Database Info

Android model name chagall

Tegra 3 processor at 1.5 GHz in my hand the tablets have 1 gb ram 16 gb. Update the settings when I get the error failed to connect to server.

preagx said:
Tegra 3 processor at 1.5 GHz in my hand the tablets have 1 gb ram 16 gb. Update the settings when I get the error failed to connect to server.
Click to expand...
Click to collapse
Hola estopy buscando toda la informacion concerniente a esta tabla, la situacion es que en mi pais se comercializa con mucho exito bajo el nombre de 4N de la marca Siragon, y no tengo en lo absoluto la idea de como rootearla o instalar un CWM, la tabla tiene mucho potencial pero la verdad es que la rom que trae esta bastante incompleta. Por el momento lo unico que se es que comparte el mismo fabricante con P1 Chagall y Pegatron Chagall, en mi pais (Venezuela) es la Siragon 4N (TB-90103G), cualqyuier info PLISSSSSSS haganlo saber

hadez2021 said:
Hola estopy buscando toda la informacion concerniente a esta tabla, la situacion es que en mi pais se comercializa con mucho exito bajo el nombre de 4N de la marca Siragon, y no tengo en lo absoluto la idea de como rootearla o instalar un CWM, la tabla tiene mucho potencial pero la verdad es que la rom que trae esta bastante incompleta. Por el momento lo unico que se es que comparte el mismo fabricante con P1 Chagall y Pegatron Chagall, en mi pais (Venezuela) es la Siragon 4N (TB-90103G), cualqyuier info PLISSSSSSS haganlo saber
Click to expand...
Click to collapse
Please read the rules about posting in English only.
MikeChannon said:
4. Use the English language.
We understand that with all the different nationalities not everyone speaks English well, but please try. If you're really unable to post in English use an online translator, You're free to include your original message in your own language below the English translation.
Click to expand...
Click to collapse
Velcro. What a rip off!

KidCarter93 said:
Please read the rules about posting in English only.
Velcro. What a rip off!
Click to expand...
Click to collapse
Uppppsss sorry :crying:
I'm trying to collect all the information in this table, in my country is sold as Síragon 4N, the software is very raw and I try to find a way to get super user permissions, if you can help me I will be really grateful

hadez2021 said:
Uppppsss sorry :crying:
I'm trying to collect all the information in this table, in my country is sold as Síragon 4N, the software is very raw and I try to find a way to get super user permissions, if you can help me I will be really grateful
Click to expand...
Click to collapse
Wait, is that tablet what you'd get as a retail version? It looks more of a prototype to me. And its a tegra 3 running honeycomb, not ICS or JB
Sent from my XT615 using xda premium

Justice™ said:
Wait, is that tablet what you'd get as a retail version? It looks more of a prototype to me. And its a tegra 3 running honeycomb, not ICS or JB
Sent from my XT615 using xda premium
Click to expand...
Click to collapse
Yup is a retail and have ICS 4.0.3 inside, i need a way to get root access, PLEASE if somebody have some info....give it to us PLEASEEEE

hadez2021 said:
Yup is a retail and have ICS 4.0.3 inside, i need a way to get root access, PLEASE if somebody have some info....give it to us PLEASEEEE
Click to expand...
Click to collapse
For root try this its work for me http://www.multiupload.nl/HOS4JQ8AMR

Does anyone found where to grab firmware?

official pegatron fw found in static link anyone feel free plz help one tiny bit too!
SionGrey said:
Does anyone found where to grab firmware?
Click to expand...
Click to collapse
i found the official fw and for rooting just use unlockroot 1click works in 10 sec
Plz someone i need to deblob it namwe is exact but can't decrypt from sd..plzzz i hate encryptions I'll get you a sixpack of beer.
Oh yhe reason im in a hurry is the 110 error cant install anything (edit)

Hello, I also have the same tablet siragon 4N, in my case has Android 4.1.1 JB and desire to get a Cyanogen ROM or any other Android KitKat preferably stable.
I have understood that it is the same Fujitsu M532 tablet and Pegatron Chagall

my razr hd xt925 root went wrong, please help

I just got my razr hd'm from mexico with telcel buy it, and the root went well, but when I was installing my previous applications, this gave me an error (the worst is not that aplicasion had the conlicto) and disappeared digital buttons and notiicaciones bar, the touch seems to respond well, as did factory reset and still the same, sometimes even freezes,
I am new to this forum, and wonder if anyone of you have your razr mexico hd telcel and could share me your firmware to restore my teleono I will be very grateful
greetings!
*************
Acabo de adquirir mi razr hd soy de mexico lo compre con telcel, y el root salio bien, pero cuando estaba instalando mis aplicaciones anteriores, este me dio un error (lo peor es que no se con que aplicasion tuvo el conflicto) y desaparecieron los botones digitales y la barra de notificaciones, el touch parece responder bien, ya hice factory reset y sigue igual, incluso en ocasiones se queda congelado,
soy nuevo en este foro, e pregunto si hay alguien de mexico que tenga su razr hd en telcel y que pudiera compartirme su firmware para restaurar mi teleono les estare muy agradecido
saludos!!!

