comes to mind is to flash those images you did and then put UPDATE.APP in your sd card in folder named dload and do force upgrade ( power + vol up + vol down ).
Click to expand...
Click to collapse
Tried that too but no success. I think the problem occurred while downgrading to kitkat from lollipop maybe it corrupted the boot system. Even that is the case while flashing and wiping cache so many times it might have showed error in any of the instances but it didn't. Can't find out what actually preventing system to update.

Categories

Resources