Sorry, can't help you at the moment, but this shouldn't be posted in development... Hopefully someone will come along and figure this out for you.

any news about this, I'm interested in this situation, thanks!!! cheers.
Luis

i have same problem

Are you on ICS or Jelly Bean ?
If you are in ICS...
Download RSD Lite... https://hotfile.com/dl/174582400/60ad26d/RSDLite_6.0.rar.html
Download this roms : http://sbf.droid-developers.org/van...UISHTELMXLA_P046_A060_CFC_fastboot_v2.xml.zip
Go to fastboot ... Power + vol down when you start your phone !
Flash !
You don't need a unlocked bootloader !

XT925 bricked! Need help

Hey Guys,
So I got a very weird situation here, I have my XT925 from Telcel. Several months ago I unlocked the bootloader and started playing around with ROMs. All of them worked fine.
A couple of days ago I flashed the SFR ROM: SFR Vodafone France Version: 9.8.0Q-97-XT925_VQU-18 FULL.
The flash went fine I loaded the 4.1.1 JB and immediately got the OTA alert. Since I had already tested and succeded doing OTA with unlocked BL. I said fine let's do it. It downloaded the 50 MB or so. Restarted to the default recovery, since this was a brand new flash, no CWM yet. Started upgrading and at the middle of the whole thing disaster occured!
The phone restarted and it couldn't get pass the fastboot. I get "update gpt_main version failed" and "failed to hab check for gpt_backup: 0x35"
The weirdest thing of it all is that now the fastboot claims that my bootloader is locked! It went magically after trying to OTA from UNLOCKED to LOCKED!
So this is what's really killing me, I've tried flashing all different versions of Stock ROMs, all via RSD Lite 6.1.4. They all come back with error. I tried removing not only the getvar line but also the 2nd and 3rd line after it but nothing.
And one more thing I said if the device is suddenly locked why not trying to unlock it again, and the weird thing is that if I request the "get_unlock_data" via fastboot it will come back with "Could not get unlock data!"
So I'm completely lost! What can I do know????
Any help will be appreciated!

Flashes retail brasil. Me paso lo mismo. Hice lo mismo y me paso lo mismo. Flash la última retail brasil y se soluciona.
No hablo ingles. Perdón jaja
Enviado desde mi XT925 usando Tapatalk 2

Gracias!
Juanpa123 said:
Flashes retail brasil. Me paso lo mismo. Hice lo mismo y me paso lo mismo. Flash la última retail brasil y se soluciona.
No hablo ingles. Perdón jaja
Enviado desde mi XT925 usando Tapatalk 2
Click to expand...
Click to collapse
Gracias Juanpa!
Una pregunta, a ti también te paso que se bloqueó el bootloader al intentar actualizar la version SFR? Eso es lo mas raro que me pasó a mi. Antes del problema habia desbloqueado el bootloader y probado varias ROMs hasta la CM 10.1 y siempre me dejó hacerlo bien porque al encender me aparecía UNLOCKED el bootloader.
Ah y le borraste algo especial al XML de la ultima retail de la ROM de Brasil? O solo la linea getvar? Y que paso con tu bootloader una vez que reviviste el telefono? Te volvio a aparecer como UNLOCKED o como LOCKED?
Gracias!!

adolfovm said:
Gracias Juanpa!
Una pregunta, a ti también te paso que se bloqueó el bootloader al intentar actualizar la version SFR? Eso es lo mas raro que me pasó a mi. Antes del problema habia desbloqueado el bootloader y probado varias ROMs hasta la CM 10.1 y siempre me dejó hacerlo bien porque al encender me aparecía UNLOCKED el bootloader.
Ah y le borraste algo especial al XML de la ultima retail de la ROM de Brasil? O solo la linea getvar? Y que paso con tu bootloader una vez que reviviste el telefono? Te volvio a aparecer como UNLOCKED o como LOCKED?
Gracias!!
Click to expand...
Click to collapse
Si si. Yo tmb había probado un montón y cuando instale de nuevo a 4.1.1 y actualice por ota lo bloqueo al boot.
Flashea por fastboot la última retail brasil y ami me lo soluciono de una. Para mi es porq no te deja hacer dowgrade a ninguna versión por el boot bloqueado y Tmp usar un software q no sea latam. Proba con cualquiera q tenga un kernel más nuevo. Lo mejor si es totalmente nuevo. Y si me aparece la palabra un lock y ya probé distintos rom de nuevo
Saludos
Enviado desde mi XT925 usando Tapatalk 2

Juanpa123 said:
Si si. Yo tmb había probado un montón y cuando instale de nuevo a 4.1.1 y actualice por ota lo bloqueo al boot.
Flashea por fastboot la última retail brasil y ami me lo soluciono de una. Para mi es porq no te deja hacer dowgrade a ninguna versión por el boot bloqueado y Tmp usar un software q no sea latam. Proba con cualquiera q tenga un kernel más nuevo. Lo mejor si es totalmente nuevo. Y si me aparece la palabra un lock y ya probé distintos rom de nuevo
Saludos
Enviado desde mi XT925 usando Tapatalk 2
Click to expand...
Click to collapse
Wow! Ya lo probé y listo, mi Razr HD ha revivido!!! :victory:
Gracias por el apoyo Juanpa!!!! Me había quedado tan impresionado con el locked en el bootloader que pensé estaba perdido! Tan fácil que era como descargar la versión mas reciente para que funcionara! No sabes cuantas versiones probé y nada... pero ahora que lo pienso todas las que probé eran más viejas que el OTA, seguramente se quedo a medias el upgrade y ya no iba a tomar ninguna excepto la más nueva!
De nuevo mil gracias! Eres un master!

SOLVED! Quick summary
Here's a quick summary for you non spanish readers!
So it seems that during the OTA the upgrade failed and due to this my bootloader appeared as LOCKED. So this meant that I had to treat my RAZR HD as locked, and flash a newer full version.
So I downloaded the latest Retail BR as suggested by juanpa123, thanks again man!
With the latest retail BR zip and RSD Lite 6.1.4 at hand I removed the "getvar" line from the XML, flashed and boom! Retail version flashed without issues! :victory:
Also once restored I went back into fastboot and my bootloader is again showing up as UNLOCKED. I already reflashed CWM through fastboot just fine!

Same problem... no solution.
Hi there! I came to this post after facing the same issue you guys described. My phone is locked in fastboot screen, showing that the device is locked. I've downloaded the latest firmware from Brasil (Vivo) and tried to flash it using RSD 6.1.4, but it is showing the following error on the screen:
downgraded security version
update gpt_main version failed
preflash validation failed for GPT
... aaaaand, I'm stuck at this point. Apparently I've downloaded the correct version of the firmware for my XT925, but it simply doesn't flash! Any ideas of what I could do?
I'd appreciate any kind of help.
Thanks in advance! :fingers-crossed:

Hey playmolego,
So I can see you have the same issue I had. The problem is you tried to OTA, so now your phone base version is the OTA one, not the latest Brasil vivo one. My advice to you is to download the latest one you can find from the LATAM region. Wether it's Mexico, Brazil or other and hope it's the same or newer as the OTA that failed.
By the way the Vivo you tried to flash failed because it's older than the OTA that failed, therefore it's considered a downgrade, which a locked bootloader will not allow.
So a newer or same version is a must.
Give the Retail Brasil a try:
Branding: Retail Brasil
Version: 9.8.2Q-50-XT925_VQLM-21 FULL
From the Jelly Bean Firmwares thread.
Hopefully you'll find one. Best of luck!

A small improvement
Hey there! Thanks!
I noticed my lazy attempt while re-reading the topic... tee-hee. So I downloaded the correct version (4.1.2 - JB) for Brasil Vivo... and at this moment, I am desperately waiting for RSD to finish the flashing process, but it it stuck for more than one hour on 17/19 flash cdrom "cdrom_signed". The other phases didn't take this long, so I am getting a little bit concerned about what might happen... Any clues on why is it taking soooo long? :T What else could I do?
Thanks in advance!
adolfovm said:
Hey playmolego,
So I can see you have the same issue I had. The problem is you tried to OTA, so now your phone base version is the OTA one, not the latest Brasil Vivo one (9.8.2Q-50-XT925_VQLM-21 FULL). My advice to you is to download the latest one you can find from the LATAM region. Wether it's Mexico, Brazil or other and hope it's the same or newer as the OTA that failed.
By the way the Vivo you tried to flash failed because it's older than the OTA that failed, therefore it's considered a downgrade, which a locked bootloader will not allow.
So a newer or same version is a must.
Give the Retail Brasil a try:
Branding: Retail Brasil
Version: 9.8.2Q-50-XT925_VQLM-21 FULL
From the Jelly Bean Firmwares thread.
Hopefully you'll find one. Best of luck!
Click to expand...
Click to collapse

That's a lot of time indeed!
You could leave it some more time to see if it finishes. I'm not sure what could happen if you force restart the phone. In the meantime I recommend you to download the latest Jelly Bean "Brazil Retail" the one I mentioned on my previous post. It's a bit newer than the Vivo one and it might flash better if the Vivo fails.
playmolego said:
Hey there! Thanks!
I noticed my lazy attempt while re-reading the topic... tee-hee. So I downloaded the correct version (4.1.2 - JB) for Brasil Vivo... and at this moment, I am desperately waiting for RSD to finish the flashing process, but it it stuck for more than one hour on 17/19 flash cdrom "cdrom_signed". The other phases didn't take this long, so I am getting a little bit concerned about what might happen... Any clues on why is it taking soooo long? :T What else could I do?
Thanks in advance!
Click to expand...
Click to collapse

SOLVED!
So... I held my breath and unplugged the device after 2 hours stuck in the same stage. The phone rebooted and... ta-da! It was healthy again, running the OEM 4.1.2 JB from my carrier. :good:
Maybe it was luck... but at least I've got my Razr HD back (well, to sell it... actually... tee-hee).
Thanks for all the help!

Hi.
I have the same issue, let me tell you my history:
Motorola RAZR HD XT925 Telcel
it was bootloader locked, I unlocked from the Motorola website with the code that it was shown, so it is was bootloader unlocked.
I installed the lastest OEM JB from Brazil, it was working fine, it restarted and I had to configure it again, but suddenly there was an update message so I downloaded it, it rebooted and locked the bootloader again.
I cannot access to the Fastboot menu, normal mode, recovery, and all the menu that appears when the three botton reboot is done.
It says that Device is LOCKED, again, it was unlocked before I installed the brazilian firmware, after OTA update, it was locked again.
I have tried to unlock again the bootloader with the same tool, Motorola ha... 4.0 I do not remember the name exactly.
Batery OK
but the message appears
downgraded security version
update gpt_main version failed
Failed to hab check for gpt_backup
failed to load gpt
CDI Read failure
Fastboot reason Invalid GPT
I have tried to install again the last firmware from Brazil, it was not successful
Also tried to install America Movil 4.1.2, does not work
I am not able to do anything right now.
Does anyone have any idea what should I do?
Thanks!

Hi, so yes your case is the same as ours. The only problem I can see is that you had already flashed the latest JB version available on the Pzyduck thread. The problem with this is that it's obvious that the OTA you downloaded and tried to flash is newer than the newest version on the Jelly Bean thread.
So this means that all the versions available on that thread are older than the OTA that failed, so you won't be able to flash them properly. Your only option is to flash the full version that corresponded to your OTA. Unfortunately I don't know were you can get this. Maybe you can try to contact "Pzyduck" from the JB Firmware threads. He could be of help with a newer version that could work for you.
Another chance is to flash one of the newer european versions, the ones that are V26 or V27 from the thread though I'm unsure if those will flash on a "locked" bootloader from LATAM.
djzothka said:
Hi.
I have the same issue, let me tell you my history:
Motorola RAZR HD XT925 Telcel
it was bootloader locked, I unlocked from the Motorola website with the code that it was shown, so it is was bootloader unlocked.
I installed the lastest OEM JB from Brazil, it was working fine, it restarted and I had to configure it again, but suddenly there was an update message so I downloaded it, it rebooted and locked the bootloader again.
I cannot access to the Fastboot menu, normal mode, recovery, and all the menu that appears when the three botton reboot is done.
It says that Device is LOCKED, again, it was unlocked before I installed the brazilian firmware, after OTA update, it was locked again.
I have tried to unlock again the bootloader with the same tool, Motorola ha... 4.0 I do not remember the name exactly.
Batery OK
but the message appears
downgraded security version
update gpt_main version failed
Failed to hab check for gpt_backup
failed to load gpt
CDI Read failure
Fastboot reason Invalid GPT
I have tried to install again the last firmware from Brazil, it was not successful
Also tried to install America Movil 4.1.2, does not work
I am not able to do anything right now.
Does anyone have any idea what should I do?
Thanks!
Click to expand...
Click to collapse

Have you found any solution ?
Same issue here, been searching and trying for solutions. No luck so far...
Did ya have any progress???
djzothka said:
Hi.
I have the same issue, let me tell you my history:
Motorola RAZR HD XT925 Telcel
it was bootloader locked, I unlocked from the Motorola website with the code that it was shown, so it is was bootloader unlocked.
I installed the lastest OEM JB from Brazil, it was working fine, it restarted and I had to configure it again, but suddenly there was an update message so I downloaded it, it rebooted and locked the bootloader again.
I cannot access to the Fastboot menu, normal mode, recovery, and all the menu that appears when the three botton reboot is done.
It says that Device is LOCKED, again, it was unlocked before I installed the brazilian firmware, after OTA update, it was locked again.
I have tried to unlock again the bootloader with the same tool, Motorola ha... 4.0 I do not remember the name exactly.
Batery OK
but the message appears
downgraded security version
update gpt_main version failed
Failed to hab check for gpt_backup
failed to load gpt
CDI Read failure
Fastboot reason Invalid GPT
I have tried to install again the last firmware from Brazil, it was not successful
Also tried to install America Movil 4.1.2, does not work
I am not able to do anything right now.
Does anyone have any idea what should I do?
Thanks!
Click to expand...
Click to collapse

same problem here
I have the same problem here, i will try with this one
Claro Puerto Rico 9.8.2Q-50-XT925_VQLM-24_AmericaMovil_PR_SIGNED_S12_USAVANQUCLAPRLA020.0R_VANQJBCLAPRLA_P008_A010_S1FF_CFC_fb.xml.zip
Hope this works, this is the last one i can try... any other firmware is older than everthing i check...

Solved
hi, I just want to confirm that, i solved this problem flashing with this more recent firmware
Claro Puerto Rico 9.8.2Q-50-XT925_VQLM-24_AmericaMovil_PR_SIGNED_S12_USAVANQUCLAPRLA020.0 R_VANQJBCLAPRLA_P008_A010_S1FF_CFC_fb.xml.zip
If you have unlocked bootloader for nothing try an ota update.
---------- Post added at 06:53 AM ---------- Previous post was at 06:43 AM ----------
cha_niembro said:
Same issue here, been searching and trying for solutions. No luck so far...
Did ya have any progress???
Click to expand...
Click to collapse
Try this one
Claro Puerto Rico 9.8.2Q-50-XT925_VQLM-24_AmericaMovil_PR_SIGNED_S12_USAVANQUCLAPRLA020.0 R_VANQJBCLAPRLA_P008_A010_S1FF_CFC_fb.xml.zip
It worked for my HD, same problem. Regards!
You Can Download it from sbf.droid- developers org google it, XDA dont letme paste the link

I have the same problem, United States (Verizon), developer edition (xt926). There was an OTA about 4 days ago (11-5-2012) that has bricked my device. I'm looking for this new firmware, but it seems to be too new.
I can try going to Verizon, since they'd have access to the firmware, but what a nightmare.

it works for me flashing the CLARO PR firmware

Flashed KK OTA now bricked
Can't seem to find any .sbf newer or equal the 4.4.2 OTA that bricked my device.
Any hints?
I have the original OTA file for my region (Brazil) but I can't flash it with RSD lite. Anybody found rsd lite flashable for 4.4.2?
Thanks

ricpf said:
Can't seem to find any .sbf newer or equal the 4.4.2 OTA that bricked my device.
Any hints?
I have the original OTA file for my region (Brazil) but I can't flash it with RSD lite. Anybody found rsd lite flashable for 4.4.2?
Thanks
Click to expand...
Click to collapse
im in the same stage cant flash any firm due to 4.4.2 base, what does the RSD says? could you please share your OTA

Question Root on Moto G100?

Hello forum members, I recently purchased my MOTO G100 and I've already broken its warranty UNLOCKING BOOTLOADER XD, I would like to know how to install MAGISK on it, I saw that there is no TWRP for this model yet and I don't even know if there will ever be one day, finally, I would like to know if it is possible to ROOT it, thank you all.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

[Guide] Root Motorola with Magisk (UnLocked Bootloader)(Non-TWRP method)
Root Motorola Devices with Magisk Note: This method has been working with most Moto Devices that the Bootloader can be UnLocked. If the Bootloader cannot be Unlocked this method will not work. Please only use this as a reference. If you require...
forum.xda-developers.com

sd_shadow said:
[Guide] Root Motorola with Magisk (UnLocked Bootloader)(Non-TWRP method)
Root Motorola Devices with Magisk Note: This method has been working with most Moto Devices that the Bootloader can be UnLocked. If the Bootloader cannot be Unlocked this method will not work. Please only use this as a reference. If you require...
forum.xda-developers.com
Click to expand...
Click to collapse
Thanks, Work!!

Jota96 said:
Thanks, Work!!
View attachment 5366173
Click to expand...
Click to collapse
How did you find the correct boot.img to download?

Slowboytommy said:
How did you find the correct boot.img to download?
Click to expand...
Click to collapse
Use
Device Model #, Codename, and Software Channel

Slowboytommy said:
How did you find the correct boot.img to download?
Click to expand...
Click to collapse
The safest way is as follows I think...
Update your stock ROM to the newest one, and use LMSA.
Just specify your IMEI then LMSA will select and download the ROM for you.
And look for the ROM folder in the LMSA Download folder so that you can find the boot.img.

Hola gente como estan yo bajé e instale el programa de rescate de Motorola en Windows y ya estaba registrado en Motorola y bajé la ROM de ahi android 12. Descomprimi la ROM y encontré el archivo boot.img y con eso desbloquee el bootloader. Desde adb fastboot. Después trate de cargar el twrp le cambié el nombre al twrp a recovery y lo tomo con fastboot boot recovery.img pero no puedo ver las particiones ni el almacenamiento interno. Ese es mí problema. Después inicie el celular moto g100 e instale el magisk y listo. Pero el problema es el twrp.. Saludos a todos y si alguien tiene alguna solucion. Muchas Gracias

lualdi63 said:
Hola gente como estan yo bajé e instale el programa de rescate de Motorola en Windows y ya estaba registrado en Motorola y bajé la ROM de ahi android 12. Descomprimi la ROM y encontré el archivo boot.img y con eso desbloquee el bootloader. Desde adb fastboot. Después trate de cargar el twrp le cambié el nombre al twrp a recovery y lo tomo con fastboot boot recovery.img pero no puedo ver las particiones ni el almacenamiento interno. Ese es mí problema. Después inicie el celular moto g100 e instale el magisk y listo. Pero el problema es el twrp.. Saludos a todos y si alguien tiene alguna solucion. Muchas Gracias
Click to expand...
Click to collapse
Hello people, how are you? I downloaded and installed the Motorola rescue program in Windows and it was already registered in Motorola and I downloaded the ROM from there android 12. I unzipped the ROM and found the file boot.img and with that I unlocked the bootloader. From adb fastboot. Then try to load the twrp I renamed the twrp to recovery and take it with fastboot boot recovery.img but I can't see the partitions and internal storage. That's my problem. Then start the moto g100 cell phone and install the magisk and that's it. But the problem is the twrp... Greetings to all and if someone has a solution. Thank you so much
Sir, this is an English language forum. Please provide a translation next time.
TWRP isn't compatible with A12 for our device, you need to patch the boot.img manually in the magisk app and flash it in fastboot.

Beetle84 said:
Hola gente, como estan? Descargué e instalé el programa de rescate de Motorola en Windows y ya estaba registrado en Motorola y de allí descargué la ROM android 12. Descomprimí la ROM y encontré el archivo boot.img y con eso desbloqueé el bootloader. Desde adb fastboot. Luego intente cargar el twrp. Cambie el nombre del twrp a recovery y tómelo con fastboot boot recovery.img pero no puedo ver las particiones y el almacenamiento interno. Ese es mi problema. Luego encienda el celular moto g100 e instale el magisk y listo. Pero el problema es el twrp... Saludos a todos y si alguien tiene una solucion. muchas gracias
Señor, este es un foro en inglés. Proporcione una traducción la próxima vez.
TWRP no es compatible con A12 para nuestro dispositivo, debe parchear boot.img manualmente en la aplicación magisk y actualizarlo en fastboot.
Click to expand...
Click to collapse
Beetle84 said:
Hello people, how are you? I downloaded and installed the Motorola rescue program in Windows and it was already registered in Motorola and I downloaded the ROM from there android 12. I unzipped the ROM and found the file boot.img and with that I unlocked the bootloader. From adb fastboot. Then try to load the twrp I renamed the twrp to recovery and take it with fastboot boot recovery.img but I can't see the partitions and internal storage. That's my problem. Then start the moto g100 cell phone and install the magisk and that's it. But the problem is the twrp... Greetings to all and if someone has a solution. Thank you so much
Sir, this is an English language forum. Please provide a translation next time.
TWRP isn't compatible with A12 for our device, you need to patch the boot.img manually in the magisk app and flash it in fastboot.
Click to expand...
Click to collapse
well thanks for the information but i did that a while ago twrp in its version 3.5.2 starts from adb fastboot only it doesn't let you mount the partitions. I have already rooted a lot of devices and I know how to do it anyway thanks for the observation but as I said I already did it. I just wanted to see if anyone knew of any other solutions with twrp. Greetings to all members of the forums. and it would be advisable to use a translator from English to Spanish and from Spanish to English and there would be no problem. because here there must be people who are members who speak Spanish and speak English, so it is very simple to use a translator.

lualdi63 said:
well thanks for the information but i did that a while ago twrp in its version 3.5.2 starts from adb fastboot only it doesn't let you mount the partitions. I have already rooted a lot of devices and I know how to do it anyway thanks for the observation but as I said I already did it. I just wanted to see if anyone knew of any other solutions with twrp. Greetings to all members of the forums. and it would be advisable to use a translator from English to Spanish and from Spanish to English and there would be no problem. because here there must be people who are members who speak Spanish and speak English, so it is very simple to use a translator.
Click to expand...
Click to collapse
Yes, twrp doesnt let you mount the partitions or access data on A12... So you need to patch yourself. As for the translator, its up to the user to translate, not the site.

Beetle84 said:
Yes, twrp doesnt let you mount the partitions or access data on A12... So you need to patch yourself. As for the translator, its up to the user to translate, not the site.
Click to expand...
Click to collapse
ok thank you very much

Jota96 said:
Hola miembros del foro , recientemente compre mi MOTO G100 y ya rompí su garantía DESBLOQUEANDO BOOTLOADER XD, me gustaría saber cómo instalar MAGISK en él, vi que todavía no hay TWRP para este modelo y no lo sé aun se si algun dia habra, por ultimo me gustaria saber si es posible ROOTEARLO, gracias a todos.​​
Click to expand...
Click to collapse
Jota96 said:
Hello forum members, I recently purchased my MOTO G100 and I've already broken its warranty UNLOCKING BOOTLOADER XD, I would like to know how to install MAGISK on it, I saw that there is no TWRP for this model yet and I don't even know if there will ever be one day, finally, I would like to know if it is possible to ROOT it, thank you all.​​View attachment 5365181​
Click to expand...
Click to collapse
Thanks a lot

Jota96 said:
Hello forum members, I recently purchased my MOTO G100 and I've already broken its warranty UNLOCKING BOOTLOADER XD, I would like to know how to install MAGISK on it, I saw that there is no TWRP for this model yet and I don't even know if there will ever be one day, finally, I would like to know if it is possible to ROOT it, thank you all.​​View attachment 5365181​
Click to expand...
Click to collapse
Thanks a lot. thank you very much very good job

Sorry to revive an old thread, but installing Magisk on latest stock rom prevents touch from working

Kandroid#6386 said:
Sorry to revive an old thread, but installing Magisk on latest stock rom prevents touch from working
Click to expand...
Click to collapse
Usually that problem is caused from using an old boot.IMG
Try flashing the current available firmware from lsma and use that boot.IMG
[Guide] Root Motorola with Magisk (UnLocked Bootloader)(Non-TWRP method)
Root Motorola Devices with Magisk Note: This method has been working with most Moto Devices that the Bootloader can be UnLocked. If the Bootloader cannot be Unlocked this method will not work. Please only use this as a reference. If you require...
forum.xda-developers.com

sd_shadow said:
[Guide] Root Motorola with Magisk (UnLocked Bootloader)(Non-TWRP method)
Root Motorola Devices with Magisk Note: This method has been working with most Moto Devices that the Bootloader can be UnLocked. If the Bootloader cannot be Unlocked this method will not work. Please only use this as a reference. If you require...
forum.xda-developers.com
Click to expand...
Click to collapse
will I need to go through this process every time I update my stock rom device?
I have an edge s with a g100 stock rom

Redmi 9a black screen recovery

Hello, i need help. I try to install twrp and the phone now is bricked. No fastboot mode just go to recovery, that what show in adb devices. I can´t do anything because is in black screen.
Can anyone help me?
And sorry if im in wrong tread.
Thanks

It's resolved. I use adb shell to remove some files.
Thanks anyway,

Hello there, may i bother you time to teach me how to recover from your 9a bricked and just go black screen???
I already have this problem for almost 2 month and still can`t find the solution. Our difference was, i already install twrp and also already flash rom and suddenly its goes black.
Some simple solution that i read is, i drained dead my battery so need to charge it for a few hours, or maybe a whole day or two i heard. I already tried to charge it almost 3 days, still can get it to boot to fastboot or recovery.
And 1 more problem, my 9A only can be read by PC if I bypass the EDL using TEST POINT from my hardware, and i have tried many kinds of flashing tools and also downloaded a bunch or ROMs based on guides i read from forum here and there.
Please if you have the solution for my problem, it will means a lot to me.
Thx before.

cingcopa said:
Hola, ¿puedo molestarte para que me enseñes cómo recuperarte de tu 9a bricked y pasar a la pantalla negra?
Ya tengo este problema durante casi 2 meses y todavía no puedo encontrar la solución. Nuestra diferencia fue que ya instalé twrp y también flash rom y de repente se vuelve negro.
Una solución simple que leí es que se me acabó la batería, así que necesito cargarla durante unas horas, o tal vez uno o dos días completos, según escuché. Ya intenté cargarlo casi 3 días, todavía puedo hacer que arranque para fastboot o recovery.
Y 1 problema más, mi 9A solo se puede leer en una PC si paso por alto la EDL usando el PUNTO DE PRUEBA de mi hardware, y probé muchos tipos de herramientas de actualización y también descargué un montón de ROM según las guías que leí del foro aquí y allí.
Por favor, si tiene la solución para mi problema, significará mucho para mí.
Gracias antes.
Click to expand...
Click to collapse
Hola, ya encontraste una solución, estoy en el mismo caso

cingcopa said:
my 9A only can be read by PC if I bypass the EDL using TEST POINT from my hardware
Click to expand...
Click to collapse
Hello, from my understanding, if you can enter EDL, you could make a full reflash with SP Flasher, to revert to factory !
I have a slightly different problem, my 9A is in a bootloop, not possible to enter fastboot, no recovery.
I would like to use SP Flash tool, but i don't know the EDL hardware test-pins.
Please share a picture of the EDL hardware pins, if you know how to force enter EDL without adb/fastboot/twrp.
Thanks.

MaykoDiaz7 said:
Hola, ya encontraste una solución, estoy en el mismo caso
Click to expand...
Click to collapse
This PARKING..... problem(if u know what i mean), hunts me from 2021, and now is 2022 still there is no solution, and hopes the next post in this threads will be theards with with all the answers, because guess what what??
IT'S WHAT WE ALL HOPE FOR, A BETTER YEAR...
(Happy new year all btw )
And for sure i will post a solution right away to this tread, if i already have the solution.
btw some personel advice for you is
https://forum.xda-developers.com/t/xda-developers-forum-rules.4200559/
(esp rules 4)
(for those who don't like bull**** and think don't like bull**** just skip this next, or maybe owner thread can just remove this post also, no hard feelings or juding here ok, coz i really just tried to make a very very very little good deeds here just for a better year especially since C-19 for me and of course for us all. english was also not my mother tounge langguage, i'm not bother to spent a little more time using g-translate to respect other)

kukudro said:
Hello, from my understanding, if you can enter EDL, you could make a full reflash with SP Flasher, to revert to factory !
I have a slightly different problem, my 9A is in a bootloop, not possible to enter fastboot, no recovery.
I would like to use SP Flash tool, but i don't know the EDL hardware test-pins.
Please share a picture of the EDL hardware pins, if you know how to force enter EDL without adb/fastboot/twrp.
Thanks.
Click to expand...
Click to collapse
hello to there, thx for your reply..
attached there...
(unique approaced this one)

cingcopa said:
attached there...(unique approaced this one)
Click to expand...
Click to collapse
Hello,
I don't understand the meaning, you sent 3 pics containing a tweezer.
Was that a joke, sarcasm, or misunderstanding?
I had the impression that you already know the EDL test points for Redmi 9A.
I was just asking for a PCB picture with the EDL points marked for Redmi 9A (example I found for 9T, but PCB looks different : https://www.edlpoint.com/wp-content/uploads/2021/08/mi-9t-test-point.jpg)

kukudro said:
Hello,
I don't understand the meaning, you sent 3 pics containing a tweezer.
Was that a joke, sarcasm, or misunderstanding?
I had the impression that you already know the EDL test points for Redmi 9A.
I was just asking for a PCB picture with the EDL points marked for Redmi 9A (example I found for 9T, but PCB looks different : https://www.edlpoint.com/wp-content/uploads/2021/08/mi-9t-test-point.jpg)
Click to expand...
Click to collapse
"Please share a picture of the EDL hardware pins" from my understanding is that u are asking for hardware i used to by pass the edl mode. So sorry if im mistaken, im still newbie here. So forgive me if i misunderstood what u mean.
And btw, if you had the impresssion that i already know the EDL test points for Redmi 9A, why you still ask for the picture???
Was that a joke, sarcasm, or misunderstanding???
Nevertheless, here is the picture u asked for sir.